ZH
RU
ES

Corrosion potential and corrosion current

Corrosion potential and corrosion current, Total:499 items.

In the international standard classification, Corrosion potential and corrosion current involves: Corrosion of metals, Iron and steel products, Electrical engineering in general, Surface treatment and coating, Materials for aerospace construction, Shipbuilding and marine structures in general, Aerospace electric equipment and systems, Construction of railways, Nuclear energy engineering, Non-ferrous metals, Electrical wires and cables, Environmental testing, Solar energy engineering, Vocabularies, Machine tools, Coatings and related processes used in aerospace industry, Electrical accessories, Welding, brazing and soldering, Transformers. Reactors, Insulating fluids, Test conditions and procedures in general, Construction materials, Petroleum, petroleum products and natural gas handling equipment, Fasteners for aerospace construction, Testing of metals, Conducting materials, Insulating materials, Electromechanical components for electronic and telecommunications equipment, Fasteners, Components and accessories for telecommunications equipment, Waxes, bituminous materials and other petroleum products, Company organization and management, Audio, video and audiovisual engineering, Wind turbine systems and other alternative sources of energy, Medical equipment, Electronic components in general, Switchgear and controlgear, Aerospace fluid systems and components, Civil engineering in general, Protection against fire, Insulation, Rotating machinery, Power stations in general, Protection against dangerous goods, Laboratory medicine, Fluid storage devices, Adhesives.

American Society for Testing and Materials (ASTM), Corrosion potential and corrosion current

ASTM G192-08(2014) Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM G192-08 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM G71-81(2003) Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G116-99 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
ASTM G116-99(2004) Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
ASTM G69-97(2003) Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G69-97 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G69-20 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G82-98(2003) Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
ASTM G82-98 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
ASTM G71-81(2009) Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G71-81(2014) Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G82-98(2009) Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
ASTM G192-08(2020)e1 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM C876-22b Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
ASTM B380-97(2002) Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
ASTM C876-15 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
ASTM B576-94(1999) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
ASTM G102-89(2004)e1 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
ASTM D1275-96a Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils
ASTM G71-81(1998)e1 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G116-99(2010) Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
ASTM G116-99(2020)e1 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
ASTM G102-23 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
ASTM G71-81(2019) Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM D1275-03 Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils
ASTM D1275-06 Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils
ASTM D1275-15 Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
ASTM D3482-07a(2014) Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives

International Telecommunication Union (ITU), Corrosion potential and corrosion current

ITU-T L.81-2009 Monitoring systems for outside plant facilities
ITU-T L.8 FRENCH-1988 CORROSION CAUSED BY ALTERNATING CURRENT
ITU-T L.8 SPANISH-1988 CORROSION CAUSED BY ALTERNATING CURRENT

AENOR, Corrosion potential and corrosion current

UNE 57101:2006 Paper and board. Determination of potential of corrosion.
UNE-EN 50162:2005 Protection against corrosion by stray current from direct current systems
UNE 112083:2010 Measurement of free corrosion potential on steel reinforced concrete structures
UNE-EN ISO 17864:2009 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
UNE-EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
UNE 83952:2008 Concrete durability. Water for mixing and aggresives waters. Determination of the pH. Potentiometric method.
UNE-EN 3769:1997 AEROSPACE SERIES. ELECTROLYTIC POLISHING OF CORROSION RESISTING STEELS AND HEAT RESISTING ALLOYS.
UNE 112022:1993 METALLIC COATINGS. ELECTRODEPOSITED CHROMIUM COATINGS. ELECTROLYTIC CORROSION TESTING (EC TEST).

German Institute for Standardization, Corrosion potential and corrosion current

DIN 50918:2018-09 Corrosion of metals - Electrochemical corrosion tests
DIN 50918:1978 Corrosion of metals; electrochemical corrosion tests
DIN 50918:2018 Corrosion of metals - Electrochemical corrosion tests
DIN 50919:2016 Corrosion of metal - Corrosion investigations of bimetallic corrosion in electrolytic solutions
DIN 50919:1984 Corrosion of metal; investigations of galvanic corrosion in electrolytic solutions
DIN EN ISO 18086:2021-02 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019); German version EN ISO 18086:2020
DIN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005);English version of DIN EN ISO 17864:2008-07
DIN EN ISO 17864:2008-07 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005); German version EN ISO 17864:2008
DIN EN 50162:2005 Protection against corrosion by stray current from direct current systems; German version EN 50162:2004
DIN EN ISO 10270:2022-05 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022); German version EN ISO 10270:2022
DIN 81249-3:2012-09 Corrosion of metals in sea water and sea atmosphere - Part 3: Galvanic corrosion in sea water; Text in German and English
DIN EN ISO 17475:2008-07 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); German version EN ISO 17475:2008
DIN EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); English version of DIN EN ISO 17475:2008-07
DIN 50926:1992 Cathodic corrosion protection of fuel oil tank bottoms
DIN 50900-2:2002 Corrosion of metals - Terms - Part 2: Electrochemical terms
DIN 50958:2012 Electroplated coatings - Modified corrodkote corrosion test (mod. CORR-Test)
DIN 53489:1968 Testing of Electrical Insulating Materials; Asessing the Effect of Electrolytic Corrosion
DIN EN 2436-003:2007-04 Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance; German and English version EN 2436-003:2006
DIN EN ISO 12732:2008-07 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006); German version EN ISO 12732:2008
DIN 50961:2000 Electroplated coatings - Zinc coatings on iron and steel - Terms, testing and corrosion resistance
DIN 50961:2012 Electroplated coatings - Zinc coatings on iron or steel - Terms, testing and corrosion resistance

Korean Agency for Technology and Standards (KATS), Corrosion potential and corrosion current

KS D 0270-2007 Test methods for critical crevice temperature and/of stainless steels
KS D ISO 10270-2016(2021) Corrosion of metals and alloys－Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
KS C 0248-60-2013 Environmental testing－Part 2：Tests－ Test Ke：Flowing mixed gas corrosion test
KS D ISO 17475-2017(2022) Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D 0288-2009 Test method for corrosion of decorative electrodeposited coatings by the Corrodkote procedure
KS F 2712-2018 Standard test method for corrosion potentials of uncoated reinforcing steel in concrete
KS D 0277-2005 Standard guide for conducting and evaluating galvanic corrosion tests in electrolytes
KS D 0277-2014 Standard guide for conducting and evaluating galvanic corrosion tests in electrolytes
KS D ISO 17475:2008 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 17475:2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS M ISO 5662:2003 Petroleum products-Electrical insulating oils-Detection of corrosive sulfur
KS C IEC 60426-2008(2018) Test methods for determining electrolytic corrosion with insulating materials
KS M ISO 5662-2003(2008) Petroleum products－Electrical insulating oils－Detection of corrosive sulfur
KS M ISO 5662:2013 Petroleum products-Electrical insulating oils-Detection of corrosive sulfur
KS D 0277-2018 Standard guide for conducting and evaluating galvanic corrosion tests in electrolytes
KS D 0279-2014 Standard practice for conventions applicable to electrochemical measurements in corrosion testing
KS D 0279-2005 Standard practice for conventions applicable to electrochemical measurements in corrosion testing
KS D ISO 7539-6:2009 Corrosion of metals and alloys－Stress corrosion testing－Part 6：Preparation and use of pre-cracked specimens
KS D ISO 7539-9:2017 Corrosion of metals and alloys - Stress corrosion testing - Part 9 : Preparation and use pre-cracked specimens for tests under rising load or rising displacement
KS C 0248-60-2005 Environmental testing-Part 2:Tests- Test Ke:Flowing mixed gas corrosion test
KS D ISO 22910:2021 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature(E-CLCT) for Ti alloys fabricated via the additive manufacturing method

Association Francaise de Normalisation, Corrosion potential and corrosion current

NF EN 2357:1989 Embouts tendeurs en acier résistant à la corrosion à sertir sur câbles de commandes - Dimensions et charges
NF A05-130:2015 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria
NF A05-129*NF ISO 17093:2015 Corrosion of metals and alloys - Guidelines for corrosion test by electrochemical noise measurements
NF A05-119*NF EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
NF C17-400*NF EN 50162:2005 Protection against corrosion by stray current from direct current systems.
NF EN 50162:2005 Protection contre la corrosion due aux courants vagabonds des systèmes à courant continu
FD A05-013*FD ISO/TR 16203:2016 Corrosion of metals and alloys - Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
NF C57-106:2000 Salt mist corrosion testing of photovoltaic (PV) modules.
NF A05-327*NF ISO 17474:2012 Corrosion of metals and alloys - Conventions applicable to electrochemical measurements in corrosion testing
FD A05-313*FD ISO/TR 16208:2014 Corrosion of metals and alloys - Test method for corrosion of materials by electrochemical impedance measurements
NF A05-207*NF ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
NF A05-122*NF ISO 17752:2012 Corrosion of metals and alloys - Procedure to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
NF ISO 4905:2023 Corrosion des métaux et alliages - Méthodes d'essais électrochimiques de corrosion à haute température de matériaux métalliques dans des sels fondus
NF A05-403*NF EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements.
NF A91-119:1981 Electrodeposited chromium coatings. Electrolytic corrosion testing. (EC test).
NF A05-172*NF ISO 18089:2016 Corrosion of metals and alloys - Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
NF M87-360*NF EN ISO 21857:2021 Petroleum, petrochemical and natural gas industries - Prevention of corrosion on pipeline systems influenced by stray currents
NF L58-100-402*NF EN 2349-402:2007 Aeospace series - Requirements and test procedures for relays and contactors - Part 402 : corrosion, salt spray
NF EN ISO 21857:2021 Industries du pétrole, de la pétrochimie et du gaz naturel - Prévention de la corrosion sur les systèmes de conduites soumis à l'influence de courants vagabonds

未注明发布机构, Corrosion potential and corrosion current

BS EN 50162:2004(2005) Protection against corrosion by stray current from direct current systems
DIN EN ISO 21857:2022 Petroleum, petrochemical and natural gas industries – prevention of corrosion on piping systems caused by stray currents
DIN EN 12330:2000 Corrosion protection of metals Galvanic cadmium coatings on iron materials
GJB 9440-2018 Specification for corrosion-resistant electromagnetic shielding paint for shipboard radar cabinets

Danish Standards Foundation, Corrosion potential and corrosion current

DS/EN 50162:2004 Protection against corrosion by stray current from direct current systems
DS/ISO 18086:2021 Corrosion of metals and alloys – Determination of AC corrosion – Protection criteria
DS/ISO 23449:2020 Corrosion of metals and alloys – Multielectrode arrays for corrosion measurement
DS/EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
DS/EN ISO 18086:2021 Corrosion of metals and alloys – Determination of AC corrosion – Protection criteria (ISO 18086:2019)
DS/EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
DS/EN 3769:1997 Aerospace series - Electrolytic polishing of corrosion resisting steels and heat resisting alloys
DS/EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
DS/ISO 21857:2021 Petroleum, petrochemical and natural gas industries – Prevention of corrosion on pipeline systems influenced by stray currents
DS/ISO 7539-9:2021 Corrosion of metals and alloys – Stress corrosion testing – Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
DS/EN 2435-003:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance
DS/EN 2436-003:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance

Lithuanian Standards Office , Corrosion potential and corrosion current

LST EN 50162-2005 Protection against corrosion by stray current from direct current systems
LST EN ISO 18086:2021 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019)
LST EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
LST EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
LST EN 3769-2001 Aerospace series - Electrolytic polishing of corrosion resisting steels and heat resisting alloys
LST EN 2435-003-2006 Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance
LST EN 2436-003-2006 Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance

International Organization for Standardization (ISO), Corrosion potential and corrosion current

ISO 23449:2020 Corrosion of metals and alloys — Multielectrode arrays for corrosion measurement
ISO 22858:2020 Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
ISO/TR 16203:2016 Corrosion of metals and alloys - Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
ISO 17864:2005 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
ISO 10270:2022 Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
ISO 17475:2005 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
ISO 17474:2012 Corrosion of metals and alloys - Conventions applicable to electrochemical measurements in corrosion testing
ISO/TR 16208:2014 Corrosion of metals and alloys - Test method for corrosion of materials by electrochemical impedance measurements
ISO 17093:2015 Corrosion of metals and alloys - Guidelines for corrosion test by electrochemical noise measurements
ISO 4539:1980 Electrodeposited chromium coatings; Electrolytic corrosion testing (EC test)
ISO 17752:2012 Corrosion of metals and alloys - Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
ISO 4905:2023 Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts
ISO 17475:2005/cor 1:2006 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements; Technical Corrigendum 1
ISO/FDIS 4631:2023 Corrosion of Metals and Alloys — Measurement of the Electrochemical Critical Localized Corrosion potential (E-CLCP) for Ti Alloys Fabricated via Additive Manufacturing Method in Simulated Biomedical Solutions
ISO 4631:2023 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions
ISO 21857:2021 Petroleum, petrochemical and natural gas industries - Prevention of corrosion on pipeline systems influenced by stray currents
ISO 5662:1978 Petroleum products; Electrical insulating oils; Detection of corrosive sulphur
ISO 7539-6:2011 Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
ISO 5662:1997 Petroleum products - Electrical insulating oils - Detection of corrosive sulfur
ISO 7539-9:2003 Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
ISO 7539-9:2021 Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
ISO 22910:2020 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method
ISO 18089:2015 Corrosion of metals and alloys - Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
ISO/CD 23225 Nuclear Power Plants Corrosion Control Engineering Life Cycle — General Requirements
ISO/CD 23225.2:2023 Nuclear Power Plants Corrosion Control Engineering Life Cycle — General Requirements
ISO 7539-6:2003 Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement

国家市场监督管理总局、中国国家标准化管理委员会, Corrosion potential and corrosion current

GB/T 37619-2019 Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes
GB/T 40377-2021 Corrosion of metals and alloys—Determination of AC corrosion—Protection criteria
GB/T 40299-2021 Corrosion of metals and alloys—Conventions applicable to electrochemical measurements in corrosion testing
GB/T 38213-2019 Corrosion of metals and alloys—Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
GB/T 37539-2019 Requirements for fossil fuel power plant corrosion control engineering life cycle

Military Standards (MIL-STD), Corrosion potential and corrosion current

DOD A-A-54457-1991 WIRE, NONELECTRICAL, CORROSION RESISTING STEEL
DOD A-A-51297-1985 WIRE, NONELECTRICAL (CORROSION-RESISTING STEEL)
DOD A-A-53822-1989 WIRE, NONELECTRICAL (CORROSION-RESISTING STEEL, SOFT)

ES-UNE, Corrosion potential and corrosion current

UNE-EN ISO 18086:2022 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019)
UNE-EN ISO 10270:2022 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022)
UNE-EN ISO 21857:2022 Petroleum, petrochemical and natural gas industries - Prevention of corrosion on pipeline systems influenced by stray currents (ISO 21857:2021)
UNE-EN 2436-003:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance (Endorsed by AENOR in November of 2006.)
UNE-EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006) (Endorsed by AENOR in June of 2008.)

British Standards Institution (BSI), Corrosion potential and corrosion current

BS ISO 23449:2020 Corrosion of metals and alloys. Multielectrode arrays for corrosion measurement
BS EN ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
BS EN ISO 17864:2008 Corrosion of metals and alloys. Determination of the critical pitting temperature under potientiostatic control
BS EN 50162:2005 Protection against corrosion by stray current from direct current systems
BS EN 50162:2004 Protection against corrosion by stray current from direct current systems
BS PD ISO/TR 16203:2016 Corrosion of metals and alloys. Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
BS ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control
20/30382328 DC BS ISO 23449. Corrosion of metals and alloys. Multielectrode arrays for corrosion measurement
PD ISO/TR 16203:2016 Corrosion of metals and alloys. Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
BS ISO 22858:2020 Corrosion of metals and alloys. Electrochemical measurements. Test method for monitoring atmospheric corrosion
BS ISO 17474:2012 Corrosion of metals and alloys. Conventions applicable to electrochemical measurements in corrosion testing
PD ISO/TR 16208:2014 Corrosion of metals and alloys. Test method for corrosion of materials by electrochemical impedance measurements
BS ISO 17093:2015 Corrosion of metals and alloys. Guidelines for corrosion test by electrochemical noise measurements
19/30367053 DC BS ISO 22858. Corrosion of metals and alloys. Electrochemical measurements. Test method for monitoring atmospheric corrosion
BS EN 61701:2012 Salt mist corrosion testing of photovoltaic (PV) modules
BS PD ISO/TR 16208:2014 Corrosion of metals and alloys. Test method for corrosion of materials by electrochemical impedance measurements
BS ISO 4905:2023 Corrosion of metals and alloys. Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts
BS ISO 15158:2014 Corrosion of metals and alloys. Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
BS EN 3769:1997 Electrolytic polishing of corrosion resisting steels and heat resisting alloys
BS ISO 22910:2020 Corrosion of metals and alloys. Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method
BS 5735:1979 Test methods for determining electrolytic corrosion with electrical insulating materials
BS EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Flowing mixed gas corrosion test
BS EN ISO 17475:2006 Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
BS EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
BS EN ISO 21857:2021 Petroleum, petrochemical and natural gas industries. Prevention of corrosion on pipeline systems influenced by stray currents. Part 1: DC stray current
BS EN ISO 7539-9:2003 Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
BS EN ISO 7539-9:2008 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
BS EN 2435-003:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - High corrosion and fluid resistance
22/30432417 DC BS ISO 4631. Corrosion of Metals and Alloys. Measurement of the Electrochemical Critical Localized Corrosion potential (E-CLCP) for Ti Alloys Fabricated via Additive Manufacturing Method in Simulated Biomedical Solutions
BS ISO 17752:2012 Corrosion of metals and alloys. Procedures to determine runoff rates of metals from materials as a result of atmospheric corrosion
19/30367962 DC BS ISO 22910. Corrosion of metals and alloys. Measurement of the Electrochemical Critical Localized Corrosion Temperature (E-CLCT) for Stacked Ti Alloys Fabricated by the Additive Manufacturing Method
BS EN 2436-003:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - High corrosion and fluid resistance
BS EN 12330:2000 Corrosion Protection of Metals - Eletrodeposited Coatings of Cadmium on Iron or Steel
BS ISO 18089:2015 Corrosion of metals and alloys. Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
BS EN 60512-11-14:2003 Connectors for electronic equipment - Tests and measurements - Climatic tests - Flowing single gas corrosion test
BS EN ISO 7539-6:2011 Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of precracked specimens for tests under constant load or constant displacement
BS EN ISO 7539-6:2018 Corrosion of metals and alloys. Stress corrosion testing - Preparation and use of precracked specimens for tests under constant load or constant displacement
BS EN 2349-402:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 402: Corrosion, salt spray
BS EN 2349-402:2007 Aerospace series - Requirements and test procedures for relays and contactors - Corrosion, salt spray

Professional Standard-Ships, Corrosion potential and corrosion current

CB/T 3712-2013 Protection method for hull stray current corrosion
CB/T 3712-1995 The Protection Method of Ship Hull Stray Current Corrosion

Japanese Industrial Standards Committee (JISC), Corrosion potential and corrosion current

JIS G 0577:1981 Method of pitting potential measurement for stainless steels
JIS G 0592:2002 Method of determining the repassivation potential for crevice corrosion of stainless steels
JIS C 3610:1993 Steel tape armor and anti-corrosive layer for cables
JIS Z 3214 AMD 1:2007 Covered electrodes for atmospheric corrosion resisting steel (Amendment 1)
JIS T 0305:2002 Testing method for galvanic corrosion in pseudo physiological solution

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Corrosion potential and corrosion current

GB/T 37619-2019(英文版) Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes
GB/T 32550-2016 Corrosion of metals and alloys.Determination of the critical pitting temperature under potentiostatic control
GB/T 17899-2023 Corrosion of metals and alloys - Potentiodynamic measurement of pitting potential of stainless steel in sodium chloride solution
GB/T 24196-2009 Corrosion of metals and alloys.Electrochemical test methods.Cuidelines for conducting potentiostatic and potentiodynamic polarization measurements
GB/T 29088-2012 Corrosion of metals and alloys.Electrochemical potentiokinetic reactivation measurement using the double loop method
GB/T 23639-2009 Energy conservation and corrosion-resistant steel-madecable support system
GB/T 6466-1986 Electrodeposited chromium coatings--Electrolytic corrosion testing (EC test)
GB/T 6466-2008 Electrodeposited chromium coatings.Electrolytic corrosion testing (EC test)
GB/T 15333-1994 Test method for electolysis corrosion of electrical insulating adhesive tapes
GB/T 22316-2008 Test methods of corrosion resistance for electrolytic tinplate
GB/T 15748-1995 The method of galvanic corrosion test for metallic ship materials
GB/T 13671-1992 Stainless steels.Method of electrochemical test for crevice corrosion
GB/T 15555.12-1995 Solid waste--Glass electrade test--Method of corrosivity
GB/T 15748-2013 The method of galvanic corrosion test for metallic ship materials
GB/T 25961-2010 Standard test method for corrosive sulfur in electrical insulating oils
GB/T 15970.6-2007 Corrosion of metals and alloys.Stress corrosion testing.Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
GB/T 5169.35-2015 Fire hazard testing for electric and electronic products.Part 35: Corrosion damage effects of fire effluent.General guidance
GB/T 25314-2010 Requirements of corrosion management program for mechanical equipment in nuclear power plants
GB/T 27828-2011 Chemicals. Test method of in vitro skin corrosion. Transcutaneous electrical resistance test(TER)
GB/T 2951.27-1994 Test method for determining mechanical and physical properties of electric cables and wires. Corrosion spread test

GM Global, Corrosion potential and corrosion current

GMW 17026-2013 Accelerated Corrosion Laboratory Test for Galvanic Corrosion Mechanisms Issue 1; English

European Committee for Standardization (CEN), Corrosion potential and corrosion current

EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
CEN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
EN ISO 21857:2021 Petroleum, petrochemical and natural gas industries - Prevention of corrosion on pipeline systems influenced by stray currents (ISO 21857:2021)
prEN 50114-1993 Materials and size requirements for earth electrodes from the corrosion point of view
EN 12330:2000 Corrosion Protection of Metals - Eletrodeposited Coatings of Cadmium on Iron or Steel
EN 2349-402:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 402: Corrosion, salt spray
EN ISO 7539-9:2021 Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2021)

GM North America, Corrosion potential and corrosion current

GM GM6166M-2002 Heat and Corrosion Resistant Steel Electrodes
GM GM9040P-1995 EC Test Electrolytic Corrosion Test for Evaluating the Corrosion Protection Characteristics of Copper - Nickel - Chromium Electrodeposits Replaced by ASTM B 627

European Committee for Electrotechnical Standardization（CENELEC）, Corrosion potential and corrosion current

EN 50162:2004 Protection against corrosion by stray current from direct current systems

Professional Standard - Urban Construction, Corrosion potential and corrosion current

CJJ/T 49-2020 Technical standard for stray current corrosion protection of subway
CJJ 49-1992 Technical specification for stray current corrosion protection of subway

CH-SNV, Corrosion potential and corrosion current

SN EN ISO 18086:2021 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019)
VSM 10336.1-1939
VSM 12782-1977

PL-PKN, Corrosion potential and corrosion current

PN-EN ISO 18086-2021-06 E Corrosion of metals and alloys -- Determination of AC corrosion -- Protection criteria (ISO 18086:2019)
PN E05024-1992 Corrosion protection. Reduction of leakage of stray currents from traction return circuits of direct current
PN H97007-1974 Corrosion prevention Electrodeposited lead coatings on steel
PN H97011-1974 Corrosion prevention Electroplated coatings of tin on steel, copper and copper alloys
PN H01015-1972 Corrosion protection Electroplating and related processes Terminology
PN E05030-00-1990 Corrosion protection Electrochemical cathodic protection Requirements and tests
PN E05030-05-1986 Corrosion protection Cathodic protection Galvanic anodes Requirements and tests

Group Standards of the People's Republic of China, Corrosion potential and corrosion current

T/CSCP 0004-2022 Material corrosion big data evaluation technology - cumulative corrosion integral electricity method
T/CIATA 0023-2017 Anticorrosion Bracket for Steel Cable
T/CSTM 00046.12-2018 Corrosion test of low alloy structure steels Part 12: The test method of galvanic corrosion
T/CSTM 00046.15-2018 Corrosion test of low alloy structure steels -- Part 15: The test method of electrochemistry corrosion
T/CSEE 0077-2018 Technical Guidelines for Selection of Corrosion Protection Materials for Steel Towers of Transmission Lines in Heavy Corrosion Areas
T/CSTM 00046.16-2018 Corrosion test of low alloy structure steels -- Part 16: Guide for localized electrochemical corrosion test method
T/CEC 554.1～554.5-2021 Information Management of External Corrosion Sources in Power Engineering
T/CSCP 0035.12-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 12: Test Methods for Galvanic Corrosion of Low Alloy Structural Steels
T/CSCP 0035.15-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 15: Electrochemical Test Methods for Corrosion of Low Alloy Structural Steels
T/CSEE 0076-2018 Guidelines for assessment of corrosion status of steel towers for transmission lines
T/CSCP 0035.16-2017 Laboratory corrosion tests on low-alloy structural steels-Part 16: Electrochemical test methods for micro-corrosion of low-alloy structural steels
T/SHPTA 043-2023 Cable material for salt-fog resistant and torsion-resistant control cable of offshore wind power system

HU-MSZT, Corrosion potential and corrosion current

Professional Standard - Electricity, Corrosion potential and corrosion current

DL/T 2094-2020 Technical specifications for anti-corrosion grounding of AC power engineering
DL/T 1151.1～DL/T 1151.22-2012 Analytical methods for scale and corrosion products in thermal power plants
DL/T 1453-2015 Anticorrosive coating of transmission line steel tower
DL/T 901-2017 Acid-resisting materials of chimney lining for fossil fuel power plant
DL/T 2055-2019 Guidelines for Safety Assessment of Corrosion of Steel Structures for Transmission Lines
DL/T 1425-2015 Technical guidelines for corrosion protection of metal materials in substations
DL/T 1667-2016 Corrosion-resistant grounding device of stainless steel composite material in substation

Professional Standard - Electron, Corrosion potential and corrosion current

SJ/T 11506-2015 Aluminum etching solution for Integrated Circuit
SJ/T 11507-2015 Oxide coating etching buffer for integrated circuit

(U.S.) Ford Automotive Standards, Corrosion potential and corrosion current

FORD FLTM BQ 004-1-2000 CORRODKOTE TEST FOR PLATED PARTS
FORD FLTM BU 106-1-2000 COPPER CORROSION TEST - ELECTRICAL TAPE (Replaces FLTM BU 006-01)
FORD WSL-M96D33-A-1990 HOSE, REINFORCED RUBBER, FUEL RESISTANT, STATIC CONDUCTIVE

Society of Automotive Engineers (SAE), Corrosion potential and corrosion current

SAE TS333-1-1985 TS333 Test for Electrical Connectors Corrosion
SAE AMS2451/4B-2011 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
SAE AMS2451/4A-2002 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
SAE AMS2451/4E-2022 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
SAE AS3214-2006 WIRE, SAFETY-STEEL, CORROSION AND HEAT RESISTANT, AMS 5689
SAE AS9226B-2019 WIRE - STEEL, CORROSION AND HEAT RESISTANT, SAFETY, 1800 °F
SAE AMS5777D-1988 Steel, Corrosion Resistant, Covered Welding Electrodes 12.5Cr (Noncurrent: 01 Apr 1994) (Reaffirmed: 01 Jan 1998)
SAE AMS5777A-1974 WELDING ELECTRODES, COATED, STEEL, CORROSION RESISTANT 12.5Cr
SAE AMS5777-1957 WELDING ELECTRODES, COATED, STEEL, CORROSION RESISTANT 12.5Cr
SAE ARP1481-1991 CORROSION CONTROL AND ELECTRICAL CONDUCTIVITY IN ENCLOSURE DESIGN
SAE ARP1481A-2004 Corrosion Control and Electrical Conductivity in Enclosure Design
SAE AMS3377-1993 Sealing Compound, Electrically Conductive Corrosion Inhibiting
SAE AS3511A-2006 CABLE, SAFETY, KIT - CORROSION RESISTANT STEEL, UNS S30400
SAE AS3511-1993 CABLE, SAFETY, KIT - CORROSION RESISTANT STEEL, UNS S30400
SAE AS3655-2014 CABLE, SAFETY, NICKEL ALLOY, CORROSION RESISTANT (UNS N06625)
SAE AS3655A-2019 CABLE, SAFETY, NICKEL ALLOY, CORROSION RESISTANT (UNS N06625)
SAE AS3511B-2018 CABLE, SAFETY, KIT, CORROSION RESISTANT STEEL, UNS S30400
SAE AS3510A-1995 Cable, Safety, Kit - Corrosion and Heat Resistant Steel, UNS S32100
SAE AS3510A-2006 CABLE, SAFETY, KIT - CORROSION AND HEAT RESISTANT STEEL, UNS S32100
SAE AS3510-1993 CABLE, SAFETY, KIT - CORROSION, AND HEAT RESISTANT STEEL, UNS S32100
SAE AS3510B-2012 CABLE, SAFETY, KIT, CORROSION AND HEAT RESISTANT STEEL, UNS S32100
SAE AMS5785B-1953 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 29Cr - 9Ni
SAE AMS5695-1948 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 25Cr - 20Ni
SAE AMS5785-1948 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 29Cr - 9Ni
SAE AMS5785A-1951 WELDING ELECTRODES, COATED, CORROSION AND HEAT RESISTANT STEEL 29Cr - 9Ni
SAE AMS5695A-1951 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 25Cr - 20Ni
SAE AS3510C-2021 CABLE, SAFETY, KIT, CORROSION AND HEAT RESISTANT STEEL, UNS S32100
SAE AMS2451/4B-2007 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
SAE AMS5850B-2011 HONEYCOMB CORE, CORROSION AND HEAT RESISTANT STEEL Resistance Welded, Square Cell
SAE AMS5850A-1980 HONEYCOMB CORE, CORROSION AND HEAT RESISTANT STEEL Resistance Welded, Square Cell
SAE AMS5850-1961 HONEYCOMB CORE, CORROSION AND HEAT RESISTANT STEEL Resistance Welded - Square Cell
SAE AMS5850C-2000 Steel, Corrosion and Heat Resistant, Honeycomb Core Resistance Welded, Square Cell
SAE AMS5850D-2012 Steel, Corrosion and Heat-Resistant, Honeycomb Core Resistance Welded, Square Cell
SAE AMS5681-1948 WELDING ELECTRODES, COATED, CORROSION AND HEAT RESISTANT STEEL 19Cr - 9Ni - Cb
SAE AMS5691-1948 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 18Cr - 13Ni - 2Mo
SAE AMS5691A-1951 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 18Cr - 13Ni - 2Mo
SAE AMS5691B-1953 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 18Cr - 13Ni - 2Mo
SAE AMS5691C-1971 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 18Cr - 13Ni - 2.3Mo
SAE AMS5695B-1971 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 25Cr - 20Ni (SAE 30310)
SAE AMS5691D-1976 WELDING ELECTRODES, COVERED, STEEL, CORROSION AND HEAT RESISTANT 18.5Cr - 12.5Ni - 2.2Mo
SAE AMS5681A-1951 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 19Cr - 10Ni - (Cb+Ta)
SAE AMS5681B-1971 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 19.5Cr - 10.5Ni - (Cb + Ta)
SAE AS3618A-2020 CABLE, SAFETY, FERRULE, ELONGATED CORROSION AND HEAT RESISTANT STEEL, UNS S32100
SAE AS3511B-2008 Cable, Safety, Kit - Corrosion Resistant Steel, UNS S30400
SAE AIR4150-1993 Inspection of Inservice Airborne Accumulators for Corrosion and Damage
SAE AS3510B-2008 Cable, Safety, Kit - Corrosion and Heat Resistant Steel, UNS S32100
SAE AMS5684A-1951 WELDING ELECTRODES, COATED, ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 15Cr - 9Fe
SAE AMS5775C-1994 WELDING ELECTRODES, COVERED, CORROSION AND HEAT RESISTANT STEEL 16.5Cr - 4.5Ni - 2.9Mo - 0.10N
SAE AMS5783-1948 WELDING ELECTRODES, COATED, STEEL, CORROSION AND HEAT RESISTANT 19Cr - 9Ni - 1.5W - 1Cb - .5Mo
SAE AMS5684-1948 WELDING ELECTRODES, COATED, ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 16Cr - 9Fe
SAE AMS5659B-1966 STEEL BARS, FORGINGS, AND RINGS, CORROSION RESISTANT 15Cr - 5Ni - 4Cu Consumable Electrode Melted
SAE AMS5728A-1956 STEEL FORGINGS, CORROSION AND HEAT RESISTANT 16Cr - 25Ni - 6Mo Kellogg Electric Ingot Process
SAE AMS5691F-1994 STEEL WELDING ELECTRODES, COVERED, CORROSION AND HEAT RESISTANT 18.5Cr - 12.5Ni - 2.5Mo
SAE AMS5695E-1988 STEEL WELDING ELECTRODES, COVERED, CORROSION AND HEAT RESISTANT 25Cr - 20Ni (SAE 30310)
SAE AMS5695C-1979 STEEL WELDING ELECTRODES, COVERED, CORROSION AND HEAT RESISTANT 25Cr - 20Ni (SAE 30310)
SAE AMS5695D-1982 STEEL WELDING ELECTRODES, COVERED, CORROSION AND HEAT RESISTANT 25Cr - 20Ni (SAE 30310)
SAE AMS5827-1962 WELDING ELECTRODES, COATED STEEL, CORROSION RESISTANT 16.9Cr - 4.8Ni - 0.2(Cb + Ta) - 3.5Cu
SAE AMS5827A-1967 WELDING ELECTRODES, COATED STEEL, CORROSION RESISTANT 16.4Cr - 4.8Ni - 0.22 (Cb + Ta) - 3.6Cu
SAE ARP4150-1996 Procedure for Inspection of Inservice Airborne Accumulators for Corrosion and Damage
SAE AMS5783E-1987 Steel Welding Electrodes, Covered, Corrosion and Heat Resistant, 19.5Cr 8.8Ni 0.50Mo 1.5W 1.0Cb (Reaffirmed: 01 Jan 1991) (Noncurrent: 01 Mar 1994)
SAE AMS5797D-2002 Cobalt Alloy, Corrosion and Heat-Resistant, Covered Welding Electrodes 51.5Co - 20Cr - 10Ni - 15W UNS W73605
SAE AMS5775-1959 WELDING ELECTRODES, COATED, STEEL, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.1N
SAE AMS5797-1952 WELDING ELECTRODES, COATED, ALLOY, CORROSION AND HEAT RESISTANT Cobalt Base - 20Cr - 10Ni - 15W
SAE AMS5787-1956 WELDING ELECTRODES, COATED, ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 4.5Cr - 24.5Mo - 5.5Fe
SAE AMS5681D-2011 WELDING ELECTRODES, COVERED, STEEL, CORROSION AND HEAT RESISTANT 19.5Cr - 10Ni - 0.60(Cb + Ta)
SAE AMS5681C-1979 WELDING ELECTRODES, COVERED, STEEL, CORROSION AND HEAT RESISTANT 19.5Cr - 10.5Ni - 0.60(Cb + Ta)
SAE AMS5741B-1960 STEEL, CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Consumable Electrode Vacuum Melted
SAE AMS5741A-1959 STEEL, CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Consumable Electrode Vacuum Melted
SAE AMS5741-1959 STEEL, CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Consumable Electrode Vacuum Melted
SAE AS8690-4-2019 AS8690-699 WASHER, CUP, LOCK Unified Sizes, Corrosion Resisting Steel, Unplated

Professional Standard - Energy, Corrosion potential and corrosion current

NB/T 20543-2019 Guidelines for Corrosion Management in Nuclear Power Plants
NB/T 31006-2011 Technical code for anticorrosion of offshore wind farm steel structures
NB/T 25033-2014 Guidelines for screening flow accelerated corrosion sensitive pipe of conventional island for pressurized water reactor nuclear plant
NB/T 10597-2021
NB/T 20221-2013 Corrosion inspection of secondary thermodynamic equipments of pressure water reactor nuclear power plant
NB/T 25008-2011 Anticorrosion and antifouling of seawater cooling system in nuclear power plant

RU-GOST R, Corrosion potential and corrosion current

GOST 9.914-1991 Unified system of corrosion and ageing protection. Corrosion-resistant austenitic steels. Electrochemical methods for determination of intercrystalline corrosion resistance
GOST 25331-1982 Electrodischarge machining. Terms and definitons
GOST 15954-1970 Electro-erosion copy-piercing machines. Basic dimensions
GOST R 9.604-2021 Unified system of corrosion and ageing protection. Electrochemical protection. Protection devices of underground metallic structures against corrosion by induced AC. General specifications
GOST 24953-1981 Electroerosion copy-piersing machines. Standards of accuracy
GOST 27597-1988 Electronics items. Corrosion resistance evaluation method
GOST 25188-1982 Electrical contacts. Erosion resistance testing under electrical arc conditions
GOST 16149-1970 Protection of underground structures against stray current corrosion by polarized protectors. Technical requirements
GOST 27426-1987 Test methods for determining electrolytic corrosion with insulating materials
GOST 30098-1993 Electroerosion copy piercing machines. Basic dimensions. Standards of accuracy

CU-NC, Corrosion potential and corrosion current

NC 12-04-51-1988 Standards System for Protection Against Corrosion. Corrosion of Concrete Reinforcing Steel Electrochemical Testing Method
NC 12-04-48-1987 Paint and Varnish Coatings. Determinación of the Deterioration Degree Through Electrical Current Intensity Measurement

National Association of Corrosion Engineers (NACE), Corrosion potential and corrosion current

NACE 35110-2010 AC Corrosion State-of-the-Art: Corrosion Rate, Mechanism, and Mitigation Requirements (Item No. 24242)
NACE RP0177-2000 Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems
NACE 10C198-1998 Corrosion of Cable Shielding for Telecommunications Cable Item No. 24198
NACE 42102-2002 Corrosion in Power and Communication Manholes
NACE SP0177-2014 Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems (Item No. 21021)
NACE 01110-2010 Stray-Current-Induced Corrosion in Reinforced and Prestressed Concrete Structures (Item No. 24241)

KR-KS, Corrosion potential and corrosion current

KS D ISO 17475-2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 17475-2023 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D 0277-2018(2023) Standard guide for conducting and evaluating galvanic corrosion tests in electrolytes
KS D ISO 22910-2021 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature(E-CLCT) for Ti alloys fabricated via the additive manufacturing method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Corrosion potential and corrosion current

GB/T 33373-2016 Anticorrision—Electrochemical protection—Terminology
GB/T 23639-2017 Energy conservation and corrosion-resistant steel-made cable support system

CZ-CSN, Corrosion potential and corrosion current

CSN 03 8370-1963 Reduction of stray current corrosive effect on underground installations (pipings, cables etc.)
CSN 38 0820-1964 Protection of lead-sheathed underground cables against corrosion due to atray currents
CSN 03 8509-1987 Protection against corrosion. Electroplated coatings of cadmium
CSN 03 8511-1987 Protection against corrosion. Electroplated coatings of zinc
CSN 03 8515-1987 Protection against corrosion. Electroplated coatings of tin
CSN 34 7010 Cast.77-1972 Tests on antieorosion protective coverings of metallic cable sheats
CSN 03 8371-1978 Corrosion protection of underground telephone cables with lead, aluminium and steel coatings
CSN 03 8514-1985 Protection against corrosion. Electrolytically deposited Ni and Cu-Ni coatings
CSN 03 8508-1990 Protection against corrosion. Electroplated coatings of chromium for technical purposes
CSN IEC 426:1993 Test methode for determining electrolytic corrosion with insulating materials

SAE - SAE International, Corrosion potential and corrosion current

SAE AS3214A-2015 Wire@ Safety-Steel@ Corrosion and Heat Resistant@ AMS 5689
SAE ARP1481-1978 Corrosion Control and Electrical Conductivity in Enclosure Design
SAE AS3511A-1995 Cable@ Safety@ Kit - Corrosion Resistant Steel@ UNS S30400 (UNS S30400)
SAE AMS2451/4C-2017 Plating@ Brush@ Cadmium Corrosion Protective@ Low Hydrogen Embrittlement
SAE AMS2451/4-1998 Plating@ Brush@ Cadmium Corrosion Protective@ Low Hydrogen Embrittlement
SAE AS3655-2009 CABLE@ SAFETY@ NICKEL ALLOY@ CORROSION RESISTANT (UNS N06625)
SAE AMS2451/4D-2017 Plating@ Brush@ Cadmium Corrosion Protective@ Low Hydrogen Embrittlement
SAE AS9226-2004 WIRE - STEEL@ CORROSION AND HEAT RESISTANT@ SAFETY@ 1800 DEGREES F
SAE AS9226A-2004 WIRE - STEEL@ CORROSION AND HEAT RESISTANT@ SAFETY@ 1800 DEGREES F
SAE AMS5850E-2018 Steel@ Corrosion and Heat-Resistant@ Honeycomb Core Resistance Welded@ Square Cell
SAE AMS5728-1951 STEEL@ CORROSION AND HEAT RESISTANT 16Cr - 25Ni - 6Mo Kellogg Electric Ingot Process
SAE AS12500-2018 Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies
SAE AS3618-2011 CABLE@ SAFETY@ FERRULE@ ELONGATED CORROSION AND HEAT RESISTANT STEEL@ UNS S32100
SAE AS3618A-2015 CABLE, SAFETY, FERRULE, ELONGATED CORROSION AND HEAT RESISTANT STEEL, UNS S32100
SAE AMS5785E-1993 Steel@ Welding Electrode@ Covered@ Corrosion and Heat Resistant 28.5Cr - 9.5Ni (UNS S64299)
SAE AMS5785D-1987 Steel@ Welding Electrode@ Covered@ Corrosion and Heat Resistant 28.5Cr - 9.5Ni (UNS W31310)
SAE AS3510C-2016 CABLE@ SAFETY@ KIT@ CORROSION AND HEAT RESISTANT STEEL@ UNS S32100
SAE AMS5659P-2014 Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu (UNS S15500)
SAE AMS5659N-2012 Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr – 4.5Ni – 0.30Cb (Nb) – 3.5Cu Consumable Remelted@ Solution Heat Treated@ Precipitation Hardenable (UNS S15500)
SAE AMS5659J-1998 Steel@ Corrosion Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb - 3.5Cu Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS S15500)
SAE AMS5659M-2008 Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr – 4.5Ni – 0.30Cb (Nb) – 3.5Cu Consumable Remelted@ Precipitation Hardenable (UNS S15500)
SAE AMS5659G-1990 Steel@ Corrosion Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb - 3.5Cu Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS S15500)
SAE AMS5659R-2015 Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu (UNS S15500)
SAE AMS5659K-1998 Steel@ Corrosion Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb - 3.5Cu Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS S15500)
SAE AMS5728B-1982 STEEL FORCINGS@ CORROSION AND HEAT RESISTANT 16Cr - 25Ni - 6Mo Hopkins Electric Ingot Process
SAE AMS5659H-1995 Steel@ Corrosion Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb - 3.5Cu Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS S15500)
SAE AMS5687N-2018 Nickel Alloy@ Corrosion and Heat-Resistant@ Wire 74Ni - 15.5Cr - 8.0Fe Annealed (UNS N06600)
SAE AMS5687L-1996 Nickel Alloy@ Corrosion and Heat Resistant@ Wire 74Ni - 15.5Cr - 8.0Fe Annealed (UNS N06600)
SAE AMS5659A-1966 STEEL BARS@ FORGINGS AND RINGS@ CORROSION RESISTANT 15Cr - 5Ni - 4Cu Consumable Electrode Melted
SAE AMS5659-1965 STEEL BARS@ FORGINGS AND RINGS@ CORROSION RESISTANT 15Cr - 5Ni - 4Cu Consumable Electrode Melted
SAE AMS5691E-1982 STEEL WELDING ELECTRODES@ COVERED@ CORROSION AND HEAT RESISTANT 18.5Cr - 12.5Ni - 2.2Mo (UNS W31610)
SAE AMS5785F-1999 Steel@ Welding Electrode@ Covered@ Corrosion and Heat Resistant 28.5Cr - 9.5Ni (UNS S64299; W31310)
SAE AMS5681E-1996 WELDING ELECTRODES@ COVERED@ STEEL@ CORROSION AND HEAT RESISTANT 19.5Cr -10Ni - 0.60 (Cb+Ta) (UNSW34710)

International Federation of Trucks and Engines, Corrosion potential and corrosion current

NAVISTAR TMS 4519-2015 VOID - Black Corrosion-Resistant Cathodic E-coat Finish
NAVISTAR MPAPS G-4519-2015 Black Corrosion-Resistant Cathodic E-coat Finish for Fasteners

Professional Standard - Aerospace, Corrosion potential and corrosion current

QJ 2188-1991 Code for anti-corrosion design of electronic equipment
QJ 1323.2-1987 Electromagnetic relay test method salt spray (corrosion) test

AWS - American Welding Society, Corrosion potential and corrosion current

A5.22-1980 SPECIFICATION FOR FLUX CORED CORROSION- RESISTING CHROMIUM AND CHROMIUM-NICKEL STEEL ELECTRODES
A5.9-1969 Specification for Corrosion-Resisting Chromium and Chromium-Nickel Steel Welding Rods and Bare Electrodes

SE-SIS, Corrosion potential and corrosion current

SIS SS-ISO 4539:1983 Electrodeposited chromium coatings- Electrolytic corrosion testing (EC-test)
SIS SS IEC 426:1982 Test methods for determining electrolytic corrosion with insulating materials
SIS SS 15 51 67-1979 Petroleum products — Electrical insulating oils — Detection of corrosive sulphur

Professional Standard - Machinery, Corrosion potential and corrosion current

JB/T 9643-2014 Corrosion-proof oil-immersed power transformers
JB/T 9643-1999 Corrosion-proof and oil-immersed type power transformer
JB/T 7576-1994 Environmental technical requirement for indoor and outdoor corrosionproof electric rotating motors

Professional Standard - Petrochemical Industry, Corrosion potential and corrosion current

SH/T 0304-1999 Electrical insulating oils.Detection of corrosive sulfur
SH/T 3200-2018 Code for design of electric power in corrosive environment of petrochemical industry
SH/T 0804-2007 Detection of corrosive sulfur of insulating oils- Silver strip test

YU-JUS, Corrosion potential and corrosion current

JUS B.H8.232-1991 Electrical insulating oils - Method for the detection of corrosive sulphur
JUS N.A5.006-1980 Test methods f'or ?etemtining electrolvtk corrosion with insulating materials

American National Standards Institute （ANSI), Corrosion potential and corrosion current

ANSI/EIA 364-26B:1999 Electric Connectors – Salt Spray Corrosion Test Procedure
ANSI/SCTE 11-2012 Test Method for Aerial Cable Corrosion Protection Flow
ANSI/ASTM B826:1996 Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
ANSI/EIA 364-113:2010 Corrosivity of Contacts Test Procedure for Electrical Connectors and Sockets

US-FCR, Corrosion potential and corrosion current

FCR NAVMAT P-4855-2-1983 Design Guidelines for Prevention & Control of Avionic Corrosion

ECIA - Electronic Components Industry Association, Corrosion potential and corrosion current

RS-364-26A-1983 TP-26A Salt Spray Corrosion Test for Electrical Connectors
EIA-364-113-2010 CORROSIVITY OF CONTACTS TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS
186-5E-1978 Passive Electronic Component Parts@ Test Methods for; Method 5: Salt Spray (Corrosion)

国家机械工业局, Corrosion potential and corrosion current

JB 9643-1999 Anti-corrosion oil-immersed power transformer

中国石油化工总公司, Corrosion potential and corrosion current

SH/T 0304-1992 Corrosive sulfur test method for electrical insulating oils

IN-BIS, Corrosion potential and corrosion current

U.S. Military Regulations and Norms, Corrosion potential and corrosion current

ARMY MIL-HDBK-1250 A VALID NOTICE 2-2006 DEPARTMENT OF DEFENSE HANDBOOK CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
ARMY MIL-HDBK-1250 A NOTICE 1-2001 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
ARMY MIL-HDBK-1250 A-1995 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES

EEMUA - Engineering Equipment and Materials Users Association, Corrosion potential and corrosion current

PUB NO 133-2011 Specification for underground armoured cable Protected against solvent penetration and corrosive attack (Edition 2)
PUB NO 133-1988 Specification for Underground Armoured Cable Protected Against Solvent Penetration and Corrosive Attack (Formerly OCMA Specification ELEC 4)

Military Standard of the People's Republic of China-General Armament Department, Corrosion potential and corrosion current

GJB 17.20-1984 Aeronautical wire and cable test methods Corrosion effect test

AT-ON, Corrosion potential and corrosion current

ONORM C 2508-1972 Projection against corrosion; electroplated copper coatings on sleel.

CO-ICONTEC, Corrosion potential and corrosion current

ICONTEC 2978-1991

Professional Standard - Chemical Industry, Corrosion potential and corrosion current

HG/T 20666-1999 Code of electrical design for chemical enterprises in corrosion atmosphere
HG/T 20666-1999（条文说明） Design code for electric power in corrosive environment of chemical enterprises

Aerospace Industries Association/ANSI Aerospace Standards, Corrosion potential and corrosion current

AIA/NAS NASM14151-1999 Washer, Flat, Round, Corrosion Resisting Steel (For Electrical Applications)

RO-ASRO, Corrosion potential and corrosion current

STAS SR 13186-1994 Electroinsulator mineral oils Determination of corrosive sulphur content
STAS 8943-1980 TURBO-JET FUEL Determination of the corrosion to silver
STAS 7335/4-1977 Non-corrosive protcction BURIED METALIC STRUCTURES Cu/CuS04 comparation electrode
STAS 9588-1974 Cables ANTI-CORROSION PROTECTIVE COVERINGS Methods for testing waterproofness
STAS 7335/8-1985 Corrosion protection of burried metal construction TEST STATIONS FOR POTENTIAL

Association of German Mechanical Engineers, Corrosion potential and corrosion current

VDI 3822 Blatt 3-2007 Failure analysis - Failures caused by corrosion in electrolytes

Professional Standard - Radio Television Film, Corrosion potential and corrosion current

GY/T 64-1989 Anticorrosive protective coatings for steel tower masts for broadcasting and television
GY 64-2010 Corrosion Protection Coating for Steel Tower Mast of Radio and Television

国家广播电影电视总局, Corrosion potential and corrosion current

GY/T 64-2010 Anti-corrosion protective coating for radio and television steel tower masts

国家能源局, Corrosion potential and corrosion current

NB/T 10626-2021 Anti-corrosion design specifications for offshore wind farm projects
NB/T 20527-2018 Guidelines for management of flow-accelerated corrosion of primary circuit piping in heavy water reactor nuclear power plants

国家广播电视总局, Corrosion potential and corrosion current

GY/T 64-2021 Anti-corrosion protective coating for radio and television steel tower masts

国家药监局, Corrosion potential and corrosion current

YY/T 1772-2021 Test methods for galvanic corrosion in electrolytes for surgical implants

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Corrosion potential and corrosion current

ASHRAE CH-99-10-6-1999 Corrosion Inhibition in Lithium Bromide Absorption Fluid for Advanced and Current Absorption Cycle Machines

TR-TSE, Corrosion potential and corrosion current

TS 2716-1977 ARC WELDING ELECTRODES (COVERED ELECTRODES) FOR STAINLESS, HEAT AND CORROSION RESISTANT STEELS

Electronic Components, Assemblies and Materials Association, Corrosion potential and corrosion current

ECA EIA-364-113-2010 TP-113 Corrosivity of Contacts Test Procedure for Electrical Connectors and Sockets

Professional Standard - Commodity Inspection, Corrosion potential and corrosion current

SN/T 2246-2009 Chemicals-In vitro skin corrosion.Transcutaneous electrical resistance test(TER)
SN/T 3009-2011 Identification of seawater corrosion on metallic surface by SEM

Electronic Components, Assemblies and Materials Association, Corrosion potential and corrosion current

ECA 186-5E-1978 Passive Electronic Component Parts, Test Methods for; Method 5: Salt Spray (Corrosion)

Canadian Standards Association (CSA), Corrosion potential and corrosion current

CSA C22.3 NO 4-1974-1974 Control of Electrochemical Corrosion of Underground Metallic Structures
CSA C22.3 NO.4-1974 Control of Electrochemical Corrosion of Underground Metallic Structures (Third Edition)

Standard Association of Australia （SAA）, Corrosion potential and corrosion current

AS 60695.5.3:2006 Fire hazard testing - Corrosion damage effects of fire effluent - Leakage-current and metal-loss test method

United States Navy, Corrosion potential and corrosion current

NAVY MIL-E-23919 A VALID NOTICE 1-1990 ELECTRODES, REFERENCE, CIRCULAR, CORROSION PREVENTIVE, (FLUSH TYPE): SILVER-SILVER CHLORIDE
NAVY MIL-E-23919 A-1983 ELECTRODES, REFERENCE, CIRCULAR, CORROSION PREVENTIVE, (FLUSH TYPE): SILVER-SILVER CHLORIDE

Taiwan Provincial Standard of the People's Republic of China, Corrosion potential and corrosion current

CNS 8795-1988 Method of Test for Copper Corrosion of Heat Shrinkable Tubing for Electrical Insulation

AIA/NAS - Aerospace Industries Association of America Inc., Corrosion potential and corrosion current

NASM14151-1999 Washer@ Flat@ Round@ Corrosion Resisting Steel (For Electrical Applications)
NASM14151-2012 WASHER@ FLAT@ ROUND@ CORROSION RESISTING STEEL (FOR ELECTRICAL APPLICATIONS) (Rev 1)

Shaanxi Provincial Standard of the People's Republic of China, Corrosion potential and corrosion current

DB61/T 1582-2022 Technical specifications for electrochemical testing of metal corrosion in oil and gas fields

GB-REG, Corrosion potential and corrosion current

REG NASA-LLIS-0315--1993 Lessons Learned ?Pressure Systems, Galvanic Corrosion, Rupture, Explosion

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Corrosion potential and corrosion current

IEEE P2655/D2-2018 Atmospheric Above Grade Inspection and Assessment of Corrosion on Steel Electrical Transmission@ Distribution@ and Substation Structures

Professional Standard - Medicine, Corrosion potential and corrosion current

YY/T 0695-2008 Standard test method for conducting cyclic potentiodynamic polarization measurements to determine the corrosion susceptibility of small lmplant devices

European Association of Aerospace Industries, Corrosion potential and corrosion current

AECMA PREN 4405-003-1996 Aerospace Series Paints and Varnishes Corrosion Resistant Chromate - Free Two Component Cold Curing Primer Part 3: High Corrosion and Fluid Resistance

BE-NBN, Corrosion potential and corrosion current

NBN T 52-156-1985 Petroleum produtcs - Electrical insulating oils - Detection of corrosive sulphur

Underwriters Laboratories (UL), Corrosion potential and corrosion current

UL SUBJECT 2419-2004 OUTLINE OF INVESTIGATION FOR ELECTRICALLY CONDUCTIVE CORROSION RESISTANT COMPOUNDS Issue Number: 1

Henan Provincial Standard of the People's Republic of China, Corrosion potential and corrosion current

DB41/T 1294-2016 Test and Evaluation of High Temperature Sulfur Corrosion of Water Wall of Power Plant Boiler

ECSS - European Cooperation for Space Standardization, Corrosion potential and corrosion current

Q-ST-70-20C-2008 "Determination of the susceptibility of silver-plated copper wire and cable to ""red-plague"" corrosion (Second Issue)"