ZH
RU
ES

Oxygen Analyzer

Oxygen Analyzer, Total:492 items.

In the international standard classification, Oxygen Analyzer involves: Pharmaceutics, Medical equipment, Air quality, Inorganic chemicals, Analytical chemistry, Industrial automation systems, Environmental testing, Glass, Beverages, Surface treatment and coating, Electrical and electronic testing, Lubricants, industrial oils and related products, Optics and optical measurements, Equipment for the chemical industry, Linear and angular measurements, Products of the chemical industry, Water quality, Thermodynamics and temperature measurements, Metrology and measurement in general, Vocabularies, Environmental protection, Particle size analysis. Sieving, Non-ferrous metals, Rubber, Electricity. Magnetism. Electrical and magnetic measurements, Nuclear energy engineering, Organic chemicals, Cutting tools, Protection against fire, Electrical engineering in general, Electrical wires and cables, Body care equipment, Plastics, Fuels, Materials for the reinforcement of composites, Textile fibres, Insulating fluids, Semiconducting materials, Laboratory medicine, Farming and forestry, Law. Administration, Radiation protection, Fertilizers, Coatings and related processes used in aerospace industry, Crude petroleum, Construction materials, Cereals, pulses and derived products, Welding, brazing and soldering, Paint ingredients, Explosion protection, Products of the textile industry, Non-metalliferous minerals, Refractories, Electrical accessories, Metalliferous minerals, Measurement of volume, mass, density, viscosity.


National Metrological Verification Regulations of the People's Republic of China, Oxygen Analyzer

工业和信息化部, Oxygen Analyzer

  • JB/T 20201-2021 Vaporized hydrogen peroxide concentration detector
  • YS/T 738.5-2020 Methods for analysis of aluminum hydroxide for fillers Part 5: Determination of particle size

National Metrological Technical Specifications of the People's Republic of China, Oxygen Analyzer

Korean Agency for Technology and Standards (KATS), Oxygen Analyzer

  • KS P 6124-2006(2016) Oxygen analyzers for medical use
  • KS M 2105-2005 Methods of measuring dust concentration in flue gas
  • KS B 5353-1980(2022) Continuous Analyzers for Oxygen in Flue Gas
  • KS C IEC 61207-6-2014(2019) Expression of performance of gas analyzers — Part 6: Photometric analyzers
  • KS B 5353-1980 Continuous Analyzers for Oxygen in Flue Gas
  • KS B 5354-1993 Continuous Analyzers for sulfur dioxide in flue gas
  • KS B 5355-1993 Continuous analyzers for oxides of nitrogen in flue gas
  • KS B 5359-1990(2016) Continuous Analysers for Sulfur Dioxide in Ambient Air
  • KS B 5359-2001 Continuous Analysers for Sulfur Dioxide in Ambient Air
  • KS B 5354-2003 Continuous analyzers for dioxide sulfur in flue gas
  • KS B 5354-2018 Continuous analyzers for dioxide sulfur in flue gas
  • KS B 5358-1987(2022) Continuous analyzer for carbon monoxide in ambient air
  • KS B 5358-1987(2017) Continuous analyzer for carbon monoxide in ambient air
  • KS B 5359-1990(2021) Continuous Analysers for Sulfur Dioxide in Ambient Air
  • KS B 5360-1990(2021) Continuous Analysers for Oxides of Nitrogen in Ambient Air
  • KS I ISO 15337:2012 Ambient air-Gas phase titration-Calibration of analysers for ozone
  • KS B 5643-2003(2018) Continuous analyzers for oxidants in ambient air
  • KS B 5360-1990(2016) Continuous Analysers for Oxides of Nitrogen in Ambient Air
  • KS I ISO 15337:2017 Ambient air－Gas phase titration－Calibration of analysers for ozone
  • KS I ISO 15337:2022 Ambient air — Gas phase titration — Calibration of analysers for ozone
  • KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
  • KS I ISO 11564:2004 Stationary source emissions-Determination of the mass concentrationof nitrogen oxides(Naphthylethylenediamine photometric method)
  • KS I ISO 11564:2014 Stationary source emissions — Determination of the mass concentration of nitrogen oxides(naphthylethylenediamine photometric method)
  • KS C IEC 60746-5-2014(2019) Expression of performance of electrochemical analyzers — Part 5: Oxidation-reduction potential or redox potential
  • KS C IEC 61034-1:2008 Measurement of smoke density of cables burning under defined conditions－Part 1：Test apparatus
  • KS P ISO 19448:2021 Dentistry — Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode
  • KS M 3047-2018 Methods for the analysis of evolved gases concentration by burning of plastics
  • KS D 0078-2008 Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy
  • KS D ISO 14237-2003(2018)
  • KS I ISO 4221:2006 Air quality－Determination of mass concentration of sulphur dioxide in ambient air(Thorin spectrophotometric method)
  • KS I ISO 6767:2006 Ambient air－Determination of the mass concentration of sulphur dioxide [Tetrachloromercurate (TCM)/pararosaniline method]
  • KS I ISO 4221-2006(2016) Air quality－Determination of mass concentration of sulphur dioxide in ambient air(Thorin spectrophotometric method)
  • KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
  • KS M ISO 2926:2010 Aluminium oxide primarily used for the production of aluminium-Particle size analysis for the range 45μm to 150μm - Method using electroformed sieves
  • KS D ISO 17973:2011 Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
  • KS M ISO 1431-3:2009 Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Part 3：Reference and alternative methods for determining the ozone concentration in laboratory test chambers
  • KS D ISO 15472:2003 Surface chemical analysis-X-ray photoelectron spectrometers-Calibration of energy scales
  • KS C IEC 61207-2-2014(2019) Expression of performance of gas analyzers — Part 2: Oxygen in gas(utilizing high-temperature electrochemical sensors)

Indonesia Standards, Oxygen Analyzer

  • SNI 19-7117.10-2005 Exhaust gas emissions - Stationary sources - Part 10: Test methods of CO, CO2 and O2 concentration using automatic analysis instrumentation

国家市场监督管理总局、中国国家标准化管理委员会, Oxygen Analyzer

  • GB/T 37397-2019 Ozone calibrators and analyzers
  • GB/T 41456-2022 Nanotechnologies—Determination of the concentration of nanometer titanium dioxide airborne dust in workplace—Spectrophotometry method
  • GB/T 2423.33-2021 Environmental testing—Part 2: Test methods—Test Kca: High concentration sulfur dioxid

Japanese Industrial Standards Committee (JISC), Oxygen Analyzer

  • JIS K 0803:1995 Continuous dissolved oxygen analyzer
  • JIS H 8686-2:2013 Anodizing of aluminium and its alloys.Instrumental determination of image clarity of anodic oxidation coatings.Instrumental method
  • JIS D 1030:1995 Analytical procedure for continuous measurement of carbon monoxide, carbon dioxide and hydrocarbon in automobile exhaust gas
  • JIS B 7957:1992 Continuous analyzers for oxidants in ambient air
  • JIS B 7957:2006 Continuous analyzers for ozone and oxidants in ambient air
  • JIS B 7951:1986 Continuous analyzer for carbon monoxide in ambient air
  • JIS B 7981:1996 Continuous analyzers for sulfur dioxide in flue gas
  • JIS B 7952:2004 Continuous analyzer for sulfur dioxide in ambient air
  • JIS B 7951:2004 Continuous analyzer for carbon monoxide in ambient air
  • JIS B 7987:2006 Continuous analyzers for carbon monoxide in flue gas
  • JIS B 7983:1994 Continuous analyzers for oxygen in flue gas
  • JIS B 7982:1995 Continuous analyzers for oxides of nitrogen in flue gas
  • JIS B 7953:2004 Continuous analyzers for oxides of nitrogen in ambient air
  • JIS B 7986:2006 Continuous analyzers for carbon dioxide in flue gas
  • JIS B 7952:1996 Continuous analyzers for sulfur dioxide in ambient air
  • JIS B 7951:1998 Continuous analyzer for carbon monoxide in ambient air
  • JIS B 7953:1997 Continuous analysers for oxides of nitrogen in ambient air
  • JIS K 6259-2:2015 Rubber, vulcanized or thermoplastic -- Determination of ozone resistance -- Part 2: Determination of the ozone concentration
  • JIS B 7983 AMD 1:2006 Continuous analyzers for oxygen in flue gas (Amendment 1)
  • JIS B 7982:2002 Automated measuring systems and analyzers for nitrogen oxides in flue gas
  • JIS B 7981:2002 Automated measuring systems and analyzers for sulfur dioxide in flue gas
  • JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
  • JIS K 0165:2011 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis

ES-AENOR, Oxygen Analyzer

HU-MSZT, Oxygen Analyzer

International Electrotechnical Commission (IEC), Oxygen Analyzer

  • IEC 61207-3:2019 RLV Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
  • IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
  • IEC 61207-3:1998 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
  • IEC 61207-3:2002/COR2:2003 Gas analyzers - Expression of performance - Part 3：Paramagnetic oxygen analyzers; Technical Corrigendum 2
  • IEC 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
  • IEC 60741:1982 Multichannel amplitude analyzers: Standards for time-to-amplitude converters
  • IEC 60746-5:1992 Expression of performance of electrochemical analyzers; part 5: oxidation-reduction potential or redox potential
  • IEC 61034-1:1990 Measurement of smoke density of electric cables burning under defined conditions; part 1: test apparatus
  • IEC 61342:1995 Nuclear instrumentation - Multichannel pulse height analyzers - Main characteristics, technical requirements and test methods

Danish Standards Foundation, Oxygen Analyzer

  • DS/EN 61207-3/Corr.2:2003 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
  • DS/EN 61207-3/Corr.1:2003 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
  • DS/EN 61207-3:2002 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
  • DS/EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
  • DS 235:1978 Water analysis. Determination of acidity and carbon dioxide
  • DS/ISO 7767:1989 Oxygen analyzers for monitoring patient breathing mixtures. Safety requirements
  • DS/ISO 13641-2:2004 Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 2: Test for low biomass concentrations
  • DS/EN 14034-4+A1:2011 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds

European Committee for Electrotechnical Standardization（CENELEC）, Oxygen Analyzer

  • EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
  • EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers
  • EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media

Association Francaise de Normalisation, Oxygen Analyzer

  • NF C46-251-3*NF EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3 : paramagnetic oxygen analysers
  • NF EN IEC 61207-3:2019 Analyseurs de gaz - Expression des performances - Partie 3 : analyseurs d'oxygène paramagnétiques
  • XP CEN/TS 17021:2018 Émissions de sources fixes - Détermination de la concentration massique en dioxyde de soufre par des techniques instrumentales
  • NF C46-253*NF EN 61207-3:2002 Gas analysers - Expression of performance - Part 3 : paramagnetic oxygen analysers.
  • XP X43-043*XP CEN/TS 17021:2018 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • NF EN 61207-6:2015 Expression des performances des analyseurs de gaz - Partie 6 : analyseurs photométriques
  • NF C46-251-6*NF EN 61207-6:2015 Expression of performance of gas analyzers - Part 6 : photometric analyzers
  • NF C46-256:1994 Expression of performance of gas analysers. Part 6 : photometric analyzers.
  • NF A06-725:1992 Analyse chimique du cuivre - Dosage de l'oxygène - Méthode instrumentale.
  • NF X43-324-4/IN1*NF EN 1948-4/IN1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
  • FD CEN/TR 13205-3:2014 Exposition sur les lieux de travail - Évaluation des performances des instruments de mesurage des concentrations d'aérosols - Partie 3 : Analyse des données d'efficacité de prélèvement
  • FD X43-283-3*FD CEN/TR 13205-3:2014 Workplace exposure - Assessment of performance of instruments for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
  • NF C46-254*NF EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
  • NF X85-011*NF EN 17351:2020 Bio-based products - Determination of the oxygen content using an elemental analyser
  • NF EN 62703:2013 Expression des performances des analyseurs d'oxygène fluorométriques en milieu liquide
  • NF EN 17351:2020 Produits biosourcés - Détermination de la teneur en oxygène à l'aide d'un analyseur élémentaire
  • NF A06-507:1957 Chemical analysis of lead and lead oxides. Turbidimetric determination of tin.
  • NF T20-743:1967 Chemical analysis of maleic and phtahlic anhydrides. Estimate of concentration by determination of total acidity with phthenolphthalein.
  • NF X43-339*NF ISO 11564:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method.
  • NF X43-013:1977 Atmospheric pollution.determination of the concentration by mass ofsulphur dioxide, in the ambient air.analysis by the thorin spectrophotometric method.
  • XP U42-469*XP CEN/TS 17060:2018 Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline
  • NF EN 14034-4+A1:2011 Détermination des caractéristiques d'explosion des nuages de poussière - Partie 4 : détermination de la concentration limite en oxygène CLO des nuages de poussière
  • NF EN 14034-4/IN1:2011 Détermination des caractéristiques d'explosion des nuages de poussières - Partie 4 : détermination de la concentration limite en oxygène CLO des nuages de poussière
  • NF T20-223:1973 Aluminium oxide primarily used for the production of aluminium. Particle size analysis. Sieving method.
  • NF T20-251:1968 CHEMICAL ANALYSIS OF HYDROCHLORIC,NITRIC AND SULPHURIC ACIDS. ESTIMATE OF APPROXIMATE STRENGTH BY DENSITY MEASUREMENT.
  • NF EN ISO 19448:2018 Médecine bucco-dentaire - Analyse de la concentration en fluorure dans les solutions aqueuses en utilisant une électrode sélective d'ions fluorures
  • NF ISO 17973:2006 Analyse chimique des surfaces - Spectromètres d'électrons Auger à résolution moyenne - Étalonnage des échelles d'énergie pour l'analyse élémentaire
  • NF EN ISO 11357-6:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 6 : détermination du temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à l'oxydation (OIT dynamique)
  • NF X21-054*NF ISO 17973:2006 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis.
  • NF C46-252*NF EN 61207-2:1994 Expression of performance of gas analyzers. Part 2 : oxygen in gas (utilizing high-temperature electrochemical sensors).
  • NF S91-275*NF EN ISO 19448:2018 Dentistry - Analysis of fluoride concentration in aqueous solutions by use of fluoride-ion selective electrode
  • NF S66-200-4:2005 Determination of the explosion characteristics of dust clouds - Part 4 : determination of the limiting oxygen concentration LOC of dust clouds.
  • NF S66-200-4/IN1*NF EN 14034-4/IN1:2011 Determination of explosion characteristics of dust clouds - Part 4 : determination of the limiting oxygen concentration LOC of dust clouds.
  • NF S66-200-4*NF EN 14034-4+A1:2011 Determination of explosion characteristics of dust clouds - Part 4 : determination of the limiting oxygen concentration LOC of dust clouds.
  • NF EN ISO 21587-1:2007 Analyse chimique des produits réfractaires d'aluminosilicates (méthode alternative à la méthode par fluorescence de rayons X) - Partie 1 : appareillage, réactifs, dissolution et teneur en silice par gravimétrie
  • NF EN ISO 10058-1:2009 Analyse chimique des produits de magnésie et de dolomie (méthode alternative à la méthode par fluorescense de rayons X) - Partie 1 : appareillage, réactifs, mise en solution et détermination de la teneur en silice par gravimétrie
  • NF X21-055:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales.
  • NF X43-333-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : manual gravimetric method.
  • NF T20-372:1969 Chemical analysis of potassium hydroxide. Determination of potassium (flame photometry method).
  • NF X43-324-1*NF EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1 : sampling of PCDDs/PCDFs
  • FD ISO/TR 22335:2008 Analyse chimique des surfaces - Profilage en profondeur - Mesurage de la vitesse de pulvérisation : méthode par empreinte de grille au moyen d'un profilomètre à stylet mécanique
  • NF G07-350*NF EN ISO 1973:2021 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
  • NF G07-350:1996 Textile fibres. Determination of linear density. Gravimetric method and vibroscope method.

AENOR, Oxygen Analyzer

  • UNE-EN 61207-3:2004 Gas analyzers - Expression of performance -- Part 3: Paramagnetic oxygen analyzers
  • UNE 30062:1956 ANALYSIS REAGENTS. ALCOOL ETHYLIQUE OF 95%.
  • UNE 30148:1960 ANALYSIS REAGENTS. PERCHLORIC ACID (SOLUTION TO 70%).
  • UNE-ISO 15337:2010 Ambient air -- Gas phase titration -- Calibration of analysers for ozone
  • UNE 77203:1993 AIR QUALITY. DETERMINATION OF MASS CONCENTRATION OF SULPHUR DIOXIDE IN AMBIENT AIR. THORIN SPECTROPHOTOMETRIC METHOD.
  • UNE-EN 14034-4:2005+A1:2011 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds

German Institute for Standardization, Oxygen Analyzer

  • DIN EN IEC 61207-3:2020-12 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (IEC 61207-3:2019); German version EN IEC 61207-3:2019 / Note: DIN EN 61207-3 (2002-11) and DIN EN 61207-3 Berichtigung 1 (2003-05) remain valid alongside this standard u...
  • DIN CEN/TS 17021:2017-05*DIN SPEC 33976:2017-05 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques; German version CEN/TS 17021:2017
  • DIN EN 61207-6:1995 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994
  • DIN EN 61207-6:2016-03 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015 / Note: DIN EN 61207-6 (1995-02) remains valid alongside this standard until 2017-12-30.
  • DIN CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version CEN/TS 1948-4:2007
  • DIN EN IEC 61207-3:2020 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (IEC 61207-3:2019); German version EN IEC 61207-3:2019
  • DIN EN 61207-3:2002 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002); German version EN 61207-3:2002
  • DIN EN 17351:2020 Bio-based products - Determination of the oxygen content using an elemental analyser
  • DIN EN 17351:2020-04 Bio-based products - Determination of the oxygen content using an elemental analyser; German version EN 17351:2020
  • DIN EN 1948-4:2010 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version EN 1948-4:2010
  • DIN EN 61207-6:2016 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015
  • DIN EN 62703:2014-12 Expression of performance of fluorometric oxygen analyzers in liquid media (IEC 62703:2013); German version EN 62703:2013
  • DIN ISO 9285:1998 Abrasive grains and crude - Chemical analysis of fused aluminium oxide (ISO 9285:1997)
  • DIN EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence; German version EN 14792:2017
  • DIN IEC 60746-5:1996 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential (IEC 60746-5:1992)
  • DIN VDE 0405-2:2005 Determination of breath alcohol concentration - Part 2: Specification of evidential breath analyzers
  • DIN VDE 0405-1:2017 Determination of breath alcohol concentration - Part 1: Specification of evidential breath analyzers
  • DIN EN ISO 19448:2018-04 Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018); German version EN ISO 19448:2018
  • DIN CEN/TS 17060:2017-07*DIN SPEC 10057:2017-07 Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline; German version CEN/TS 17060:2017
  • DIN IEC 60746-5:1996-07 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential (IEC 60746-5:1992)
  • DIN EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs English version of DIN EN 1948-1:2006-06
  • DIN EN 14034-4:2011-04 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds; German version EN 14034-4:2004+A1:2011
  • DIN V 40046-36:2006 Environmental testing - Part 36: Tests - Test Kx: Sulphur dioxide low concentration for contacts and connections
  • DIN 53509-2:1994 Testing of rubber - Determination of resistance to ozone cracking - Part 2: Reference method for determining ozone concentration in laboratory test chambers
  • DIN EN ISO 19448:2018 Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018)
  • DIN EN 15058:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry English version of DIN EN 15058:2006-09
  • DIN EN 62703:2014 Expression of performance of fluorometric oxygen analyzers in liquid media (IEC 62703:2013); German version EN 62703:2013

ES-UNE, Oxygen Analyzer

  • UNE-EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (Endorsed by Asociación Española de Normalización in October of 2019.)
  • UNE-EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers (Endorsed by AENOR in February of 2015.)
  • UNE-EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media (Endorsed by AENOR in October of 2013.)
  • UNE-EN 17351:2021 Bio-based products - Determination of the oxygen content using an elemental analyser
  • UNE-EN ISO 19448:2019 Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018)
  • UNE 73340-1:2021 Procedure for the determination of environmental radioactivity. Analytical methods. Part 1: Determination of the activity concentration of thorium (Th) isotopes by alpha spectrometry.

British Standards Institution (BSI), Oxygen Analyzer

  • BS EN IEC 61207-3:2019 Tracked Changes. Gas Analyzers. Expression of performance. Paramagnetic oxygen analysers
  • BS EN 1948-4:2010+A1:2013 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs
  • BS PD CEN/TS 17021:2017 Stationary source emissions. Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • BS DD CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling and analysis of dioxin-like PCBs
  • BS EN 61207-6:2015 Tracked Changes. Expression of performance of gas analyzers. Photometric analyzers
  • DD CEN/TS 1948-4:2007 Stationary source emissions — Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs — Part 4: Sampling and analysis of dioxin-like PCBs
  • BS ISO 15337:2009 Ambient air - Gas phase titration - Calibration of analysers for ozone
  • BS EN 17351:2020 Bio-based products. Determination of the oxygen content using an elemental analyser
  • BS EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
  • BS EN 1948-4:2010 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs
  • BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
  • 19/30387008 DC BS EN 17351. Bio-based products. Determination of the oxygen content using an elemental analyser
  • BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • 23/30436644 DC BS ISO 19430. Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
  • BS EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
  • BS EN ISO 19448:2018 Dentistry. Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode
  • 20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
  • BS ISO 17973:2003 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
  • BS 4044:1989 Methods for determination of fibre length by comb sorter diagram
  • BS EN IEC 60746-4:2019 Expression of performance of electrochemical analyzers - Dissolved oxygen in water measured by membrane-covered amperometric sensors
  • BS EN 15058:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: non-dispersive infrared spectrometry
  • BS ISO 23170:2022 Surface chemical analysis. Depth profiling. Non-destructive depth profiling of nanoscale heavy metal oxide thin films on Si substrates with medium energy ion scattering
  • BS ISO 17973:2016 Tracked Changes. Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis

European Committee for Standardization (CEN), Oxygen Analyzer

  • CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • PD CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • PD CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
  • EN 1948-4:2010 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs (Incorporates Amendment A1: 2013)
  • EN 1948-4:2010+A1:2013 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
  • PD CEN/TS 17060:2017 Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8- hydroxyquinoline
  • CEN/TS 17060:2017 Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline
  • EN 14034-4:2004 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds (Incorporates Amendment A1: 2011)
  • EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds

Association of German Mechanical Engineers, Oxygen Analyzer

  • VDI 2453 Blatt 2-2002 Gaseous air pollution measurement - Measurement of concentration of nitrogen monoxide and nitrogen dioxide - Calibration of NO/NOx chemiluminescence analysers using gas phase titration

AT-ON, Oxygen Analyzer

  • ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing
  • ONORM M 6274-1985 Water analysis; determination ofthe mass concentration offilterable matter and its residue on ignition
  • ONORM M 6272-1985 Water analysis; determination of the mass concentration of settleable matter in water and waste water

AT-OVE/ON, Oxygen Analyzer

  • OVE EN IEC 61207-3:2021 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (german version)

American Society for Testing and Materials (ASTM), Oxygen Analyzer

  • ASTM E2323-04 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer
  • ASTM D4178-82(2005) Standard Practice for Calibrating Moisture Analyzers
  • ASTM D6522-00 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • ASTM D6522-00(2005) Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • ASTM D6522-11 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • ASTM D6522-20 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Proce
  • ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
  • ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
  • ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
  • ASTM D4178-82(2017) Standard Practice for Calibrating Moisture Analyzers
  • ASTM D4178-82(2012) Standard Practice for Calibrating Moisture Analyzers
  • ASTM D4178-23 Standard Practice for Calibrating Moisture Analyzers
  • ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
  • ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
  • ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
  • ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
  • ASTM E2038-99 Standard Test Method for Temperature Calibration of Dielectric Analyzers
  • ASTM E2038-99(2004) Standard Test Method for Temperature Calibration of Dielectric Analyzers
  • ASTM E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
  • ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
  • ASTM E1363-03 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
  • ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
  • ASTM E1363-18 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
  • ASTM E1363-16 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
  • ASTM E1363-13 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
  • ASTM E1363-08 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
  • ASTM E1363-23 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
  • ASTM D5002-99 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM D5002-15 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM D5002-99(2010) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM D8049-19a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
  • ASTM D8049-19 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
  • ASTM D8049-21 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
  • ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
  • ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
  • ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
  • ASTM E2113-04 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
  • ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
  • ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
  • ASTM E1867-97 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
  • ASTM E1867-01 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
  • ASTM E2113-00 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
  • ASTM E2113-02 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
  • ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
  • ASTM E1867-18 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
  • ASTM E1867-22 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
  • ASTM E1867-16 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
  • ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
  • ASTM D7941/D7941M-23 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
  • ASTM D5002-13 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM D5002-16 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM E1867-06 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
  • ASTM E2113-18 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
  • ASTM E1867-11 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
  • ASTM E1867-13 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
  • ASTM E2113-13 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
  • ASTM E1867-12 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
  • ASTM E2113-23 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
  • ASTM D7941/D7941M-14 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
  • ASTM D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
  • ASTM F2393-12 Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications
  • ASTM E2551-18 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
  • ASTM E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
  • ASTM E611-08 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
  • ASTM E2995-15a(2020) Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
  • ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer

Professional Standard - Petroleum, Oxygen Analyzer

RO-ASRO, Oxygen Analyzer

CENELEC - European Committee for Electrotechnical Standardization, Oxygen Analyzer

  • EN 61207-6:1994 Expression of Performance of Gas Analyzers Part 6: Photometric Analyzers
  • EN IEC 60746-4:2019 Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane-covered amperometric sensors

Lithuanian Standards Office , Oxygen Analyzer

  • LST EN 61207-3-2003 Gas analyzers. Expression of performance. Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002)
  • LST EN 61207-6-2001 Expression of performance of gas analyzers. Part 6: Photometric analyzers (IEC 61207-6:1994)
  • LST EN 14034-4-2004+A1-2011 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds

SE-SIS, Oxygen Analyzer

  • SIS SS 02 84 21-1990 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Hydrogen peroxide — barium perchlorateIThorin-method
  • SIS 02 81 21-1974 Determination of the sum of calcium and magnesium concentration of water
  • SIS SS 02 84 25-1991 Air quality — Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics and calibration of automated measuring systems

Defense Logistics Agency, Oxygen Analyzer

Group Standards of the People's Republic of China, Oxygen Analyzer

  • T/WHAS 0004-2020 High Precision Color Analyzer
  • T/ZSA 96.4-2021 Test methods for dialyzer — Part 4:Performance parameters of solute reduction ratio
  • T/NBPIA 005.4-2021 Test methods for performance parameters of dialyzer Part 4: solute reduction ratio
  • T/BSRS 028-2020 Technical specification for analysis of gamma gross activity concentration in liquid effluents for nuclear power plants
  • T/CCAS 006-2018 Validation and comprehensive evaluation specification of laser particle size analyzer (wet method)
  • T/CHES 75-2022 Water Quality Determination of Chemical Oxygen Demand Continuous Flow Analysis Spectrophotometric Method

PL-PKN, Oxygen Analyzer

  • PN H04913-07-1988 Chemical analysis of zinc concentrates Determination of calcium and magnesium oxides
  • PN Z04092-08-1989 Air purity protection Tests for nitric acid and nitrogen oxides Determination of nitrogen dioxide in ambient air (imision) by spectrophotometric method with passive sampling
  • PN T06513-02-1990 Measurement of redox potential value Industrial analyzers
  • PN Z04158-02-1986 Air purity protection ests for ethers etermination of diethyl ether in work laces by gas chromatography with ample enrichment
  • PN K02505-1993 Rolling stock. Concentration carbon monoxide and carbon dioxide emitted by pyrolysis or combustion of materials. Requirements and tests
  • PN G02800-1991 Mining oxygen analysers with electrochemical sensors. General requirements and tests
  • PN Z04159-10-1989 Air purity protection ests for phenol etermination of phenol in permanent esidence area air by gas hromatography with sample nrichment
  • PN Z04045-10-1990 Air purity protection Tcsts lor aldehydes Dctermination of formaldehyde in pcrmanent residence area air by uas chromatooraphy with sample cnrichment
  • PN Z04015-05-1989 Air purity protectión Tests for sulphur and its compounds Determination of carbon disulphide in ambient air (imision) by gas chromatography with sample enrichment
  • PN Z04152-10-1992 Air purity protection ests for styrene etermination of styrene in permanent esidence area air by gas hromatography with sample nrichment
  • PN Z04188-02-1988 Air purity protection ests for 1,3-propane sultone etermination of 1,3-propane ultone at work places by gas hromatography with sample nrichment

Professional Standard - Chemical Industry, Oxygen Analyzer

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Oxygen Analyzer

KR-KS, Oxygen Analyzer

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Oxygen Analyzer

  • GB/T 34796-2017(英文版) Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry
  • GB/T 41949-2022 Particle─Laser particle size analyser─Technical requirements
  • GB/T 6609.5-1986 Methods for chemical analysis of aluminium oxide--The flame photometric method for the determination of sodium oxide content
  • GB/T 6609.6-1986 Methods for chemical analysis of aluminium oxide--The flame photometric method for the determination of potassium oxide content
  • GB/T 29189-2012 Thermo gravimetric analysis(TGA) for determination of oxidation temperature and ash content of carbon nanotubes
  • GB/T 6609.3-1986 Methods for chemical analysis of aluminium oxide--The molybdenum blue photometric method for the determination of silicon dioxide content
  • GB/T 6098.1-1985 Test method for length of cotton fibres--Roller analyser
  • GB/T 11606.6-1989 The method of environmental test for analytical instruments--Damp heat, steady state
  • GB/T 11606.5-1989 The method of environmental test for analytical instruments--Change of temperature test
  • GB/T 6609.12-1986 Methods for the chemical analysis of aluminium oxide--The atomic absorption spectrophotometric method for the determination of zinc oxide content
  • GB/T 6609.13-1986 Methods for the chemical analysis of aluminium oxide--The atomic absorption spectrophotometric method for the determination of calcium oxide content
  • GB/T 6609.27-2004 Chemical analysis methods and determination of physical performance of alumina Particle size analysis-Sieving method
  • GB/T 18116.3-2000 Yttrium-europium oxide-Determination of europium oxide content-Fluorescent spectrophotometric method
  • GB/T 6609.17-1986 Methods for the chemical analysis of aluminium oxide--The molybdenum blue photometric method for the determination of phosphorus pentoxide content
  • GB/T 6609.11-1986 Methods for the chemical analysis of aluminium oxide--The atomic absorption spectrophotometric method for the determination of manganous oxide content
  • GB/T 7315.8-1987 Methods for chemical analysis of vanadium pentoxide--The atomic absorption spectrophotometric method for the determination of sodium oxide and potassium oxide contents
  • GB/T 6609.16-1986 Methods for the chemical analysis of aluminium oxide--The curcumin photometric method for the determination of boron trioxide content
  • GB/T 6609.4-1986 Methods for chemical analysis of aluminium oxide--The orthophenanthroline photometric method for the determination of ferric oxide content
  • GB/T 6610.3-2003 Chemical analysis methods of aluminium hydroxide-Determination of silicon dioxide content-Molybdenum blue photometric method
  • GB/T 6098.1-2006 Test method for length of cotton fibres.Part 1: Roller analyser
  • GB/T 6609.27-2023 Methods of chemical analysis and determination of physical properties of alumina Part 27: Particle size analysis and sieving method
  • GB/T 6609.27-2009 Chemical analysis methods and determination of physical performance of alumina.Part 27:Partical size analysis.Method using electriformed sieves
  • GB/T 6609.7-1986 Methods for chemical analysis of aluminium oxide--The trioctylphosphine oxide-thiocyanate photometric method for the determination of titanium dioxide content
  • GB/T 7315.7-1987 Methods for chemical analysis of vanadium pentoxide--The AgDDTC spectrophotometric method for the determination of arsenic content
  • GB/T 7315.2-1987 Methods for chemical analysis of vanadium pentoxide--The molybdenum blue spectrophotometric method for the determination of silicon content
  • GB/T 5195.8-1985 Methods for chemical analysis of fluor-spar--The molybdenum blue photometric method for the determination of silicon dioxide content
  • GB/T 12690.29-2000 Rare earth metals and their oxide Determination of cerium oxide content-Fluorescent spectrophotometric method
  • GB/T 6610.4-2003 Chemical analysis methods of aluminium hydroxide Determination of ferric oxide content-Orthophenanthroline photometric method
  • GB/T 6609.8-1986 Methods for chemical analysis of aluminium oxide--The diphenyl carbazide photometric method for the determination of chromium sesquioxide content
  • GB/T 6609.15-1986 Methods for the chemical analysis of aluminium oxide--The ferric thiocyanate photometric method for the determination of chlorine content
  • GB/T 6901.8-1986 Silica refractories--Determination of calcium oxide content--Atomic absorption spectrophotometric method
  • GB/T 6901.9-1986 Silica refractories--Determination of potassium oxide and sodium oxide content--Atomic absorption spectrophotometric method
  • GB/T 3885.1-1983 Methods for chemical analysis of spodumenite and lepidolite concentrates--The atomic absorption spectrophotometric method for the determination of lithium oxide,sodium oxide and potassium oxide contents

BE-NBN, Oxygen Analyzer

  • NBN T 63-123-1980 Surface active agents - Analysis of soaps - Determination of low contents of free glycerol - Spectrophotometric method

IN-BIS, Oxygen Analyzer

Military Standard of the People's Republic of China-General Armament Department, Oxygen Analyzer

Professional Standard - Environmental Protection, Oxygen Analyzer

  • HJ/T 99-2003 The technical requirement for water quality automatic analyzer of dissolved oxygen(DO)

GB-REG, Oxygen Analyzer

API - American Petroleum Institute, Oxygen Analyzer

  • API RP 550 P2 S5-1983 Manual on Installation of Refinery Instruments and Control Systems - Part 11-Process Stream Analyzers Section 5-0xygen Analyzers (FOURTH EDITION)

CU-NC, Oxygen Analyzer

  • NC 44-08-1-1986 Ores. Cobalt and Nickel Sulfide Concentrate. Gravimetric Determination of Humidity
  • NC 57-98-4-1986 Clinical Methods and Ais Photometric Determination of Thymol Turbidness in Human Serum. Chemical Analysis Method
  • NC 76-05-1985 Foodstuffs. B1 and G1, Aflatoxins and A Ocratoxin. Spectrophotometric Determination of Concentration and Chromatographic Purity Degree
  • NC 20-06-24-1987 Medical Sciences. Electrolytic and Basic Acid Equilibrium Study. Determination of Ion Potassium Concentration. Chemical Analysis Method

BELST, Oxygen Analyzer

  • STB 1874-2008 Water natur, drinking and effluent. Methods of implementation measurements of mass concentration of arsenic by stripping voltammetric analysis on analysers type ТА
  • STB 17.13.05-45-2016 Environmental protection and nature use. Analytical control and monitoring. Water quality. Determination of the concentration of total iron photometrically with sulfosalicylic acid
  • STB 17.13.05-46-2016 Environmental protection and nature use. Analytical control and monitoring. Water quality. Determination of calcium, magnesium concentration by titrimetric method

International Organization for Standardization (ISO), Oxygen Analyzer

  • ISO 3930:1976 Road vehicles — Carbon monoxide analyser equipment — Technical specifications
  • ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
  • ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
  • ISO 7767:1988 Oxygen analyzers for monitoring patient breathing mixtures; safety requirements
  • ISO 9285:1997 Abrasive grains and crude - Chemical analysis of fused aluminium oxide
  • ISO 2926:1974 Aluminium oxide primarily used for the production of aluminium; Particle size analysis; Sieving method
  • ISO 6767:1990 Ambient air; determination of the mass concentration of sulfur dioxide; tetrachloromercurate (TCM)/pararosaniline method
  • ISO 4221:1980 Air quality; Determination of mass concentration of sulphur dioxide in ambient air; Thorin spectrophotometric method
  • ISO/CD 17973 Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
  • ISO 11564:1998/cor 1:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method; Technical Corrigendum 1
  • ISO 17973:2016 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
  • ISO 17973:2002 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
  • ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 15472:2010 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
  • ISO 15472:2001 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales

CEN - European Committee for Standardization, Oxygen Analyzer

  • PREN 17351-2019 Bio-based products - Determination of the oxygen content using an elemental analyser

RU-GOST R, Oxygen Analyzer

  • GOST R ISO 15337-2013 Ambient air. Gas phase titration. Calibration of analysers for ozone
  • GOST R 8.924-2016 State system for ensuring the uniformity of measurements. Ozone analyzers. Verification procedure
  • GOST 32930-2014 Ethanol from food raw material, strong drinks. Spectrophotometric method for determination of the mass concentration of furfurol
  • GOST R 8.754-2011 State system for ensuring the uniformity of measurements. Analyzers of oxygen dissolved in water. Verification procedure
  • GOST R 8.766-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration dissolving in water gasses (oxygen, hydrogen)
  • GOST 8.652-2016 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration of dissolving in water gasses (oxygen, hydrogen)
  • GOST R 8.791-2013 State system for ensuring the uniformity of measurements. Radioisotope and piezobalance analyzers for mass concentration of aerosol particles in air of the working zone. The method of verification

International Federation of Trucks and Engines, Oxygen Analyzer

生态环境部, Oxygen Analyzer

  • HJ/T 98-2003 Technical requirements for automatic turbidity water quality analyzers

Professional Standard - Electron, Oxygen Analyzer

  • SJ/T 10898-1996 Spectrophotometric analysis of iron oxide and titania in electronic glass

GM Europe, Oxygen Analyzer

US-CFR-file, Oxygen Analyzer

  • CFR 40-1065.284-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.284:Zirconia (ZrO2) analyzer.

Professional Standard - Nuclear Industry, Oxygen Analyzer

  • EJ/T 746-1992 Infrared Absorption Method for Heavy Water Concentration Analysis in Primary Circuit of Heavy Water Research Reactor

Professional Standard - Grain, Oxygen Analyzer

  • LS/T 6106-2012 Automatic Titration Analyzer Method for Determination of Peroxide Value of Animal and Vegetable Fats and Fats
  • LS/T 6101-2002 Determination of pasting properties of cereals (rapid viscosity analyzer method)
  • LS/T 6107-2012 Automatic Titration Analyzer Method for Determination of Acid Value and Acidity of Animal and Vegetable Fats and Fats

工业和信息化部/国家能源局, Oxygen Analyzer

  • JB/T 12962.3-2016 Energy dispersive X-ray fluorescence spectrometer Part 3: Coating thickness analyzer

IEC - International Electrotechnical Commission, Oxygen Analyzer

  • IEC 60659:1979 Test Methods for Multichannel Amplitude Analyzers (Edition 1.0)

Professional Standard - Commodity Inspection, Oxygen Analyzer

  • SN/T 3128-2012 Determination of oxygen element in organic chemicals.Elemental analyzer method

CZ-CSN, Oxygen Analyzer

  • CSN 70 0634 Cast.1-1976 Chemical analysis of glass. Determinat- ion of manganese oxide, Photometric method
  • CSN 70 0641 Cast.1-1976 Chemical analysis of glass. Determinat- ion of sodium and potassium oxide. Fláme photometric method
  • CSN 65 1055-1981 Aluminium oxide, Determina- oin of zinc oxide. Atomic bsorption, photometric and olarografie methods
  • CSN 70 0660 Cast.1-1976 Glass testing. Chemical analysis of glass. Determination of chromium sesquioxide. Photometric method
  • CSN 70 0629 Cast.1-1990 Glass testing methods. Chemical analysis of glass. Determination of titanium dioxide. Photometric method with tiron
  • CSN 42 0641 Cast.12-1984 Nickel alloys. Determination of sulphur by the titrimetric method, photometric method and methods with the use of automatic analyzers
  • CSN 70 0629 Cast.2-1976 Chemical analysis of glass. Determinat- ion of titanium dioxide. Photometric method with chromotropic acid
  • CSN 70 0628 Cast.3-1976 Chemical analysis of glass.Determination of aluminium oxide. Photometric method with chromazurol S.
  • CSN 70 0626 Cast.1-1976 Glass testing. Chemical analysis of glass. Determination of iron(III)-oxide. Photometric method with 2,2-bipyridine
  • CSN 70 0623 Cast.3-1986 Chemical analysis of glass. Determination of borio oxide. Photometric mothod with azomethin H.

未注明发布机构, Oxygen Analyzer

  • BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
  • DIN IEC 1342:1996 Nuclear instrumentation — Multichannel! pulse height analyzers — Main characteristics, technical requirements and test methods
  • DIN IEC 746-4:1996 Expression of Performance of electrochemical analyzers — Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Oxygen Analyzer

  • GB/T 6098-2018 Test method for length of cotton fibres—Roller analyser
  • GB/T 32999-2016 Surface chemical analysis—Depth profiling—Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer

Jiangsu Provincial Standard of the People's Republic of China, Oxygen Analyzer

  • DB32/T 3595-2019 Elemental analyzer method for the determination of carbon, hydrogen, nitrogen, sulfur and oxygen content in graphene materials

Professional Standard - Non-ferrous Metal, Oxygen Analyzer

  • YS/T 568.3-2008 Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of silicon content.Spectrophotometric method with the reduced silicomolybdic complex
  • YS/T 705-2009 Analysis methods of aluminum hydroxide for filler conductance.Determination of chrominance
  • YS/T 534.3-2006 Aluminum Hydroxide Chemical Analysis Method Molybdenum Blue Photometric Determination of Silica Content
  • YS/T 568.10-2008 Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of manganese content.Potassium periodate spectrophotometric method
  • YS/T 568.2-2008 Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of iron content.Sulfosal icylic acid spectrophotometric method
  • YS/T 738.4-2010 Analysis method for aluminum hydroxide for filler- Part 4: Determination method of viscosity
  • YS/T 534.3-2007 Chemical analysis methods of aluminium hydroxide.Part 3:Determination of silicon dioxide content.Molybdenum blue photometric method
  • YS/T 568.6-2008 Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of titamium content.Diantipyrylmethane spectrophotometric method
  • YS/T 534.4-2006 Aluminum Hydroxide Chemical Analytical Method for the Determination of Ferric Oxide by O-Phenanthrophenanthrene Spectrophotometry
  • YS/T 568.11-2008 Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of nickle content.α-Furil dioxime spectrophotometric method
  • YS/T 509.1-2006 Methods for chemical analysis of spodumene and lepidolite concentrates - Determination of lithium oxide, sodium oxide and potassium oxide by atomic absorption spectrophotometry

Standard Association of Australia （SAA）, Oxygen Analyzer

  • AS 3580.4.1:2008 Methods of sampling and analysis of ambient air - Determination of sulfur dioxide - Direct reading instrumental method
  • AS 3580.6.1:2011
  • AS 3580.6.1:1990 Methods for sampling and analysis of ambient air - Determination of ozone - Direct-reading instrumental method
  • AS 3580.7.1:2011
  • AS 3580.5.1:2011
  • AS 3580.7.1:2011/Amdt 1:2012
  • AS 3580.6.1:2023 Methods for sampling and analysis of ambient air, Method 6.1: Determination of ozone — Direct-reading instrumental method
  • AS 3580.7.1:1992 Methods for sampling and analysis of ambient air - Determination of carbon monoxide - Direct-reading instrumental method
  • AS 2365.2:1993 Methods for the sampling and analysis of indoor air - Determination of carbon monoxide - Direct-reading portable instrument method
  • AS 2365.2:1993(R2014)
  • AS 3580.5.1:2023 Methods for sampling and analysis of ambient air, Method 5.1: Determination of oxides of nitrogen — Direct-reading instrumental method
  • AS 3580.4.1:2023 Methods of sampling and analysis of ambient air, Method 4.1: Determination of sulfur dioxide — Direct reading instrumental method
  • AS 3580.7.1:2023 Methods for sampling and analysis of ambient air, Method 7.1: Determination of carbon monoxide — Direct-reading instrumental method
  • AS/NZS 3580.12.1:2001 Methods for sampling and analysis of ambient air - Determination of light scattering - Integrating nephelometer method

VN-TCVN, Oxygen Analyzer

  • TCVN 5978-1995 Air quality.Determination of mass concentration of sulphur dioxide in ambient air.Thorin spectrophotometry method

Society of Automotive Engineers (SAE), Oxygen Analyzer

  • SAE ARP4252-1989 Instrumental Methods of Determining Surface Cleanliness R(1995)

Professional Standard - Machinery, Oxygen Analyzer

  • JB/T 11938-2014 Ammonia-nitrogen automatic analyzers for laboratory.Nessler's reagent spectrophotometry
  • JB/T 7948.9-1999 Methods for chemical analysis of melted welding fluxes.The flame photometric method for determination of sodium oxide and potassium oxide content
  • JB/T 7777.4-1995 Silver tin oxide indium oxide electrical contact material chemical analysis method PAN spectrophotometric determination of zinc content
  • JB/T 7777.4-2008 Test methods for chemical analysis of silver-tin oxide-indium oxide electric contact material.Part 4:Determination of zinc content

Professional Standard - Ferrous Metallurgy, Oxygen Analyzer

  • YB/T 5335-2006 Method for chemical analysis of vanadium pentoxide - Determination of potassium oxide and sodium oxide by atomic absorption spectrophotometry
  • YB/T 5334-2006 Vanadium Pentoxide Chemical Analysis Method AgDDTC Spectrophotometric Determination of Arsenic Content
  • YB/T 5046-1993 Molybdenum Oxide Block Chemical Analysis Method Malachite Green Spectrophotometric Determination of Antimony
  • YB/T 5329-2006 Method for chemical analysis of vanadium pentoxide Molybdenum blue spectrophotometry Determination of silicon content
  • YB/T 5045-1993 Molybdenum Oxide Block Chemical Analysis Method New Copper Reagent Spectrophotometric Determination of Copper

Professional Standard - Geology, Oxygen Analyzer

  • DZ/T 0064.3-2021 Groundwater Quality Analysis Methods Part 3: Determination of Temperature Thermometer (Pyrometer) Method

Professional Standard - Agriculture, Oxygen Analyzer

  • NY/T 1753-2009 Determination of the pasting poperties of rice.Rapid visco analyzer(RVA)method

TR-TSE, Oxygen Analyzer

  • TS 1945-1975 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — PARTICLE S?ZE ANALYSIS — SIEVING METHOD
  • TS 3654-1981 METHODS FOR THE ANALYSIS OF WATER DETERMINATION OF CHROMIUM CONTENT — Permanganate Oxidation Spectrofotometric Method

YU-JUS, Oxygen Analyzer

  • JUS H.B8.617-1979 Aluminium oxide primarily used for the production of ahiminium. Particle si?e analysis. Sieving metho?
  • JUS C.A1.155-1980 Methods for chemical analysis ofcopper and copper alloys. Spectrophotometric determination ofarsenic in copper (for bw concentrations ofarsenic)

ZA-SANS, Oxygen Analyzer

  • SANS 4044:2007 Methods for determination of fibre length by comb sorter diagram

Professional Standard - Textile, Oxygen Analyzer

  • FZ/T 20026-2013 Test method for fibre length and diameter of wool top & slivers.Optical analyser

NL-NEN, Oxygen Analyzer

  • NEN 11034-1-1993 Insulated electric cables.Measurement of smoke density when burned under defined conditions.Part 1:Test apparatus(IEC 1034-1:1990)

  oxygen concentration, oxygen concentration, Oxygen Analyzer, Oxygen concentration in oxygen pool, Oxygen concentration analysis, Oxygen concentration 25, Oxygen concentration measurement, Oxygen concentration, Oxygen meter, air oxygen concentration, Oxygen concentration measurement, Oxygen meter, air oxygen concentration, critical oxygen concentration, Oxygen pool concentration, Oxygen Analyzer, limiting oxygen concentration, Oxygen concentration in water, lowest oxygen concentration, Measuring oxygen concentration.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved