ZH
RU
ES
Procedure for Measuring Liquids
Procedure for Measuring Liquids, Total:240 items.
In the international standard classification, Procedure for Measuring Liquids involves: Metrology and measurement in general, Clothes, Acoustics and acoustic measurements, Air quality, Construction industry, Optics and optical measurements, Semiconductor devices, Non-destructive testing, Electronic components in general, Piezoelectric and dielectric devices, Measurement of fluid flow, Fluid power systems, Analytical chemistry, Sterilization and disinfection, Products of the chemical industry, Fibre optic communications, Measurement of volume, mass, density, viscosity, Linear and angular measurements, Equipment for petroleum and natural gas industries, Protection of and in buildings, Insulating fluids, Microbiology, Fertilizers, Construction of waterways and ports, Vocabularies, Non-ferrous metals, Powder metallurgy, Raw materials for rubber and plastics, Electricity. Magnetism. Electrical and magnetic measurements, Hydraulic fluids, Natural gas, Fuels, Products of the textile industry, Construction materials.
RU-GOST R, Procedure for Measuring Liquids
- GOST 8.586.5-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
- GOST R 8.732-2011 State system for ensuring the uniformity of measurements. State verification schedule for means measuring inductance
- GOST R 8.601-2003 State system for ensuring the uniformity of measurements. Pressure of saturated steams of crude oil and products from oil. Measurement procedure
- GOST R ISO 17123-1-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 1. Theory
- GOST 8.475-1982 State system for ensuring the uniformity of measurements. Standard noise figure and equivalent noise temperature of amplifiers and receivers. Measurement procedure
- GOST 15528-1986 Instruments for measuring flowrate, volume or mass of flowing fluid and gas. Terms and definitions
- GOST 8.470-1982 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring volume of liquid
- GOST R 8.722-2010 State system for ensuring the uniformity of measurements. Conductometric liquid analyses. Verification procedure
- GOST R 8.701-2010 State system for ensuring the uniformity of measuremenets. Liquid purity measuring instruments. Verification procedure
- GOST R 8.785-2012 State system for ensuring the uniformity of measurements. Mass of hydrocarbon condensate, liquefied hydrocarbon gas and long distillate of light hydrocarbons. General requirement for procedure (methods) of measurements
- GOST 8.142-2013 State system for insuring the uniformity of measurements. The national traceability chain for instruments measuring the mass and volumetric (the mass and the volume) flow of liquid
International Organization for Standardization (ISO), Procedure for Measuring Liquids
- ISO 3635:1979 Title missing - Legacy paper document
- ISO 3635:1977 Title missing - Legacy paper document
- ISO 3635:1981 Size designation of clothes; Definitions and body measurement procedure
- ISO 1996-1:1982 Acoustics; Description and measurement of environmental noise; Part 1 : Basic quantities and procedures
- ISO 7077:1981 Measuring methods for building; General principles and procedures for the verification of dimensional compliance
- ISO 7235:1991 Acoustics; measurement procedures for ducted silencers; insertion loss, flow noise and total pressure loss
- ISO/CD 8426-1:2023 Hydraulic fluid power — Determination of derived displacement of positive displacement pumps and motors — Part 1: One-step and two-step Toet-method
- ISO 748:2007 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
- ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
- ISO 6073:1980 Hydraulic fluid power; Petroleum fluids; Prediction of bulk moduli
- ISO 7235:2003 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss
- ISO 4363:1993 Measurement of liquid flow in open channels; methods for measurement of suspended sediment
- ISO 4185:1980 Measurement of liquid flow in closed conduits; Weighing method
- ISO 18320:2020 Hydrometry — Measurement of liquid flow in open channels — Determination of the stage–discharge relationship
- ISO 26906:2009 Hydrometry - Fishpasses at flow measurement structures
- ISO 26906:2015 Hydrometry - Fishpasses at flow measurement structures
- ISO/TR 9212:2006 Hydrometry — Measurement of liquid flow in open channels — Methods of measurement of bedload discharge
- ISO 8316:1987 Measurement of liquid flow in closed conduits; Method by collection of the liquid in a volumetric tank
- ISO 2425:2010 Hydrometry - Measurement of liquid flow in open channels under tidal conditions
- ISO 4363:2002 Measurement of liquid flow in open channels - Methods for measurement of characteristics of suspended sediment
- ISO 8363:1986 Liquid flow measurement in open channels; General guidelines for the selection of methods
- ISO 14461-2:2005 | IDF 169-2:2005 Milk and milk products — Quality control in microbiological laboratories — Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
- ISO/DIS 9200:2023 Petroleum measurement systems — Metering of viscous and high temperature liquids
- ISO 14461-2:2005|IDF 169-2:2005 Milk and milk products — Quality control in microbiological laboratories — Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
- ISO 14461-2:2005 Milk and milk products - Quality control in microbiological laboratories - Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
- ISO 1100-1:1981 Liquid flow measurement in open channels — Part 1: Establishment and operation of a gauging station
- ISO 4375:1979 Measurement of liquid flow in open channels; Cableway system for stream gauging
- ISO 1438:2008 Hydrometry - Open channel flow measurement using thin-plate weirs
- ISO 1438:2017 Hydrometry - Open channel flow measurement using thin-plate weirs
- ISO 1070:2018 Hydrometry — Slope-area method
Canadian Standards Association (CSA), Procedure for Measuring Liquids
- CSA C380-08 UPD 2-2008 Test procedure for the measurement of energy consumption of set-top boxes (STBs) First Edition
GOSTR, Procedure for Measuring Liquids
- GOST R 58797-2020 Drinking bottled water. Determination of mass concentration of dissolved oxygen. Measurement procedure
- GOST R 58868-2020 Instrument rolling bearings. Deviation from the roundness of the surfaces of parts. Measurement procedure
- GOST R 50.04.08-2019 Conformity assessment system for the use of nuclear energy. Сonformity assessment in the form of tests. The procedure
PT-IPQ, Procedure for Measuring Liquids
ES-AENOR, Procedure for Measuring Liquids
- UNE 53-522-1991 Rubber test mixes. Preparation, mixing and vulcanizatoin. Equipment and procedures
Korean Agency for Technology and Standards (KATS), Procedure for Measuring Liquids
- KS I ISO 14956:2008 Air quality－Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- KS C IEC 60444-7:2016 Measurement of quartz crystal unit parameters ― Part 7: Measurement of activity and frequency dips of quartz crystal units
- KS B ISO 8316:2014 Measurement of liquid flow in closed conduits — Method by collection of the liquid in a volumetric tank
- KS B ISO 8316:2004 Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank
- KS B ISO 18320:2022 Hydrometry — Measurement of liquid flow in open channels — Determination of the stage–discharge relationship
- KS M 8309-2005(2018)
- KS B ISO 19232-2:2021 Non-destructive testing — Image quality of radiographs —Part 2: Determination of the image quality value using step/hole-type image quality indicators
- KS B 5516-2009(2019) Automatic level gauges for measuring the level of liquid in tanks
- KS A 0531-2016 Viscosity of liquid－Methods of measurement
- KS A 0601-2016 Methods of measuring specific gravity of liquid
- KS A 0601-2016(2021) Methods of measuring specific gravity of liquid
- KS B ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats
- KS B 5516-2009 Automatic level gauges for measuring the level of liquid in tanks
- KS M ISO 8309-2003(2008) Refrigerated light hydrocarbon fluids－Measurement of liquid levels in tanks containing liquefied gases－Electrical capacitance gauges
- KS B ISO 8309:2003 Refrigerated light hydrocarbon fluids－Measurement of liquid levels in tanks containing liquefied gases－Electrical capacitance gauges
- KS B ISO 8309:2005 Refrigerated light hydrocarbon fluids-Measurement of liquid levels in tanks containing liquefied gases-Electrical capacitance gauges
- KS B 5516-1994 Automatic level gauges for measuring the level of liquid in tanks
- KS B ISO 1100-2:2020 Hydrometry — Measurement of liquid flow in open channels —Part 2: Determination of the stage-discharge relationship
- KS B 50117-2005(2020) Measuring systems for liquids other than water
- KS I ISO 7235:2004 Measurement procedures for ducted silencers-Insertion loss, flow noise and total pressure loss
- KS I ISO 7235:2014 Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss
- KS M ISO 4269-2014(2019) Petroleum and liquid petroleum products — Tank calibration by liquid measurement — Incremental method using volumetric meters
- KS B OIMLR 120-2006(2021) Standard capacity measures for testing measuring systems for liquids other than water
- KS B ISO TR 9209-2003(2013) Measurement of liquid flow in open channels－Determination of the wetline correction
- KS B ISO 8316-2014(2019) Measurement of liquid flow in closed conduits — Method by collection of the liquid in a volumetric tank
- KS M 1071-10-2007 Guide for determination of the viscosity of liquids of chemical substances
- KS C IEC 60332-1-3-2014(2019) Tests on electric and optical fibre cables under fire conditions — Part 1-3: Test for vertical flame propagation for a single insulated wire or cable — Procedure for determination of flaming droplets/
- KS B ISO 2425:2021 Hydrometry — Measurement of liquid flow in open channels under tidal conditions
- KS B ISO 2425:2015 Measurement of liquid flow in open channels under tidal conditions
- KS B ISO 4364:2020 Measurement of liquid flow in open channels —Bed material sampling
- KS M ISO 6073:2003 Petroleum products-Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
- KS M ISO 6073:2013 Petroleum products－Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
- KS I ISO 6570:2019 Natural gas ― Determination of potential hydrocarbon liquid content ― Gravimetric methods
- KS K 0937-2012 Geosynthetic barriers－Determination of permeability to liquids
- KS M 1071-7-2007 Guide for determination of the oxidizing properties(liquids) of chemical substances
Danish Standards Foundation, Procedure for Measuring Liquids
- DS/ISO 1996/1:1983 Acoustics. Description and measurement of environmental noise. Part 1: Basic quantities and procedures
- DS/EN 60444-7:2004 Measurement of quartz crystal unit parameters - Part 7: Measurement of activity and frequency dips of quartz crystal units
- DS/EN ISO 8316:1996 Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank
- DS/ISO 6073:1989 Hydraulic fluid power. Petroleum fluids. Prediction of bulk moduli
- DS/EN 24185:1993 Measurement of liquid flow in closed conduits. Weighing method
- DS/EN 24185:1994 Measurement of liquid flow in closed conduits - Weighing method
- DS/ISO 4185:1994 Measurement of liquid flow in closed conduits - Weighing method
- DS/ISO 14461-2:2007 Milk and milk products - Quality control in microbiological laboratories - Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
- DS/EN ISO 748:2008 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
BE-NBN, Procedure for Measuring Liquids
- NBN-ISO 7077:1992 Measuring methods for building - General principles and procedures for the verification of dimensional compliance
- NBN T 52-104-1977 Liquid fuels - Determination of lead content of gasoline - volumetric chromate method
International Telecommunication Union (ITU), Procedure for Measuring Liquids
- ITU-R S.1512 SPANISH-2001 Measurement procedure for determining non-geostationary satellite orbit satellite equivalent isotropically radiated power and antenna discrimination
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Procedure for Measuring Liquids
- JEDEC JESD24-7-1992 Commutating Diode Safe Operating Area Test Procedure for Measuring DV/DT During Reverse Recovery of Power Transistors Addendum to JEDEC JESD 24
British Standards Institution (BSI), Procedure for Measuring Liquids
- BS EN ISO 19232-2:2013 Non-destructive testing. Image quality of radiographs. Determination of the image quality value using step/hole-type image quality indicators
- BS 9000-7:1989 General requirements for a system for electronic components of assessed quality - Specification of lot formation, release procedures and certified test records
- BS EN ISO 8316:1988 Method of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank
- BS EN 61300-3-3:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Active monitoring of changes in attenuation and return loss
- BS EN 17111:2018 Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area. Test method and requirements (phase 2, step 2)
- BS PD IEC TR 63025:2021 Insulating liquids. Quantitative determination of methanol and ethanol in insulating liquids
- PD IEC TR 63025:2021 Insulating liquids. Quantitative determination of methanol and ethanol in insulating liquids
- BS ISO 14461-2:2005 Milk and milk products - Quality control in microbiological laboratories - Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
- BS ISO 26906:2009 Hydrometry - Fishpasses at flow measurement structures
- BS 3680-3D:1980 Measurement of liquid flow in open channels. Stream flow measurement. Moving-boat method
- BS 3680-5:1992 Measurement of liquid flow in open channels - Slope area method of estimation
- BS 3680-2A:1995 Measurement of liquid flow in open channels. Dilution methods. General
- BS 3680-10B:1980 Measurement of liquid flow in open channels. Sediment transport. Measurement of suspended sediment
- BS ISO 1438:2008 Hydrometry - Open channel flow measurement using thin-plate weirs
- BS ISO TR 8363:1998 Measurement of liquid flow in open channels - General guidelines for the selection of method
- BS ISO 18320:2020 Hydrometry. Measurement of liquid flow in open channels. Determination of the stage-discharge relationship
- BS ISO 23783-2:2022 Automated liquid handling systems - Measurement procedures for the determination of volumetric performance
- BS EN ISO 23783-2:2023 Automated liquid handling systems - Measurement procedures for the determination of volumetric performance
- BS ISO 15086-2:2000 Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe
ES-UNE, Procedure for Measuring Liquids
- UNE-EN 60444-7:2004 Measurement of queartz crystal unit parameters -- Part 7: Measurement of activity and frequency dips of quartz crystal units (Endorsed by AENOR in September of 2004.)
- UNE-EN 17111:2019 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)
- UNE-EN 14562:2007 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)
- UNE-EN 14563:2009 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments in the medical area - Test method and requirements (phase 2, step 2)
- UNE-EN 14561:2007 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)
- UNE-EN 17422:2023 Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of teat disinfectants used in the veterinary area - Test method and requirements (phase 2 step 2)
German Institute for Standardization, Procedure for Measuring Liquids
- DIN EN 60444-7:2004-11 Measurement of quartz crystal unit parameters - Part 7: Measurement of activity and frequency dips of quartz crystal units (IEC 60444-7:2004); German version EN 60444-7:2004
- DIN EN 29104:1993 Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991); German version EN 29104:1993
- DIN EN 17111:2018-12 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2); German version EN 17111:2018
- DIN EN ISO 10249:1999-07 Fluid fertilizers - Preliminary visual examination and preparation of samples for physical testing (ISO 10249:1996); German version EN ISO 10249:1999
- DIN EN ISO 8316:1995-11 Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987); German version EN ISO 8316:1995
- DIN EN 14562:2006-08 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2); German version EN 14562:2006
- DIN EN 24185:1993 Measurement of liqid flow in closed conduits; weighing method (ISO 4185:1980); German version EN 24185:1993
- DIN EN ISO 8316:1995 Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987); German version EN ISO 8316:1995
- DIN EN 14561:2006-08 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2); German version EN 14561:2006
- DIN EN 17422:2022-09 Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of teat disinfectants used in the veterinary area - Test method and requirements (phase 2 step 2); German version EN 17422:2022
- DIN 58909-1:2020 Haemostaseology - Determination of factor VIII coagulant activity (FVIII:C) - Part 1: Reference measurement procedure for the one-stage method; Text in German and English
HU-MSZT, Procedure for Measuring Liquids
Association Francaise de Normalisation, Procedure for Measuring Liquids
- NF X10-139*NF EN ISO 8316:1995 Measurement of liquid flow in closed conduits. Method by collection of the liquid in a volumetric tank.
- NF X10-301:2009 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats.
- NF T72-175/IN1:2013 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity in the medical area - Test method and requirements (phase 2, step 1)
- NF EN ISO 10249:1999 Engrais liquides - Examen visuel préliminaire et préparation des échantillons pour essais physiques
- NF X10-138*NF EN 24185:1994 Measurement of liquid flow in closed conduits. Weighing method.
- NF X10-341*NF ISO 9196:1992 Liquid flow measurement in open channels. Flow measurements under ice conditions.
- NF ISO 4362:1993 Mesure de débit des liquides dans les canaux découverts - Déversoirs à profil trapézoïdal
- NF ISO 9196:1992 Mesure de débit des liquides dans les canaux découverts - Mesurage de débit dans des conditions de glace
- X10-323:1990 Measurement of liquid flow in open channels. Determination of the wetline correction.
- NF ISO 9195:1992 Mesure de débit des liquides dans les canaux découverts - Échantillonnage et analyse des matériaux du lit graveleux
- NF C93-903-3:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3 : examinations and measurements - Active monitoring of changes in attenuation and return loss.
- NF X10-334:1993 Measurement of liquid flow in open channels. Measurement of discharge by the ultrasonic (acoustic) method.
- NF X10-331:1992 Liquid flow measurement in open channels. Slope-area method.
- NF X10-318*NF ISO 9826:1993 Liquid flow measurement in open channels. Parshall and saniiri flumes.
- FD X10-346:1996 Mesure de débit des liquides dans les canaux découverts - Échantillonnage des matériaux du lit
- NF EN 14562:2006 Désinfectants et antiseptiques chimiques - Essai quantitatif de porte germe pour l'évaluation de l'activité fongicide ou levuricide pour instruments utilisés en médecine humaine - Méthode d'essai et prescriptions (phase 2, étape 2)
- NF X10-969*NF ISO 18320:2020 Hydrometry - Measurement of liquid flow in open channels - Determination of the stage-discharge relationship
- NF EN 17111:2018 Désinfectants chimiques et antiseptiques - Essai quantitatif de porte-germe pour l'évaluation de l'activité virucide pour instruments utilisés en médecine - Méthode d'essai et exigences (phase 2, étape 2)
- NF X10-325:1986 Liquid flow measurement in open channels. Direct depth sounding and suspension equipment.
- NF EN ISO 8316:1995 Mesure de débit des liquides dans les conduites fermées - Méthode par jaugeage d'un réservoir volumétrique.
- NF X10-316:1990 Liquid flow measurement in open channels. Flat-V weirs.
- NF X10-120:1995 Measurement of conductive liquid flow in closed conduits. Method using electromagnetic flow meters.
- NF EN 14561:2007 Désinfectants chimiques et antiseptiques - Essai quantitatif de porte germe pour l'évaluation de l'activité bactéricide pour instruments utilisés en médecine humaine - Méthode d'essai et prescriptions (phase 2, étape 2)
- NF EN 17422:2022 Antiseptiques et désinfectants chimiques - Essai quantitatif de surface pour l'évaluation des désinfectants de trayons utilisés dans le domaine vétérinaire - Méthode d'essai et prescriptions (phase 2, étape 2)
- NF M08-038*NF ISO 2715:2020 Liquid hydrocarbons - Volumetric measurement by turbine flowmeter
- NF M07-027:1962 LIQUID FUELS. DETERMINATION OF VANADIUM IN FUEL OILS.
KR-KS, Procedure for Measuring Liquids
- KS B ISO 18320-2022 Hydrometry — Measurement of liquid flow in open channels — Determination of the stage–discharge relationship
- KS B ISO 19232-2-2021 Non-destructive testing — Image quality of radiographs —Part 2: Determination of the image quality value using step/hole-type image quality indicators
- KS B ISO 748-2021 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats
- KS B ISO 8309-2003 Refrigerated light hydrocarbon fluids－Measurement of liquid levels in tanks containing liquefied gases－Electrical capacitance gauges
- KS B ISO 1100-2-2020 Hydrometry — Measurement of liquid flow in open channels —Part 2: Determination of the stage-discharge relationship
- KS B ISO 2425-2021 Hydrometry — Measurement of liquid flow in open channels under tidal conditions
- KS B ISO 4364-2020 Measurement of liquid flow in open channels —Bed material sampling
- KS I ISO 6570-2019 Natural gas ― Determination of potential hydrocarbon liquid content ― Gravimetric methods
IN-BIS, Procedure for Measuring Liquids
Natural Gas Processor's Association (NGPA), Procedure for Measuring Liquids
American Society for Testing and Materials (ASTM), Procedure for Measuring Liquids
- ASTM E2414-05 Standard Test Method for Quantitative Sporicidal Three-Step Method (TSM) to Determine Sporicidal Efficacy of Liquids, Liquid Sprays, and Vapor or Gases on Contaminated Carrier Surfaces
Lithuanian Standards Office , Procedure for Measuring Liquids
- LST EN 60444-7-2004 Measurement of quartz crystal unit parameters. Part 7: Measurement of activity and frequency dips of quartz crystal units (IEC 60444-7:2004)
- LST EN ISO 10249:2003 Fluid fertilizers - Preliminary visual examination and preparation of samples for physical testing (ISO 10249:1996)
- LST EN ISO 8316:2001 Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987)
RO-ASRO, Procedure for Measuring Liquids
European Committee for Standardization (CEN), Procedure for Measuring Liquids
- EN 14675:2015 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (Phase 2@ step 1)
- EN ISO 748:2000 Measurement of Liquid Flow in Open Channels - Velocity-Area Methods ISO 748:1997
- EN ISO 748:2021 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
- EN ISO 748:2007 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
- EN ISO 7235:2003 Acoustics Laboratory measurement procedures for ducted silencers and air-terminal units Insertion loss, flow noise and total pressure loss ISO 7235:2003
International Electrotechnical Commission (IEC), Procedure for Measuring Liquids
- IEC 61300-3-17:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules
- IEC 61300-3-16:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules
- IEC 61300-3-2:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependence of a single-mode fibre optic device
- IEC 61300-3-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins
- IEC TR 63025:2021 Insulating liquids - Quantitative determination of methanol and ethanol in insulating liquids
- IEC 61300-3-3:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements; Active monitoring of changes in attenuation and return loss
CZ-CSN, Procedure for Measuring Liquids
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Procedure for Measuring Liquids
Japanese Industrial Standards Committee (JISC), Procedure for Measuring Liquids
未注明发布机构, Procedure for Measuring Liquids
- BS EN ISO 8316:1997(1999) Measurement of liquid flow in closed conduits — Method by collection of the liquid in a volumetric tank
- BS ISO 13689:2001 Refrigerated light hydrocarbon fluids — Measurement of liquid levels in tanks containing liquefied gases — Microwave - type level gauge
- BS ISO/TR 11974:1997(1999) Measurement of liquid flow in open channels — Electromagnetic current meters
- ASME MFC-2M-1983 Uncertainty in liquid flow measurements in sealed pipes
API - American Petroleum Institute, Procedure for Measuring Liquids
ZA-SANS, Procedure for Measuring Liquids
CO-ICONTEC, Procedure for Measuring Liquids
UY-UNIT, Procedure for Measuring Liquids
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Procedure for Measuring Liquids
- GB/T 8570.2-1988 Liquefied anhydrous ammonia--Estimating of ammonia content
- GB/T 17612-1998 Measurement of liquid flow in closed conduits--Weighing method
- GB/T 8570.3-1988 Liquefied anhydrous ammonia--Determination of residue content--Gravimetric method
- GB/T 8570.4-1988 Liquefied anhydrous ammonia--Determination of residue content--Titrimetric method
- GB/T 24960-2010 Refrigerated light hydrocarbon fluids-
Measurement of liquid levels in tanks containing liquefied gases- Electrical capacitance gauges
Professional Standard - Agriculture, Procedure for Measuring Liquids
- GB 8570.2-1988 Determination of ammonia content in liquid anhydrous ammonia
- GB 8570.3-1988 Gravimetric method for determination of residue content of liquid anhydrous ammonia
- GB 8570.4-1988 volumetric method for determination of residue content of liquid anhydrous ammonia
AT-ON, Procedure for Measuring Liquids
- ONORM EN 29104-1993 Measurement of fluid flow in closed conduits - Methods of evaluating the Performance of electromagnetic flow-meters forliquids (ISO 9104:1991)
Association of German Mechanical Engineers, Procedure for Measuring Liquids
AENOR, Procedure for Measuring Liquids
- UNE-EN ISO 8316:1996 MEASUREMENT OF LIQUID FLOW IN CLOSED CONDUITS. METHOD BY COLLECTION OF THE LIQUID IN A VOLUMETRIC TANK. (ISO 8316:1987).
- UNE-ISO 13689:2005 Refrigerated light hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Microwave-type level gauge.
- UNE-ISO 10574:2005 Refrigerated light-hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Float-type level gauges
- UNE-EN ISO 10249:2001 FLUID FERTILIZERS. PRELIMINARY VISUAL EXAMINATION AND PREPARATION OF SAMPLES FOR PHYSICAL TESTING. (ISO 10249:1996)
- UNE-EN 24185:1994 MEASUREMENT OF LIQUID FLOW IN CLOSED CONDUITS. WEIGHING METHOD.
- UNE-ISO 8309:2005 Refrigerated light hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Electrical capacitance gauges
American Society of Mechanical Engineers (ASME), Procedure for Measuring Liquids
American National Standards Institute （ANSI), Procedure for Measuring Liquids
IT-UNI, Procedure for Measuring Liquids
BELST, Procedure for Measuring Liquids
- STB 2299-2020 Measurement of liquid flow in closed conduits. Weighing method
NL-NEN, Procedure for Measuring Liquids
- NEN-ISO 4185:1994 Measurement of liquid flow in closed conduits. Weighing method (ISO 4185:1980)
International Dairy Federation (IDF), Procedure for Measuring Liquids
- IDF 169-2-2005 Milk and milk products - Quality control in microbiological laboratories - Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
VN-TCVN, Procedure for Measuring Liquids
- TCVN 2616-2008 Liquefied anhydrous ammonia for industrial use.Determination of water content.Volumetric method