ZH
RU
ES
plastic glass
plastic glass, Total:500 items.
In the international standard classification, plastic glass involves: Glass, Kitchen equipment, Processes in the glass and ceramics industries, Analytical chemistry, Miscellaneous domestic and commercial equipment, Reinforced plastics, Bottles. Pots. Jars, Measurement of volume, mass, density, viscosity, Plastics, Furniture, Pipeline components and pipelines, Plant and equipment for the food industry, Sensory analysis, Construction materials, Products of the chemical industry, Rubber and plastics products, Installations in buildings, Aircraft and space vehicles in general, Road vehicle systems, Sacks. Bags, Small craft, External sewage systems, Interior finishing, Materials and articles in contact with foodstuffs, Materials for the reinforcement of composites, Materials for aerospace construction, Petroleum, petroleum products and natural gas handling equipment, Fluid storage devices, Ventilators. Fans. Air-conditioners, Chipless working equipment, Insulating materials, Elements of buildings, ENERGY AND HEAT TRANSFER ENGINEERING, Radiation measurements, Shipbuilding and marine structures in general, Raw materials for rubber and plastics, Cinematography, Electricity. Magnetism. Electrical and magnetic measurements, Thermodynamics and temperature measurements, Protection of and in buildings.
AR-IRAM, plastic glass
工业和信息化部, plastic glass
Group Standards of the People's Republic of China, plastic glass
Korean Agency for Technology and Standards (KATS), plastic glass
- KS L 2408-2015 Glass tumblers
- KS L 2408-2010 Glass tumblers
- KS G 3301-1995 Glass tumblers
- KS L 2408-2015(2020) Glass tumblers
- KS L 2502-2001 THE GRADES OF GLASS CUP
- KS L ISO 3819:2006 Laboratory glassware－Beakers
- KS L ISO 3819:2022 Laboratory glassware — Beakers
- KS L ISO 3819-2006(2021) Laboratory glassware－Beakers
- KS L ISO 3819-2006(2016) Laboratory glassware－Beakers
- KS Q ISO 3591:2003 Sensory analysis-Apparatus-Wine-tasting glass
- KS M 3535-2009 Pultruded fibre reinforced plastics
- KS M 3333-2005 Plastics piping systems for pressure and non-pressure drainage and sewerage－Glass reinforced thermosetting plastics(GRP) systems based on unsaturated polyester(UP) resin
- KS F 4802-2022 Glassfiber reinforced plastic corrugated sheets
- KS F 4802-2011(2021) Glassfiber-reinforced plastic corrugated sheets
- KS M 3333-1995 Plastics piping systems for pressure and non-pressure drainage and sewerage－Glass reinforced thermosetting plastics(GRP) systems based on unsaturated polyester(UP) resin
- KS M 3380-2009 General rules for testing methods of glass fiber reinforced plastics
- KS F 4802-2011(2016) Glassfiber-reinforced plastic corrugated sheets
- KS M ISO 8605:2006 Textile-glass-reinforced plastics-Sheet moulding compound(SMC)-Basis for a specification
- KS M ISO 8605:2016 Textile-glass-reinforced plastics－Sheet moulding compound(SMC)－Basis for a specification
- KS Q ISO 16657:2007 Sensory analysis－Apparatus－Olive oil tasting glass
- KS M ISO 1172-2002(2017) Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content-Calcination methods
- KS M ISO 1172:2022 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
- KS M 3380-2016(2021) General rules for testing methods of glass fiber reinforced plastics
- KS M 3380-2022 General rules for testing methods of glass fiber reinforced plastics
- KS M ISO 7510:2004 Plastics piping systems－Glass-reinforced plastics(GRP) components－Determination of the amounts of constituents using the gravimetric method
- KS M ISO 7510:2019 Plastics piping systems — Glass-reinforced plastics(GRP) components — Determination of the amounts of constituents
- KS R ISO 15082:2018 Road vehicles — Tests for rigid plastic safety glazing materials
- KS F 2245-2003 MEASURING METHOD FOR VOID CONTENT OF GLASS FIBER REINFORCED PLASTICS
- KS M ISO 7685:2004 Plastics piping systems－Glass-reinforced thermosetting plastics(GRP) pipes－Determination of initial specific ring stiffness
- KS M 3385-2004 Testing method for transverse shear strength of glass fiber reinforced plastics
- KS M 3386-2004 Testing method for in-plane shear properties of glass fiber reinforced plastics
- KS M 3384-2004 Testing method for apparent interlaminar shear strength of glass fiber reinforced plastics
- KS M 3381-2009 Testing method for tensile properties of glass fiber reinforced plastics
- KS M 3383-2009 Testing methods for compressive properties of glass fiber reinforced plastics
- KS M 3381-2004 Testing method for tensile properties of glass fiber reinforced plastics
- KS M 3383-2004 Testing methods for compressive properties of glass fiber reinforced plastics
- KS M 3382-2004 Testing methods for flexural properties of glass fiber reinforced plastics
- KS M 3387-2016(2021) Testing method for Barcol hardness of glass fiber reinforced plastics
Professional Standard - Light Industry, plastic glass
Japanese Industrial Standards Committee (JISC), plastic glass
- JIS S 2043:1994 Glass tumblers
- JIS S 2043:2001 Glass tumblers
- JIS K 7011:1989 Glass fiber reinforced plastics for structural use
- JIS A 5701:1995 Glassfiber reinforced plastic corrugated sheets
- JIS K 7052:1999 Textile glass reinforced plastics -- Prepregs, moulding compounds and laminates -- Determination of the textile-glass and mineral-filler content -- Calcination method
- JIS F 0303:1992 Ships made of fibreglass reinforced plastics -- Design of earth
- JIS K 7051:1987 General rules for testing methods of glass fiber reinforced plastics
- JIS K 7054:1995 Testing method for tensile properties of glass fiber reinforced plastics
- JIS K 7053:1987 Measuring method for void content of glass fiber reinforced plastics
- JIS K 7056:1995 Testing method for compressive properties of glass fiber reinforced plastics
- JIS A 5712:1994 Glass fiber reinforced plastic bathtubs connected with floor
German Institute for Standardization, plastic glass
- DIN 12672:2001 Laboratory glass or plastics ware - Imhoff sedimentation cones
- DIN 12331:1988 Laboratory glassware; beakers
- DIN EN ISO 3819:2016-05 Laboratory glassware - Beakers (ISO 3819:2015); German version EN ISO 3819:2015
- DIN EN ISO 1172:1998-12 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods (ISO 1172:1996); German version EN ISO 1172:1998 / Note: To be replaced by DIN EN ISO 11...
- DIN EN 1119:2009-07 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements; German version EN...
- DIN 53390:1988 Testing of glass fibre reinforced plastics; bending test on unidirectional glass fibre reinforced laminated plastics in the form of round bars
- DIN 61853-2:1987-04 Textile glass; textile glass mats for plastics reinforcement; classification and application
- DIN EN ISO 1172:2022-11 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO/DIS 1172:2022); German and English version prEN ISO 1172:2022 / Note: Date of issu...
- DIN 61853-1:1987-04 Textile glass; textile glass mats for plastics reinforcement; technical delivery conditions
- DIN 61853-2:1987 Textile glass; textile glass mats for plastics reinforcement; classification and application
- DIN 61853-1:1987 Textile glass; textile glass mats for plastics reinforcement; technical delivery conditions
- DIN 65060:1991 Aerospace; textile glass; textile glass filament rovings for reinforcement of plastics; technical specification
- DIN 12672:2001-10 Laboratory glass or plastics ware - Imhoff sedimentation cones
- DIN 61854-2:1987-04 Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; types
- DIN 52354:2020 Headform impact test with deceleration measurement on glass and plastic safety panes for vehicle glazing
- DIN 10956:2007 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use
- DIN 10956:1975 Apparatus for sensory analysis; universal testing glasses and lids, requirements, instructions for use
- DIN EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
- DIN 61854-2:1987 Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; types
- DIN 52354:2020-12 Headform impact test with deceleration measurement on glass and plastic safety panes for vehicle glazing
- DIN 52348:1985-02 Testing of glass and plastics; abraison test; sand trickling method
- DIN 61854-1:1987-04 Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; technical delivery conditions
- DIN ISO 15082:2018 Road vehicles - Tests for rigid plastic safety glazing materials (ISO 15082:2016)
CZ-CSN, plastic glass
Shanxi Provincial Standard of the People's Republic of China, plastic glass
Taiwan Provincial Standard of the People's Republic of China, plastic glass
- CNS 3362-1985 Glass Tumblers for General Use
- CNS 7300-1986 Glass Beakers for Chemical Analysis
- CNS 11660-1986 Glassfiber Reinforced Plastic Seats
- CNS 7612-1993 Glass-fiber-reinforced Plastic Bathtubs
- CNS 11652-1986 Glassfiber Reinforced Plastic Lamp Pole
- CNS 4089-1993 Glass-fiber-reinforced Plastic Corrugated Sheets
- CNS 11654-1986 Glassfiber Reinforced Plastic Water Tank
- CNS 13506-1995 Glass - Fibor - Reinferced Plastic Pipe Fittings
- CNS 11658-1993 Construction Parts of Glassfiber Reinforced Plastic Septic Tank
- CNS 14494-2000 Glassfiber reinforced plastic pressure pipe for conveying water works
- CNS 11650-1986 Glassfiber Reinforced Plastic Electric Enclosure
- CNS 11608-1986 Unplasticized Polyvinyl Chloride Pipes with Fiberglass Reinforced Plastic Reinforcement
- CNS 8913-1982 Glassfiber Reinforced Plastic Bathtubs Connected with Floor
- CNS 12776-1990 General Rules for Methods of Test for Glass Fiber Reinforced Plastics
- CNS 13025-1992 Glass-Fiber-Reinforced Plastic Underground Petroleum Storage Tank
- CNS 11653-1986 Method of Test for Glassfiber Reinforced Plastic Lamp Pole
- CNS 7613-1993 Methods of Test for Glass-fiber-reinforcded Plastic Bathtubs
- CNS 11661-1986 Method of Test for Glassfiber Reinforced Plastic Seats
- CNS 11655-1986 Method of Test for Glassfiber Reinforced Plastic Water Tank
- CNS 13507-1995 Methods of Test for Glass - Fibor - Reinferced Plastic Pipe Fittings
- CNS 11609-1986 Method of Test for Unplasticized Polyvinyl Chloride Pipes with Fiberglass Reinforced Plastic Reinforcement
- CNS 11646-2004 Glassfiber reinforced plastic pipe for sewer and industrial use
- CNS 11656-1986 Glassfiber Reinforced Plastic Chemical-Resistant Tank
- CNS 14582-2001 Glassfiber reinforced plastic gravity-flow pipe for sewer use
- CNS 13454-1994 Glassfiber Reinforced Plastic Underground petroleum Pipes and Fittings
- CNS 11651-1986 Method of Test for Glassfiber Reinforced Plastic Electric Enclosure
- CNS 11659-1993 Method of Test for Construction Parts of Glassfiber Reinforced Plastic Septic Tank
- CNS 11648-1998 Glass-fiber reinforced plastic pipe for water work
- CNS 12778-1990 Method of Test for Void Content of Glass Fiber Reinforced P lastics
- CNS 12779-1990 Method of Test for Tensile Properties of Glass Fiber Reinforced Plastics
- CNS 13023-1996 Glass-Fiber-Reinforced Plastic Panel Water Tank
- CNS 13026-1992 Method of Test for Glass-Fiber-Reinforced Plastic Underground Petroleum Storage Tank
- CNS 8914-1982 Method of Test for Glassfiber Reinforced Plastic Bathtubs Connected with Floor
- CNS 12777-1990 Method of Test for Fiber Content of Glass Fiber Reinforced Plastics
- CNS 12781-1990 Method of Test for Compressive Properties of Glass Fiber Reinforced Plastics
- CNS 12780-1990 Method of Test for Flexural Properties of Glass Fiber Reinforced Plastics
HU-MSZT, plastic glass
PK-PSQCA, plastic glass
ES-AENOR, plastic glass
US-FCR, plastic glass
GM North America, plastic glass
PL-PKN, plastic glass
Professional Standard - Agriculture, plastic glass
Professional Standard - Construction Industry, plastic glass
SE-SIS, plastic glass
Military Standards (MIL-STD), plastic glass
Professional Standard - Building Materials, plastic glass
Indonesia Standards, plastic glass
RU-GOST R, plastic glass
- GOST 12738-1977 Glass bulds with graduated neck. Technical specification
- GOST 17478-1995 Moulding materials. Measuring glass-fibre-base laminate and granulated glass-fibre-base laminate. Specifications
- GOST 17478-1972 Moulding material DSV. Specifications
- GOST R 53201-2008 Fiber-glass plastic pipes and fittings. Specifications
- GOST R 55078-2012 Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications
- GOST R 55072-2012 Fiberglass reinforced thermosetting plastic vessels. Specifications
VN-TCVN, plastic glass
PH-BPS, plastic glass
Association Francaise de Normalisation, plastic glass
- NF B35-301*NF EN ISO 385:2005 Laboratory glassware - Burettes
- NF B35-001*NF EN ISO 3819:2016 Laboratory glassware - Beakers
- NF B35-001:1983 Laboratory glassware. Beakers.
- NF EN ISO 3819:2016 Verrerie de laboratoire - Béchers
- NF T51-055:1980 Plastics. Method of exposure under glass to daylight.
- NF T57-559:1975 Plastics materials reinforced with textile glass . Pre impregnated glass fabrics based on epoxy resins. Binding time.
- NF EN ISO 1172:1999 Plastiques renforcés de verre textile - Préimprégnés, compositions de moulage et stratifiés - Détermination des taux de verre textile et de charge minérale. Méthodes par calcination.
- NF V09-111*NF ISO 16657:2006 Sensory analysis - Apparatus - Olive oil tasting glass
- NF R14-601:2000 Road vehicles - Tests for rigid plastic safety glazing materials.
- NF EN 1119:2009 Systèmes de canalisations en plastiques - Assemblages pour tubes et raccords en plastique thermodurcissable renforcé de verre (PRV) - Méthodes d'essai d'étanchéité et de résistance à l'endommagement des assemblages flexibles non résistants ...
- NF T57-152:1996 Textile glass reinforced plastics. Rovings. Preparation of unidirectional plates by winding.
- NF B35-902:1983 Plastics laboratory ware. Beakers.
- NF T57-510:1990 Textile glass reinforced plastics. Sheet moulding compound (smc). Basis for a specification.
International Organization for Standardization (ISO), plastic glass
- ISO 3819:1985 Laboratory glassware — Beakers
- ISO 3819:2015 Laboratory glassware - Beakers
- ISO/FDIS 1172:1980 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content using calcination methods
- ISO 1172:2023 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content using calcination methods
- ISO 1172:1996 Textile-glass-reinforced plastics, prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods
- ISO 8605:2001 Textile-glass-reinforced plastics - Sheet moulding compound (SMC) - Basis for a specification
- ISO 16657:2006 Sensory analysis - Apparatus - Olive oil tasting glass
- ISO 7510:2017 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents
- ISO 15082:1999 Road vehicles - Tests for rigid plastic safety glazing materials
- ISO 8605:1989 Textile glass reinforced plastics; sheet moulding compound (SMC); basis for a specification
- ISO 3268:1978 Plastics; Glass reinforced materials; Determination of tensile properties
- ISO 7056:1981 Plastics laboratory ware; Beakers
- ISO 1172:1975 Textile glass reinforced plastics; Determination of loss on ignition
- ISO 17771:2003 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC
- ISO 22314:2006 Plastics - Glass-fibre-reinforced products - Determination of fibre length
- ISO 7510:1997 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents using the gravimetric method
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plastic glass
- GB/T 12803-1991 Laboratory glassware--Conical graduates
- GB/T 15724.1-1995 Laboratory glassware--Beaker
- GB/T 15724-2008 Laboratory glassware.Beakers
- GB/T 12803-2015 laboratory glass instrument measuring cup
- GB/T 15724.2-1995 Laboratory glassware--Conical beaker
- GB/T 21492-2008 Glass fiber reinforced plastics jacking pipe
- GB/T 7190.2-1997 Glass fiber reinforced plastic cooling tower--Part 2: Large glass fiber reinforced plastic cooling tower
- GB/T 7190.2-2008 Glass fiber reinforced plastic cooling tower.Part2:Large glass fiber reinforced plastic cooling tower
- GB/T 21238-2016 Glass fiber reinforced plastics mortar pipes
- GB/T 14205-1993 Cultivating boat of glass fiber reinforced plastics
- GB/T 21238-2007 Glass fiber reinforced plastics mortar pipes
- GB/T 7190.1-1997 Glass fiber reinforced plastic cooling tower--Part 1: Middle-small type glass fiber reinforced plastic cooling tower
- GB/T 7190.1-2008 Glass fiber reinforced plastic cooling tower.Part 1:Middle and small glass fiber reinforced plastic cooling tower
- GB/T 8237-1987 Liquid unsaturated polyester resin for glass fiber reinforced plastics
- GB/T 2574-1989 Test method for resistance of glass fiber reinforced plastics to damp heat
- GB/T 30812-2014 Glass fiber reinforced plastic flue for coal-fired units
- GB/T 2575-1989 Test method for resistance of glass fiber reinforced plastics to water
- GB/T 1448-1983 Test method for compressive properties of glass fiber-reinforced plastics
- GB/T 1449-1983 Test method for flexural properties of glass fiber-reinforced plastics
- GB/T 1447-1983 Test method for tensile properties of glass fiber-reinforced plastics
- GB/T 2573-1989 Test method for atmosphere exposure of glass fiber reinforced plastics
- GB/T 2577-1989 Test method for resin content of glass fiber reinforced plastics
- GB/T 2573-2008 Test method for aging properties of glass fiber reinforced plastics
- GB/T 2577-2005 Test method for resin content of glass fiber reinforced plastics
British Standards Institution (BSI), plastic glass
- BS ISO 3819:1985 Laboratory glassware. Beakers
- BS EN ISO 3819:2015 Laboratory glassware. Beakers
- BS 6523:1984 Specification for glass beakers for laboratory use
- BS EN 2747:1998 Glass fibre reinforced plastics - Tensile test
- BS ISO 8605:2001 Textile-glass-reinforced plastics - Sheet moulding compound (SMC) - Basis for specification
- BS 2782-10 Method 1002:1977 Methods of testing plastics. Glass reinforced plastics. Determination of loss on ignition
- BS EN ISO 1172:2023 Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile-glass and mineral-filler content using calcination methods
- BS 2782-10 Method 1003:1977 Methods of testing plastics. Glass reinforced plastics. Determination of tensile properties
- BS 3463:1975 Specification for observation and gauge glasses for pressure vessels
- BS ISO 16657:2006 Sensory analysis - Apparatus - Olive oil tasting glass
- 22/30448262 DC BS EN ISO 1172. Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile glass and mineral-filler content. Calcination methods
- BS ISO 7510:2017 Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
- BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
- BS AU 182:1982 Specification for plastics safety glazing materials for use in road vehicles
- BS EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
- BS ISO 22314:2006 Plastics - Glass-fibre-reinforced products - Determination of fibre length
- BS EN 977:1998 Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids
- BS 2782-10 Method 1004:1977 Methods of testing plastics. Glass reinforced plastics. Standard atmospheres for conditioning and testing
- BS EN ISO 11357-2:2014 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
- BS ISO 11357-2:2013 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
KR-KS, plastic glass
- KS L ISO 3819-2022 Laboratory glassware — Beakers
- KS M ISO 8605-2016 Textile-glass-reinforced plastics－Sheet moulding compound(SMC)－Basis for a specification
- KS M ISO 1172-2022 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
- KS M ISO 7510-2019 Plastics piping systems — Glass-reinforced plastics(GRP) components — Determination of the amounts of constituents
- KS R ISO 15082-2018 Road vehicles — Tests for rigid plastic safety glazing materials
- KS R ISO 15082-2018(2023) Road vehicles — Tests for rigid plastic safety glazing materials
Standard Association of Australia （SAA）, plastic glass
ES-UNE, plastic glass
ZA-SANS, plastic glass
- SANS 17:2005 Glass and plastics in furniture
- SANS 1472:2005 Plastics safety glazing materials for motor vehicles
- SANS 1538:2001 Plain-woven glass rovings for glass-reinforced plastics laminates
- SANS 1538:2008 Plain-woven glass rovings for glass-reinforced plastics laminates
RO-ASRO, plastic glass
- STAS 2639-1984 MEA SUR IX G GLASS JARS AND GIPS General tcchnical requirements for quality
- STAS SR 3448-1993 Laboratory glassware. Cylindrical beakers. Dimensions
- STAS 11268-1979 GLASS FIBRE REINFORCED PLASTICS Determination of tensile strength
IT-UNI, plastic glass
United States Navy, plastic glass
- NAVY MIL-P-82650 NOTICE 1-1992 PLASTIC MOLDING MATERIAL, GLASS PHENOLIC
- NAVY MIL-P-82650 (1)-1978 PLASTIC MOLDING MATERIAL, GLASS PHENOLIC
- NAVY MIL-P-82650-1976 PLASTIC MOLDING MATERIAL, GLASS PHENOLIC
- NAVY MIL-STD-2199 CHG NOTICE 1-1993 GLASS REINFORCED PLASTIC COVERINGS FOR PROPELLER SHAFTING (METRIC)
- NAVY MIL-R-19907 D (1)-1992 REPAIR KIT, GLASS REINFORCED PLASTIC LAMINATE
- NAVY MIL-R-19907 D-1990 REPAIR KIT, GLASS REINFORCED PLASTIC LAMINATE
- NAVY MIL-M-46069 ADMIN NOTICE 5-2005 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
- NAVY MIL-M-46069 (2)-1965 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
- NAVY MIL-M-46069-1964 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
- NAVY MIL-HDBK-803-1990 GLASS REINFORCED PLASTICS PREVENTIVE MAINTENANCE AND REPAIR
- NAVY MIL-P-17549 D VALID NOTICE 1-1989 PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE STRUCTURAL
- NAVY MIL-P-17549 D-1981 PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE STRUCTURAL
International Federation of Trucks and Engines, plastic glass
(U.S.) Ford Automotive Standards, plastic glass
- FORD ESB-M11P27-A-1985 ADHESION REQUIREMENTS, ADHESIVE FOR BONDING FRP/FRP AND FRP/METAL
- FORD SK-M4D9837-B-1994 PPO MOLDING COMPOUND, 20 % GLASS FIBER REINFORCEMENT
- FORD WSB-M18P16-A-1995 SEALING REQUIREMENTS, ANTI-FLUTTER, FOR ISOLATION OF FRP/FRP PANELS
- FORD WSK-M4D837-A-2006 POLYBUTYLENE TEREPHTHALATE (PBT), 20% GLASS SPHERE FILLED MOLDING COMPOUND
- FORD WSB-M11P27-B-2000 ADHESION REQUIREMENT, ADHESIVE FOR BONDING FRP/FRP AND FRP/PAINTED METAL PARTS ASSEMBLED AFTER VEHICLE ELECTROCOAT
- FORD ESB-M4D436-A3-1987 POLYETHERIMIDE (PEI), 30% GLASS FIBER REINFORCED, INJECTION MOLDING COMPOUND
- FORD ESB-M18P6-A-2007 FRP FILLER, PRODUCTION REPAIR - PERFORMANCE
- FORD ESB-M4G202-A-1978 FILLER, POLYESTER - TWO COMPONENT, FOR FRP SEAMS
- FORD ESB-M99J331-A-2000 MOLDED COATING FOR COMPRESSION MOLDED FRP - ONE COMPONENT
- FORD M98G36-A-1990 GLASS SEPARATOR MATERIAL - WINDSHIELD BENDING
AENOR, plastic glass
- UNE 53316:2012 Plastics. Determination of chemical resistance of glass reinforced plastics.
- UNE 43603:1979 GLASS, NOMENCLATURE AND TERMINOLOGY. CRYSTAL. CRYSTAL GLASS
- UNE-EN 2747:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. TENSILE TEST.
- UNE-EN 14447:2006 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
- UNE 53956:2002 IN Plastics. Buried installation of prefabricated swimming pools made from fiber glass reinforced plastics (GRP).
JSAE - Society of Automotive Engineers of Japan@ Inc., plastic glass
American Society for Testing and Materials (ASTM), plastic glass
- ASTM E1094-98(2003) Standard Specification for Pharmaceutical Glass Graduates
- ASTM E1094-98 Standard Specification for Pharmaceutical Glass Graduates
- ASTM E1094-04 Standard Specification for Pharmaceutical Glass Graduates
- ASTM E960-93(2003) Standard Specification for Laboratory Glass Beakers
- ASTM E960-93(1997) Standard Specification for Laboratory Glass Beakers
- ASTM E1094-04(2009) Standard Specification for Pharmaceutical Glass Graduates
- ASTM E960-93(2008) Standard Specification for Laboratory Glass Beakers
- ASTM E960-93(2021) Standard Specification for Laboratory Glass Beakers
- ASTM E960-93(2013) Standard Specification for Laboratory Glass Beakers
- ASTM E1094-04(2015) Standard Specification for Pharmaceutical Glass Graduates
- ASTM C927-80(1999) Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
- ASTM C927-80(2009) Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
- ASTM C927-80(2014) Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
- ASTM C927-80(2019)e1 Standard test method for lead and cadmium precipitation from the rim and rim of wine glasses decorated with ceramic glaze on the outside
- ASTM C927-80(2004) Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
- ASTM D3841-21 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
- ASTM D3841-97(2008)e1 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
- ASTM D3841-16 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
- ASTM E708-79(2006) Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
IN-BIS, plastic glass
GM Europe, plastic glass
- GME QK 000740-2002 Phenoplast with Glass Fibres and Glass Balls (English/German)
- GME QK 000739-2003 Phenolic Plast with Glass Fibres (English/German)
- GME QK 000744-1985 Phenoplast mit mineralischen F黮lstoffen und Glasfasern Phenoplast with Mineral Fillers and Glass Fibres German
- GME STD 518265-1987 Plastic 8265 (PC with 20% GF) Plast 8265 (PC med 20% GF) English/Swedish
- GME QK 000746-1996 Phenoplast mit mineralischen F黮lstoffen und Glasfasern Phenolic Plast with Mineralic Fillers and Glass Fibres English/German
- GME QK 000749-1990 Phenoplast mit Glasfasern und Mineralien Phenoplast with Glass Fibres and Minerals English/German
U.S. Military Regulations and Norms, plastic glass
- ARMY A-A-50175-1988 CUP, COMMUNION, PLASTIC
- ARMY MIL-P-43043 C NOTICE 3-2000 PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED
- ARMY MIL-P-43043 C REINST NOTICE 2-2000 PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED
- ARMY MIL-P-43043 C-1978 PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED
- ARMY MIL-P-43043 C VALID NOTICE 4-2013 Plastic Molding Material, Pre-Mix, Polyester, Glass Fiber Reinforced
- ARMY MIL-DTL-25421 C-2009 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
TH-TISI, plastic glass
- TIS 435-2005 Glassfibre relnforced plastics water tanks
- TIS 1728-1998 Dimensions of test tubes made of glass or plastics for radioactivity measurements
国家市场监督管理总局、中国国家标准化管理委员会, plastic glass
- GB/T 21492-2019 Glass fiber reinforced plastics jacking pipes
- GB/T 37881-2019 Plastics－Long glass fiber reinforced polypropylene（PP） compound for automotive
BELST, plastic glass
European Committee for Standardization (CEN), plastic glass
- EN ISO 3819:2015 Laboratory glassware - Beakers (ISO 3819:2015)
- EN 61:1977 Glass reinforced plastics. Determination of tensile properties
- EN ISO 1172:2023 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods (ISO 1172:2023)
- EN 60:1977 Glass Reinforced Plastics: Determination of the Loss on Ignition (Incorporates Amendment A1: 1978; Remains Current)
- EN 60:1977/A1:1978 Glass reinforced plastics. Determination of the loss on ignition
- prEN ISO 1172 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO/DIS 1172:2022)
- EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
FI-SFS, plastic glass
American National Standards Institute （ANSI), plastic glass
Professional Standard - Urban Construction, plastic glass
API - American Petroleum Institute, plastic glass
National Aeronautics and Space Administration (NASA), plastic glass
GB-REG, plastic glass
Military Standard of the People's Republic of China-General Armament Department, plastic glass
- GJB 1084-1991 7424 torpedo launcher glass fiber reinforced plastic (glass fiber reinforced plastic) tube body
- GJB 1086-1991 7424 Glass fiber reinforced plastic (glass fiber reinforced plastic) spherical gas cylinder for torpedo launcher
- GJB 1039-1990 Injection molding epoxy glass cloth reinforced plastic
- GJB 2466-1995 Specification for fiberglass reinforced plastic mine casings
- GJB 392-1987 Glass fiber reinforced plastic pressure vessels for aviation
- GJB 5271-2003 General specifications for glass fiber reinforced plastic (glass fiber reinforced plastic) compartments of tactical missile van transport vehicles
- GJB 3031-1997 Specification for glass fiber reinforced plastic floats for mine clearance equipment
- GJB 24A-1995 Specification for fiberglass reinforced plastics for sonar domes
- GJB 3031A-2021 Specification for glass fiber reinforced plastic floats for mine clearance equipment
Professional Standard - Electricity, plastic glass
- DL/T 802-2002 Cable ducts fabricated from fiberglass reinforced plastics
Professional Standard - Petroleum, plastic glass
PT-IPQ, plastic glass
- NP 2216-1988 Textile glass reinforced plastics Determination of loss in mass by calcination
NO-SN, plastic glass
- NS 9512-1985 Plastics - Glass reinforced materials - Determination of tensile properties
Guangdong Provincial Standard of the People's Republic of China, plastic glass
- DB44/T 1077-2012 Plastic long glass fiber reinforced polypropylene special material
- DB44/T 107-2000 Energy-saving glass fiber reinforced plastic cooling tower
American Water Works Association (AWWA), plastic glass
- AWWA D120-2002 Thermosetting Fiberglass-Reinforced Plastic Tanks
- AWWA D120-2009 Thermosetting Fiberglass-Reinforced Plastic Tanks
- AWWA F101-2002 Contact-Molded, Fiberglass-Reinforced Plastic Wash Water Troughs and Launders
Professional Standard - Machinery, plastic glass
- JB/T 10981-2010 Glass fiber reinforced plastic axial fans
- JB/T 5822-2015 Glass fiber reinforced phenolic moulding compounds for electrical purposes
- JB/T 5822-1991 Phenolic aldehyde fibre glass moulding compounds for electrical insulation
- JB/T 7770-1995 Unsaturated polyester glass fiber reinforced molding compound
- JB/T 6162-2004 Specification for general process of plastic, glass beaded and metallised screens
American Society of Civil Engineers (ASCE), plastic glass
Professional Standard - Aviation, plastic glass
- HB 5452-1990 Short glass fiber reinforced polyamide 1010 plastic
- HB 5393-1987 Long glass fiber reinforced polyamide 1010 plastic
- HB 5393-2004 Specification for glass fiber reinforced polyamide 1010
- HB 5011-1994 Low-pressure formed glass fiber reinforced plastic aerospace parts
Professional Standard - Military and Civilian Products, plastic glass
- WJ 581-1995 Specification for FX-501 Phenolic Fiberglass Molding Compound
- WJ 582-1992 Specification for FX-502 Phenolic Fiberglass Molding Compound
- WJ 583-1992 Specification for FX-503 Phenolic Glass Fiber Molding Compound
- WJ 584-1992 Specification for FX-505 Phenolic Glass Fiber Molding Compound
- WJ 2124-1993 Specification for FX-530 Phenolic Fiberglass Molding Compound
未注明发布机构, plastic glass
- DIN EN 1638:1997 Pipes made of glass fiber reinforced thermoset plastics
- BS EN ISO 1172:1999(2000) Textile - glass - reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile - glass and mineral - filler content — Calcination methods
- GJB 2466A-2018 Specification for fiberglass reinforced plastic mine bodies
- BS EN 637:1995(2000)*BS 2782-12 mtd 1205a:1995 Plastics piping systems — Glass - reinforced plastics components — Determination of the amounts of constituents using the gravimetric method
SAE - SAE International, plastic glass
- SAE AMS3671C-1996 Plastic Molding Compound@ Novolac Epoxy Resin@ Short Glass Fiber Reinforced@ Structural
- SAE AMS3671-1980 Plastic Molding Compound@ Novolac Epoxy Resin@ Short Glass Fiber Reinforced@ Structural
- SAE AMS3671B-1992 Plastic Molding Compound@ Novolac Epoxy Resin@ Short Glass Fiber Reinforced@ Structural
- SAE AMS3601B-1962 Plastic Sheet@ Copper Faced Glass Fabric Reinforced Epoxy Resin
- SAE AMS3598C-1986 Plastic Sheet@ Copper Faced Glass Cloth Reinforced Polytetrafluoroethylene
- SAE AMS3598E-1995 Plastic Sheet@ Copper Faced@ GTN Glass Fabric Reinforced Polytetrafluoroethylene
- SAE AMS3598D-1995 Plastic Sheet@ Copper Faced@ GTN Glass Fabric Reinforced Polytetrafluoroethylene
- SAE J1691-2019 Plastic Motor Vehicle Safety Glazing - Tolerances and Fabrication Details
Society of Automotive Engineers (SAE), plastic glass
- SAE AMS3671A-1987 PLASTIC MOLDING COMPOUND, NOVOLAC EPOXY RESIN, SHORT GLASS FIBER REINFORCED, STRUCTURAL
- SAE AMS3598C-1994 PLASTIC SHEET, COPPER FACED Glass Cloth Reinforced Polytetrafluoroethylene
- SAE J1691-1997 Plastic Motor Vehicle Safety Glazing - Tolerances and Fabrication Details
- SAE AMS3601C-2011 PLASTIC SHEET, COPPER FACED Glass Fabric Reinforced Epoxy Resin
- SAE AMS3601-1956 PLASTIC SHEET, COPPER FACED Glass Fabric Reinforced Epoxy Resin
- SAE AMS3601A-1958 PLASTIC SHEET, COPPER FACED Glass Fabric Reinforced Epoxy Resin
Danish Standards Foundation, plastic glass
- DS/EN ISO 1172:1999 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods
- DS/EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
BE-NBN, plastic glass
AT-ON, plastic glass
- ONORM EN 61-1978 Textile glass reinforced plastics. Determination of tensile properties.
- ONORM S 3086-1996 Drinking glasses for restaurants and large-scale catering - Test specifications
- ONORM B 5160 Teil.1-1979 Glass fibre reinforced plastics pipes (GRP-pipes); Material, structure, production methods
GOSTR, plastic glass
Professional Standard - Aerospace, plastic glass
- QJ 1180A-2005 Specification for glass fiber reinforced plastic honeycomb core
- QJ 2618A-2005 Specification for glass fiber reinforced plastic honeycomb sandwich structure
Hebei Provincial Standard of the People's Republic of China, plastic glass
机械电子工业部, plastic glass
- JB 5822-1991 Phenolic fiberglass molding compound for electrical insulation
国家能源局, plastic glass
- SY/T 0603-2019 Technical Specifications for Glass Fiber Reinforced Plastic Storage Tanks
Lithuanian Standards Office , plastic glass
- LST EN ISO 1172:2000 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
- LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
- LST EN 14447-2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
Anhui Provincial Standard of the People's Republic of China, plastic glass
International Electrotechnical Commission (IEC), plastic glass
- IEC 60583:1977 Dimensions of test tubes made of glass or plastics for radioactivity measurements
Professional Standard - Aquaculture, plastic glass
- SC/T 8117-2010 Female die making of wooden for fiberglass reinforced plastic fishing vessel
Defense Logistics Agency, plastic glass
Aerospace Industries Association/ANSI Aerospace Standards, plastic glass