ZH
RU
ES
how to quantify
how to quantify, Total:498 items.
In the international standard classification, how to quantify involves: Road engineering, Bottles. Pots. Jars, On-board equipment and instruments, Radiation measurements, Microbiology, Analytical chemistry, Leather technology, Paper and board, Measurement of volume, mass, density, viscosity, Acoustics and acoustic measurements, Test conditions and procedures in general, Rubber, General methods of tests and analysis for food products, Air quality, Milk and milk products, Edible oils and fats. Oilseeds, Measurement of fluid flow, Products of the textile industry, Fertilizers, Crude petroleum, Jewellery, Meat, meat products and other animal produce, Linear and angular measurements, Mechanical testing, Powder metallurgy, Animal feeding stuffs, Road vehicles in general, Petroleum products in general, Radiation protection, Quality, Pharmaceutics, Water quality, Soil quality. Pedology, Fluid power systems, Ceramics, Tobacco, tobacco products and related equipment, Raw materials for rubber and plastics, Plastics, Shipbuilding and marine structures in general, Non-destructive testing, Pulps, Particle size analysis. Sieving, Surface treatment and coating, Gears, Vacuum technology, Textile fibres, Optics and optical measurements, Non-ferrous metals, Protection of and in buildings, Wastes, Paint ingredients, Corrosion of metals, Waxes, bituminous materials and other petroleum products, Elements of buildings, Protection against fire, Electrical wires and cables, Testing of metals, Cereals, pulses and derived products, Medical equipment, Products of the chemical industry, Refractories, FOOD TECHNOLOGY, Vibrations, shock and vibration measurements, Construction materials, Geology. Meteorology. Hydrology, Small craft, Beverages, Metrology and measurement in general, Inorganic chemicals, Fuels, Road vehicle systems, Electromagnetic compatibility (EMC).
US-CFR-file, how to quantify
- CFR 20-418.1350-2013 Employees' benefits. Part418:Medicare subsidies. Section418.1350:What are the rules for review of a reconsidered determination or an administrative law judge decision?
- CFR 16-1112.35-2013 Commercial Practices. Part1112:Requirements pertaining to third party conformity assessment bodies. Section1112.35:When must an audit be conducted?
- CFR 12-217.173-2014 Banks and banking. Part 217:Capital adequacy of bank holding companies, savings and loan holding companies, and state member banks (regulation Q). Subpart E:Risk-weighted assets—internal ratings-based and advanced measurement approaches. Section217.173:Di
American Society for Testing and Materials (ASTM), how to quantify
- ASTM E1927-98 Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
- ASTM E1927-98(2003) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
- ASTM E1927-98(2007) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
- ASTM E1927-98(2018) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
- ASTM E147-61(1996) Standard Specification for Apparatus For Microdetermination Of Nitrogen By Kjeldahl Method
- ASTM E147-61(2001) Standard Specification for Apparatus For Microdetermination Of Nitrogen By Kjeldahl Method
- ASTM E147-61(2006) Standard Specification for Apparatus For Microdetermination Of Nitrogen By Kjeldahl Method
- ASTM E1779-96a(2004) Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
- ASTM E177-06a Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
- ASTM E177-90a(2002) Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
- ASTM E147-61(2011) Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method
- ASTM F3088-22 Standard Practice for Use of a Centrifugation Method to Quantify/Study Cell-Material Adhesive Interactions
- ASTM F1862-00a Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)
- ASTM F3294-18 Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
- ASTM F2459-18 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
- ASTM D6869-03(2011) Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
- ASTM D8412-21 Standard Guide for Quantification of Microbial Contamination in Liquid Fuels and Fuel-Associated Water by Quantitative Polymerase Chain Reaction (qPCR)
- ASTM C1068-15 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
- ASTM D6869-03 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
- ASTM E2480-12(2017) Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
- ASTM E2480-12(2022) Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
- ASTM D4542-15 Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
- ASTM E699-03 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
- ASTM E699-09 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
- ASTM F2129-03 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM D3162-94(2000)e1 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
- ASTM D3162-94(2005) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
- ASTM E2049-20 Standard Guide for Quantitative Attribute Evaluation of Fragrance/Odors for Hair-care Products by Trained Assessors
- ASTM E208-17 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ASTM F2129-01 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM F2129-04 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM F1862-07 Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)
- ASTM F2129-06 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM F2129-08 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM E208-17e1 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ASTM E208-95a Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ASTM E208-19 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ASTM D7586/D7586M-11 Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies
- ASTM E208-20 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ASTM G213-17 Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
- ASTM D8150-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
AENOR, how to quantify
- UNE 400331:2003 IN Determination of uncertainty for volume measurements made using the gravimetric method.
- UNE 40162-3:1975 CORRECTION OF ATMOSPHERIC PRESSURE AND TEMPERATURE IN MEASUREMENTS MADE WITH "AIR-FLOW" APPARATUS TO DETEMINE AVERAGE DIAMETER OF WOOL FIBRES.
- UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
- UNE-EN ISO 14253-3:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
- UNE 84640:2003 Cosmetic raw materials. 5-bromo-5-nitro-1,3-dioxane. Quantification of 5-bromo-5-nitro-1,3-dioxane by high performance liquid chromatography (HPLC).
CZ-CSN, how to quantify
PT-IPQ, how to quantify
RU-GOST R, how to quantify
- GOST R ISO 8106-2010 Glass containers. Determination of capacity by gravimetric method
- GOST EN 15749-2013 Fertilizers. Determination of sulfates content using three different methods
- GOST R ISO 14088-2015 Leather. Chemical tests. Quantative analysis of tanning agents by filter method
- GOST 32009-2013 Meat and meat products. Spectrophotometric method for determination of total phosphorous content
- GOST R 22.8.08-2001 Safety in emergencies. Method of external gamma rays absorbed dose determination by thermoluminescence of quartz extracted from building ceramics. The order of carrying out measurements
- GOST 32175-2013 Tobacco and tobacco products. Determination of nicotine purity. Gravimetric method using tungstosilicic acid
- GOST 32041-2012 Compound feeds, feed raw materials. Method for determination of crude ash, calcium and phosphorus content by means of NIR-spectroscopy
- GOST 31789-2012 Fish, marine invertebrates and products of their processing. Quantitative determination of biogenic amines content by HPLC method
- GOST R IEC 60754-2-1999 Tests of materials from cables during combustion. Determination of degree of evolved gases by measuring pH and conductivity
- GOST R ISO 16702-2008 Workplace air quality. Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography
- GOST R ISO 22309-2015 State system for insuring the uniformity of measurements. Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
- GOST R 52831-2007 Milk and milk powder. Determination of aflatoxin M1 content. Clean-up by immunoaffinity chromatography and determination by thin-layer chromatography
- GOST ISO 7626-2-1994 Vibration and shock. Experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter
- GOST ISO 14509-3-2015 Small craft. Measurement of airborne sound emitted by powered recreational craft. Part 3. Sound assessment using calculation and measurement procedures
- GOST R 52716-2007 Work-place air. Determination of mass concentration of carbon monoxide. Method using detector tubes for short-term sampling with direct indication
- GOST R 52717-2007 Work-place air. Determination of mass concentration of nitrogen dioxide. Method using detector tubes for short-term sampling with direct indication
- GOST 31810-2012 Rectified ethanol from food raw material. Determination of volatile nitrogen bases mass concentration by capillary electrophoresis method
- GOST ISO 7626-5-1999 Vibration and shock. Experimental determination of mechanical mobility. Part 5. Measurements using impact excitation with an exciter which is not attached to the structure
- GOST 32070-2013 Vodka and ethanol from food raw material. Gas-chromatographic method for determination of carbonic acids and furfural content
Society of Automotive Engineers (SAE), how to quantify
- SAE AIR1075A-1996 Barometry for Altimeter Calibration
- SAE J/ISO 9614-1-2000 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 1: Measurement at Discrete Points
- SAE J/ISO 9614-2-2000 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 2: Measurement by Scanning
- SAE J3013-2012 Friction Material Elastic Constants Determination through FRF Measurements and Optimization
Korean Agency for Technology and Standards (KATS), how to quantify
- KS A 4922-2005(2020) Calibration phantom for X- and γ -ray personal dosimeters
- KS D ISO 22309-2011(2016) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
- KS D ISO 22309-2011(2021) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
- KS M ISO 5398-2:2020 Leather — Chemical determination of chromic oxide content —Part 2: Quantification by colorimetric determination
- KS M ISO 9114:2003 Crude petroleum-Determination of water content by hydride reaction-Field method
- KS M ISO 9114:2013 Crude petroleum－Determination of water content by hydride reaction－Field method
- KS M ISO 5398-3:2020 Leather — Chemical determination of chromic oxide content —Part 3: Quantification by atomic absorption spectrometry
- KS I ISO 14956-2008(2018) Air quality－Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- KS Q ISO 39511:2020 Sequential sampling plans for inspection by variables for percent nonconforming(known standard deviation)
- KS D ISO 22309:2011 Microbeam analysis-Quantitative analysis using energy-dispersive spectrometry(EDS)
- KS M ISO 14851:2012 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium-Method by measuring the oxygen demand in a closed respirometer
- KS B ISO 14253-3-2014(2019) Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment — Part 3: Guidelines for achieving agreements on measurement uncertainty statements
- KS B ISO 14253-2:2020 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment —Part 2: Guidance for the estimation of uncertainty in GPS measurement,in calibration of measu
BE-NBN, how to quantify
- NBN I-969-1969
- NBN P 32-011-1977 Zinc alloys - Complexometric determination of magnesium
- NBN P 32-012-1977 Zinc alloys - Determination of magnesium content -Atomic absorption method
- NBN E 48-104-1987
- NBN P 33-001-1985 Zinc ores - Determination of zinc content
- NBN T 03-296-1980 Sodium tripolyphosphate and sodium pyrophosphate for industrial use - Determination of orthophosphate content - Photometric method using the reduced molybdophosphate
- NBN-EN 24829-1-1992 Steel and cast iron. Determination of total silicon content. Reduced molybdosilicate spectrophotometric method. Part 1: Silicon content between 0,05 and 1 % (ISO 4829-1:1986)
- NBN P 33-002-1985 Zinc ores -Determination of zinc content
- NBN X 44-002-1976 Cleaning equipment for air and other gases - Dust sampling in gas flows and determination of the dustcontents of the gas
Danish Standards Foundation, how to quantify
- DS 3030:2002 Environmental management - Enumeration of presumptive Vibrio vulnificus by semi-quantitative method with enrichment in broth, followed by subculture on solid medium
- DS/ISO/TR 20461:2001 Determination of uncertainty for volume measurements made using the gravemetric method
- DS/ISO/TR 16153:2005 Piston-operated volumetric instruments - Determination of uncertainty for volume measurements made using the photometric method
- DS/ISO 22127:2021 Dosimetry with radiophotoluminescent glass dosimeters for dosimetry audit in MV X-ray radiotherapy
- DS/EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements
- DS 2131.3:1982 Fittings of PEM and PEH for buried gas pipe lines. Inspection of small batches of fittings not inspected by internal regular inspection of production
- DS/EN ISO 14253-1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification
KR-KS, how to quantify
- KS M ISO 5398-2-2020 Leather — Chemical determination of chromic oxide content —Part 2: Quantification by colorimetric determination
- KS M ISO 5398-3-2020 Leather — Chemical determination of chromic oxide content —Part 3: Quantification by atomic absorption spectrometry
- KS Q ISO 39511-2020 Sequential sampling plans for inspection by variables for percent nonconforming(known standard deviation)
- KS Q ISO 8423-2015 Sequential sampling plans for inspection by variables for percent nonconforming(known standard deviation)
- KS D ISO 22489-2018(2023) Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
- KS B ISO 14253-2-2020 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment —Part 2: Guidance for the estimation of uncertainty in GPS measurement,in calibration of measu
VN-TCVN, how to quantify
- TCVN 7371-2004 Soil quality.Determination of total sulfur by dry combustion
- TCVN 7309-2007 Glass containers.Determination of capacity by gravimetric method.Test method
- TCVN 7788-2007 Canned foods.Determination of tin content by atomic absorption spectrophotometric method
- TCVN 7893-2008 Organic liquids.Determination of water by coulometric karl fischer titration
- TCVN 7757-2007 Middle Distillate Fuels.Determination of water and sediment by centrifuge
- TCVN 7787-2007 Dried skimmed milk.Determination of vitamin D content using high-performance liquid chromatography
- TCVN 7370-2-2007 Soil quality.Dissolution for the determination of total element content.Part 2: Dissolution by alkaline fusion
- TCVN 8126-2009 Foods.Determination of lead, cadmium, zinc, copper, and iron.Atomic absorption spectrophotometry after microwave digestion
- TCVN 7723-2007 Water quality.Determination of total cyanide and free cyanide by continuous flow analysis
- TCVN 7370-1-2004 Soils quality.Dissolution for the determination of total element content.Part 1: Dissolution with hydrofluoric and perchloric acids
UY-UNIT, how to quantify
IT-UNI, how to quantify
Japanese Industrial Standards Committee (JISC), how to quantify
- JIS P 8110:2001 Paper and board -- Sampling to determine average quality
- JIS Z 7152:2013 Determination of PM10/PM2.5 mass concentration in flue gas by use of virtual impactors
- JIS B 8397-3:2001 Hydraulic fluid power -- Determination of characteristics of motors -- Part 3: At constant flow and at constant torque
- JIS B 1757-2:2010 Evaluation of instruments for the measurement of individual gears -- Part 2: Tooth form measurement using sphere or cylinder artifacts
- JIS B 0641-1:2001 Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformance or nonconformance with specifications
- JIS Z 9004:1983 Single sampling inspection plans having desired operating characteristics by variables (standard deviation unknown and single limit specified)
- JIS K 6950:2000 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by measuring the oxygen demand in a closed respirometer
International Organization for Standardization (ISO), how to quantify
- ISO 22309:2006 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS)
- ISO 9874:1992 Milk; determination of total phosphorus content; method using molecular absorption spectrometry
- ISO/TS 23647:2010 Vegetable fats and oils - Determination of wax content by gas chromatography
- ISO 13550:2002 Hydrometric determinations - Flow measurements in open channels using structures - Use of vertical underflow gates
- ISO 22262-2:2014 Air quality - Bulk materials - Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
- ISO 13517:2013 Metallic powders.Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)
- ISO 24173:2009 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction
- ISO 23210:2009 Stationary source emissions - Determination of PM<(Index)10>/PM<(Index)2,5> mass concentration in flue gas - Measurement at low concentrations by use of impactors
- ISO/TS 27106:2009 Cheese - Determination of nisin A content by LC-MS and LC-MS-MS
- ISO/TS 27106:2009|IDF/RM 217:2009 Determination of nisin A content in cheese using LC-MS and LC-MS-MS
- ISO 14385-2:2014 Stationary source emissions - Greenhouse gases - Part 2: Ongoing quality control of automated measuring systems
- ISO 21066:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) — Qualitative and semiquantitative assessment of the photocatalytic activities of surfaces by the reduction of resazurin in a deposited i
- ISO 22309:2011 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
- ISO 13271:2012/CD Amd 1:2011 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors — Amendment 1
- ISO 19238:2004 Radiation protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- ISO 19238:2014 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- ISO 27893:2011 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
- ISO 19238:2023 Radiological protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics — Dicentric assay
- ISO 14322:2012 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
- ISO/DIS 20427:2023 Pigments and extenders — Dispersion procedure for sedimentational particle sizing of suspended pigment or extender with liquid sedimentation methods
- ISO 21915-3:2020 Textiles — Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends — Part 3: Blend quantification using spectral analysis method
- ISO 21915-2:2020 Textiles — Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends — Part 2: Blend quantification using light microscopy method
- ISO 14322:2018 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
- ISO 19238:2011 Radiological protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics — Dicentric assay
- ISO/TS 21033:2011 Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES)
- ISO 13859:2014 Soil quality - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
- ISO 5530-1:2013 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph
- ISO/PRF 20427:2023 Pigments and extenders — Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods
- ISO 19232-5:2013 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators
- ISO/CD TS 12869-2:2023 Water quality — Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR) — Part 2: On-site methods
- ISO/IEC GUIDE 98-3:2008/Suppl 1:2008/Cor 1:2009 Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) - Supplement 1: Propagation of distributions using a Monte Carlo method; Technical Corrigendum 1
- ISO/CD 17099 Radiological protection — Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry
- ISO/DIS 17099:2011 Radiological protection — Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry
- ISO 11451-1:1995 Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Vehicle test methods - Part 1: General and definitions
- ISO 11452-1:1995 Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods - Part 1: General and definitions
- ISO/FDIS 19238 Radiological protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics — The dicentric assay
British Standards Institution (BSI), how to quantify
- BS EN ISO 5398-3:2007 Leather. Chemical determination of chromic oxide content. Quantification by atomic absorption spectrometry
- BS ISO 6101-6:2011 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of magnesium content
- BS ISO 6101-6:2018 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of magnesium content
- BS ISO 22262-2:2014 Air quality. Bulk materials. Quantitative determination of asbestos by gravimetric and microscopical methods
- BS EN ISO 14956:2002 Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- 21/30444420 DC BS EN ISO 9288. Thermal insulation. Heat transfer by radiation. Physical quantities and definitions
- BS ISO 8368:2019 Hydrometric determinations. Flow measurements in open channels using structures. Guidelines for selection of structure
- BS ISO 14385-2:2014 Stationary source emissions. Greenhouse gases. Ongoing quality control of automated measuring systems
- 12/30251709 DC BS ISO/ASTM 51631. Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
- BS EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
- 19/30366981 DC BS ISO 21915-2. Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends. Part 2. Blend quantification using light microscopy method
- 19/30366984 DC BS ISO 21915-3. Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends. Part 3. Blend quantification using spectral analysis method
- BS ISO/ASTM 51818:2020 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 k
- 13/30281229 DC BS ISO 51956. Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing
- BS ISO 22127:2019 Dosimetry with radiophotoluminescent glass dosimeters for dosimetry audit in MV X-ray radiotherapy
- BS EN ISO 17512-1:2020 Soil quality. Avoidance test for determining the quality of soils and effects of chemicals on behaviour. Test with earthworms (Eisenia fetida and Eisenia andrei)
- BS EN ISO 11210:2023 Tracked Changes. Jewellery and precious metals. Determination of platinum. Gravimetry using ammonium chloride
- 12/30273487 DC BS ISO 51818. Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV
- BS EN ISO 17601:2018 Soil quality. Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil
- BS 5293-8:1996 Sampling and testing carbon black for use in the rubber industry. Method for determination of dust content
- 19/30357573 DC BS ISO 22127. Dosimetry with radiophotoluminescent glass dosimeters for dosimetry audit in MV X-ray radiotherapy
- BS 5293-3:1996 Sampling and testing carbon black for use in the rubber industry. Method for determination of fines content
- BS EN ISO 2931:2010 Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
- BS ISO 22309:2011 Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
- 14/30303365 DC BS ISO/ASTM 51649. Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
- BS ISO 19238:2004 Radiation protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- BS EN ISO 11490:2023 Tracked Changes. Jewellery and precious metals. Determination of palladium. Gravimetry using dimethylglyoxime
- 18/30371151 DC BS ISO 28057. Clinical dosimetry. Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
- BS ISO 20418-2:2018 Textiles. Qualitative and quantitative proteomic analysis of some animal hair fibres - Peptide detection using MALDI-TOF MS
- BS ISO 14322:2012 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
- BS EN 16168:2012 Sludge, treated biowaste and soil. Determination of total nitrogen using dry combustion method
- BS ISO 19238:2014 Radiological protection. Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- BS ISO 28597:2017 Tracked Changes. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
- BS EN ISO 19238:2017 Radiological protection. Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- 22/30450641 DC BS EN ISO 11490. Jewellery and precious metals. Determination of palladium in palladium alloys. Gravimetric determination after precipitation using dimethylglyoxime
- BS EN ISO 16526-2:2020 Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Constancy check by the thick filter method
- BS EN 27627-6:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of chromium in contents 0,01 to 2 % (m/m)
- BS ISO 21915-3:2020 Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends - Blend quantification using spectral analysis method
- BS 1902-9.3:1998 Methods of testing refractory materials - Chemical analysis by instrumental methods - Determination of chromium (VI)
- BS EN ISO 20706-1:2019 Textiles. Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends - Fibre identification using microscopy methods
- 23/30461285 DC BS ISO 20427. Pigments and extenders. Dispersion procedure for sedimentational particle sizing of suspended pigment or extender with liquid sedimentation methods
- BS ISO 22278:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for crystalline quality of single-crystal thin film (wafer) using XRD method with parallel X-ray beam
- BS ISO 21915-2:2020 Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends - Blend quantification using light microscopy method
- 19/30366978 DC BS ISO 21915-1. Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends. Part 1. Fibre identification using scanning electron microscopy and spectral analysis methods
- 14/30303362 DC BS ISO/ASTM 51608. Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV
- 22/30437105 DC BS ISO 19238. Radiological protection. Performance criteria for service laboratories performing biological dosimetry by cytogenetics. The dicentric assay
- BS EN ISO 20418-1:2018 Textiles. Qualitative and quantitative proteomic analysis of some animal hair fibres - Peptide detection using LC-ESI-MS with protein reduction
- BS EN 27627-4:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m)
- BS EN ISO 20418-3:2020 Textiles. Qualitative and quantitative proteomic analysis of some animal hair fibres - Peptide detection using LC-MS without protein reduction
- BS EN ISO 17099:2017 Radiological protection. Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry
- BS EN ISO 19238:2023 Tracked Changes. Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics - Dicentric assay
- BS 6897-5:1995 Experimental determination of mechanical mobility - Measurement using impact excitation with an exciter which is not attached to the structure
RO-ASRO, how to quantify
- STAS R 12091-1982 MEASUREMENT OF FLUID FLOW Estimation of uncertainty af a flow-rate measurement
- STAS 11323-1987 TEXTILES Methods for removal of non-fibrous matters prior to chemical quantitative analysis of textile fibre mixtures
- STAS 8942/3-1984 Foundation ground DETERMINATION OF LINEAR MODULUS OF DEFORMATION BY IN SITU TESTS WITH PLATE
- STAS 1242/8-1975 FOUNDATION GROUND Principles for geophysical investigation of ground by electrometric methods under continuous current
CL-INN, how to quantify
AR-IRAM, how to quantify
PL-PKN, how to quantify
- PN G04514-17-1993 Solid fuel. Determination of sulphur. Determination of sulphur by using automatic analysers
- PN C04586-11-1990 Water and waste water Tests for iron Determination of dissolve iron by semi-quantitative method with colorimetric test
- PN P04846-1992 Textiles. Quantitative analysis of two and threecomponent mixtures of fibres using hand separation method
- PN-ISO 19344-2021-06 P Milk and milk products -- Starter cultures, probiotics and fermented products -- Quantification of lactic acid bacteria by flow cytometry
IX-FAO, how to quantify
- CAC/GL 56-2005 Guidelines on the Use of Mass Spectrometry (MS) for Identification, Confirmation and Quantative Determination of Residues
ES-AENOR, how to quantify
未注明发布机构, how to quantify
- BS ISO 15568:1998(2000) Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
German Institute for Standardization, how to quantify
- DIN 6802-4:1998-04 Neutron dosimetry - Part 4: Measurement technique for individual dosimetry using albedo dosimeters / Note: To be replaced by DIN EN ISO 21909-2 (t) (in preparation), DIN ISO 21909-2 (2022-11, t).
- DIN 54274:1983 Testing of textiles; quantitative analysis of amino end groups in polyamide fibres
- DIN 25456-4:1999-10 Neutron fluence measurement - Part 4: Fast-neutron fluence determination with niob activation detectors
- DIN 25456-3:1999-10 Neutron fluence measurement - Part 3: Fast-neutron fluence determination with nickel activation detectors
- DIN 25456-6:1999-10 Neutron fluence measurement - Part 6: Fast-neutron fluence determination with thorium fission detectors
- DIN 25456-5:1999-10 Neutron fluence measurement - Part 5: Fast-neutron fluence determination with copper activation detectors
- DIN 25456-2:1999-10 Neutron fluence measurement - Part 2: Fast-neutron fluence determination with iron activation detectors
- DIN EN ISO 23210:2009-12 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
- DIN 19268:2021-10 pH-measurement - pH-measurement of aqueous solutions with pH measuring chains with pH glass electrodes and evaluation of measurement uncertainty
- DIN EN ISO 14956:2003-01 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002); German version EN ISO 14956:2002
- DIN ISO 13752:1999 Air quality - Assessment of the uncertainty of a measurement method under field conditions using a second method as reference (ISO 13752:1998)
- DIN EN 15972:2011 Water quality - Guidance on quantitative and qualitative investigations of marine phytoplankton; German version EN 15972:2011
- DIN 25456-1:1999-10 Neutron fluence measurement - Part 1: Fast-neutron fluence determination with activation and fission detectors
- DIN EN ISO 28057:2021-06 Clinical dosimetry - Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy (ISO 28057:2019); German version EN ISO 28057:2021
- DIN EN ISO 17601:2018-08 Soil quality - Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil (ISO 17601:2016); German version EN ISO 17601:2018
- DIN EN 15749:2010 Fertilizers - Determination of sulfates content using three different methods; German version EN 15749:2009
- DIN ISO 24173:2013 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction (ISO 24713:2009)
- DIN EN ISO 17512-1:2020-12 Soil quality - Avoidance test for determining the quality of soils and effects of chemicals on behaviour - Part 1: Test with earthworms (Eisenia fetida and Eisenia andrei) (ISO 17512-1:2008); German version EN ISO 17512-1:2020
- DIN EN ISO 22127:2021 Dosimetry with radiophotoluminescent glass dosimeters for dosimetry audit in MV X-ray radiotherapy (ISO 22127:2019); German and English version prEN ISO 22127:2021
- DIN 54386:1994 Testing of paper, board and pulp; photometric determination of the copper content with bathocuproin; determination after decomposition with nitric acid
- DIN ISO 22309:2015-11 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above (ISO 22309:2011)
- DIN 53528:1988 Testing of rubber-coated textiles; abrasion test; determination of loss in mass by the Frank Hauser apparatus
- DIN EN 12373-6:1999 Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment; German version EN 1237
- DIN ISO 22309:2015 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above (ISO 22309:2011)
- DIN EN ISO 17601:2018 Soil quality - Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil (ISO 17601:2016)
- DIN 6800-1:2016-08 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 1: General
- DIN EN ISO 5398-2:2009 Leather - Chemical determination of chromic oxide content - Part 2: Quantification by colorimetric determination (ISO 5398-2:2009); English version of DIN EN ISO 5398-2:2009-06
- DIN EN ISO 17081:2008 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (ISO 17081:2004); English version of DIN EN ISO 17081:2008-07
- DIN SPEC 52049:2014 Testing of bitumen - Determination of water content of bituminous emulsions - Drying test by infrared dryers
- DIN EN ISO 19238:2020-05 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics (ISO 19238:2014); German version EN ISO 19238:2017 / Note: To be replaced by DIN EN ISO 19238 (2022-12).
- DIN 51391-2:1994-03 Testing of lubricants; determination of the content of additive elements; analysis by wavelengthdispersive X-ray spectrometry (XRS)
- DIN 33961-4:2019-03 Fitness club - Requirements for equipment and operation - Part 4: Strength training with stationary training equipment / Note: Applies in conjunction with DIN 33961-1 (2015-11).
- DIN EN ISO 13517:2013 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013); German version EN ISO 13517:2013
- DIN EN ISO 19238:2022-12 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics - The dicentric assay (ISO/DIS 19238:2022); German and English version prEN ISO 19238:2022 / Note: Date of issue 2022-11-11*Intended...
- DIN EN 12373-5:1999 Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998
- DIN EN ISO 17226-2:2009 Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis (ISO 17226-2:2008) (includes Corrigendum AC:2009); English version of DIN EN ISO 17226-2:2009-09
- DIN 54212:1975 Testing of textiles; quantitative analysis of binary mixtures, casein fibres with other fibres, trypsin method
- DIN EN 50693:2018 Method for quantitative eco design via life cycle assessment and environmental declarations through product category rules for EEE; German and English version prEN 50693:2018
- DIN EN ISO 19238:2020 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics (ISO 19238:2014)
- DIN EN ISO 14253-3:2011-10 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011); German version EN ISO 14253-3:2011
- DIN EN ISO 17099:2020-03 Radiological protection - Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry (ISO 17099:2014); German version EN ISO 17099:2017
- DIN CEN/TS 13649:2015-03*DIN SPEC 33969:2015-03 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption; German version CEN/TS 13649:2014
- DIN EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
- DIN 51913:2013 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
- DIN EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
ES-UNE, how to quantify
- UNE-EN ISO 14088:2021 Leather - Chemical tests - Quantitative analysis of tanning agents by filter method (ISO 14088:2020)
- UNE-EN ISO 17512-1:2020 Soil quality - Avoidance test for determining the quality of soils and effects of chemicals on behaviour - Part 1: Test with earthworms (Eisenia fetida and Eisenia andrei) (ISO 17512-1:2008) (Endorsed by Asociación Española de Normalización in June ...
- UNE-EN ISO 17512-2:2020 Soil quality - Avoidance test for determining the quality of soils and effects of chemicals on behaviour - Part 2: Test with collembolans (Folsomia candida) (ISO 17512-2:2011) (Endorsed by Asociación Española de Normalización in June of 2020.)
- UNE-EN ISO 17601:2018 Soil quality - Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil (ISO 17601:2016) (Endorsed by Asociación Española de Normalización in April of 2018.)
- UNE-EN ISO 28057:2021 Clinical dosimetry - Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy (ISO 28057:2019) (Endorsed by Asociación Española de Normalización in March of 2021.)
- UNE-ISO/TS 12869:2021 Water quality. Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR)
- UNE-EN ISO 19238:2018 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics (ISO 19238:2014)
- UNE-EN ISO 17099:2018 Radiological protection - Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry (ISO 17099:2014)
- UNE-CEN/TS 13649:2014 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption (Endorsed by Asociación Española de Normalización in August...
Association Francaise de Normalisation, how to quantify
- FD V09-503:2022 Analyse sensorielle - Mesure des performances d'un jury, ou plusieurs jurys, réalisant des profils sensoriels quantatifs
- NF EN ISO 23210:2009 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des faibles concentrations au moyen d'impacteurs
- NF X43-066-2*NF ISO 22262-2:2014 Air quality - Bulk materials - Part 2 : quantitative determination of asbestos by gravimetric and microscopical methods
- XP X43-331:1996 Qualité de l'air - Émissions de sources fixes - Détermination de l'intervalle de confiance d'une méthode de mesure en l'absence d'échantillon de référence par mesures parallèles simultanées.
- NF A95-114:2013 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)
- NF EN ISO 14956:2002 Qualité de l'air - Évaluation de l'aptitude à l'emploi d'une procédure de mesurage par comparaison avec une incertitude de mesure requise
- FD X43-070-3:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 3 : Estimation of the uncertainties on measurements of benzene conducted in situ by diffusion tube followed by a thermal desorpt
- NF ISO 13271:2012 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des hautes concentrations à l'aide des impacteurs virtuels
- X10-342:1992 Measurement of liquid flow in open channels. Measurement in meandering rivers and in streams with unstable boudaries.
- NF V04-034*NF ISO 26462:2010 Milk - Determination of lactose content - Enzymatic method using difference in pH.
- NF X43-505*NF ISO 13752:1998 Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as a reference.
- NF X43-508*NF EN ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- NF X50-072:1998 General requirements for bodies operating assessment and certification/registration of quality systems.
- NF X43-342*NF ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors.
- NF ISO 21741:2021 Émissions de sources fixes - Échantillonnage et détermination de la teneur en mercure dans les gaz de combustion en utilisant un piège d'amalgamation avec de l'or
- NF ISO 13752:1998 Qualité de l'air - Évaluation de l'incertitude d'une méthode de mesurage sur site en utilisant une seconde méthode comme référence
- NF M60-572*NF ISO 22127:2020 Dosimetry with radiophotoluminescent glass dosimeters for dosimetry audit in MV X-ray radiotherapy
- NF EN ISO 28057:2021 Dosimétrie clinique - Dosimétrie avec détecteurs thermoluminescents solides pour les rayonnements de photons et d'électrons en radiothérapie
- NF ISO 22127:2020 Dosimétrie avec dosimètres radiophotoluminescents de type verre utilisée pour l'audit dosimétrique en radiothérapie à rayons X de haute énergie
- NF X31-115:2001 Soil quality - Sampling and storage of soil samples in view of determination of mineral nitrogen on fresh soil.
- NF X43-264:2019 Qualité de l'air - Air des lieux de travail - Prélèvement et dosage d'aldéhydes par pompage sur support imprégné de DNPH et dosage par chromatographie en phase liquide CLPH
- NF X11-602:1977 Determination of the area per unit of mass of powders by various methods of air permeametry.
- NF X10-525*NF ISO 27893:2013 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
- XP CEN/TS 17701-1:2022 Biostimulants des végétaux - Dosage des éléments spécifiques - Partie 1 : digestion à l'eau régale pour le dosage ultérieur des éléments
- NF M60-220:2005 Radiation protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics.
- NF C42-710:1988 Photometers. Determination of metrological characteristics, classification according to the latter, calibration, check of the main characteristics liable to vary with time.
- NF S31-100-1*NF EN ISO 9614-1:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1 : measurement at discrete points
- NF M60-318:2002 Nuclear energy - Nuclear fuel technology - Waste - Thermal reactivity assessment of bituminized waste by microcalorimetry
- NF X21-006:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy.
- NF A09-205-1*NF EN ISO 19232-1:2013 Non-destructive testing - Image quality of radiographs - Part 1 : Determination of the image quality value using wire-type image quality indicators
- NF X31-428-1*NF ISO 14869-1:2001 Soil quality - Dissolution for the determination of total element contents - Part 1: dissolution with hydrofluoric and perchloric acids.
- NF ISO 22309:2012 Analyse par microfaisceaux - Analyse élémentaire quantitative par spectrométrie à sélection d'énergie (EDS) des éléments ayant un numéro atomique de 11 (Na) ou plus
- NF EN 62059-32-1:2012 Appareils de comptage d'électricité - Sûreté de fonctionnement - Partie 32-1 : durabilité - Contrôle de stabilité des caractéristiques métrologiques en appliquant une température élevée
- NF M60-220:2014 Radiation protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- NF A05-215*NF EN ISO 17081:2014 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- NF A05-215:2008 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique.
- NF M60-220*NF EN ISO 19238:2017 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- NF EN ISO 19238:2017 Radioprotection - Critères de performance pour les laboratoires de service pratiquant la dosimétrie biologique par cytogénétique
- NF X43-273:1991 Qualité de l'air - Air des lieux de travail - Détermination du bromure de méthyle - Prélèvement par pompage sur charbon actif traité.
- NF V03-713:2010 Cereals, cereals-based products and animal feeding stuffs - Determination of crude fat and total fat content by the Randall extraction method.
- NF T20-082:1976 Produits chimiques à usage industriel - Échantillonnage en vue de la détermination d'un titre moyen dans le cas ou l'écart-type de la dispersion de la grandeur mesurée est inconnu.
- NF E10-201-5*NF EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 : uncertainty in verification testing of indicating measuring instruments
- NF T20-081:1976 Produits chimiques à usage industriel - Échantillonnage en vue de la détermination d'un titre moyen dans le cas ou l'écart-type de la dispersion de la grandeur mesurée est connu.
- XP CEN/TS 16115-1:2011 Qualité de l'air ambiant - Mesurage de bioaérosols - Partie 1 : dosage des moisissures à l'aide de systèmes de prélèvement sur filtres et d'analyses de cultures
- FD X07-039:2018 Role of measurement uncertainty in conformity assessment - Implementation of NF ISO/IEC Guide 98-4 - Illustration through industrial case studies
- NF C42-711:1989 Luminance meters. Determination of metrological characteristics, classification according to the latter, calibration, check of the main characteristics liable to vary with time.
- NF EN ISO 14253-2:2011 Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 2 : lignes directrices pour l'estimation de l'incertitude dans les mesures GPS, dans l'étalonnage des équipements de m...
- NF A09-205-5:2013 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators
- GA X43-139:2014 Stationary source emissions - Guide for performance tests and periodic monitoring tests to be carried out on semi-continuous PCDDs and PCDFs measurement systems and for the management of cartridges
- XP X43-341*XP CEN/TS 13649:2015 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling methode followed by solvent extraction or thermal desorption
- XP CEN/TS 13649:2015 Émissions de sources fixes - Détermination de la concentration massique en composés organiques gazeux individuels - Échantillonnage par adsorption et extraction par solvant ou thermodésorption
- NF E10-201-1*NF EN ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications
- NF V04-397*NF ISO 19344:2016 Milk and milk products - Starter cultures, probiotics and fermented products - Quantification of lactic acid bacteria by flow cytometry
European Committee for Standardization (CEN), how to quantify
- EN ISO 11490:2023 Jewellery and precious metals - Determination of palladium - Gravimetry using dimethylglyoxime (ISO 11490:2023)
- EN ISO 13517:2020 Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
- EN ISO 13517:2013 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)
- EN ISO 11489:1995 Determination of Platinum in Platinum Jewellery Alloys - Gravimetric Method After Reduction with Mercury(I) Chloride (ISO 11489 : 1995)
- EN ISO 11490:1995 Determination of Palladium in Palladium Jewellery Alloys - Gravimetric Method with Dimethyl Glyoxime (ISO 11490 : 1995)
- EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
- prEN ISO 22127:2021 Dosimetry with radiophotoluminescent glass dosimeters for dosimetry audit in MV X-ray radiotherapy (ISO 22127:2019)
- EN 12544-2:2000 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method
- EN ISO 19238:2017 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- EN ISO 17081:2008 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- EN ISO 19238:2023 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics - Dicentric assay (ISO 19238:2023)
- prEN ISO 19238 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics - The dicentric assay (ISO/DIS 19238:2022)
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), how to quantify
- ASHRAE 139-1998 Method of Testing for Rating Desiccant Dehumidifiers Utilizing Heat for Regeneration Process
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., how to quantify
- ASHRAE 139-2015 Method of Testing for Rating Desiccant Dehumidifiers Utilizing Heat for the Regeneration Process
- ASHRAE 139-2019 Method of Testing for Rating Desiccant Dehumidifiers Utilizing Heat for the Regeneration Process
- ASHRAE 139 ERTA-2007 Method of Testing for Rating Desiccant Dehumidifiers Utilizing Heat for the Regeneration Process
Association of German Mechanical Engineers, how to quantify
- VDI/VDE 2602 Blatt 4-2014 Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement
PK-PSQCA, how to quantify
- PS 1359-1975 DETERMINATION OF GROSS CALORIFIC VALUE BY THE CALORIMETRIC BOMB METHOD AND CALCULATIONS OF NET CALORIFIC VALUE
SAE - SAE International, how to quantify
- SAE J3013-2019 Friction Material Elastic Constants Determination through FRF Measurements and Optimization
Professional Standard - Commodity Inspection, how to quantify
- SN/T 0009.3-2010 General rules for drafting inspection and quarantine standards on import and export commoditie.Part 3:Weight survey
Lithuanian Standards Office , how to quantify
- LST EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
- LST EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
YU-JUS, how to quantify
- JUS U.B1.011-1998 Testing ofsoil - Determination moisture content of soil in place by nuclear methods (Shallow depth)
- JUS C.A1.543-1990 Eardmetals. Chemical analysis by flame atomic absorption spectrometry. Determi-natlon of cobalt, ircm, manganese and nickel in contents from 0,01 to 0,5 %(mjm)
- JUS C.A1.542-1990 Eardmetals. Chemical analysis by flame atomic absorption spectrometry. Determi-nation of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 %(mfm)
- JUS C.A1.545-1990 Eardmetals. Chemical analysis by flame atomic absorption spectrometr?. Determl-nation of cobalt, ircm, manganese, molybdenum, nickel, titanium and vanadium ±n contents from 0,5 to 2 %(m/m)
- JUS C.A1.544-1990 Hardmetals. Chemical analysis by flane atomic absorption spectrometrj. Determi-nation of molybdemim, tItanium and vanadium in contents from 0,01 to 0,5 % (m/m)
American National Standards Institute （ANSI), how to quantify
- ANSI/ASTM F1862:2000 Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)
- ANSI/ASTM F1321:2014 Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
- ANSI/ASTM F1321:2021 Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
- ANSI/ASTM E1649:2013 Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
- ANSI/ASTM F1321:2013 Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
- ANSI S2.32-1982 Methods for the Experimental Determination of Mechanical Mobility, Part II: Measurements Using Single-Point Translation Excitation
(U.S.) Telecommunications Industries Association , how to quantify
- TIA/EIA-455-113-1997 FOTP-113 Polarization-Mode Dispersion Measurement for Single-Mode Optical Fibers by the Fixed Analyzer Method
VE-FONDONORMA, how to quantify
National Association of Corrosion Engineers (NACE), how to quantify
- NACE TM0173-1999 Methods for Determining Quality of Subsurface Injection Water Using Membrane Filters Item No:21205
NATO - North Atlantic Treaty Organization, how to quantify
- ANEP-12-1985 Throughput Improvement for Systems Implementing the Standard Serial Interface Defined in STANAG 4153 (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32
GOSTR, how to quantify
- GOST R 50.05.16-2018 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of control. Non-destructive control. Metrological assurance
- GOST R 50.05.08-2018 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of control. Unified methods. Visual and measuring control
- GOST R 50.05.22-2020 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Quality assessment for metallographic examination of welded joints and cladded surfaces
- GOST R 50.05.23-2020 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Non-destructive examination of welded joints and cladded surfaces. Qualit yassessment norms
AT-ON, how to quantify
- OENORM EN ISO 22127:2021 Dosimetry with radiophotoluminescent glass dosimeters for dosimetry audit in MV X-ray radiotherapy (ISO 22127:2019)
NL-NEN, how to quantify
- NEN 6641-1983 Sludge - Determination of the sum of ammoniacal and organically bound nitrogen according to Kjeldahl after mineralization with selenium
- NEN 6622-1988 Sludge - Determination of sand and other acidinsoluble material, and the fraction with a partiele size greater than 0,1 mm - Gravimetric method
- NEN 6432-1993 Water. Determination of arsenic content by atomic absorption spectrometry (hydride generation technique). Destruction with nitric acid and hydrochloric acid
- NEN 6433-1993 Water. Determination of antimony content by atomic absorption spectrometry (hydride generation technique). Destruction with nitric acid and hydrochloric acid
- NEN 6434-1993 Water. Determination of selenium content by atomic absorption spectrometry (hydride generation technique). Destruction with nitric acid and hydrochloric acid
- NEN 6449-1981 Water - Determination of total mercury content by atomic absorption spectrometry - Digestion with permanganate and persulphate
- NEN 5762-1990 Soil - Determination of cadmium content by atomic absorption spectrometry (flame technique) after destruction with nitric acid and hydrochloric acid
- NEN 5767-1991 Soil -Determination of chromium content by atomic absorption spectrometry (flame technique) after destruction with nitric acid and hydrochloric acid
- NEN 5759-1990 Soil - Determination of zinc content by atomic absorption spectrometry (flame technique) after destruction with nitric acid and hydrochloric acid
- NEN 5765-1991 Soil - Determination of nickel content by atomic absorption spectrometry (flame technique) after destruction with nitric acid and hydrochloric acid
- NEN 6482-1982 Water - Determination of the sum of ammoniacal and organically bound nitrogen according to Kjeldahl after mineralization with selenium
- NEN 5758-1990 Soil - Determination of copper content by atomic absorption spectrometry (flame technique) after destruction with nitric acid and hydrochloric acid
- NEN 5760-1991 Soil - Determination of arsenic content by atomic absorption spectrometry (hydride generation technique) after destruction with nitric acid and hydrochloric acid
- NEN 6481-1983 Water - Determination of the sum of ammoniacal and organically bound nitrogen according to Kjeldahl after mineralization with selenium
- NEN 5761-1990 Soil - Determination of lead content by atomic absorption spectrometry (flame technique) after destruction with nitric acid and hydrochloric acid
- NEN 6438-1986 Sludge-Determination of the total mercury content byatomicabsorptionspectrometry Destruction with sulphuric acid and nitric acid under reflux
International Electrotechnical Commission (IEC), how to quantify
- IEC TR 60363:1972 Short-circuit current evaluation with special regard to rated short-circuit capacity of circuit-breakers in installations in ships
TR-TSE, how to quantify
- TS 2675-1977 Anodizing Of Aluminium And Its Alloys - Assessment Of Sealing Quality By Measurement Of The Loss Of Mass After Immersion In Acid Solution
- TS 2676-1977 ANODIZING OP ALUMINIUM AND ITS ALLOYS - ASSESSMENT OP SEALING PUALITY BY MEASUREMENT OF THE LOSS OP MASS AFTER IMMERSION IN PHOSPHORIC - CHROMIC ACID SOLUTION
CU-NC, how to quantify
- NC 54-288-1984 Construction Materials and Products. Procedure for Pe'rforming Gaging Tests for Determining the Hydrogeological Parameters. Testing Method
FI-SFS, how to quantify
Standard Association of Australia （SAA）, how to quantify
- AS 4351.3:1996 Biodegradability - Organic compounds in an aqueous medium - Determination by oxygen demand in a closed respirometer
- AS 2360.1.4:1993 Measurement of fluid flow in closed conduits - Pressure differential methods - Measurement using orifice plates, nozzles or Venturi tubes - Guide to the effect of departure from the conditions specified in Part 1.1
- AS 2360.1.3:1993 Measurement of fluid flow in closed conduits - Pressure differential methods - Measurement using orifice plates, nozzles or Venturi tubes - Guide to the use of methods specified in Parts 1.1 and 1.2
- AS 4351.5:1996 Biodegradability - Organic compounds in an aqueous medium - Determination by analysis of biochemical oxygen demand (closed bottle test)
API - American Petroleum Institute, how to quantify
- API MPMS 7.4-1993 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 4 - Static Temperature Determination Using Fixed Automatic Tank Thermometers
- API MPMS 7.3-1985 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 3 - Static Temperature Determination Using Portable Electronic Thermometers (First Edition)
Institute of Electrical and Electronics Engineers (IEEE), how to quantify
- IEEE P2465/D16, September 2023 IEEE Draft Trial-Use Recommended Practice for Pulse-Type Partial Discharge Measurements on Individual Stator Coils and Bars
- IEEE P2465/D15, October 2022 IEEE Draft Trial-Use Recommended Practice for Pulse-Type Partial Discharge Measurements on Individual Stator Coils and Bars
Acoustical Society of America (ASA), how to quantify
- ASA S2.32-1982 Methods for the Experimental Determination of Mechanical Mobility. Part II: Measurements Using Single-Point Translational Excitation
International Telecommunication Union (ITU), how to quantify
- ITU-T P.78 FRENCH-1996 Subjective Testing Method for Determination of Loudness Ratings in Accordance with Recommendation P.76
- ITU-T P.78 SPANISH-1996 Subjective Testing Method for Determination of Loudness Ratings in Accordance with Recommendation P.76
- ITU-R S.446-4 SPANISH-1993 Carrier energy dispersal for systems employing angle modulation by analogue signals or digital modulation in the fixed-satellite service
IX-EU/EC, how to quantify
- EEC/291/92-1992 Commission Regulation Amending Regulation (EEC) No 1730/87 Laying down Quality Standards for Table Grapes
- EEC/305/92-1992 Commission Regulation Amending Regulation (EEC) No 410/90 Laying down Quality Standards for Kiwi Fruit
CENELEC - European Committee for Electrotechnical Standardization, how to quantify
- PREN 50693-2018 Method for quantitative eco design via life cycle assessment and environmental declarations through product category rules for EEE
Aerospace, Security and Defence Industries Association of Europe (ASD), how to quantify
- ASD-STAN TR 4648-2009 Aerospace series Cable, electrical Re-qualification following changes in design, material or manufacturing process (Edition 1)
ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, how to quantify
- ITU-R S.446-4-1993 Carrier Energy Dispersal for Systems Employing Angle Modulation by Analogue Signals or Digital Modulation in the Fixed-Satellite Service