ZH
RU
ES

How to use the analytical instrument

How to use the analytical instrument, Total:73 items.

In the international standard classification, How to use the analytical instrument involves: Fuels, Milk and milk products, Sensory analysis, Analytical chemistry, Fibre optic communications, Air quality, Domestic, commercial and industrial heating appliances, Lubricants, industrial oils and related products, Piezoelectric and dielectric devices.

German Institute for Standardization, How to use the analytical instrument

DIN 10956:2007-08 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use
DIN 10956:2007 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use
DIN 10956:1975 Apparatus for sensory analysis; universal testing glasses and lids, requirements, instructions for use
DIN IEC 62495:2011 Nuclear instrumentation - Portable X-ray fluorescence analysis equipment utilizing a miniature X-ray tube (IEC 62495:2011)
DIN EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008
DIN EN 61290-10-4:2008-02 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007); German version EN 61290-10-4:2007 / Note: Applies in conjunction with DIN EN 61291...
DIN EN 61290-10-2:2008-07 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008 / Note: DIN EN 61290-10-2 (2004-02) remains valid alongside this stan...
DIN EN 61290-10-1:2010-01 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009); German version EN 61290-10-1:2009 / Note: DIN EN 61290-10-1 (2004-02) remains valid along...
DIN 51577-4:1994-02 Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments
DIN EN 61290-10-1:2010 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009); German version EN 61290-10-1:2009
DIN 51577-4:2023-11 Testing of mineral oil hydrocarbons and similar products - Determination of chlorine and bromine content - Part 4: Analysis by energy dispersive X-ray spectrometry with low cost instruments
DIN EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance using an electrical spectrum analyser (IEC 61290-5-3:2002); German version EN 61290-5-3:2002

American Society for Testing and Materials (ASTM), How to use the analytical instrument

ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-04 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-09 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-90(1998) Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM E2551-07 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D7416-09(2020) Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Coun
ASTM D6522-20 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Proce

RU-GOST R, How to use the analytical instrument

GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer

Association Francaise de Normalisation, How to use the analytical instrument

NF C46-252*NF EN 61207-2:1994 Expression of performance of gas analyzers. Part 2 : oxygen in gas (utilizing high-temperature electrochemical sensors).
NF EN 61290-10-2:2008 Amplificateurs optiques - Méthodes d'essai - Partie 10-2 : paramètres à canaux multiples - Méthode d'impulsion utilisant un analyseur de spectre optique stroboscopique
NF EN IEC 61207-2:2019 Expression des qualités de fonctionnement des analyseurs de gaz - Partie 2 : mesure de l'oxygène contenu dans le gaz en utilisant des capteurs électrochimiques à haute température
NF EN 61290-10-4:2007 Amplificateurs optiques - Méthodes d'essai - Partie 10-4 : paramètres à canaux multiples - Méthode par soustraction de source interpolée en utilisant un analyseur de spectre optique
NF C93-805-10-2:2003 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer.
NF C93-805-10-2*NF EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer
NF EN 61290-10-1:2009 Amplificateurs optiques - Méthodes d'essai - Partie 10-1 : paramètres à canaux multiples - Méthode d'impulsion utilisant un interrupteur optique et un analyseur de spectre optique
NF C93-805-5-3*NF EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.
NF EN 60444-5:2001 Mesure des paramètres des résonateurs à quartz - Partie 5 : méthodes pour la détermination des paramètres électriques équivalents utilisant des analyseurs automatiques de réseaux et correction des erreurs
NF EN 61290-5-3:2002 Amplificateurs à fibres optiques - Spécification de base - Partie 5-3 : méthodes d'essai des paramètres de réflectance - Tolérance de réflectance en utilisant un analyseur de spectre électrique
NF EN 60444-11:2011 Mesure des paramètres des résonateurs à quartz - Partie 11 : méthode normalisée pour la détermination de la fréquence de résonance à la charge fL et de la capacité de charge efficace CLeff utilisant des analyseurs automatiques de réseaux et ...

British Standards Institution (BSI), How to use the analytical instrument

BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
PD IEC TR 61292-2:2003 Optical amplifier technical reports. Theoretical background for noise figure evaluation using the electrical spectrum analyzer
BS EN 61290-10-1:2003 Optical amplifiers - Test methods - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
BS EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1:Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
BS 7967:2015 Guide for the use of electronic portable combustion gas analysers for the measurement of carbon monoxide in dwellings and the combustion performance of domestic gas-fired appliances

Danish Standards Foundation, How to use the analytical instrument

DS/EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
DS/EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
DS/EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
DS/EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser

CENELEC - European Committee for Electrotechnical Standardization, How to use the analytical instrument

EN 61290-10-2:2003 Optical amplifiers - Test methods Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
EN 61290-10-1:2003 Optical amplifiers Test methods Part 10-1: Multichannel parameters Pulse method using an optical switch and optical spectrum analyzer

ES-UNE, How to use the analytical instrument

UNE-EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (Endorsed by AENOR in May of 2008.)
UNE-EN 61290-10-1:2009 Optical amplifiers - Test methods -- Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (Endorsed by AENOR in July of 2009.)
UNE-EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification -- Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser. (Endorsed by AENOR in October of 2002.)
UNE-EN 61290-10-4:2007 Optical amplifiers - Test methods -- Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007). (Endorsed by AENOR in November of 2007.)

European Committee for Electrotechnical Standardization（CENELEC）, How to use the analytical instrument

EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
EN 61290-5-3:2002 Optical Fibre Amplifiers - Basic Specification Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance Using an Electrical Spectrum Analyser

International Electrotechnical Commission (IEC), How to use the analytical instrument

IEC 61290-10-2:2007 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
IEC 61290-10-1:2003 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters; Pulse method using an optical switch and optical spectrum analyzer
IEC 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
IEC 61290-5-3:2002 Optical fibre amplifiers - Basic specifications - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance test method using electrical spectrum analyzer

Korean Agency for Technology and Standards (KATS), How to use the analytical instrument

KS C IEC 61290-10-2:2005 Optical amplifiers－Test methods－Part 10－2：Multichannel parameters－Pulse method using a gated optical spectrum analyzer
KS C IEC 61290-10-1:2005 Optical amplifiers－Test methods－Part 10－1：Multichannel parameters－Pulse method using an optical switch and optical spectrum analyzer
KS C IEC 61290-5-3:2003 Basic specification for optical amplifier test methods－Part 5－3：Test methods for reflectance parameters－Reflectance tolerance using an electrical spectrum analyser
KS C IEC 60444-5:2016 Measurement of quartz crystal units parameters ― Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction

Japanese Industrial Standards Committee (JISC), How to use the analytical instrument

JIS C 6122-10-2:2010 Optical amplifiers -- Test methods -- Part 10-2: Multichannel parameters -- Pulse method using a gated optical spectrum analyzer

Lithuanian Standards Office , How to use the analytical instrument

LST EN 61290-10-2-2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007)
LST EN 61290-10-4-2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007)
LST EN 61207-2-2001 Expression of performance of gas analyzers. Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994 + corrigendum 1994)
LST EN 61290-10-1-2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009)
LST EN 61290-5-3-2003 Optical fibre amplifiers. Basic specification. Part 5-3: Test methods for reflectance parameters. Reflectance tolerance using an electrical spectrum analyzer (IEC 61290-5-3:2002)

Indonesia Standards, How to use the analytical instrument

SNI 19-7117.10-2005 Exhaust gas emissions - Stationary sources - Part 10: Test methods of CO, CO2 and O2 concentration using automatic analysis instrumentation

Professional Standard - Energy, How to use the analytical instrument

NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, How to use the analytical instrument

SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

ES-AENOR, How to use the analytical instrument

UNE 118-002-1991

Standard Association of Australia （SAA）, How to use the analytical instrument

AS/NZS 3580.15:2014