ZH
RU
ES

Oriental Laboratory Equipment

Oriental Laboratory Equipment, Total:498 items.

In the international standard classification, Oriental Laboratory Equipment involves: Analytical chemistry, Environmental testing, Valves, Farming and forestry, Education, Open systems interconnection (OSI), Applications of information technology, Corrosion of metals, Quality, Acoustics and acoustic measurements, Ventilators. Fans. Air-conditioners, Energy and heat transfer engineering in general, Services, Equipment for processing of minerals, Electrical and electronic testing, Agricultural machines, implements and equipment, Environmental protection, Laboratory medicine, Sterilization and disinfection, Vocabularies, Nuclear energy engineering, Radiation protection, Products of non-ferrous metals, Graphical symbols, Organic chemicals, Installations in buildings, Electromagnetic compatibility (EMC), Technical product documentation, Equipment for the chemical industry, Test conditions and procedures in general, Metrology and measurement in general, Medical equipment, Measurement of volume, mass, density, viscosity, Rectifiers. Convertors. Stabilized power supply, Fuels, Shafts and couplings, Protection of and in buildings, Electricity. Magnetism. Electrical and magnetic measurements, Industrial automation systems, Resistors, Microbiology, Earthworks. Excavations. Foundation construction. Underground works, Air quality, Thermodynamics and temperature measurements, Standardization. General rules, Water quality, Construction materials, Occupational safety. Industrial hygiene, Safety of machinery, Biology. Botany. Zoology, Pulps, Power transmission and distribution networks, Electrical engineering in general, Medical sciences and health care facilities in general.

European Committee for Standardization (CEN), Oriental Laboratory Equipment

EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN ISO 19001:2013 In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample

British Standards Institution (BSI), Oriental Laboratory Equipment

BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods
BS ISO 27327-2:2014 Fans. Air curtain units. Laboratory methods of testing for sound power
BS ISO 22856:2009 Equipment for crop protection. Methods for the laboratory measurement of spray drift. Wind tunnels
BS ISO 22856:2008 Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels
BS EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of Materials
BS EN 61010-2-101:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for in vitro diagnostic (IVD) medical equipment
BS EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of material
BS EN IEC 61010-2-051:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
BS EN 61010-2-051:2003 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
BS 3202-1:1991 Laboratory furniture and fittings. Introduction
BS EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of materials
BS EN 61326-2-6:2006 Electrical equipment for measurement, control and laboratory use - EMC requirements - Particular requirements - In vitro diagnostic (IVD) medical equipment
BS 3202-2:1991 Laboratory furniture and fittings - Specification for performance
BS DD CEN/TS 15443:2006 Solid recovered fuels — Methods for laboratory sample preparation
BS DD CEN/TS 15443:2007 Solid recovered fuels. Methods for laboratory sample preparation
BS EN 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for laboratory centrifuges
BS EN 15443:2011 Solid recovered fuels. Methods for the preparation of the laboratory sample
BS EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
BS EN 61010-2-081:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
20/30419178 DC BS EN 61010-2-051 AMD1. Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
BS EN ISO 3822-1:1999+A1:2008 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Method of measurement
BS EN 61010-2-010:1993 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of materials
BS IEC 61010-3-051:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring
BS EN IEC 61010-2-081:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
BS EN IEC 61010-2-120:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular safety requirements for machinery aspects of equipment
BS EN 61010-2-020:2017 Tracked Changes. Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for laboratory centrifuges
BS IEC 61010-3-010:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
BS EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for control equipment
BS EN IEC 61010-2-011:2021+A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for refrigerating equipment
PD 6632:1998 Biotechnology. Laboratories for research, development and analysis. Guidance on the selection of equipment needed for biotechnology laboratories according to the degree of hazard
BS EN 15413:2011 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
BS EN ISO 10140-5:2010 Acoustics. Laboratory measurement of sound insulation of building elements. Requirements for test facilities and equipment
BS EN ISO 10140-5:2011 Acoustics. Laboratory measurement of sound insulation of building elements. Requirements for test facilities and equipment
BS EN ISO 10140-5:2021 Acoustics. Laboratory measurement of sound insulation of building elements. Requirements for test facilities and equipment
BS EN IEC 61010-2-061:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
BS EN 61326:1998 Electrical equipment for measurement, control and laboratory use - EMC requirements
BS EN 61010-1:1993 Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements
BS EN ISO 5269-2:2004 Pulps. Preparation of laboratory sheets for physical testing - Rapid-Koethen method
BS EN IEC 61326-2-6:2021 Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. In vitro diagnostic (IVD) medical equipment
BS EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for refrigerating equipment
BS EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements
BS EN 61010-1:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - General requirements
BS EN 61010-2-045:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields
BS DD CEN/TS 15413:2006 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
DD CEN/TS 15413:2006 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample

Underwriters Laboratories (UL), Oriental Laboratory Equipment

UL 1262-1990 Laboratory equipment
UL 3101-2-20-1997 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Laboratory Centrifuges First Edition
UL 1262 BULLETIN-2003 UL Standard for Safety Laboratory Equipment
UL 1262 BULLETIN-2002 UL Standard for Safety Laboratory Equipment
UL 61010A-2-020-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Centrifuges First Edition
UL 61010A-2-010 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for the Heating of Materials
UL 61010A-2-051 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for Mixing and Stirring
UL 61010A-2-010-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for the Heating of Materials (First Edition)
UL 61010A-2-051-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for Mixing and Stirring (First Edition)
UL 61010A-2-020 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Centrifuges
UL 61010A-2-020 BULLETIN-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Centrifuges
UL 3101-1-1993 Electrical equipment for laboratory use; part 1: general requirements
UL 61010A-1-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 1: General Requirements First Edition; Reprint with Revisions Thru and Including 12/6/2002 [Superseded: UL 1262, UL 1262] [Replaced: UL 3101-1]
UL 61010A-2-051 (ND)-2002 National Differences For UL 61010A-2-051 Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for Mixing and Stirring (First Edition)
UL 61010A-2-010 (ND)-2002 National Differences For UL 61010A-2-010 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for the Heating of Materials (First Edition)
UL 61010-2-051 BULLETIN-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring
UL 61010-2-010-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Third Edition)
UL 61010-2-051-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring (Third Edition)
UL 61010-2-051-2019 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring (Fourth Edition)
UL 61010-2-010-2019 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Fourth Edition)
UL 61010A-2-041-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials and for Laboratory Processes First Edition
UL 61010A-2-020 (ND)-2002 National Differences For UL 61010A-2-020 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Centrifuges (First Edition)
UL 3101-1 BULLETIN-2001 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 1: General Requirements
UL 3101-1 BULLETIN-2000 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 1: General Requirements
UL 61010A-1 BULLETIN-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 1: General Requirements

Association Francaise de Normalisation, Oriental Laboratory Equipment

NF X15-205:1986 Laboratory equipment. Furnitures. Test methods.
NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
NF X15-204:1986 Laboratory equipment. Benches. Test methods.
NF X15-203:1987 LABORATORY EQUIPMENT. FUME CUPBOARDS. GENERAL. CLASSIFICATION. DIMENSIONS. SPECIFICATIONS.
NF X15-202:1986 Laboratory equipment. Furnitures. General. Classification. Dimensions. Specifications.
NF EN ISO 24998:2009 Matériel de laboratoire en matière plastique - Boîtes de Petri à usage unique pour méthodes microbiologiques
NF C42-020-2-010*NF EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of materials
NF X15-201:1986 Laboratory equipment. Benches. General. Classification. Dimensions. Specifications.
NF C42-720:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of material.
NF C42-020-2-010*NF EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of materials
NF C42-020-2-051/A11*NF EN IEC 61010-2-051/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
NF C42-020-2-051*NF EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
NF C42-020-2-051*NF EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
FD X15-055*FD CEN/TR 16589:2014 Laboratory installations - Capture devices with articulated extract arm
NF E90-110:1978 Field balancing equipment. Description and evoluation. Fth:laboratory methods in anechoic and semi-anechoic rooms.
NF C42-722:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring.
NF EN IEC 61010-2-010:2020 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-010 : exigences particulières pour appareils de laboratoire utilisés pour l'échauffement des matières
NF EN IEC 61010-2-051:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-051 : exigences particulières pour appareils de laboratoire utilisés pour mélanger et agiter
NF EN IEC 61010-2-051/A11:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-051 : exigences particulières pour appareils de laboratoire utilisés pour mélanger et agiter
NF C46-050-2-6:2006 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6 : particular requirements - In-vitro diagnostic (IVD) medical equipment.
NF X34-229*NF EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
FD CEN/TR 17078:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 61010-2-020:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 12485:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 10028-6:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 10028-2:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 10028-4:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF EN 1993-1-5/A1:2017 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-020 : exigences particulières pour centrifugeuses de laboratoire
NF C42-721:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020 : particular requirements for laboratory centrifuges.
NF C42-020-2-020*NF EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020 : particular requirements for laboratory centrifuges
NF EN ISO 4787:2021 Verrerie et matériel en plastique de laboratoire - Instruments volumétriques - Méthodes d'essai de la capacité et d'utilisation
NF C42-736/A1:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes.
NF S31-014:1982 ACOUSTICS. LABORATORY TESTS ON NOISE FORM TAPWARE AND HYDRAULIC EQUIPMENT USED IN WATER INSTALLATIONS. PART 1 : METHOD OF MEASUREMENT.
FD X42-205*FD CR 12739:1999 Biotechnology. Laboratories for research, development and analysis. Report on the selection of equipment needed for biotechnology laboratories according to the degree of hazard.
FD CR 12739:1999 Biotechnologie - Laboratoires de recherche, développement et analyse - Rapport sur le choix des équipements nécessaires dans les laboratoires de biotechnologie en fonction du degré de danger.
NF C42-020-2-081*NF EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
NF C42-020-2-081*NF EN IEC 61010-2-081:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
NF EN IEC 61010-2-081:2020 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-081 : exigences particulières pour les appareils de laboratoire, automatiques et semi-automatiques, destinés à l'analyse et à d'autres us...
NF C46-050/A3:2004 Electrical equipment for measurement, control and laboratory use - EMC requirements.
NF C42-020-2-120*NF EN IEC 61010-2-120:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120 : particular safety requirements for machinery aspects of equipment
NF X34-227*NF EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
NF EN IEC 61010-2-120:2018 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-120 : exigences de sécurité particulières pour les aspects des appareils relatifs aux machines
NF S31-049-5:2013 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: requirements for test facilities and equipment

German Institute for Standardization, Oriental Laboratory Equipment

DIN EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods; English version of DIN EN 14727:2006-03
DIN 12915:1994 Laboratory furniture; sinks for laboratory benches
DIN 12912:1977 Laboratory furniture; ceramic tiles for laboratory bench tops
DIN 12918-1:1999 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN 12918-2:2002 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN 12918-2:2009 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN 12918-2:2009-09 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN 12918-1:1999-05 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN 30665-1:1982 Gas-appliances; gas-burners for laboratory use (laboratory burners)
DIN 12918-4:2004 Laboratory equipment - Laboratory fittings - Part 4: Valves for pure gases
DIN 12918-4:2004-11 Laboratory equipment - Laboratory fittings - Part 4: Valves for pure gases
DIN 12918-3:2004 Laboratory equipment - Laboratory fittings - Part 3: Valves for technical gases
DIN 12918-3:2004-11 Laboratory equipment - Laboratory fittings - Part 3: Valves for technical gases
DIN V 12900-3:2001 Laboratory data communication - Part 3: Device profiles for laboratory apparatus
DIN 12876-3:2001 Electrical laboratory devices - Laboratory circulators and baths - Part 3: Determination of ratings of laboratory baths
DIN 12876-3:2001-12 Electrical laboratory devices - Laboratory circulators and baths - Part 3: Determination of ratings of laboratory baths
DIN 12876-1:2001 Electrical laboratory devices - Laboratory circulators and baths - Part 1: Terms and classification
DIN 12876-1:2001-12 Electrical laboratory devices - Laboratory circulators and baths - Part 1: Terms and classification
DIN 25412-2:2000 Laboratory equipment - Gloves boxes - Part 2: Leakage test
DIN 25412-2:2015 Laboratory equipment - Glove boxes - Part 2: Leakage test
DIN 12880:2007-05 Electrical laboratory devices - Heating ovens and incubators
DIN 4704-2:1999 Thermal testing of heating appliances - Part 2: Open test booth
DIN EN 61010-2-010:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials (IEC 61010-2-010:2003); German version EN 61010-2-010:2003
DIN 58121:1993 Teaching, learning and training equipment; laboratory glassware
DIN 25412-2:2015-12 Laboratory equipment - Glove boxes - Part 2: Leakage test
DIN EN 61010-2-051:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2003); German version EN 61010-2-051:2003
DIN 25412-1:1988 Laboratory equipment; glove boxes; dimensions and requirements
DIN 25412-1:2015 Laboratory equipment - Glove boxes - Part 1: Dimensions and requirements
DIN 12924-3:2011 Laboratory furniture - Fume cupboards - Part 3: Opposite-sided sash fume cupboards
DIN 25412-1 Beiblatt 1:2015-12 Laboratory equipment - Glove boxes - Part 1: Dimensions and requirements; Supplement 1: Examples for accessoires
DIN 25412-1:2015-12 Laboratory equipment - Glove boxes - Part 1: Dimensions and requirements
DIN VDE 0789-100:1984 Classrooms and laboratories fitments equipment and furniture safety specification for powered constructional units [VDE Specification]
DIN 58956-2:1986 Medical microbiology; medical microbiological laboratories; requirements for equipment
DIN 12924-4:2012 Laboratory furniture - Fume cupboards - Part 4: Fume cupboards for pharmacies
DIN 12876-2:2001 Electrical laboratory devices - Laboratory circulators and baths - Part 2: Determination of ratings of heating and refrigerated circulators
DIN 12924-3:1993 Laboratory furniture; fume cupboards; two-sided cupboards; main dimensions, requirements, tests
DIN 12876-2:2001-12 Electrical laboratory devices - Laboratory circulators and baths - Part 2: Determination of ratings of heating and refrigerated circulators
DIN V 12900-4:2002 Laboratory data communication - Part 4: Device profiles for DIN-measurement-bus
DIN 58956-2:1986-01 Medical microbiology; medical microbiological laboratories; requirements for equipment
DIN VDE 0100-723:2005 Erection of low-voltage installations - Requirements for special installations or locations - Part 723: Class-rooms with experimental equipment

US-FCR, Oriental Laboratory Equipment

FCR FED H-08-1 SEC 11714-2002 LABORATORY WASHING EQUIPMENT
FCR FED H-08-1 SEC 11614-1983 LABORATORY WASHING EQUIPMENT
FCR VA 11 53 61-2011 CUSTOM FABRICATED LABORATORY EQUIPMENT
FCR UFGS-11 53 00-2011 LABORATORY EQUIPMENT AND FUMEHOODS
FCR FED FCGS 11601-1981 LABORATORY EQUIPMENT AND FUME HOODS
FCR AF 91-90-1997 PRECISION MEASUREMENT EQUIPMENT LABORATORY (PMEL)
FCR AF 127-90-1987 PRECISION MEASUREMENT EQUIPMENT LABORATORY (PMEL)
FCR VA 11 71 02-2011 LABORATORY WASHING AND STERILIZING EQUIPMENT
FCR FED H-08-6 SEC 537-1972 LIST OF PHOTOGRAPHIC LABORATORY EQUIPMENT SYMBOLS
FCR COE EM 1110-2-1909-1970 CALIBRATION OF LABORATORY SOILS TESTING EQUIPMENT
FCR COE EM 1110-2-1909 CHANGE 1-1986 CALIBRATION OF LABORATORY SOILS TESTING EQUIPMENT
FCR FED H-08-6 SEC 511-1978 LIST OF LABORATORY FURNITURE EQUIPMENT SYMBOLS ERRATA
FCR AFM 32-1094-2009 CRITERIA FOR AIR FORCE PRECISION MEASUREMENT EQUIPMENT LABORATORY DESIGN AND CONSTRUCTION
FCR AF M32-1094-1998 CRITERIA FOR AIR FORCE PRECISION MEASUREMENT EQUIPMENT LABORATORY DESIGN AND CONSTRUCTION
FCR FED H-08-6 SEC 516-1977 LIST OF LABORATORY WASHING AND MISCELLANEOUS HOSPITAL EQUIPMENT SYMBOLS

国家市场监督管理总局、中国国家标准化管理委员会, Oriental Laboratory Equipment

GB/T 40024-2021 Laboratory instruments and equipment—Taxonomy
GB/T 36937-2018 Environmental consciousness design for laboratory instruments and equipments
GB/T 39556-2020 Intelligent laboratory—Instruments and equipment—Communication requirements
GB/T 39555-2020 Intelligent laboratory—Instruments and equipment—Data interface of climatic and environmental testing equipment
GB/T 40326-2021 Energy efficiency grades for laboratory equipment—Drug stability test chambers

Canadian Standards Association (CSA), Oriental Laboratory Equipment

CSA C22.2 No.151-M1986 UPD 2-1989 Laboratory Equipment Second Edition
CSA C22.2 No.151-M1986-1986 Laboratory Equipment Second Edition
CSA C22.2 No.61010-2-051-04-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring Second Edition
CSA C22.2 No.61010-2-010-04-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials Second Edition
CSA C22.2 No.61010-2-045-04-2004 R鑗les de s閏urit?pour appareils 閘ectriques de mesurage, de r間ulation et de laboratoire Partie 2-045: Prescriptions particuli鑢es pour appareils de d閟infection/lavage utilis閟 dans les domaines m閐ical, pharmaceutique, v閠閞inaire et en laboratoire
CAN/CSA-C22.2 NO.61010-2-020-2009 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (Second Edition)
CSA C22.2 No.61010-2-020-09-CAN/CSA-2009 Safety requirements for electrical equipment for measurement, control, and laboratory use ?Part 2-020: Particular requirements for laboratory centrifuges Second Edition
CSA C22.2 No.61010-2-081-01-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-081: Particular requirements for automatic and semiautomatic laboratory equipment for analysis and other purposes First Edition; IEC 61010-2-081:2001

Shandong Provincial Standard of the People's Republic of China, Oriental Laboratory Equipment

DB37/T 1861-2011 Requirements for the construction of animal disease diagnostic laboratories in villages and towns in Shandong Province

HU-MSZT, Oriental Laboratory Equipment

PL-PKN, Oriental Laboratory Equipment

PN C53012 Porcelain laboratory equipment -- Cups
PN J80501-1990 Devices and forniture for isotope laboratories Tables

United States Navy, Oriental Laboratory Equipment

NAVY UFGS-11 53 00-2011 LABORATORY EQUIPMENT AND FUMEHOODS
NAVY UFGS-11 53 00-2008 LABORATORY EQUIPMENT AND FUMEHOODS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Oriental Laboratory Equipment

GB/T 21747-2008 Educational laboratory equipment.Safety requirements and test methods for laboratory workbenches
GB/Z 27427-2022 Guidance to management of laboratory equipment
GB/T 29252-2012 Rule of the quality inspection of laboratory instruments and equipments
GB 4793.6-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for the heating of materials
GB 4793.3-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for mixing and stirring
GB/T 29253-2012 Major graphical symbols for laboratory instruments and equipment
GB/T 30096-2013 Major letter symbols for laboratory instrument and equipment
GB/T 32708-2016 Safety requirements for laboratory instrument and equipment.Autoclave
GB/T 29476-2012 General technical specification for mobile laboratory instruments and equipments
GB 4793.6-2008 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 6: Particular requirements for laboratory material heating equipment
GB 4793.7-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for alboratory centrifuges
GB 4793.3-2008 Safety requirements for electrical equipment for measurement,control,and laboratory use.Part3:Particular requirements for laboratory equipment for mixing and stirring
GB/T 32704-2016 Safety requirements for laboratory instrument and equipment.Balance instrument
GB/T 32705-2016 Safety requirements for laboratory instrument and equipment—Power supply for instrument and equipment
GB/T 31023-2014 Mobile laboratory.General specification for equipment operating condition test
GB/T 32706-2016 Safety requirements for laboratory instruments and equipments—Noise measuring instruments
GB/T 32707-2016 Safety requirements for laboratory instruments and equipments.Oxygen bomb calorimeter
GB 4793.7-2008 Safety requirements for electrical equipment for measurement,control,and labortory use.Part 7:Particular requirements for laboratory centrifuges
GB/T 32709-2016 Safety requirements for laboratory instruments and equipments.Industry analysis instrument
GB 4793.4-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory process
GB/T 42125.14-2023 Safety requirements for electrical equipment for measurement, control and laboratory use—Part 14:Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other pu
GB 4793.9-2013 Safety requirements for electrical equipment for measurement, control and laboratory use.Part 9:Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
GB/T 18268-2000 Electrical equipment for measurement,control and laboratory use--EMC requirements

Korean Agency for Technology and Standards (KATS), Oriental Laboratory Equipment

KS D 0299-2019 Laboratory method for the preparation of rust grades
KS C IEC 61010-2-051:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
KS C IEC 61010-2-10:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-10:Particular requirements for laboratory equipment for the heating of materials
KS C IEC 61010-2-10:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-10: Particular requirements for laboratory equipment for the heating of materials
KS F ISO 3822-1:2022 Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement
KS F ISO 3822-1:2014 Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement
KS C IEC 61010-2-51:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-51:Particular requirements for laboratory equipment for mixing and stirring
KS C IEC 61010-2-51:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-51: Particular requirements for laboratory equipment for mixing and stirring
KS P ISO 19001:2010 In virto diagnostic medical devices－Information supplied by the manufacturer with in vitro gnostic reagents for staining in biology
KS C IEC 61010-2-010:2018 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS F ISO 10140-5:2016 Laboratory measurement of sound insulation elements ― Part 5: Requirements for test facilities and equipment
KS F ISO 10140-5-2016(2021) Laboratory measurement of sound insulation elements ― Part 5: Requirements for test facilities and equipment
KS P ISO TR 18112:2009 Clinical laboratory testing and in vitro diagnostic test systems-In vitro diagnostic medical devices for professional use-Summary of regulatory requirements for information supplied by the manufacturer
KS F ISO 3822-1-2014(2019) Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement
KS C IEC 61010-2-020:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges
KS F ISO 3822-1:2004 Laboratory tests on noise emission from appliances and equipment used in water supply installations-Part 1:Method of measurement

Professional Standard - Education, Oriental Laboratory Equipment

JY/T 0374-2004 Laboratory equipment power supply system

Group Standards of the People's Republic of China, Oriental Laboratory Equipment

T/CAMS 57-2021 Energy efficiency test method for laboratory equipment —Centrifuges
T/LZZLXH 057-2021 Technical specification for laboratory equipment in primary and secondary schools
T/ZAMEE 12-2022 Standard for equipment management of environmental testing laboratories
T/QGCML 082-2021 Specifications for maintenance and management of laboratory testing equipment
T/QGCML 1122-2023 Laboratory equipment management system functional requirements
T/CAMS 58-2021 Energy efficiency test method for laboratory equipment—Box resistance furnace
T/CAMS 59-2021 Testing method of energy efficiency for laboratory equipment — Biochemical incubator
T/QGCML 706-2023 Specifications for the management of biological laboratory instruments and equipment
T/CAME 26-2021 Design of mobile nucleic acid detection cabin laboratory
T/LZZLXH 064-2021 Specifications for maintenance of laboratory testing instruments and equipment
T/CITS 0017-2022 Specifications for the construction of an open and shared platform for oil and gas laboratory instruments and equipment
T/HZQT 00006-2022 Textile Testing Laboratory Quality—Management Instrument and Equipment Period Verification

PT-IPQ, Oriental Laboratory Equipment

NP 3282-1988 Laboratory glassware Bottles
NP 3281-1988 Laboratory glassware Graduated measuring cylinders
NP 183-1959
NP 184-1959
NP 242-1961
NP 241-1961
NP 1858-1-1988 Laboratory glassware Graduated pipettes. Part 1: General requirements
NP EN 61326-2000 Electrical equipment for measurement,control and laboratory use EMC requirements(IEC 61326-1997)

Sichuan Provincial Standard of the People's Republic of China, Oriental Laboratory Equipment

DB51/T 692-2018 Technical specifications for laboratory equipment in primary and secondary schools
DB51/T 2159-2016 Maintenance Guide for Laboratory Testing Instruments and Equipment
DB51/T 2160-2016 Guidelines for Periodic Inspection of Laboratory Testing Instruments and Standard Materials

Professional Standard - Geology, Oriental Laboratory Equipment

DZ 63-1988 Classification and code of laboratory mineral processing equipment

International Organization for Standardization (ISO), Oriental Laboratory Equipment

ISO 22856:2008 Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels
ISO 27327-2:2014 Fans - Air curtain units - Part 2: Laboratory methods of testing for sound power
ISO 19001:2002 In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
ISO 19001:2013 In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
ISO/PRF TS 7013 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
ISO/TR 18112:2006 Clinical laboratory testing and in vitro diagnostic test systems - In vitro diagnostic medical devices for professional use - Summary of regulatory requirements for information supplied by the manufacturer
ISO 3822-1:1983 Acoustics; Laboratory tests on noise emission from appliances and equipment used in water supply installations; Part 1 : Method of measurement
ISO/TS 7013:2023 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
ISO 3822-1:1977 Title missing - Legacy paper document
ISO 3822-1:1999 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement
ISO 5269-2:1980 Pulps — Preparation of laboratory sheets for physical testing — Part 2: Rapid-Koethen method

Zhejiang Provincial Standard of the People's Republic of China, Oriental Laboratory Equipment

DB3306/T 039-2021 Soil sample preparation laboratory construction specification

Professional Standard - Machinery, Oriental Laboratory Equipment

JB/T 7439.3-1994 Terminology relating to laboratory instruments - Climatic and environmental test equipment

RU-GOST R, Oriental Laboratory Equipment

GOST R ISO 5696-2002 Trailers of tractors. Brakes and braking devices. Laboratory test method
GOST IEC 61010-2-010-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST 23932-1990 Laboratory glassware and equipment. General specifications
GOST R 54228-2010 Solid recovered fuels. Methods for laboratory sample preparation
GOST IEC 61010-2-010-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST IEC 61010-2-051-2014 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
GOST IEC 61010-2-051-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
GOST 33509-2015 Solid recovered fuel. Methods for laboratory sample preparation
GOST R ISO 27327-1-2012 Fans. Air curtain units. Part 1. Laboratory methods of testing for aerodynamic performance rating
GOST 4.321-1985 Product-quality index system. Laboratory ware and equipment made of quartz and porcelain. Nomenclature of indices
GOST R 51522.1-2011 Electromagnetic compatibility of technical equipment. Electrical equipment for measurement, control and laboratory use. Part 1. General requirements and test methods
GOST IEC 61010-2-020-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
GOST 25336-1982 Laboratory glassware and equipment. Basic parameters and dimensions
GOST 33510-2015 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST R 54229-2010 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST IEC 61010-2-020-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
GOST R IEC 61010-2-010-1999 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST 17644-1983 Turf. Methods of sampling from deposit and preparation of samples for laboratory tests
GOST IEC 61010-2-081-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-081. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
GOST R IEC 61010-2-051-1999 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring

US-VA, Oriental Laboratory Equipment

VA FED H-08-6 SEC 516-1977 LIST OF LABORATORY WASHING AND MISCELLANEOUS HOSPITAL EQUIPMENT SYMBOLS

American Society for Testing and Materials (ASTM), Oriental Laboratory Equipment

ASTM G97-97(2002)e1 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM G97-97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM E1989-98 Standard Specification for Laboratory Equipment Control Interface (LECIS)
ASTM E1989-98(2004) Standard Specification for Laboratory Equipment Control Interface (LECIS)
ASTM E438-92(1996) Standard Specification for Glasses in Laboratory Apparatus
ASTM E438-92(2001)e1 Standard Specification for Glasses in Laboratory Apparatus
ASTM G97-97(2007) Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM E1133-86(2000) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM E1133-86(2022) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM E1133-86(2005) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM D4320-93 Standard Test Method for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters
ASTM D4320-02 Standard Test Method for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters
ASTM E1133-86(2010) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM F2875-10(2015) Standard Guide for Laboratory Requirements Necessary to Test Commercial Cooking and Warming Appliances to ASTM Test Methods
ASTM F2875-10(2020) Standard Guide for Laboratory Requirements Necessary to Test Commercial Cooking and Warming Appliances to ASTM Test Methods

YU-JUS, Oriental Laboratory Equipment

JUS U.M1.052-1987 Concrete. Equipment for laboratories in concrete plants

SE-SIS, Oriental Laboratory Equipment

SIS SS 2095-1986 Heating equipment - Heat pumps - Laboratory testing of performance

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Oriental Laboratory Equipment

ASHRAE AT-96-9-3-1996 Evaluation of the Laboratory Equipment Component of Cooling Loads

IN-BIS, Oriental Laboratory Equipment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Oriental Laboratory Equipment

GB/T 2291-2016 Method for preparation of coal tar pitch specimens
GB/T 33709-2017 Mobile laboratory—Guidance on dissemination and traceability of the value of equipment

Danish Standards Foundation, Oriental Laboratory Equipment

DS/ISO 22856:2009 Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels
DS/EN 61010-2-010:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
DS/EN 61010-2-051:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
DS/EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
DS/EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
DS/EN 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
DS/IEC/TR 61010-3-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials
DS/IEC/TR 61010-3-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, Particular requirements for laboratory equipment for mixing and stirring
DS/CEN/CR 12739:1999 Biotechnology - Laboratories for research, development and analysis - Report on the selection of equipment needed for biotechnology laboratories according to the degree of hazard
DS/ISO 10140-5:2021 Acoustics – Laboratory measurement of sound insulation of building elements – Part 5: Requirements for test facilities and equipment
DS/EN 61010-2-081/A1:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
DS/IEC/TR 61010-3-081:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
DS/EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample

Japanese Industrial Standards Committee (JISC), Oriental Laboratory Equipment

JIS A 1424-1 AMD 1:2008 Method for laboratory tests on noise emission from appliances and equipments used in Water Supply Installations (Amendment 1)
JIS A 1424-1:1998 Method for laboratory tests on noise emission from appliances and equipments used in Water Supply Installations
JIS A 1424-1:2015 Method for laboratory tests on noise emission from appliances and equipments used in water supply installations
JIS A 1171:1978 Method of making test sample of polymer-modified mortar in the laboratory
JIS C 1806-1:2001 Electrical equipment for measurement, control and laboratory use -- EMC requirements

Professional Standard - Commodity Inspection, Oriental Laboratory Equipment

SN/T 4095.1-2015 Management specification of laboratory equipment intermediate check
SN/T 4239-2015 Management requirements for large equipment of chemical analysis in laboratory

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Oriental Laboratory Equipment

CEPT T/G 01-01 E-1987 Criteria for Accreditation of Testing Laboratories for Telecommunications Terminal Equipment
CEPT T/G 01-01-1987 Criteres D'Accreditation Des Laboratoires D'Essais D'Equipements Terminaux De Telecommunication
YEARBOOK-1994 Information on Approval Authorities Certification Bodies and Testing Laboratories for Telecommunications Terminal Equipment

Liaoning Provincial Standard of the People's Republic of China, Oriental Laboratory Equipment

DB21/T 1989-2012 General technical requirements for mobile laboratory equipment
DB21/T 2381-2014 Guidelines for Traceability and Transfer of Quantitative Value of Mobile Laboratory Instruments and Equipment

European Committee for Electrotechnical Standardization（CENELEC）, Oriental Laboratory Equipment

EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
EN 61010-2-101:2017 Safety requirements for electrical equipment for measurement@ control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
EN 61326-2-6:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
EN 61010-2-020:2006 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges
EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement@ control@ and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
EN 61326-2-6:2006 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment (Remains Current)
EN 61010-2-101:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
EN 61010-2-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Remains Current)

CENELEC - European Committee for Electrotechnical Standardization, Oriental Laboratory Equipment

EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement@ control@ and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of material
EN 61010-2-051:1995 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use Part 2-051: Particular Requirements for Laboratory Equipment for Mechanical Mixing and Stirring
EN 61010-2-020:1994 Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges
EN IEC 61010-2-120:2018 Safety requirements for electrical equipment for measurement@ control@ and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment
EN 61010-2-010:1994 Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Incorporates Amendment A1: 1996)

KR-KS, Oriental Laboratory Equipment

KS C IEC 61010-2-051-2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
KS C IEC 61010-2-010-2018(2023) Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS F ISO 3822-1-2022 Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement
KS C IEC 61010-2-010-2018 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS F ISO 10140-5-2016 Laboratory measurement of sound insulation elements ― Part 5: Requirements for test facilities and equipment
KS C IEC 61010-2-020-2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges
KS F 2329-2023 Method for preperation of soil cement compression and flexure test specimens in the laboratory

AENOR, Oriental Laboratory Equipment

UNE-EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
UNE-EN 61010-2-051:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
UNE-EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
UNE-EN 61010-2-081:2003 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
UNE-EN 61010-2-081/A1:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
UNE-EN 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006)
UNE-CR 12739:2000 BIOTECHNOLOGY. LABORATOIRES FOR RESEARCH, DEVELOPMENT AND ANALYSIS. REPORT ON THE SELECTION OF EQUIPMENT NEEDED FOR BIOTECHNOLOGY LABORATORIES ACCORDING TO THE DEGREE OF HAZARD
UNE-EN 15413:2012 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample

U.S. Air Force, Oriental Laboratory Equipment

AIR FORCE AFM 32-1094-2009 CRITERIA FOR AIR FORCE PRECISION MEASUREMENT EQUIPMENT LABORATORY DESIGN AND CONSTRUCTION

American National Standards Institute （ANSI), Oriental Laboratory Equipment

ANSI/NCSL Z540-1-1994 Calibration -- Calibration Laboratories and Measuring and Test Equipment -- General Requirements
ANSI/ASTM F2875:2010 Guide for Laboratory Requirements Necessary to Test Commercial Cooking Appliances to ASTM Test Methods

International Electrotechnical Commission (IEC), Oriental Laboratory Equipment

IEC 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-101:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
IEC 61010-2-101:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
IEC 61010-2-101:2018 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
IEC 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-051:2018 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-010:2019 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61326:1998 Electrical equipment for measurement, control and laboratory use - EMC requirements
IEC 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:1995 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-010:2019 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61326-2-6:2005 Electrical equipment for measurement, control and laboratory use, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In-vitro diagnostic (IVD) medical equipment
IEC 61326-2-6:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
IEC 61010-2-020:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
IEC 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
IEC 61010-2-020:1992 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 2-020: particular requirements for laboratory centrifuges
IEC 61010-2-020:2016 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
IEC 61010-2-010:1992 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 2-010: particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-081:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-081:2001/AMD1:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and o
IEC 61010-2-081:2009 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-081:2001+AMD1:2003 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and o
IEC 61010-2-081:2019 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and ot
IEC 61326:1997 Electrical equipment for measurement, control and laboratory use - EMC requirements
IEC 61326:2002 Electrical equipment for measurement, control and laboratory use - EMC requirements
IEC 61326/COR1:2002 Electrical equipment for measurement, control and laboratory use - EMC requirements
IEC 61010-2-081/AMD1:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes; Amendment 1
IEC 61010-2-120:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment

TH-TISI, Oriental Laboratory Equipment

TIS 2002-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-010: particular requirements for laboratory equipment for the heating of materials
TIS 2009-2000 Safety requirement for electrical equipment for measurement, control and laboratory use.part 2: particular requirements for laboratory equipment for mixing and stirring
TIS 2003-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-020: particular requirements for laboratory centrifuges

ZA-SANS, Oriental Laboratory Equipment

SANS 61010-2-010:2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials
SANS 61010-2-101:2003 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
SANS 61326:2003 Electrical equipment for measurement, control and laboratory use - EMC requirements
SANS 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-020: Particular requirements for laboratory centrifuges

ES-UNE, Oriental Laboratory Equipment

UNE-EN IEC 61010-2-051:2021/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by AENOR in June of 2015.)
UNE-EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (Endorsed by Asociación Española de Normalización in June of 2017.)
UNE-EN IEC 61010-2-081:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (Endorsed by Asociación Española de N...

CEN - European Committee for Standardization, Oriental Laboratory Equipment

PD CEN/TS 15443:2006 Solid recovered fuels - Methods for laboratory sample preparation
PD CEN/TS 15413:2006 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample

Indonesia Standards, Oriental Laboratory Equipment

SNI ISO 19001:2009 In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology

BE-NBN, Oriental Laboratory Equipment

NBN-ISO 3822-1:1992 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1 : Method of measurement

Professional Standard - Certification and Accreditation, Oriental Laboratory Equipment

RB/T 199-2015 Technical code for evaluating biosafety performance of laboratory equipment

国家质量监督检验检疫总局, Oriental Laboratory Equipment

SN/T 4680-2016 Specification for preparation of technical requirements for laboratory instrument and equipment procurement

国家认证认可监督管理委员会, Oriental Laboratory Equipment

RB/T 143-2018 Laboratory Chemical Testing Instruments and Equipment Period Verification Guide

Lithuanian Standards Office , Oriental Laboratory Equipment

LST EN 15443-2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
LST EN 61010-2-010-2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials (IEC 61010-2-010:2014)
LST EN 61010-2-010-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010: Particular requirements for laboratory equipment for the heating of material (IEC 61010-2-010:2003)
LST EN 61010-2-051-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2003)
LST EN 61010-2-020-2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006)
LST EN 15413-2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample

ISA - International Society of Automation, Oriental Laboratory Equipment

ISA 82.02.02-1996 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use
ISA 82.02.04-1996 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use

Military Standard of the People's Republic of China-General Armament Department, Oriental Laboratory Equipment

GJB 150.3A-2009 Laboratory environmental test methods for military materiel.Part 3:High temperature test
GJB 150.9A-2009 Laboratory environmental test methods for military materiel.Part 9:Damp heat test
GJB 150.12A-2009 Laboratory environmental test methods for military materiel.Part 12:Sand and dust test
GJB 150.14A-2009 Laboratory environmental test methods for military materiel.Part 14:Immersion test
GJB 150.16A-2009 Laboratory environmental test methods for military materiel.Part 16:Vibration test
GJB 150.17A-2009 Laboratory environmental test methods for military materiel.Part 17:Acoustic noise test
GJB 150.18A-2009 Laboratory environmental test methods for military materiel.Part 18:Shock test
GJB 150.10A-2009 laboratory environmental test methods for military material.Part 10:Fungus test
GJB 150.15A-2009 Laboratory environmental test methods for military materiel.Part 15:Acceleration test
GJB 150.1A-2009 Laboratory environmental test methods for military materiel.Part 1:General requirements
GJB 150.5A-2009 Laboratory environmental test methods for military materiel.Part 5:Temperature shock test
GJB 150.20A-2009 Laboratory environmental test methods for military materiel.Part 20:Gunfire vibration test
GJB 150.22A-2009 Laboratory environmental test methods for military materiel.Part 22:Icing/freezing rain test
GJB 150.29-2009 Laboratory environmental test methods for military materiel.Part 29:Ballistic shock test
GJB 150.7A-2009 Laboratory environmental test methods for military material.Part 7:Solar radiation test
GJB 150.26-2009 Labortory environmental test methods for military materiel.Part 26:Contamination by fluids test
GJB 150.28-2009 Laboratory environmental test methods for military materiel.Part 28:Acidic atmosphere test
GJB 150.13A-2009 Laboratory environmental test methods for military materiel.Part 13:Explosive atmosphere test
GJB 150.25A-2009 Laboratory environmental test methods for military materiel.Part 25:Vibro-acoustic/temperature test
GJB 150.27-2009 Laboratory environmental test methods for military materiel.Part 27:Pyroshock test

未注明发布机构, Oriental Laboratory Equipment

GJB 150.11A-2009 Military equipment laboratory environmental test methods Part 11: Salt spray test
GJB 150.8A-2009 Military equipment laboratory environmental test methods Part 8: Rain test
GJB 150.4A-2009 Military equipment laboratory environmental test methods Part 4: Low temperature test
GJB 150.21A-2009 Military equipment laboratory environmental test methods Part 21: Wind pressure test
DIN EN ISO 3822-1:1999 Testing the noise behavior of fittings and devices for water installations in the laboratory Part 1: Measuring methods
GJB 150.23A-2009 Military Equipment Laboratory Environmental Test Methods Part 23: Tilt and Swing Tests
GJB 150.2A-2009 Military equipment laboratory environmental test methods Part 2: Low pressure (altitude) test

AT-OVE/ON, Oriental Laboratory Equipment

OVE EN 61010-2-051/AA-2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Amendment) (english version)

Association of German Mechanical Engineers, Oriental Laboratory Equipment

VDI 4221 Blatt 2-2017 Quality assurance - Requirements on interlaboratory tests in immission control - Design, performance and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions

CZ-CSN, Oriental Laboratory Equipment

CSN 45 0661-1988 Triaxial equipment for laboratory determination of shear strength of soils
CSN 45 0660-1988 Shear box equipment for laboratory determination of shear strength of soils
CSN 91 0912-1979 Laboratory furniture for work with radioactive materials. Common technical requirements.
CSN 44 1304-1989 Solid fuels. Methods of sampling and preparation of samples for laboratory testing

Hubei Provincial Standard of the People's Republic of China, Oriental Laboratory Equipment

DB42/T 1957-2023 Standards for checking management of common chemical measuring equipment in laboratories

国家市场监督管理总局, Oriental Laboratory Equipment

RB/T 039-2020 Testing Laboratory Instruments and Equipment Measurement Traceability Results Confirmation Guide

IEC - International Electrotechnical Commission, Oriental Laboratory Equipment

IEC TR 61010-3-010:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-010: Conformity Verification Report for IEC 61010-2-010@ Particular Requirements for Laboratory Equipment for the Heating of Materials (Edition 1.0)
IEC TR 61010-3-051:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-051: Conformity Verification Report for IEC 61010-2-051@ Particular Requirements for Laboratory Equipment for Mixing and Stirring (Edition 1.0)

Standard Association of Australia （SAA）, Oriental Laboratory Equipment

AS 1012.2:1994 Methods of testing concrete - Preparation of concrete mixes in the laboratory
AS 1012.2:2014 Methods of testing concrete, Method 2: Preparing concrete mixes in the laboratory

Professional Standard - Aviation, Oriental Laboratory Equipment

HB 6783.10-1993 Military airborne equipment climate environment test box (room) verification method sand dust test box (room)
HB 6783.3-1993 Military airborne equipment climate environment test chamber (room) verification method temperature test chamber (room)
HB 6783.6-1993 Military airborne equipment climate environment test box (room) verification method rain test box (room)
HB 6783.7-1993 Military airborne equipment climate environment test chamber (room) verification method damp heat test chamber (room)
HB 6783.8-1993 Military airborne equipment climate environment test box (room) verification method mold test box (room)
HB 6783.9-1993 Military airborne equipment climate environment test chamber (room) verification method Salt spray test chamber (room)
HB 6783.12-1993 Military airborne equipment climate environment test chamber (room) verification method Immersion test chamber (room)
HB 6783.4-1993 Military Airborne Equipment Climatic Environment Test Chamber (Chamber) Verification Method Temperature-Altitude Test Chamber (Chamber)
HB 6783.5-1993 Military airborne equipment climate environment test chamber (room) verification method solar radiation test chamber (room)
HB 7122.4-1994 Civil aircraft airborne equipment climate environment test box (room) verification method waterproof test box (room)
HB 7122.5-1994 Civil aircraft airborne equipment climate environment test box (room) verification method sand dust test box (room)
HB 7122.6-1994 Civil aircraft airborne equipment climate environment test chamber (room) verification method Salt spray test chamber (room)

Conference of European Post Telecommunication (CEPT), Oriental Laboratory Equipment

CEPT YEAR BOOK E-1992 Information on Certification, Approval and Testing Laboratories for Telecommunications Terminal Equipment

AT-ON, Oriental Laboratory Equipment

ONORM N 1500-2-1996 Food microbiology - Food hygienic microbiological laboratories - Requirements for the equipment

Henan Provincial Standard of the People's Republic of China, Oriental Laboratory Equipment

DB4117/T 285-2020 Technical guidelines for inspection of reference materials and instruments and equipment in agricultural product laboratories
DB4117/T 273-2020 Guidelines for the use, maintenance, repair and management of agricultural products laboratory instruments and equipment

Canadian General Standards Board （CGSB), Oriental Laboratory Equipment

CGSB 2.11-94 METH 2-CAN/CGSB-1994 Methods of Sampling and Testing Soaps and Detergents Laboratory Preparation of Samples

NATO - North Atlantic Treaty Organization, Oriental Laboratory Equipment

AMEDP-8.5-2017 MINIMUM TEST REQUIREMENTS FOR LABORATORY UNITS OF IN THEATRE MILITARY MEDICAL TREATMENT FACILITIES (MTFs) (ED A@ Ver. 2)

Xinjiang Provincial Standard of the People's Republic of China, Oriental Laboratory Equipment

DB65/T 4546-2022 Layout principles and basic equipment configuration specifications of plague field surveillance laboratories

IX-SA, Oriental Laboratory Equipment

AS 1012 Pt.2:1983