ZH
RU
ES

Iron oxide carbon material

Iron oxide carbon material, Total:498 items.

In the international standard classification, Iron oxide carbon material involves: Ferrous metals, Magnetic materials, Components for electrical equipment, Protection against fire, Construction materials, Inorganic chemicals, Analytical chemistry, Fertilizers, Paint ingredients, Refractories, Testing of metals, Lubricants, industrial oils and related products, Metalliferous minerals, Organic chemicals, Non-metalliferous minerals, Materials for aerospace construction, Water quality, Plastics, Paints and varnishes, Beverages, Products of non-ferrous metals, Welding, brazing and soldering, Iron and steel products, Rubber and plastics products, Vocabularies, Conducting materials, Products of the chemical industry, Road vehicle systems, Environmental protection, Reinforced plastics, Farming and forestry, Rotating machinery, Semiconducting materials, Fuels, Waxes, bituminous materials and other petroleum products, Non-ferrous metals, Packaging and distribution of goods in general, Raw materials for rubber and plastics, Insulating fluids, Wood, sawlogs and sawn timber, Electricity. Magnetism. Electrical and magnetic measurements, Electrical and electronic testing, Fluid storage devices, Ceramics, Heat treatment, Surface treatment and coating, Powder metallurgy, Wastes, Protection of and in buildings, Packaging materials and accessories, Extraction and processing of petroleum and natural gas.

Association Francaise de Normalisation, Iron oxide carbon material

NF F62-001-1:1991 Matériel roulant ferroviaire - Microdisjoncteurs magnétothermiques à maximum de courant pour circuits de commande et d'auxiliaires - Généralités et essais.
NF C93-345:2006 Soft ferrite material classification.
NF C93-345*NF EN 61332:2017 Soft ferrite material classification
NF EN 61332:2017 Classification des matériaux ferrites doux
NF F80-103:1989 Matériel roulant ferroviaire - Aciers d'usage recommandé pour la construction du matériel roulant ferroviaire - III - Aciers de construction à résistance améliorée à la corrosion atmosphérique (aciers au cuivre).
NF B40-676*NF EN ISO 12676:2003 Refractory products - Determination of resistance to carbon monoxide
NF A20-404:1984 Chemical analysis of iron ores. Determination of carbon dioxyde.
NF EN 125000:2000 Spécification générique : noyaux réalisés à partir de matériaux ferrites
NF T51-802:2004 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide.
NF T31-002:1986 Pigments. Iron oxide pigments. Specifications.
NF EN ISO 14855-2:2018 Détermination de la biodégradabilité aérobique ultime des matériaux plastiques dans des conditions contrôlées de compostage - Méthode par analyse du dioxyde de carbone libéré - Partie 2 : mesurage gravimétrique du dioxyde de carbone libéré...
NF EN ISO 22526-2:2021 Plastiques - Empreinte carbone et environnementale des plastiques biosourcés - Partie 2 : empreinte carbone des matériaux, quantité (masse) de CO2 captée dans l'air et incorporée dans les molécules de polymères
NF EN 16449:2014 Produits en bois et dérivés du bois - Calcul du contenu en carbone biogénique du bois et conversion en dioxyde de carbone
NF A06-301:1989 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen.
F00-003:1987 Railway material in general. Density of materials.
NF EN ISO 14852:2021 Évaluation de la biodégradabilité aérobie ultime des matériaux plastiques en milieu aqueux - Méthode par analyse du dioxyde de carbone libéré
NF B53-861*NF EN 16449:2014 Wood and wood-based products - Calculation of the biogenic carbon content of wood and conversion to carbon dioxide
NF T51-803-2:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2 : gravimetric measurement of carbon dioxide evolved in a laboratory-scale test.
NF T51-804*NF EN ISO 17556:2019 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
NF EN ISO 17556:2019 Plastiques - Détermination de la biodégradabilité aérobie ultime des matériaux plastiques dans le sol par mesure de la demande en oxygène dans un respiromètre ou de la teneur en dioxyde de carbone libéré
NF T51-814*NF EN ISO 19679:2020 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide
NF T51-821-1*NF EN ISO 23977-1:2021 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1 : method by analysis of evolved carbon dioxide
NF A95-348*NF EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
NF EN ISO 1248:2008 Pigments à base d'oxydes de fer - Spécifications et méthodes d'essai
NF T51-804:2012 Plastics - Determination of the ultimate aerobic biodegradability of plastics materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved.
NF B49-421:1990 Refractory products. Chemical analysis of aluminous, siliceous, silicon carbide, carbon and metallic silicon refractory products.
NF EN ISO 23977-1:2021 Plastiques - Détermination de la biodégradation aérobie des matières plastiques exposées à l'eau de mer - Partie 1 : méthode par analyse du dioxyde de carbone dégagé
NF T51-802*NF EN ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
NF B49-423-2*NF EN ISO 21068-2:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 2 : determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon.
UTE C93-331/AM2U*UTE C93-331/AM2:1975 COMPONENTS FOR ELECTRONIC EQUIPMENT. MAGNETIC COMPONENTS AND FERRITE MATERIALS. INDUCTOR OF LOW SELF-INDUCTANCE VALUE.
NF A04-111:1980 Iron and steel. Micrographic determination of the extent of decarburisation of non alloy high carbon steel wire rod.
NF T31-002*NF EN ISO 1248:2008 Iron oxide pigments - Specifications and methods of test

Indonesia Standards, Iron oxide carbon material

SNI 07-3033-1992 Carbon steel blooms and billets for forgings

Professional Standard - Electron, Iron oxide carbon material

SJ/T 10410-2002 Permanent ferrite materials
SJ/T 10410-2016 Permanent ferrite materials
SJ/T 10410-1993 Permanent ferrite material
SJ/T 1766-1997 Soft ferrite material classification
SJ/T 1766-2013 Classification of soft ferrite materials
SJ 20805-2001 General specification for gyromagnetic ferrite materials
SJ 20966-2006 Measuring methods for soft ferrite materials
SJ 2268-1983 Series of gyromagnetic multi-crystal materials made of magnetic oxides
SJ/T 11075-1996 Methods for chemical analysis of raw materials used in ferrites
SJ/T 10411-2002 Physical analysis methods for permanent ferrite materials
SJ/T 9569.6-1995 Quality grading standard for permanent ferrite materials
SJ/T 10411-1993 Physical analysis method of permanent ferrite material
SJ 2565-1985 Series and measuring methods for material made of magnetic oxides for magnetic heads
SJ/T 10213-1991 TYPe designation System for ferrite materals and conponents
SJ/T 10412-2002 Permanent ferrite powder
SJ/T 11265-2002 Soft ferrite powder
SJ/T 10412-1993 Permanent magnet ferrite powder
SJ/T 11265-2019 Soft ferrite powder
SJ/T 1505-1997 Chemical analysis methods for products and semifinished products made of gyromagnetic ferrite materials
SJ/T 10214-1991 Measuring method for demagnetized state permeability of microwave ferrite materials
SJ/T 9072.3-2013 Soft ferrite cores terms and definitions - Part 3: Guidelines for information on ferrite materials in manufacturers' catalogs of transformer and inductor cores

IT-UNI, Iron oxide carbon material

UNI 5381-1970
UNI 5479-1970
UNI 6454-1969
UNI 6455-1969
UNI 4460-1960
UNI 6878-1971
UNI 3709-1956
UNI 6456-1969
UNI 6460-1969
UNI EN ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
UNI 7410-1975

未注明发布机构, Iron oxide carbon material

UNI 5381 Heat treatment of ferrous materials. carburization
GJB 4410-2002 General specification for gyromagnetic ferrite materials
BS EN ISO 22526-2:2021(2022) Plastics — Carbon and environmental footprint of biobased plastics Part 2 : Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
BS EN ISO 22404:2021(2022) Plastics — Determination of the aerobic biodegradation of non - floating materials exposed to marine sediment — Method by analysis of evolved carbon dioxide
BS EN ISO 23977-1:2021(2022) Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater Part 1 : Method by analysis of evolved carbon dioxide
SAE AMS3970/6-2016 Carbon Faber Fabric Repair Prepreg, 120 °C (205 \MDF)Vacuum Curing - Part 6: Material Specification: Carbon Fiber Fabric Reinforced Epoxy Prepreg for Repair, Plain Weave Fabric, 190 g/m<(hoch)2>, Adhesive Film for Repair and Non-Structural Glass Fiber Fab
BS EN ISO 1248:2008(2010) Iron oxide pigments — Specifications and methods of test

RO-ASRO, Iron oxide carbon material

STAS 10918-1977 Fcromagnetic oxide materials.FERRITE SQUARE CORES (RM) Dimensions
STAS 6632/2-1980 INORGANIC PIGMENTS Iron oxide based pigments RED IRON OXIDE
STAS 6632/4-1983 Inorganic pigments Iron oxide based pigments BLACK IRON OXIDE
STAS 10097-1988 FERROMAGNETIC OXIDE MATERIALS HODS. SLABS AND GYLINDRJCALTRUNCATED BARS OF EERR ITE FOR AEBIALS Shapes and dimensions
STAS 6632/3-1991 Inorganic pigments iron oxide base pigments yellow iron oxide
STAS 166/5-1972 SILICA-ALUMINA REFRACTORIES Detcrmination of iron trioxide
STAS 8599-1970 REFRACTORY MATERIALS Determination of the resistance to disintegration in carbon monoxide medium
STAS 9281/6-1974 SILICON CARBIDE REFRACTORIES Determination of aluminium Irioxyde content
SR 3832-3-1997 Natural and artificial pozzolanic materials. Determination of ferric oxide and aluminium oxide
STAS 6266-1963
STAS 10098-1988 FERROMA GNETIC OXIDE MATERLALS FERRITE CYLINDER AND TUBE CORES Shapes and dimensions
STAS 5781/3-1980 DOLOMITICAL RKl-RACTORY PRODUCTS Dctermination of iron trioxide and aluminiuin trioxide content
SR 5063/9-1993 Silicon carbide. Determination of iron trioxide content
STAS 167/6-1970 QUARTZITE AND SII.ICA REFBACTORIES Determination of iron trioxide
STAS 5425/4-1975 CHROME AND CHROME —MAGNESITE REFRACTORIES Determination of iron trioxide content
STAS 2905-1981 SOLID FUELS Delermination of carbon, hydrogen and oxygen
STAS 1574/18-1975 IRON ORES AND CONCENTRATES Determination of carbon dioxide content
STAS 9281/7-1992 Silicon carbide refractoris. Determination of iron trioxyde content
STAS 4605/5-1972 NON-METAL BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of iron triox'de
STAS 9281/3-1973 SILICON CARBIDE REFRACTORIES DeLerniinalion of free carbon
STAS 10099-1975 FEROMAGNETIC OXIDE MATERIALS Calculation of the effective parameters of magnetic piece parts
STAS 6632/1-1971 Inorganic pigments IRON OXIDE BASED PIGMENTS Classification and designation
STAS 9281/4-1991 Carborundic refractory materials. Silicon carbide content determination

Korean Agency for Technology and Standards (KATS), Iron oxide carbon material

KS D 2362-1999(2019) Soft ferrite material classification
KS C IEC 61332-2017(2022) Soft ferrite material classification
KS D 2362-1999 Soft ferrite material classification
KS C IEC 61332:2017 Soft ferrite material classification
KS F 2610-2007(2017) Measuring method of carbon dioxide permeability for building materials
KS F 2610-2007 Measuring method of carbon dioxide permeability for building materials
KS L 3407-2010 High purity graphite materials
KS L 3407-1980 High purity graphite materials
KS M ISO 9055:2004 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of sulfur content by the bomb method
KS M ISO 9055:2013 Carbonaceous materials for the production of aluminium－Pitch for electrodes－Determination of sulfur content by the bomb method
KS E ISO 4696-1:2008 Iron ores for blast furnace feedstocks-Determination of low-temperature reduction-disintegration indices by static method-Part 1:Reduction with CO, CO2, H2 and N2
KS E ISO 4696-1:2017 Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by static method－Part 1：Reduction with CO, CO2, H2 and N2
KS M ISO 17556:2020 Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
KS M ISO 17556:2015 Plastics－Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
KS M ISO 12981-1:2004 Carbonaceous materials used in the production of aluminium-Calcined coke-Determination of the reactivity to carbon dioxide-Part 1:Loss in mass method
KS M ISO 12981-1:2013 Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of the reactivity to carbon dioxide－Part 1：Loss in mass method
KS M 3153-1997 POLYCARBONATE MOULDING MATERIALS
KS M 3153-1982 POLYCARBONATE MOULDING MATERIALS
KS M ISO 14852-2009(2019) Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium－Method by analysis of evolved carbon dioxide
KS M ISO 12988-1:2004 Carbonaceous materials used in the production of aluminium-Baked anodes-Determination of the reactivity to carbon dioxide-Part 1:Loss in mass method
KS M ISO 12988-1:2013 Carbonaceous materials used in the production of aluminium－Baked anodes－Determination of the reactivity to carbon dioxide－Part 1：Loss in mass method
KS D ISO 4518:2012 Metallic coatings-Measurement of coating thickness-Profilometric method
KS M ISO 17556:2010 Plastics-Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
KS M ISO 12981-1-2004(2009) Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of the reactivity to carbon dioxide－Part 1：Loss in mass method
KS M ISO 12988-1-2004(2009) Carbonaceous materials used in the production of aluminium－Baked anodes－Determination of the reactivity to carbon dioxide－Part 1：Loss in mass method
KS F 4708-2002 Basic magnesium carbonate heat insulating material
KS F 4708-1987 Basic magnesium carbonate heat insulating material
KS F 4708-2023 Basic magnesium carbonate heat insulating material
KS D ISO 4498-2-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness-Part 2：Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
KS M ISO 12988-2:2010 Carbonaceous materials used in the production of aluminium-Baked anodes-Determination of the reactivity to carbon dioxide-Part 2:Thermogravimetric method
KS M ISO 12988-2:2013 Carbonaceous materials used in the production of aluminium－Baked anodes－Determination of the reactivity to carbon dioxide－Part 2：Thermogravimetric method
KS L ISO 21068-2:2012 Chemical analysis of silicon-carbide-containing raw materials and refractory products－Part 2：Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon
KS M ISO 1248:2013 Iron oxide pigments — Specifications and methods of test
KS M ISO 1248-2013(2018) Iron oxide pigments — Specifications and methods of test
KS E ISO 925:2007 Solid mineral fuels－Determination of carbonate carbon content－Gravimetric method

KR-KS, Iron oxide carbon material

KS C IEC 61332-2017 Soft ferrite material classification
KS F 2610-2022 Standard test method for carbon dioxide permeability for building materials
KS M ISO 17556-2020 Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
KS M ISO 12988-2-2010 Carbonaceous materials used in the production of aluminium－Baked anodes－Determination of the reactivity to carbon dioxide－Part 2：Thermogravimetric method
KS M ISO 1248-2013(2023) Iron oxide pigments — Specifications and methods of test

Danish Standards Foundation, Iron oxide carbon material

DS/EN 25923:1994 Fire protection. Fire extinguishing media. Carbon dioxide
DS/EN 61332:2006 Soft ferrite material classification
DS/EN 125000:1998 Generic specification: Cores made of ferrite materials
DS/EN 14397-2:2004 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
DS/EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
DS/ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium – Method by analysis of evolved carbon dioxide
DS/EN ISO 17556:2012 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
DS/ISO 23977-1:2020 Plastics – Determination of the aerobic biodegradation of plastic materials exposed to seawater – Part 1: Method by analysis of evolved carbon dioxide
DS/EN ISO 14852:2004 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
DS/EN ISO 1248/AC:2009 Iron oxide pigments - Specifications and methods of test
DS/EN ISO 1248:2008 Iron oxide pigments - Specifications and methods of test

Group Standards of the People's Republic of China, Iron oxide carbon material

T/CCPA 42-2023 Low-carbon sulfur-aluminum-ferric cementitious materials
T/CECA 36-2020 Sintering permanent ferrite materials
T/CECA 72-2022 Gyromagnetic polycrystalline ferrite materials
T/CSTM 01105-2023 Test methods for the oxidation resistance of carbon-containing refractories
T/NAIA 0173-2022 Hard Carbon Anode Material
T/CSAE 208-2021 Technical specification of epoxy resin for carbon fiber reinforced composite car floor
T/CIECCPA 014-2022 Carbon dioxide capture equipment of steel lime kiln flue gas
T/QGCML 1155-2023 Ferrite permanent magnet material wet pressing magnetic field forming fully automatic hydraulic machine
T/QGCML 1219-2023 Ferrite permanent magnet material wet pressing magnetic field forming fully automatic hydraulic machine
T/ZZB 2323-2021 Permanent ferrite powder for injection
T/ZZB 2319-2021 Nano-scale transparent iron oxide pigments
T/ZZB 1832-2020 Strontium ferrite powder for bonded magnet
T/ZZB 1943-2020 Special iron oxide yellow pigment for tobacco

International Electrotechnical Commission (IEC), Iron oxide carbon material

IEC 61332:2016 Soft ferrite material classification
IEC 61332:1995 Soft ferrite material classification
IEC 61332:2005 Soft ferrite material classification

British Standards Institution (BSI), Iron oxide carbon material

BS EN 61332:2005 Soft ferrite material classification
BS EN 61332:2017 Soft ferrite material classification
BS EN 14397-2:2004 Fertilizers and liming materials - Determination of carbon dioxide - Method for liming materials
BS 3981:1976 Specification - Iron oxide pigments for paints
BS EN ISO 14852:2018 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
BS EN ISO 14852:1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
BS EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Sampling and preparation of steel samples for oxygen determination
BS EN ISO 23977-1:2021 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater - Method by analysis of evolved carbon dioxide
BS EN ISO 22526-2:2021 Plastics. Carbon and environmental footprint of biobased plastics - Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
BS EN 10036:1991 Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
BS EN 10036:1991(1999) Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
BS EN ISO 17556:2012 Plastics. Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
BS ISO 23977-1:2020 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Method by analysis of evolved carbon dioxide
BS EN ISO 19679:2020 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
BS ISO 12988-2:2004 Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Thermogravimetric method
BS EN 16449:2014 Wood and wood-based products. Calculation of the biogenic carbon content of wood and conversion to carbon dioxide
BS EN ISO 21068-2:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon
20/30408882 DC BS EN ISO 14852. Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
BS EN ISO 14852:2021 Tracked Changes. Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
BS EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
BS ISO 19679:2016 Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
19/30399400 DC BS EN ISO 19679. Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
20/30399388 DC BS ISO 23977-1. Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1. Method by analysis of evolved carbon dioxide
BS EN ISO 4507:2000 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
BS EN ISO 22404:2021 Plastics. Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment. Method by analysis of evolved carbon dioxide
BS EN 14047:2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
BS EN 14047:2002 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
BS EN ISO 17556:2019 Tracked Changes. Plastics. Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
BS EN ISO 1248:2008 Iron oxide pigments - Specifications and methods of test
BS ISO 4507:2000 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test

German Institute for Standardization, Iron oxide carbon material

DIN EN 61332:2017-07 Soft ferrite material classification (IEC 61332:2016); German version EN 61332:2017 / Note: DIN EN 61332 (2006-07) remains valid alongside this standard until 2019-12-23.
DIN EN 125000:1998-11 Generic specification - Cores made of ferrite materials; German version EN 125000:1997
DIN EN 14397-2:2004-09 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials; German version EN 14397-2:2004
DIN 29971:1991-09 Aerospace; unidirectional carbon fibre-epoxy sheet and tape prepreg; technical specification
DIN EN ISO 14852:2004 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:1999); German version EN ISO 14852:2004
DIN EN 14397-1:2010-07 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers; German version EN 14397-1:2010
DIN 51947:1998 Carbonaceous materials - Terms
DIN 51947:1998-04 Carbonaceous materials - Terms
DIN 51939:2004 Testing of carbon materials - Determination of floating coke content in calcined coke - Solid materials
DIN 51726:2004 Testing of solid fuels - Determination of the carbonate carbon dioxide content
DIN EN 16449:2014-06 Wood and wood-based products - Calculation of the biogenic carbon content of wood and conversion to carbon dioxide; German version EN 16449:2014
DIN EN 14047:2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide; German version EN 14047:2002
DIN EN ISO 17556:2019-09 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2019); German version EN ISO 17556:2019
DIN EN ISO 19679:2020-11 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020); German version EN ISO 19679:2020
DIN EN ISO 14852:2021-10 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:2021); German version EN ISO 14852:2021
DIN 51726:2004-06 Testing of solid fuels - Determination of the carbonate carbon dioxide content
DIN 51076-1:1991 Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials
DIN 17022-4:1998 Heat treatment of ferrous materials - Methods of heat treatment - Part 4: Nitriding and nitrocarburizing
DIN EN 10036:1990 Chemical analysis of ferrous materials; determination of total carbon in steel and iron; gravimetric method after combustion in a stream of oxygen; German version EN 10036:1989
DIN EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination; German version EN 10276-1:2000
DIN EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers; German version EN 14397-1:2010
DIN 51914:1985 Testing of carbon materials; determination of tensile strength; solid matters
DIN EN ISO 23977-1:2022-01 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020); German version EN ISO 23977-1:2021
DIN EN ISO 14855-2:2018-12 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test (IS...
DIN 55913-2:1972 Pigments; iron oxide pigments, methods for analysis
DIN EN ISO 17556:2019 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2019)
DIN 51937:1994 Testing of carbon materials; determination of anisotropy degree; solid materials
DIN EN ISO 1248:2008 Iron oxide pigments - Specifications and methods of test (ISO 1248:2006, including Technical Corrigendum 1:2007); German version EN ISO 1248:2008
DIN EN ISO 1248:2008-06 Iron oxide pigments - Specifications and methods of test (ISO 1248:2006, including Technical Corrigendum 1:2007); German version EN ISO 1248:2008
DIN EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)English version of DIN EN ISO 4507:2007-05

TR-TSE, Iron oxide carbon material

TS 1111-1972 STEELtS AND IRON - CAKBON MATERIALS CLASSIFTCATION AND SYMBOLS

European Committee for Electrotechnical Standardization（CENELEC）, Iron oxide carbon material

EN 61332:2017 Soft ferrite material classification
EN 61332:2005 Soft Ferrite Material Classification
EN 125000:1997 Generic Specification: Cores Made of Ferrite Materials

CENELEC - European Committee for Electrotechnical Standardization, Iron oxide carbon material

EN 61332:1997 Soft Ferrite Material Classification

Japanese Industrial Standards Committee (JISC), Iron oxide carbon material

JIS K 0002:1998 Reference material -- Standard gas -- Carbon monoxide
JIS K 0003:1998 Reference material -- Standard gas -- Carbon dioxide
JIS K 5555:1991 Epoxy resin micaceous iron oxide paint
JIS K 6951:2000 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by analysis of evolved carbon dioxide
JIS K 5555:2002 Epoxy resin Micaceous Iron Oxide paint
JIS K 6955:2017 Plastics -- Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
JIS K 6719:1994 Polycarbonate moulding materials
JIS C 2502:1989 Materials for permanent magnet
JIS C 2502:1998 Materials for permanent magnet
JIS C 2502:2019 Materials for permanent magnet
JIS A 9506:1978 Basic magnesium carbonate heat insulating material
JIS K 6953:2000 Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide
JIS K 5109:2005 Iron oxide pigments -- Specifications and methods of test

CU-NC, Iron oxide carbon material

NC 04-20-1968 Determination of total carbon in ferrous materials
NC 04-69-1985 Materials Testing. Cast Iron and Steel. Determination of Carbon by Columbiometric Method
NC 84-06-1985 Refreshments. Carbonated Refreshments. Carbon Dioxide Determination
NC 54-37-1985 Construction Materials and Products. Determination of Iron Oxide (III) and Aluminum Oxide (III) in Limes and Limestones. Gravimetric Testing Method

工业和信息化部, Iron oxide carbon material

SJ/T 2268-2018 Gyromagnetic polycrystalline ferrite material series
SJ/T 10411-2016 Physical analysis method of permanent magnet ferrite materials
HG/T 5388-2018 Combustion aid titanium, iron, copper carbon-oxygen complex
HG/T 5069-2016 Transparent iron oxide pigment
SJ/T 10412-2016 Permanent magnet ferrite powder
YS/T 1417-2021 Nickel zinc ferrite composite foil
XB/T 625-2020 Chemical analysis method of rare earth composite yttrium-zirconium ceramic materials. Determination of titanium oxide, aluminum oxide, sodium oxide and iron oxide content.

CZ-CSN, Iron oxide carbon material

CSN EN 10 036-1993 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
CSN 72 6026 Cast.6-1980 Refractories. Magnesite and magnesite- -lime materials. Complexometrie determination oi ferric oxide to 2 %
CSN 44 1570 Cast.12-1972 Chemical analysis of iron ores. Determination of carbon dioxide
CSN 72 6026 Cast.5-1980 Refraotories. Magnesite and magnesite- -lime materials. Photometric determination of ferrio oxide from 0,01 to 2,5 %
CSN 44 1357-1985 Solid fuels. Determination of carbon dioxide from carbonates
CSN 44 1357-1971 Determination of carbon dioxide in solid fuels
CSN 72 6026 Cast.3-1990 Refractories. Magnesite and magnesi- te-lime materials. Determination of Si- licon dioxide. Gravimetric, photome- tric and atomic absorption methods.

Standard Association of Australia （SAA）, Iron oxide carbon material

AS 2855:2004 Paints and related materials - Micaceous iron oxide pigment
AS ISO 14852:2005 Plastic materials - Determination of the ultimate aerobic biodegradability in an aqueous medium - Method by analysis of evolved carbon dioxide
AS 1085.22:2020 Railway track materials: Alternative material sleepers
AS ISO 14855:2005 Plastic materials - Determination of the ultimate aerobic biodegradability and disintegration under controlled composting conditions - Method by analysis of evolved carbon dioxide
AS 1085.8:2002(R2013)
AS/NZS 3750.12:1996 Paints for steel structures - Alkyd/micaceous iron oxide

Professional Standard - Chemical Industry, Iron oxide carbon material

HG/T 2836-1997 Manganese carbonate for soft ferrite use
HG/T 2836-2011 Manganese carbonate for soft ferrite use
HG/T 2249-1991 Iron Oxide Yellow Pigment
HG/T 2250-1991 Iron Oxide Black Pigment
HG/T 3006-2012 Micaceous iron oxide pigments

Lithuanian Standards Office , Iron oxide carbon material

LST EN 61332-2006 Soft ferrite material classification (IEC 61332:2005)
LST EN 125000-2001 Generic specification. Cores made of ferrite materials
LST EN 14397-2-2004 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
LST EN 10036-2000 Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
LST EN 14397-1-2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
LST EN ISO 17556:2012 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2012)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Iron oxide carbon material

GB/T 13244-1991 Test method for oxidation resistance of refactories containing carbon
GB/T 29650-2013 Refractory products.Determination of resistance to carbon monoxide
GB/Z 28865-2012 Specification for anti-EMI soft ferrite materials
GB/T 9095-1988 Measurement on the carburizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T 1863-2008 Iron oxide pigments
GB/T 16555.5-1996 Chemical analysis for silicon carbide refractories--Determination of ferric oxide--o-Phenanthroline photometric method
GB/T 14265-1993 General rule of chemical analysis for hydrogen, oxygen, nitrogen, carbon and sulfur in metal's materials
GB/T 1863-1989 Iron oxide red pigments
GB/T 12143.4-1992 Method for determination of carbondioxide in carbonated soft drink
GB/Z 28870-2012 Measuring methods for anti-EMI soft ferrite materials
GB/T 9095-2008 Sintered ferrous materials,carburized or carbonitrided-Determination and verification of case-harding depth
GB/T 16555.6-1996 Chemical analysis for silicon carbide refractories--Determination of silicon dioxide
GB/T 11436-1989 Chemical analysis methods for products and semifinished products made of soft ferrite materials
GB/T 11436-2012 Chemical analysis methods for products and semi-finished products made of soft ferrite materials
GB/T 13246-1991 Refractories containing carbon--Determination of magnesium oxide content--CYDTA volumetric method
GB/T 8718-1988 The terms of carbon materials
GB/T 14667.1-1993 Powder metallurgy iron base structural materials. Part 1: Sintering iron, sintering carbon-steel, sintering copper-steel, sintering copper-modenim-steel
GB/T 30021-2013 Warp knitting carbon fiber reinforcements
GB/T 16555.4-1996 Chemical analysis for silicon carbide refractories--Determination of alumina--EDTA gas volumetric method

ES-AENOR, Iron oxide carbon material

European Committee for Standardization (CEN), Iron oxide carbon material

EN 10036:1989 Chemical Analysis of Ferrous Materials Determination of Total Carbon in Steels and Irons Gravimetric After Combustion in a Stream of Oxygen
EN 14397-2:2004 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
EN ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:2021)
EN ISO 14852:2004 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by analysis of evolved carbon dioxide
EN ISO 19679:2020 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)
EN ISO 17556:2012 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
EN ISO 22526-2:2021 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)
EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination
EN ISO 22404:2021 Plastics - Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment - Method by analysis of evolved carbon dioxide (ISO 22404:2019)
EN 14047:2002 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
EN ISO 21068-2:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon (ISO 21068-2:2008)
EN ISO 1248:2008 Iron oxide pigments - Specifications and methods of test (ISO 1248:2006 including Technical Corrigendum 1:2007)
EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)

Professional Standard - Aerospace, Iron oxide carbon material

QJ 2300-1992 Microwave Ferrite Materials and Device Series Type Spectrum
QJ 2781A-2004 Determination of the carbon content,the hydrogen content and the nitrogen contene of carbonaceous material
QJ 2691-1994 Integral felt carbon/carbon composite throat liner products
QJ 2781-1995 Method for Determination of Carbon, Hydrogen and Nitrogen Content in Carbon Materials
QJ 2331A-2014 Process technical requirements for honeycomb sandwich construction carbon/epoxy composite facing
QJ 2509-1993 Test method for ash content of carbon/carbon composite materials

Guangdong Provincial Standard of the People's Republic of China, Iron oxide carbon material

DB44/T 1349-2014 Testing specification for high-performance soft ferrite materials
DB44/T 1383-2014 Guidelines for Reporting Carbon Dioxide Emissions Information of Iron and Steel Enterprises

ES-UNE, Iron oxide carbon material

UNE-EN 125000:1997 GENERIC SPECIFICATION: CORES MADE OF FERRITE MATERIALS (Endorsed by AENOR in June of 1998.)
UNE-EN ISO 14852:2022 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:2021)
UNE-EN ISO 17556:2020 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2019)
UNE-EN ISO 19679:2021 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)
UNE-EN ISO 22526-2:2022 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)
UNE-EN ISO 23977-1:2022 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020)
UNE-EN ISO 14855-2:2019 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test (IS...
UNE-EN ISO 22404:2022 Plastics - Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment - Method by analysis of evolved carbon dioxide (ISO 22404:2019)

AENOR, Iron oxide carbon material

UNE-EN 14397-2:2005 Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials
UNE-EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
UNE-EN 16449:2014 Wood and wood-based products - Calculation of the biogenic carbon content of wood and conversion to carbon dioxide
UNE 61030:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF CARBON REFRACTORIES
UNE 61031:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE REFRACTORIES OF SILICA CARBIDE
UNE-EN ISO 17556:2013 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2012)
UNE 61015:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF ALUMINA REFRACTORIES. REFRACTORIES OF 41 TO 43 % OF ALUMINA

Taiwan Provincial Standard of the People's Republic of China, Iron oxide carbon material

CNS 13062-1992 Methods of Test for Prepreg of Carbon Fiber and Epoxy Resins
CNS 3835-1975 Iron Oxide (Pigment)
CNS 14748-2003 Method of test for fertilizers (Determination of carbon dioxide content)
CNS 13629-1996 Polycarbonate Moulding Materials
CNS 3200-1980 Materials for Permanent Magnet
CNS 5879-1980 Iron Oxide Pigments , Red and Brown

RU-GOST R, Iron oxide carbon material

GOST 26318.3-1984 Non-metallic ore materials. Methods for determination of iron oxide mass fraction
GOST 2642.5-2016 Refractories and refractory raw materials. Methods for determination of iron (III) oxide
GOST EN 14397-2-2014 Fertilizers and liming materials. Determination of carbon dioxide content. Part 2. Method for liming materials
GOST 2642.5-1997 Refractories and refractory raw materials. Methods for the determination of iron (III) oxide
GOST 2642.5-1986 Refractory materials and products. Methods for the determination of iron oxide
GOST 13997.5-1984 Zirconium containing refractory materials and products. Methods for determination of iron oxide
GOST EN 14397-1-2013 Fertilizers and liming materials. Determination of carbon dioxide content. Part 1. Method for solid fertilizers
GOST R 56659-2015 Polymer composites. Prepregs. Method for determination of gel time of carbon fiber-epoxy prepreg
GOST R 51153-1998 Aerated soft drinks and fermented bread beverages. Method for determination of carbon dioxide
GOST R 56658-2015 Polymer composites. Prepregs. Method for determination of resin flow of carbon fiber-epoxy prepreg
GOST 13455-1991 Solid mineral fuel. Methods for the determination of carbon dioxide content of the carbonates
GOST R ISO 12988-2-2017 Carbonaceous materials used in the production of aluminium. Baked anodes. Determination of the reactivity to carbon dioxide. Part 2. Thermogravimetric method
GOST 22692-1977 Carbon materials. Method for determination of ash
GOST R ISO 12981-1-2014 Carbonaceous materials for the production of aluminium. Calcined coke. Determination of the reactivity to carbon dioxide. Part 1. Loss in mass method

SE-SIS, Iron oxide carbon material

MNC 60-1981 Ferroalloys, meta/s and oxides - Alloying materials
SIS SS-EN 10 036-1989 Chemical analysis of ferrous materials — Determination of total carbon in steels and irons — Gravimetric method after combus- tion in a stream of oxygen
MNC 60 E-1981 Ferroalloys, metals and oxides - Al I oy ing materials - Summary
SIS 17 64 31-1972 Iron oxide pigments
SIS SEN 0716

IN-BIS, Iron oxide carbon material

IS 1885 Pt.12-1966

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Iron oxide carbon material

GB/T 14265-2017 General rule of chemical analysis for hydrogen,oxygen,nitrogen,carbon and sulfur in metallic materials
GB/T 34559-2017 Test method for compressive property of C/C composites
GB/T 33501-2017 Test method for tensile property of C/C composites

Professional Standard - Aviation, Iron oxide carbon material

HB 5367.4-1986 Determination method for thermal oxidation weight loss of carbon graphite sealing materials
HB 5392-1987 648/T300 epoxy carbon fiber prepreg
HB/Z 272-1995 Process requirements for stress wave riveting of carbon fiber epoxy resin composite components
HB 7772-2005 Specification for epoxy resin carbon fiber prepregs

GOSTR, Iron oxide carbon material

GOST R 57970-2017 Carbon composites. Carbon composites reinforced with carbon fiber. Classification
GOST R 58016-2017 Ceramic composites. Silicon carbide composites reinforced with silicon carbide fiber. Classification

Society of Automotive Engineers (SAE), Iron oxide carbon material

SAE AMS2980/5-2006 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Material Specification: Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin
SAE AMS2980/5A-2014 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Material Specification: Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin
SAE AMS2980/5A-2021 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin
SAE AMS3894D-1989 CARBON FIBER TAPE AND SHEET Epoxy Resin Impregnated
SAE AMS5611C-1992 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 12Cr Ferrite Controlled, Consumable Electrode Melted
SAE AMS2980B-2021 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 - Introduction
SAE AMS3138-1980 COATING MATERIALS, FLUOROCARBON ELASTOMERIC
SAE AMS3138A-1985 COATING MATERIALS, FLUOROCARBON ELASTOMERIC
SAE AMS3894C-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated
SAE AMS3970/6-2011 Carbon Faber Fabric Repair Prepreg, 120 °C (205 \MDF)Vacuum Curing - Part 6: Material Specification: Carbon Fiber Fabric Reinforced Epoxy Prepreg for Repair, Plain Weave Fabric, 190 g/m<(hoch)2>, Adhesive Film for Repair and Non-Structural Glass Fiber Fab

PL-PKN, Iron oxide carbon material

PN K02505-1993 Rolling stock. Concentration carbon monoxide and carbon dioxide emitted by pyrolysis or combustion of materials. Requirements and tests
PN E29071-1973 Insulating materials Epoxy rolled tubes

Heilongjiang Provincial Standard of the People's Republic of China, Iron oxide carbon material

DB23/T 2492-2019 Test method for content of carbon, nitrogen, hydrogen, sulfur and oxygen in graphene materials

VN-TCVN, Iron oxide carbon material

TCVN 6530-13-2008 Refractiories.Test methods.Part 13: Determination of oxidation resistance of refractories containing carbon
TCVN 7891-2008 Spinel refractories.Test-methods for determination of silicon (Ⅳ) oxide, iron (Ⅲ) oxide, aluminium oxide, calcium oxide
TCVN 6453-2008 Carbon composite implants
TCVN 7710-2007 Refractories.Magnesia carbon bricks

International Organization for Standardization (ISO), Iron oxide carbon material

ISO 14852:2018 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
ISO 14852:1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide
ISO 1248:1974 Iron oxide pigments for paints
ISO 19679:2020 Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide
ISO 12988-1:2000 Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method
ISO 12981-1:2000 Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method
ISO 14852:1999/cor 1:2005 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide; Technical Corrigendum 1
ISO 22526-2:2020 Plastics — Carbon and environmental footprint of biobased plastics — Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
ISO 9055:1988 Carbonaceous materials for the production of aluminium; pitch for electrodes; determination of sulfur content by the bomb method
ISO/CD 12981-1:2023 Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of the reactivity to carbon dioxide — Part 1: Loss in mass method
ISO 19679:2016 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide
ISO 14852:2021 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide
ISO 4507:2000 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
ISO 17556:2012 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
ISO 4507:1978 Sintered ferrous materials, carburized or carbonitrided; Determination and verification of effective case depth by the Vickers microhardness testing method
ISO 14855:1999 Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide
ISO 22404:2019 Plastics — Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment — Method by analysis of evolved carbon dioxide
ISO 12988-2:2004 Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 2: Thermogravimetric method
ISO 14855-2:2007 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO 14855-2:2018 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO 21068-2:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon
ISO 1248:2006 Iron oxide pigments - Specifications and methods of test

American Society for Testing and Materials (ASTM), Iron oxide carbon material

ASTM D3722-05(2011) Standard Specification for Natural Red and Brown Iron Oxide Pigments
ASTM B649-04 Standard Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire
ASTM D3307-10 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
ASTM D3722-05 Standard Specification for Natural Red and Brown Iron Oxide Pigments
ASTM D3307-01 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
ASTM D3307-00 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
ASTM D3307-06 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
ASTM D3307-04 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
ASTM C288-87(1997) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM C288-20 Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM C288-87(2014) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM C863-00(2016) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
ASTM D3307-08 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
ASTM C863-00(2005) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
ASTM C288-87(2002) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM C1179-91(2000) Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C863-00 Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
ASTM C863-00(2010) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
ASTM C863-00(2022) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
ASTM B649-95 Standard Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire
ASTM A499-89(1997)e1 Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails
ASTM B649-02 Standard Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire
ASTM C571-81(1990) Methods for Chemical Analysis of Carbon and Carbon-Ceramic Refractories
ASTM C1179-91(2010)e1 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C1179-91(2005) Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C1179-21 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C288-87(2009) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide

International Federation of Trucks and Engines, Iron oxide carbon material

NAVISTAR MPAPS E06-501-2014 CARBON SCRAPER RING MATERIAL

American National Standards Institute （ANSI), Iron oxide carbon material

ANSI/AWS A5.2/A5.2M:2007 Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
ANSI/ASTM C1179:2000 Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

AGMA - American Gear Manufacturers Association, Iron oxide carbon material

244.01-59-1959 Materials Nodular Lron Gear Materials

HU-MSZT, Iron oxide carbon material

Professional Standard - Building Materials, Iron oxide carbon material

JC/T 425-1991 glassy carbon material

国家建筑材料工业局, Iron oxide carbon material

JC 425-1991 glassy carbon materials

National Association of Corrosion Engineers (NACE), Iron oxide carbon material

NACE TM0192-2003 Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments Item No 21222
NACE TM0192-1992 Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments (Item No. 21222)
NACE TM0297-2002 Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials Item No. 21229
NACE TM0297-2008 Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials Item No. 21229
NACE TM0297-1997 Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials (Item No. 21229)

TH-TISI, Iron oxide carbon material

TIS 2259-2006 Micaceous iron oxide paint

Jiangsu Provincial Standard of the People's Republic of China, Iron oxide carbon material

DB32/T 3595-2019 Elemental analyzer method for the determination of carbon, hydrogen, nitrogen, sulfur and oxygen content in graphene materials

BE-NBN, Iron oxide carbon material

NBN-EN 10036-1992 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
NBN 290-1952

Professional Standard - Non-ferrous Metal, Iron oxide carbon material

YS/T 978-2014 Carbon/carbon composites guide shield of single crystal furnace
YS/T 977-2014 Carbon/carbon composites heat insulation cylinder of single crystal furnace
YS/T 792-2012 Carbon-carbon composites crucible used in single crystal furnace
YS/T 982-2014 Carbon/carbon U shape heating element of hydrogenation furnace

Military Standard of the People's Republic of China-General Armament Department, Iron oxide carbon material

GJB 2651-1996 Test method for infrared index of carbon/phenolic and carbon/epoxy prepregs
GJB 5084-2002 Specification for integrally braided carbon/carbon composite materials for throat liners

CEN - European Committee for Standardization, Iron oxide carbon material

EN ISO 19679:2017 Plastics - Determination of aerobic biodegradation of nonfloating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide
EN ISO 17556:2019 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
EN ISO 17556:2004 Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
EN ISO 14855:2004 Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions Method by analysis of evolved carbon dioxide

American Society of Mechanical Engineers (ASME), Iron oxide carbon material

ASME BPVC.II.A-2015 Materials-Part A-Ferrous Materials Specifications
ASME SEC II B SB-649-2001 Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire ASTM B649-95

Canadian General Standards Board （CGSB), Iron oxide carbon material

CGSB 1-GP-71 METH 50.10-1980 Methods of Testing Paints and Pigments Pigment Analysis Carbon Dioxide in Carbonates

GM Global, Iron oxide carbon material

GMW 15932-2011 Epoxy/Epoxide-Carbon Fiber Reinforced Unidirectional Composite Material English; Issue 1

Professional Standard - Agriculture, Iron oxide carbon material

354药典四部-2015 Pharmaceutical excipients name II carbon dioxide
380药典四部-2020 Pharmaceutical excipients name II carbon dioxide
426药典四部-2015 Pharmaceutical excipients name Liuhuahong Iron Oxide
476药典四部-2020 Pharmaceutical excipients name Liuhuahong Iron Oxide

Universal Oil Products Company (UOP), Iron oxide carbon material

UOP 712-1971 Ferrox Test for Organic Oxygen Compounds in Propylene Dichloride and Carbon Tetrachloride

YU-JUS, Iron oxide carbon material

JUS C.T7.374-1979 Protection against corroston. Oilpaint with iron oxide. II coat

North Atlantic Treaty Organization Standards Agency, Iron oxide carbon material

STANAG 1411-2006 STANDARD TO QUANTIFY THE CHARACTERISTICS OF CARBON DIOXIDE (CO2) ABSORBENT MATERIALS FOR DIVING APPLICATIONS

Professional Standard - Machinery, Iron oxide carbon material

JB/T 8063.1-1996 Method for chemical analysis of powder metallurgy materials and products Determination of carbon in iron-based materials and products (gas volumetric method)
JB/T 2934-1993 Carbon materials and products for machinery

DE-GPVA, Iron oxide carbon material

AD 2000-Merkblatt W3/3-2003 Materials for pressure vessels.Cast iron materials.Austenitic cast iron with lamellar graphite
AD 2000-Merkblatt W3/3-2013 Materials for pressure vessels.Cast iron materials.Austenitic cast iron with lamellar graphite
AD 2000-Merkblatt W3/2-2000 Materials for pressure vessels.Cast iron materials.Spheroidal-graphite cast iron non-alloy and low alloy
AD 2000-Merkblatt W3/2-2015 Materials for pressure vessels.Cast iron materials.Spheroidal-graphite cast iron non-alloy and low alloy

国家市场监督管理总局、中国国家标准化管理委员会, Iron oxide carbon material

GB/T 40388-2021 Test method for shear strength of C/C composites

NATO - North Atlantic Treaty Organization, Iron oxide carbon material

STANAG 1411-2000 Standard to Quantify the Characteristics of Carbon Dioxide (CO2) Absorbent Material for Diving Application (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phon

GM North America, Iron oxide carbon material

GM GM181M-1988 Spring Materials Carbon Steel Spring Strip

Liaoning Provincial Standard of the People's Republic of China, Iron oxide carbon material

DB21/T 2071-2013 Determination method of total carbon in magnesia carbonaceous refractories

CL-INN, Iron oxide carbon material

INDITECNOR 21-10ch-1956

Professional Standard - Petroleum, Iron oxide carbon material

SY/T 6618-2005 Specification for log data processing and Interpretation of the carbon/oxygen
SY 6618-2005 Specifications for processing and interpretation of carbon-oxygen ratio logging data

Shanxi Provincial Standard of the People's Republic of China, Iron oxide carbon material

DB14/T 1288-2016 Technical specifications for carbon dioxide fertilization in plastic greenhouses