ZH
RU
ES

Caliber glassware

Caliber glassware, Total:500 items.

In the international standard classification, Caliber glassware involves: Education, Analytical chemistry, Glass, Equipment for the chemical industry, Linear and angular measurements, Bottles. Pots. Jars, Measurement of volume, mass, density, viscosity, Thermodynamics and temperature measurements, Equipment for the glass and ceramics industries, Surface treatment and coating, Electricity. Magnetism. Electrical and magnetic measurements, Ceramics, Optical equipment, Materials and articles in contact with foodstuffs, Aerosol containers, Laboratory medicine, Vocabularies, On-board equipment and instruments, Packaging materials and accessories, Pipeline components and pipelines, Medical equipment, Pharmaceutics.

Professional Standard - Education, Caliber glassware

• JY/T 0444-2011 Lower mouth bottle of glass instrument for teaching
• JY/T 0425-2011 teaching glass instrument glass bell jar
• JY/T 0445-2011 teaching glassware glass mortar
• JY/T 0437-2011 teaching glass instrument glass piston
• JY/T 0451-2011 teaching glassware glass evaporating dish
• JY/T 0443-2011 Teaching glass instrument glass round sink
• JY/T 0446-2011 Hard glass tubes for teaching glass instruments
• JY/T 0454-2011 Teaching glassware round bottom short neck thick mouth flask
• JY/T 0433-2011 Glass instrument dropper for teaching
• JY/T 0434-2011 Teaching glass instrument drop bottle
• JY/T 0450-2011 teaching glass capillary
• JY/T 0438-2011 Gas cylinders for teaching glass instruments
• JY/T 0449-2011 Teaching glass instrument suction filter bottle
• JY/T 0432-2011 Exhaust pipe for teaching glass instruments
• JY/T 0440-2011 Teaching glass instrument crystallization dish
• JY/T 0453-2011 Glass instrument weighing bottle for teaching
• JY/T 0430-2011 Glass instrument watch glass for teaching
• JY/T 0424-2011 Teaching glass instrument alcohol lamp
• JY/T 0442-2011 Teaching glass retort
• JY/T 0452-2011 Reagent bottles for teaching glass instruments
• JY/T 0447-2011 Glass instrument specimen bottle for teaching
• JY/T 0426-2011 Teaching Glass Instrument Gas Generator
• JY/T 0441-2011 Teaching glass instrument with support test tube
• JY/T 0439-2011 Teaching glassware should be connected (tail connection)
• JY/T 0429-2011 Long-neck safety funnel for teaching glass instruments
• JY/T 0423-2011 General quality requirements and test methods for teaching glass instruments
• JY/T 0436-2011 Teaching glassware drying tube spherical and U-shaped drying tube
• JY/T 0427-2011 Tee connecting tubes for teaching glass instruments (T-shaped tubes, Y-shaped tubes, U-shaped tubes)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Caliber glassware

• GB/T 15725.1-1995 Laboratory glassware--Flask(narrow neck)
• GB/T 15725.3-1995 Laboratory glassware--Flask(wide neck)
• GB/T 15725.6-1995 Laboratory glassware--Ground flasks
• GB/T 22067-2008 Laboratory Glassware Wide Mouth Flasks
• GB/T 15725.4-1995 Laboratory glassware--Flask(multiple neck)
• GB 21549-2008 Laboratory glassware.Safe requirement of heat resisting glassware
• GB/T 42413-2023 Test method for resistance to freezing of glassware and glass containers
• GB/T 11414-2007 Laboratory glassware.Bottles
• GB/T 11414-1989 Laboratory glassware--Bottles
• GB 11414-1989 Laboratory glassware－Bottles
• GB/T 15723-1995 Laboratory glassware--Desiccator
• GB/T 12809-1991 Laboratory glassware--Principles of design and construction of volumetric glassware
• GB/T 12809-2015 Principles of design and construction of laboratory glassware glass measuring vessels
• GB/T 12803-1991 Laboratory glassware--Conical graduates
• GB/T 12804-1991 Laboratory glassware--Graduated measuring cylinders
• GB/T 15724.1-1995 Laboratory glassware--Beaker
• GB/T 12804-2011 Laboratory glassware.Graduated measuring cylinders
• GB/T 15724-2008 Laboratory glassware.Beakers
• GB/T 12803-2015 laboratory glass instrument measuring cup
• GB/T 21298-2007 Laboratory glassware.Text tubes
• GB/T 22362-2008 Laboratory glassware.Flasks
• GB/T 12805-1991 Laboratory glassware--Burettes
• GB/T 28213-2011 Laboratory glassware.Petri dishes
• GB/T 12805-2011 Laboratory glassware.Burettes
• GB/T 28212-2011 Laboratory glassware. Condensers
• GB/T 12810-1991 Laboratory glassware--Volumetric galssware--Methods for use and testing of capacity
• GB/T 15724.2-1995 Laboratory glassware--Conical beaker
• GB/T 15725.2-1995 Laboratory glassware--Kjeldahl flask
• GB/T 15726-1995 Glassware--stress examination methods
• GB/T 28211-2011 Laboratory glassware. Filter funnels
• GB/T 12807-1991 Laboratory glassware--Graduated pipettes
• GB/T 7996-2006 Norminal capacity and diameter of glass lined vessel
• GB/T 7996-2013 Norminal capacity and diameter of glass-lined equipment
• GB/T 7996-1987 Nominal volume and nominal diameter for glass-lined vessel
• GB 21749-2008 Safety requirements for the educational equipment.Vitreous equipment and attachments
• GB/T 12806-1991 Laboratory glassware-one-mark volumetric flasks
• GB/T 12808-1991 Laboratory glassware--One-mark pipettes
• GB/T 12806-2011 Laboratory glassware.One-mark volumetric flasks
• GB/T 12808-2015 Laboratory glass instrument single marked line pipette
• GB/T 17449-1998 Packaging--Glass containers--Thread finish dimensions
• GB 6579-1986 Laboratory glassware－Methods for thermal shock test
• GB/T 6579-1986 Laboratory glassware--Methods for thermal shock test
• GB/T 28214-2011 Laboratory glassware. Pipettes colour coding
• GB/T 14149-1993 Laboratory glassware--Interchangeable spherial ground joints
• GB/T 21297-2007 Laboratory glassware-Interchangeable conical ground joint
• GB/T 42222-2022 Laboratory glassware—Testing method and classification of optical uniformity
• GB/T 15725.5-1995 Laboratory glassware--Distilling flask
• GB/T 15727-1995 Methods for thermal shock test of laboratory apparatus glass(stick method)
• GB/T 6579-2007 Laborator glassware.Thermal shock and thermal shock endurance test methods
• GB/T 21408-2008 Glass plant,pipeline and fittings.Pipeline and fittings of nominal bore 15 to 150 mm.Compatibility and interchangeability

German Institute for Standardization, Caliber glassware

• DIN 12244-1:1979 Laboratory glassware; interchangeable spherical ground joints
• DIN 12622:1981 Laboratory glassware; marking of glass instruments for the determination of type of glass
• DIN 12622:1981-02 Laboratory glassware; marking of glass instruments for the determination of type of glass
• DIN 28153-2:1994 Covers for DN 100 up to DN 250 openings in glass-lined apparatuses
• DIN 12264:1977 Laboratory glassware; connections with spherical joints
• DIN EN 29885:1994 Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods (ISO 9885:1991); German version EN 29885:1994
• DIN 12591:1976 Laboratory glassware; Dimroth condenser with standard ground joints
• DIN 12581:1976 Laboratory glassware; Allihn condensers with standard ground joints
• DIN 12592:1976 Laboratory glassware; Graham condenser with standard ground joints
• DIN 12216:1975 Laboratory glassware; glass tube ends with round thread
• DIN 28153-1:1994 Covers for DN 350 450, 500 and 600 openings in glass-lined apparatuses
• DIN 12541-1:1977 Laboratory glassware; straight bore stopcocks
• DIN 12545:1977 Laboratory glassware; vacuum stopcocks
• DIN 12480:2009 Laboratory glassware - Three-neck bottles - Woulff bottles
• DIN 12770:1982 Laboratory glassware; liquid-in-glass thermometers; general requirements
• DIN 12784:1984 Laboratory glassware; thermometers with interchangeable ground joint
• DIN 12593:1976 Laboratory glassware; jacketed coil condenser with standard ground joints
• DIN 12807:1975 Laboratory glassware; Bingham pycnometer
• DIN 12340:1970 Storage dishes, low form
• DIN 12392:1978 Laboratory glassware; reaction flasks
• DIN 12394:1981 Laboratory glassware; distillation flasks
• DIN 12257:1981 Laboratory glassware; adapters
• DIN 12383:1981 Laboratory glassware; pear shape flasks
• DIN 12481:1978 Laboratory glassware; Woulff bottles with outlet at bottom
• DIN 12808:1975 Laboratory glassware; Jaulmes pycnometer
• DIN 12360:1978 Laboratory glassware; Kjeldahl flasks
• DIN 12553:1977 Laboratory glassware; double oblique bore stopcocks
• DIN 12404:1980 Laboratory glassware; gas inlet tubes
• DIN 12492:1998 Laboratory glassware - Instruments with vacuum-jacket insulation
• DIN 12594:1998-08 Laboratory glassware - Ground joint parts
• DIN 49990:1971 Electric lighting fittings (luminaires); glass globes with screw threads
• DIN 12793:1977 Laboratory glassware; range finder hydrometers
• DIN 12777:1976 Laboratory glassware; Anschuetz thermometer set
• DIN 12215:1975 Laboratory glassware; glass tube ends for hose connections, olives, capillary tube ends
• DIN 12664-1:1983 Laboratory glassware; one-mark volumetric flasks; volumetric flasks with flanged edge, conical socket and conical joint
• DIN 12554:1977 Laboratory glassware; T-bore stopcocks
• DIN 12561:1977 Laboratory glassware; straight bore burette stopcocks
• DIN 12776:1976 Laboratory glassware; Allihn thermometer set
• DIN 12594:1998 Laboratory glassware - Ground joint parts
• DIN 12799:1975 Laboratory glassware; solid stem general purpose thermometers
• DIN 12480:1978 Laboratory glassware; Woulff bottles
• DIN 12688:1976 Laboratory glassware; two-mark pipettes, adjusted to contain
• DIN 12846:1978 Laboratory glassware; hematocrit capillaries
• DIN 12785:1977 Laboratory glassware; special purpose laboratory thermometers
• DIN 12256:1977 Laboratory glassware; tightness test of conical joints, spherical joints and stopcocks
• DIN 12214:1996 Laboratory glassware - Glass tube ends and covers with laboratory flat flange - Dimensions, requirements
• DIN EN ISO 4797:2005 Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797:2004); German version EN ISO 4797:2004
• DIN 12791-1:1981 Laboratory glassware; density hydrometers; general requirements
• DIN 12803-1:1981 Laboratory glassware; alcoholometry; general requirements
• DIN 12252:1979 Laboratory glassware; interchangeable ground stoppers
• DIN 12473-1:1976 Laboratory glassware; gas sampling tubes with straight bore stopcocks
• DIN 12690:1975 Laboratory glassware; one-mark pipettes, class A and class B
• DIN 12804:1975 Laboratory glassware; densitiy hydrometers for liquefied gases of hydrocarbons
• DIN 12473-2:1976 Laboratory glassware; gas sampling tubes with V-bore stopcocks
• DIN EN ISO 9100-1:2005 Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005); German version EN ISO 9100-1:2005
• DIN EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish; German version EN 16291-2:2013
• DIN 12847-1:1984 Laboratory glassware; haemacytometer counting chambers; general requirements
• DIN EN 16291-1:2013 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish; German version EN 16291-1:2013
• DIN 12790:1979 Laboratory glassware; hydrometers, principles of construction and adjustment
• DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
• DIN 12785 Bb.1:1978 Laboratory glassware; special purpose laboratory thermometers, additional remarks
• DIN EN ISO 4796-1:2001 Laboratory glassware - Bottles - Part 1: Screw neck bottles (ISO 4796-1:2000); German version EN ISO 4796-1:2000
• DIN 12249:1977 Laboratory glassware; connections with standard ground joints
• DIN EN ISO 4797:2016-05 Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797:2015); German version EN ISO 4797:2015
• DIN EN ISO 384:2016-05 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015); German version EN ISO 384:2015
• DIN 12576:1976 Laboratory glassware; narrow jacketed, straight form condenser with standard ground joints
• DIN 12602:1977-05 Laboratory glassware; Soxhlet extractors with standard ground joints
• DIN 12555:1977 Laboratory glassware; double bore stopcocks with tail
• DIN EN ISO 9100-7:2005 Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005); German version EN ISO 9100-7:2005
• DIN 12784:1984-06 Laboratory glassware; thermometers with interchangeable ground joint
• DIN 12702:1978 Laboratory glassware; volumetric glassware for gas analysis, gas burettes, azotometers, eudiometers, nitrometers
• DIN EN ISO 13132:2011 Laboratory glassware - Petri dishes (ISO 13132:2011); German version EN ISO 13132:2011
• DIN 12775:1975 Laboratory glassware; laboratory thermometers, scale values 0,1 °C, 0,2 °C and 0,5 °C
• DIN EN ISO 9100-3:2006 Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005); German version EN ISO 9100-3:2005
• DIN EN ISO 9100-11:2005 Glass containers - Vacuum lug finishes - Part 11: 82 regular (ISO 9100-11:2005); German version EN ISO 9100-11:2005
• DIN EN ISO 9100-14:2009 Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005 + Cor. 1:2008) (includes Corrigendum AC:2009); English version of DIN EN ISO 9100-14:2009-05
• DIN EN ISO 9100-13:2005 Glass containers - Vacuum lug finishes - Part 13: 100 regular (ISO 9100-13:2005); German version EN ISO 9100-13:2005
• DIN EN ISO 9100-10:2005 Glass containers - Vacuum lug finishes - Part 10: 77 regular (ISO 9100-10:2005); German version EN ISO 9100-10:2005
• DIN EN ISO 9100-12:2005 Glass containers - Vacuum lug finishes - Part 12: 89 regular (ISO 9100-12:2005); German version EN ISO 9100-12:2005
• DIN 12602:1977 Laboratory glassware; Soxhlet extractors with standard ground joints
• DIN 12604:1977-05 Laboratory glassware; jacketed Soxhlet extractors with standard ground joints
• DIN 12779:1978 Laboratory glassware; laboratory thermometers, quickly indicating (distillation thermometers)
• DIN 10956:2007-08 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use
• DIN 12242-1:1980 Laboratory glassware; interchangeable conical ground joints, dimensions, tolerances
• DIN 12463:2019-06 Laboratory glassware - Bottles with standard ground joint, 200 mm in height
• DIN EN ISO 4787:2022-03 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021); German version EN ISO 4787:2021

PT-IPQ, Caliber glassware

• NP 2082-1986

HU-MSZT, Caliber glassware

• MNOSZ 21312-1955
• MNOSZ 21322-1955
• MNOSZ 15584-1953
• MNOSZ 2138-1955
• MSZ 21313-1968
• MNOSZ 2139-1955
• MNOSZ 2137-1955
• MSZ 21302-1966
• MNOSZ 10152-1952
• MNOSZ 21321-1955
• MSZ 21329-1955
• MNOSZ 21324-1955
• MNOSZ 21327-1955
• MNOSZ 21323-1955
• MNOSZ 21328-1955

Professional Standard - Machinery, Caliber glassware

• JB/T 13112-2017 Tempered glass cover for instruments & meters
• JB/T 9350-1999 Glass length scale for optical instruments technical specifications

Association Francaise de Normalisation, Caliber glassware

• NF H35-102:1991 Bottling industry. Glass bottles. Glass finish for pouring clip on cap finish of 32 (opening diameter 24 mm) for still liquids (so-called "verplast" diameter 32/24 no 3 for spout). Dimensions.
• NF B35-020*NF EN ISO 13130:2011 Laboratory glassware - Desiccators.
• NF B35-019*NF EN ISO 13132:2011 Laboratory glassware - Petri dishes.
• NF H35-101:1991 Bottling industry. Glass bottles. Glass finish for pouring clip on cap finish of 29 (opening diameter 21 mm) for still liquids (so-called "verplast" diameter 29/21 no 3 for spout). Dimensions.
• NF H35-105-1:1993 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 1 : 38 mm nominal diameter.
• NF H35-105-3:1993 Bottling industry. Wide mouth glass containers. Vacuum finish. Part 3 : 89 mm nominal diameter.
• NF H35-105-4:1993 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 4 : 100 mm nominal diameter.
• NF H35-105-7:1994 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 7 : 77 mm nominal diameter.
• NF H35-105-8:1994 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 8 : 82 mm nominal diameter.
• NF H35-105-2:1993 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 2 : 43 mm and 48 mm nominal diameters.
• NF H35-105-5:1994 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 5 : 53 mm and 58 mm nominal diameters.
• NF H35-105-6:1994 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 6 : 63 mm, 66 mm and 70 mm nominal diameters.
• NF H35-092:1991 Bottling industry. Wide-mouth glass containers (thead finish).
• NF H35-093:1991 Bottling industry. Wide-mouth glass containers (crimp finish).
• NF ISO 16657:2006 Analyse sensorielle - Appareillage - Verre pour la dégustation de l'huile d'olive
• NF H35-127-2*NF EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: one way glass MCA 2 finish
• NF H35-127-1*NF EN 16291-1:2013 Glass packaging - Screw finishes for pressure capsules - Part 1 : returnable glass MCA 2 finish
• NF H44-009:1986 Aerosols dispensers. Glass containers. Dimensions of finish 18 mm.
• NF H44-034:1986 Aerosols dispensers. Glass containers. Dimensions of finish 11 mm.
• NF H44-032:1986 Aerosols dispensers. Glass containers. Dimensions of finish 17 mm.
• NF H44-033:1986 Aerosols dispensers. Glass containers. Dimensions of finish 13 mm.
• NF H44-010:1986 Aerosols dispensers. Glass containers. Dimensions of finish 20 mm.
• NF B35-798*NF EN ISO 24450:2006 Laboratory glassware - Wide-necked boiling flasks.
• NF H44-008:1986 Aerosols dispensers. Glass containers. Dimensions of finish 15 mm.
• NF B35-797:2005 Laboratory glassware - Boiling flasks with conical ground joints.
• NF B35-797*NF EN ISO 4797:2016 Laboratory glassware - Boiling flasks with conical ground joints
• NF B35-008:1974 Laboratory glassware. Conical flasks. Conical flasks with conical ground glass joint.
• NF H35-129*NF EN 16289:2013 Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish
• NF B35-309:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use.
• NF H35-113-1*NF EN ISO 9100-1:2005 Glass containers - Vacuum lug finishes - Part 1 : general
• NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
• NF EN ISO 384:2016 Matériels de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques
• NF B35-309*NF EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
• NF H35-113-7*NF EN ISO 9100-7:2005 Glass containers - Vacuum lug finishes - Part 7 : 58 deep
• NF H35-113-4*NF EN ISO 9100-4:2006 Glass containers - Vacuum lug finishes - Part 4 : 38 medium.
• NF H35-113-3*NF EN ISO 9100-3:2006 Glass containers - Vacuum lug finishes - Part 3 : 38 regular
• NF H35-113-14*NF EN ISO 9100-14:2005 Glass containers - Vacuum lug finishes - Part 14 : 110 regular
• NF H35-113-10*NF EN ISO 9100-10:2005 Glass containers - Vacuum lug finishes - Part 10 : 77 regular
• NF H35-113-2*NF EN ISO 9100-2:2006 Glass containers - Vacuum lug finishes - Part 2 : 33 medium
• NF H35-113-12*NF EN ISO 9100-12:2005 Glass containers - Vacuum lug finishes - Part 12 : 89 regular
• NF H35-113-11*NF EN ISO 9100-11:2005 Glass containers - Vacuum lug finishes - Part 11 : 82 regular
• NF H35-113-13*NF EN ISO 9100-13:2005 Glass containers - Vacuum lug finishes - Part 13 : 100 regular
• NF EN 29885:1994 Récipients en verre à col large - Déviation de planéité de la surface d'étanchéité supérieure - Méthodes d'essai
• NF EN ISO 9100-3:2006 Récipients en verre - Bagues à cran pour bouchage sous vide - Partie 3 : 38 regular
• NF EN ISO 9100-10:2005 Récipients en verre - Bagues à crans pour bouchage sous vide - Partie 10 : 77 regular
• NF H35-088:1991 Bottling industry. Screw neck glass container finish. Flask thread height.
• NF EN ISO 4797:2016 Verrerie de laboratoire - Fioles coniques et ballons à joint conique rodé
• NF EN ISO 9100-7:2005 Récipients en verre - Bagues à crans pour bouchage sous vide - Partie 7 : 58 deep
• NF EN ISO 4787:2021 Verrerie et matériel en plastique de laboratoire - Instruments volumétriques - Méthodes d'essai de la capacité et d'utilisation

British Standards Institution (BSI), Caliber glassware

• BS EN ISO 13130:2011 Laboratory glassware. Desiccators
• BS EN ISO 13132:2011 Laboratory glassware. Petri dishes
• BS ISO 9100:1995 Wide-mouth glass containers. Vacuum lug finishes. Dimensions
• BS 6748:1986+A1:2011 Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware
• BS EN ISO 9100-1:2005 Glass containers - Vacuum lug finishes - General
• BS EN ISO 4796-1:2001 Laboratory glassware. Bottles. Screw-neck bottles
• BS EN ISO 24450:2006 Laboratory glassware - Wide-necked boiling flasks
• BS EN ISO 9100-2:2006 Glass containers - Vacuum lug finishes - 33 medium
• BS EN ISO 9100-4:2006 Glass containers - Vacuum lug finishes - 38 medium
• BS EN ISO 9100-2:2005 Glass containers - Vacuum lug finishes - 33 medium
• BS EN ISO 9100-4:2005 Glass containers - Vacuum lug finishes - 38 medium
• BS EN ISO 9100-7:2005 Glass containers - Vacuum lug finishes - 58 deep
• BS 6711-1:1986 Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica. Names for items of apparatus
• BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
• BS EN 16289:2013 Glass packaging. Screw finishes for pressure capsules. MCA 7,5 RF finish
• BS EN ISO 9100-3:2006 Glass containers - Vacuum lug finishes - 38 regular
• BS EN ISO 4797:2005 Laboratory glassware - Boiling flasks with conical ground joints
• BS EN ISO 9100-14:2007 Glass containers - Vacuum lug finishes - 110 regular
• BS EN ISO 9100-3:2005 Glass containers - Vacuum lug finishes - 38 regular
• BS EN ISO 9100-10:2005 Glass containers - Vacuum lug finishes - 77 regular
• BS EN ISO 9100-11:2005 Glass containers - Vacuum lug finishes - 82 regular
• BS EN ISO 4797:2015 Laboratory glassware. Boiling flasks with conical ground joints
• BS EN ISO 9100-13:2005 Glass containers - Vacuum lug finishes - 100 regular
• BS EN ISO 9100-14:2005 Glass containers - Vacuum lug finishes - 110 regular
• BS EN ISO 9100-12:2005 Glass containers - Vacuum lug finishes - 89 regular
• BS EN ISO 9100-9:2005 Glass containers - Vacuum lug finishes - 63, 66 and 70 deep
• BS ISO 11418-2:2016 Containers and accessories for pharmaceutical preparations. Screw-neck glass bottles for syrups
• BS ISO 11418-2:2006 Containers and accessories for pharmaceutical preparations - Screw-neck glass bottles for syrups
• BS EN ISO 9100-5:2005 Glass containers - Vacuum lug finishes - 43 and 48 regular
• BS EN ISO 9100-6:2005 Glass containers - Vacuum lug finishes - 53 and 58 regular
• BS EN ISO 4796-1:2016 Tracked Changes. Laboratory glassware. Bottles. Screw-neck bottles
• BS EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
• BS EN ISO 9100-8:2005 Glass containers - Vacuum lug finishes - 63, 66 and 70 regular
• BS ISO 11418-7:2016 Containers and accessories for pharmaceutical preparations. Screw-neck vials made of glass tubing for liquid dosage forms

Standard Association of Australia （SAA）, Caliber glassware

• AS 2406:2006 Laboratory glassware - Glass condensers with interchangeable ground glass joints
• AS 2410:2005 Laboratory glassware - Interchangeable spherical ground glass joints
• AS 2409:2005 Laboratory glassware - Interchangeable conical ground glass joints
• AS 3812:2005 Laboratory glassware - Boiling flasks with interchangeable conical ground glass joints
• AS 2162.1:1996 Verification and use of volumetric apparatus - General - Volumetric glassware

Korean Agency for Technology and Standards (KATS), Caliber glassware

• KS L 2303-2010 Glass apparatus for chemical analysis
• KS L 2303-2015 Glass apparatus for chemical analysis
• KS M 2670-1999 Glasswares for testing apparatus of petroleum products
• KS M 2670-1994 Glasswares for testing apparatus of petroleum products
• KS M 2670-1999(2021) Glasswares for testing apparatus of petroleum products
• KS L 2302-2012 Shape and dimension of glass apparatus for chemical analysis
• KS L 2302-1987 Shape and dimension of glass apparatus for chemical analysis
• KS L 2301-2015 Testing method of glass apparatus for chemical analysis
• KS L 2301-2010 Testing method of glass apparatus for chemical analysis
• KS L 2302-2017 Shape and dimension of glass apparatus for chemical analysis
• KS L 2301-1978 Testing method of glass apparatus for chemical analysis
• KS L ISO 4797-2016(2021) Laboratory glassware－Flasks with conical ground joints
• KS L 2302-2017(2022) Shape and dimension of glass apparatus for chemical analysis
• KS L ISO 4797:2006 Laboratory glassware-Flasks with conical ground joints
• KS L ISO 4797:2016 Laboratory glassware－Flasks with conical ground joints
• KS L 2323-2007 Interchangeable spherical ground glass joints
• KS L ISO 4787:2006 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
• KS L ISO 4787:2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
• KS L ISO 383:2012 Laboratory glassware-Interchangeable connical ground joints
• KS L 2320-2006 Interchangeable conical glass ground joints
• KS L ISO 4796-2:2012 Laboratory glassware－Bottles－Part 2：Conical neck bottles
• KS L ISO 4796-1:2012 Laboratory glassware－Bottles－Part 1：Screw-neck bottles
• KS L 2322-1996 CONICAL GROUND TAPERS OF LABORATORY GLASS STOPPERS
• KS L 2322-1986 CONICAL GROUND TAPERS OF LABORATORY GLASS STOPPERS
• KS B ISO 8655-3:2006 Piston-operated volumetric apparatus-Part 3:Piston burettes
• KS B ISO 8655-3:2017 Piston-operated volumetric apparatus－Part 3：Piston burettes
• KS P ISO 11418-2:2009 Containers and accessories for pharmaceutical preparations-Part 2:Screw-neck glass bottles for syrups

BE-NBN, Caliber glassware

• NBN 370.07-1965
• NBN 370.06-1965
• NBN 370.05-1965
• NBN 370.03-1956
• NBN 370.02-1965

Professional Standard - Agriculture, Caliber glassware

• GB 12803-1991 laboratory glass instrument measuring cup
• GB/T 22362-2023 laboratory glass instrument flask
• GB 12804-1991 laboratory glass instrument measuring cylinder
• GB 12805-1991 laboratory glass instrument burette
• GB 10809-1989 Glass container crown neck size
• GB 12807-1991 Laboratory glass instrument graduated pipette
• GB 12806-1991 Laboratory Glass Instruments Single Marked Line Volumetric Flask
• GB 12808-1991 Laboratory glass instrument single marked line pipette
• 水产品质量安全检验手册 1.1.3.2-2005 Chapter 1 General Introduction Section 1 Laboratory Management 3. Instrument Management (2) Glass Instrument Management

IT-UNI, Caliber glassware

• UNI 6148-1968
• UNI 6147-1968
• UNI 6145-1968
• UNI 6144-1968
• UNI 6146-1968
• UNI 7822-1978 Glass containers. Mouth, cetie type.
• UNI 2194-1943
• UNI 2756-1945
• UNI 2752-1945
• UNI 7935-1978 Glass containers. Ampoules with double constriction for liophilized products.

IN-BIS, Caliber glassware

• IS 5428 Pt.5-1985
• IS 8697-1977
• IS 10732-1983
• IS 3741 Pt.2-1990

Professional Standard - Light Industry, Caliber glassware

• QB/T 3737.1-1999 Glass lampshade for civil use and building calibre size
• QB/T 2109-1995 Laboratory glassware condenser
• QB/T 2560-2002 Laboratory glassware ----Filter funnels
• QB/T 3737.2-1999 Glass lampshade for civil use and building calibre size of base frame
• QB/T 3729-1999 Glass containers.Crown finishes dimensions
• QB/T 5820-2023 Glass containers－Small-mouth spice bottles
• QB/T 2561-2002 Laboratory glassware ----Test tubes and culture tubes
• QB/T 2559-2002 Guidelines on types of apparatus glass their composition and test methods
• QB 2107-1995 Color marking of laboratory glass instrument pipettes
• QB 1504-1992 Interchangeable conical frosted joints for laboratory glass instruments
• QB/T 2108-1995 Terminology for appearance defects of instrument glass and its products
• QB/T 2110-1995 Laboratory glass instrument separatory funnel and dropping funnel

European Committee for Standardization (CEN), Caliber glassware

• EN ISO 13132:2011 Laboratory glassware - Petri dishes (ISO 13132:2011)
• EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish (Incorporating corrigendum August 2014)
• EN 16291-1:2013 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish
• EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
• EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
• EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)
• EN 16291-2:2013/AC:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
• EN ISO 24450:2005 Laboratory glassware - Wide-necked boiling flasks
• EN ISO 8655-3:2022 Piston-operated volumetric apparatus - Part 3: Burettes (ISO 8655-3:2022)
• EN ISO 8655-3:2002 Piston-operated volumetric apparatus - Part 3: Piston burettes
• EN ISO 4797:2015 Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797:2015)
• EN ISO 9100-10:2005 Glass containers - Vacuum lug finishes - Part 10: 77 regular
• EN ISO 9100-14:2005 Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005)
• EN ISO 9100-13:2005 Glass containers - Vacuum lug finishes - Part 13: 100 regular
• EN ISO 4796-2:2000 Laboratory Glassware - Bottles - Part 2: Conical Neck Bottles
• EN ISO 9100-1:2005 Glass containers - Vacuum lug finishes - Part 1: General
• EN ISO 4796-1:2000 Laboratory Glassware - Bottles - Part 1: Screw-Neck Bottles ISO 4796-1: 2000

ZA-SANS, Caliber glassware

• SANS 115:2009 Laboratory glassware - Burettes
• SANS 4788:1980 Laboratory glassware - Graduated measuring cylinders
• SANS 4788:2009 Laboratory glassware - Graduated measuring cylinders
• SANS 111:2009 Laboratory glassware - Graduated pipettes
• SANS 4800:1998 Laboratory glassware - Separating funnels and dropping funnels
• SANS 113:1976 Laboratory glassware - Interchangeable conical ground joints

Professional Standard - Building Materials, Caliber glassware

• JC/T 181-1981 QSY, DSY transparent quartz glass instrument

国家市场监督管理总局、中国国家标准化管理委员会, Caliber glassware

• GB/T 12810-2021 Laboratory glassware—Capacity methods testing and use of volumetric instruments
• GB/T 15726-2021 Glassware一Stress examination methods
• GB/T 12807-2021 Laboratory glassware一Graduated pipettes
• GB/T 7996-2020 Norminal capacity and diameter of glass-lined equipment
• GB/T 37856-2019 Glass containers—Dimensions for 26H180 crown finish
• GB/T 37851-2019 Glass containers—Standard tolerances for flaconnage
• GB/T 37855-2019 Glass containers—Dimensions for 26H126 crown finish
• GB/T 40890-2021 General quality requirements and test methods for the teaching vitreous equipment
• GB/T 37869.1-2019 Glass containers—Vacuum lug finishes—Part 1:General
• GB/T 37854-2019 Wide-mouth glass containers—Deviation from flatness of top sealing surface—Test methods

YU-JUS, Caliber glassware

• JUS Z.M5.060-1979 Glass containers for food industry. Gtassjars 370 ml Oosure P. T
• JUS Z.M5.058-1979 Glass containers for food industij. Glassjars 370ml Cio sure P.T
• JUS Z.M5.062-1979 Glass containers for food industry. Glassjars 720 ml. ClosureP.T
• JUS Z.M5.061-1979 Glass containers for food industry. Glassjars370 ml. Closure T.O
• JUS Z.M5.065-1979 Glass containers for food industry. Glassjars 2500 ml. Gosure T.O
• JUS Z.M5.057-1979 Glass containers for food industry. Glass jars 200 ml. Cbsure T.O
• JUS Z.M5.059-1979 Glass containers for food industry. Glassjars 370 ml Cbsure T.0
• JUS Z.M5.063-1979 Glass containers for food industry. Glassjars 720 mi Closure T.O
• JUS Z.M5.056-1979 Glass containers for food industrv. Glassjars 200 ml Cbsure P. T
• JUS Z.M5.055-1979 Glass containers for food industry. Glassjars 100 ml Cbsure T.O
• JUS Z.M5.054-1979 Glass containers for food industry. Gkssjars 100 ml. Cbsure P.T
• JUS Z.M5.064-1979 Glasscontainersforfoodindustry. Glassjars2500ml ClosureP.T
• JUS B.E8.095-1987 Laboratory glassware. Methods for thermal shock test
• JUS H.Z8.056-1984 Testing of engine antifreezes. Determination of corrosion in glass apparatus
• JUS Z.M5.119-1980 Glass containers for food industry Capsforjars Quality control
• JUS Z.M5.116-1980 Glass containers for food industr/. Bottle screvved neck ? 82 mm. Cap T. O
• JUS K.T3.950-1983 Handles for gauging members with taperlock; 1:50 up to 50 mm nominal diameter

CZ-CSN, Caliber glassware

• CSN 70 4246-1973 Glass apparatus for the determination of arsenic, antimony and tin
• CSN 70 4242-1967 Glass apparatus for the determination of sulphur in technical iron
• CSN 70 4245-1967 Glass elements for the determination of aluminium in technical iron
• CSN 70 4241-1967 Glass apparatus for the determination of carbon in technical iron
• CSN ST SEV 2436-1980
• CSN 70 4205-1999 Laboratory glassware - Ground joint parts
• CSN 70 4240-1967 Glass apparatus and elements for analysis of technical iron. Common regulations
• CSN 70 4243-1981 Glass apparatus by Parnas-Wagner for the determination of nitrogen
• CSN ISO 2733:1995 Vitreous and porcelain enamels.Apparatus for testing with acid and neutral liquids and their vapours

教育部, Caliber glassware

• JY/T 0428-2011 Glass instrument gas washing bottle for teaching

Japanese Industrial Standards Committee (JISC), Caliber glassware

• JIS K 2839:1990 Glasswares for testing apparatus of petroleum products
• JIS R 4201:1983 Glass-lined apparatus and equipment for industry
• JIS R 3503 AMD 1:2007 Glass apparatus for chemical analysis (Amendment 1)
• JIS B 7960-1:2015 Hydrogen ion meters using glass electrodes -- Measuring instruments used in transaction or certifications -- Part 1: Glass electrodes
• JIS B 7411-1:2014 Glass thermometers for general -- Part 1: General measuring instruments
• JIS B 7960-1:2022 Hydrogen ion meters using glass electrodes -- Measuring instruments used in transaction or certification -- Part 1: Glass electrodes

VN-TCVN, Caliber glassware

• TCVN 1044-2007 Laboratory glassware.Volumetric glassware.Methods for use and testing of capacity
• TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use
• TCVN 1050-1971 Testing glasswares.Grinding cones of tapping angle 1:10.Dimension of the grinding part

ES-UNE, Caliber glassware

• UNE-EN 14854:2022 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers
• UNE-EN ISO 4797:2016 Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797:2015)
• UNE-EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021) (Endorsed by Asociación Española de Normalización in February of 2022.)
• UNE-EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)

Society of Automotive Engineers (SAE), Caliber glassware

• SAE AMS2521B-1994 REFLECTION-REDUCING COATINGS For Instrument Glasses
• SAE AMS2521C-2001 Coating, Reflection-Reducing for Instrument Glasses
• SAE ARP924-1991 SPECIFICATION AND INSPECTION OF GLASS FOR INTEGRALLY LIGHTED AEROSPACE INSTRUMENTS
• SAE ARP924A-2005 Specification and Inspection of Glass for Integrally Lighted Aerospace Instruments
• SAE ARP924B-2018 Specification and Inspection of Glass for Integrally Lighted Aerospace Instruments

SAE - SAE International, Caliber glassware

• SAE AMS2521B-1989 Reflection-Reducing Coatings for Instrument Glasses
• SAE ARP924A-2000 Specification and Inspection of Glass for Integrally Lighted Aerospace Instruments
• SAE ARP924-1967 Specification and Inspection of Glass for Integrally Lighted Aerospace Instruments
• SAE ARP924B-2013 Specification and Inspection of Glass for Integrally Lighted Aerospace Instruments

RO-ASRO, Caliber glassware

• STAS 7050-1974 Laboratory glassware KOWARSKY APPARATUS
• STAS SR ISO 8040 Optics and optioal instruments - Mlcroscopes - Connecting dimensions of tube slides and tubes slois
• STAS SR ISO 9100:1996 Wide - mouth glass containers - Vacuum lug finishes - Oimensions

Military Standards (MIL-STD), Caliber glassware

• DOD A-A-53692-1988 ELECTROCARDIOGRAPH, GENERATOR/CALIBRATOR

TR-TSE, Caliber glassware

• TS 3258-1978 SHAPES AND DIMENSIONS OF GLASS CONTAINER FINISHES
• TS 784-1969 METHODS FOR THERMAL SHOCK TESTS ON LABORATORY GLASSWARE
• TS 2064-1975 METHODS OF SAMPLING AND EVALUATION OF INSPECTION AND TEST RESULTS OF LABORATORY GLASS WARE AND MEDICAL GLASS INSTRUMENTS

International Organization for Standardization (ISO), Caliber glassware

• ISO 8162:1985 Glass containers; Tall crown finishes; Dimensions
• ISO 8163:1985 Glass containers; Shallow crown finishes; Dimensions
• ISO 9100:1992 Wide-mouth glass containers; vacuum lug finishes; dimensions
• ISO 9056:1990 Glass containers; series of pilferproof finish; dimensions
• ISO 24450:2005 Laboratory glassware - Wide-necked boiling flasks
• ISO 4796-1:2016 Laboratory glassware - Bottles - Part 1: Screw-neck bottles
• ISO 4797:2004 Laboratory glassware - Boiling flasks with conical ground joints
• ISO 4797:1981 Laboratory glassware; Flasks with conical ground joints
• ISO 4797:2015 Laboratory glassware - Boiling flasks with conical ground joints
• ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
• ISO 641:1975 Laboratory glassware; Interchangeable spherical ground joints
• ISO 383:1976 Laboratory glassware; Interchangeable conical ground joints
• ISO 4796-1:2000 Laboratory glassware - Bottles - Part 1: Screw-neck bottles
• ISO 4796-2:2000 Laboratory glassware - Bottles - Part 2: Conical neck bottles
• ISO 9100-1:2005 Glass containers - Vacuum lug finishes - Part 1: General
• ISO 9057:1991 Glass containers; 28 mm tamper-evident finish for pressurized liquids; dimensions
• ISO 4791-1:1985 Laboratory apparatus; Vocabulary relating to apparatus made essentially from glass, porcelain or vitreous silica; Part 1 : Names for items of apparatus Trilingual edition
• ISO 9100-4:2005 Glass containers - Vacuum lug finishes - Part 4: 38 medium
• ISO 9100-2:2005 Glass containers - Vacuum lug finishes - Part 2: 33 medium
• ISO 8655-3:2002 Piston-operated volumetric apparatus - Part 3: Piston burettes
• ISO 4787:2021 Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use
• ISO 9100-7:2005 Glass containers - Vacuum lug finishes - Part 7: 58 deep
• ISO 11418-2:2005 Containers and accessories for pharmaceutical preparations - Part 2: Screw-neck glass bottles for syrups
• ISO 9100-14:2005 Glass containers - Vacuum lug finishes - Part 14: 110 regular
• ISO 9100-10:2005 Glass containers - Vacuum lug finishes - Part 10: 77 regular
• ISO 9100-11:2005 Glass containers - Vacuum lug finishes - Part 11: 82 regular
• ISO 9100-12:2005 Glass containers - Vacuum lug finishes - Part 12: 89 regular
• ISO 9100-13:2005 Glass containers - Vacuum lug finishes - Part 13: 100 regular
• ISO 9100-3:2005 Glass containers - Vacuum lug finishes - Part 3: 38 regular
• ISO 9885:1991 Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods

Danish Standards Foundation, Caliber glassware

• DS/EN ISO 24450:2006 Laboratory glassware - Wide-necked boiling flasks
• DS/EN ISO 4797:2005 Laboratory glassware - Boiling flasks with conical ground joints
• DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
• DS/ISO 9885:1994 Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methods

Professional Standard - Commodity Inspection, Caliber glassware

• SN/T 2116-2008 Rules for the inspection of glassware for import and export
• SN/T 0400.11-2002 Rules for the inspection of canned food for export.Glass container
• SN/T 3701.8-2014 Technical requirements for the inspection of used electrical and mechanical products for import.Part 8:Machines and plants for the manufacture and processing of glass

Taiwan Provincial Standard of the People's Republic of China, Caliber glassware

• CNS 8861-1982 Method of Test for Glass Apparatus for Chemical Analysis

American Society for Testing and Materials (ASTM), Caliber glassware

• ASTM E438-92(2018) Standard Specification for Glasses in Laboratory Apparatus
• ASTM F2720/F2720M-09 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe

Professional Standard - Military and Civilian Products, Caliber glassware

• WJ 1207-1980 Optical instrument assembly general tool glass bottle

未注明发布机构, Caliber glassware

• BS 3463:1975(1999) Specification for Observation and gauge glasses for pressure vessels
• DIN EN 17177:2019 Glass packaging – crown closure – crown closure with a diameter of 26 mm and a height of 6 mm
• DIN EN 17177:2020 Glass packaging – crown closure – crown closure with a diameter of 26 mm and a height of 6 mm

RU-GOST R, Caliber glassware

• GOST 7851-1974 Laboratory and chemist glassware. Necks. Internal diameters
• GOST 25749-2005 Metal winding lids. General specifications
• GOST 25749-1983 Metal cap for glass package with neck crown - type 3. Specifications
• GOST 9737-1993 Laboratory glassware. Interchangeable spherical ground joints
• GOST ISO 9885-2013 Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods
• GOST 28165-1989 Laboratory instruments and apparatus made from glass. Water distilation apparatus. Evaporators. Rectification. Apparatus. General techical requirements

AENOR, Caliber glassware

• UNE 126108:2005 Glass containers. Positioning notchs. Dimensional characterisitics.
• UNE 49810:2006 Packaging. Closures for glass containers. Closures for mouths for pilferproof series.

Professional Standard-Packaging, Caliber glassware

• BB/T 0071-2017 Packaging glass container cassette bottle size

CU-NC, Caliber glassware

• NC 57-62-1986 Reciplents, Instruments and Laboratory Utenslls. Laboratory Glassware. Selection

KR-KS, Caliber glassware

• KS L ISO 4797-2016 Laboratory glassware－Flasks with conical ground joints

SE-SIS, Caliber glassware

• SIS SMS 1355-1950
• SIS SMS 1353-1950
• SIS SMS 1351-1950
• SIS SMS 1348-1950

GOSTR, Caliber glassware

• GOST 34407-2018 Glass packaging. Bottles. Cork mouth finish with a bore diameter of 18,5 mm for corks crown. Dimensions
• GOST 25749-2020 Metal winding lids. General specifications

U.S. Military Regulations and Norms, Caliber glassware

• ARMY MIL-C-14806 A NOTICE 2-1997 COATING, REFLECTION REDUCTING, FOR INSTRUMENT COVER GLASSES AND LIGHTING WEDGES
• ARMY MIL-C-14806 A VALID NOTICE 1-1987 COATING, REFLECTION REDUCTING, FOR INSTRUMENT COVER GLASSES AND LIGHTING WEDGES
• ARMY MIL-C-14806 A (2)-1974 COATING, REFLECTION REDUCTING, FOR INSTRUMENT COVER GLASSES AND LIGHTING WEDGES
• ARMY MIL-C-14806 A-1969 COATING, REFLECTION REDUCTING, FOR INSTRUMENT COVER GLASSES AND LIGHTING WEDGES

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Caliber glassware

• GB/T 35599-2017 Laboratory glass and glassware outward defect terms

CEN - European Committee for Standardization, Caliber glassware

• EN ISO 4797:2004 Laboratory glassware - Boiling flasks with conical ground joints

Defense Logistics Agency, Caliber glassware

• DLA DSCC-DWG-13006-2012 CAPACITORS, FIXED, GLASS DIELECTRIC, (RADIAL OR AXIAL WIRE-LEAD TERMINALS)

Canadian General Standards Board （CGSB), Caliber glassware

• CGSB 41.22-93-CAN/CGSB-1993 Fibreglass-Reinforced Plastic Corrosion- Resistant Equipment

PL-PKN, Caliber glassware

• PN C12330-1965 Laboratory porcelainware and rela?ed appara?us Ouality specifica?ions and ?es? methods
• PN B13006-1974 Laboratory glassware Multiple angled and parallel-neck round bottom flasks

PH-BPS, Caliber glassware

• PNS ISO 384:2021 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments

Lithuanian Standards Office , Caliber glassware

• LST EN ISO 4797:2005 Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797:2004)

Others:   glassware, glassware, Specification Glassware, Glassware Specifications, glass instrument acid, Glass Testing Instruments, glassware name, Glass Testing Instruments, Instrument glass frame, Glassware Washing, test glassware, Caliber glassware, Instrument glass, equipment instrument glass, glassware use, Instrument Glass Specifications, Instrument glass, Cadmium glassware, glassware, Measuring Glass Instruments.