ZH
RU
ES
How to measure with a microscope
How to measure with a microscope, Total:107 items.
In the international standard classification, How to measure with a microscope involves: Linear and angular measurements, Mechanical testing, Analytical chemistry, Optical equipment, Materials for aerospace construction, Electrical wires and cables, Fluid power systems, Testing of metals, Air quality, Physics. Chemistry, Paints and varnishes, Raw materials for rubber and plastics, Surface treatment and coating, Lubricants, industrial oils and related products, Microbiology, Petroleum products in general, Construction materials, Corrosion of metals, Test conditions and procedures in general.
Association of German Mechanical Engineers, How to measure with a microscope
- VDI/VDE 2656 Blatt 1-2008 Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems
International Organization for Standardization (ISO), How to measure with a microscope
- ISO 11952:2014 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems
- ISO/TS 21383:2021 Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
- ISO 11952:2019 Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
- ISO 19056-1:2015 Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy
- ISO 22262-2:2014 Air quality - Bulk materials - Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
- ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
- ISO/WD TR 23683:2023 Surface chemical analysis — scanning probe microscopy — Guideline for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy
- ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
- ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
- ISO 8672:1993 Air quality; determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy; membrane filter method
- ISO 8672:2014 Air quality - Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy - Membrane filter method
CZ-CSN, How to measure with a microscope
- CSN 65 6337-1974 Determination of mechanical impurities content using a microscope
Professional Standard - Machinery, How to measure with a microscope
British Standards Institution (BSI), How to measure with a microscope
- BS ISO 11952:2019 Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
- BS ISO 19056-3:2022 Microscopes. Definition and measurement of illumination properties - Incident light fluorescence microscopy with incoherent light sources
- BS ISO 19056-1:2015 Microscopes. Definition and measurement of illumination properties. Image brightness and uniformity in bright field microscopy
- 21/30395346 DC BS ISO 19056-3. Microscopes. Definition and measurement of illumination properties. Part 3. Incident light fluorescence microscopy with incoherent light sources
- BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
- BS ISO 22262-2:2014 Air quality. Bulk materials. Quantitative determination of asbestos by gravimetric and microscopical methods
- 19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
- BS IEC 62629-12-2:2019 3D display devices - Measuring methods for stereoscopic displays using glasses. Motion blur
- BS ISO 19749:2021 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- BS ISO 8672:2014 Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method
- DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
HU-MSZT, How to measure with a microscope
TIA - Telecommunications Industry Association, How to measure with a microscope
- TIA/EIA-455-45-B-1992 FOTP-45 Method for Measuring Optical Fiber Geometry Using a Laboratory Microscope (Withdrawn May@ 2003)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure with a microscope
- GB/T 42659-2023 Surface Chemical Analysis Scanning Probe Microscopy Determination of Geometric Quantities Using Scanning Probe Microscopy: Measurement System Calibration
- GB/T 27760-2011 Test method for calibrating the z-magnification of an atomic force microscope at subnanometer displacement levels using Si(111) monatomic steps
American Society for Testing and Materials (ASTM), How to measure with a microscope
- ASTM E2859-11(2017) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
- ASTM E285-08(2015) Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
- ASTM F728-81(1997)e1 Standard Practice for Preparing An Optical Microscope for Dimensional Measurements
- ASTM F72-95(2001) Standard Specification for Gold Wire for Semiconductor Lead Bonding
- ASTM E3060-16 Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy
- ASTM E2859-11(2023) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
- ASTM E2859-11 Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
- ASTM D3849-14a Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy
- ASTM B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM B748-90(1997) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM D5235-18 Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
- ASTM B748-90(2021) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM B651-83(2019) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
- ASTM E3060-23 Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy
- ASTM B748-90(2016) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM D5770-02 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
- ASTM D5770-96 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
- ASTM D5770-02(2007) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
- ASTM F3294-18 Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
- ASTM C1356-96(2001) Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
- ASTM F1438-93(2012) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
- ASTM B651-83(2001) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
- ASTM B651-83(1995) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
- ASTM B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
- ASTM B651-83(2015) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
- ASTM C1356-07 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
- ASTM C1356-07(2012) Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
- ASTM E280-98(2004)e1 Standard Reference Radiographs for Heavy-Walled (4 &189; to 12-in. [114 to 305-mm]) Steel Castings
- ASTM E280-21 Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
- ASTM E2809-22 Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
- ASTM B588-88(2001) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
Korean Agency for Technology and Standards (KATS), How to measure with a microscope
- KS I ISO 4407:2012 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope
- KS M ISO 12137-1-2003(2008) Paints and varnishes－Determination of mar resistance－Part 1：Method using a curved stylus
- KS C IEC 62629-12-1:2022 3D Display Devices — Part 12-1: Measuring methods for stereoscopic displays using glasses — Optical
- KS I ISO 8672:2006 Air quality－Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy(Membrane filter method)
- KS I ISO 8672:2021 Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy —Membrane filter method
- KS I ISO 8672-2006(2017) Air quality－Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy(Membrane filter method)
- KS D 0204-2007(2022) Steel－Determination of content of nonmetallic inclusions－Micrographic method using standard diagrams
- KS D 0204-2002 Steel－Determination of content of nonmetallic inclusions－Micrographic method using standard diagrams
- KS D 0204-2007(2017) Steel－Determination of content of nonmetallic inclusions－Micrographic method using standard diagrams
German Institute for Standardization, How to measure with a microscope
- DIN SPEC 52407:2015-03 Nanotechnologies - Methods for preparation and assessment for particle measurements with atomic force microscopy (AFM) and transmission scanning electron microscopy (TSEM)
- DIN 58959-4:1997-06 Quality management in medical microbiology - Part 4: Requirements for investigations using light microscopes / Note: To be replaced by DIN 58959-6 Beiblatt 2 (2021-08, t).
IT-UNI, How to measure with a microscope
- UNI 7329-1974 Examination with electron microscope of metallic materials by the replica technique. Preparation of replicas for microstructure examination.
- UNI 6500-1969
RO-ASRO, How to measure with a microscope
- STAS 10552-1976 DETERMINATION OF THE DELTA-FERRITE CONTENT IN THE DEPOSITED METAL BY WELDING OF AUSTENITICAL STEELS Microscopic method
- SR ISO 4407:1991 Hydraulic fluid power -Fluid contamination - Determinatidn of particulate contamination by the counting method using a microscope
未注明发布机构, How to measure with a microscope
- DIN EN ISO 21363:2022 Nanotechnologies – measurements of particle size and particle shape distributions using transmission electron microscopy
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to measure with a microscope
- GB/T 34879-2017 Geometrical product specifications (GPS)—Metrological characteristics and guide to uncertainty of measurement for optical confocal microscopes
PL-PKN, How to measure with a microscope
- PN C05551-1987 Water and waste water Determination of the phytoplankton ?uantity by using the inverted microscope
- PN Z04097 Arkusz 01-1974 Air purity protection Tests for the size composition of dust Measurement of quantitative distribution of projective dust particie size ^2 (im with micros- cope without using of immersion li?uid
Association Francaise de Normalisation, How to measure with a microscope
- NF X43-066-2*NF ISO 22262-2:2014 Air quality - Bulk materials - Part 2 : quantitative determination of asbestos by gravimetric and microscopical methods
- NF X43-050:2021 Air quality - Determination of the asbestos fiber concentration by transmission electron microscopy - Indirect method
- NF X43-050:1996 Air quality. Determination of the asbestos fiber concentration by transmission electron microscopy. Indirect method.
- NF ISO 22262-2:2014 Qualité de l'air - Matériaux solides - Partie 2 : dosage quantitatif de l'amiante en utilisant les méthodes gravimétrique et microscopique
- FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
PH-BPS, How to measure with a microscope
- PNS ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
BE-NBN, How to measure with a microscope
- NBN EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning électron microscope method (ISO 9220:1988)
RU-GOST R, How to measure with a microscope
- GOST ISO 4407-2006 Industrial cleanliness. Determination of fluid contamination by the counting method using an optical microscope
- GOST 32333-2013 Petroleum products. Determination of acid number by semi-micro color indicator titration
- GOST R 8.697-2010 State system for ensuring the uniformity of measurements. Interpenar spacings in crystals. Method for measurement by means of a transmission electron microscope
- GOST R ISO 4967-2009 Steel. Determination of content of nonmetallic inclusions. Micrographic method using standard diagrams
- GOST R 8.700-2010 State system for ensuring the uniformity of measurements. Method of surface roughness effective height measurements by means of scanning probe atomic force microscope
European Committee for Standardization (CEN), How to measure with a microscope
- EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
KR-KS, How to measure with a microscope
- KS C ISO 19749-2023 Nanotechnologies — Measurements of particle size and shape distributions by scanning electron microscopy
- KS C ISO 21363-2023 Nanotechnologies — Measurements of particle size and shape distributions by transmission electron microscopy
- KS C IEC 62629-12-1-2022 3D Display Devices — Part 12-1: Measuring methods for stereoscopic displays using glasses — Optical
- KS I ISO 8672-2021 Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy —Membrane filter method
CU-NC, How to measure with a microscope
- NC 90-01-50-1987 Metrological Assurance. Instrumentation Microscopes Methods and Means of Verification
VN-TCVN, How to measure with a microscope
- TCVN 6504-1999 Air quality.Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy.Membrane filter method
Canadian General Standards Board （CGSB), How to measure with a microscope
CH-SNV, How to measure with a microscope
BELST, How to measure with a microscope
- STB 2210-2011 Nano-sized carbon and non-carbon materials and composites based on them. Method for determining parameters using scan electron microscopy measurements
- STB 2209-2011 Nano-sized carbon and non-carbon materials and composites based on them. The technique for determining elemental composition using scan electron microscopy measurements
Danish Standards Foundation, How to measure with a microscope
- DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
GOSTR, How to measure with a microscope
- PNST 507-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by using transmission electron microscopy and energy dispersive X-ray spectrometry
ESDU - Engineering Sciences Data Unit, How to measure with a microscope
- SPB-M6-2-2010 Apr.08: Colloidal Interactions Between Asphaltene and Different Surfaces Measured by Atomic force microscopy (AFM)