ZH
RU
ES
Atomic Fluorescence Analysis of Antimony
Atomic Fluorescence Analysis of Antimony, Total:454 items.
In the international standard classification, Atomic Fluorescence Analysis of Antimony involves: Non-ferrous metals, Animal feeding stuffs, Metalliferous minerals, Testing of metals, Soil quality. Pedology, Water quality, Education, Fertilizers, Vocabularies, Analytical chemistry, Products of the chemical industry, Paint ingredients, Non-metalliferous minerals, Geology. Meteorology. Hydrology, Environmental protection, Rubber and plastics products, Equipment for entertainment, Sugar. Sugar products. Starch, Corrosion of metals, Nuclear energy engineering, Coals, Products of non-ferrous metals, Air quality, Ferrous metals, Natural gas, Inorganic chemicals, Woodworking equipment, Standardization. General rules, Electronic components in general, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Products of the textile industry, General methods of tests and analysis for food products, Ceramics, Refractories, Paints and varnishes, Mining and quarrying, Fuels, Test conditions and procedures in general, Wastes, Welding, brazing and soldering, Ferroalloys, Iron and steel products.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Atomic Fluorescence Analysis of Antimony
- GB/T 3253.6-2008 Methods for chemical analysis of antimony and antimony trioxide.Determination of selenium content.Atomic fluorenscence spectrophotometric method
- GB/T 3253.10-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of mercury content.Atomic fluorescence spectrometric method
- GB/T 3253.7-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of bismuth content.Atomic fluorescence spectrometric method
- GB/T 4325.5-2013 Methods for chemical analysis of molybdenum.Part 5:Determination of antimony content.Atomic fluorescence spectrometry
- GB/T 6150.17-2022 Methods for chemical analysis of tungsten concentrates—Part 17：Determination of antimony content—Atomic fluorescence spectrometry
- GB/T 12689.9-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of antimony content-The atomic fluorescence spectrometer and the flame atomic absorption spectrometric method
- GB/T 23364.3-2009 Methods for chemical analysis of high purity indium oxide.Part 3:Determination of antimony content.Atomic fluorescenece spectrometry
- GB/T 23362.3-2009 Methods for chemical analysis of high purity indium hydroxide.Part 3:Determination of antimony content.Atomic fluorescene spectrometry
- GB/T 3884.10-2012 Methods for chemical analysis of copper concentrates.Part 10:Determination of Antimony content.Hydride generation atomic fluorescence spectrometry method
- GB/T 8151.11-2012 Methods for chemical analysis of zinc concentrates.Part 11:Determination of antimony content.Hydride generation-atomic fluorescence spectrometry
- GB/T 4470-1998 Analytical spectroscopic methods-Flame emission,atomic absorption and atomic fluorescence-Vocabulary
- GB/T 3253.11-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of bismuth content.Flame atomic absorption spectrometric method
- GB/T 3253.3-2008 Methods for chemical analysis of antimony and antimony trioxide.Determination of lead content.Flame atomic absorption spectrophotometric method
- GB/T 3253.5-2008 Methods for chemical analysis of antimony and antimony trioxide.Determination of copper content.Flame atomic absorption spectrophotometric method
- GB/T 3253.9-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of cadmium conten.Flame atomic absorption spectrometric method
- GB/T 32462-2015 Determination of the migration of antimony in polyester resin and products.Atomic fluorescence spectrophotometer
- GB/T 32603-2016 Determination of the content of migration of arsenic, antimony, selenium, mercury from toy materials.Atomic fluorescence spectrometry
- GB/T 8151.15-2005 Methods for chemical analysis of zinc concentrates-Determination of mercury content-Atomic fluorescence spectrometry method
- GB/T 8152.11-2006 Methods for chemical analysis of lead concentrates. Determination of mercury content. Atomic fluorescence spectrometer method
- GB/T 8152.5-2006 Methods for chemical analysis of lead concentrates. Determination of arsenic content. Atomic fluorescence spectrometer method
- GB/T 4325.3-2013 Methods for chemical analysis of molybdenum.Part 3:Determination of bismuth content.Atomic fluorescence spectrometry
- GB/T 4325.4-2013 Methods for chemical analysis of molybdenum.Part 4:Determination of tin content.Atomic fluorescence spectrometry
- GB/T 4325.6-2013 Methods for chemical analysis of molybdenum.Part 6:Determination of arsenic content.Atomic fluorescence spectrometry
- GB/T 12689.2-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of arsenic content-The atomic fluorescence spectrometer method
- GB/T 11067.4-2006 Methods for chemical analysis of silver. Determination of antimony content. The inductively coupled plasma atomic emission spectrometric method
- GB/T 11066.4-1989 Gold--Determination of copper, lead, bismuth and antimony contents--Flame atomic absorption spectrometric method
- GB/T 12689.11-1990 Zinc and zinc alloys--Determination of antimony content--Flame atomic absorption spectrometric method
- GB/T 6150.17-2008 Methods for chemical analysis of tungsten concentrates.Determination of antimony content.Hydride reduction atomic absorption spectrometry
- GB/T 4324.4-2012 Methods for chemical analysis of tungsten.Part 4:Determination of antimony content.Hydrogenate atomic absorption spectrometry
- GB/T 1819.6-2004 Methods for chemical analysis of tin concentrates Determination of antimony content-The malachite green spectrometric method and the flame atomic absorption spectrometric method
- GB/T 11066.5-2008 Methods for chemical analysis of gold.Determination of silver, copper, iron, lead , antimony and bismuth contents.Atomic emission spectrometry
- GB/T 8647.7-2006 The methods for chemical analysis of nickel. Determination of arsenic, antimony, bismuth, tin and lead contents. Electrothermal atomic absorption spectrometric method
- GB/T 20127.8-2006 Steel and alloy - Determination of trace element contents - Part 8: Determination of antimony content by hydride generation-atomic fluorescence spectrometric method
- GB/T 14849.10-2016 Methods for chemical analysis of industrial silicon - Part 10: Determination of mercury content by atomic fluorescence spectrometry
- GB/T 23364.1-2009 Methods for chemical analysis of high purity indium oxide.Part 1:Determination of arsenic content.Atomic fluorescence spectrometry
- GB/T 11066.9-2009 Methods for chemical analysis of gold.Determination for arsenic and tin contents.Hydride generation-atomic fluorescence spectrometry
- GB/T 6150.10-2023 Methods of chemical analysis of tungsten concentrates - Part 10: Determination of lead content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
- GB/T 6150.15-2023 Methods for chemical analysis of tungsten concentrates - Part 15: Determination of bismuth content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
- GB/T 23362.1-2009 Methods for chemical analysis of high purity indium hydroxide.Part 1:Determination of arsenic content.Atomic fluorescence spectrometry
- GB/T 6150.13-2022 Methods for chemical analysis of tungsten concentrates—Part 13：Determination of arsenic content—Atomic fluorescence spectrometry and the silver diethyldithiocarbamate（DDTC-Ag）spectrophotometry
- GB/T 20899.12-2016 Methods for chemical analysis of gold ores.Part 12:Determination of arsenic, mercury, cadmium, lead and bismuth contents.Atomic fluorescence spectrometric method
- GB/T 7739.12-2016 Methods for chemical analysis of gold concerntrates.Part 12:Determination of arsenic, mercury, cadmium, lead and bismuth contents.Atomic fluorescence spectrometric method
- GB/T 23273.3-2009 Methods for chemical analysis of cobalt oxatate.Part 3:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry
- GB/T 8151.10-2012 Methods for chemical analysis of zinc concentrates.Part 10:Determination of tin content.Hydride generation-atomic fluorescence spectrometry
- GB/T 16781.2-1997 Natural gas--Determination of mercury--Cold atomic fluorescent spectrophotometry
- GB/T 15337-1994 General rules for atomic absorption spectrometric analysis
- GB/T 15337-2008 General rules for atomic absorption spectrometric analysis
- GB/T 13293.2-1991 Higher purity copper cathode.Determination of bismuth content.Hydride generation-atomic fluorescence spectrometric method
- GB/T 17593.4-2006 Textiles. Determination of heavy metals. Part 4: Arsenic and mercury. Atomic fluorescence spectrophotometry
- GB/T 8151.13-2012 Methods for chemical analysis of zinc concentrates.Part 13:Determination of germanium content.Hydride generation-atomic fluorescence spectrometry and the phenyl fluorone spectrophptometric method
- GB/T 8152.11-2023 Methods for chemical analysis of lead concentrates - Part 11: Determination of mercury content by atomic fluorescence spectrometry and direct method of solid injection
- GB/T 23607-2009 Methods for chemical analysis of copper anode mud.Determination of arsenic,bismuth,iron,nickel,lead,antimony,selenium and tellurium content.Inductively coupled plasma-atomic emission spectrometry
- GB/T 11066.7-2009 Methods for chemical analysis of gold.Determination of silver,copper,iron,lead,antimony,bismuth,palladium,magnesium,tin,nickel,manganese and chromium contents.Spark atomic emission spectrometry
- GB/T 15076.11-2020 Methods for chemical analysis of tantalum and niobium—Part 11:Determination of arsenic,antimony,lead,tin and and bismuth contents in niobium—Direct current arc atomic emission spectrometry
- GB/T 14353.8-1993 Methods for chemical analysis of copper ores lead ores and zinc ores. Determination of bismuth content. Hydride generationatomic fluorescence spectrometric method
- GB/T 8151.20-2012 Methods for chemical analysis of zinc concentrates.Part 20:Determination of copper,lead,iron,arsenic,cadmium antimony,calcium,magnesium contents.Inductively coupled plasma atomic emission spectrometry
- GB/T 8151.7-2012 Methods for chemical analysis of zinc concentrates.Part 7:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry and the potassium bromate titrimetric method
- GB/T 14203-2016 General rules for spark discharge atomic emission spectrometry
- GB/T 8152.17-2023 Methods for chemical analysis of lead concentrates - Part 17: Determination of aluminum, magnesium, iron, copper, zinc, cadmium, arsenic, antimony, bismuth, calcium content by inductively coupled plasma atomic emission spectrometry
- GB/T 4375.10-1984 Methods for chemical analysis of gallium--The atomic absorption spectrophotometric method for the determination of zinc content
- GB/T 4324.16-1984 Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of magnesium content
- GB/T 4324.17-1984 Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of sodium content
- GB/T 4324.18-1984 Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of potassium content
- GB/T 4325.14-1984 Methods for chemical analysis of molybdenum--The atomic absorption spectrophotometric method for the determination of calcium content
- GB/T 4324.14-1984 Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of calcium content
- GB/T 4325.17-1984 Methods for chemical analysis of molybdenum--The atomic absorption spectrophotometric method for the determination of sodium content
- GB/T 4325.18-1984 Methods for chemical analysis of molybdenum--The atomic absorption spectrophotometric method for the determination of potassium content
- GB/T 4325.16-1984 Methods for chemical analysis of molybdenum--The atomic absorption spectrophotometric method for the determination of magnesium content
- GB/T 4375.11-1984 Methods for chemical analysis of gallium--The cold vapor atomic absorption spectrophotometric method for the determination of mercury content
- GB/T 5059.3-1985 Methods for chemical analysis of ferromolybdenum--The atomic absorption spectrophotometric method for the determination of copper content
- GB/T 7739.2-1987 Methods for chemical analysis of gold concentrates--The flame atomic absorption spectrophotometric methods for the determination of silver content
- GB/T 8151.5-1987 Methods for chemical analysis of zinc concentrates--The atomic absorption spectrophotometric method for the determination of lead content
- GB/T 8151.6-1987 Methods for chemical analysis of zinc concentrates--The atomic absorption spectrophotometric method for the determination of copper content
- GB/T 8151.8-1987 Methods for chemical analysis of zinc concentrates--The atomic absorption spectrophotometric method for determination of cadmium content
- GB/T 8152.4-1987 Methods for chemical analysis of lead concentrates--The atomic absorption spectrophotometric method for the determination of copper content
- GB/T 6150.7-1985 Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric method for the determination of calcium content
- GB/T 6150.16-1985 Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric method for the determination of manganese content
- GB/T 6730.36-1986 Methods for chemical analysis of iron ores--The flame atomic absorption spectrophotometric method for the determination of copper content
- GB/T 6150.11-1985 Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric method for the determination of copper content
- GB/T 8647.5-1988 Nickel--Determination of magnesium content--Flame atomic absorption spectrophotometric method
- GB/T 4702.5-1984 Methods for chemical analysis of chromium metal--The atomic absorption spectrophotometric method for the determination of aluminum content
- GB/T 4702.7-1984 Methods for chemical analysis of chromium metal--The atomic absorption spectrophotometric method for the determination of iron content
- GB/T 29559-2013 Surface chemical analysis.Analysis of zinc and/or aluminium based metallic coatings by glow discharge optical emission spectrometry
- GB/T 3884.18-2014 Methods for chemical analysis of copper concentrates.Part 18:Determination of arsenic,antimony,bismuth,lead,zinc,nickel, cadmium, cobalt, magnesium oxide, calcium oxide contents.Inductively coupled plasma atomic emission spectrometry
- GB/T 32602-2016 Determination of migratable antimony, barium, cadmium, chromium and lead in toy materials.Graphite furnace atomic absorption spectrometry
National Health Commission of the People's Republic of China, Atomic Fluorescence Analysis of Antimony
- GBZ/T 302-2018 Determination of antimony in urine by atomic fluorescence spectrometry
- GBZ/T 316.3-2018 Determination of Lead in Blood - Part 3: Atomic Fluorescence Spectrometry
Anhui Provincial Standard of the People's Republic of China, Atomic Fluorescence Analysis of Antimony
- DB34/T 3662-2020 Determination of Antimony in Feed by Atomic Fluorescence Spectrometry
- DB34/T 2127.7-2014 Analytical methods of regional geochemical survey samples Part 7: Determination of arsenic, antimony, bismuth and mercury by atomic fluorescence spectrometry
Professional Standard - Non-ferrous Metal, Atomic Fluorescence Analysis of Antimony
- YS/T 556.7-2009 Methods for chemical analysis of antimony concentrates.Part 7:Determination of mercury content.Atomic fluorescence spectrometry
- YS/T 229.3-2013 Methods for chemical analysis of high pure lead.Part 3:Determination of antimony content.Atomic fluorescence spectrometry
- YS/T 226.2-2009 Methods for chemical analysis of selenium.Part 2:Determination of antimony content-Hydride generation-atomic fluorescence spectrometry
- YS/T 74.2-2010 Methods for chemical analysis of cadmium-
Part 2: Determination of antimony content-
Hydride generation-atomic fluorescence spectrometry
- YS/T 1605.5-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 5: Determination of antimony content— Atomic fluorescence spectrometry
- YS/T 556.6-2009 Methods for chemical analysis of antimony concentrates.Part 6:Determination of selenium content.Hydride generation-atomic fluorescence spectrometric method
- YS/T 281.15-2011 Methods for chemical analysis of cobalt.Part 15:Determination of arsenic,antimony and bismuth content.Hydride generation-atomic fluorescence spectrometry
- YS/T 820.17-2012 Methods for chemical analysis of laterite nickel ores.Part 17:Determination of arsenic,antimony and bismuth contents.Hydride generation-atomic fluorescence spectrometry
- YS/T 536.7-2009 Methods for chemical analysis of bismuth.Determination of arsenic content.Atomic fluorescence spectrometric method
- YS/T 536.11-2009 Methods for chemical analysis of bismuth.Determination of mercury content.Atomic fluorescence spectrometric method
- YS/T 281.12-1994 Cobalt - Determination of arsenic antimony bismuth tin and lead contents - Flame atomic absorption spectrophotometric method
- YS/T 555.4-2009 Methods for chemical analysis of molybdenum concentrate.Determination of tin content.Atomic fluorescence spectrometry
- YS/T 248.3-2007 Methods for chemical analysis of crude lead.Determination of antimony content.Flame atomic absorption spectrometric method
- YS/T 990.15-2014 Methods for chemical analysis of copper matte.Part 15:Determination of antimony content.Atomic absorption spectrometry
- YS/T 872-2013 Methods for chemical analysis gallium.Determination of mercury in industrial gallium.Atomic fluorescence spectrometer method
- YS/T 426.4-2000 Method for chemical analysis of antimony-beryllium pellets.Determination of lead,iron,manganese,magnesium contents.Atomic absorption spectrophotometric method
- YS/T 710.4-2009 Method for chemical analysis of cobalt oxide.Part 4:Determination of arsenic content.Atomic fluorescence spectrometry
- YS/T 229.2-2013 Methods for chemical analysis of high pure lead.Part 2:Determination of arsenic content.Atomic fluorescence spectrometry
- YS/T 555.3-2009 Methods for chemical analysis of molybdenum concentrate.Determination of arsenic conten.Atomic fluorescence spectrometry
- YS/T 372.15-2006 Methods for elementary analysis of precious alloy. Determination of antimony content. The flame atomic absorption spectrometric method
- YS/T 556.3-2009 Methods for chemical analysis of antimony concentrates.Part 3:Determination of lead content.Flame atomic absorption spectrometric method
- YS/T 556.5-2009 Methods for chemical analysis of antimony concentrates.Part 5:Determination of zinc content.Flame atomic absorption spectrometric method
- YS/T 556.10-2011 Methods for chemical analysis of antimony concentrates.Part 10:Determination of copper content.Flame atomic absorption spectrometric method
- YS/T 556.11-2011 Methods for chemical analysis of antimony concentrates.Part 11:Determination of cadmium content.Flame atomic absorption spectrometric method
- YS/T 556.12-2011 Methods for chemical analysis of antimony concentrates.Part 12:Determination of bismuth content.Flame atomic absorption spectrometric method
- YS/T 556.13-2011 Methods for chemical analysis of antimony concentrates.Part 13:Determination of nickel content.Flame atomic absorption spectrometric method
- YS/T 556.14-2011 Methods for chemical analysis of antimony concentrates.Part 14:Determination of silver content.Flame atomic absorption spectrometric method
- YS/T 1605.3-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 3: Determination of bismuth content— Flame atomic absorption spectrometry and atomic fluorescence spectrometry
- YS/T 461.6-2003 The methods for chemical analysis of lead and zinc bulk concentrates-The determination of mercury content-The atomic fluorescence spectrometry method
- YS/T 1050.9-2015 Methods for chemical analysis of lead-antimony concentrates.Part 9:Determination of silver content.Flame atomic absorption spectrometric method
- YS/T 521.4-2009 Methods for chemical analysis of blister copper.Part 4:Determination of lead,bismuth and antimony contents.Flame atomic absorption spectrometry
- YS/T 745.9-2012 Methods for chemical analysis of copper anode slime.Part 9:Determination of antimony content.Flame atomic absorption spectrophotometry method
- YS/T 226.1-2009 Methods for chemical analysis of selenium.Part 1:Determination of bismuth content.Hydride generation-atomic fluorescence spectrometry
- YS/T 74.1-2010 Methods for chemical analysis of cadmium-
Part 1: Determination of arsenic content-
Hydride generation-atomic fluorescence spectrometry
- YS/T 227.1-2010 Methods for chemical analysis of tellurium-Part 1: Determination of bismuth content-Hydride generation-atomic fluorescence spectrometry
- YS/T 227.10-2010 Methods for chemical analysis of tellurium-Part 10: Determination of arsenic content-
Hydride generation-atomic fluorescence spectrometry
- YS/T 74.9-2010 Mehtods for chemical analysis of cadmium-
Part 9:Determination of tin content-
Hydride generation-atomic fluorescence spectrometry
- YS/T 461.6-2013 Methods for chemical analysis of lead and zinc bulk concentrates.Part 6:The determination of mercury content.Atomic fluorescence spectrometry
- YS/T 276.1-2011 Methods for chemical analysis of indium.Part 1:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry
- YS/T 1605.4-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 4: Determination of tin content— Atomic fluorescence spectrometry
- YS/T 239.7-2010 Methods for chemical analysis of antimony trisulfide-
Part 7:Determination of lead content-Flame atomic absorption spectrometric method
- YS/T 281.12-2011 Methods for chemical analysis of cobalt.Part 12:Determination of arsenic,antimony,bismuth,tin and lead content.Electrothermal atomic absorption spectrometry
- YS/T 519.4-2009 Methods for chemical analysis of arsenic.Part 4:Determination of bismuth,antimony and sulfur content.Inductively coupled plasma atomic cmission spectrometry
- YS/T 276.8-2011 Methods for chemical analysis of indium.Part 8:Determination of bismuth content.Method 1:Hydride generation-atomic fluorescence spectrometry.Method 2:Flame atomic absorption spectrometry
- YS/T 959-2014 Methods for chemical analysis of silver.Determination of copper、bismuth、iron、lead、antimony、palladium、selenium and tellurium contents.Spark atomic emission spectrometry
- YS/T 1050.7-2015 Methods for chemical analysis of lead antimony concentrates.Part 7:Determination of bismuth and copper contents.Flame atomic absorption spectrometric method
- YS/T 716.3-2009 Methods for chemical analysis of low grade blister.Part 3:Determination of bismuth,nickel,lead,antimony and zinc contents.Flame atomic absorption spectrometry
- YS/T 746.6-2010 Methods for chemical analysis of lead-free tin-based solders-
Part 6: Determination of antimony content-
Flame atomic absorption spectrometric method
- YS/T 745.8-2010 Methods for chemical analysis of copper anode slime-
Part 8: Determination of arsenic content-
Hydride generation-atomic fluorescence spectrometry method
- YS/T 472.3-2005 Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates-Determination of mercury content-Hydride generation-atomic fluorescence spectrometry
- YS/T 472.5-2005 Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates-Determination of arsenic content-Hydride generation-atomic fluorescence spectrometry
- YS/T 958-2014 Methods for chemical analysis of silver.Determination of copper、bismuth、iron、lead、antimony、palladium、selenium and tellurium contents.Inductively coupled plasma-atomic emission spectrometry
- YS/T 556.16-2011 Methods for chemical analysis of antimony concentrates.Part 16:Determination of lead,zinc,copper,cadmium,nickel content.Inductively coupled plasma atomic emission spectrometry
- YS/T 716.6-2009 Methods for chemical analysis of low grade blister.Part 6:Determination of arsenic,bismuth,nickel,lead,antimony,tin and zinc contents.Inductively coupled plasma-atomic emission spectrometry
- YS/T 521.6-2009 Methods for chemical analysis of blister copper.Part 6:Determination of arsenic,antimony,bismuth,lead,zinc and nickel contents.Inductively coupled plasma-atomic emission spectrometry
- YS/T 1115.14-2016 Methods for chemical analysis of copper ores and tailings.Part 14:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometric and potassium bromate titrimetric method
- YS/T 775.4-2011 Methods for chemical analysis of lead anode slime.Part 4:Determination of antimony content.Flame atomic absorption spectrophotometry and cerium sulfate titrimetric method
- YS/T 990.18-2014 Methods for chemical analysis of copper matte.Part 18:Determination of lead,zinc,nickel,arsenic,bismuth,antimony,calcium,magnesium,cadmium and cobalt content.Inductively coupled plasma atomic emission spectrometry
- YS/T 74.11-2010 Mehtods for chemical analysis of cadmium-
Part 11:Determination of arsenic,antimony,nickel,lead,copper,zinc,iron,
thallium,tin and silver contents-
Inductively coupled plasma atomic emission spectrometry
- YS/T 520.10-2006 Gallium Chemical Analysis Methods Atomic Absorption Spectrophotometry Determination of Zinc Content
- YS/T 520.11-2006 Gallium Chemical Analysis Method Cold Atomic Absorption Spectrophotometric Determination of Mercury
- YS/T 248.8-1985 Crude lead chemical analysis method atomic absorption spectrophotometry determination of gold content
- YS/T 248.9-1985 Crude lead chemical analysis methods atomic absorption spectrophotometry determination of silver content
- YS/T 281.10-1994 Cobalt - Determination of nickel content - Flame atomic absorption spectrophotometric method
- YS/T 281.6-1994 Cobalt - Determination of magnesium content - Flame atomic absorption spectrophotometric method
- YS/T 281.7-1994 Cobalt - Determination of zinc content - Flame atomic absorption spectrophotometric method
- YS/T 281.8-1994 Cobalt - Determination of cadmium content - Flame atomic absorption spectrophotometric method
- YS/T 281.9-1994 Cobalt - Determination of lead content - Flame atomic absorption spectrophotometric method
- YS/T 281.16-2011 Methods for chemical analysis of cobalt.Part 16:Determination of arsenic,cadmium,copper,zinc,lead,bismuth,tin antimony,silicon,manganese,iron,nickel,aluminum,and magnesium content.Direct current arc atomic emission spectrometry
- YS/T 521.3-2009 Methods for chemical analysis of blister copper.Part 3:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometric method.Potassium bromate titration
- YS/T 536.4-2009 Methods for chemical analysis of bismuth.Determination of silver content.Flame atomic absorption spectrophotmetric method and electrothermal atomic absorption spectrometric method
- YS/T 426.5-2000 Method for chemical analysis of antimony-beryllium pellets.Determination of silicon content.ICP-AES method
工业和信息化部, Atomic Fluorescence Analysis of Antimony
- YS/T 1341.7-2019 Methods of chemical analysis of crude zinc Part 7: Determination of antimony content Atomic fluorescence spectrometry
- YS/T 1171.7-2017 Methods for chemical analysis of recycled zinc raw materials Part 7: Determination of arsenic and antimony amounts Atomic fluorescence spectrometry
- YS/T 445.10-2019 Methods of chemical analysis of silver concentrates Part 10: Determination of antimony content Hydride generation-atomic fluorescence spectrometry and flame atomic absorption spectrometry
- YS/T 1171.8-2017 Methods for chemical analysis of recycled zinc raw materials Part 8: Determination of mercury content by atomic fluorescence spectrometry and cold atomic absorption spectrometry
- YS/T 1381-2020 Methods for chemical analysis of rhodium compounds - Determination of arsenic content Atomic fluorescence spectrometry
- YS/T 1341.8-2019 Methods of chemical analysis of crude zinc Part 8: Determination of tin content Atomic fluorescence spectrometry
- YS/T 1341.6-2019 Methods of chemical analysis of crude zinc Part 6: Determination of arsenic content by atomic fluorescence spectrometry
- YS/T 3015.6-2017 Methods for chemical analysis of gold-loaded carbon Part 6: Determination of mercury content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
- YS/T 3015.7-2017 Methods for chemical analysis of gold-loaded carbon Part 7: Determination of arsenic content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
- YS/T 445.13-2019 Methods of chemical analysis of silver concentrates Part 13: Determination of mercury content by atomic fluorescence spectrometry
- YS/T 1512.9-2021 Methods for chemical analysis of copper smelting fume Part 9: Determination of antimony content Flame atomic absorption spectrometry
- YS/T 1288.3-2018 Methods for chemical analysis of high-purity zinc Part 3: Determination of arsenic content Hydride generation-atomic fluorescence spectrometry
- YS/T 426.5-2021 Methods for chemical analysis of antimony-beryllium pellets Part 5: Determination of silicon content by inductively coupled plasma atomic emission spectrometry
- YS/T 445.11-2019 Methods for chemical analysis of silver concentrates Part 11: Determination of bismuth content Hydride generation-atomic fluorescence spectrometry, flame atomic absorption spectrometry and Na2EDTA titration
- YS/T 426.6-2021 Methods for chemical analysis of antimony beryllium pellets Part 6: Determination of beryllium oxide content by inductively coupled plasma atomic emission spectrometry
- YS/T 1582.3-2022 Methods for chemical analysis of crude antimony Part 3: Determination of arsenic, lead, copper, selenium and iron content by inductively coupled plasma atomic emission spectrometry
- YS/T 1462.5-2021 Methods for chemical analysis of crude tin Part 5: Determination of antimony content Flame atomic absorption spectrometry and cerium sulfate titration
- YS/T 1348.6-2020 Methods for chemical analysis of lead smelting silver slag Part 6: Determination of lead, copper, antimony and bismuth content by inductively coupled plasma atomic emission spectrometry
- YS/T 1345.4-2020 Methods for chemical analysis of bismuth-rich lead Part 4: Determination of antimony content Flame atomic absorption spectrometry and cerium sulfate titration
- YS/T 445.15-2019 Methods for chemical analysis of silver concentrates Part 15: Determination of lead, zinc, copper, arsenic, antimony, bismuth and cadmium content by inductively coupled plasma atomic emission spectrometry
- YS/T 1230.3-2018 Methods for chemical analysis of anode copper Part 3: Determination of amounts of tin, iron, arsenic, antimony, bismuth, lead, zinc and nickel by inductively coupled plasma atomic emission spectrometry
- YS/T 1046.7-2015 Methods for chemical analysis of copper slag concentrates Part 7: Determination of amounts of arsenic, antimony, bismuth, lead, zinc and magnesium oxide by inductively coupled plasma atomic emission spectrometry
- YS/T 1345.7-2021 Methods for chemical analysis of bismuth-rich lead - Part 7: Determination of copper, iron, nickel, cadmium, arsenic, antimony and bismuth content by inductively coupled plasma atomic emission spectrometry
- YS/T 536.14-2022 Methods of chemical analysis of bismuth - Part 14: Determination of copper, lead, zinc, iron, silver, arsenic, tellurium and antimony contents by inductively coupled plasma atomic emission spectrometry
- YS/T 1314.5-2019 Methods for chemical analysis of silver slag from copper smelting Part 5: Determination of copper, antimony, bismuth, selenium, tellurium and tin contents by inductively coupled plasma atomic emission spectrometry
- YS/T 1348.4-2020 Methods for chemical analysis of silver slag from lead smelting Part 4: Determination of antimony content by flame atomic absorption spectrometry and cerium sulfate titration
- YS/T 1341.11-2019 Methods for chemical analysis of crude zinc Part 11: Determination of lead, iron, cadmium, copper, tin, aluminum, arsenic, antimony, germanium and indium content by inductively coupled plasma atomic emission spectrometry
- YS/T 1340-2019 Methods for chemical analysis of lead and lead alloys Determination of tin, antimony, arsenic, bismuth, copper, cadmium, calcium and silver contents Wavelength dispersive X-ray fluorescence spectrometry
- YS/T 1050.10-2016 Methods for chemical analysis of lead and antimony concentrates Part 10 Determination of thallium content Inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
- YS/T 445.3-2019 Methods for chemical analysis of silver concentrates Part 3: Determination of arsenic content Hydride generation-atomic fluorescence spectrometry and potassium bromate titration
- YS/T 461.11-2021 Methods for chemical analysis of mixed lead-zinc concentrates - Part 11: Determination of arsenic, bismuth, cadmium, cobalt, copper, nickel and antimony contents by inductively coupled plasma atomic emission spectrometry
- YS/T 746.17-2018 Methods for chemical analysis of lead-free tin-based solders - Part 17: Determination of amounts of silver, copper, lead, bismuth, antimony, iron, arsenic, zinc, aluminum, cadmium, nickel and indium by inductively coupled plasma atomic emission spectromet
Henan Provincial Standard of the People's Republic of China, Atomic Fluorescence Analysis of Antimony
- DB41/T 811-2013 Determination of antimony in soil by atomic fluorescence method
- DB41/T 813-2013 Determination of Available Antimony in Soil by Atomic Fluorescence Method
- DB41/T 812-2013 Determination of Carbonate Antimony in Soil by Atomic Fluorescence Method
Group Standards of the People's Republic of China, Atomic Fluorescence Analysis of Antimony
- T/QAS 059-2021 Determination of Arsenic, Antimony and Bismuth in Brines by Atomic Fluorescence Spectrometry
- T/SDAQI 059-2021 Determination of Selenium and Stibium in Fertilizer by Atomic Fluorescence Spectrometry
- T/HNAEPI 006-2022 Soil and Sediment–Determination of arsenic, mercucy, selenium, bismuth, antimony-Water bath / Atomic Fluorescence Spectrophotometry
- T/CSTM 00760-2021 Nickel—Determination of arsenic, antimony and bismuth contents —Hydride generation- atomic fluorescence spectrometric method
- T/QAS 082.10-2023 Chemical Analysis of Rock Salt and Glauber's Salt - Part 10: Determination of Arsenic by Atomic Fluorescence Spectrometry
- T/QAS 081.4-2023 Chemical analysis of polymetallic minerals - Part 4: Determination of tin by hydride generation - atomic fluorescence spectrometry
- T/NAIA 0133-2022 Determination of Mercury in Industrial Sulfuric Acid - Atomic Fluorescence Spectrophotometry
- T/CSTM 00964-2022 General rules for performance evaluation of atomic spectrometer
Professional Standard - Education, Atomic Fluorescence Analysis of Antimony
- JY/T 0566-2020 General rules for atomic fluorescence spectrometry
- JY/T 0565-2020 General rules for electrothermal atomic absorption spectrometry
Professional Standard - Commodity Inspection, Atomic Fluorescence Analysis of Antimony
- SN/T 3117-2012 Determination of arsenic,antimony and mercury in leather.Atomic fluorescence spectrometry
- SN/T 2092-2008 Determination of selenium content in antimony ingot for import and export.Atomic fluorescence spectrometric method
- SN/T 3249.3-2012 Imitation jewelry & accessory.Part 3:Determination of antimony and mercury content.Atomic fluorescence spectrometric method
- SN/T 3811-2014 Determination of arsenic and antimony in petroleum naphthas.Hydride generation atomic fluorescence spectrometric method
- SN/T 3534-2013 Determination of arsenic and antimony released from enamel and glass container.Atomic fluorescence spectrometry
- SN/T 2888-2011 Determination of antimony in high-density polyethylene, a food contact material for export, by atomic fluorescence spectrometry
- SN/T 3366-2012 Determination of soluble mercury,arsenic,selenium,antimony in indoor decorating and refurbishing coatings.Atomic fluorescence spectrometric method
- SN/T 2297.7-2015 Analysis method for gypsum and gysum products.Part 7:Determination of arsenic and mercury content.Atomic fluorescence spectrum
- SN/T 3941-2014 Food contact materials.Metal materials.Determination of lead, cadmium, arsenic and antimony migration.Hydride generation atomic fluorescence spectrometry method
- SN/T 2004.1-2005 Determination of mercury in electrical and electronic equipment-Part 1:Hydride generation-atomic fluorescence spectrometric method
- SN/T 2004.7-2006 Determination of lead,cadmium in electrical and electronic equipment.Part 7:Atomic fluorescence spectrometry
- SN/T 3323.4-2012 Mill scale.Part 4:Determination of arsenic and mercury.Atomic fluorescence spectrometric method
- SN/T 2083-2008 Method for analysis of brass.Spark discharge atomic emission spectrometric
Professional Standard - Environmental Protection, Atomic Fluorescence Analysis of Antimony
- HJ 694-2014 Water Quality-Determination of Mercury，Arsenic，Selenium，Bismuth and Antimony -Atomic Fluorescence Spectrometry
- HJ 702-2014 Solid Waste— Determination of Mercury, Arsenic, Selenium, Bismuth, Antimony— Microwave Dissolution / Atomic Fluorescence Spectrometry
- HJ 680-2013 Soil and sediment.Determination of mercury, arsenic, selenium, bismuth, antimony.Microwave dissolution/Atomic Fluorescence Spectrometry
- HJ 1133-2020 Determination of arsenic, selenium, bismuth and antimony in ambient air and exhaust gas particulate matter by atomic fluorescence method
- HJ 1046-2019 Determination of Antimony in Water Quality by Flame Atomic Absorption Spectrophotometry
- HJ 1047-2019 Water Quality Determination of Antimony Graphite Furnace Atomic Absorption Spectrophotometry
- HJ 542-2009 Ambient air.Determination of mercury and its compounds.Cold atomic fluorescent spectrophotometry after sulfhydryl cotton preconcentraction
- HJ 542-2009(XG1-2018) Determination of Mercury in Ambient Air Accumulation of Mercapto Cotton - Cold Atomic Fluorescence Spectrophotometry "No. 1 Amendment"
Korean Agency for Technology and Standards (KATS), Atomic Fluorescence Analysis of Antimony
- KS M ISO 6955-2016(2021) Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
- KS M ISO 6955:2016 Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
- KS D 2553-2015 Tantalum－Method for atomic absorption spectrometric analysis
- KS I ISO 20552:2021 Workplace air — Determination of mercury vapour —Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
- KS I ISO 20552:2010 Workplace air－Determination of mercury vapour－Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
- KS D ISO 7523-2012(2017) Nickel－Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents－Electrothermal atomic absorption spectrometric method
- KS D 2568-2008 Tantalum－Method for atomic absorption spectrometric analysis
- KS D 2553-2015(2020) Tantalum－Method for atomic absorption spectrometric analysis
- KS E 3030-2007(2012) Atomic absorption spectrochemical analysis for iron ores
- KS D 2568-2019 Tantalum－Method for atomic absorption spectrometric analysis
- KS E 3030-1982 Atomic absorption spectrochemical analysis for iron ores
- KS D 1659-1993 Methods for atomic absorption spectrophotometric analysis of iron and steel
- KS D 1659-2008(2019) Methods for atomic absorption spectrophotometric analysis of iron and steel
- KS I ISO 20552-2010(2016) Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
- KS D 1659-2008 Methods for atomic absorption spectrophotometric analysis of iron and steel
- KS M 0016-1995 General rules for atomic absorption spectrochemical analysis
- KS M 0016-2010(2020) General rules for atomic absorption spectrochemical analysis
- KS D 2086-2019 Methods for atomic emission spectrometric analysis of titanium
- KS I 20552-2010 Workplace air-Determination of mercury vapour-Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
- KS L ISO 20565-3-2012(2017) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrometry(FAAS) and inductively
- KS L ISO 20565-3-2012(2022) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrometry(FAAS) and inductively
- KS L ISO 10058-3-2012(2022) Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrophotometry(FAAS) and inductively coupled plasma atom
- KS L ISO 20565-3:2012 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)-Part 3:Flame atomic absorption spectrometry(FAAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES)
- KS I ISO 17733:2005 Workplace air－Determination of mercury and inorganic mercury compounds－Method by cold－vapour atomic absorption spectrometry or atomic fluorescence spectrometry
- KS L ISO 10058-3-2012(2017) Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrophotometry(FAAS) and inductively coupled plasma atom
- KS L ISO 26845-2012(2022) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
- KS L ISO 26845-2012(2017) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
- KS D 1679-1993 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
- KS L ISO 21587-3:2012 Chemical analysis of aluminosilicate refractory products-Part 3:Inductively coupled plasma and atomic absorption spectrometry methods
- KS D 1652-2007 Iron and steel-Method for spark discharge atomic emission spectrometric analysis
- KS D 1679-2008 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
- KS D 1652-2022 Iron and steel — Method for spark discharge atomic emission spectrometric analysis
- KS D 1652-2007(2017) Iron and steel－Method for spark discharge atomic emission spectrometric analysis
- KS M ISO 78-4-2010(2020) Layouts for standards－Part 4：Standard for atomic absorption spectrometric analysis
- KS L ISO 26845:2012 Chemical analysis of refractories-General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
- KS L ISO 20565-2-2012(2022) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 2：Wet chemical analysis
KR-KS, Atomic Fluorescence Analysis of Antimony
- KS M ISO 6955-2016 Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
- KS I ISO 20552-2021 Workplace air — Determination of mercury vapour —Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
- KS D 1652-2007(2017)(英文版) Iron and steel－Method for spark discharge atomic emission spectrometric analysis
国家市场监督管理总局、中国国家标准化管理委员会, Atomic Fluorescence Analysis of Antimony
- GB/T 41331-2022 Determination of arsenic , mercury , antimony and selenium in dye products—Atomic fluorescence spectrometry
- GB/T 14352.22-2021 Methods for chemical analysis of tungsten ores and molybdenum ores—Part 22：Determination of antimony content—Hydride generation atomic fluorescence spectrometry
- GB/T 14506.33-2019 Methods for chemical analysis of silicate rocks—Part 33: Determination of arsenic, stibium, bismuth and mercury elements content—Hydride generation atomic fluorescence spectrometry
- GB/T 14352.21-2021 Methods for chemical analysis of tungsten ores and molybdenum ores—Part 21：Determination of arsenic content—Hydride generation atomic fluorescence spectrometry
- GB/T 14353.19-2019 Methods for chemical analysis of copper ores, lead ores and zinc ores—Part 19: Determination of tin content—Hydride generation atomic fluorescence spectrometry
- GB/T 14353.21-2019 Methods for chemical analysis of copper ores, lead ores and zinc ores—Part 21: Determination of arsenic content—Hydride generation atomic fluorescence spectrometry
Association Francaise de Normalisation, Atomic Fluorescence Analysis of Antimony
- T01-040:1982 Analytical spectroscopic methods. Flame emission, atomic absorption and atomic fluorescence. Vocabulary.
- NF ISO 17378-1:2014 Qualité de l'eau - Dosage de l'arsénic et de l'antimoine - Partie 1 : méthode par spectrométrie de fluorescence atomique à génération d'hydrures (HG-AFS)
- NF A08-709:1983 Chemical analysis of copper alloys. Determination of antimony content. Atomic absorption spectrometry method.
- NF A08-410:1979 Chemical analysis of lead. Determination of antimony. (atomic absorption method).
- NF T90-135-1*NF ISO 17378-1:2014 Water quality - Determination of arsenic and antimony - Part 1 : method using hydride generation atomic fluorescence spectrometry (HG-AFS)
- NF A08-450:1979 Chemical analysis of lead alloys. Determination of antimony (atomic absorption method).
- NF A08-563:1974 Chemical analysis of aluminium alloys. Determination of antimony. (atomic absorption method).
- NF T90-139*NF EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
- NF EN ISO 21587-3:2007 Analyse chimique des produits réfractaires d'aluminosilicates (méthode alternative à la méthode par fluorescence de rayons X) - Partie 3 : méthodes par spectrométrie d'absorption atomique (AAS) et spectrométrie d'émission atomique avec plasm...
- NF EN ISO 20565-3:2009 Analyse chimique des produits réfractaires contenant du chrome et des matières premières contenant du chrome (méthode alternative à la méthode par fluorescence de rayons X) - Partie 3 : méthodes par spectrométrie d'absorption atomique dans la ...
- NF EN 14937-2:2006 Cuivre et alliages de cuivre - Dosage de l'antimoine - Partie 2 : méthode par spectrométrie d'absorption atomique dans la flamme (SAAF)
- NF B49-435-3*NF EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3 : flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP
- NF B49-329-3*NF EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3 : flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
- NF A08-760:1992 Chemical analysis of copper. Determination of silver, arsenic, bismuth, cadmium, cobalt, chromium, iron, manganese, nickel, lead, antimony, selenium, silicontin, tellurium and zinc. Method for atomic absorption spectrometric with electrothermal spraying.
- NF X43-205:2005 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry.
- NF B40-670-3*NF EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3 : inductively coupled plasma and atomic absorption spectrometry methods
- NF A08-709-2*NF EN 14937-2:2006 Copper and copper alloys - Determination of antimony content - Part 2 : FAAS method
- NF EN ISO 26845:2008 Analyse chimique des matériaux réfractaires - Exigences générales pour les méthodes d'analyse chimique par voie humide, par spectrométrie d'absorption atomique (AAS) et par spectrométrie d'émission atomique avec plasma induit par haute fréq...
- NF ISO 17378-2:2014 Qualité de l'eau - Dosage de l'arsénic et de l'antimoine - Partie 2 : méthode par spectrométrie d'absorption atomique à génération d'hydrures (HG-AAS)
- NF U44-145:1984 FERTILIZERS AND SOILS CONDITIONERS. DETERMINATION OF MAGNESIUM BY ATOMIC ABSORPTION SPECTROMETRIC METHOD.
CZ-CSN, Atomic Fluorescence Analysis of Antimony
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Atomic Fluorescence Analysis of Antimony
- GJB 5404.9-2005 Analysis methods for trace elements in super alloys Part 9: Determination of antimony content by hydride generation atomic fluorescence spectrometric method
- GJB 5404.2-2005 Analysis methods for trace elements in super alloys. Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometric method
- GJB 5404.12-2005 Analysis methods for trace elements in super alloys Part 12: Determination of tellurium content by hydride generation atomic fluorescence spectrometric method
- GJB 5404.4-2005 Analysis methods for trace elements in super alloys Part 4: Determination of cadium content by methyl isobutyl ketone extraction atomic fluorescence spectrometric method
Military Standard of the People's Republic of China-General Armament Department, Atomic Fluorescence Analysis of Antimony
- GJB 8781.9-2015 Methods for trace element analysis of high-temperature alloys Part 9: Determination of antimony content by hydride generation-atomic fluorescence spectrometry
- GJB 8781.2-2015 Methods for trace element analysis of high-temperature alloys Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometry
- GJB 8781.12-2015 Methods for trace element analysis of high-temperature alloys Part 12: Determination of tellurium content by hydride generation-atomic fluorescence spectrometry
- GJB 8781.4-2015 High temperature alloy trace element analysis method Part 4: Extraction and separation of methyl isobutyl ketone - Determination of cadmium content by atomic fluorescence spectrometry
- GJB 950.7-1990 Analysis method of trace elements of precious metals and their alloys. Determination of trace amounts of lead, antimony and bismuth in palladium alloys by graphite furnace atomic absorption spectrometry.
- GJB 950.7A-2021 Analysis methods of trace elements of precious metals and their alloys Part 7: Determination of trace amounts of lead, antimony and bismuth in palladium alloys by graphite furnace atomic absorption spectrometry
YU-JUS, Atomic Fluorescence Analysis of Antimony
- JUS C.A1.207-1987 Methods for chemical analysis ofantimony and antimony alloys. Determination of copper content of antimonv andantimonv allovs. Flame atomic absorption spectrometric method
- JUS C.A1.210-1989 Hethods for chemical analysis of antimony and antimony alloys. Determination of iron content. Flatoe atomic absorption spectrometric nethod
- JUS C.A1.211-1991 Methods for chemlcal analysis of antimony and antJmony alloys. Determinaticm of lead content. Plane atomlc absorptioo spectrome.tr ic method
- JUS C.A1.208-1988 Methods for chemlcal analysis of antimony and antimony alloys. Determination of nickel content. Flame atomic absorption spectrometric method
- JUS C.A1.209-1989 Methods for chemical analysis of antinony and antimony alloys.Determination nf -r.inc fzfmttmt:. Plamti /ttnmin absnrDtion svectrometric metbod
Professional Standard - Geology, Atomic Fluorescence Analysis of Antimony
- DZ/T 0279.13-2016 Methods of Analysis of Regional Geochemical Samples Part 13: Determination of Arsenic, Antimony, and Bismuth Determination of Hydride Generation—Atomic Fluorescence Spectrometry
- DZ/T 0064.81-2021 Methods of Analytical Groundwater Quality Part 81: Determination of Mercury Amounts by Atomic Fluorescence Spectrometry
- DZ/T 0064.11-2021 Analytical methods for groundwater quality - Part 11: Determination of arsenic content by hydride generation - atomic fluorescence spectrometry
- DZ/T 0064.38-2021 Analytical methods for groundwater quality - Part 38: Determination of the amount of selenium by hydride generation - atomic fluorescence spectrometry
- DZ/T 0279.14-2016 Methods of Analysis of Regional Geochemical Samples Part 14: Selenium Determination of Hydride Generation - Atomic Fluorescence Spectrometry
- DZ/T 0279.17-2016 Methods of Analysis of Regional Geochemical Samples - Part 17: Determination of Mercury Vapor Generation - Cold Atomic Fluorescence Spectroscopy
- DZ/T 0279.15-2016 Methods of Analysis of Regional Geochemical Samples Part 15: Determination of Germanium Quantity and Hydride Generation - Atomic Fluorescence Spectrometry
- DZ/T 0253.2-2014 Analytic methods for biologic samples in eco-geochemistry assessment.Part 2:Determination of selenium content.Fluorescent spectrophotometry
- DZ/T 0253.3-2014 Analytic methods for biologic samples in eco-geochemistry assessment.Part 3: Determination of total mecury content.Cold atomic fluorescent spectrophotometry
Professional Standard - Electron, Atomic Fluorescence Analysis of Antimony
- SJ/T 11024-1996 Methods of analysis for silver brazing for electronic components - Determination of antimony (spectrophotometric-atomic absorption method)
- SJ/T 10896-1996 Atomic absorption analysis of ZnO, PbO, Al2O3 and Sb2O3 in electronic glass
- SJ/T 11014-1996 Methods of analysis for pure silver brazing for electronic components - Determination of antimony (spectrophotometric-malichite green method)
- SJ/T 11013-1996 Methods of analysis for pure silver brazing for electronic components - Determination of cadmium (spectrophotometric-atomic absorption method)
- SJ/T 11023-1996 Methods of analysis for silver brazing for electronic components - Determination of bismuth (spectrophotometric-atomic absorption method)
- SJ/T 11027-1996 Methods of analysis for silver brazing for electronic components - Determination of magnesium (spectrophotometric-atomic absorption method)
- SJ/T 11025-1996 Methods of analysis for silver brazing for electronic components - Determination of lead (spectrophotometric-atomic absorption method)
International Organization for Standardization (ISO), Atomic Fluorescence Analysis of Antimony
- ISO 6955:1982 Analytical spectroscopic methods; Flame emission, atomic absorption, and atomic fluorescence; Vocabulary Bilingual edition
- ISO 9504:1993 Metallurgical-grade fluorspar; determination of antimony content; solvent extraction atomic absorption spectrometric method
- ISO 17378-1:2014 Water quality - Determination of arsenic and antimony - Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
- ISO 20552:2007 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
- ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
- ISO 17733:2004 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
- ISO 17733:2015 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
- ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods
Professional Standard - Agriculture, Atomic Fluorescence Analysis of Antimony
- NY/T 2822-2015 Speciation determination of arsenic and mercury in bee products.Atomic fluorescence spectrometry
- SN/T 5053-2018 Determination of Arsenic, Mercury, Selenium, Tin and Bismuth in Antimony Concentrates by Hydride Atomic Fluorescence Spectrometry
- 水产品质量安全检验手册 1.2.4.4-2005 Chapter 1 General Introduction Section 2 Analytical Methods for Aquatic Product Inspection 4. Physicochemical Analysis (4) Atomic Fluorescence Spectrometry
Professional Standard - Ocean, Atomic Fluorescence Analysis of Antimony
- HY/T 152-2013 Speciation of trivalent arsenic and pentavalent arsenic in sea water by atomic fluorescence spectroscopy
British Standards Institution (BSI), Atomic Fluorescence Analysis of Antimony
- BS ISO 17378-1:2014 Water quality. Determination of arsenic and antimony. Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
- BS EN 13506:2002 Water quality - Determination of mercury by atomic fluorescence spectrometry
- BS EN 13506:2002*BS 6068-2.74:2002 Water quality - Determination of mercury by atomic fluorescence spectrometry
- BS ISO 20552:2007 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
- BS EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
- BS EN ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-A
- BS EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Inductively coupled plasma and atomic absorption spectrometry methods
- BS 7317-3:1990 Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of antimony, arsenic, bismuth, selenium, tellurium and tin by hydride generation and atomic absorption spectrophotometry
- BS 7317-4:1990 Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of antimony, arsenic, bismuth, lead, selenium, tellurium and tin by electrothermal atomization atomic absorption spectrophotometry
- BS EN ISO 26845:2009 Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
- BS EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
ES-AENOR, Atomic Fluorescence Analysis of Antimony
Professional Standard - Nuclear Industry, Atomic Fluorescence Analysis of Antimony
- EJ/T 805-1993 Low Energy Photon Sources for X-ray Fluorescence Analysis
- EJ/T 955-1995 Flow Injection-Hydride-Atomic Absorption Spectrophotometry of Arsenic, Antimony, Bismuth and Selenium in Rocks
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Atomic Fluorescence Analysis of Antimony
- GB/T 1819.17-2017 Methods for chemical analysis of tin concentrates—Part 17：Determination of mercury content—Atomic fluorescence spectrometric method
- GB/T 10574.13-2017 Methods for chemical analysis of tin-lead solders—Part 13：Determination of antimony,bismuth,iron,arsenic,copper,silver,zinc,aluminium,cadmium,phosphorous and gold contents—Inductively coupled plasma atomic emission spectrometric method
German Institute for Standardization, Atomic Fluorescence Analysis of Antimony
- DIN 51009:2013-11 Optical atomic spectral analysis - Principles and definitions
- DIN 51009:2013 Optical atomic spectral analysis - Principles and definitions
- DIN 51009:2001 Optical atomic spectral analysis - Principles and definitions
- DIN EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006); English version of DIN EN ISO 17852:2008-04
- DIN EN ISO 21587-3:2007-12 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007); German version EN ISO 21587-3:2007
- DIN EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
- DIN EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007); English version of DIN EN ISO 21587-3:2007-12
- DIN 51418-1:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
- DIN 38406-32:2000 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 32: Determination of iron by atomic absorption spectrometry (E 32)
- DIN 38405-32:2000 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 32: Determination of antimony by atomic absorption spectrometry (D 32)
- DIN 51418-1:2008-08 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
Taiwan Provincial Standard of the People's Republic of China, Atomic Fluorescence Analysis of Antimony
- CNS 14896-14-2005 Titanium - Method for atomic emission spectrometric analysis
- CNS 12416-2006 General rules for atomic emission spectrometry
- CNS 14896.14-2005 Titanium - Method for atomic emission spectrometric analysis
- CNS 11209-1995 General Rules for Chemical Analysis by Atomic Absorption Spectrophotometry
- CNS 11206-2002 Iron and steel─Methods for atomic absorption spectrometric analysis
- CNS 12126-1987 Method of Chemical Analysis by Atomic Absorption Spectrophotometry for Copper and Copper Alloys
- CNS 12013-1987 Method of Test for Lead in Gasoline by Atomic Absorption Spectrometry
- CNS 9502-1982 Method of Chemical Analysis for Calcium in Metallic Silicon (Atomic Absorptimetric Method)
- CNS 9496-1982 Method of Chemical Analysis for Ferrite in Metallic Silicon (Atomic Absorptimetric Method)
- CNS 9499-1982 Method of Chemical Analysis for Aluminium in Metallic Silicon (Atomic Absorptimetric Method)
Professional Standard - Aviation, Atomic Fluorescence Analysis of Antimony
- HB/Z 5087.7-2004 Methods for analysis of acid plating copper solutions part 7:Determination of antimony content by atomic absorption spectrmetric method
- HB/Z 5099.8-2000 Analytical method of silver electroplating solution Determination of antimony content in hard silver plating solution by atomic absorption spectrometry
- HB 5219.11-1998 Chemical Analysis Methods of Magnesium Alloys - Determination of Nickel Content by Atomic Absorption Spectrometry
- HB 5219.13-1998 Magnesium Alloy Chemical Analysis Methods Atomic Absorption Spectroscopic Analysis Determination of Zinc Content
- HB 5219.20-1998 Methods of chemical analysis of magnesium alloys - Determination of silver content by atomic absorption spectrometry
- HB 5219.3-1998 Methods of chemical analysis of magnesium alloys - Determination of copper content by atomic absorption spectrometry
- HB 5219.8-1998 Methods of chemical analysis of magnesium alloys - Determination of manganese content by atomic absorption spectrometry
- HB 5219.5-1998 Methods of chemical analysis of magnesium alloys - Determination of iron content by atomic absorption spectrometry
RU-GOST R, Atomic Fluorescence Analysis of Antimony
- GOST 17261-2008 Zinc. Methods of atomic-emission spectral analysis
- GOST R ISO 20552-2011 Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
- GOST 27981.1-1988 Copper of high purity. Methods of atomic-spectral analysis
- GOST 27981.1-2015 High purity copper. Method of atomic-spectral analysis
- GOST R 54153-2010 Steel. Method of atomic emission spectral analysis
- GOST 6012-2011 Nickel. Methods of chemical-atomic-emission spectral analysis
- GOST 8776-2010 Cobalt. Methods of chemical-atomic-emission spectral analysis
- GOST 6012-1978 Nickel. Methods of chemical-atomic-emission spectral analysis
- GOST 9519.3-1977 Lead-calcium bearing alloys. Method of atomic-absorbing spectral analysis
- GOST R 50279.4-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" antimony content. Flame atomic absorption spectrometric method and rhodamine B spectrophotometric method
VN-TCVN, Atomic Fluorescence Analysis of Antimony
- TCVN 7724-2007 Water quality.Determination of merdury.Method using atomic fluorescence spectrometry
American Society for Testing and Materials (ASTM), Atomic Fluorescence Analysis of Antimony
- ASTM D6350-98 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
- ASTM D6350-98(2003) Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
- ASTM D6350-14 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
- ASTM D3717-85a(2005) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
- ASTM D3717-85a(2010) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
- ASTM E1097-07 Standard Guide for Direct Current Plasma-Atomic Emission Spectrometry Analysis
Japanese Industrial Standards Committee (JISC), Atomic Fluorescence Analysis of Antimony
- JIS G 1257-17-2:2013 Iron and steel.Atomic absorption spectrometric method.Part 17: Determination of antimony .Section 2: Electrothermal atomization
- JIS H 1630:1995 Method for atomic emission spectrometric analysis of titanium
- JIS H 1683:2002 Tantalum -- Method for atomic absorption spectrometric analysis
- JIS H 1630:1975 Method for atomic emission spectrometric analysis of titanium
- JIS H 1113:1994 Method for atomic emission spectrophotoelectric analysis of zinc metal
- JIS H 1113:2014 Method for photoelectric emission spectrochemical analysis of zinc metal
- JIS G 1257:1994 Iron and steel -- Methods for atomic absorption spectrometric analysis
- JIS H 1560:1994 Method for atomic emission spectrophotoelectric analysis of die casting zinc alloy
- JIS H 1183:1993 Method for atomic emission spectrophotographic analysis of silver bullion
- JIS G 1257-17-1:2013 Iron and steel -- Atomic absorption spectrometric method -- Part 17: Determination of antimony -- Section 1: Flame atomization after extraction of iodide
- JIS H 1306:1992 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
- JIS G 1257 AMD 2:2000 Iron and steel -- Methods for atomic absorption spectrometric analysis (Amendment 2)
- JIS G 1253:2002 Iron and steel -- Method for spark discharge atomic emission spectrometric analysis
- JIS G 1253:1995 Iron and steel -- Method for spark discharge atomic emission spectrometric analysis
- JIS H 1291:1977 Method for atomic absorption spectrochemical analysis of copper and copper alloys
- JIS H 1306:1999 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
- JIS G 1257 AMD 1:1999 Iron and steel -- Methods for atomic absorption spectrometric analysis (Amendment 1)
- JIS K 0121:1993 General rules for atomic absorption spectrochemical analysis
Association of German Mechanical Engineers, Atomic Fluorescence Analysis of Antimony
- VDI 2268 Blatt 4-1990 Chemical analysis of particulate matter; determination of arsenic, antimony and selenium in dust emissions by graphite-furnace atomic absorption spectrometry
- VDI 2268 Blatt 2-1990 Chemical analysis of particulate matter; determination of arsenic, antimony and selenium in dust emissions by atomic absorption spectrometry after separation of their volatile hydrides
Standard Association of Australia （SAA）, Atomic Fluorescence Analysis of Antimony
- AS 1671.1:1987 Lead and lead alloys - Determination of antimony content - Flame atomic absorption spectrometric method
- AS 2292.2:1987 Methods for the analysis of solders - Determination of silver, bismuth, cadmium, copper, antimony, iron and zinc - Flame atomic absorption spectrometric method
- AS 3641.1:1999 Recommended practice for atomic emission spectrometric analysis - Principles and techniques
- AS 2134.3:1994 Recommended practice for chemical analysis by atomic absorption spectrometry - Vapour generation atomic absorption spectrometry
Danish Standards Foundation, Atomic Fluorescence Analysis of Antimony
- DS/EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
- DS/EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
- DS/EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods
- DS/ISO/TS 17379-1:2013 Water quality - Determination of selenium - Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
Lithuanian Standards Office , Atomic Fluorescence Analysis of Antimony
- LST EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
- LST EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 10058-3:20
- LST EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007)
European Committee for Standardization (CEN), Atomic Fluorescence Analysis of Antimony
- EN 14937-2:2006 Copper and copper alloys - Determination of antimony content - Part 2: FAAS method
- EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006)
- EN ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
- EN 12938:1999 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
- EN ISO 10058-3:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 10058-3:20
Indonesia Standards, Atomic Fluorescence Analysis of Antimony
- SNI 13-4694-1998 Composition analysis of coal ash by atomic absorption spectrometry
- SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
Professional Standard - Chemical Industry, Atomic Fluorescence Analysis of Antimony
- HG/T 4550.4-2013 Determination of cadmium in waste chemicals.Part 4:Atomic fluorescence spectrometric method
- HG/T 2954~2955-2008 Standard writing format for atomic absorption spectroscopic analysis method Standard writing format for molecular absorption spectroscopic analysis method
- HG/T 2954-2008 Layouts for standard of atomic absorption spectrometric analysis
IN-BIS, Atomic Fluorescence Analysis of Antimony
AT-ON, Atomic Fluorescence Analysis of Antimony
- ONORM M 6603-1-1997 Water analysis - Determination of potassium and sodium by atomic absorption spectrometry
Yunnan Provincial Standard of the People's Republic of China, Atomic Fluorescence Analysis of Antimony
- DB53/T 639.7-2014 Methods for chemical analysis of direct reduced iron - Part 7: Determination of multiple elements by X-ray fluorescence spectrometry
BE-NBN, Atomic Fluorescence Analysis of Antimony
- NBN T 01-104-1984 Layouts. for standards - Standard for atomic absorption-spectrometric analysis.
AENOR, Atomic Fluorescence Analysis of Antimony
- UNE-EN ISO 21587-3:2008 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007)