ZH
RU
ES
Extended testing machine
Extended testing machine, Total:500 items.
In the international standard classification, Extended testing machine involves: Protection against dangerous goods, Environmental protection, Electrical accessories, Domestic electrical appliances in general, Solar energy engineering, Farming and forestry, Electrical and electronic testing, Electrical wires and cables, Flexible drives and transmissions, Aerospace electric equipment and systems, Testing of metals, Mining equipment, Lubricants, industrial oils and related products, Components and accessories for telecommunications equipment, Telecommunication systems, Non-ferrous metals, Semiconducting materials, Road engineering, Radiocommunications, Leather technology, Waxes, bituminous materials and other petroleum products, Analytical chemistry, Protection against fire, Standardization. General rules, Rubber and plastics products, Thermodynamics and temperature measurements, Components for aerospace construction, On-board equipment and instruments, Internal combustion engines for road vehicles, Products of the textile industry, Construction equipment, Textile fibres, Conducting materials, Aircraft and space vehicles in general, Elements of buildings, Continuous handling equipment, Linear and angular measurements, Ground service and maintenance equipment, Paint coating equipment, Insulating materials, Construction materials, Tyres, Welding, brazing and soldering, Fasteners for aerospace construction, Environmental testing, Paper and board, Surface treatment and coating, Iron and steel products, Rubber, Electrical engineering in general, Electromechanical components for electronic and telecommunications equipment, Materials for the reinforcement of composites, Road vehicles in general, Test conditions and procedures in general, Mechanical testing, Plastics, TESTING, Footwear, Protective equipment, Fuels, Aerosol containers, Fibre optic communications, Materials for aerospace construction, Laboratory medicine, Paints and varnishes, Pulps, Industrial trucks, Sewing machines and other equipment for the clothing industry, Packaging materials and accessories, Ceramics.
GM Europe, Extended testing machine
- GME GMI L-6-4-1998 Extended Vehicle Standing Time ("Airport Test") (English/German; ITDC Release, Draft for Harmonization)
CU-NC, Extended testing machine
- NC 41-45-1987 Leather. Determination of the Elongation to Grain Rupture by Means of the Lastometer Testing Method
- NC 40-73-1985 Textiles. Determination of Puli B reaking Strength and Elongation of Fibres. Testing Methods
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Extended testing machine
- GB/T 21808-2008 Chemicals.Fish,prolonged toxicity:14-day study test
- GB/T 14336-1993 Testing method for length of synthetic staple fibres
- GB/T 2038-1991 Metallic materials--Standard test method for JIC,a measure of ductile fracture toughness
- GB/T 11606.12-1989 The method of environmental test for analytical instruments--Mould growth test
- GB/T 6098.2-1985 Test method for length of cotton fibres--Photoelectric length method
- GB/T 10588-2006 Specifications for mould growth testing chambers
- GB/T 10588-1989 Specification for mould growth test chambers
- GB/T 10588-2006(英文版) Specifications for mould growth testing chambers
- GB/T 31930-2015 Metallic materials.Ductility testing.Compression test for porous and cellular metals
- GB/T 28752-2012 Test method for lateral spread of flame on building and transport products in vertical configuration
- GB/T 2423.16-2022 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth
- GB/T 13780-1992 Test method for cotton length--auto-photoelectric stapler
- GB 6221-1986 Performance test methods of long tube respirators
- GB/T 5887-1986 Testing method of length of ramie fiber
- GB/T 41558-2022 Determination of staple length and strength
- GB/T 13835.2-1992 Test method for mwasure length of Angora rabbit hair
- GB 5887-1986 Test method for ramie fiber length
- GB/T 21805-2008 Chemicals.Alga growth inhibition test
- GB/T 21806-2008 Chemicals.Fish,juvenile growth test
- GB/T 18147.3-2000 Test method for hemp fibre-Part 3:Test method for length of hemp fibre
- GB/T 18147.3-2015 Test method for hemp fiber.Part 3:Test method for length of hemp fiber
- GB/T 25353-2010 Test method to determine the flammability and flame propagation characteristics of thermal/acoustic insulation materials
- GB/T 14644-2014(英文版) Textiles—Burning behaviour—45° test determination of flame spread rate
- GB/T 2423.64-2023 Environmental testing Part 2: Test method Test Fj: Reproduction of long-term vibration history
- GB/T 6976-1986 Test method for measure length of the wool staple natural formation
- GB/T 13835.3-1992 Test method for the percentage of impurities in Angora rabbit hair
- GB/T 421-1978 Test methods of length and width for printed and dyed fabrics
- GB/T 13779-2008 Cotton fibres.Test method for length.Comb sorter method
- GB/T 14345-2003 Testing method for twist of synthetic filament yarns
- GB/T 6976-2007 Test method for measure length of the wool staple natural formation
- GB 6976-1986 Test Method for measure length of the wool staple natural formation
- GB/T 14345-2008 Test method for chemical fiber filament twist
Standard Association of Australia （SAA）, Extended testing machine
- AS/NZS 3120:1999 Approval and test specification - Cord extension sockets
- AS/NZS 3199:2020 Approval and test specification — Cord extension sets
- AS/NZS 3120:2021 Approval and test specification — Cord extension sockets
- AS/NZS 3120:2011
- AS 1462.24:2003 Methods of test for plastics pipes and fittings - Determination of resistance to crack propagation - Test methods for slow crack growth in notched pipes (notch test)
- AS/NZS 2111.14:1996 Textile floor coverings - Tests and measurements - Determination of thickness loss after prolonged, heavy static loading
- AS 2331.4.2:2004 Methods of test for metallic and related coatings - Physical tests - Ductility
- AS 60068.2.10:2003 Environmental testing - Tests - Test J and guidance: Mould growth
- AS/NZS 3629.3:2013
- AS 2001.2.5:1991 Methods of test for textiles - Physical tests - Determination of the number of threads per unit length in woven fabric
International Electrotechnical Commission (IEC), Extended testing machine
- IEC 62892:2019 Extended thermal cycling of PV modules - Test procedure
- IEC 61196-1-108:2011 Coaxial communication cables - Part 1-108: Electrical test methods - Test for characteristic impedance, phase and group delay, electrical length and propagation velocity
- IEC 61196-1-108:2005 Coaxial communication cables - Part 1-108: Electrical test methods - Test for characteristic impedance, phase and group delay, electrical length and propagation velocity
- IEC 60068-2-10:1988 Environmental testing. Part 2: Tests. Test J and guidance : Mould growth
- IEC 60068-2-10:2005 Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
- IEC 60068-2-10:2018 Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
- IEC 60068-2-10:2005+AMD1:2018 CSV Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
- IEC 60068-2-85:2019 Environmental testing – Part 2-85: Tests – Test Fj: Vibration - Long time history replication
- IEC 60512-25-4:2001 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d; Propagation delay
- IEC 60695-9-2:2014 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
- IEC 60695-9-2:2021 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
- IEC 61196-1-308:2005 Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals
- IEC 61196-1-308:2012 Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals
农业农村部, Extended testing machine
- NY/T 3089-2017 Guidelines for first-generation reproduction extension test of chemical pesticides in medaka
Taiwan Provincial Standard of the People's Republic of China, Extended testing machine
- CNS 4619-1995 Method of Test for Water - Cooled Secondary Cables for Portable Spot Welding Machines
- CNS 4618-1995 Water - Cooled Secondary Cables for Portable Spot Welding Machine
- CNS 10871-1984 Terminal for Flat-oval Telephone Cord
- CNS 5625-1980 Shape and Dimension of Joint in Extension Rod for Rock Drill
- CNS 10870-1984 Modular Plug for Flat-oval Telephone Cord
- CNS 10091-1983 Method of Test for Ductility of Bituminous Materials
- CNS 12607-1989 Method of Test for Tensile Breaking Properties of Paper and Paperboard (Using Constant Rate of Elongation Tester)
- CNS 2739-1989 Method of Long Hill Climbing Test for Automobiles
- CNS 12428-2002 Method of Test for Fiber Length of Pulp by Glassification
- CNS 11622-1994 Method of Test for Fiber Length of Pulp by Projection
- CNS 13723-1996 Extensometers Used in Metallic Material Tensile
Indonesia Standards, Extended testing machine
- SNI 05-2263-1991 Steel cord conveyor belts, Measurement of elongation on traction test
- SNI ISO 3376:2012 Leather - Physical and mechanical tests -Determination of tensile strength and percentage extension
- SNI 0449-2010 Clay and feldspar, Chemical test wet method
Korean Agency for Technology and Standards (KATS), Extended testing machine
- KS W ISO 8056-1-2003(2008) Aircraft－Nickel-chromium and nickel-aluminum thermocouple extension cables－Part 1 : Conductors－General requirements and tests
- KS W ISO 8056-2-2003(2008) Aircraft－Nickel-chromium and nickel-aluminium thermocouple extension cables－Part 2 : Terminations－General requirements and tests
- KS E 3144-1992 Shape and dimension of joint in extension rod for rock drill
- KS M 2254-2007(2022) Testing method for ductility of bituminous materials
- KS M 2254-1982 Testing method for ductility of bituminous materials
- KS M ISO 17074-2007(2022) Leather－Physical and mechanical tests－Determination of resistance to horizontal spread of flame
- KS M ISO 17074-2007(2017) Leather－Physical and mechanical tests－Determination of resistance to horizontal spread of flame
- KS M ISO 17236:2008 Leather－Physical and mchanical tests－Determination of extension set
- KS K 0311-2010 Test method for length of cotton fibers：Fibrograph method
- KS W 5031-1993 Elevated approach, runway threshold/wing bar/end light for airport
- KS F 2844-2002(2022) Test method for flame spread of building products
- KS M ISO 17074:2007 Leather－Physical and mechanical tests－Determination of resistance to horizontal spread of flame
- KS K 0520-1995 Testing method for breaking strength and elingation of woven cloth
- KS K 0510-2006 Test method for rayon filament yarn
- KS R 1014-2006(2011) Climbing long hill test method of automobiles
- KS R 1014-1986 Climbing long hill test method of automobiles
- KS K 0510-1981 Test method for rayon filament yarn
- KS W ISO 8056-3-2003(2008) Aircraft－Nickel-chromium and nickel-aluminium thermocouple extension cables－Part 3 : Crimp-type ring terminal ends－Dimensions
- KS F 2844-2002(2017) Test method for flame spread of building products
- KS C IEC 60068-2-10:2003 Basic environmental testing procedures－Part 2：Tests－Test J and guidance：Mould growth
- KS K 0412-2022 Test method for tensile strength and elongation of filament yarn
- KS K 0412-1985 Test method for tensile strength and elongation of filament yarn
- KS W ISO 8056-4-2003(2008) Aircraft－Nickel-chromium and nickel-aluminium thermocouple extension cables－Part 4 : Crimp-type butt connectors－Dimensions
- KS K ISO 15025:2021 Protective clothing — Protection against flame —Method of test for limited flame spread
- KS M 6695-2001 Testing method of crack growth using Demattia flex-cracking apparatus
- KS C IEC 60512-25-4:2004 Connectors for electronic equipment-Tests and measurements-Part 25-4:Test 25d-Propagation delay
- KS C IEC 60512-25-4-2004(2009) Connectors for electronic equipment－Tests and measurements－Part 25－4：Test 25d－Propagation delay
- KS C IEC 60512-25-4:2014 Connectors for electronic equipment-Tests and measurements-Part 25-4:Test 25d-Propagation delay
- KS B ISO 12108:2004 Metallic materials－Fatigue testing－Fatigue crack growth method
- KS K ISO 15025-2008(2017) Protective clothing－Protection against heat and flame－Method of test for limited flame spread
- KS K 0509-2011 Test method for spun rayon and blended spun rayon yarns
- KS K 0412-2016 Test method for tensile strength and elongation of filament yarn
- KS K 0412-2015 Test method for tensile strength and elongation of filament yarn
- KS K 0412-2016(2021) Test method for tensile strength and elongation of filament yarn
- KS K 0509-1986 Test method for spun rayon and blended spun rayon yarns
- KS K 0756-2012 Test method for non-woven fabrics made of filament yarn
- KS M ISO 15850:2007 Plastics－Determination of tension-tension fatigue crack propagation－Linear elastic fracture mechanics(LEFM) approach
- KS M ISO 15850:2017 Plastics－Determination of tension-tension fatigue crack propagation－Linear elastic fracture mechanics(LEFM) approach
- KS M ISO 3376:2004 Leather-Physical and mechanical tests-Determination of tensile strength and percentage extension
- KS M ISO 3376:2014 Leather — Physical and mechanical tests — Determination of tensile strength and percentage extension
- KS K 0310-2010 Testing method for length of cotton fibers:Diagram method
- KS K 0312-2012 Test method for length and length distribution of cotton fibers：Array method
- KS K 0215-2012 Test method for man-made filament yarns
- KS K 0312-1971 Test method for length and length distribution of cotton fibers：Array method
- KS K 0215-1982 Test method for man-made filament yarns
- KS K 0310-1985 Testing method for length of cotton fibers:Diagram method
- KS C IEC 60068-2-85:2022 Environmental testing — Part 2-85: Tests — Test Fj: Vibration — Long time history replication
- KS K 0435-2019 Test method for elastic recovery percentage of elongation of rayon filament yarn
- KS M ISO 283-1:2011 Textile conveyor belts－Full thickness tensile testing－Part 1：Determination of tensile strength, elongation at break and elongation at the reference load
- KS M ISO 283-1:2007 Textile conveyor belts－Full thickness tensile testing－Part 1：Determination of tensile strength, elongation at break and elongation at the reference load
- KS K 0352-2010 Test method for stretch properties of stretch woven fabrics
- KS B 5518-2002(2022) Extensometers used in metallic material tensile testing
- KS K 0440-2018 Test method for man-made filament yarns
- KS K 0215-2019 Test method for man-made filament yarns
American National Standards Institute （ANSI), Extended testing machine
American Society for Testing and Materials (ASTM), Extended testing machine
- ASTM D7342-20 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
- ASTM D7342-15 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
- ASTM D3773-07 Standard Test Methods for Length of Woven Fabric
- ASTM D3773/D3773M-10 Standard Test Methods for Length of Woven Fabric
- ASTM E796-94 Standard Test Method for Ductility Testing of Metallic Foil
- ASTM F1758-96e1 Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
- ASTM E290-14 Standard Test Methods for Bend Testing of Material for Ductility
- ASTM E796-94(2000) Standard Test Method for Ductility Testing of Metallic Foil
- ASTM D7054-04(2013) Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
- ASTM D7054-04(2019) Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
- ASTM D113-99 Standard Test Method for Ductility of Bituminous Materials
- ASTM D2211-00(2015) Standard Test Method for Elongation of Leather
- ASTM D2211-00(2005) Standard Test Method for Elongation of Leather
- ASTM D2211-00(2010) Standard Test Method for Elongation of Leather
- ASTM E190-21 Standard Test Method for Guided Bend Test for Ductility of Welds
- ASTM E290-13 Standard Test Methods for Bend Testing of Material for Ductility
- ASTM D113-17 Standard Test Method for Ductility of Asphalt Materials
- ASTM D113-07 Standard Test Method for Ductility of Bituminous Materials
- ASTM E290-97a(2004) Standard Test Methods for Bend Testing of Material for Ductility
- ASTM D522-93a(2008) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
- ASTM D4964-96 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D4964-96(2020) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D4964-96(2016) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM A721/A721M-02 Standard Test Method for Ductility of Oriented Electrical Steel
- ASTM D5344-99 Standard Test Method for Extension Force of Partially Oriented Yarn
- ASTM D5344-99(2005) Standard Test Method for Extension Force of Partially Oriented Yarn
- ASTM A721/A721M-02(2011) Standard Test Method for Ductility of Oriented Electrical Steel
- ASTM D5344-99(2011) Standard Test Method for Extension Force of Partially Oriented Yarn
- ASTM A721/A721M-02(2021) Standard Test Method for Ductility of Oriented Electrical Steel
- ASTM A721/A721M-02(2016) Standard Test Method for Ductility of Oriented Electrical Steel
- ASTM E2113-04 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM E2113-00 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM D2261-13(2017)e1 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
- ASTM D5103-95 Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)
- ASTM D5103-01 Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)
- ASTM D5103-07(2012) Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)
- ASTM E290-97a Standard Test Method for Bend Testing of Material for Ductility
- ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility
- ASTM A720-97 Standard Test Method for Ductility of Nonoriented Electrical Steel
- ASTM A721-97 Standard Test Method for Ductility of Oriented Electrical Steel
- ASTM A720/A720M-02 Standard Test Method for Ductility of Nonoriented Electrical Steel
- ASTM A720/A720M-02(2021) Standard Test Method for Ductility of Nonoriented Electrical Steel
- ASTM A720/A720M-02(2007) Standard Test Method for Ductility of Nonoriented Electrical Steel
- ASTM A720/A720M-02(2011) Standard Test Method for Ductility of Nonoriented Electrical Steel
- ASTM A720/A720M-02(2016)e1 Standard Test Method for Ductility of Nonoriented Electrical Steel
- ASTM E2113-18 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM E2113-13 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM E2113-23 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM D4964-96(2004) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D4964-96(2008)e2 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D4964-96(2012) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D4964-96(2012)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D7668-10 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel OilsIgnition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
- ASTM D2210-21 Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test
- ASTM D6536-00(2005) Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM D6535-05 Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM D6536/D6536M-00(2010)e1 Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM D6535/D6535M-05(2010)e1 Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM A721/A721M-02(2007) Standard Test Method for Ductility of Oriented Electrical Steel
- ASTM B490-09(2021) Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
- ASTM D5332-92 Standard Test Method for Fiber Length and Length Distribution of Cotton Fibers
- ASTM D5332-00 Standard Test Method for Fiber Length and Length Distribution of Cotton Fibers
- ASTM D3773-90(2002) Standard Test Methods for Length of Woven Fabric
- ASTM D2872-97 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
- ASTM E2768-11 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
- ASTM D5278-92 Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
- ASTM D5278-09 Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
- ASTM D1447-00 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement
- ASTM D4632-91(2003) Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
- ASTM E1321-09 Standard Test Method for Determining Material Ignition and Flame Spread Properties
- ASTM D2872-12 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
- ASTM D2872-04 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
- ASTM D2872-12e1 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
- ASTM C1901-21 Standard Test Method for Measuring Optical Retardation in Flat Architectural Glass
- ASTM C1901-21e1 Standard Test Method for Measuring Optical Retardation in Flat Architectural Glass
- ASTM D3759/D3759M-04 Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
- ASTM C1901-21e2 Standard Test Method for Measuring Optical Retardation in Flat Architectural Glass
- ASTM D6084/D6084M-13 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
- ASTM D5278/D5278M-09(2017) Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
- ASTM D5278/D5278M-09(2013) Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
CZ-CSN, Extended testing machine
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Extended testing machine
- GB/T 17737.108-2018 Coaxial communication cables—Part 1-108: Electrical test methods—Test for characteristic impedance, phase and group delay, electrical length and propagation velocity
- GB/T 17737.308-2018 Coaxial communication cables—Part 1-308: Mechanical test methods—Test for tensile strength and elongation for copper-clad metals
- GB/T 33820-2017 Metallic materials—Ductility testing—High speed compression test for porous and cellular metals
- GB/T 35524-2017 Chemicals—Lemna sp. growth inhibition test
YU-JUS, Extended testing machine
Canadian General Standards Board （CGSB), Extended testing machine
Aerospace Industries Association/ANSI Aerospace Standards, Extended testing machine
British Standards Institution (BSI), Extended testing machine
- BS EN IEC 62892:2019 Extended thermal cycling of PV modules. Test procedure
- BS 2G 215-2:1989+A1:2016 Aircraft. Nickel-chromium and nickel-aluminium thermocouple extension cables. Terminations. General requirements and tests
- BS ISO 13314:2012 Mechanical testing of metals. Ductility testing. Compression test for porous and cellular metals
- BS 2G 215-1:1985 Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft. Specification for conductors
- BS 4029:1978 Method of test for the determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-extension machines)
- BS EN ISO 283:2015 Textile conveyor belts. Full thickness tensile strength, elongation at break and elongation at the reference load. Test method
- BS EN ISO 283:2007 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
- BS EN 14326:2004 Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame
- BS EN 14326:2003 Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame
- BS EN ISO 17236:2003 Leather - Physical and mechanical tests - Determination of extension set
- BS EN ISO 17236:2016 Leather. Physical and mechanical tests. Determination of extension set
- BS EN 60068-2-10:2005 Environmental testing - Tests - Test J and guidance: Mould growth
- BS EN ISO 17074:2011 Leather. Physical and mechanical tests. Determination of resistance to horizontal spread of flame
- BS EN 60695-9-2:2014 Fire hazard testing. Surface spread of flame. Summary and relevance of test methods
- BS ISO 17340:2014 Metallic materials. Ductility testing. High speed compression test for porous and cellular metals
- BS EN 60512-25-4:2001 Connectors for electronic equipment. Test and measurements. Test 25d. Propagation delay
- BS ISO 12108:2012 Metallic materials. Fatigue testing. Fatigue crack growth method
- BS EN ISO 3376:2011 Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension
- BS EN 60793-1-49:2003 Optical fibres - Measurement methods and test procedures - Differential mode delay
- BS ISO 23949:2023 Plastics. Application of spread of flame test to plastic pipes
- BS ISO 13314:2011 Mechanical testing of metals. Ductility testing. Compression test for porous and cellular metals
- BS 3900-G6:1989 Methods of test for paints - Assessment of resistance to fungal growth
- BS EN ISO 3691-2:2016 Industrial trucks. Safety requirements and verification. Self-propelled variable-reach trucks
- BS EN ISO 3691-6:2015 Industrial trucks. Safety requirements and verification. Self-propelled variable-reach trucks
- BS EN 60512-11-5:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11e - Mould growth
- BS EN 13880-13:2018 Tracked Changes. Hot applied joint sealants. Test method for the determination of the discontinuous extension (adherence test)
- BS EN ISO 15025:2002 Protective clothing. Protection against heat and flame. Method of test for limited flame spread
- BS EN 60793-1-49:2006 Optical fibres - Measurement methods and test procedures - Differential mode delay
- BS EN 60811-505:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Elongation at low temperature for insulations and sheaths
German Institute for Standardization, Extended testing machine
- DIN 50437:1979 Testing of semi-conductive inorganic materials; measuring the thickness of silicon epitaxial layer thickness by infrared interference method
- DIN EN ISO 3262-4:2022-10 Extenders - Specifications and methods of test - Part 4: Whiting (ISO/DIS 3262-4:2022); German and English version prEN ISO 3262-4:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-4 (1998-09).
- DIN 7424:2013-10 Socket wrenches with hexagon drive extension for hexagon bolts, machine operated
- DIN EN ISO 3262-13:2022-10 Extenders - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO/DIS 3262-13:2022); German and English version prEN ISO 3262-13:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-13 (1998-08).
- DIN EN ISO 17236:2003 Leather - Physical and mechanical tests - Determination of extension set (ISO 17236:2002); German version EN ISO 17236:2002
- DIN EN 50289-3-2:2002 Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods; Tensile strength and elongation for conductor; German version EN 50289-3-2:2001
- DIN EN ISO 17236:2016-07 Leather - Physical and mechanical tests - Determination of extension set (ISO 17236:2016); German version EN ISO 17236:2016
- DIN EN ISO 3376:2003 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2002); German version EN ISO 3376:2002
- DIN EN ISO 3376:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011); German version EN ISO 3376:2011
- DIN EN 60512-25-4:2002 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d: Propagation delay (IEC 60512-25-4:2001); German version EN 60512-25-4:2001
- DIN EN ISO 3262-4:2023-09 Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2023); German version EN ISO 3262-4:2023
- DIN EN 13880-13:2018 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
- DIN 53829-1:2014-12 Testing of textiles - Determination of the evenness of filament yarns - Part 1: Testing of the force and extension on the running yarn, principles
- DIN EN 16842-7:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 7: Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer
European Association of Aerospace Industries, Extended testing machine
- AECMA PREN 3095-1997 Aerospace Series Test Method for Sealants Determination of Extended Assembly Time
- AECMA PREN 3095-1998 Aerospace Series Sealants Test Method Determination of Extended Assembly Time Edition P 1
Aerospace, Security and Defence Industries Association of Europe (ASD), Extended testing machine
GM North America, Extended testing machine
Professional Standard - Traffic, Extended testing machine
National Metrological Verification Regulations of the People's Republic of China, Extended testing machine
Japanese Industrial Standards Committee (JISC), Extended testing machine
- JIS B 7738:2020 Calibration and verification of helical compression and extension springs testing machines
- JIS L 1906:2000 Test methods for non-woven fabrics made of filament yarn
- JIS L 1013:1992 Testing methods for man-made filament yarns
- JIS L 1013:1999 Testing methods for man-made filament yarns
- JIS K 6557-2:2016 Leather -- Physical and mechanical tests -- Determination of tensile strength and percentage extension
- JIS C 6187:1999 Test methods of optical wavelengthmeters
- JIS C 60695-9-1:2002 Environmental testing -- Electrotechnical products -- Fire hazard testing -- Surface spread of flame -- General guidance
- JIS L 1013:2010 Testing methods for man-made filament yarns
- JIS L 1013:2021 Testing methods for man-made filament yarns
- JIS C 6864:2008 Measurement methods and test procedures -- Differential mode delay of multimode optical fibers
- JIS T 8022:2006 Protective clothing -- Protection against heat and flame -- Method of test for limited flame spread
- JIS D 1018:1982 Long hill climbing test method of automobiles
- JIS B 7741:1991 Extensometers used in metallic material tensile testing
Danish Standards Foundation, Extended testing machine
- DS/EN ISO 17236:2003 Leather - Physical and mechanical tests - Determination of extension set
- DS/INSTA 413:1986 Fire tests. Roofings. Fire spread
- DS/EN ISO 17074:2011 Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame
- DS/ISO 5658-4:2001 Reaction to fire tests - Spread of flame - Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
- DS/INSTA 414:1986 Fire tests. Floorings. Fire spread and smoke generation
- DS 917:1959 Textile testing. Determination of breaking load and elongation at break of woven fabric. Tensile test
- DS/EN ISO 3376:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
- DS/EN 13880-13:2004 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
- DS/ISO 5658-2/Amd 1:2012 Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building and transport products in vertical configuration
- DS/ISO 5658-2:2006 Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building and transport products in vertical configuration
International Organization for Standardization (ISO), Extended testing machine
- ISO 13314:2011 Mechanical testing of metals - Ductility testing - Compression test for porous and cellular metals
- ISO 17236:2002 | IULTCS/IUP 43 Leather — Physical and mechanical tests — Determination of extension set
- ISO 17236:2016 | IULTCS/IUP 43 Leather — Physical and mechanical tests — Determination of extension set
- ISO 283:2007 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
- ISO 283:2015 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
- ISO 17074:2006 | IULTCS/IUP 47 Leather — Physical and mechanical tests — Determination of resistance to horizontal spread of flame
- ISO 17236:2002 Leather - Physical and mechanical tests - Determination of extension set
- ISO 17236:2016 Leather - Physical and mechanical tests - Determination of extension set
- ISO 17074:2006 Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame
- ISO 132:2011 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)
- ISO 23949:2023 Plastics — Application of spread of flame test to plastic pipes
- ISO/TS 22269:2005 Reaction to fire tests - Fire growth - Full-scale test for stairs and stair coverings
- ISO 17340:2014 Metallic materials - Ductility testing - High speed compression test for porous and cellular metals
- ISO 15025:2016 Protective clothing - Protection against flame - Method of test for limited flame spread
- ISO 12108:2012 Metallic materials - Fatigue testing - Fatigue crack growth method
- ISO 12108:2002 Metallic materials - Fatigue testing - Fatigue crack growth method
- ISO 12108:2018 Metallic materials - Fatigue testing - Fatigue crack growth method
- ISO 3376:2020 | IULTCS/IUP 6 Leather — Physical and mechanical tests — Determination of tensile strength and percentage elongation
- ISO 3376:2002 | IULTCS/IUP 6 Leather — Physical and mechanical tests — Determination of tensile strength and percentage extension
- ISO 3376:2011 | IULTCS/IUP 6 Leather — Physical and mechanical tests — Determination of tensile strength and percentage extension
- ISO 15850:2002 Plastics - Determination of tension-tension fatigue crack propagation - Linear elastic fracture mechanics (LEFM) approach
- ISO 3376:2002 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
- ISO 3376:2011 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
Association Francaise de Normalisation, Extended testing machine
- NF P92-504:1995 Safety against fire. Building materials. Reaction to fire tests. Flame persistance test and speed of the spread of flame.
- NF G52-034:2003 Leather - Physical and mechanical tests - Determination of extension set.
- NF G52-034*NF EN ISO 17236:2016 Leather - Physical and mechanical tests - Determination of extension set
- NF L52-250-502*NF EN 3475-502:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502 : notch propagation
- NF C20-710:1989 Environmental testing. Test methods. Test J and guidance : mould growth.
- NF C20-710*NF EN 60068-2-10:2005 Environmental Testing - Part 2-10 : tests - Test J and Guidance : mould growth
- NF A03-657:1987 Iron and steel products. Steel cold ductility determination. Compression test.
- NF EN 60811-507:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 507 : essais mécaniques - Essai d'allongement à chaud pour les matériaux réticulés
- NF G52-002*NF EN ISO 3376:2020 Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation
- NF EN ISO 3376:2020 Cuir - Essais physiques et mécaniques - Détermination de la résistance à la traction et du pourcentage d'allongement
- NF C93-400-25-4*NF EN 60512-25-4:2002 Connectors for electronic equipment - Tests and measurements - Part 25-4 : test 25d - Propagation delay
- NF C20-924-9-2*NF EN 60695-9-2:2014 Fire hazard testing - Part 9-2 : Surface spread of flame - Summary and relevance of test methods
- NF EN 60811-505:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 505 : essais mécaniques - Essai d'allongement à basse température pour les enveloppes isolantes et les gaines
- NF P98-880-13*NF EN 13880-13:2018 Hot applied joint sealants - Part 13 : Test method for the determination of the discontinuous extension (adherence test)
- NF G52-002:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension.
Group Standards of the People's Republic of China, Extended testing machine
- T/JSREA 02-2022 Detailed Rules for Evaluation Method of Extended Service Life of Wind Turbines
- T/JSREA 01-2022 Technical Guidelines for Assessment of Wind Turbine Extended Service Life
- T/SJZJLXH 0008-2020 Calibration specification for rebar laser length measuring and weighing testing machine
- T/CSCP 0026-2017 Seawater Long Length Corrosion Test
- T/CSTM 00044.5-2018 Aqueous environment corrosion test— Part 5: Long-scale corrosion tests in seawater
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Extended testing machine
- PREN 3095-1997 Aerospace Series Test Method for Sealants Determination of Extended Assembly Time
- PREN 3095-1998 Aerospace Series Sealants Test Method Determination of Extended Assembly Time (Edition P 1)
VN-TCVN, Extended testing machine
- TCVN 7496-2005 Bitumen.Test method for ductility
- TCVN 6631-2000 Non-electric milisecond delay detonator.Test methods
- TCVN 7121-2014 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
- TCVN 7699-2-10-2007 Environmental testing.Part 2-10: Tests.Test J and guidance: Mould growth
- TCVN 4180-2009 Standard test method for length and length distribution of cotton fibers (array method)
- TCVN 7121-2007 Leather.Physical and mechanical tests.Determination of tensile strength and percentage extension
- TCVN 4182-2009 Standard test method for breaking strength and elongation of cotton fibers (flat bundle method)
SE-SIS, Extended testing machine
- SIS SS 02 48 24-1987 Fire tests - Roofings - Fire spread
- SIS SS 18 41 77-1986 Paint and varnishes - Cupping test
- SIS SS 02 48 25-1987 Fire tests - Floorings - Fire spread and smoke generation
- SIS SS 63 63 55-1993 Telecommunications equipment — Private Branch Exchanges (PBXs) — Digital PBX interface with leased 4-wire analogue extension line
- SIS SS-ISO 8056-2:1990 Aircraft — Nickel-chromium and nickel- aluminium thermocouple extension cables — Part 2: Terminations — General requirements and tests
- SIS SS-ISO 8056/1:1986 Aircraft - Nickel-chromium and nickel- aluminium thermocouple extension cables - Part 1: Conductors - General requirements and tests
FMVSS - Federal Motor Vehicle Safety Standards, Extended testing machine
- 49 CFR 571 83 FR 59353-2018 Pilot Program for Collaborative Research on Motor Vehicles With High or Full Driving Automation; Extension of Comment Period
Underwriters Laboratories (UL), Extended testing machine
- UL SUBJECT 4143-2016 Outline of Investigation for Wind Turbine Generator – Life Time Extension (LTE) (Issue 1)
- UL 4143-2018 UL Standard for Safety Wind Turbine Generator - Life Time Extension (LTE) (First Edition)
- UL 214-1997 Tests for flame-propagation of fabrics and films
- UL 4143 BULLETIN-2016 UL Standard for Safety Wind Turbine Generator- Life Time Extension (LTE) (COMMENTS DUE: December 7@ 2016)
- UL 4143 BULLETIN-2017 UL Standard for Safety Wind Turbine Generator- Life Time Extension (LTE) (COMMENTS DUE: July 17@ 2017)
IT-UNI, Extended testing machine
Professional Standard - Construction Industry, Extended testing machine
Professional Standard - Ferrous Metallurgy, Extended testing machine
工业和信息化部, Extended testing machine
- YB/T 5289-2017 Electrode paste elongation test method
- HG/T 4194-2021 Test methods for tire valve extension tubes
- QB/T 2710-2018 Physical and mechanical testing of leather Determination of tensile strength and elongation
- HG/T 4991-2016 Test method for elongation of paint film on rubber shoes
Professional Standard - Aviation, Extended testing machine
- HB 8642-2022 Flammability and flame propagation test method for acoustic/thermal insulation materials installed in the fuselage for civil aircraft
- HB 7574-1997 Test method for long-term water absorption of aviation plexiglass
- HB 7592-1998 Test method for reliability growth of aircraft non-electronic systems
- HB/Z 214.3-1992 Aviation Product Reliability Growth Test
Lithuanian Standards Office , Extended testing machine
- LST EN ISO 17236:2003 Leather - Physical and mechanical tests - Determination of extension set (ISO 17236:2002)
- LST EN ISO 3376:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011)
- LST EN 13880-13-2004 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
Professional Standard - Petrochemical Industry, Extended testing machine
European Committee for Standardization (CEN), Extended testing machine
- EN ISO 3262-4:2023 Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)
- EN ISO 3262-13:2023 Extenders - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:2023)
- EN 14326:2003 Leather Physical and mechanical tests Determination of resistance to horizontal spread of flame
- EN 3475-502:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation
- EN 13522:2001 Footwear - Test methods for uppers - Tensile strength and elongation
- EN ISO 3376:2020 Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation (ISO 3376:2020)
- EN ISO 3376:2011 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011)
- HD 323.2.10 S3-1988 Basic environmental testing procedures; part 2: tests; test J and guidance: mould growth
- EN ISO 3376:2002 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension ISO 3376:2002
- CWA 17793-2021 Test method for determination of the essential work of fracture of thin ductile metallic sheets
- CWA 17793:2021 Test method for determination of the essential work of fracture of thin ductile metallic sheets
Association of German Mechanical Engineers, Extended testing machine
AASHTO - American Association of State Highway and Transportation Officials, Extended testing machine
- T 300-2000 Standard Method of Test for Force Ductility Test of Asphalt Materials
- T 300-2011 Standard Method of Test for Force Ductility Test of Asphalt Materials
- T300-1995 Standard Method of Test for Force Ductility Test of Bituminous Materials (Nineteenth Edition)
- T300-1994 Standard Method of Test for Force Ductility Test of Bituminous Materials (Eighteenth Edition)
- T300-2000 Standard Method of Test for Force Ductility Test of Bituminous Materials (Twentieth Edition)
- T 301-2013 Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
- T 301-2011 Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
- T 301-2008 Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
- T 51-2000 Standard Method of Test for Ductility of Bituminous Materials (Twentieth Edition)
- T 301-1995 Standard Method of Test for Elastic Recovery Test of Bituminous Materials by Means of a Ductilometer (Nineteenth Edition)
Military Standard of the People's Republic of China-General Armament Department, Extended testing machine
- GJB 165.3-1986 Fuze laboratory test Fuze delay tube ignition capability test
- GJB 1407-1992 reliability growth test
- GJB 165.3A-2004 Fuze Laboratory Test Part 3: Fuze Delay Barrel Ignition Capability Test
- GJB 165.3A-2019 Fuze Laboratory Test Part 3: Fuze Delay Barrel Ignition Capability Test
AT-ON, Extended testing machine
- ONORM M 6794-4-1997 Pinion-type cutters for cylindrical gears - Straight teeth extended hub-gear cutters
- ONORM S 7024-1985 Testing of leather: tear growth test Essai de cuir; essai de d?chirement
HU-MSZT, Extended testing machine
RU-GOST R, Extended testing machine
- GOST IEC 60811-507-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 507. Mechanical tests. Hot set test for cross-linked materials
- GOST 28515-1997 Copper. Method of test for sample spiral elongation
- GOST 28515-1990 High purity copper. Spiral elongation test method
- GOST R ISO 17074-2015 Leather. Physical and mechanical tests. Method for determination of resistance to horizontal spread of flame
- GOST 32627-2014 Testing of chemicals of environmental hazard. Terrestrial plant test: vegetative vigour test
- GOST 33061-2014 Testing of chemicals of environmental hazard. Terrestrial plant test: seedling emergence and seedling growth test
- GOST 32426-2013 Testing of chemicals of environmental hazard. Lemna spp. growth inhibition test
BE-NBN, Extended testing machine
- NBN-EN 10234-1994 Metallic materials. Tube. Drift expanding test
- NBN-EN 532-1995 Protective clothing - Protection against heat and flame - Test method for limited flame spread
- NBN X 07-001-1987 Classification and càlibration of material testing machines -Machines for compression, bending and tensile tests
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Extended testing machine
Professional Standard - Chemical Industry, Extended testing machine
国家市场监督管理总局、中国国家标准化管理委员会, Extended testing machine
- GB/T 39372-2020 Leather—Physical and mechanical tests—Determination of percentage extension
- GB/T 5095.2504-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-4: Test 25d: Propagation delay
- GB/T 32065.9-2019 Environmental test methods for oceanographic instruments—Part 9:Mould test
Society of Automotive Engineers (SAE), Extended testing machine
- SAE MA3341-1987 Bolt, Machine-Spline Extended Washer, Full Shank, Long Thread, AMS 5731 Metric FSC 5306
- SAE MA3342-1987 Bolt, Machine-Spline Extended Washer, Full Shank, Drilled, Long Thread, AMS5731, Metric FSC 5306
- SAE AIR6334-2020 A Guide to Extending Times Between Overhaul for Rotorcraft Power Train Transmissions Using Monitoring Data
- SAE AIR4918-2013 Industry Practices and Guidelines for the Selection of Coiled Tubes, Flexible Hoses, Swivels, and Extension Fittings for Aircraft Fluid Systems
- SAE AS5706-2007 Test Plan/Procedure for AS5643/1 S400 Copper Media Interface Characteristics Over Extended Distances
BR-ABNT, Extended testing machine
Professional Standard - Aerospace, Extended testing machine
Professional Standard - Textile, Extended testing machine
ICEA - Insulated Cable Engineers Association Inc., Extended testing machine
- T-22-294-1983 Test Procedures for Extended Time-Testing of Wire and Cable Insulations for Service in Wet Locations
- T-22-294-2016-2016 TEST PROCEDURES FOR EXTENDED TIME-TESTING OF WIRE AND CABLE INSULATIONS FOR SERVICE IN WET LOCATIONS
Insulated Cable Engineers Association （ICEA), Extended testing machine
- ICEA T-22-294-1983 Test Procedures for Extended Time-Testing of Wire and Cable Insulations for Service in Wet Locations
- ICEA T-22-294-2016 TEST PROCEDURES FOR EXTENDED TIME-TESTING OF WIRE AND CABLE INSULATIONS FOR SERVICE IN WET LOCATIONS
ES-AENOR, Extended testing machine
TH-TISI, Extended testing machine
- TIS 1202-1993 Standard test method for ductility of bituminous meterials
The American Road & Transportation Builders Association, Extended testing machine
- AASHTO T 51-2008 Standard Method of Test for Ductility of Bituminous Materials
- AASHTO T 301-2011 Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
- AASHTO T 301-2013 Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
- AASHTO T300-2000 Standard Method of Test for Force Ductility Test of Bituminous Materials Twentieth Edition
- AASHTO T51-2000 Standard Method of Test for Ductility of Bituminous Materials Twentieth Edition R(1998)
Professional Standard - Railway, Extended testing machine
- TB/T 2639.3-1995 Test method for fire resistance of materials used in railway vehicles Flame spread
GB-REG, Extended testing machine
- REG NASA-LLIS-0482-1996 Lessons Learned - Test Delays Due to Late Set-up of Instrument Ground Support Equipment (GSE)
AENOR, Extended testing machine
- UNE-EN ISO 3376:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011)
- UNE-EN 13880-13:2004 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
ES-UNE, Extended testing machine
- UNE-EN ISO 17236:2016 Leather - Physical and mechanical tests - Determination of extension set (ISO 17236:2016)
US-Unspecified Preparing Activity, Extended testing machine
PL-PKN, Extended testing machine
- PN P06748-1990 Man-made filament yarns Acceptance tests
- PN M55672-1958 Machine tools -- Milling machines for long screw thread -- Testing of accuracy
TR-TSE, Extended testing machine
- TS 281-1965 BEND TESTS ON FUSION VVELDED BUTT JOINTS AND FREE BEND TEST FOR DUCTILITY OF WELDS
European Committee for Electrotechnical Standardization（CENELEC）, Extended testing machine
- HD 323.2.10 S2-1987 Basic Environmental Testing Procedures - Part 2: Tests. Test J: Mould Growth
KR-KS, Extended testing machine
- KS K ISO 15025-2021 Protective clothing — Protection against flame —Method of test for limited flame spread
- KS K 0312-2017(2022) Test method for length and length distribution of cotton fibers：Array method
- KS C IEC 60068-2-85-2022 Environmental testing — Part 2-85: Tests — Test Fj: Vibration — Long time history replication
- KS M ISO 283-1-2007 Textile conveyor belts－Full thickness tensile testing－Part 1：Determination of tensile strength, elongation at break and elongation at the reference load
PT-IPQ, Extended testing machine
- NP 2827-2.35-1991 Basic environmental testing procedures Part 2: Tests Test Fdc: Random vibration wide band. Reproductibility high
- NP 2827-2.36-1991 Basic environmental testing procedures Part 2: Tests Test Fdc: Random vibration wide band. Reproductibility médium
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Extended testing machine
- GJB 5389.27-2005 Test method of gun-launched missile Part 27:Long time storage test
- GJB 5895.26-2006 Test method for anti-tank missile Part 26: Long period storage test
- GJB 5383.7-2005 Test methods of sensitivity and stability for pyrotechnic. Part 7: Test for explosion. 300second delay time mehtod
- GJB 5472.13-2005 Test method of semi-combustible cartridge case Part 13:Prolonged storage monitoring test
Professional Standard - Ocean, Extended testing machine
- HY 016.10-1992 Basic environmental test methods for marine instruments mold growth test
- HY 21.5-1992 The basic method of environmental test for oceanographic instruments - Guideline for mould test
Professional Standard - Light Industry, Extended testing machine
- QB/T 2710-2005 Leather-Physical and mechanical tests-Determination of tensile strength and percentage extension
- QB/T 1269-2012 Fur.Physical and mechanical tests.Determination of tensile strength and percentage extension
- QB/T 4299-2012 Testing method of relative tolerance of sewing machine.forward and backward stitch length
Guangdong Provincial Standard of the People's Republic of China, Extended testing machine
Professional Standard - Electron, Extended testing machine
- SJ/Z 9001.13-1987 Basic environmental testing procedures--Part 2: Tests--Test J: Mould growth
CH-SNV, Extended testing machine
Xinjiang Provincial Standard of the People's Republic of China, Extended testing machine
Sichuan Provincial Standard of the People's Republic of China, Extended testing machine
ZA-SANS, Extended testing machine
- SANS 5502:1980 Burning and flame propagation tests on cable dielectric and outer coverings
Professional Standard - Civil Aviation, Extended testing machine
- MH/T 6042-2006 Test methhod to determine the flammability and flame propagation characteristics of thermal/acoustic insulation materials
CEN - European Committee for Standardization, Extended testing machine
- EN 16842-7:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 7: Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer