ZH
RU
ES

material surface angle

material surface angle, Total:500 items.

In the international standard classification, material surface angle involves: Surface treatment and coating, Paint coating processes, Welding, brazing and soldering, Rubber and plastics products, Elements of buildings, Construction materials, Miscellaneous domestic and commercial equipment, Linear and angular measurements, Non-textile floor coverings, Materials for the reinforcement of composites, Analytical chemistry, Insulating materials, Protection against electric shock, Road engineering, Furniture, Protection against fire, Materials for aerospace construction, Cellular materials, Paints and varnishes, Wood, sawlogs and sawn timber, Paper and board, Waxes, bituminous materials and other petroleum products, Conducting materials, Radiation protection, Earthworks. Excavations. Foundation construction. Underground works, Technical drawings, Testing of metals, Products of the chemical industry, Powder metallurgy, Adhesives, Footwear, Magnetic materials, Iron and steel products, Inks. Printing inks, Air quality, Fasteners, Seals, glands, Protection of and in buildings, Freight distribution of goods, Fasteners for aerospace construction, TESTING, Environmental testing, Installations in buildings, Machine tools, Road vehicle systems, Microbiology, Mechanical testing, Sports equipment and facilities, Acoustics and acoustic measurements, Equipment for entertainment, Petroleum products in general, Fluid power systems, Refractories, Packaging materials and accessories, Structures of buildings, Plastics, Products of non-ferrous metals, Aerospace electric equipment and systems, Cutting tools, Textile machinery, Coatings and related processes used in aerospace industry, Rubber, Tobacco, tobacco products and related equipment, Textile fibres, Electricity. Magnetism. Electrical and magnetic measurements, Reinforced plastics.

CZ-CSN, material surface angle

CSN 03 8230-1975 Abrasive blasting of surfaces of materials
CSN 72 2623 Cast.3-1977 Facing bricks - perforated C1D Material specification
CSN 72 2623 Cast.1-1977 Solid facing bricks - C1P Material specification
CSN 72 2623 Cast.2-1977 Split facing bricks — CIPd Material specification
CSN 72 2623 Cast.4-1977 Shaped facing bricks (CK1). Material specification
CSN 73 6180-1976 Materials for curing of fresh concrete surfaces
CSN 73 0822-1986 Fire technical properties of materials. Flame propagation along the surface of building materials
CSN 72 2623 Cast.5-1977 Shaped facing bricks JANA (CK1 - JANA) Material speoification
CSN 49 0211-1987 Suríace roughness of wood products nnd wood based materials
CSN 73 0863-1983 Dotcrmiiuuion of flamo propagation along tho surfaco of buildirig matorias
CSN 66 6620 Z3-1998
CSN 66 6620 Z5-1998
CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities
CSN 49 0630-1986 Surface fire protection of wood structures
CSN 72 1519-1970 Crushed materials of high quality for terrazo and surface dressing

Japanese Industrial Standards Committee (JISC), material surface angle

JIS A 6916:2021 Surface preparation materials for finishing
JIS A 6916:2000 Surface preparation materials for finishing
JIS A 6916:2014 Surface preparation materials for finishing
JIS S 6044:1995 Surface material for porcelain enamel chalkboards
JIS A 6916 AMD 1:2006 Surface preparation materials for finishing (Amendment 1)

IX-SA, material surface angle

AS 509:1972

Lithuanian Standards Office , material surface angle

LST EN 14700-2014 Welding consumables - Welding consumables for hard-facing
LST EN 14700-2005 Welding consumables - Welding consumables for hard-facing
LST EN 10342-2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
LST EN 10282-2002 Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip

British Standards Institution (BSI), material surface angle

BS EN 14700:2014 Welding consumables. Welding consumables for hard-facing
BS EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Solid surface shapes
DD ENV 61111-2002 Matting of insulating material for electrical purposes
BS 8870:2022+A1:2023 Materials for roads. High friction surfacing. Specification
PD ISO/TR 14187:2020 Surface chemical analysis. Characterization of nanostructured materials
BS EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Sheet goods
BS 4S 14:1964 Specification for aircraft material - Carbon case-hardening steel
4S 14-1964 Specification for aircraft material. Carbon case-hardening steel
BS EN ISO 25178-70:2014 Geometrical product specification (GPS). Surface texture: Areal. Material measures
20/30396725 DC BS 8870. Materials for roads. High friction surfacing. Specification
BS 4247-2:1982 Surface materials for use in radioactive areas - Guide to the selection of materials
BS ISO 19712-1:2009 Plastics. Decorative solid surfacing materials. Classification and specifications
BS EN ISO 19712-1:2013 Plastics. Decorative solid surfacing materials. Classification and specifications
BS 3262-3:1989 Hot-applied thermoplastic road marking materials - Specification for application of material to road surfaces
BS EN ISO 25178-73:2019 Geometrical product specifications (GPS). Surface texture: Areal - Terms and definitions for surface defects on material measures
BS EN 828:2013 Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface
BS 5S 15:1964 Specification for aircraft material - 3 per cent nickel case-hardening steel
5S 15-1964 Speciffor aircraft material. 3 per cent nickel case-hardening steel
22/30462336 DC BS 8870:2022+A1. Materials for roads. High friction surfacing. Specification
BS EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
BS EN 828:1998 Adhesives. Wettability. Determination by measurement of contact angle and critical surface tension of solid surface
BS A 306:1994 Rivets, solid, universal head, metallic material, with or without surface treatment. Dimensions
BS EN 10282:2001 Magnetic Materials - Method of Test for the Determination of Surface Insulation Resistance of Electrical Sheet and Strip
BS EN 13892-6:2002 Methods of test for screed materials - Determination of surface hardness
BS ISO 13473-3:2002 Characterization of pavement texture by use of surface profiles - Specification and classification of profilometers
BS EN ISO 19712-3:2022 Tracked Changes. Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
22/30420646 DC BS ISO 4410. Experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
BS EN ISO 19403-2:2020 Paints and varnishes. Wettability - Determination of the surface free energy of solid surfaces by measuring the contact angle
BS EN 13865:2003 Surfaces for sports areas - Determination of angled ball behaviour - Tennis
BS EN 13865:2017 Surfaces for sports areas. Determination of angled ball behaviour. Tennis
BS EN 60404-11:2013 Magnetic materials. Method of test for the determination of surface insulation resistance of magnetic sheet and strip
BS ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding

Korean Agency for Technology and Standards (KATS), material surface angle

KS G 2007-1999(2009) SURFACE MATERIAL FOR PORCELAIN ENAMEL CHALKBOARDS
KS F 4937-2019 Surface finishing material for parking slab
KS L 2524-2006 Textile glass fabrics for surfacing
KS F 2363-2010 Standard practice for quantities of materials for asphalt surface treatments
KS F 2363-1985 Standard practice for quantities of materials for asphalt surface treatments
KS F 2528-2017 Materials for soil－aggregate subbase, base and surface courses
KS B ISO 10250:2003 Metallic materials－Hardness testing－Tables of Knoop hardness values for use in tests made on flat surfaces
KS M ISO 4324:2007 Surface active agents-Powders and granules-Measurement of the angle of repose
KS M ISO 4324:2013 Surface N agents-Powders and granules-Measurement of the angle of repose
KS F 4930-2012 Penetrating water repellency of liquid type for concrete surface application
KS D ISO 4498-2-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness-Part 2：Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
KS A ISO 5261:2014 Technical drawings — Simplified representation of bars and profile sections
KS R 1101-2005(2020) Test procedure of rusting at materialinterfaces for disc brake pads of automobiles
KS F 4716-2001 Cement filling compound for surface preparation
KS F 4716-1992 Cement filling compound for surface preparation
KS F 2363-2010(2022) Standard practice for quantities of materials for asphalt surface treatments
KS F 2363-2010(2017) Standard practice for quantities of materials for asphalt surface treatments
KS M ISO 8504-2-2012(2017) Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 2：Abrasive blast-cleaning
KS M ISO 4324-2007(2012) Surface active agents－Powders and granules－Measurement of the angle of repose

European Committee for Standardization (CEN), material surface angle

EN 14700:2014 Welding consumables - Welding consumables for hard-facing
EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)
EN 10282:2001 Magnetic Materials - Method of Test for the Determination of Surface Insulation Resistance of Electrical Sheet and Strip
EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
EN 1890:2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
EN 1890:1999 Surface Active Agents - Determination of Cloud Point of Non-Ionic Surface Active Agents Obtained by Condensation of Ethylene Oxide
EN 13865:2003 Surfaces for sports areas Determination of angled ball behaviour Tennis
EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
EN 12582:1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
prEN 828-1992 Adhesives; wettability; determination by measurement of contact angle and critical surface tension of solid surface
EN 13892-6:2002 Methods of test for screed materials - Part 6: Determination of surface hardness
EN 13865:2017 Surfaces for sports areas - Determination of angled ball behaviour - Tennis

BE-NBN, material surface angle

NBN 451-1957
NBN B 24-206-1974
NBN B 24-210-1976
NBN S 22-015-1985 Textile glass - Woven fabrics - Determination of mass per unit area
NBN B 24-207-1974
NBN B 24-203-1973
NBN T 63-140-1980 Surface active agents - Powders and granules - Measurement of the angle of repose

Underwriters Laboratories (UL), material surface angle

UL 410-1992 Slip resistance of floor surface materials
UL 410-2006 UL Standard for Safety Slip Resistance of Floor Surface Materials Third Edition
UL 723-1993 Test for surface burning characteristics of building materials
UL 723-1996 Test for surface burning characteristics of building materials
UL 723-2003 Test for surface burning characteristics of building materials
UL 410 BULLETIN-2003 UL Standard for Safety Slip Resistance of Floor Surface Materials
UL 2818-2013 Greenguard - Certification Program For Chemical Emissions For Building Materials, Finishes And Furnishings
UL 410-1996 UL Standard for Safety Slip Resistance of Floor Surface Materials (Second Edition)

BHMA - Builders Hardware Manufacturers Association Inc., material surface angle

A156.18-1993 Materials and Finishes (BHMA 1301)
A156.18-2000 Materials and Finishes
A156.18-2012 MATERIALS AND FINISHES
A156.18-2006 Materials and Finishes
A156.18-2016 MATERIALS AND FINISHES

Guangdong Provincial Standard of the People's Republic of China, material surface angle

DB44/T 1232-2013 Test Method for Determination of Surface Tension of Solid Coatings, Substrates, and Pigments Contact Angle Method
DB44/T 1872-2016 Determination of wettability of textile surfaces by contact angle method

SE-SIS, material surface angle

SIS SMS 2923-1971 Bonded abrasive products. Straight grinding wheels for surface grinding
SIS SEN 04 09 03-1965 Metbods of test for volume and surface resistivities of insulating materials
SIS 18 41 63-1973 Paints. Estimation of resistance to fats on organic finishes
SIS SS IEC 343:1982 Recommended test methods for determining the relative resistance of insulating materials to break-down by surface discharges
SIS SS-ISO 7629:1989 Road vehicles — Brake linings — Disc brake pads — Evaluation of surface and material flaws after testing

International Organization for Standardization (ISO), material surface angle

ISO 19712-3:2007 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
ISO/TR 14187:2020 Surface chemical analysis — Characterization of nanostructured materials
ISO 19712-3:2022 Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes
ISO 19712-2:2007 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
ISO/TR 14187:2011 Surface chemical analysis - Characterization of nanostructured materials
ISO 410:1982 Metallic materials; Hardness test; Tables of Brinell hardness values for use in tests made on flat surfaces
ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures
ISO 4498-2:1981 Sintered metal materials, excluding hardmetals; Determination of apparent hardness; Part 2 : Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
ISO 19712-1:2008 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
ISO 25178-73:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
ISO 4324:1977 Surface active agents; Powders and granules; Measurement of the angle of repose
ISO/PRF 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding

Association Francaise de Normalisation, material surface angle

NF T54-370-3:2013 Plastics - Decorative solid surfacing materials - Part 3: determination of properties - Solid surface shapes
NF P90-131*NF EN 12230:2003 Surfaces for sports areas - Determination of tensile properties of synthetic sports areas
NF T54-370-3*NF EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3 : determination of properties - Solid surface shapes
NF EN ISO 105-X07:1997 Textiles - Essais de solidité des teintures - Partie X07 : solidité des teintures à la surteinture : laine.
NF EN ISO 19712-1:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 1 : classification et spécifications
NF T58-112:1971 Plastics materials. Surface coating of metals. Plastics coatings. Adhesion test.
NF EN 17409:2020 Surfaces pour sols sportifs - Code de bonnes pratiques pour l'échantillonnage des matériaux de remplissage utilisés dans les surfaces de gazon synthétique
NF C28-905*NF EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel, strip and laminations
NF T54-370-2*NF EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2 : determination of properties - Sheet goods
NF A95-321-2:1988 Powder metallurgy. Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2 : case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen.
NF ISO 23812:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Méthode pour l'étalonnage de la profondeur pour le silicium à l'aide de matériaux de référence à couches delta multiples
NF G62-005:1983 FOOTWEAR. FASTENESS TESTING OF DYES OR COATING FOR FOOTWEAR MATERIALS. DETERMINATION OF THE FASTNESS TO TRANSPER BY RUBBING IN THE DRY STATE AND IN THE MOIST STATE.
UTE C26-141U*UTE C26-141:1976 Solid insulating materials. Varnished fabrics. Relevant article sheets.
NF E05-031-70*NF EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture : areal - Part 70 : material measures
NF EN ISO 19712-2:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 2 : détermination des propriétés - Produits en feuilles
NF E05-031-73*NF EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture : Areal - Part 73 : terms and definitions for surface defects on material measures
NF D12-210:2009 Sanitary appliances - Synthetic material toilet wash-basins and surfaces.
NF L09-753:1985 PROTECTION TREATMENT. CODE FOR STANDARD ITEMS PART NUMBER AND UTILIZATION.
NF B40-678-2*NF ISO 12678-2:1997 Refractory products. Measurement of dimensions and external defects of refractory bricks. Part 2 : corner and edge defects and other surface imperfections.
NF EN ISO 25178-70:2014 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 70 : mesures matérialisées
NF EN 1905:1999 Systèmes de canalisations en plastique - Tubes, raccords et matières en poly(chlorure de vinyle) non plastifié (PVC-U) - Méthode d'évaluation de la teneur en PVC sur la base de la teneur totale en chlore.
NF EN 828:2013 Adhésifs - Mouillabilité - Détermination par mesurage de l'angle de contact et de l'énergie superficielle libre de la surface solide
NF T54-370-1*NF EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1 : classification and specifications
NF T76-150*NF EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
NF D11-112:2009 Sanitary appliances - Enamelled material baths.
NF P14-204-6*NF EN 13892-6:2003 Methods of test for screed materials - Part 6 : determination of surface hardness
NF EN 10342:2005 Matériaux magnétiques - Classification des isolations de surface des tôles, bandes et lamelles magnétiques en acier
NF A35-050:1986 Iron and steel - Bars and wire rods for drawing - Surface defects.
NF P90-116:2004 Surfaces for sports areas - Determination of angled ball behaviour - Tennis.
NF T73-008:1978 Surface active agents. Powders and granules.measurement of the angle of repose.

AASHTO - American Association of State Highway and Transportation Officials, material surface angle

MP 28-2016 Standard Specification for Materials for Micro Surfacing
MP 28-2017 Standard Specification for Materials for Micro Surfacing
M 147-1965 Standard Specification for Materials for Aggregate and Soil-Aggregate Subbase@ Base@ and Surface Courses
M147-1965 Standard Specification for Materials for Aggregate and Soil-Aggregate Subbase@ Base and Surface Courses (Eighteenth Edition)

International Federation of Trucks and Engines, material surface angle

NAVISTAR MPAPS A-40-2015 Case Hardening Ferrous Materials
NAVISTAR MPAPS G-7085-2016 Second Surface Decorative Finish - Plastics

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, material surface angle

GB/T 33498-2017 Surface chemical analysis—Characterization of nanostructured materials

US-FCR, material surface angle

FCR FED H-08-1 SEC 09050-2004 INTERIOR/EXTERIOR FINISHES, MATERIALS AND FINISH SCHEDULE
FCR COE ETN 77-3-1976 SURFACED AREAS MATERIAL UTILIZATION CATALOG (SAMUC)
FCR COE ETN 77-3 SUPPLEMENT 1-1977 SURFACED AREAS MATERIAL UTILIZATION CATALOG (SAMUC)
FCR COE ETN 77-3 SUPPLEMENT 2-1979 SURFACED AREAS MATERIAL UTILIZATION CATALOG (SAMUC)
FCR COE REMR-CS-17 REPORT 2-1990 SURFACE TREATMENTS TO MINIMIZE CONCRETE DETERIORATION; LABORATORY EVALUATION OF SURFACE TREATMENT MATERIALS
FCR FED FCGS 07511-1986 AGGREGATE SURFACED BITUMINOUS BUILT-UP ROOFING

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, material surface angle

GB/T 18839.2-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning
GB/T 18839.1-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles
GB/T 42671-2023 Test method for surface roughness of carbon materials
GB/T 18570.3-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 3:Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coa
GB/T 18570.5-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 5:Measurement of chloride on surfaces prepared for painting (ion detection tube method)
GB/T 18839.3-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--Hand-and power-tool cleaning
GB/T 26935-2011 Preparation of steel substrates and paints application for freight containers
GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
GB/T 13288.5-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the detdrmination of the surface profile.
GB/T 18570.2-2001 Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Laboratory determination of chloride on cleaned surfaces
GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface profil
GB/T 4656.1-2000 Technical drawings-Simplified representation of bars and profile sections
GB/T 4656-2008 Technical drawings.Simplified representation of bars and profile sections
GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-c
GB/T 8923.2-2008 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 2:Preparation grades of previously coated steel substrates after localized removal of previous coatings
GB/T 18570.2-2009 Preparation of steel substrates before application of paints and related products.Tests for the assesssment of surface cleanliness.Part 2:Laboratory determination of chloride on cleaned surfaces
GB/T 18570.4-2001 Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Guidance on the estimation of the probability of condensation prior to paint application
GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the calibration of ISO surface profile comparators and for the determination of surface
GB/T 14234-1993 Surface roughness for plastic parts
GB/T 11986-1989 Surface active agents--Powders and granules--Mesurement of the angle of repose

American National Standards Institute （ANSI), material surface angle

ANSI/ICPA SS-1-2001 Performance Standard for Solid Surface Materials
ANSI/TAPPI T558 om-2010 Surface wettability and absorbency of sheeted materials using an automated contact angle tester
ANSI/ASTM E84a:2013 Test Method for Surface Burning Characteristics of Building Materials
ANSI/ASTM E84c:2011 Test Method for Surface Burning Characteristics of Building Materials
ANSI/ASTM E84:2021 Standard Test Method for Surface Burning Characteristics of Building Materials
ANSI/ASTM E84 REV A:2021 Standard Test Method for Surface Burning Characteristics of Building Materials
ANSI/ASTM E162:2013 Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ANSI/ESD STM11.11-2021 The Protection of Electrostatic Discharge Susceptible Items - Surface Resistance Measurement of Planar Materials
ANSI/UL 723-2013 The Standard for Safety for Test of Surface Burning Characteristics of Building Materials

American Society of Civil Engineers (ASCE), material surface angle

ASCE GSP 191-2009 Road Pavement Material Characterization and Rehabilitation
ASCE GSP 182-2008 PAVEMENTS AND MATERIALS CHARACTERIZATION, MODELING, AND SIMULATION

Taiwan Provincial Standard of the People's Republic of China, material surface angle

CNS 12039-1987 Surface Material for Porcelain Enamel Chalkboards
CNS 11677-1986 Method of Test for Hazardous Substances of Furniture Surface
CNS 14911-2005 Methods of test for specular gloss of ceramic tiles and other like surfaces

VDI - Verein Deutscher Ingenieure, material surface angle

VDI 2534 Blatt 2-1972 Oberflaechenschutz mit organischen Werkstoffen; Oberflaechenueberzuege mit Bahnen aus PIB (Polyisobutylen)
VDI 2531-1969 Oberflaechenschutz mit organischen Werkstoffen; Wahl der Beschichtungsstoffe und -Verfahren
VDI 2534 Blatt 1-1966 Oberflaechenschutz mit organischen Werkstoffen; Oberflaechenueberzuege mit Folien aus PVC hart (Polyvinylchlorid hart)

VN-TCVN, material surface angle

TCVN 4737-1989 Textiles materials.Clothing fabrics.List of quality characteristics

Electrostatic Discharge Association (ESDA), material surface angle

ANSI/ESD STM11.11-2006 Surface Resistance Measurement of Static Dissipative Planar Materials

ESD - ESD ASSOCIATION, material surface angle

STM11.11-2001 Surface Resistance Measurement of Static Dissipative Planar Materials
STM11.11-2006 SURFACE RESISTANCE MEASUREMENT OF STATIC DISSIPATIVE PLANAR MATERIALS
STM11.11-2015 SURFACE RESISTANCE MEASUREMENT OF STATIC DISSIPATIVE PLANAR MATERIALS

Professional Standard - Aviation, material surface angle

HB 2-3-1976 Fixed angle (wide face)

HU-MSZT, material surface angle

SG-SPRING SG, material surface angle

SS 485-2011 Specification for Slip resistance classification of pedestrian surface materials
SS 485-2001 SPECIFICATION FOR Slip resistance classification of public pedestrian surface materials

AGMA - American Gear Manufacturers Association, material surface angle

92FTM1-1992 Experimental Characterization of Surface Durability of Materials for Worm Gears

ES-UNE, material surface angle

UNE-EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
IEEE 2715-2023 IEEE Guide for the Characterization of the Shielding Effectiveness of Planar Materials
UNE-EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) (Endorsed by AENOR in January of 2015.)
UNE-EN 14700:2023 Welding consumables - Welding consumables for hard-facing

PT-IPQ, material surface angle

American Society for Testing and Materials (ASTM), material surface angle

ASTM C1126-18 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
ASTM C1126-19 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
ASTM D7113/D7113M-10 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
ASTM D7490-13(2022) Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM E1792-96a Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E1792-20 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D7334-08(2022) Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
ASTM D1331-20 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
ASTM E84-11c Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-12 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D1331-14 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
ASTM D5725-99(2003) Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester
ASTM D5725-99 Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester
ASTM D5725-99(2008) Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester
ASTM D1369-19 Standard Practice for Quantities of Materials for Asphalt-Aggregate Surface Treatments
ASTM F607-96 Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
ASTM E84-18b Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-18a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-12b Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-17a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-03 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-15b Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-18 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-07b Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-03b Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-06 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-06a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-81a Standard Test Method for Surface Burning Characteristics Of Building Materials
ASTM E84-04 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-00a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-21 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-13a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-19a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-07a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-89a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-01 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-05e1 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-05 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-11a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-19b Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-98e1 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-20 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-23a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-23 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-19 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-21a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-22 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-14 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-15 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-17 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-07 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-10b Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-11b Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-12a Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-13 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D7789-12 Standard Practice for Collection of Fungal Material from Surfaces by Swab
ASTM D7707-21 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
ASTM E84-16 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-11 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-12c Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D7707-11(2016) Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
ASTM E84-23b Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E84-23c Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM F386-02(2008) Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
ASTM F386-11 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
ASTM D7490-13 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM D7490-08 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM F1292-04 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment
ASTM F1292-13 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment
ASTM E1792-03(2016) Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E84-10 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM F607-03(2019) Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
ASTM C411-11 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
ASTM D724-99 Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method)
ASTM D724-99(2003) Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method)
ASTM D7334-08 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
ASTM D1006-93 Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
ASTM D1006-01 Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
ASTM D1014-95 Standard Practice for Conducting Exterior Exposure Tests of Paints on Steel
ASTM E1257-93(2003) Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM D7789-12(2021) Standard Practice for Collection of Fungal Material from Surfaces by Swab
ASTM E162-11a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM D7789-21 Standard Practice for Collection of Fungal Material from Surfaces by Swab
ASTM E1494-18 Standard Practice for Testing Physical Properties of Friable Surfacing Materials
ASTM F607-03(2014) Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
ASTM C411-19 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
ASTM D1006/D1006M-13 Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
ASTM C887-13 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
ASTM D1006-01(2006) Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
ASTM B532-85(2007) Standard Specification for Appearance of Electroplated Plastic Surfaces
ASTM B532-85(1997) Standard Specification for Appearance of Electroplated Plastic Surfaces
ASTM B532-85(2002) Standard Specification for Appearance of Electroplated Plastic Surfaces

Standard Association of Australia （SAA）, material surface angle

AS 1580.603.1:2002 Paints and related materials - Methods of test - Finish - General appearance
AS 4586:2013
AS 4049.1:2005 Paints and related materials - Pavement marking materials - Solvent-borne paint - For use with surface applied glass beads
AS/NZS 1580.401.1:1999 Paints and related materials - Methods of test - Surface dry condition
AS 4049.3:2005/Amdt 1:2006
AS 1157.5:1998 Methods of testing materials for resistance to fungal growth - Resistance of timber to surface fungal growth
AS 4049.3:2005 Paints and related materials - Pavement marking materials - Waterborne paint - For use with surface applied glass beads
AS/NZS 4257.10:1997 Plastic roof and wall cladding materials - Methods of test - Determination of surface distortion (oil canning)
AS 4049.3/AMD 1:2006 Amendment No.1 to AS 4049.3-2005 Paints and related--Pavement marking materials Part 3: Waterborne paint--For use with surface applied glass beads
AS 2780:2003(R2013)
AS 1580.603.1:2002(R2013)

RU-GOST R, material surface angle

GOST 7016-1982 Products of wood and wooden materials. Parameters of surface roughness
GOST 6449.3-1982 Products of wood and wooden materials. Tolerances of form and arrangement of surfaces
GOST 5306-1983 Sawn timber and blanks. Tables of volumes
GOST 26028-1983 Dark-coloured raw material for surfactants. Method of determination of an acid value
GOST 28794-1990 Reagents. Method for the determination of specific surface of chromatographic materials by thermal desorption
GOST 13618-1997 Extruded oblique-angled fitting angle-section shapes of aluminium, aluminium and magnesium alloys. Dimensions

Danish Standards Foundation, material surface angle

DS/EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
DS/EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
DS/EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
DS/EN 13865:2004 Surfaces for sports areas - Determination of angle ball behaviour - Tennis
DS/EN 14700:2005 Welding consumables - Welding consumables for hard-facing
DS/EN ISO 13565-3:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material propability curve
DS/EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
DS/EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations

GM Holden Ltd, material surface angle

HOLDEN HN 2268-1998 Surface Preparation of Polyolefin for Adhesion Bonding

IPC - Association Connecting Electronics Industries, material surface angle

IPC TM-650 2.5.17.1A-1994 Volume and Surface Resistivity of Dielectric Materials
IPC TM-650 2.1.5A-1982 Surface Examination@ Unclad and Metal Clad Material
IPC TM-650 2.6.3.2C-2015 Surface Insulation and Moisture Resistance@ Copper Clad Flexible Dielectric Material
IPC TM-650 2.5.17E-1998 Volume Resistivity and Surface Resistance of Printed Wiring Materials
IPC TM-650 2.5.17D-1986 Volume Resistivity and Surface Resistance of Printed Wiring Materials

Professional Standard - Light Industry, material surface angle

QB/T 4448-2013 Determination of peel strength of flexible overlaid materials in furniture surface
QB/T 4449-2013 Determination of peel strength of rigid overlaid materials in furniture surface
QB/T 3655-1999 Determination of peel strength of soft cladding materials on furniture surfaces
QB/T 3656-1999 Determination of peel strength of hard cladding materials on furniture surfaces

IN-BIS, material surface angle

German Institute for Standardization, material surface angle

DIN EN ISO 19712-2:2013-04 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007); German version EN ISO 19712-2:2013
DIN 20372:1988-05 Rock drilling; water tube; connecting dimensions, material, finish
DIN EN ISO 19712-3:2022-07 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022); German version EN ISO 19712-3:2022
DIN EN 12458:1999 Surface active agents - Determination of stability in hard water; German version EN 12458:1999
DIN EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007); German version EN ISO 19712-3:2013
DIN EN 10342:2005-09 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations; German version EN 10342:2005
DIN EN 427:1994 Resilient floor coverings - Determination of the side length, squareness and straightness of tiles; German version EN 427:1994
DIN EN 15330-5:2022-08 Surfaces for sport areas - Synthetic turf and textile sports surfaces - Part 5: Specification for infill materials; German and English version prEN 15330-5:2022 / Note: Date of issue 2022-07-15
DIN 2311-1:1998 Specification and approval of laser beam surface treatment using additional materials - Part 1: Laser surface treatment specification using consumables
DIN EN ISO 25178-70:2014-06 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014); German version EN ISO 25178-70:2014
DIN EN 1890:2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide English version of DIN EN 1890:2006-09
DIN EN 14700:2023 Welding consumables - Welding consumables for hard-facing
DIN EN 14700:2023-02 Welding consumables - Welding consumables for hard-facing; German version EN 14700:2022
DIN EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations; German version EN 10342:2005
DIN EN 13892-6:2003 Methods of test for screed materials - Part 6: Determination of surface hardness; German version EN 13892-6:2002
DIN EN 828:2013-04 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface; German version EN 828:2013
DIN EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
DIN EN ISO 25178-73:2019-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019); German version EN ISO 25178-73:2019
DIN 876-2:1984-08 Surface plates; cast iron surface plates, requirements and testing / Note: To be replaced by DIN 876-2 (2009-11).
DIN EN ISO 308:1998 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997
DIN 53438-3:1984-06 Testing of combustible materials; response to ignition by a small flame; surface ignition
DIN 17022-3:1989-04 Heat treatment of ferrous materials; heat treatment methods; case hardening
DIN ISO 4324:1983 Surface active agents; powders and granules; measurement of the angle of repose
DIN ISO 4324:1983-12 Surface active agents; powders and granules; measurement of the angle of repose
DIN EN 13865:2004 Surfaces for sports areas - Determination of angled ball behaviour - Tennis; German version EN 13865:2003
DIN 10050-7:1973 Testing of butter wrappers, determination of water soluble components of the surface of the wrapper contacting butter

CU-NC, material surface angle

NC 54-105-1985 Construction Materials and Products Sand. Determination of Surface Moisture
NC 04-78-1987 Materials Testing. Determination of Superficially Hardened Layer Depth. Testing Methods

Professional Standard - Rare Earth, material surface angle

XB/T 903-2002 Materials of sintered neodymium iron boron permanent magnets----Electroplating coatings

American Gear Manufacturers Association, material surface angle

AGMA 92FTM1-1992 Experimental Characterization of Surface Durability of Materials for Worm Gears

AENOR, material surface angle

UNE 22164:1994 DETERMINATION OF BET SPECIFIC SURFACE FOR SEPIOLITIC MATERIALS.
UNE-EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
UNE 25190:1964 SELECTIVE LIST OF LONG BOLT OF COUNTERSUNK AND SNAP POINT HEAD, SLOTTED, FOR ANY MATERIAL ORDINARY USE, WITH SUPERFICIAL PROTECTION OR WITHOUT (3-5 MM DIAMETERS, 10-16 MM LENGTHS AND 90o ANGLE).
UNE-EN 14700:2014 Welding consumables - Welding consumables for hard-facing
UNE-EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
UNE 25164:1963 SELECTIVE LIST OF THE MEASURES OF HEXAGONAL HEAD SCREWS (RUGGED OR WITH SUPERFICIAL PROTECTION).
UNE 61003:1975 REFRACTORY MATERIALS. SAMPLING OF MATERIALS WITH FORM
UNE-EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
UNE-EN 10342:2007 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
UNE 25189:1964 SELECTIVE LIST OF LONG BOLT OF COUNTER SUNK AND FLATHEAD SLOTTED, FOR ANY MATERIAL ORDINARY USE, WITH SUPERFICIAL PROTECTION OR WITHOUT IT (2-8 MM DIAMETERS, 10-80 MM LENGTHS AND 90o ANGLE).
UNE 55547:1981 SURFACE ACTIVE AGENTS. POWDERS AND GRANULES. MEASUREMENT OF THE ANGLE OF REPOSE

Professional Standard - Public Safety Standards, material surface angle

GA 111-1995 Solid room fire test method for surface materials

Society of Automotive Engineers (SAE), material surface angle

SAE AMS1550B-2012 Cleaner, Water Base, Aircraft interior Hard Surface Materials
SAE AS4194-1995 SHEET AND STRIP SURFACE FINISH NOMENCLATURE
SAE AMS4949-2008 Titanium, Sheet, Laminated, Surface Bonded
SAE AMS4949C-2022 Titanium, Sheet, Laminated, Surface Bonded
SAE AS4194A-2007 Sheet and Strip Surface Finish Nomenclature

IL-SII, material surface angle

S.I.692 Pt.102-1971 TESTING OF CLEANING MATF IALS BASED ON SYNTHETIC SURFACE ACTIVE AGENTS: TEST FOR TYPE OF SURFACE ACTIVE AGENT
S.I.692-1972 TESTING OF CLEANING MATERIALS BASED ON SYNTHETIC SURFACE ACTIVE AGENTS: DETERMINATION OF NON-IONIC SURFACE ACTIVE AGENT
S.I.692 Pt.209-1972 TESTING OF CLEANING M FERIAL BASED ON SYNTHETIC SURFACE ACTIVE AGENTS. ETERMINATION OF PHOSPHATE

AT-ON, material surface angle

ONORM B 3825-2002 Behaviour of equipment materials in fire - Testing of upholstery fabrics
ONORM A 6063-1990 Technical drawings; hatchings; representation ofcutting edges and materials

BR-ABNT, material surface angle

ABNT MB-490-1972

Group Standards of the People's Republic of China, material surface angle

T/CBMCA 032-2022 Technical specification for the application of negative ion surface coating materials
T/SDMES 0001-2022 Preparation method of evaluation sample for workpiece material surface integrity
T/SXMES 14-2022 Evaluation method of surface temperature for metal material fatigue limit test
T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method

ACI - American Concrete Institute, material surface angle

ACI 364.5T-2010 Importance of Modulus of Elasticity in Surface Repair Materials

U.S. Military Regulations and Norms, material surface angle

ARMY UFGS-32 15 00-2008 AGGREGATE SURFACE COURSE
ARMY A-A-52444 VALID NOTICE 1-2004 GASKETS: COMBINATION OF METAL AND NONASBESTOS FACING MATERIAL (METRIC)
ARMY A-A-52444-1993 GASKETS: COMBINATION OF METAL AND NONASBESTOS FACING MATERIAL (METRIC)
ARMY A-A-52408 VALID NOTICE 1-2004 PRESERVATIVE COATING, RUBBER: FOR RUBBER SURFACES
ARMY A-A-52408-1993 PRESERVATIVE COATING, RUBBER: FOR RUBBER SURFACES

国家市场监督管理总局、中国国家标准化管理委员会, material surface angle

GB/T 40139-2021 Measuring method for surface areas of materials—Three dimensional area measurement base on hyperspectral imaging

Professional Standard - Traffic, material surface angle

JT/T 991-2015 Creamy silane impregnating agent for concrete surface protection of bridge

ES-AENOR, material surface angle

UNE 84-065-1988

GM North America, material surface angle

GM GMN7313-2003 Exterior Label, for Non-Metallic and Low Surface Energy Materials
GM GM6171M-1989 Material and Performance Requirements for Type TR (Thread Rolling) Screws Case Hardened

GM Europe, material surface angle

GME STD 3708-2002 Electrolytic nickel alloyed zinc coatings on steel Elektrolytiska nickellegerade zinkbel鋑gningar p?st錶 English/Swedish
GME STD 500007-1988 Summary and material recommendations Steels for case hardening 講ersikt och materialrekommendationer S鋞th鋜dningsst錶 English/Swedish

National Fire Protection Association (NFPA), material surface angle

NFPA 255 ERTA-2006 Standard Method of Test of Surface Burning Characteristics of Building Materials

PL-PKN, material surface angle

PN C89652-1987 Porous materials and powders The BET method for the determination of the specific surface area
PN C04840-1989 Surface active agents Powders and granules Measurement of the angle of repose

Institute of Electrical and Electronics Engineers (IEEE), material surface angle

IEEE P2715/D1, April 2022 IEEE Draft Guide for the Characterization of the Shielding Effectiveness of Planar Materials
IEEE P2715/D3, October 2022 IEEE Draft Guide for the Characterization of the Shielding Effectiveness of Planar Materials
IEEE P2715/D2, April 2022 IEEE Draft Guide for the Characterization of the Shielding Effectiveness of Planar Materials
IEEE P2715 IEEE Approved Draft Guide for the Characterization of the Shielding Effectiveness of Planar Materials
IEEE P2715/D4, November 2022 IEEE Approved Draft Guide for the Characterization of the Shielding Effectiveness of Planar Materials

KR-KS, material surface angle

KS B ISO 10250-2003(2023)

Military Standard of the People's Republic of China-General Armament Department, material surface angle

GJB 9885-2020 Test method for surface wave attenuation rate of radar absorbing materials

Professional Standard - Machinery, material surface angle

JB/T 6819.4-1993 Instrument material terminology - Magnetic material
JB/T 6819.2-1993 Instrument material terminology - Temperature-measurement material
JB/T 6819.5-1993 Instrument material terminology - Elastic material
JB/T 6819.3-1993 Instrument material terminology - Resistance material, conducting material and electric contact material

RO-ASRO, material surface angle

SR ISO 4498-2:1996 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
STAS 125-1987 COMPACT REFRACTOR MATERIALS AND PRODUCTS Determination of apparent density absorption capacity, apparent porosity and total porosity

YU-JUS, material surface angle

JUS C.A4.055-1987 Mechanical testing of meta/s. Determination of apparent hardness ofs/nteres metal materials, excluding hardmeta/s. Case-hardened ferrous materials, surface enriched bycarbon orcarbon and nitrogen

(U.S.) Ford Automotive Standards, material surface angle

FORD FLTM BV 123-01-2000 CORROSIVE AND ADHESIVE EFFECTS OF GASKET MATERIAL ON METAL SURFACES
FORD FLTM BV 123-1-2000 CORROSIVE AND ADHESIVE EFFECTS OF GASKET MATERIAL ON METAL SURFACES
FORD WD200-2001 THREAD ROLLING SCREW - CASE HARDENED HEXAGON FLANGE HEAD
FORD WD202-2000 THREAD ROLLING SCREW - CASE HARDENED HEXAGON FLANGE HEAD

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, material surface angle

JEDEC JESD213-2010 Common Test Method for Detecting Component Surface Finish Materials

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, material surface angle

TR 4661-2009 Aerospace series Hinges@ flight controls materials and surface treatments (Edition 1)
TR 4858-2018 Aerospace series - Pipe couplings materials and surface treatments (Edition P1)

ZA-SANS, material surface angle

SANS 1273:1979 Fasteners for roof and wall coverings in the form of sheeting
SANS 1273:2009 Fasteners for roof and wall coverings in the form of sheeting

Professional Standard - Chemical Industry, material surface angle

HG 20519.22-1992 Insulation Material Table
HG 20519.23-1992 Anti-corrosion material list
HG 20519.25-1992 Comprehensive Material List

未注明发布机构, material surface angle

BS EN 14700:2022 Welding consumables — Welding consumables for hard - facing
DIN EN ISO 19712-3:2022 Plastics – Decorative solid surface materials – Part 3: Test methods – Molded parts

SSPC - The Society for Protective Coatings, material surface angle

PAINT 23-1991 Latex Primer for Steel Surfaces
TU 1-1995 Surface Tolerant Coatings for Steel

CEN - European Committee for Standardization, material surface angle

EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures

CH-SNV, material surface angle

SN ISO 9003:1988 Quality Systems - Model for quality assurance in final inspection and test
VSM 18727.2-1965

Canadian General Standards Board （CGSB), material surface angle

CGSB 30.23M-1988 Non-Slip Surfacing Safety Material, Lightweight, Pressure- Sensitive Adhesive, with Edge-Sealing Compound

Professional Standard - Aerospace, material surface angle

QJ 2306-1992 Test method for surface resistivity of materials under space environmental conditions

(U.S.) Builders Hardware Manufacturers Association, material surface angle

BHMA A156.18-2016 MATERIALS AND FINISHES
BHMA A156.18-2000 Materials and Finishes

SAE - SAE International, material surface angle

SAE AMS4949B-2017 Titanium@ Sheet@ Laminated@ Surface Bonded

Professional Standard - Automobile, material surface angle

QC/T 877-2011 Hexagon flange head tapping screws for plastic

United States Navy, material surface angle

NAVY MIL-P-24377 A NOTICE 2-1998 PACKING MATERIAL, ASBESTOS, BRAIDED, IMPREGNATED WITH PTFE (POLYTETRAFLUOROETHYLENE), SURFACE LUBRICATED
NAVY MIL-P-24377 A VALID NOTICE 1-1988 PACKING MATERIAL, ASBESTOS, BRAIDED, IMPREGNATED WITH PTFE (POLYTETRAFLUOROETHYLENE), SURFACE LUBRICATED
NAVY MIL-P-24377 A-1982 PACKING MATERIAL, ASBESTOS, BRAIDED, IMPREGNATED WITH PTFE (POLYTETRAFLUOROETHYLENE), SURFACE LUBRICATED

NATO - North Atlantic Treaty Organization, material surface angle

AFAP-4-2005 NATO REACTION-TO-FIRE TESTS FOR MATERIALS SURFACE SPREAD OF FLAME (ED 2)
AFAP-4-2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS SURFACE SPREAD OF FLAME (ED 3)
AFAP-4-2004 NATO REACTION-TO-FIRE TESTS FOR MATERIALS SURFACE SPREAD OF FLAME (ED 1)

Professional Standard - Textile, material surface angle

FZ/T 90069-1995 Requirements for the size of the fillet radius represented by the graphics at the junction of the surface of the part

TH-TISI, material surface angle

TIS 1759-1999 Surface active agents.powders and granules.measurement of the angle of repose

Professional Standard - Tobacco, material surface angle

YC/T 424-2011 Determination of surface wettability of paper for cigarette.Contact angle method

International Electrotechnical Commission (IEC), material surface angle

IEC 60404-11:2012 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip

Professional Standard - Commodity Inspection, material surface angle

SN/T 2896-2011 Food contact materials for export. Metal materials. Determination of phenol in coating. High performance liquid chromatography