ZH
RU
ES

mass fraction volume fraction density

mass fraction volume fraction density, Total:267 items.

In the international standard classification, mass fraction volume fraction density involves: Soil quality. Pedology, Metrology and measurement in general, Products of the chemical industry, Fuels, Paints and varnishes, Fruits. Vegetables, Nuclear energy engineering, Construction materials, Buildings, Conducting materials, Cereals, pulses and derived products, Industrial automation systems, Water quality, Beverages, Quality, Applications of information technology, Magnetic materials, Burners. Boilers, Air quality, Particle size analysis. Sieving, Software development and system documentation, Non-ferrous metals, Cellular materials, Measurement of volume, mass, density, viscosity, Electricity. Magnetism. Electrical and magnetic measurements, Food products in general, Prepackaged and prepared foods, Company organization and management, Cinematography, Geology. Meteorology. Hydrology, Telecommunication systems, Electrical equipment for working in special conditions, Paint ingredients, Petroleum products in general, Analytical chemistry, Road engineering, Spices and condiments. Food additives, Fertilizers, Plastics, Railway rolling stock, Microbiology, Agricultural machines, implements and equipment, Raw materials for rubber and plastics, Fluid power systems, Alarm and warning systems, Information technology (IT) in general, Semiconductor devices, Environmental protection, Aids for disabled or handicapped persons, Piezoelectric and dielectric devices.

Korean Agency for Technology and Standards (KATS), mass fraction volume fraction density

KS I ISO 16586:2009 Soil quality-Determination of soil water content as a volume fraction on the basis of known dry bulk density-Gravimetric method
KS I ISO 15970-2010(2021) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor
KS A ISO 9278-2014(2019) Nuclear energy — Uranium dioxide pellets — Determination of density and volume fraction of open and closed porosity
KS I ISO 11461:2021 Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method
KS M ISO 23811:2012 Paints and varnishes-Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
KS X ISO TS 8000-130-2013(2018) Data quality－Part 130：Master data：Exchange of characteristic data：Accuracy
KS C IEC 60404-13-2002(2017) Magnetic materials－Part 13：Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
KS C IEC 60404-13-2002(2022) Magnetic materials－Part 13：Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
KS I ISO 7708-2010(2016) Air quality－Particle size fraction definitions for health-related sampling
KS I 2004-2005(2010) Air quality－Particle size fraction definitions for health-related sampling
KS I ISO 7708:2021 Air quality — Particle size fraction definitions for health-related sampling
KS B ISO 15212-2:2006 Oscillation-type density meters－Part 2：Process instruments for homogeneous liquids
KS M ISO 3233-2002(2012) Paints and varnishes－Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
KS A ISO 26431-1-2012(2017) Digital cinema(D-cinema) quality－Part 1：Screen luminance level, chromaticity and uniformity
KS X ISO 8000-62:2021 Data quality — Part 62: Data quality management: Organizational process maturity assessment: Application of standards relating to process assessment
KS M ISO 21687:2011 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
KS M ISO 21687:2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS A ISO 26431-1:2012 Digital cinema(D-cinema) quality－Part 1：Screen luminance level, chromaticity and uniformity
KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS A ISO 26431-1-2012(2022) Digital cinema(D-cinema) quality－Part 1：Screen luminance level, chromaticity and uniformity
KS M ISO 3233-3:2016 Paints and varnishes ━ Determination of the percentage volume of non-volatile matter ━ Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of
KS M ISO 3233-3:2021 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with KS M ISO
KS M 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS M ISO 1133-2:2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS I ISO 10705-3:2015 Water quality — Detection and enumeration of bacteriophages — Part 3: Validation of methods for concentration of bacteriophages from water
KS I ISO 10705-3:2010 Water quality-Detection and enumeration of bacteriophages-Part 3:Validation of methods for concentration of bacteriophages from water
KS I ISO 10705-3:2021 Water quality — Detection and enumeration of bacteriophages —Part 3: Validation of methods for concentration of bacteriophages from water
KS C IEC 61779-5-2003(2018)
KS P ISO 17190-9:2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders –Part 9: Test method for gravimetric determination of flow rate and bulk density
KS C IEC 60444-7-2016(2021) Measurement of quartz crystal unit parameters ― Part 7: Measurement of activity and frequency dips of quartz crystal units

International Organization for Standardization (ISO), mass fraction volume fraction density

ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
ISO 16586:2003/Cor 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method; Technical Corrigendum 1
ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
ISO 7971-1:2003 Cereals - Determination of bulk density, called "mass per hectolitre" - Part 1: Reference method
ISO 7971-2:1995 Cereals - Determination of bulk density, called "mass per hectolitre" - Part 2: Routine method
ISO 8000-130:2016 Data quality - Part 130: Master data: Exchange of characteristic data: Accuracy
ISO/TS 8000-130:2009 Data quality - Part 130: Master data: Exchange of characteristic data: Accuracy
ISO/TR 7871:1997 Culmulative sum charts - Guidance on quality control and data analysis using CUSUM techniques
ISO 7971-3:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 3: Routine method
ISO 15212-2:2002 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids
ISO 8000-64:2022 Data quality — Part 64: Data quality management: Organizational process maturity assessment: Application of the Test Process Improvement method
ISO 8000-62:2018 Data quality - Part 62: Data quality management: Organizational process maturity assessment: Application of standards relating to process assessment
ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
ISO 26431-1:2008 Digital cinema (D-cinema) quality - Part 1: Screen luminance level, chromaticity and uniformity
ISO 787-11:1981 General methods of test for pigments and extenders; Part 11 : Determination of tamped volume and apparent density after tamping
ISO 10705-3:2003 Water quality - Detection and enumeration of bacteriophages - Part 3: Validation of methods for concentration of bacteriophages from water
ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 15212-2:2002/cor 1:2008 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids; Technical Corrigendum 1
ISO 17190-9:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 9: Test method for gravimetric determination of flow rate and bulk density

German Institute for Standardization, mass fraction volume fraction density

DIN ISO 16586:2012 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
DIN 1871:1999 Gaseous fuels and other gases - Density and other volumetric quantities
DIN EN ISO 15970:2014-09 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008); German version EN ISO 15970:2014
DIN 19683-13:2007-07 Soil quality - Physical laboratory tests - Part 13: Determination of soil volume percentage, total pore volume and pore number of mineral soils
DIN EN ISO 11461:2014-07 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001); German version EN ISO 11461:2014
DIN ISO 16586:2012-05 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
DIN 277-3:2005 Areas and volumes of building - Part 3: Quantities and reference units
DIN EN IEC 60404-13:2020-06 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (IEC 60404-13:2018); German version EN IEC 60404-13:2018 / Note: DIN EN 60404-13 (2008-05) remains valid alongside this...
DIN EN ISO 7971-3:2020-02 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019); German version EN ISO 7971-3:2019
DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN EN ISO 7971-2:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009); German version EN ISO 7971-2:2009
DIN EN 16966:2019 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
DIN ISO 16000-37:2019-05 Indoor air - Part 37: Measurement of PM<(Index)2,5> mass concentration (ISO 16000-37:2019)
DIN EN 16966:2019-01 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration; German version EN 16966:2018
DIN EN ISO 3233-3:2015-09 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density...
DIN EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
DIN EN ISO 7971-3:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009); German version EN ISO 7971-3:2009
DIN EN ISO 7971-1:2010-01 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009); German version EN ISO 7971-1:2009
DIN EN 14187-4:2003 Cold applied joint sealants - Part 4: Test methods for the determination of the change in mass and volume after immersion in test fuel; German version EN 14187-4:2003
DIN 54385:2016 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
DIN 54385:2016-08 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
DIN 52451-1:2007 Testing of sealing materials for buildings - Part 1: Determination of change in mass and volume of self-levelling joint sealants
DIN EN 16186-1/A1:2017 Railway applications - Driver's cab - Part 1: Anthropometric data and visibility; German and English version EN 16186-1:2014/prA1:2017
DIN EN 16186-1:2019-04 Railway applications - Driver's cab - Part 1: Anthropometric data and visibility; German version EN 16186-1:2014+A1:2018
DIN 52451-1:2015 Testing of sealing in building construction - Part 1: Determination of change in mass and volume of self-levelling sealants after treatment at elevated temperature
DIN EN 14187-4:2017-07 Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals; German version EN 14187-4:2017
DIN EN ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009); English version of D
DIN EN 13040:2008-01 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density; German version EN 13040:2007

Danish Standards Foundation, mass fraction volume fraction density

DS/ISO 16586/Corr. 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
DS/ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
DS/ISO 11461:2003 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
DS/EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method
DS/EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method
DS/EN 60404-13:2008 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
DS/EN ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
DS/EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
DS/EN 14187-4:2003 Cold applied joint sealants - Part 4: Test method for the determination of the change in mass and volume after immersion in test fuel
DS/EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
DS/ES 59008-4-1:2001 Data requirements for semiconductor die - Part 4-1: Specific requirements and recommendations - Test and quality

Association Francaise de Normalisation, mass fraction volume fraction density

NF X31-433*NF ISO 16586:2003 Sol quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
NF EN ISO 15970:2014 Gaz naturel - Mesurage des caractéristiques - Caractéristiques volumétriques : masse volumique, pression, température et facteur de compression
NF EN ISO 11461:2014 Qualité du sol - Détermination de la teneur en eau du sol en fraction volumique, à l'aide de carottiers - Méthode gravimétrique
NF ISO 9278:2009 Énergie nucléaire - Pastilles de dioxyde d'uranium - Détermination de la masse volumique et de la fraction volumique de pores ouverts et fermés
NF EN ISO 1183-2:2019 Plastiques - Méthodes de détermination de la masse volumique des plastiques non alvéolaires - Partie 2 : méthode de la colonne à gradient de masse volumique
NF V03-719-1*NF EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1 : reference method.
NF EN 14617-1:2013 Pierre agglomérée - Méthodes d'essai - Partie 1 : détermination de la masse volumique apparente et du coefficient d'absorption d'eau
NF EN ISO 787-11:1995 Méthodes générales d'essai des pigments et matières de charge - Partie 11 : détermination du volume massique apparent et de la masse volumique apparente après tassement.
NF C28-901-13*NF EN IEC 60404-13:2018 Magnetic materials - Part 13 : methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
NF EN ISO 1133-1:2022 Plastiques - Détermination de l'indice de fluidité à chaud des thermoplastiques, en masse (MFR) et en volume (MVR) - Partie 1 : méthode normale
NF X43-602*NF EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
NF EN ISO 1133-2:2012 Plastiques - Détermination de l'indice de fluidité à chaud des thermoplastiques, en masse (MFR) et en volume (MVR) - Partie 2 : méthode pour les matériaux sensibles à l'historique temps-température et/ou à l'humidité
NF B35-212-2*NF EN ISO 15212-2:2002 Oscillation-type density meters - Part 2 : process instruments for homogeneous liquids
NF T30-141-3*NF EN ISO 3233-3:2015 Paints and varnishes - Determination of percentage volume of non-volatile matter - Part 3 : Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of th
NF V03-719-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2 : method of traceability for measuring instruments through reference to the international standard instrument.
NF X11-601:1979 Sieving and granulometry. Determination of the area per unit of mass or volume of powders by permeametry. Lea and nurse method.
NF P98-897-4:2003 Cold applied joint sealants - Part 4 : test method for the determination of the change in mass and volume after immersion in test fuel.
NF EN ISO 3233-2:2019 Peintures et vernis - Détermination du pourcentage en volume de matière non volatile - Partie 2 : méthode utilisant la teneur en matière non volatile déterminée conformément à l'ISO 3251 et la masse volumique du feuil sec déterminée par le p...
NF F13-814-1:2015 Railway applications - Driver's cab - Part 1 : anthropometric data and visibility
NF F13-814-1/IN1*NF EN 16186-1/IN1:2018 Railway applications - Driver's cab - Part 1 : anthropometric data and visibility
NF F13-814-1*NF EN 16186-1+A1:2018 Railway applications - Driver's cab - Part 1 : anthropometric data and visibility
NF EN 16186-1+A1:2018 Applications ferroviaires - Cabine de conduite - Partie 1 : données anthropométriques et visibilité
NF EN 16186-1/IN1:2018 Applications ferroviaires - Cabine de conduite - Partie 1 : données anthropométriques et visibilité
NF P98-897-4*NF EN 14187-4:2017 Cold applied joint sealants - Test methods - Part 4 : determination of the change in mass and volume after immersion in test fuels and liquid chemicals
NF EN 14187-4:2017 Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 4 : détermination de la variation de masse et de volume après immersion dans des carburants d'essai et des produits chimiques liquides
FD T90-465-2:2019 Water quality - Protocol for the estimation of the uncertainty of measurement associated with an analysis result for microbiological enumeration methods - Part 2 : technical enumeration
NF T30-141-2*NF EN ISO 3233-2:2019 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2 : method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Ar

RU-GOST R, mass fraction volume fraction density

GOST R 8.599-2003 State system for ensuring the uniformity of measurements. Density and volume of oil. The tables of factots for recalculation of density and mass
GOST R 53764-2009 Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
GOST 8756.10-2015 Fruit and vegetable products. Methods for determination of volume and mass fraction of the pulp
GOST ISO 7971-3-2021 Cereals. Determination of bulk density, called mass per hectolitre. Part 3. Routine method
GOST ISO 7971-3-2013 Determination of bulk density, called mass per hektolitre. Part 3. Routine method
GOST 8756.1-2017 Fruit, vegetable and mushroom products. Methods for determination of organoleptic characteristics, components fraction of total mass and net mass or volume
GOST R 51822-2001 Wines and wine materials. Gas-chromatographic method for determination of volume fraction of ethanol and mass concentration of acetic and propionic acids
GOST R 54525-2011 Data quality. Part 130. Master data. Exchange of characteristic data. Accuracy
GOST R 54525-2011(2019) Data quality. Part 130. Master data. Exchange of characteristic data. Accuracy
GOST R 57061-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma mass spectrometry method
GOST R ISO 21687-2014 Carbonaceous materials for the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
GOST 15113.1-1977 Food concentrates. Methods for determination of packing quality, net and volume weight, separate components mass fraction, particle size of certain types of product and milling grade
GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method
GOST R 54730-2011 Food common salt. Measurement (determination) of potassium-ion mass fraction by flame-photometric method
GOST 19920.5-1974 Stereoregular butadiene synthetic rubbers. Method for determination of copper and iron content
GOST R 52140-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 5. Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas
GOST R 59667-2021 Atmospheric air quality. Methods for determining the fractional composition of dust by optical method. Calculation of suspended particle concentrations PM2.5, PM10 in atmospheric air based on fractional composition
GOST R EN 13528-1-2010 Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Part 1. General requirements

British Standards Institution (BSI), mass fraction volume fraction density

BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
BS EN ISO 11461:2014 Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS EN 16966:2018 Workplace exposure. Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates. Metrics to be used such as number concentration, surface area concentration and mass concentration
BS EN ISO 15212-2:2002 Oscillation-type density meters — Part 2: Process instruments for homogenous liquids
BS ISO 8000-64:2022 Data quality - Part 64: Data quality management: Organizational process maturity assessment: Application of the Test Process Improvement method
BS ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
BS EN ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)
BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
17/30354695 DC BS ISO 8000-62. Data quality. Part 62. Data quality management: Organizational process maturity assessment: Application of the ISO/IEC 330xx family of standards
21/30420158 DC BS ISO 8000-64. Data quality. Part 64. Data quality management: Organizational process maturity assessment: Application of the Test Process Improvement method
BS 3900-A10:1998 Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating
20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
BS EN 190100:1993 Harmonized system of quality assessment for electronic components: sectional specification: digital monolithic integrated circuits
BS ISO 22415:2019 Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, mass fraction volume fraction density

GB/T 9272-2007 Paints and varnishes.Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
GB/Z 4887-2006 Cumulative Sum charts. Guidance on quality control and data analysis using CUSUM techniques
GB/T 13477.19-2002 Test method for building sealants Part 19: Determination of change in mass and volume
GB/T 42381.62-2023 Data Quality Part 62: Data Quality Management: Organizational Process Maturity Assessment: Application of Process Assessment Related Criteria

YU-JUS, mass fraction volume fraction density

JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content

VN-TCVN, mass fraction volume fraction density

TCVN 4996-1-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 1: Reference method
TCVN 4996-3-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 3: Routine method
TCVN 4996-2-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

API - American Petroleum Institute, mass fraction volume fraction density

API MPMS 11.4.1 ERTA-2011 Manual of Petroleum Measurement Standards Chapter 11—Physical Properties Data Section 4—Properties of Reference Materials Part 1—Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers (First Edition)
API MPMS 11.3.3-2011 Manual of Petroleum Measurement Standards Chapter 11.3.3 Miscellaneous Hydrocarbon Product Properties - Ethanol Density and Volume Correction Factors (First Edition)
API MPMS 11.4.1-2003 Measurement StandardsChapter 11Physical PropertiesData Section 4Properties of Reference Materials Part 1Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers (First Edition)
API MPMS 11.5.2-2009 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 2 - Conversions for Relative Density (60/60 °F) (First Edition)
API MPMS 11.5.3-2009 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 3 - Conversions for Absolute Density at 15 °C (First Edition)
API MPMS 11.4.1-2018 Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 4-Properties of Reference Materials Part 1-Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers (SECOND EDITION)
API MPMS 11.3.4-2019 Manual of Petroleum Measurement Standards Chapter 11.3.4 Miscellaneous Hydrocarbon Product Properties— Denatured Ethanol and Gasoline Component Blend Densities and Volume Correction Factors (FIRST EDITION)
API MPMS 11.5.1-2009 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 1 - Conversions of API Gravity at 60 °F (First Edition)
API MPMS 12.2.5 ERTA-2009 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 5 - Calculation of Base Prover Volume by Ma
API MPMS 12.2.5-2001 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 5 - Calculation of Base Prover Volume by Ma
API MPMS 12.2.4 ERTA-2009 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
API MPMS 12.2.4-1997 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
API MPMS 11.5-2009 Density/Weight/Volume Intraconversion (First Edition; Includes Part 1 Errata: September 2011@ Updated@ September 2013; Part 2-Conversions For Relative Density (60/60 F); Part 3-Conversions for Absolute Density at 15 C; Includes Access to Additional Conten

AENOR, mass fraction volume fraction density

UNE-EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
UNE-ISO 16586:2006 Soil quality -- Determination of soil water content as a volume fraction on the basis of known dry bulk density -- Gravimetric method (ISO 16586:2003)
UNE 77213:1997 AIR QUALITY. PARTICLE SIZE FRACTION DEFINITIONS FOR HEALTH-RELATED SAMPLING.
UNE-EN ISO 7971-3:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
UNE-EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
UNE-EN 14187-4:2017 Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals
UNE-EN ISO 787-11:1996 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 11: DETERMINATION OF TAMPED VOLUME AND APPARENT DENSITY AFTER TAMPING. (ISO 787-11:1981).

FI-SFS, mass fraction volume fraction density

SFS 3315-1978

Professional Standard - Commodity Inspection, mass fraction volume fraction density

SN/T 1797.12-2008 Technical regulation on safety and sanitation for inspection of iron ore.Part 12:Bulk density for quality evaluation

KR-KS, mass fraction volume fraction density

KS I ISO 11461-2021 Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method
KS I ISO 7708-2021 Air quality — Particle size fraction definitions for health-related sampling
KS M ISO 21687-2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS X ISO 8000-62-2021 Data quality — Part 62: Data quality management: Organizational process maturity assessment: Application of standards relating to process assessment
KS C IEC 61779-5-2003(2023)
KS C IEC 61779-3-2003(2023)
KS M ISO 3233-3-2021 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with KS M ISO
KS I ISO 10705-3-2015 Water quality — Detection and enumeration of bacteriophages — Part 3: Validation of methods for concentration of bacteriophages from water
KS I ISO 10705-3-2021 Water quality — Detection and enumeration of bacteriophages —Part 3: Validation of methods for concentration of bacteriophages from water
KS C IEC 61779-4-2003(2023)
KS M ISO 3233-3-2016 Paints and varnishes ━ Determination of the percentage volume of non-volatile matter ━ Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251,
KS C IEC 61779-2-2003(2023)
KS P ISO 17190-9-2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders –Part 9: Test method for gravimetric determination of flow rate and bulk density

International Electrotechnical Commission (IEC), mass fraction volume fraction density

IEC 61788-5:2000 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement; Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors

ES-UNE, mass fraction volume fraction density

UNE-EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001) (Endorsed by AENOR in May of 2014.)
UNE-EN ISO 7971-3:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019)
UNE-EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in December of 2018.)
UNE-EN 16966:2022 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
UNE-EN ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density...
UNE-ISO 8000-64:2023 Data quality — Part 64: Data quality management: Organizational process maturity assessment: Application of the Test Process Improvement method
UNE-ISO 8000-116:2023 Data quality — Part 116: Master data: Exchange of quality identifiers: Application of ISO 8000-115 to authoritative legal entity identifiers
UNE-ISO 8000-62:2023 Data quality — Part 62: Data quality management: Organizational process maturity assessment: Application of standards relating to process assessment
UNE-EN 16186-1:2015+A1:2019 Railway applications - Driver's cab - Part 1: Anthropometric data and visibility

Professional Standard - Agriculture, mass fraction volume fraction density

NY/T 1881.6-2010 Densified biofuel-Test methods Part 6:Bulk density

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, mass fraction volume fraction density

GJB 5382.4-2005 Test methods of physical parameter for pyrotechnic. Part 4: Determination of bulk density. Standard measuring cylinder method
GJB 5382.5-2005 Test methods of physical parameter for pyrotechnic. Part 5: Determination of bulk density. Glass measuring cylinder method
GJB 5382.3-2005 Test methods of physical parameter for pyrotechnic. Part 3: Determination of density for columnar (blocky) sample. Liquid static weighing method

Military Standard of the People's Republic of China-General Armament Department, mass fraction volume fraction density

GJB 8683.4-2015 Test methods for physical parameters of pyrotechnics Part 4: Standard graduated cylinder method for determination of bulk density
GJB 8683.5-2015 Test methods for physical parameters of pyrotechnics Part 5: Determination of bulk density using glass measuring cylinder method
GJB 8683.3-2015 Test methods for physical parameters of pyrotechnics Part 3: Determination of density of grain column (block) Hydrostatic weighing method
GJB 2589.2A-2021 Test methods for physical and chemical properties of military leather fur Part 2: Determination of apparent density and mass per unit area

AT-ON, mass fraction volume fraction density

ONORM M 6273-2000 Water analysis-Analysis of activated sludge-Determination of the settled share of sludge volume,the dry residue and the sludge volume index

CEN - European Committee for Standardization, mass fraction volume fraction density

EN ISO 7971-3:2019 Cereals - Determination of bulk density@ called mass per hectolitre - Part 3: Routine method
EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration@ surface area concentration and mass concentration

European Committee for Standardization (CEN), mass fraction volume fraction density

EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
EN ISO 4590:1995 Cellular Plastics - Determination of Volume Percentage of Open and Close Cells of Rigid Materials (ISO 4590:1981)
EN ISO 3233-2:2019 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Arc
EN ISO 4590:2003 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells ISO 4590: 2002
EN ISO 3233-2:2014 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Arc
EN ISO 15212-2:2002 Oscillation-type density meters - Part 2: Process instruments for homogenous liquids (ISO 15212-2:2002)
EN ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of
CEN EN 13040-2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
CEN EN 13040-2007_ Soil improvers and growing media — Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
EN 14187-4:2017 Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals
EN 16186-1:2014 Railway applications - Driver's cab - Part 1: Anthropometric data and visibility
EN 14187-4:2003 Cold applied joint sealants - Part 4: Test method for the determination of the change in mass and volume after immersion in test fuel
EN 12373-2:1998 Aluminium and Aluminium Alloys - Anodizing - Part 2: Determination of Mass Per Unit Area (Surface Density) of Anodic Oxidation Coatings - Gravimetric Method Ratified European Text
EN ISO 787-11:1995 General Methods of Test for Pigments and Extenders - Part 11: Determination of Tamped Volume and Apparent Density After Tamping (ISO 787-11 : 1981)
EN ISO 15212-2:2002/AC:2009 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002/Cor 1:2008)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, mass fraction volume fraction density

GB/T 13477.19-2017 Test method for building sealants—Part 19：Determination of change in mass and volume
GB/T 36053-2018 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry—Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

Professional Standard - Machinery, mass fraction volume fraction density

JB/T 54289-1999 Measuring tools, measuring instruments, product quality grading, electronic digital display height calipers
JB/T 54288-1999 Measuring tools, measuring instruments, product quality grading, electronic digital display depth calipers

Indonesia Standards, mass fraction volume fraction density

SNI 05-6047.1-1999 Heat exchanger - Method for parameter measurement for performance determination. Part 1: Temperature and fluid quality

CENELEC - European Committee for Electrotechnical Standardization, mass fraction volume fraction density

EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity@ density and stacking factor of electrical steel strip and sheet
EN 61779-5:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 5: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Gas

未注明发布机构, mass fraction volume fraction density

BS 6404-13:1996(1999) Magnetic materials — Part 13 : Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
BS EN ISO 787-11:1995(2000) General methods of test for pigments and extenders — Part 11 : Determination of tamped volume and apparent density after tamping
DIN EN ISO 7971-3:2019 Cereals – Determination of bulk density, so-called mass per hectoliter – Part 3: Routine procedures (ISO 7971-3:2019)
DIN EN ISO 4259-1:2020 Petroleum products – Precision of measurement methods and results – Part 1: Determination of precision data of test methods

American Society for Testing and Materials (ASTM), mass fraction volume fraction density

ASTM D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
ASTM D7708-14 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks

Zhejiang Provincial Standard of the People's Republic of China, mass fraction volume fraction density

DB3301/T 0364.1-2022 Public Data Quality Governance Part 1: Architecture

National Aeronautics and Space Administration (NASA), mass fraction volume fraction density

NASA-CR-213199 VOL 5-2004 Numerical, Analytical, Experimental Study of Fluid Dynamic Forces in Seals Volume 5-Description of Seal Dynamics Code DYSEAL and Labyrinth Seals Code KTK

Lithuanian Standards Office , mass fraction volume fraction density

LST EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
LST EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
LST EN 60404-13-2008 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip (IEC 60404-13:1995)
LST EN ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of
LST EN 14187-4-2004 Cold applied joint sealants - Part 4: Test method for the determination of the change in mass and volume after immersion in test fuel
LST EN ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)
LST EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)

IN-BIS, mass fraction volume fraction density

IS 6441 Pt.1-1972

Group Standards of the People's Republic of China, mass fraction volume fraction density

T/GTIA 2.3-2016 Product System Part 3: Quality and Quantity Evaluation of Timber and Wood Products
T/NJ 1271-2020 Tractors—Quality data management and analytics system—System architecture and functional requirements

中国气象局, mass fraction volume fraction density

QX/T 510-2019 Atmospheric composition observation data quality control method Reactive gases

Professional Standard - Post and Telecommunication, mass fraction volume fraction density

YD/T 2329.6-2011 The technical architecture for packet telecommunication data network (PTDN).part 6:security and quality of service

TH-TISI, mass fraction volume fraction density

TIS 1780.11-1999 General methods of test for pigments and extenders.part 11: determination of tamped volume and apparent density after tamping

国家市场监督管理总局、中国国家标准化管理委员会, mass fraction volume fraction density

GB/T 6683.1-2021 Petroleum and related products—Precision of measurement methods and results—Part 1: Determination of precision data in relation to methods of test

Japanese Industrial Standards Committee (JISC), mass fraction volume fraction density

JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
JIS B 8397:2002 Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities

ETSI - European Telecommunications Standards Institute, mass fraction volume fraction density

TR 102 775-2009 Speech and multimedia Transmission Quality (STQ); Guidance on objectives for Quality related Parameters at VoIP Segment-Connection Points (V1.2.1)

Standard Association of Australia （SAA）, mass fraction volume fraction density

AS 3778.3.4:2022 Measurement of water flow in open channels, Part 3.4: Velocity-area methods — Collection and processing of data for determination of uncertainties in measurement (ISO 1088:2007, IDT)

RO-ASRO, mass fraction volume fraction density

STAS 2213/3-1968

Ningxia Provincial Standard of the People's Republic of China, mass fraction volume fraction density

DB64/T 1829.4-2022 Ningxia's "six new" industry high-quality development standard system part 4: digital information

International Telecommunication Union (ITU), mass fraction volume fraction density

ITU-T P.1201.2-2012 Parametric non-intrusive assessment of audiovisual media streaming quality – Higher resolution application area (Study Group 12)