ZH
RU
ES

Other Mass Spec Equipment

Other Mass Spec Equipment, Total:281 items.

In the international standard classification, Other Mass Spec Equipment involves: Vocabularies, Installations in buildings, Chipless working equipment, Products of the chemical industry, Electromagnetic compatibility (EMC), Sports equipment and facilities, Acoustics and acoustic measurements, Iron and steel products, Hospital equipment, First aid, Special purpose vehicles, Elements of buildings, Non-textile floor coverings, Welding, brazing and soldering, Lifting equipment, Lamps and related equipment, Water quality, Measurement of fluid flow, Medical equipment, Power transmission and distribution networks, Valves, Pipeline components and pipelines, Shipbuilding and marine structures in general, Protection against fire, Rotating machinery, Galvanic cells and batteries, Small craft, Lighting, Quality, Electromechanical components for electronic and telecommunications equipment, Capacitors, Protective equipment, Electrical wires and cables, Telecommunication terminal equipment, Graphical symbols, Agricultural machines, implements and equipment, Products of the textile industry, Inorganic chemicals, Printed circuits and boards, Character sets and information coding, Earth-moving machinery, Electricity. Magnetism. Electrical and magnetic measurements, Electric traction equipment, Telecontrol. Telemetering, Soil quality. Pedology, Measurement of volume, mass, density, viscosity, Power stations in general, Analytical chemistry, Optoelectronics. Laser equipment, Optical equipment, Wastes, Construction industry, Nuclear energy engineering, Environmental testing, Freight distribution of goods, Electronic components in general, Insulation.

International Organization for Standardization (ISO), Other Mass Spec Equipment

ISO 29464:2011 Cleaning equipment for air and other gases - Terminology
ISO 3077:1984 Short link chain for lifting purposes; Grade T (8), calibrated, for chain hoists and other lifting appliances
ISO 3767-1:1998/Amd 1:2008 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 1: Common symbols; Amendment 1: Additional symbols
ISO 13695:2004 Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
ISO 6016:2008 Earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components
ISO 3767-1:1982 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment; Symbols for operator controls and other displays; Part 1 : Common symbols
ISO 3767-4:1993 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment; symbols for operator controls and other displays; part 4: symbols for forestry machinery

German Institute for Standardization, Other Mass Spec Equipment

DIN 24500-15:1972 Rolling mill equipment, rolling mills for steel, designation for other equipment
DIN 19217:1998 Measuring systems for liquids other than water - Definitions, requirements and testing (OIML R 117:1995)
DIN EN 20594-1:1995 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986); German version EN 20594-1:1993
DIN EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) (IEC 61189-3:2007); German version EN 61189-3:2008
DIN EN 50123-7-2:2003 Railway applications - Fixed installations; D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems; Isolating current transducers and other current measuring devices; German version EN 50123-7-2:2
DIN EN 60870-2-2:1998 Telecontrol equipment and systems - Part 2: Operating conditions; Section 2: Environmental conditions (climatic, mechanical and other non-electrical influences) (IEC 60870-2-2:1996); German version EN 60870-2-2:1996
DIN EN 12918:1999 Water quality - Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis; German version EN 12918:1999
DIN VDE 0100-551:2011 Low-voltage electrical installations - Part 5-55: Selection and erection of electrical equipment - Other equipment - Clause 551: Low-voltage generating sets (IEC 60364-5-55:2001/A2:2008 (Clause 551)); German implementation HD 60364-5-551:2010 + Cor. :2010
DIN EN ISO 13695:2004 Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers (ISO 13695:2004); German version EN ISO 13695:2004
DIN EN 61000-4-23:2001 Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques; Test methods for protective devices for HEMP and other radiated disturbances (IEC 61000-4-23:2000); German version EN 61000-4-23:2000
DIN VDE 0100-551:2017 Low-voltage electrical installations - Part 5-55: Selection and erection of electrical equipment - Other equipment - Clause 551: Low-voltage generating sets (IEC 60364-5-55:2001/A2:2008 (Clause 551)); German implementation of HD 60364-5-551:2010 + Cor.:20
DIN EN 16210:2013 Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment; German version EN 16210:2013
DIN EN ISO 11202:2009 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995); German version EN ISO 11202:2009
DIN EN 50181:2011 Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers; German version EN 50181:2010
DIN EN 61010-2-081:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2001 + A1:2003); German v

Association Francaise de Normalisation, Other Mass Spec Equipment

NF X44-001:1981 Cleaning equipment for air and other gases. Vocabulary.
NF C58-633:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications.
NF M88-790:2012 LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft.
NF S93-012:1997 Conical fittings with a 6 % (LUER) taper for syringes, needles and certain other medical equipment. Lock fittings.
NF T20-402:1982 Sodium chloride for industrial use. Determination of matter insoluble in water or in acid and preparation of principal solutions for other determination.
NF M88-790:2009 LPG Equipment and accessories - LPG propulsion systems for boats, yachts and other craft - Installation requirements.
NF S93-011:1993 Conical fittings with a 6 per cent (luer) taper for syringes, needles and certain other medical equipment. Part 1 : general requirements.
NF S31-503:1996 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level.
NF S31-502:1997 Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ.
NF ISO 6016:2009 Engins de terrassement - Méthodes de mesure des masses des engins de terrassement complets, de leurs équipements et de leurs organes constitutifs
NF S31-502*NF EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
NF F41-020-7-2*NF EN 50123-7-2:2004 Railway applications - Fixed installations - D.C. switchgear - Part 7-2 : measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices
NF S31-500*NF EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
NF C46-922*NF EN 60870-2-2:1997 Telecontrol equipment and systems. Part 2 : operating conditions. Section 2 : environmental conditions (climatic, mechanical and other non-electrical influences).
NF S31-500:1997 Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions.
NF T90-128*NF EN 12918:1999 Water quality - Determination of parathion, parathion-methyl and some other organophosphorous compounds in water by dichloromethane extraction and gas chromatographic analysis.
NF EN 50673:2019 Traversées de type embrochable, 72,5 kV, pour transformateurs à diélectrique liquide et autres équipements
NF U02-107:1996 TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT. SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS. PART 3 : SYMBOLS FOR POWERED LAWN AND GARDEN EQUIPMENT. (EUROPEAN STANDARD EN ISO 3767-3).
NF S10-126*NF EN ISO 13695:2005 Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
NF E58-076*NF ISO 6016:2009 Earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components
NF E58-076:1998 Earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components.
NF C42-736:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes.
NF S10-111-2:2001 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range.
NF S10-111-2*NF EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range
NF E58-011-2:1994 Earth-moving machinery. Symbols for operator controls and other displays. Part 2 : specific symbols for machines, equipment and accessories.
NF EN 300827:1999 Télécommunications - Compatibilité électromagnétique et spectre radioélectrique (ERM) - Norme de compatibilité électromagnétique (CEM) pour les appareils des réseaux radio transeuropéens (TETRA) et leurs auxiliaires.
NF U02-105-4:2009 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbol for operator controls and other displays - Part 4 : symbols for forestry machinery.
NF S31-504:1996 Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections.
NF U02-108:1996 TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT. SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS. PART 4 : SYMBOLS FOR FORESTRY MACHINERY. (EUROPEAN STANDARD EN ISO 3767-4).
NF S31-501:1996 Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane.
NF S10-111-1:2001 Laser and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges.

CH-SNV, Other Mass Spec Equipment

VSM 18644-1964

YU-JUS, Other Mass Spec Equipment

JUS N.K5.055-1982 Low vo/tage control $witehes. Additional reguirements for pilot switches
JUS N.N0.900-1987 Radio-frequency interferences. Household electrical appliances, equipment and other electrical appara- tus. Limit values
JUS IEC 599:1994 Interpretation of the analysis of gases in transformers and other oil-filled electrical equipment in service
JUS N.N6.181-1978 Radiocommunications. Wired distribution systems. Methods of measurements. Television RF signal to noise ratio. Equipment reguired-additional items.
JUS N.A5.706-1980 Basic environmental testing procedures. Test Ab: Cold fornon heat-?issipating components, equipment or other articles with gradual change of temperature
JUS N.A5.705-1980 Basic environmental testing procedures. Test Aa: Cold of non heat-dissipating components, ajuipment or other articles with sudden change of temperature

British Standards Institution (BSI), Other Mass Spec Equipment

PD R210-008-2002 Guide to EMC conformity of apparatus designed for military and other purposes
BS EN 1865:2000 Specifications for stretchers and other patient handling equipment used in road ambulances
BS 5306-0:2011 Fire protection installations and equipment on premises. Guide for selection of installed systems and other fire equipment
BS ISO 3767-1:1998+A2:2012 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Common symbols
BS ISO 3767-1:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Common symbols
BS EN 61000-4-23:2001 Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances
BS 5306-0:1986 Fire extinguishing installations and equipment on premises - Guide for the selection of installed systems and other fire equipment
BS ISO 3767-3:1996 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for powered lawn and garden equipment
BS ISO 3767-3:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Symbols for powered lawn and garden equipment
BS ISO 3767-3:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for powered lawn and garden equipment
BS ISO/IEC 14755:1997 Information technology - Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
BS ISO/IEC 14755:1998 Information technology. Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
BS ISO 6016:2008 Earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components
BS 6911-13:1998 Testing earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components
BS ISO 3767-2:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for agricultural tractors and machinery
BS ISO 3767-2:2009 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Symbols for agricultural tractors and machinery
BS ISO 3767-2:2008 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Symbols for agricultural tractors and machinery
BS EN ISO 11203:1996 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
BS 6100-1.5.1:1999 Glossary of building and civil engineering terms - General and miscellaneous - Operations - Associated plant and equipment - Co-ordination of dimensions - Tolerances and accuracy
BS EN ISO 11200:2010 Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
BS EN ISO 11200:2009 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
BS EN ISO 11200:2014 Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
BS EN ISO 11204:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
BS EN ISO 11202:1996 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ
BS EN ISO 11202:2009 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ
BS ISO 3767-5:1992 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Symbols for manual portable forestry machinery
BS EN ISO 11205:2010 Acoustics. Noise emitted by machinery and equipment. Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
BS ISO 3767-5:1996 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for manual portable forestry machinery
BS EN ISO 11205:2009 Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
BS ISO 3767-5:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for manual portable forestry machines
BS EN ISO 11204:1996 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections
BS EN ISO 11202:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
BS EN 13786:2004 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
BS EN 13786:2004+A1:2008 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
BS EN 13786:2004+A1:2008(2009) Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures

ES-AENOR, Other Mass Spec Equipment

UNE 68-069 Pt.0-1990
UNE 53-522-1991 Rubber test mixes. Preparation, mixing and vulcanizatoin. Equipment and procedures
UNE 1-102 Pt.1-1991

National Sanitation Foundation (NSF), Other Mass Spec Equipment

NSF 50-2011 Equipment for Swimming Pools, Spas, Hot Tubs and Other Recreational Water Facilities
NSF 50 ADD-2011 Equipment for Swimming Pools, Spas, Hot Tubs and Other Recreational Water Facilities

American National Standards Institute （ANSI), Other Mass Spec Equipment

ANSI/NSF 50(i67)-2011 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i71)-2011 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i85)-2012 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i47r3)-2013 Equipment for Swimming Pools, Spas, Hot Tubs and other Recreational Water Facilities
ANSI/NSF 50(i87r1,r2,and r3)-2013 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i88r1)-2013 Equipment for Swimming Pools, Spas, Hot Tubs and other Recreational Water Facilities
ANSI/NSF 50(i72)-2012 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i82)-2012 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i81)-2012 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i84)-2012 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/AWS D14.1/D14.1M:2005 Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment
ANSI/ASA S12.43-1997 Methods for Calculation of Sound Emitted by Machinery and Equipment at Workstations and Other Specified Positions
ANSI/ASTM D2321:2011 Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ANSI/ASA S12.44-1997 Methods for Measurement Calculation of Sound Emitted by Machinery and Equipment at Work Stations and other Specified Positions from Sound Power Levels
ANSI/EIA/ECA 747B:2014 Adhesive Backed punched plastic carrier taping of singulated bare die and other surface mount components for automatic handling of devices generally less than 1.0mm thick

Japanese Industrial Standards Committee (JISC), Other Mass Spec Equipment

JIS C 60364-5-55:2006 Electrical installations of buildings -- Part 5-55: Selection and erection of electrical equipment -- Other equipment
JIS C 60364-5-55:2011 Electrical installations of buildings -- Part 5-55: Selection and erection of electrical equipment -- Other equipment
JIS C 8147-2-11:2005 Lamp controlgear -- Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
JIS B 9946:2011 Ozone treatment apparatus for waste and water in industry and other oxidation uses.Specifications of apparatus and measurement methods for ozone concentration
JIS C 0364-5-551:1999 Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter 55: Other equipment Section 551: Low-voltage generating sets
JIS C 0364-5-559:2002 Electrical installations of buildings -- Part 5: Selection and erection of electrical equipment -- Chapter 55: Other equipment -- Section 559: Luminaires and lighting installations
JIS A 8320:2001 Earth-moving machinery -- Methods of measuring the masses of whole machines, their equipment and components
JIS A 8310-2:2006 Earth-moving machinery -- Symbols for operator controls and other displays -- Part 2: Specific symbols for machines, equipment and accessories
JIS A 8310-2:2019 Earth-moving machinery -- Symbols for operator controls and other displays -- Part 2: Symbols for specific machines, equipment and accessories
JIS C 60068-2-47:2004 Environmental testing -- Part 2-47: Test methods -- Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests
JIS Z 8737-2:2000 Acoustics -- Noise emitted by machinery and equipment -- Measurement of emission sound pressure levels at a work station and at other specified positions -- Survey method in situ

Professional Standard - Agriculture, Other Mass Spec Equipment

农业农村部公告第197号-10-2019 Determination of 160 veterinary drugs and other compounds in blood and urine of livestock and poultry by liquid chromatography-tandem mass spectrometry
农业农村部公告第197号-9-2019 Identification and confirmation of 150 veterinary drugs and other compounds in blood and urine of livestock and poultry by liquid chromatography-high resolution tandem mass spectrometry
水产品质量安全检验手册 8.1.1.0-2005 Chapter 8 Inspection of other harmful substances in aquatic products Section 1 Determination of polychlorinated biphenyls in aquatic products 1. Gas chromatography (GBT 5009.190-2003)
水产品质量安全检验手册 8.1.2.0-2005 Chapter 8 Testing of Other Hazardous Substances in Aquatic Products Section 1 Determination of PCBs in Aquatic Products 2. Gas Chromatography (Test Method)
水产品质量安全检验手册 8.2.2.2-2005 Chapter 8 Inspection of other harmful substances in aquatic products Section 2 Determination of formaldehyde in aquatic products 2. Determination of formaldehyde in aquatic products (NY 5073-2001) (2) Gas chromatography method

Professional Standard - Machinery, Other Mass Spec Equipment

JB 8616-1997 Safety protection of copying machinery (including other office equipment)

PT-IPQ, Other Mass Spec Equipment

NP 2615-1984
NP 2630-1986
NP 2610-1984
NP 2614-1984
NP EN 20594-1-1999 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medicai equipment Part 1: General requirements (ISO 594-1:1986)
NP EN 61048-2000 Auxiliaries for lamps Capacitors for use in tubular fluorescent and other discharge lamp circuits General and safety requirements (IEC 61048:1991, modified + Corrigendum 1992 + Al:1995)

International Electrotechnical Commission (IEC), Other Mass Spec Equipment

IEC 60364-5-55/AMD2:2008 Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment
IEC 60364-5-551:1994 Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Chapter 55: Other equipment - Section 551: Low-voltage generating sets
IEC 60364-5-559:1999 Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Chapter 55: Other equipment - Section 559: Luminaires and lighting installations

Acoustical Society of America (ASA), Other Mass Spec Equipment

ASA S12.43-1997 Methods for Measurement of Sound Emitted by Machinery and Equipment at Workstations and other Specified Positions
ASA S12.44-1997 Methods for Calculation of Sound Emitted by Machinery and Equipment at Workstations and other Specified Positions from Sound Power Level

American Society for Testing and Materials (ASTM), Other Mass Spec Equipment

ASTM A757/A757M-00(2004) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
ASTM A757/A757M-10 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
ASTM F710-98 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
ASTM F710-21 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
ASTM E1008-97 Standard Practice for Installation, Inspection, and Maintenance of Valve Body Pressure Relief Methods for Geothermal and Other High-Temperature Liquid Applications
ASTM D2321-04e1 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2321-04 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2321-05 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2321-11 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2321-09 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2321-00 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM E2119-00 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
ASTM D7001-05 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
ASTM D7001-04 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
ASTM E1008-03 Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications
ASTM E1008-03(2009) Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications
ASTM D5951-96 Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing
ASTM D5951-96(2002) Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing

RO-ASRO, Other Mass Spec Equipment

STAS 10717-1984 CONICAL FITTING 6% FOR SYRINGES, NEEDLES AND OTHER MEDICAL EQUIPMENT Forms and dimensions
STAS 9899-1985 WOODEN CABINET FOR RADIO RECEIVERS, TELEVISION SETS AND OTHER ELECTRONIC APARATUSES

European Committee for Standardization (CEN), Other Mass Spec Equipment

EN 1865:1999 Specifications for Stretchers and Other Patient Handling Equipment Used in Road Ambulances
HD 397 S1-1979 Interpretation of the analysis of gases in transformers and other oil-filled electrical equipment in service
HD 450.11 S1-1985 Hearing aids; part 11: symbols and other markings on hearing aids and related equipment
EN 20594-1:1994 Conical Fittings with 6 Percent (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Part 1: General Requirements Includes Amendment 1: 1994; ISO 594-1: 1986
EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
EN 62133:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes — Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
EN 12918:1999 Water quality - Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis
EN 20594-1:1994/A1:1997 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986); Amendment A1
EN ISO 11203:1995 Acoustics - Noise Emitted by Machinery and Equipment - Determination of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions from the Sound Power Level
EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
EN ISO 11200:2009 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
EN ISO 11202:2010/A1:2021 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment 1 (ISO 11202:2010/Amd 1:2020)
EN ISO 3767-3:1996 Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 3: Symbols for Powered Lawn and Garden Equipment
EN ISO 3767-1:1995 Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 1: Common Symbols (ISO 3767-1 : 1991)
EN 20594-1:1993 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment; part 1: general requirements (ISO 594-1:1986)
EN ISO 3767-1:2000 Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 1: Common Symbols
EN ISO 11200:2014/A1:2020 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)
EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)

American Welding Society (AWS), Other Mass Spec Equipment

AWS D14.1/D14.1M-2005 amd-2017 Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment
AWS D14.1/D14.1M-2005 Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Other Mass Spec Equipment

GB 16895.20-2003 Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter 55: Other equipment Section 551: Low-voltage generating sets
GB/T 17697-2014 Acoustics.Determination of sound power radiated into a duct by fans and other air-moving devices.In-duct method
GB/T 15153.2-2000 Telecontrol equipment and systems Part 2: Operating conditions Section2: Environmental conditions (Climatic,mechanical and other non-electrical influences)
GB/T 15475-1995 Classification of quality assurance for instrumentation and control system and their electrical equipment of nuclear power plants
GB/T 17248.1-2000 Acoustics-Noise emitted by machinery and equipment-Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
GB/T 17248.6-2007 Acoustics.Noise emitted by machinery and equipment.Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity

Standard Association of Australia （SAA）, Other Mass Spec Equipment

AS 1600.1:2004 Medical equipment - Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - General requirements
AS ISO 6016:2020 Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components

Institute of Electrical and Electronics Engineers (IEEE), Other Mass Spec Equipment

IEEE 1205-2014 Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities

CZ-CSN, Other Mass Spec Equipment

CSN 35 9755-1975 Closures and keys for securing distribution and other electric equipment applied in electric and industrial service rooms

Danish Standards Foundation, Other Mass Spec Equipment

DS/ISO 3077:1984 Short link chain for lifting purposes. Grade T (8), calibrated, for chain hoists and other lifting appliances
DS/ISO 594-1:1989 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment. Part 1: General requirements
DS/ISO 3767/1:1983 Tractors, machinery for agriculture and forestry. Powered lawn and garden equipment. Symbols for operator controls and other displays. Part 1: Common symbols

European Committee for Electrotechnical Standardization（CENELEC）, Other Mass Spec Equipment

HD 450.11-1987 Hearing Aids Part 11: Symbols and Other Markings on Hearing Aids and Related Equipment
EN 61010-2-081:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes Safety requirements for electrical equipme
EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes

Professional Standard-Ships, Other Mass Spec Equipment

CB/T 3613-1994 Installation quality requirements for navigation equipment and its accessories

Professional Standard - Post and Telecommunication, Other Mass Spec Equipment

YDN 028-1997 Protection of SDH Optical Cable System and Equipment──Linear multiplex section, self-healing ring and other types of structures
YD/T 907-1997 Regulations for numbers, letters and signs for dialing over telephone set and other equipment accessed to telephone network

Korean Agency for Technology and Standards (KATS), Other Mass Spec Equipment

KS C IEC 60512-9-2003(2008) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 9：Miscellaneous tests
KS B ISO 6016:2017 Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components
KS F ISO 6016:2003 Earth－moving machinery－Methods of measuring the masses of whole machines, their equipment and components
KS C IEC 60870-2-2-2003(2018)
KS B ISO 13695:2015 Optics and photonics — Lasers and laser-related equipment — Test methods for the spectral characteristics of lasers
KS B ISO 13695:2006 Optics and photonics-Lasers and laser-related equipments-Test methods for the spectral characteristics of lasers
KS B ISO 3767-4:2017 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment－Symbols for operator controls and other displays－Part 4：Symbols for forestry machinery

RU-GOST R, Other Mass Spec Equipment

GOST R IEC 61048-2005 Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
GOST R 52459.25-2009 Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 25. Specific requirements for CDMA 1x spread spectrum mobile stations and ancillary equipment

Indonesia Standards, Other Mass Spec Equipment

SNI ISO 12402-10:2011 Personal flotation devices - Part 10: Selection and application of personal flotation devices and other relevant devices.

International Telecommunication Union (ITU), Other Mass Spec Equipment

ITU-T L.30-1996 Markers on Marinized Terrestrial Cables; Series L: Costruction, Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6; 9 pp
ITU-T L.56-2003 Installation of optical fibre cables along railways
ITU-T L.44-2000 Electric Power Supply for Equipment Installed as Outside Plant Study Group 6
ITU-T L.43-2002 Optical fibre cables for buried application
ITU-T L.48-2003 Mini-trench installation technique
ITU-T L.49-2003 Micro-trench installation technique Study Group 6
ITU-T L.47-2000 Access Facilities Using Hybrid Fibre/Copper Networks Series L: Construction Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6
ITU-T L.31-1996 Optical Fibre Attenuators Study Group 6; 9 pp
ITU-T L.60-2004 Construction of Optical/Metallic Hybrid Cables Series L: Construction Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6
ITU-T L.26-2002 Optical Fibre Cables for Aerial Application Study Group 6
ITU-T L.52-2003 Deployment of Passive Optical Networks (PON)
ITU-T L.57-2003 Air-assisted installation of optical fibre cables Study Group 6
ITU-T L.63-2004 Safety practice for outdoor installations Study Group 6
ITU-T L.45-2000 Minimizing the effect on the environment from the outside plant in telecommunication networks Study Group 6
ITU-T L.36-1998 Single Mode Fibre Optic Connectors - Series L: Construction, Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6; 16 pp
ITU-T L.1000-2011 (Pre-Published) Universal power adapter and charger solution for mobile terminals and other hand-held ICT devices
ITU-T L.61-2004 Optical fibre cable installation by floating technique SERIES L: CONSTRUCTION INSTALLATION AND PROTECTION OF CABLES AND OTHER ELEMENTS OF OUTSIDE PLANT Study Group 6
ITU-T L.1000-2010 Universal power adapter and charger solution for mobile terminals and other ICT devices
ITU-T G.796 CORR 1 FRENCH-1998 Characteristics of a 64 kbit/s Cross-Connect Equipment with 2048 kbit/s Access Ports - Corrigendum 1 - Series G: Transmission Systems and Media Digital Systems and Networks - Digital Transmission Systems - Terminals Equipments - Other Terminal Equipment S
ITU-T G.796 CORR 1 SPANISH-1998 Characteristics of a 64 kbit/s Cross-Connect Equipment with 2048 kbit/s Access Ports - Corrigendum 1 - Series G: Transmission Systems and Media Digital Systems and Networks - Digital Transmission Systems - Terminals Equipments - Other Terminal Equipment S
ITU-T L.28-2002 External Additional Protection for Marinized Terrestrial Cables Study Group 6
ITU-T L.35-1998 Installation of Optical Fibre Cables in the Access Network - Series L: Construction Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6; 10 pp
ITU-T L.41-2000 Maintenance wavelength on fibres carrying signals Study Group 6
ITU-T L.53-2003 Optical fibre maintenance criteria for access networks Study Group 6
ITU-T L.58-2004 Optical fibre cables: Special needs for access network Study Group 6
ITU-T L.27-1996 Method for Estimating the Concentration of Hydrogen in Optical Fibre Cables Study Group 6; 19 pp
ITU-T L.29-2002 As-Laid Report and Maintenance/Repair Log for Marinized Terrestrial Cable Installation Study Group 6
ITU-T L.39-2000 Investigation of the Soil Before Using Trenchless Techniques Series L: Construction Installation and Protection of Cables and Other Elements Of Outside Plant Study Group 6
ITU-T L.42-2003 Extending optical fibre solutions into the access network Study Group 6
ITU-T L.55-2003 Digital database for marine cables and pipelines Study Group 6
ITU-T Y.1451.1 SPANISH-2004 Functionality and interface specifications for GSTN transport network equipment for interconnecting GSTN and IP networks
ITU-T L.33-1998 Periodic Control of Fire Extinction Devices in Telecommunication Buildings - Series L: Construction Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6; 11 pp
ITU-T L.38-1999 Use of Trenchless Techniques for the Construction of Underground Infrastructures for Telecommunication Cable Installation - Series L: Construction Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6; 42 PP
ITU-T L.34-1998 Installation of Optical Fibre Ground Wire (OPGW) Cable - Series L: Construction Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6; 9 pp
ITU-T G.8261 AMD 1-2010 Timing and synchronization aspects in packet networks Amendment 1: Network jitter limits for the synchronous Ethernet equipment clock interface and other clarifications Study Group 15
ITU-T L.32-1998 Protection Devices for Through-Cable Penetrations of Fire-Sector Partitions Study Group 6; 14 pp
ITU-T L.46-2000 Protection of Telecommunication Cables and Plant from Biological Attack Study Group 6
ITU-T L.50-2003 Requirements for passive optical nodes: optical distribution frames for central office environments Study Group 6
ITU-T L.62-2004 Practical aspects of unbundling services by multiple operators in copper access networks Study Group 6
ITU-T G.799.1 FRENCH-2004 Functionality and Interface Specifications for GSTN Transport Network Equipment for Interconnecting GSTN and IP Networks SERIES G: TRANSMISSION SYSTEMS AND MEDIA DIGITAL SYSTEMS AND NETWORKS Digital terminal equipments Other terminal equipment Also Listed
ITU-T G.799.1 SPANISH-2004 Functionality and Interface Specifications for GSTN Transport Network Equipment for Interconnecting GSTN and IP Networks SERIES G: TRANSMISSION SYSTEMS AND MEDIA DIGITAL SYSTEMS AND NETWORKS Digital terminal equipments Other terminal equipment Also Listed
ITU-T Y.1451.1 FRENCH-2004 Functionality and Interface Specifications for GSTN Transport Network Equipment for Interconnecting GSTN and IP Networks SERIES G: TRANSMISSION SYSTEMS AND MEDIA DIGITAL SYSTEMS AND NETWORKS Digital terminal equipments Other terminal equipment Also Listed

SE-SIS, Other Mass Spec Equipment

SIS SS 3163-1988 Link chains - Short link chains grade 8 - Calibrated, for chain hoists and other lifting appliances- Requirements and testing
SIS SS 3162-1988 Link chains - Short link chains grade 8 - Non-calibrated, for chain slings and other general lifting purposes - Requirements and testing

CEN - European Committee for Standardization, Other Mass Spec Equipment

EN ISO 11202:2009 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ
EN ISO 11200:1995 CORR Acoustics - Noise Emitted by Machinery and Equipment - Guidelines for the Use of Basic Standards for the Determination of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions (Incorporating Corrigendum April 1997)

AENOR, Other Mass Spec Equipment

UNE-ISO 6016:2009 Earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components.

TH-TISI, Other Mass Spec Equipment

TIS 1387.1-1996 Conical fittings with a 6% (luer) taper for syringes, needles and certain other medical equipment.part 1: general requirements
TIS 1387.2-1996 Conical fittings with a 6% (luer) taper for syringes, needles and certain other medical equipment.part 2: lock fittings

BR-ABNT, Other Mass Spec Equipment

ABNT NBR ISO 3767-3:2020 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays Part 3: Symbols for powered lawn and garden equipment
ABNT NBR ISO 3767-1:2020 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays Part 1: Common symbols
ABNT NBR ISO 3767-4:2020 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays Part 4: Symbols for forestry machinery
ABNT NBR ISO 3767-5:2020 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays Part 5: Symbols for manual portable forestry machines

KR-KS, Other Mass Spec Equipment

KS B ISO 6016-2017 Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components
KS B ISO 3767-4-2017 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment－Symbols for operator controls and other displays－Part 4：Symbols for forestry machinery

Professional Standard - Electron, Other Mass Spec Equipment

SJ 2713-1986 Quality inspection procdures for small-size radio telephones and their assessories for commercial use
SJ/Z 9001.41-1987 Basic environmental testing procedures--Part 2: Tests--Mounting of components equipment and other articles for dynamic tests including shock(Ea),bump(Eb),vibration(Fc and Fd) and s

ZA-SANS, Other Mass Spec Equipment

SANS 61010-2-081:2005 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
SANS 11203:1995 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
SANS 11204:1995 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections
SANS 300339:1998 Electromagnetic compatibility and Radio spectrum Matters (ERM) - General ElectroMagnetic Compatibility (EMC) for radio communications equipment

ETSI - European Telecommunications Standards Institute, Other Mass Spec Equipment

GSM 02.16-1992 European Digital Cellular Telecommunication System (Phase 1); International MS Equipment Identities

National Association of Corrosion Engineers (NACE), Other Mass Spec Equipment

NACE RP0170-2004 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment Item No:21002

BE-NBN, Other Mass Spec Equipment

NBN D 13-001-1979

Military Standard of the People's Republic of China-General Armament Department, Other Mass Spec Equipment

GJB 440.1-1988 Classification of environmental parameters of ship equipment and their severity levels: climate, biological, chemically active substances and mechanically active substances

European Telecommunications Standards Institute (ETSI), Other Mass Spec Equipment

ETSI ETS 300 717-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) for Analogue Cellular Radio Communications Equipment; Mobile and Portable Equipment
ETSI ETS 300 741-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Wide-Area Paging Equipment

SAE - SAE International, Other Mass Spec Equipment

SAE J/ISO 6016:2003 Earth-moving machinery Methods of measuring the masses of whole machines@ their equipment and components (This document is no longer maintained by SAE)

Society of Automotive Engineers (SAE), Other Mass Spec Equipment

SAE J/ISO 6016-2003 Earth-moving machinery Methods of measuring the masses of whole machines, their equipment and components Identical to ISO 6016:1998; Superseding SAE J1097