ZH
RU
ES
material technology
material technology, Total:268 items.
In the international standard classification, material technology involves: Wood-based panels, Power transmission and distribution networks, Magnetic materials, Plastics, Products of the textile industry, Materials for the reinforcement of composites, Road engineering, Electrical accessories, Insulating materials, Construction materials, Energy and heat transfer engineering in general, Miscellaneous domestic and commercial equipment, Surface treatment and coating, Road vehicle systems, Protective equipment, Powder metallurgy, Railway rolling stock, Semiconducting materials, Installations in buildings, Power stations in general, Interior finishing, Dentistry, Production of metals, Rubber and plastics products, Mining equipment, Semi-manufactures of timber, Structures of buildings, Burners. Boilers, Organic chemicals, Refractories, Non-metalliferous minerals, Paper and board, Paper products, Protection of and in buildings, Vocabularies, Data storage devices, Mining and quarrying, Gas and steam turbines. Steam engines, Transport, Environmental protection, Seals, glands, Shafts and couplings, Electrical engineering in general, Hydraulic construction, Radiation protection, Shipbuilding and marine structures in general, Materials for aerospace construction, Bearings, Solar energy engineering, Wood technology processes, Coatings and related processes used in aerospace industry, Adhesives, Electrical equipment for working in special conditions, Photography, Nuclear energy engineering, Terminology (principles and coordination), Iron and steel products, Fluid storage devices, Road vehicles in general, Non-destructive testing, Wood, sawlogs and sawn timber, Pharmaceutics, Welding, brazing and soldering, Printed circuits and boards, Applications of information technology, Laboratory medicine, Aerospace engines and propulsion systems, Protection against crime, Barrels. Drums. Canisters, Wastes, Fasteners for aerospace construction, Farm buildings, structures and installations.
YU-JUS, material technology
- JUS B.G5.021-1986 Refractories. Dunit Technical re quirements
- JUS U.D0.001/1-1987 Materials for timberstructures. Technical requirements for materials. Amendments
- JUS U.M9.015-1998 Fibrous building materials - Materials for thennal insulation - Technical requirements
- JUS U.D0.001-1983 Materijals for timber structures. Technical reguirements for materials
- JUS F.C2.401-1984 Fabrics for hospital bed linen. Technical requirements
- JUS B.B6.010-1984 Refractories. Dolomite. Technical reguirements
- JUS F.G2.020-1981 Bedding and bed linen. Filling materials for quilts, eiderdowns, pillovvs and mattresses. Technical requirements
Guangdong Provincial Standard of the People's Republic of China, material technology
Professional Standard - Electricity, material technology
- DL/T 380-2010 Technical condition of material for reduced ground resistance
- DL/T 776-2001 Technical requirements for insulation material of thermal power plants
- DL/T 777-2001 Technical requirements for boiler refractory of thermal power plants
- DL/T 902-2004 Technical requirements and test methods of abrasion resistant refractory material
- DL/T 949-2005 Standard for joint plastic sealant of hydraulic structure
- DL/T 1761-2017 Technical specifications for multi-cavity ceramic composite insulation materials for power plants
- DL/T 5273-2012 Technical specification of natural pozzolan for use in hydraulic concrete
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, material technology
- GB/T 24296-2009 Standard specifications for sintered soft magnetic materials
- GB/T 20235-2006 Technical specification for silver-tin oxide electric contact materials
- GB/T 15512-2009 Technical guides for evaluating the saving of iron and steel product in enterprise
- GB/T 11632-1989 Technical specifications of material of pressure hull structure for submersibles and underwater equipments
- GB/T 31389-2015 Technical requirements and evaluation methods of solar reflective materials for exterior walls and roofs
- GB/T 15663.9-1995 Terms relating to coal mining--Explosive material and blasting technique
- GB/T 17951-2000 Standard specifications for magnetically hard materials
- GB/T 17951-2005 Standard specification for magnetically hard materials
- GB 50290-1998 Technical standard for applications of geosynthetics
- GB/T 50290-2014 Technical specifications for the application of geosynthetics
RU-GOST R, material technology
- GOST 20437-1989 Moulding material AG-4. Specifications
- GOST 28005-1988 Carbonic fibre material Ural. Specifications
- GOST 28602.3-1990 Combined flexible materials for electrical insulation. Specifications
- GOST 20429-1984 Folgoisol. Specifications
- GOST 12.4.183-1991 System of safety standards. Materials for means of hands protection. Specifications
- GOST R 52575-2006 General use highways. Road marking materials. Technical requirements
- GOST 8705-1978 Nitrocellulosa covered binding material. Specifications
- GOST R 52575-2021 Automobile roads of general use. Road marking materials. Technical requirements
- GOST ISO 9333-2011 Dentistry. Brazing materials. Technical requirements. Test methods
- GOST R ISO 9333-2008 Dentistry. Brazing materials. Technical requirements. Test methods
- GOST R 57620-2017 Dentistry. Refractory investment and die material. Technical requirements. Test methods
- GOST 15045-1978 Quartz-feldspar raw materials for building ceramics. Specifications
- GOST 25710-1983 Sinle-layer filter paper for the cigarette filters. Specifications
- GOST 31573-2012 Dental impression elastomeric materials. Technical requirements. Test methods
- GOST 33387-2015 Automobile roads of general use. Deicing materials. Technical requirements
- GOST R 51202-1998 Dental resin restorative materials. Technical requirements. Test methods
- GOST ISO 11244-2011 Dental brazing investments. Technical requirements. Test methods
- GOST R 57401-2017 Silicone rubber low temperature vulcanizing low outgassing materials. Technical requirements
- GOST R 52578-2006 Dental impression elastomeric materials. Technical requirements. Test methods
- GOST 31574-2012 Dental resin restorative materials. Technical requirements. Test methods
- GOST R ISO 1563-2005 Dental alginate impression material. Technical requirements. Test methods
- GOST 32830-2014 Automobile roads of general use. Road marking materials. Technical requirements
- GOST 27939-1988 Carbonfibre composite EPAN. Specifications
- GOST ISO 1563-2011 Dental alginate impression material. Technical requirements. Test methods
- GOST R 56070-2014 Wood waste. Technical conditions
- GOST 28579.3.3-1990 Insulating rigid mica materials for heating equipment. Specification
- GOST R EN 40-7-2013 Fibre reinforced polymer composite of lighting columns. Technical specifications
- GOST 23558-1994 Crushed stone-gravel-sandy mixtures, and soils treated by inorganic binders for road and airfield construction. Specifications
- GOST 25795-1983 Raw clay in the production of clay powders for drilling muds. Specifications
- GOST 23827-1979 Thin wood raw material. Specifications
- GOST 25607-1994 Crushed stone-gravel-sandy mixtures for road and airfield surfacings and bases. Specifications
- GOST R 59179-2021 Automobile roads of general use. Polymeric materials applied for waterproofing bridge deck. Technical regulations
- GOST R ISO 28319-2021 Dentistry. Metal filler dental materials for laser welding. Technical requirements and test methods
- GOST 23551-1979 Wooden raw materials for manufacturing modified wood. Specifications
- GOST R 56419-2015 Automobile roads of general use. Geosynthetic materials for separation of pavement layers from mineral materials. Technical requirements
- GOST 24260-1980 Wood raw material for pirolysis and charring. Specifications
- GOST 5799-1978 Flasks for paints and varnishes. Specifications
- GOST 28804-1990 Moulding phenolic materials. General specifications
- GOST 26246.2-1989 Phenol-impregnated cellulose paper foil-clad electrical insulating material for printed plates, economic quality. Specifications
- GOST 26246.4-1989 Epoxide-impregnated glass fabric foil-clad electrical insulating material of general use for printed plates. Specifications
- GOST 17731-1979 Compound P-5-7 LDP. Specifications
- GOST 26246.1-1989 Phenol impregnated cellulose paper foil-clad electrical insulating material for printed plates, high electrical quality. Specifications
Indonesia Standards, material technology
- SNI 03-6751-2002 Specification of makadam penetration layer materials (lapen)
- SNI 03-6891-2002 Specification of grout for masonry work
- SNI 03-6750-2002 Specification of resurfacing one layer asphalt (burtu) and two layers asphalts (burda)
- SNI 03-6765-2002 Specification of bulding materials for fire prevention on housings and buildings
- SNI 13-4237-1996 Specification and test method for kaolin, plywood adhesive filler materials
- SNI 05-1341-1989 Steam boilers and pressure vessels, Specification material of seamless carbon steel tube for high pressure steam boilers
- SNI 03-6416.2-2000 Specification for joint materials of concrete dams - Part 2: Installation of waterstop for joints
SE-SIS, material technology
- MNC 10-1988 Metallic materials — Technical publications — Summary
- MNC 10 E-1988 Metallic materials — Technical publications — Summary
Professional Standard - Machinery, material technology
- JB/T 7097-2008 Specification for copper-bismuth-aluminium electric contact material
- JB/T 9550-1999 Technical specification for copper-bismuth-silver electrical contact materials
- JB/T 9550-2011 Technical specification for copper-bismuth-silver electrical contact materials
- JB/T 7523-1994 Technical requirements for materials used in penetrant testing
- JB/T 7096-1993 Copper bismuth cerium contact material specification
- JB/T 7097-1993 Copper bismuth aluminum contact material specification
- JB/T 9132-1999 Specifications for sintered ferrophosphor soft magnetic materials
- JB/T 4114-1999 Specifications for sintered iron soft magnetic materials
- JB/T 3063-2011 Specifications for sintered metal friction materials
- JB/T 9132-2022 Technical specifications for sintered iron-phosphorus soft magnetic materials
- JB/T 4114-2022 Technical specifications for sintered pure iron soft magnetic materials
- JB/T 3063-1996 Technical conditions for sintered metal friction materials
- JB/T 12073-2014 Specification for Silver-tungsten carbide electrical contacts
- JB/T 9139-1999 Specifications for sintered bronze structural materials
- JB/T 3578-2007 General technical rules for epoxy coating material on sliding lead-rail
- JB/T 3578-1991 General technical rules for sliding guide rail epoxy coating materials
- JB/T 3083-1993 Specifications for high alumina ceramic materials for spark plug insulators
- JB/T 8562-1997 Specifications for materials of zinc-aluminum alloy cages for rolling bearings
Professional Standard - Agriculture, material technology
- NY/T 2450-2013 Material and technology conditions of household biogas digester
- NY/T 805-2004 Specification of reflective material for solar cookers
Group Standards of the People's Republic of China, material technology
- T/JJSY 012-2022 Technical specification for general materials for reverse umbrellas
- T/SHDSGY 136-2023 New energy hydrogen fuel cell material technology
- T/SHDSGY 135-2023 New Energy Semiconductor Silicon Wafer Material Technology
- T/CBMCA 019-2021 Technical standard for medical clean room decoration materials
- T/SCSS 050-2017 Material technical requirements for big data computer room in smart city
- T/CNCA 002-2021 Technical specifications for gangue-based paste filling materials in coal mines
- T/CI 148-2023 Materials specification for optical aviation polycarbonate
- T/CBMF 176-2022 Technical specification for sulphur-aluminum ( iron ) cementitious materialsmade from solid waste
- T/GBA 0108-2022 Technical standard for green hotel interior decoration materials
- T/CEC 138-2017 Specifications for damping rubber materials for oil-immersed transformers
- T/BSRS 045-2020 Technical requirements of neutron absorbing materials used in spent fuel transport cask
- T/SDSIA 3-2016 Technical requirements for vacuum coating heat-absorbing materials for solar collectors
- T/CEEIA 577-2022 Electrode for iron chromium flow battery technical requirements and test
- T/CSAE 198-2021 Technical specification for high strength and toughness aluminum alloy materials for automobiles by high vacuum die casting
- T/CBMF 12-2016 The second generation of new dry process cement matching refractory technical acceptance regulations
- T/CBMF 14-2016 Regulations for technical acceptance of the second generation of Chinese float glass supporting refractory materials
- T/CEEIA 571-2022 Technical requirements of slow-release paste graphite resistance-reducing material for electrical device grounding
- T/CSBME 032-2021 Technical requirements for raw materials of medical four-arm polyethylene glycol succinimide glutarate
- T/CEC 189-2018 Specifications for ablation-resistant polytetrafluoroethylene composite materials for nozzles of arc extinguishing chambers for electrical equipment
- T/SHMHZQ 065-2021 Technical specification for building materials recovery
- T/GZZX 3-2018 Composite material street code technical specification
- T/CWAN 0079-2023 Raw and auxiliary materials for welding consumables- Technical requirements for procurement of auxiliary materials
Hebei Provincial Standard of the People's Republic of China, material technology
CZ-CSN, material technology
Professional Standard - Railway, material technology
- TB/T 3138-2006 Technical specification of flame retardant materials for railway locomotive and vehicle
- TB/T 2047.2-2011 Technical specification for materials used for non-destructive testing in railway.Part 2:Materials for penetrant testing
- TB/T 2047.1-2011 Technical specification for materials used for non-destructive testing in railway.Part 1:Materials for magnetic particle testing
- TB/T 2047.3-2011 Technical specification for materials used for non-destructive testing in railway.Part 3:Probes for ultrosonic testing
国家市场监督管理总局、中国国家标准化管理委员会, material technology
- GB/T 39802-2021 Technical requirements for thermal insulation material of urban heat-supplying
- GB/T 37187-2018 Technology requirement of the anti-corrosion materials for desulfurization chimneys
- GB/T 37264-2018 Classification and definition of the technology readiness levels for new materials
- GB/T 38090-2019 Technical requirements of permanent magnets for drive motor of electric vehicle
- GB/T 38191-2019 Plain bearings—Nickel alloy self-lubricated bearing material specifications
- GB/T 37235-2018 Specification for forensic examination of document material
- GB/T 17951-2022 Specification for magnetically hard materials
Professional Standard - Business, material technology
- SB/T 10727-2012 Technical requirements for environmentally friendly building and decorating materials
- SB/T 10727-2015 Technical requirements for environmentally friendly building materials and decorative materials
SAE - SAE International, material technology
International Organization for Standardization (ISO), material technology
- ISO 4823:2000/cor 1:2004 Dentistry - Elastomeric impression materials; Technical Corrigendum 1
- ISO 18902:2007/Cor 1:2009 Imaging materials - Processed imaging materials - Albums, framing and storage materials; Technical Corrigendum 1
- ISO 10139-1:2005/cor 1:2006 Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use; Technical Corrigendum 1
- ISO 22794:2007 Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file
- ISO 22803:2004 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
- ISO 10303-45:1998/Cor 1:1999 Industrial automation systems and integration - Product data representation and exchange - Part 45: Integrated generic resource: Materials; Technical Corrigendum 1
Professional Standard-Safe Production, material technology
- AQ 1087-2011 Technical specification of coal mine water shutoff polymer
- AQ 1088-2011 Technical specification of coal mine spraying polymer for sealing ventilation
- AQ/T 1088-2011 Technical conditions of polymer materials for coal mine spraying plugging
Shandong Provincial Standard of the People's Republic of China, material technology
- DB3713/T 268-2022 Technical specification for pasting materials for wood-based panels
- DB37/T 1315-2009 General technical specifications for wood-plastic composite materials
Association Francaise de Normalisation, material technology
- NF EN 60603-1:1998 Série aérospatiale - Matériaux caoutchouc - Spécification technique
- NF EN 60603-12:1998 Série aérospatiale - Matériaux caoutchouc - Spécification technique
- NF EN 3207:1998 Série aérospatiale - Matériaux caoutchouc - Spécification technique
- NF ETS 300046-5:1998 Série aérospatiale - Matériaux caoutchouc - Spécification technique
- NF ETS 300047-4:1998 Série aérospatiale - Matériaux caoutchouc - Spécification technique
- NF ETS 300047-5:1998 Série aérospatiale - Matériaux caoutchouc - Spécification technique
- NF EN 61032:1998 Série aérospatiale - Matériaux caoutchouc - Spécification technique
- NF ETS 300046-2:1998 Série aérospatiale - Matériaux caoutchouc - Spécification technique
- NF ETS 300047-1:1998 Série aérospatiale - Matériaux caoutchouc - Spécification technique
- NF L17-106:1997 Aerospace industry. NF L standardized rubber materials. Technical specification.
- NF L17-106:2012 Aerospace series - NF L standardized rubber materials - Technical specification
- NF L17-106:2019 Série aérospatiale - Matériaux caoutchouc normalisés NF L - Spécification technique
- NF EN 4260:2022 Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des spécifications techniques
- NF L10-018*NF EN 4260:2022 Aerospace series - Metallic materials - Rules for drafting and presentation of technical specifications
- NF EN 4387:2022 Série aérospatiale - Matériaux non métalliques - Règles pour la rédaction et la présentation des spécifications techniques
- XP PR EN 4260:1998 Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des spécifications techniques.
- NF L17-034*NF EN 4387:2022 Aerospace series - Non-metallic materials - Rules for drafting and presentation of technical specifications
- NF S91-155:1995 Implantation materials for bone reconstruction (packing, augmentation and regeneration) in oral and maxillofacial surgery. State of the art. Catalogue of materials. Methods of evaluation.
- NF EN ISO 22794:2009 Art dentaire - Matériaux implantables de comblement et de reconstruction osseuse en chirurgie orale et maxillofaciale - Contenu d'un dossier technique
- NF S91-155*NF EN ISO 22794:2009 Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file.
- NF S91-164*NF EN ISO 22803:2006 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
- NF L19-106:1995 Série aérospatiale - Matériaux alvéolaires à cellules tubulaires (M.A.C.T.) hexagonales soudées pour applications abradables - Spécification technique.
- NF L19-101-2:1992 Aerospace series. Honeycomb materials with tubular cells in aluminium alloys. Technical specification. Special requirements for hexagonal tubular cells.
- NF L19-103:1992 Aéronautique et espace - Matériaux alvéolaires à cellules tubulaires (M.A.C.T.) en matériaux composites et non métalliques imprégnés de résine thermodurcissable - Spécification technique - Exigences générales.
Military Standard of the People's Republic of China-General Armament Department, material technology
- GJB 9985-2021 Technical specifications for engineering camouflage radar absorbing materials
HU-MSZT, material technology
CH-SNV, material technology
Professional Standard - Aviation, material technology
- HB/Z 131-2004 Technical requirement for the selection of raw material of cast superalloys
- HB/Z 131-1988 Technical requirements for selecting raw materials for cast superalloys
Professional Standard - Construction Industry, material technology
- JG/T 333-2011 Technical specification of injection materials for repair of cracks in concrete
- JG/T 469-2015 Technical requirements of the materials for external thermal insulation composite systems based on cellular glass
- JG/T 316-2011 Technical requirements of instant leak-stoppage materials for remedial waterproofing
Hunan Provincial Standard of the People's Republic of China, material technology
- DB43/T 2454-2022 Technical requirements for heavy calcium granular filler materials for construction
交通运输部, material technology
- JT/T 1239-2019 Technical specifications of anti-icing coating materials for asphalt pavement
- JT/T 646.4-2016 Highway Sound Barriers Part 4: Technical Requirements and Testing Methods for Acoustic Materials
工业和信息化部, material technology
- YB/T 4638-2018 Technical specifications for refractory materials for top-fired hot blast stoves
ZA-SANS, material technology
- SANS 10349:2004 Fibre-reinforced plastics (FRP) composites - Glossary of technical terms
- SANS 44:2009 Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings
Professional Standard - Energy, material technology
- NB/T 42036-2014 Specification for metal of rotor of screw expanding machine
- NB/T 20341-2015 Technical specification for nuclear island building hole blocking material and caulking material of PWR nuclear power plants
Professional Standard - Traffic, material technology
- JT/T 646-2005 Specifications and examining methods for highway noise barriers materials
Shaanxi Provincial Standard of the People's Republic of China, material technology
- DB61/T 899-2013 Technical specifications for high damping rubber materials for transportation products
Professional Standard - Aerospace, material technology
- QJ 975-1986 MR-4 Technical conditions for high temperature resistant sealing, filling and bonding materials
水利部, material technology
- SL/T 807-2021 Technical specifications for epoxy resin grouting materials for hydraulic buildings
Professional Standard-Ships, material technology
- CB/T 4192-2011 Technical specifications of material of pressure hull structure for submersibles and underwater equipments
- CB/T 3940-2001 Technical requirements for class change of marine metallic material
API - American Petroleum Institute, material technology
- API PUBL 4671-1998 Technical Bulletin on Oxygen Releasing Materials for In Situ Groundwater Remediation
Xinjiang Provincial Standard of the People's Republic of China, material technology
- DB65/T 3683-2014 Technical specifications of raw materials for ground-use crystalline silicon photovoltaic modules
German Institute for Standardization, material technology
- DIN 65081:1995 Aerospace - Paints, varnishes and similar coating materials - Technical specification
- DIN EN 4260:2022-07 Aerospace series - Metallic materials - Rules for drafting and presentation of technical specifications; German and English version EN 4260:2022
- DIN 65124:2018-10 Aerospace series - Technical specifications for additive manufacturing of metallic materials with the powder bed process
- DIN EN 4260:2022 Aerospace series - Metallic materials - Rules for drafting and presentation of technical specifications; German and English version EN 4260:2022
- DIN EN 4387:2022-07 Aerospace series - Non-metallic materials - Rules for drafting and presentation of technical specifications; German and English version EN 4387:2022
- DIN EN 4387:2022 Aerospace series - Non-metallic materials - Rules for drafting and presentation of technical specifications; German and English version EN 4387:2022
- DIN EN 13121-1:2003 GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions; German version EN 13121-1:2003
- DIN EN ISO 22803:2006-01 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004); German version EN ISO 22803:2005
- DIN EN ISO 22794:2009-11 Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file (ISO 22794:2007, corrected version 2009-01-15); German version EN ISO 22794:2009
- DIN EN ISO 22803:2006 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004); English version of DIN EN ISO 22803:2006
- DIN EN ISO 22794:2007 Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file (ISO 22794:2007); German version EN ISO 22794:2007
- DIN EN 13121-1:2021 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria; German version EN 13121-1:2021
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, material technology
- GB/T 35684-2017 Technique requirements for explosion suppression material in fuel tank explosive atmospheres
IT-UNI, material technology
Professional Standard - Nuclear Industry, material technology
- EJ/T 469-1999 Specification for main bolting materials of safety class 1. equipments for pressurized water reactor nuclear power plants
- EJ/T 1123-2000 Specification for the magetic material of the CRDM for pressurized water reactor nuclear power plants
- EJ/T 1126-2000 Specification for safety - class. 2 bolting material used in pressure vessel for pressurized water reactor nuclear power plants
- EJ/T 486-1999 Specification for super-low carbon chromium-nickel austenitic stainless steel cladding material for pressurized water reactor nuclear power plants
- EJ 469-1989 Technical Specifications for Main Bolt Materials of Safety Level 1 Equipment of 300MW Pressurized Water Reactor Nuclear Power Plant
- EJ 486-1989 Technical specifications for ultra-low carbon Cr-Ni austenitic stainless steel surfacing materials for 300,000-kilowatt pressurized water reactor nuclear power plants
European Committee for Standardization (CEN), material technology
- EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
- EN ISO 22794:2009 Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file
- EN ISO 22803:2005 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
Beijing Provincial Standard of the People's Republic of China, material technology
- DB11/ 308-2005 The Technical Requirement and Test Methods forSynthetical Material Surface of Outdoor Track and Field area
- DB11/T 308-2005 Technical requirements and inspection methods for ground layer synthetic materials of outdoor track and field venues
RO-ASRO, material technology
- STAS 4473/2-1979 SILICA REFRACTORIES FOR GLASS SMEI.TING KILNS Technical requirements
- STAS 6790-1989 ELECTRICAL INSULATING MATE- RIALS USED IN ELECTRICAL EQUIPMENTS FOR POTENTIAL EXPLOSIVE ATMOSPHERE Technical requirements and checking up methods
- STAS 6822-1-1983 HARD MAGNETIC MATERIALS General technical requirements
- STAS 6822-1983 HARD MAGNETIC MATERIALS General technical requiremenls
- STAS 3471-1985 EL ECTRICAL INSULATING CERAMIC MATERIALS General tcchnical rtquirements
ES-AENOR, material technology
British Standards Institution (BSI), material technology
- BS EN 4260:2022 Aerospace series. Metallic materials. Rules for drafting and presentation of technical specifications
- BS EN 13121-1:2003 GRP tanks and vessels for use above ground. Raw materials. Specification conditions and acceptance conditions
- BS EN 4387:2022 Aerospace series. Non-metallic materials. Rules for drafting and presentation of technical specifications
- PD IEC/TR 62899-250:2016 Printed electronics. Material technologies required in printed electronics for wearable smart devices
- BS EN ISO 22803:2005 Dentistry. Membrane materials for guided tissue regeneration in oral and maxillofacial surgery. Contents of a technical file
- BS EN ISO 22803:2006 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
- BS EN ISO 22794:2007 Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file
- BS EN ISO 22794:2009 Dentistry. Implantable materials for bone filling and augmentation in oral and maxillofacial surgery. Contents of a technical file
ES-UNE, material technology
- UNE-EN 4260:2022 Aerospace series - Metallic materials - Rules for drafting and presentation of technical specifications (Endorsed by Asociación Española de Normalización in June of 2022.)
- UNE-EN 4387:2022 Aerospace series - Non-metallic materials - Rules for drafting and presentation of technical specifications (Endorsed by Asociación Española de Normalización in June of 2022.)
GOSTR, material technology
- PNST 251-2017 Nanomaterials. Nanocomposite material based on polyethylene. Technical requirements and test methods
- GOST R 57924-2017 Polymer composites. Methods for determination of flammability of the materials for used in aviation technics
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, material technology
- PREN 4260-1996 Aerospace Series Metallic Materials Rules for Drafting and Presentation of Technical Specifications (Edition P 1)
- PREN 4387-1997 Aerospace Series Non-Metallic Materials Rules for Drafting and Presentation of Technical Specifications (Edition P1)
未注明发布机构, material technology
- ISO 13583-2:2003/Cor 1:2004 Centrifugally cast steel and alloy products — Part 2: Heat resistant materials
- BS EN ISO 22794:2009(2015) Dentistry — Implantable materials for bone filling and augmentation in oral and maxillofacial surgery — Contents of a technical file
Professional Standard - Medicine, material technology
- YY/T 0526-2009 Dentistry Membrane materials for guided tissue regeneration in oral and maxillofacial surgery Contents of a technical file
- YY/T 0525-2009 Dentistry Implantable materials for bone filling and augmentation in oral and maxillofacial surgery Contents of a technical file
Aerospace, Security and Defence Industries Association of Europe (ASD), material technology
- ASD-STAN PREN 4260-1996 Aerospace Series Metallic Materials Rules for Drafting and Presentation of Technical Specifications (Edition P 1)
- ASD-STAN PREN 6044-1-1995 Aerospace Series Carbon Fibre Reinforced Epoxy Prepreg Technical Specification Part 1: General Requirements (Edition P1)
Danish Standards Foundation, material technology
- DS/EN ISO 22803:2005 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
- DS/EN ISO 22794:2009 Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file
- DS/EN 2833-005:2013 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate
AENOR, material technology
- UNE 68402:2005 Radio frequency identification of animals. Technical requirements of the materials used in the electronic identification of animals. Identifiers and readers.
- UNE-EN ISO 22803:2006 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004)
Korean Agency for Technology and Standards (KATS), material technology
- KS P ISO 22803:2019 Dentistry ― Membrane materials for guided tissue regeneration in oral and maxillofacial surgery ― Contents of a technical file
- KS P ISO 22794:2020 Dentistry — Implantable materials for bone filling and augmentation in oral and maxillofacial surgery — Contents of a technical file
- KS P ISO 22803:2013 Dentistry-Membrane materials for guided tissue regeneration in oral and maxillofacial surgery-Contents of a technical file
- KS P ISO 22794:2009 Dentistry－Implantable materials for bone filling and augmentation in oral and maxillofacial surgery－Contents of a technical file
KR-KS, material technology
- KS P ISO 22803-2019 Dentistry ― Membrane materials for guided tissue regeneration in oral and maxillofacial surgery ― Contents of a technical file
- KS P ISO 22794-2020 Dentistry — Implantable materials for bone filling and augmentation in oral and maxillofacial surgery — Contents of a technical file
International Electrotechnical Commission (IEC), material technology
- IEC TR 62899-250:2016 Printed electronics - Part 250: Material technologies required in printed electronics for wearable smart devices
Society of Automotive Engineers (SAE), material technology
Professional Standard - Petroleum, material technology
- SY/T 0599-2018 Sulfide stress cracking resistant metallic material requirements for gas surface equipment
CEN - European Committee for Standardization, material technology
- EN ISO 22794:2007 Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file
Lithuanian Standards Office , material technology
- LST EN ISO 22803:2006 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004)
中华全国供销合作总社, material technology
- GH/T 1340-2021 Technical requirements for processing cotton packaging materials
Association of German Mechanical Engineers, material technology