ZH
RU
ES

Secondary and primary antibodies

Secondary and primary antibodies, Total:322 items.

In the international standard classification, Secondary and primary antibodies involves: Fertilizers, Equipment for petroleum and natural gas industries, General methods of tests and analysis for food products, Rubber and plastics products.


Professional Standard - Agriculture, Secondary and primary antibodies

(U.S.) Ford Automotive Standards, Secondary and primary antibodies

  • FORD ESH-M2G320-A-2015 ADHESIVE, EPOXY - ONE PART - ETHYLENE GLYCOL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESH-M2G251-A-2014 ADHESIVE, EPOXY - ONE PART - ETHYLENE GLYCOL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESL-M4D359-A3-2010 THERMOPLASTIC POLYESTER, NON-REINFORCED PBT - HIGH IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD FLTM BV 154-03-2007 TENSILE, SHEAR, AND PEEL ADHESION OF HEAT-CURING SEALERS AND HEAVY MASTIC ADHESIVES ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M4D255-A-2005 ABS MOLDING COMPOUND - HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M5B2-A-2002 ANTI-STATIC SOLUTION, CONCENTRATED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M5B217-A-2002 ANTI-STATIC SOLUTION - DILUTE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D582-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT), HIGH IMPACT, 40% MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M2D52-A-2004 HOSE, HIGH TEMPERATURE - LOW PRESSURE - OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4G183-D-2003 SEALER, HEAT EXPANDING, ANTI-FLUTTER ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M9G20-B2-2006 WAX, ANTI-FRICTION LUBRICANT, EMULSIFIABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D709-A-2009 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT HIGH IMPACT AND HIGH TENSILE STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A*
  • FORD ESB-M1A138-A-2002 STEEL WIRE, HARD DRAWN LOW TENSILE QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M2D218-A-2004 EPICHLOROHYDRIN RUBBER - FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M2D218-A-2009 EPICHLOROHYDRIN RUBBER - FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D762-A2-2010 POLYCARBONATE + POLYBUTHYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED MOLDING COMPOUND, HIGH IMPACT PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSH-M2D410-A-2004 POLYURETHANE (PUR) FOAM, BACTERIA/FUNGUS RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M1C165-A-2004 GREASE, HIGH TEMPERATURE, ANTI-FRICTION, LITHIUM HYDROXY TYPE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M96D19-A-2006 HOSE, REINFORCED RUBBER, FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M2D69-A-2004 RUBBER, NEOPRENE LATEX - COATING - OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M4D379-A-2006 NYLON (TYPE 6/6), MODIFIED - HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSA-M96D19-A2-2006 HOSE, REINFORCED RUBBER, FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M2D69-A-2009 RUBBER, NEOPRENE LATEX - COATING - OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D681-A-2005 ACETAL (POM) HOMOPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D353-A1-2008 NYLON (TYPE 6/6), MINERAL FILLED - HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D626-A1-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT, SE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D618-A2-2011 ACETAL (POM) COPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSF-M4D618-A-2011 ACETAL (POM) COPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD SA-M4D9605-A-2007 PVC MOLDING COMPOUND, FUEL RESISTANT - ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D464-A2-2010 ACETAL HOMOPOLYMER, MODIFIED - HIGH IMPACT GRADE - PIGMENTED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M18P11-B2-2014 ANTI-FLUTTER, VISCOELASTIC EXPANDING PERFORMANCE REQUIREMENT, HEAT CURING ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4G340-A-2014 SEALER, URETHANE BASED, HEAT CURING, PAINTABLE, ANTI-CRACKING ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D876-A1-2009 ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D813-A-2006 POLYCARBONATE + ABS BLEND, (PC+ABS) HIGH IMPACT, PLATING GRADE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D827-A4-2009 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT MEDIUM IMPACT SUPER HIGH FLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M3D73-B-2004 PHENOLIC MOLDING COMPOUND, FLOCK FILLED - MEDIUM IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M5B217-A2-2002 ANTI-STATIC SOLUTION - DILUTE ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M5B217-A
  • FORD WSS-M9G20-B3-2006 WAX, ANTI-FRICTION LUBRICANT, SOLID ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESK-M5B391-A2-2008 PHOSPHATE SOLUTION, ZINC, PASSIVATING SOLUTIONS, ANTI FOAM AGENT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D626-A2-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT, SE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D741-B1-2011 POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D670-A-2012 POLYPROPYLENE (PP) COPOLYMER, MEDIUM HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D670-A-2013 POLYPROPYLENE (PP) COPOLYMER, MEDIUM HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D706-A-2012 POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D706-B1-2013 POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D666-B1-2014 POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4G348-A-2015 SEALER, EXPANDING, PUMPABLE, ANTI-FLUTTER, 35 - 55 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4G348-A-2021 SEALER, EXPANDING, PUMPABLE, ANTI-FLUTTER, 35 - 55 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1A341-A11-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1)
  • FORD WSS-M1A341-A12-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1)
  • FORD ESB-M4D175-A-2006 POLYPROPYLENE (PP), MEDIUM IMPACT - MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** (USE ESA-M4D190-A)
  • FORD ESB-M6J156-A-2012 PRIMER SURFACER, 2-COMPONENT, CHIP RESISTANT THERMOPLASTIC SUBSTRATES ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1028-A2-2013 POLYPROPYLENE (PP) COPOLYMER, MEDIUM IMPACT COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1A341-A1-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (No direct replacement, use CBP strategy)
  • FORD ESF-M4D298-A-2006 POLYPROPYLENE MOLDING COMPOUND, EXTRA HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D744-A5-2021 ACETAL (POM) MOLDING COMPOUND, HOMOPOLYMER, HIGH IMPACT, LOW VOC EMISSION, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESE-M8G173-A1-2006 GASKET, CELLULOSE - NITRILE RUBBER AND ANTISTICK COATED - LOW COMPRESSIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESP-M2D130-A2-2004 ETHYLENE ACRYLIC RUBBER, LOW TEMPERATURE RESISTANT-TEAR RESISTANT - OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D800-A-2010 POLYETHYLENE (PE), HIGH DENSITY, HIGH MELT FLOW RATE, LOW IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99C132-A1-2010 ADDITIVE, AUTOMATIC TRANSMISSION, ANTI-SQUAWK FRICTION MODIFIER ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M99J315-A-2012 CHIP RESISTANT REPAIR COATING - TWO-COMPONENT URETHANE - PAINTABLE - LOW BAKE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2F178-A2-2013 FABRIC, VINYL COATED, ANTI-SQUEAK FINISH ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2F178-A1)
  • FORD WSB-M4G348-A-2007 SEALER, EXPANDING, PUMPABLE, ANTI-FLUTTER, 35 - 55 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSD-M1A284-B-2002 STEEL, SCREWS AND BOLTS SURFACE HARDENED 1000 N/MM2 TENSILE STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D706-A4-2021 POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED WEATHERABLE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

American Society of Civil Engineers (ASCE), Secondary and primary antibodies

  • ASCE 41140-2011 Guidelines For Seismic Evaluation And Design Of Petrochemical Facilities (Second Edition)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Secondary and primary antibodies

  • GB/T 10212-1988 The determination of granula average crushing strength for monoammonium phosphate and diammonium phosphate
  • GB/T 23373-2009 Determination of butylated hydroxyl anisole(BHA)、dibutylated hydroxyl toluene(BHT)and tertiary butyl hydroquinone(TBHQ)in foods

Hunan Provincial Standard of the People's Republic of China, Secondary and primary antibodies

  • DB43/T 2029-2021 Technical regulations for "one two three" reduction and control of drug-resistant weeds in paddy fields

PL-PKN, Secondary and primary antibodies

  • PN C04404-24-1986 Pigments for paints General methods of test Determination of resistance to sulphur dioxide

US-CFR-file, Secondary and primary antibodies

  • CFR 9-113.455-2014 Animals and animal products. Part113:Standard requirements. Section113.454:Clostridium Perfringens Type D Antitoxin.

Society of Automotive Engineers (SAE), Secondary and primary antibodies

  • SAE AS54381-1-1995 AS54381-390 Nut, Self Locking, Extended Washer, Double Hexagon - for Use with Impedance Type Bolts
  • SAE AS64379-1-2004 AS64379-380 Nut, Self-Locking, Extended Washer, Double Hexagon – for Use with Impedance Type Bolts
  • SAE AS64379-2-2022 AS64379-380 NUT, SELF LOCKING, EXTENDED WASHER, DOUBLE HEXAGON - FOR USE WITH IMPEDANCE TYPE BOLTS
  • SAE AS54381-2-2023 AS54381-390 Nut, Self Locking, Extended Washer, Double Hexagon - for Use with Impedance Type Bolts

US-FCR, Secondary and primary antibodies

Association Francaise de Normalisation, Secondary and primary antibodies

  • NF M87-229-3*NF EN ISO 15156-3:2011 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3 : cracking-resistant CRAs (corrosion-resistant alloys) and other alloys.
  • NF M87-229-2*NF EN ISO 15156-2:2011 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2 : cracking-resistant carbon and low-alloy steels, and the use of cast irons.

Defense Logistics Agency, Secondary and primary antibodies

Military Standards (MIL-STD), Secondary and primary antibodies

American Society for Testing and Materials (ASTM), Secondary and primary antibodies

  • ASTM D1938-06 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
  • ASTM D1938-02 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
  • ASTM D1938-94 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
  • ASTM D1938-08 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method

  Primary antibody detection and secondary antibody detection, How to combine primary and secondary antibodies, Secondary and primary antibodies, The relationship between primary antibody and secondary antibody, Flow secondary antibody combined with primary antibody first, Primary Antibody Secondary Antibody and Label, Where does the secondary antibody bind to the primary antibody?, Primary antibody and secondary antibody combined first, How to combine primary and secondary antibodies.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved