ZH

RU

ES

biphasic lab

biphasic lab, Total:328 items.

In the international standard classification, biphasic lab involves: Milk and milk products, On-board equipment and instruments, Measurement of time, velocity, acceleration, angular velocity, Welding, brazing and soldering, Pumps, Iron and steel products, Pipeline components and pipelines, Ferrous metals, Testing of metals, Products of the chemical industry, Rotating machinery, Electrical equipment for working in special conditions, General methods of tests and analysis for food products, Fertilizers, Particle size analysis. Sieving, Shipbuilding and marine structures in general, Medical sciences and health care facilities in general, Organic chemicals, Products of the textile industry, Fibre optic communications, Farming and forestry, Protection against crime, Vocabularies, Non-ferrous metals, Burners. Boilers, Microbiology, Water quality, Meat, meat products and other animal produce, Sugar. Sugar products. Starch, Radiation protection, Aerospace engines and propulsion systems, Flexible drives and transmissions, Continuous handling equipment, Analytical chemistry, Materials and articles in contact with foodstuffs, Medical equipment, Ergonomics, Materials for aerospace construction, Pesticides and other agrochemicals, Non-destructive testing, Thermodynamics and temperature measurements.


International Organization for Standardization (ISO), biphasic lab

  • ISO 10932:2010 Milk and milk products - Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB)
  • ISO 10932:2010 | IDF 223:2010 Milk and milk products — Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB)
  • ISO 10932:2010|IDF 223:2010 Minimum inhibitory concentration (MIC) determination of antibiotics suitable for bifidobacteria and non-enterococcal lactic acid bacteria (LAB) in milk and dairy products
  • ISO 14250:2000 Steel - Metallographic characterization of duplex grain size and distributions
  • ISO/FDIS 13164-4 Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting
  • ISO 1275:2006 Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors
  • ISO 20769-2:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection

British Standards Institution (BSI), biphasic lab

  • BS ISO 10932:2010 Milk and milk products - Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB)
  • BS EN 15360:2007 Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC)
  • BS EN IEC 62220-2-1:2023 Medical electrical equipment. Characteristics of digital X-ray imaging devices - Determination of dual-energy subtraction efficiency. Detectors used for dual-energy radiographic imaging
  • BS EN 16407-2:2014 Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays. Double wall radiographic inspection
  • BS ISO 1275:2006 Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors
  • BS EN ISO 20769-2:2018 Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Double wall radiographic inspection

Association Francaise de Normalisation, biphasic lab

  • NF L72-130:1980 Transmetteurs tachymétriques triphasés bipolaires
  • NF U44-600*NF EN 15360:2007 Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC)
  • NF EN 15360:2007 Engrais - Détermination de la teneur en dicyandiamide - Méthode par chromatographie liquide à haute performance (CLHP)
  • NF T90-462*NF EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
  • NF E26-103*NF ISO 1275:2006 Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors
  • NF EN ISO 11215:1998 Amidons et fécules modifiés - Détermination de la teneur en acide adipique dans les adipates de diamidon acétylés - Méthode par chromatographie en phase gazeuse.
  • NF ISO 1275:2006 Chaînes de précision à rouleaux à pas double, plaques-attaches et pignons dentés correspondants pour transmission et manutention
  • NF EN IEC 62220-2-1:2023 Appareils électromédicaux - Caractéristiques des dispositifs d'imagerie à rayonnement X - Partie 2-1 : détermination de l'efficacité de soustraction à double énergie - Détecteurs utilisés en imagerie radiographique à double énergie
  • NF A09-254-2:2014 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2 : Double wall radiographic inspection

Association of German Mechanical Engineers, biphasic lab

Professional Standard - Machinery, biphasic lab

  • JB/T 12752-2015 Multiphase twin screw pump
  • JB/T 6741-1993 YSD series pole change double speed three-phase asynchronous motors
  • JB/T 6741-2013 YSD series two-speed pole-changing three-phase asynchronous motors
  • JB/T 6307.5-1994 Power Semiconductor Module Test Methods Bipolar Transistors Single-Phase Bridge and Three-Phase Bridge
  • JB/T 12379-2015 Corrosion-resistant duplex (austenite-ferrite) stainless steel castings for general application
  • JB/T 12380-2015 Corrosion-resistant duplex (austenite-ferrite) stainless steel casting for pressure-containing parts
  • JB/T 12301-2015 Specification of YBSD series double-speed flameproof three-phase asynchronous motor for mining use
  • JB/T 8954-1999 YZLP range of two-value capacitor single-phase induction motors for flat wagon technical specifications
  • JB/T 8954-2010 Technical specification for YZLP range of two-value capacitor single-phase induction motors for flat wagon
  • JB/T 8954-2017 Specifications for double-value capacitor single-phase asynchronous motors for YZLP series flat cars
  • JB/T 5869-2005 Technical specification for YBZS range of flame-proof double-speed three-phase induction motors for crane application
  • JB 5869-1991 Specifications for YBZS series flameproof two-speed three-phase asynchronous motors for hoisting
  • JB/T 7588-1994 Technical specification for YL series double value capacitor monophase asynchronous motors (frame size 80-132)
  • JB/T 7588-2010 Specification for YL series with two capacitor single-phase induction motor(frame size 80~132)
  • JB/T 7076-2002 Technical specification for YEZS range of double-speed conical-rotor brake three-phase induction motors for crane application
  • JB/T 7076-2013 Specification for YEZS series double-speed conical-rotor braking three-phase induction motors for crane application
  • JB/T 7076-1993 Technical conditions of YEZS series two-speed conical rotor braking three-phase asynchronous motors for hoisting
  • JB/T 10745-2007 YZRS Range of wound-rotor double-speed three-phase induction motors for crane and metallurgical application technical specifications

Group Standards of the People's Republic of China, biphasic lab

  • T/NDAS 59-2022 Duplex stainless steel seamless pipe
  • T/JSQA 135-2022 Factory-Made Duplex Stainless Steel Pipe Fittings
  • T/ZZB 0591-2018 Austenitic-Ferritic (duplex) stainless steel bars
  • T/ZZB 2136-2021 Flame-proof two capacitor single-phase asynchronous motor
  • T/CSTA 0003-2020 Austenitic-Ferritic duplex stainless steel round tube billet for forging and rolling
  • T/SSEA 0067-2020 Austenitic-ferritic duplex stainless steel round tube billet
  • T/SSEA 0082-2020 Non-quenched and tempered dual-phase cold heading steel wire rod for high-strength fasteners
  • T/CACM 1142-2018 Traditional Chinese medicine guidelines for the diagnosis and treatment of mental diseases- Bipolar disorder
  • T/ZZB 3023-2022 Hot rolled plate,sheet and strip of duplex stainless steel (022Cr23Ni5Mo3N) for marine engineering
  • T/SSEA 0025-2019 Hot rolled plate and strip of duplex stainless steel
  • T/GDPHA 010-2021 Data Element Standard for Clinical Scientific Research of Bipolar Disorder
  • T/CSTA 0034-2023 Economical duplex stainless steel cold-rolled steel strip for city bus body
  • T/SSEA 0285-2023 Economical duplex stainless steel cold-rolled steel strip for city bus body
  • T/SBX 042-2021 Determination of Purity of Bicyclohexylbiphenyl Liquid Crystal Monomers by Gas Chromatography
  • T/SATA 033-2022 Determination of oxyphenisatin acetate in foods—HPLC-MS/MS method
  • T/SBX 043-2021 Determination of Purity of Dicyclohexyl Phenyl Liquid Crystal Monomers by Gas Chromatography
  • T/CSBME 055-2022 Method for measuring Bisphenol A(BPA) dissolution in hemodialyzer GC-MS(gas chromatography-mass spectrography)
  • T/ZNZ 162-2023 Determination of streptomycin and dihydrostreptomycin residues in grape -method of liquid chromatography- tandem mass spectrometry
  • T/CAMDI 077-2022 Test method for residual of dicyclopentadiene from medical styrenic thermoplastic elastomer gas chromatography method
  • T/CITS 0005-2021 Determination of bisphenol compounds in plastic materials and products contacted with food-Ultra performance convergence chromatography

RU-GOST R, biphasic lab

  • GOST R ISO 14250-2013 Steel. Metallographic characterization of duplex grain size and distribution
  • GOST EN 15360-2015 Fertilizers. Determination of dicyandiamide by high-performance liquid chromatography method
  • GOST 34743-2021 Fish food products. Method for determining mycotoxins in bivalves using high-performance liquid chromatography with mass spectrometric detection

Korean Agency for Technology and Standards (KATS), biphasic lab

  • KS D ISO 14250-2003(2013) Steel-Metallographic characterization of duplex grian size and distributions
  • KS M 1971-2017 Diacetone alcohol and hexylene glycol for industrial use-Miscibility with water
  • KS I 9246-2021 Determination of bisphenol A and its structural analogues in paper products — High performance liquid chromatography

Professional Standard - Energy, biphasic lab

  • NB/T 20277-2014 Welding specification for A240 (S32101) duplex stainless steel
  • NB/T 20007.34-2015 Stainless steel for pressurized water reactor nuclear power plants.Part 34: 03Cr22Mn5Ni2MoCuN duplex stainless steel plates for modules
  • NB/T 20007.34-2015 Stainless steel for pressurized water reactor nuclear power plant Part 34: 03Cr22Mn5Ni2MoCuN duplex stainless steel plate for modules

US-FCR, biphasic lab

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, biphasic lab

  • GB/T 41754-2023 Duplex stainless steel plate used for nuclear power plants
  • GB/T 6401-1986 Micrographic method for determining area fraction of the alpha-phases using charts in ferritic-austenitic stainless steels
  • GB/T 31303-2014 Austenitic-Ferritic duplex stainless steel bars
  • GB/T 21832-2008 Austenitic-Ferritic(duplex)grade stainless steel welded tubes and pipes
  • GB/T 21833-2008 Austenitic-Ferritic(duplex)grade stainless steel seamless tubes and pipes
  • GB/T 10403-1989 Multipolar and two-speed induction phase shifters,general specification for
  • GB/T 23383-2009 Determination of sodium hydrogen diacetate in foods.High performance liquid chromatography method
  • GB/T 10403-2007 General specification for multipolar and two-speed induction phase shifters
  • GB/T 20564.2-2017 Continuously cold rolled high strength steel sheet and strip for automobile.Part 2: Dual phase steel
  • GB/T 20564.2-2006 Continuously cold rolled high strength steel sheet and strip for automobile. Part 2: Dual phase steel
  • GB/T 21169-2007 Determination of amitraz and metabolite residues in honey-Liquid chromatography
  • GB/T 20887.3-2010 Continuously hot rolled high strength steel sheet and strip for automobile.Part 3:Dual phase steel
  • GB/T 20564.2-2017(英文版) Continuously cold rolled high strength steel sheet and strip for automobile—Part 2:Dual phase steel
  • GB/T 21968-2008 Technical specification for YBZS range of flame-proof double-speed three-phase induction motors for crane application
  • GB/T 21164-2007 Determination of streptomycin、dihydrostreptomycin residues in royal jelly-Liquid chromatography method
  • GB/T 32889-2016 Determination of tetrabromobisphenol A in electrical and electronic products by gas chromatography-mass spectrometry
  • GB/T 30939-2014 Determination of the contaminant bisphenol A in cosmetics.High performance liquid chromatograpy-tandem mass spectrometry
  • GB/T 21832.2-2018 Welded austenitic-ferritic (duplex) stainless steel tubes and pipes.Part 2:Pipes for fluid transport
  • GB/T 21832.2-2018(英文版) Welded austenitic《Arial》ferritic (duplex) stainless steel tubes and pipes—Part 2:Pipes for fluid transport
  • GB/T 21832.1-2018(英文版) Welded austeniticferritic (duplex) stainless steel tubes and pipes—Part 1:Tubes for heat exchanger

American Society for Testing and Materials (ASTM), biphasic lab

  • ASTM A1088-13 Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)
  • ASTM A1088-13(2019) Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)
  • ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM A1084-13 Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A1084-15a Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A1084-15a(2022) Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A1084-15 Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A1049/A1049M-18(2023) Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
  • ASTM A923-22 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A923-23 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A1049/A1049M-18 Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
  • ASTM A1079-17(2023) Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-D
  • ASTM A923-98 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A923-01e1 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A923-03 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A1079-12 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A1079-13 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A1079-13e1 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A1079-17 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A890/A890M-99(2003) Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
  • ASTM A351/A351M-03 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
  • ASTM A351/A351M-05 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
  • ASTM A890/A890M-99 Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
  • ASTM A890/A890M-99(2007) Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
  • ASTM A995/A995M-19 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
  • ASTM A995/A995M-98(2007) Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
  • ASTM A995/A995M-98(2003) Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
  • ASTM A890/A890M-10 Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
  • ASTM A995/A995M-18a Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
  • ASTM A995/A995M-12a Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
  • ASTM A995-98 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
  • ASTM A995/A995M-20 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
  • ASTM A1079-13e2 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A890/A890M-18 Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
  • ASTM A890/A890M-18a Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
  • ASTM A748/A748M-87(2003) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
  • ASTM A1082/A1082M-12 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
  • ASTM A1082/A1082M-16(2021) Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
  • ASTM A995/A995M-09 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
  • ASTM A928/A928M-04 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  • ASTM D7574-23 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
  • ASTM A1082/A1082M-15 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
  • ASTM A923-06 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A928/A928M-08 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  • ASTM A928/A928M-08a Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  • ASTM A928/A928M-05 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  • ASTM A928/A928M-00 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  • ASTM A928/A928M-11 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  • ASTM A928/A928M-14(2021) Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  • ASTM D8266-19 Standard Test Method for Analysis of Bisphenol A (4,4`-Isopropylidenediphenol) by High Performance Liquid Chromatography
  • ASTM A923-08 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A928/A928M-13 Standard Specification for Ferritic/Austenitic lpar;Duplexrpar; Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  • ASTM A923-14 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
  • ASTM A928/A928M-14 Standard Specification for Ferritic/Austenitic &40;Duplex&41; Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  • ASTM A1082/A1082M-16 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
  • ASTM A1049/A1049M-06 Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
  • ASTM D7574-09 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
  • ASTM A1049/A1049M-10 Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
  • ASTM A1049/A1049M-10(2015) Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
  • ASTM E574-23 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
  • ASTM D7574-16 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry

Defense Logistics Agency, biphasic lab

  • DLA SMD-5962-88774 REV C-2011 MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, DUAL AND-OR-INVERT GATE, MONOLITHIC SILICON
  • DLA MIL-M-38510/74 C VALID NOTICE 1-2010 Microcircuits, Digital, Bipolar, Schottky TTL, and-or-Invert Gates, Monolithic Silicon
  • DLA MIL-M-38510/334 C VALID NOTICE 1-2008 MICROCIRCUITS, DIGITAL, BIPOLAR ADVANCED SCHOTTKY TTL, AND-OR-INVERT GATES, MONOLITHIC SILICON
  • DLA MIL-M-38510/334 C VALID NOTICE 2-2013 Microcircuits, Digital, Bipolar Advanced Schottky TTL, and-or-Invert Gates, Monolithic Silicon
  • DLA SMD-5962-89438 REV B-2012 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, 10-NONINVERTING REGISTER, MONOLITHIC SILICON
  • DLA SMD-5962-88729 REV B-2008 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, HEX INVERTING DRIVERS, MONOLITHIC SILICON
  • DLA SMD-5962-90780 REV C-2012 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, 10-BIT BUS INTERFACE FLIP-FLOPS WITH NON-INVERTING AND INVERTING INPUTS, MONOLITHIC SILICON
  • DLA MIL-DTL-24646/6 B-2008 FUSE BOXES, FEEDER DISTRIBUTION, WITH SWITCHES, TOTALLY ENCLOSED, 125 VOLTS, ALTERNATING CURRENT, SINGLE AND THREE PHASE BUSES, SINGLE AND DOUBLE FEEDER, SINGLE PHASE BRANCHES, 0-30 AMPERE MIDGET FUSES AND SNAP SWITCHES, SYMBOLS 602, 603, 604, 605, 606,
  • DLA MIL-DTL-24646/11 B-2008 FUSE BOXES, FEEDER DISTRIBUTION, WITH SWITCHES, WATERTIGHT (3 FEET), 125 VOLTS, ALTERNATING CURRENT, SINGLE AND THREE PHASE BUSES, SINGLE AND DOUBLE FEEDERS, SINGLE PHASE BRANCHES, 0-30 AMPERE MIDGET FUSES, AND SNAP SWITCHES, SYMBOLS 645, 645.1, 649.1 AN
  • DLA MIL-DTL-24646/15 B-2008 FUSE BOXES, FEEDER JUNCTION, SUBMERSIBLE, (15 FEET), 250 VOLTS, ALTERNATING CURRENT, FEED THROUGH TWIN CONDUCTORS, SINGLE AND THREE PHASE BUSES, SINGLE AND THREE PHASE BRANCHES, 0-30 AND 31-60 AMPERE FUSES, SYMBOLS 685.1, 686.1, 691.1, AND 692.1
  • DLA MIL-DTL-24558/24 B-2011 TERMINAL BOX, CONNECTION, SUBMERSIBLE (15-FOOT), 500 VOLTS, THREE-PHASE, SYMBOL NO. 416, TWO-CIRCUIT, THREE-PHASE BUS LUGS FOR TWO 75 MCM CABLES
  • DLA SMD-5962-88742 REV B-2011 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY, TTL, HEX NONINVERTING BUFFERS, MONOLITHIC SILICON
  • DLA MIL-DTL-24558/23 B-2011 TERMINAL BOX, CONNECTION, SUBMERSIBLE (15-FOOT), 500 VOLTS, THREE-PHASE, SYMBOL NO. 403.1, TWO-CIRCUIT, THREE-PHASE BUS LUGS FOR TWO 75 MCM CABLES
  • DLA SMD-5962-91725 REV A-2008 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, SCAN TEST DEVICE WITH OCTAL D-TYPE LATCH, THREE-STATE OUTPUTS, MONOLITHIC SILICON
  • DLA SMD-5962-90506 REV B-2012 MICROCIRCUIT, DIGITAL, BIPOLAR, OCTAL BUS TRANSCEIVER WITH THREE-STATE NONINVERTING OUTPUTS, MONOLITHIC SILICON
  • DLA SMD-5962-96658 REV D-2009 MICROCIRCUIT, DIGITAL, BIPOLAR, LOW-POWER SCHOTTKY TTL, HEX SCHMITT-TRIGGER INVERTERS, MONOLITHIC SILICON
  • DLA DSCC-VID-V62/06654-2006 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-V ABT 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS, MONOLITHIC SILICON

Hebei Provincial Standard of the People's Republic of China, biphasic lab

  • DB13/T 2590-2017 Determination of Bisphenol A and Bisphenol F in Fruit and Vegetable Cleaning Agent by High Performance Liquid Chromatography
  • DB13/T 2190.5-2015 Determination of bisphenol A migration in water environment simulants of plastic packaging materials by high performance liquid chromatography

PT-IPQ, biphasic lab

  • E 309-1975
  • NP EN 1597-2-2000 Welding consumables Test methods Part 2:Preparation of test piece for single-run and two-run techinique test specimens in steel

Professional Standard - Coal, biphasic lab

  • MT/T 249-1997 Flameproof mining type double speed three-phase induction motors

Ningxia Provincial Standard of the People's Republic of China, biphasic lab

国家市场监督管理总局、中国国家标准化管理委员会, biphasic lab

  • GB/T 39033-2020 Austenitic-ferritic duplex stainless steel wire rods
  • GB/T 39077-2020 Test methods for detecting detrimental phases in lean duplex austenitic-ferritic stainless steels
  • GB/T 39882-2021 Examination methods for methylene dioxymetham phetamine in suspected drugs—Gas chromatography and gas chromatography-mass spectrometry
  • GB/T 20887.3-2022 Continuously hot rolled high strength steel sheet and strip for automobile—Part 3: Dual phase steel
  • GB/T 21968-2020 YBZS series flameproof double-speed three-phase induction motors for crane application—Technical specification
  • GB/T 21832.1-2018 Welded austenitic-ferritic (duplex) stainless steel tubes and pipes—Part 1:Tubes for heat exchanger
  • GB/T 20564.12-2019 Continuously cold rolled high strength steel sheet and strip for automobile—Part 12:Dual phase steel with high formability
  • GB/T 21833.1-2020 Seamless austenitic-ferritic (duplex) stainless steel tubes and pipes—Part 1: Tubes for heat exchanger
  • GB/T 21833.2-2020 Seamless austenitic-ferritic (duplex) stainless steel tubes and pipes—Part 2: Pipes for fluid service

煤炭工业部, biphasic lab

  • MT/T 249-1991 Mine explosion-proof two-speed three-phase asynchronous motor

Military Standard of the People's Republic of China-General Armament Department, biphasic lab

  • GJB 2144-1994 General specifications for multipole and dual-channel inductive phase shifters

IETF - Internet Engineering Task Force, biphasic lab

  • RFC 7551-2015 RSVP-TE Extensions for Associated Bidirectional Label Switched Paths (LSPs)

Professional Standard-Ships, biphasic lab

  • CB/T 4362-2013 Duplex(austenitic/ferritic) stainlesssteel castings for ships

SAE - SAE International, biphasic lab

  • SAE AMS6953-2018 Titanium Alloy Sheet 6Al – 4Sn – 3Nb – 0.5Mo – 0.3Si@ Duplex Annealed (UNS R56643)
  • SAE AMS4916A-1966 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 8Al - 1Mo - 1V Duplex Annealed
  • SAE AMS4916B-1968 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 8Al - 1Mo - 1V Duplex Annealed
  • SAE AMS4916F-1990 Titanium Alloy Sheet@ Strip@ and Plate 8Al - 1Mo - 1V Duplex Annealed
  • SAE AMS4916D-1977 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 8Al - 1Mo - 1V Duplex Annealed
  • SAE AMS4916C-1976 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 8Al - 1Mo - 1V Duplex Annealed
  • SAE AMS4916-1966 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 8Al - 1Mo - 1V Duplex Annealed
  • SAE AMS6910B-2015 Titanium Alloy Bars@ Forgings and Forging Stock 8Al - 1Mo - 1V Duplex Annealed (UNS R54810)
  • SAE AMS4919C-1989 Titanium Alloy Sheet@ Strip@ and Plate 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed
  • SAE AMS4916L-2017 Titanium Alloy Sheet@ Strip@ and Plate 8Al - 1Mo - 1V Duplex Annealed (UNS R54810)
  • SAE AMS4916G-2003 Titanium Alloy Sheet@ Strip@ and Plate 8Al - 1Mo - 1V Duplex Annealed (UNS R54810)
  • SAE AMS4916E-1984 TITANIUM ALLOY SHEET@ STRIP@ AND PLATE 8Al - 1Mo - 1V Duplex Annealed (UNS R54810)
  • SAE AMS6910C-2018 Titanium Alloy Bars@ Forgings and Forging Stock 8Al - 1Mo - 1V Duplex Annealed (UNS R54810)
  • SAE AMS6905A-2011 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Duplex Annealed (UNS R54620)
  • SAE AMS6905C-2018 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Duplex Annealed (UNS R54620)
  • SAE AMS4919D-2003 Titanium Alloy Sheet@ Strip@ and Plate 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed (UNS R54620)
  • SAE AMS4931-1987 TITANIUM ALLOY BARS@ FORGINGS@ AND RINGS 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed@ Fracture Toughness (UNS R56400)
  • SAE AMS4931A-1993 Titanium Alloy Bars@ Forgings@ and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed@ Fracture Toughness (UNS R56400)

Danish Standards Foundation, biphasic lab

  • DS/EN 15360:2007 Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC)
  • DS 95:1933 Tangential keys and keyways for bidirectional torque. Shaft diameter and corresponding keyway section

Lithuanian Standards Office , biphasic lab

  • LST EN 15360-2007 Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC)
  • LST ISO 29981:2010 Milk products - Enumeration of presumptive bifidobacteria - Colony count technique at 37 °C (ISO 29981:2010, identical)

AENOR, biphasic lab

  • UNE-EN 15360:2007 Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC)

Society of Automotive Engineers (SAE), biphasic lab

  • SAE AMS6953A-2022 Titanium Alloy Sheet, 6Al – 4Sn – 3Nb – 0.5Mo – 0.3Si, Duplex Annealed
  • SAE AMS4916F-1994 TITANIUM ALLOY SHEET, STRIP, AND PLATE 8A1 - 1Mo - 1V Duplex Annealed
  • SAE AMS4916K-2014 Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed
  • SAE AMS6910D-2022 Titanium Alloy Bars, Forgings and Forging Stock, 8Al - 1Mo - 1V, Duplex Annealed
  • SAE AMS4916M-2022 Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed
  • SAE AMS6907C-2020 Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Duplex Annealed
  • SAE AMS4919C-1994 TITANIUM ALLOY SHEET, STRIP, AND PLATE 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed
  • SAE AMS4919J-2019 Titanium Alloy Sheet, Strip, and Plate 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed
  • SAE AMS6907B-2015 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Duplex Annealed (UNS R56260)
  • SAE ARP4028-1994 Aircraft/Engine Fuel Pump Two Phase (Slugging Flow) Inlet Performance Test and Evaluation
  • SAE AMS4931-1992 TITANIUM ALLOY BARS, FORGINGS, AND RINGS 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
  • SAE AMS4931F-2019 Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
  • SAE AMS4931G-2019 Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
  • SAE AMS4931E-2015 Titanium Alloy Bars@ Forgings@ and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed@ Fracture Toughness (UNS R56400)

German Institute for Standardization, biphasic lab

  • DIN CEN/TS 15360:2006 Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC); German version CEN/TS 15360:2006
  • DIN EN 15360:2007-08 Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC); German version EN 15360:2007
  • DIN EN 15360:2007 Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC); English version of DIN EN 15360:2007-08
  • DIN ISO 1275:2012-07 Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors (ISO 1275:2006)
  • DIN ISO 2271:1982 Surface active agents; detergents; determination of anionic-active matter (direct two-phase titration procedure)
  • DIN 50923:2013-02 Electroplated coatings - Duplex systems of zinc or zinc alloy coatings with organic coatings on iron or steel
  • DIN ISO 1275:2012 Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors (ISO 1275:2006)
  • DIN ISO 6526:1986-05 Plain bearings; pressed bimetallic half thrust washers; features and tolerances; identical with ISO 6526, edition 1983 / Note: To be replaced by DIN ISO 6526 (2022-11).
  • DIN EN IEC 62220-2:2022-11 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 2: Determination of dual-energy subtraction efficiency - Detectors used for dual-energy radiographic imaging (IEC/CDV 62220-2:2022); German and English version prEN ...
  • DIN 895:1987 Engineers wrenches, double head, open end, with unequal jaw widths; test torques series D

API - American Petroleum Institute, biphasic lab

  • API TR 938-C-2005 Use of Duplex Stainless Steels in the Oil Refining Industry (First Edition)
  • API TR 938-C-2011 Use of Duplex Stainless Steels in the Oil Refining Industry (Second Edition)
  • API TR 938-C-2015 Use of Duplex Stainless Steels in the Oil Refining Industry (THIRD EDITION)

工业和信息化部, biphasic lab

  • YB/T 6025-2022 Duplex stainless steel hot rolled steel plates for shipbuilding and offshore engineering
  • YD/T 2969.2-2018 100Gbit/s dual polarization quadrature phase shift keying (DP-QPSK) optical transceiver module Part 2: CFP coherent optical module
  • JB/T 7076-2020 Technical specifications of YEZS series two-speed conical rotor braked three-phase asynchronous motor for hoisting
  • YD/T 2969.3-2018 100Gbit/s dual polarization quadrature phase shift keying (DP-QPSK) optical transceiver module Part 3: CFP2-ACO optical module
  • YD/T 2969.4-2019 100Gbit/s dual polarization quadrature phase shift keying (DP-QPSK) optical transceiver module Part 4: CFP2-DCO optical module
  • YD/T 2969.1-2015 100Gbit/s dual polarization quadrature phase shift keying (DP-QPSK) optical transceiver module Part 1: 168-pin optical module

国家煤矿安全监察局, biphasic lab

  • MT/T 249-2019 YBSD series mine flameproof two-speed three-phase asynchronous motor

国家质量监督检验检疫总局, biphasic lab

  • SN/T 4424-2016 Determination of bisphenol A in imported and exported textiles by liquid chromatography
  • SN/T 3184-2012 Food contact materials Determination of bis(hydroxyphenyl)methane-bis(2,3-epoxypropyl) ether in polymer food simulants Gas chromatography-mass spectrometry
  • SN/T 4521-2016 Determination of Streptomycin and Dihydrostreptomycin in Exported Tomato Sauce by Liquid Chromatography-Mass Spectrometry/Mass Spectrometry
  • SN/T 4778-2017 Determination method of streptomycin and dihydrostreptomycin in exported pollen by liquid chromatography-mass spectrometry/mass spectrometry

Professional Standard - Post and Telecommunication, biphasic lab

  • YD/T 2618.3-2014 40Gb/s phase modulation formats optical transponder.Part 3:Coherent reception and dual-polarization quadrature phase shift keying

Professional Standard - Commodity Inspection, biphasic lab

  • SN/T 3512-2013 Determination of tetrabromobisphenol A bis(2,3-dibromopropyl ether) in electrical and electronic equipment.High performance liquid chromatography
  • SN/T 3822-2014 Determination of bisphenol A in cosmetics for export.Liquid chromatography with fluorescence detection
  • SN/T 3334.3-2013 Determination of bisphenol A in the household appliances.LC-MS/MS
  • SN/T 2104-2008 Determination of dicumarol and cyclocoumarol in cosmetics for import and export.Liquid chromatography
  • SN/T 3150-2012 Determination of bisphenol diglycidyl ether residues in food for export.LC-MS/MS method
  • SN/T 2379-2009 Determination of bisphenol A in polycarbonate resin and its products.Gas chromatography-mass spectrography
  • SN/T 0605-2012 Determination of bitertanol residues in cereals for export.LC-MS/MS method
  • SN/T 3550-2013 Food contact materials.Paper, regenerated fibre.Determination of 4,4'-bis (dimethylamino)-benzophenone and 4,4'-bis(diethylamino)-benzophenone.Gas chromatography-mass spectrometry
  • SN/T 4241-2015 Determination of tetrabromobisphenol A in electrical and electronic equipment.Gas chromatography/electron capture detector

European Committee for Standardization (CEN), biphasic lab

  • EN 15360:2007 Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC)
  • EN 16407-2:2014 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection

(U.S.) Ford Automotive Standards, biphasic lab

  • FORD WSS-M1A368-A11-2012 STEEL, SHEET, COLD ROLLED, DUAL PHASE (CR DP) ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1A368-A12-2012 STEEL, SHEET, COLD ROLLED, DUAL PHASE (CR DP) ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1A368-A13-2012 STEEL, SHEET, COLD ROLLED, DUAL PHASE (CR DP) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
  • FORD WSS-M1A368-A14-2012 STEEL, SHEET, COLD ROLLED, DUAL PHASE (CR DP) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
  • FORD WSS-M1A368-A15-2012 STEEL, SHEET, COLD ROLLED, DUAL PHASE (CR DP) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
  • FORD WSS-M1A368-A31-2012 STEEL, SHEET, HOT ROLLED, DUAL PHASE (HR DP) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
  • FORD WSS-M1A368-A32-2012 STEEL, SHEET, HOT ROLLED, DUAL PHASE (HR DP) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
  • FORD WSS-M1A348-A1-2013 STEEL, SHEET, COLD ROLLED, DUAL PHASE ***TO BE USED WITH FORD WSS-M99P1111-A*** (No direct replacements, use CBP strategy)

Engineering Equipment and Materials Users Association (EEMUA), biphasic lab

  • EEMUA PUB NO 218-2010 Quality requirements for the manufacture and supply of duplex stainless steels (Edition 1)

ES-AENOR, biphasic lab

  • UNE 55-548-1990
  • UNE 55-520-1991 Surface active agents. Detergents. Determination of anionic-active matter. Manual or mechanical direct two-phase titration procedure

Agricultural Standard of the People's Republic of China, biphasic lab

American Gear Manufacturers Association, biphasic lab

  • AGMA 935-A05-2005 Recommendations Relative to the Evaluation of Radial Composite Gear Double Flank Testers

Professional Standard - Agriculture, biphasic lab

  • NY/T 2280-2012 Determination of agaritine in agaricus bisporus by HPLC
  • NY/T 4360-2023 Determination of streptomycin, dihydrostreptomycin and kanamycin in feed by liquid chromatography-tandem mass spectrometry

AGMA - American Gear Manufacturers Association, biphasic lab

  • 935-A05-2005 Recommendations Relative to the Evaluation of Radial Composite Gear Double Flank Testers

Professional Standard - Environmental Protection, biphasic lab

  • HJ 1192-2021 Water Quality Determination of 9 Alkylphenol Compounds and Bisphenol A by Solid Phase Extraction/High Performance Liquid Chromatography

American National Standards Institute (ANSI), biphasic lab

American Society of Mechanical Engineers (ASME), biphasic lab

  • ASME STP-PT-088-2017 Effect of Cooling Rate on the Microstructure and Properties of Duplex Stainless Steel Welds
  • ASME SEC II A SA-995-2001 Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts ASTM A995-98
  • ASME 2427-2001 Chromium-Nickel-Molybdenum-Nitrogen-Tungsten Duplex Stainless Steel UNS S39274 Plate Section VIII, Division 1; (SUPP 10)
  • ASME 2402-2001 SA-995, UNS J92205, (CD3MN), Austenitic/Ferritic Duplex Stainless Steel Section VIII, Division 1 SUPP 8&9

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), biphasic lab

  • ASHRAE CH-06-14-1-2006 Distribution of Water between Vapor and Liquid Phases of Refrigerants See Technical Paper 4845, P.241
  • ASHRAE OR-05-16-2-2005 Altered Bi-Phase Flow Regime in Supermarket Evaporative Coils: Laboratory and Field Experiences

PL-PKN, biphasic lab

  • PN E08307-1992 Safety of household and similar electrical appliances. Particular requirements for commercial electric bains-marie

SE-SIS, biphasic lab

  • SIS SS 436 02 20-1981 Overhead line crossings - Low-voltage line below telecommunication line - Double neutral conductors

American Welding Society (AWS), biphasic lab

  • AWS D10.18M/D10.18-2008 Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing (First Edition)
  • WRC 148:1970 Interaction Curves for Sections Under Combined Biaxial Bending and Axial Force
  • WRC 438:1999 Intermetallic Phase Precipitation in Duplex Stainless Steels and Weld Metals: Metallurgy, Influence on Properties, Welding and Testing Aspects

IX-EU/EC, biphasic lab

  • 90/436/EEC-1990 Convention on the Elimination of Double Taxation in Connection with the Adjustment of Profits of Associated Enterprises

Society of Motion Picture and Television Engineers (SMPTE), biphasic lab

  • SMPTE 173-1999 Motion-Picture Equipment (8-mm Type R) - Double 8-mm Camera Spools - 100-ft Capacity
  • SMPTE ST 173-2004 Motion-Picture Equipment (8-mm Type R) - Double 8-mm Camera Spools - 100-ft Capacity

海关总署, biphasic lab

  • SN/T 4424-2022 Determination of bisphenol compounds in imported and exported textiles by high performance liquid chromatography
  • SN/T 5450-2022 Determination of 9 bis-condensed pyrrolidine alkaloids in foods of animal origin by liquid chromatography-mass spectrometry/mass spectrometry

WRC - Welding Research Council, biphasic lab

  • BULLETIN 438-1999 INTERMETALLIC PHASE PRECIPITATION IN DUPLEX STAINLESS STEELS AND WELD METALS: METALLURGY@ INFLUENCE ON PROPERTIES@ WELDING AND TESTING ASPECTS

Professional Standard - Public Safety Standards, biphasic lab

  • GA/T 1008.5-2013 GC and GC-MS examination methods for drugs.Part 5:MDMA
  • GA/T 1643-2019 Detection of MDMA in Suspected Drugs in Forensic Science by Liquid Chromatography and Liquid Chromatography-Mass Spectrometry
  • GA/T 1622-2019 Gas Chromatography, Gas Chromatography-Mass Spectrometry and Liquid Chromatography-Mass Spectrometry for the Examination of Nereistoxin, Dimehytap, Cyclodime and Cartap in Forensic Science Biological Samples

Professional Standard - Hygiene , biphasic lab

  • WS/T 167-1999 Workplace air.Determination of diketen.Thermal desorption gas chromatographic method

AWS - American Welding Society, biphasic lab

  • D10.18M/D10.18-2008 Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing (First Edition)
  • D10.18M/D10.18-2018 Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing (Second Edition)

BE-NBN, biphasic lab

  • NBN T 63-122-1980 Surface active agents - Detergents- Determination of anionic active matter - Direct two-phase titration method
  • NBN 28-1947

其他未分类, biphasic lab

Shandong Provincial Standard of the People's Republic of China, biphasic lab

  • DB37/T 4477-2021 Determination of Diamide Insecticide Residues in Water by Liquid Chromatography-Tandem Mass Spectrometry

UNKNOWN, biphasic lab

Japanese Industrial Standards Committee (JISC), biphasic lab

  • JIS K 2536-4:2022 Petroleum products -- Testing method of components -- Part 4: Determination of components by dual type gas chromatography

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, biphasic lab

  • GB/T 34455-2017 Paper,board and pulps—Determination of 2,2-bis(4-hydroxyphenyl) propane (bisphenol A )—Liquid chromatography

IT-UNI, biphasic lab

National Health Commission of the People's Republic of China, biphasic lab

  • GB 23200.103-2016 National food safety standards— Determination of amitraz and its metabolites residues in royal jelly Gas chromatography - mass spectrometry

工业和信息化部/国家能源局, biphasic lab

  • JB/T 10745-2016 Technical specifications of YZRS series wound rotor two-speed three-phase asynchronous motor for hoisting and metallurgy

International Telecommunication Union (ITU), biphasic lab

  • ITU-R RAPPORT M.2030 FRENCH-2003 Coexistence between IMT-2000 time division duplex and frequency division duplex terrestrial radio interface technologies around 2 600 MHz operating in adjacent bands and in the same geographical area

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, biphasic lab

  • REPORT M.2030-2003 Coexistence between IMT-2000 time division duplex and frequency division duplex terrestrial radio interface technologies around 2 600 MHz operating in adjacent bands and in the same geographical area

AT-ON, biphasic lab

  • ONORM ISO 2271:1987 Surface active agents; detergents; determination of anionic-active matter (direct two-phase titration procedure)

CEN - European Committee for Standardization, biphasic lab

  • EN ISO 20769-2:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection

International Electrotechnical Commission (IEC), biphasic lab

  • IEC 62220-2-1:2023 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 2-1: Determination of dual-energy subtraction efficiency - Detectors used for dual-energy radiographic imaging

YU-JUS, biphasic lab

  • JUS H.B.714-1980 Analysis of technical 2-chloro-4,6-bis(ethylamino)-l,3,5-triazine. Gas chromatographic determination ofactive ingredient content

中华全国供销合作总社, biphasic lab

  • GH/T 1107-2015 Determination of five doubly-condensed pyrrolidine alkaloids in honey by high-performance liquid chromatography-mass spectrometry/mass spectrometry

未注明发布机构, biphasic lab

  • BS IEC 62220-2-1:2023 Medical electrical equipment — Characteristics of digital X - ray imaging devices Part 2 - 1 : Determination of dual - energy subtraction efficiency — Detectors used for dual - energy radiographic imaging

ES-UNE, biphasic lab

  • UNE-EN IEC 62220-2-1:2023 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 2-1: Determination of dual-energy subtraction efficiency - Detectors used for dual-energy radiographic imaging (Endorsed by Asociación Española de Normalización i...

ANSI - American National Standards Institute, biphasic lab

  • INCITS 263-1995 Information Technology - Fibre Distributed Data Interface (FDDI) - Token Ring Twisted Pair Physical Layer Medium Dependent (TP-PMD)
  • X3.263-1995 Information Technology - Fibre Distributed Data Interface (FDDI) - Token Ring Twisted Pair Physical Layer Medium Dependent (TP-PMD)

Fujian Provincial Standard of the People's Republic of China, biphasic lab

  • DB35/T 1851-2019 Determination of Bisphenol S Migration in Internal Coatings of Metal Food Cans by High Performance Liquid Chromatography-Tandem Mass Spectrometry




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved