ZH
RU
ES

Injection valve during

Injection valve during, Total:81 items.

In the international standard classification, Injection valve during involves: Valves, Footwear, Protection of and in buildings, Acoustics and acoustic measurements, Construction materials, Air quality, Space systems and operations, Special purpose vehicles, Quality, Protection against fire, Applications of information technology, Petroleum products in general, Metrology and measurement in general.

United States Navy, Injection valve during

NAVY QPL-81940-12-2002 VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE II SYSTEMS
NAVY MIL-V-81940/2-1983 VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE II SYSTEMS NPTF FITTING
NAVY MIL-V-81940/3-1983 VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE II SYSTEMS 37 DEG. FLARE FITTING

SSPC - The Society for Protective Coatings, Injection valve during

TU 7-2000 Conducting Ambient Air@ Soil@ and Water Sampling During Surface Preparation and Paint Disturbance Activities

Association Francaise de Normalisation, Injection valve during

NF T73-010*NF ISO 8212:1986 Soaps and detergents. Techniques of sampling during manufacture.
NF EN 14912:2022 Équipements pour GPL et leurs accessoires - Contrôle et entretien des robinets de bouteilles de GPL lors du contrôle périodique des bouteilles
NF S97-555:2007 Informatique de santé - Règles permettant un contrôle de cohérence entre différents identifiants des spécialités pharmaceutiques et/ou leurs présentations lors des échanges d'informations entre systèmes différents
NF X43-255*NF ISO 8761:1990 Work-place air. Determination of mass concentration nitrogen dioxide. Method using detector tubes for short-term sampling with direct indication.

RU-GOST R, Injection valve during

GOST ISO 17709-2013 Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces
GOST R ISO 15859-7-2010 Space systems. Fluid characteristics, sampling and methods of analysis. Part 7. Hydrazine propellant
GOST R ISO 15859-8-2010 Space systems. Fluid characteristics, sampling and methods of analysis. Part 8. Kerosine propellant
GOST R ISO 15859-5-2010 Space systems. Fluid characteristics, sampling and methods of analysis. Part 5. Nitrogen tetroxide propellants
GOST 8.579-2002 State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing

VN-TCVN, Injection valve during

TCVN 5491-1991 Soaps and detergents.Techniques of sampling during manufacture

American Society for Testing and Materials (ASTM), Injection valve during

ASTM E795-23 Standard Practices for Mounting Test Specimens During Sound Absorption Tests
ASTM E795-05(2012) Standard Practices for Mounting Test Specimens During Sound Absorption Tests
ASTM D3617/D3617M-16 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
ASTM D3617/D3617M-17 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
ASTM F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D6708-05 Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-06 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-08 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

The Society for Protective Coatings (SSPC), Injection valve during

SSPC TU 7-2000 Conducting Ambient Air, Soil, and Water Sampling During Surface Preparation and Paint Disturbance Activities

National Fire Protection Association (NFPA), Injection valve during

NFPA 350-2016 Guide for Safe Confined Space Entry and Work (Effective Date: 12/04/2015)

GOSTR, Injection valve during

GOST R 58263-2018 Rehabilitation of desabled persons. Services on accompaniment during promotion of employment of persons with disabilities
GOST 8.579-2019 State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Injection valve during

GB/T 16043-1995 Workplace air--Determination of benzene--Direct injection gas chromatographic method
GB/T 16046-1995 Workplace air--Determination of toluene--Direct injection gas chromatographic method
GB/T 16065-1995 Workplace air--Determination of butyl alcohol--Direct injection gas chromatographic method
GB/T 16071-1995 Workplace air--Determination of ethyl ether--Direct injection gas chromatographic method
GB/T 16095-1995 Workplace air--Determination of acetonitrile--Direct injection gas chromatographic method
GB/T 16060-1995 Workplace air--Determination of butanone--Direct injection gas chromatographic method
GB/T 16058-1995 Workplace air--Determination of acetone--Direct injection gas chromatographic method
GB/T 16062-1995 Workplace air--Determination of methyl alcohol--Direct injection gas chromatographic method
GB/T 16064-1995 Workplace air--Determination of propyl alcohol--Direct injection gas chromatographic method
GB/T 16040-1995 Workplace air--Determination of butadiene--Direct injection gas chromatographic method
GB/T 16041-1995 Workplace air--Determination of cyclohexane--Direct injection gas chromatographic method
GB/T 16052-1995 Workplace air--Determination of styrene--Direct injection gas chromatographic method
GB/T 16078-1995 Workplace air--Determination of methyl chloride--Direct injection gas chromatographic method
GB/T 16084-1995 Workplace air--Determination of methyl bromide--Direct injection gas chromatographic method
GB/T 16049-1995 Workplace air--Determination of xylene--Direct injection gas chromatographic method
GB/T 16090-1995 Workplace air--Determination of allyl chloride--Direct injection gas chromatographic method
GB/T 16098-1995 Workplace air--Determination of acrylonitrile--Direct injection gas chromatographic method
GB/T 16067-1995 Workplace air--Determination of ethyl acetate--Direct injection gas chromatographic method
GB/T 16066-1995 Workplace air--Determination of methyl acetate--Direct injection gas chromatographic method
GB/T 16074-1995 Workplace air--Determination of ethylene oxide--Direct injection gas chromatographic method
GB/T 16094-1995 Workplace air--Determination of tetrafluoroethylene--Direct injection gas chromatographic method
GB/T 16069-1995 Workplace air--Determination of butyl acetate--Direct injection gas chromatographic method
GB/T 16079-1995 Workplace air--Determination of methylene chloride--Direct injection gas chromatographic method
GB/T 16080-1995 Workplace air--Determination of trichloromethane--Direct injection gas chromatographic method
GB/T 16038-1995 Workplace air--Determination of solvent naphthas--Direct injection gas chromatographic method
GB/T 16091-1995 Workplace air--Determination of chloroprene--Direct injection gas chromatographic method
GB/T 16068-1995 Workplace air--Determination of propyl acetate--Direct injection gas chromatographic method
GB/T 16087-1995 Workplace air--Determination of vinyl chloride--Direct injection gas chromatographic method(DNP)
GB/T 16070-1995 Workplace air--Determination of amyl acetate--Direct injection gas chromatographic method
GB/T 16082-1995 Workplace air--Determination of carbon tetrachloride--Direct injection gas chromatographic method
GB/T 16076-1995 Workplace air--Determination of epichlorohydrin--Direct injection gas chromatographic method
GB/T 16088-1995 Workplace air--Determination of vinyl chloride--Direct injection gas chromatographic method (PEG 6000)
GB/T 16085-1995 Workplace air--Determination of dichloroethane--Direct injection gas chromatographic method(Apiezon L)
GB/T 16086-1995 Workplace air--Determination of dichloroethane--Direct injection gas chromatographic method(PEG 20M)

Society of Motion Picture and Television Engineers (SMPTE), Injection valve during

SMPTE ST 309-2012 Transmission of Date and Time Zone Information in Binary Groups of Time and Control Code

GB-REG, Injection valve during

REG NASA-LLIS-0217-1992 Lessons Learned - Galileo Retro Propulsion Module Oxidizer Leak During Loading

Professional Standard - Hygiene , Injection valve during

WS/T 71-1996 Workplace air.Determination of propenol.Direct injection gas chromatographic method

SE-SIS, Injection valve during

SIS SS 11 03 21-1983 Impact test - Charpy impact testing machines - Indirect verification using unnotched test pieces

Society of Automotive Engineers (SAE), Injection valve during

SAE J2473-2014 Self-Propelled Sweepers and Scrubbers - Maximum Gradient Rating During Hopper Discharge

Japanese Industrial Standards Committee (JISC), Injection valve during

JIS Z 9003:1979 Single sampling inspection plans having desired operation characteristics by variables (standard deviation known)
JIS Z 9004:1983 Single sampling inspection plans having desired operating characteristics by variables (standard deviation unknown and single limit specified)

Institute of Electrical and Electronics Engineers (IEEE), Injection valve during

ST 309:2012 ST 309:2012 - SMPTE Standard - Transmission of Date and Time Zone Information in Binary Groups of Time and Control Code
SMPTE ST 309:2012 ST 309:2012 - SMPTE Standard - Transmission of Date and Time Zone Information in Binary Groups of Time and Control Code
SMPTE ST 309:1999 ST 309:1999 - SMPTE Standard - For Television — Transmission of Date and Time Zone Information in Binary Groups of Time and Control Code

International Organization for Standardization (ISO), Injection valve during

ISO 15859-5:2004 Space systems — Fluid characteristics, sampling and test methods — Part 5: Nitrogen tetroxide propellants
ISO 16200-2:2000 Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 2: Diffusive sampling method
ISO 16405:2015 Room corner and open calorimeter - Guidance on sampling and measurement of effluent gas production using FTIR technique

ESDU - Engineering Sciences Data Unit, Injection valve during

ESDU 74040 C-2007 Pressure loss during crossflow of fluids with heat transfer over plain tube banks without baffles.
ESDU 74040 B-1980 PRESSURE LOSS DURING CROSSFLOW OF FLUIDS WITH HEAT TRANSFER OVER PLAIN TUBE BANKS WITHOUT BAFFLES

API - American Petroleum Institute, Injection valve during

API DR 218-1997 Pilot Study in Los Angeles to Measure Personal Ozone Exposures During Scripted Activities (Appendices)

British Standards Institution (BSI), Injection valve during

BS ISO 16405:2015 Room corner and open calorimeter. Guidance on sampling and measurement of effluent gas production using FTIR technique
PD ISO/TR 19024:2016 Evaluation of CPB devices relative to their capabilities of reducing the transmission of gaseous microemboli (GME) to a patient during cardiopulmonary bypass

Professional Standard - Agriculture, Injection valve during

空气和废气监测分析方法 7.3.4-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 4 Sampling Time Sampling Period and Sampling Requirements

Korean Agency for Technology and Standards (KATS), Injection valve during

KS I ISO 16200-2:2006 Workplace air quality－Sampling and analysis of volatile organiccompounds by solvent desorption/gas chromatography－Part 2：Diffusive sampling method

German Institute for Standardization, Injection valve during

DIN EN ISO 15011-1:2010-03 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009); German version EN ISO 15011-1:200...