ZH
RU
ES

syringe luer

syringe luer, Total:421 items.

In the international standard classification, syringe luer involves: Medical equipment, Dentistry, Pharmaceutics, Sterilization and disinfection, Bottles. Pots. Jars, Medical sciences and health care facilities in general, Cans. Tins. Tubes, Aircraft and space vehicles in general, Veterinary medicine, Products of non-ferrous metals, Packaging materials and accessories.


RO-ASRO, syringe luer

  • SR ISO 594-1:1993 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements
  • SR ISO 594-2:1993 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment Part 2: Lock fittings

International Organization for Standardization (ISO), syringe luer

  • ISO 594-2:1991 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment; part 2: lock fittings
  • ISO 8362-2:1988 Injection containers for injectables and accessories; part 2: closures for injection vials
  • ISO/R 595:1967 Syringes for medical use
  • ISO 11040-6:2012 Prefilled syringes - Part 6: Plastic barrels for injectables
  • ISO 11040-6:2019 Prefilled syringes — Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling
  • ISO 11040-5:2001 Prefilled syringes - Part 5: Plungers for injectables
  • ISO 9187-1:2000 Injection equipment for medical use - Part 1: Ampoules for injectables
  • ISO 7886-2:2020 Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps
  • ISO 8362-4:1989 Injection containers for injectables and accessories; part 4: injection vials made of moulded glass
  • ISO 7886-2:1996 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
  • ISO 8362-6:2010 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials
  • ISO 8362-6:1992 Injection containers for injectables and accessories; part 6: caps made of aluminium-plastics combinations for injection vials
  • ISO 11040-4:2015 Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
  • ISO 8362-5:1995 Injection containers for injectables and accessories - Part 5: Freeze drying closures for injection vials
  • ISO 8362-3:2001 Injection containers and accessories - Part 3: Aluminium caps for injection vials
  • ISO 11040-4:1996 Prefilled syringes - Part 4: Glass barrels for injectables
  • ISO 11040-5:2012 Prefilled syringes - Part 5: Plunger stoppers for injectables
  • ISO 11040-4:2015/Amd 1:2020 Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling — Amendment 1
  • ISO 9997:1999 Dental cartridge syringes
  • ISO/DIS 8362-2:2011 Injection containers and accessories
  • ISO 11040-4:2007 Prefilled syringes - Part 4: Glass barrels for injectables
  • ISO 8362-2:2015 Injection containers and accessories - Part 2: Closures for injection vials
  • ISO 8362-2:2008 Injection containers and accessories - Part 2: Closures for injection vials
  • ISO 7886-1:1993 Sterile hypodermic syringes for single use; part 1: syringes for manual use
  • ISO 7886-1:2017 Sterile hypodermic syringes for single use - Part 1: Syringes for manual use
  • ISO 8362-7:1995 Injection containers for injectables and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
  • ISO 11608-3:2000 Pen-injectors for medical use - Part 3: Finished cartridges; Requirements and test methods
  • ISO 11608-3:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers
  • ISO 8362-4:2003 Injection containers and accessories - Part 4: Injection vials made of moulded glass
  • ISO 8362-1:2003 Injection containers and accessories - Part 1: Injection vials made of glass tubing
  • ISO 8362-1:2009 Injection containers and accessories - Part 1: Injection vials made of glass tubing
  • ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass
  • ISO 21533:2018 Dentistry — Reprocessable cartridge syringes for intraligamentary injections
  • ISO 8362-1:2018 Injection containers and accessories - Part 1: Injection vials made of glass tubing
  • ISO 9997:2020 Dentistry — Cartridge syringes
  • ISO 11608-1:2000 Pen-injectors for medical use - Part 1: Pen-injectors; Requirements and test methods
  • ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections
  • ISO 7886-4:2006 Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature
  • ISO 8362-5:2008 Injection containers and accessories - Part 5: Freeze drying closures for injection vials
  • ISO 8362-5:2016 Injection containers and accessories - Part 5: Freeze drying closures for injection vials
  • ISO 8362-1:1989 Injection containers for injectables and accessories; part 1: injection vials made of glass tubing
  • ISO 8362-3:1989 Injection containers for injectables and accessories; part 3: aluminium caps for injection vials
  • ISO 11040-5:1996 Prefilled syringes - Part 5: Plungers for injectables
  • ISO 8362-2:2015/Amd 1:2022 Injection containers and accessories — Part 2: Closures for injection vials — Amendment 1
  • ISO 15747:2010 Plastic containers for intravenous injections
  • ISO 15747:2003 Plastics containers for intravenous injection
  • ISO 15747:2018 Plastic containers for intravenous injections
  • ISO 11040-8:2016 Prefilled syringes - Part 8: Requirements and test methods for finished prefilled syringes
  • ISO 7886-1:1993/cor 1:1995 Sterile hypodermic syringes for single use - Part 1: Syringes for manual use; Technical Corrigendum 1
  • ISO 11040-7:2015 Prefilled syringes - Part 7: Packaging systems for sterilized subassembled syringes ready for filling
  • ISO 8362-7:2006 Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
  • ISO 8362-1:2009/Amd 1:2015 Injection containers and accessories - Part 1: Injection vials made of glass tubing; Amendment 1

Military Standards (MIL-STD), syringe luer

Indonesia Standards, syringe luer

Korean Agency for Technology and Standards (KATS), syringe luer

British Standards Institution (BSI), syringe luer

  • BS EN ISO 7886-2:1996 Sterile hypodermic syringes for single use. Syringes for use with power-driven syringe pumps
  • BS EN ISO 8362-2:2015+A1:2022 Injection containers and accessories - Closures for injection vials
  • BS EN ISO 7886-1:1997 Sterile hypodermic syringes for single use. Syringes for manual use
  • BS EN ISO 7886-1:2018 Sterile hypodermic syringes for single use. Syringes for manual use
  • BS ISO 11040-4:2007 Prefilled syringes - Glass barrels for injectables
  • BS ISO 11040-4:2015 Prefilled syringes. Glass barrels for injectables and sterilized subassembled syringes ready for filling
  • BS EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Syringes for use with power-driven syringe pumps
  • BS EN ISO 8362-1:2010 Injection containers and accessories. Injection vials made of glass tubing
  • BS EN ISO 8362-1:2009 Injection containers and accessories - Injection vials made of glass tubing
  • BS EN ISO 8362-2:2010 Injection containers and accessories. Part 2: Closures for injection vials
  • BS EN ISO 8362-2:2015 Tracked Changes. Injection containers and accessories. Closures for injection vials
  • BS ISO 11040-4:2015+A1:2020 Prefilled syringes. Glass barrels for injectables and sterilized subassembled syringes ready for filling
  • BS EN ISO 8362-1:2019 Injection containers and accessories - Injection vials made of glass tubing
  • BS EN ISO 8362-3:2003 Injection containers and accessories - Aluminium caps for injection vials
  • BS EN ISO 8362-6:2011 Injection containers and accessories. Caps made of aluminium-plastics combinations for injection vials
  • BS EN ISO 8362-5:2016 Injection containers and accessories. Freeze drying closures for injection vials
  • BS ISO 11040-8:2016 Prefilled syringes. Requirements and test methods for finished prefilled syringes
  • BS ISO 11040-6:2019 Tracked Changes. Prefilled syringes. Plastic barrels for injectables and sterilized subassembled syringes ready for filling
  • BS ISO 11040-7:2015 Prefilled syringes. Packaging systems for sterilized subassembled syringes ready for filling
  • 23/30430984 DC BS ISO 11040-4. Prefilled syringes - Part 4. Glass barrels for injectables and sterilized subassembled syringes ready for filling
  • 19/30383764 DC BS ISO 11040-4 AMD1. Prefilled syringes. Part 4. Glass barrels for injectables and sterilized subassembled syringes ready for filling
  • BS EN ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections
  • BS EN ISO 8362-4:2011 Injection containers and accessories. Injection vials made of moulded glass
  • BS EN ISO 21533:2018 Dentistry. Reprocessable cartridge syringes for intraligamentary injections
  • 19/30380622 DC BS EN ISO 7886-2. Sterile hypodermic syringes for single use. Part 2. Syringes for use with power-driven syringe pumps
  • BS EN ISO 15747:2010 Plastic containers for intravenous injections
  • BS EN ISO 15747:2011 Plastic containers for intravenous injections
  • BS EN ISO 11608-4:2007 Pen-injectors for medical use - Requirements and test methods for electronic and electromechanical pen-injectors
  • BS 1619-2:1988 Re-usable hypodermic syringes for insulin injection - Specification for syringes for use with insulin of strength 100 units per millilitre
  • BS EN ISO 7886-4:2009 Sterile hypodermic syringes for single use - Syringes with re-use prevention feature
  • BS EN ISO 7886-4:2019 Sterile hypodermic syringes for single use - Syringes with re-use prevention feature
  • BS ISO 11040-6:2012 Prefilled syringes. Plastic barrels for injectables
  • BS ISO 11040-5:2012 Prefilled syringes. Plunger stoppers for injectables
  • BS 1263-1:1989 Reusable hypodermic syringes for medical use.. Specification for dimensions of all-glass and metal-and-glass syringes
  • 22/30437561 DC BS EN ISO 8362-2 AMD1. Injection containers and accessories. Part 2. Closures for injection vials

Defense Logistics Agency, syringe luer

IT-UNI, syringe luer

Professional Standard - Medicine, syringe luer

Standard Association of Australia （SAA）, syringe luer

  • AS 1094.1:2004 Sterile hypodermic syringes for single use - Syringes for manual use
  • AS 1094.1:2004/Amdt 1:2005
  • AS 1679:1974 GLASS SYRINGES （LUER FITTING) FOR GENERAL MEDICAL USE
  • AS 4940:2002 User-applied identification labels for use on fluid bags, syringes and drug administration lines
  • AS 1077:1992 Single-use syringes (sterile) for the injection of 100 units per millilitre insulin (U-100)

European Committee for Standardization (CEN), syringe luer

  • EN 28362-2:1993 Injection Containers for Injectables and Accessories - Part 2: Closures for Injection Vials (ISO 8362-2 : 1988)
  • EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
  • EN ISO 7886-2:1997 Sterile Hypodermic Syringes for Single Use - Part 2: Syringes for Use with Power-Driven Syringe Pumps
  • EN ISO 8362-6:2011 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010)
  • EN ISO 9997:2020 Dentistry - Cartridge syringes (ISO 9997:2020)
  • EN ISO 8362-3:2003 Injection containers and accessories Part 3: Aluminium caps for injection vials
  • EN ISO 8362-2:2010 Injection containers and accessories - Part 2: Closures for injection vials
  • EN ISO 11608-3:2022 Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths (ISO 11608-3:2022, Corrected version 2023-01)
  • EN ISO 8362-1:2019 Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2018)
  • EN 29997:1992 Dental cartridge syringes (ISO 9997:1990)
  • EN 28362-3:1993 Injection Containers for Injectables and Accessories - Part 3: Aluminium Caps for Injection Vials (ISO 8362-3 : 1989)
  • EN ISO 8362-5:2016 Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016)
  • prEN 28362-3-1992 Injection containers for injectables and accesssories; part 3: aluminium caps for injection vials (ISO 8362-3:1989)
  • EN ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections
  • EN 28362-1:1993 Injection Containers for Injectables and Accessories - Part 1. Injectable Vials Made of Glass Tubing (ISO 8362-1 : 1989)
  • EN ISO 15747:2005 Plastics containers for intravenous injection
  • EN ISO 15747:2010 Plastic containers for intravenous injections
  • EN ISO 15747:2011 Plastic containers for intravenous injections
  • EN 28362-4:1993 Injection Containers for Injectables and Accessories - Part 4: Injection Vials Made of Moulded Glass (ISO 8362-4 : 1989)
  • prEN 28362-1-1992 Injection containers for injectables and accesssories; part 1: injection vials made of glass tubing (ISO 8362-1:1989)
  • prEN 28362-2-1992 Injection containers for injectables and accesssories; part 2: closures for injection vials (ISO 8362-2:1988)
  • EN ISO 11608-3:2000 Pen-Injectors for Medical Use - Part 3: Finished Cartridges - Requirements and Test Methods ISO 11608-3: 2000
  • EN 29997:1992/AC:1992 Dental cartridge syringes; amendment (ISO 9997:1990)
  • prEN 28362-4-1992 Injection containers for injectables and accesssories; part 4: injection vials made of moulded glass (ISO 8362-4:1989)
  • EN ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass
  • EN ISO 11608-1:2000 Pen-Injectors for Medical Use - Part 1: Pen-Injectors - Requirements and Test Methods ISO 11608-1: 2000
  • EN ISO 8362-2:2015/A1:2022 Injection containers and accessories - Part 2: Closures for injection vials - Amendment 1 (ISO 8362-2:2015/Amd 1:2022)

Association Francaise de Normalisation, syringe luer

  • NF S93-001-2:1997 Sterile hypodermic syringes for single use. Part 2 : syringes for use with power-driven syringe pumps.
  • NF S93-006-6:2012 Prefilled syringes - Part 6 : plastic barrels for injectables.
  • NF S93-006-5*NF ISO 11040-5:2019 Prefilled syringes - Part 5 : plunger stoppers for injectables
  • NF EN ISO 7886-2:2020 Seringues hypodermiques stériles, non réutilisables - Partie 2 : seringues pour pousse-seringues électriques
  • NF ISO 11040-6:2019 Seringues préremplies - Partie 6 : cylindres en plastique pour produits injectables et seringues pré-assemblées stérilisées préremplissables
  • NF S93-110:1993 Injection containers for injectables and accessories. Part 1 : injection vials made of glass tubing.
  • NF S93-111:1993 Injection containers for injectables and accessories. Part 2 : closures for injection vials.
  • NF S93-001-2*NF EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2 : syringes for use with power-driven syringe pumps
  • NF S93-110-2*NF EN ISO 8362-2:2015 Injection containers and accessories - Part 2 : closures for injection vials
  • NF S93-113:1993 Injection containers for injectables and accessories. Part 4 : injection vials made of moulded glass.
  • NF S93-006-6*NF ISO 11040-6:2019 Prefilled syringes - Part 6 : plastic barrels for injectables and sterilized subassembled syringes ready for filling
  • NF ISO 7440-1:1993 Véhicules routiers - Essais des équipements d'injection de combustible - Partie 1 : ensembles porte-injecteur et injecteur de calibration.
  • NF S93-130:1992 INJECTION EQUIPMENT FOR MEDICAL USE. PART 1 : AMPOULES FOR INJECTABLES.
  • NF S93-112:1993 Injection containers for injectables and accessories. Part 3 : aluminium caps for injection vials.
  • NF S93-115:1993 Injection contrainers for injectable and accessories. Part 6 : caps made of aluminium-plastics combinations for injection vials.
  • NF S91-122*NF EN ISO 9997:2020 Dentistry - Cartridge syringes
  • NF EN ISO 9997:2020 Médecine bucco-dentaire - Seringues pour cartouches
  • NF ISO 11040-4:2015 Seringues préremplies - Partie 4 : cylindres en verre pour produits injectables et seringues pré-assemblées stérilisées préremplissables
  • NF S93-112-3*NF EN ISO 8362-3:2003 Injection containers and accessories - Part 3 : aluminium caps for injection vials
  • NF S93-001-1:1997 Sterile hypodermic syringes for single use. Part 1 : syringes for manual use.
  • NF S93-110-1:2010 Injection containers and accessories - Part 1 : injection vials made of glass tubing.
  • NF S93-110-4*NF EN ISO 8362-4:2011 Injection containers and accessories - Part 4 : injection vials made of moulded glass.
  • NF ISO 11040-5:2019 Seringues préremplies - Partie 5 : bouchons-pistons pour produits injectables
  • NF S93-006-4*NF ISO 11040-4:2015 Prefilled syringes - Part 4 : glass barrels for injectables and sterilized subassembled syringes ready for filling
  • NF S91-122:1992 DENTAL CARTRIDGE SYRINGES. (EUROPEAN STANDARD EN 29997).
  • NF S91-122:2000 Dental cartridge syringues.
  • NF S93-110-2:2010 Injection containers and accessories - Part 2 : closures for injection vials.
  • NF S91-184:2004 Dentistry - Reusable cartridge syringes intented for intraligamentary injections.
  • NF S91-184*NF EN ISO 21533:2018 Dentistry - Reprocessable cartridge syringes for intraligamentary injections
  • NF S93-006-4/A1*NF ISO 11040-4/A1:2020 Prefilled syringes - Part 4 : glass barrels for injectables and sterilized subassembled syringes ready for filling - Amendment 1
  • NF ISO 11040-4/A1:2020 Seringues préremplies - Partie 4 : cylindres en verre pour produits injectables et seringues pré assemblées stérilisées préremplissables - Amendement 1
  • NF S93-001-4:2006 Sterile hypodermic syringes for single use - Part 4 : syringues with re-use prevention feature.
  • NF S93-001-4:2009 Sterile hypodermic syringes for single use - Part 4 : syringes with re-use prevention feature.
  • NF S93-001-1*NF EN ISO 7886-1:2018 Sterile hypodermic syringes for single use - Part 1 : syringes for manual use
  • NF S93-112-5:2008 Injection containers and accessories - Part 5 : freeze drying closures for injection vials.
  • NF S93-110-1*NF EN ISO 8362-1:2019 Injection containers and accessories - Part 1 : injection vials made of glass tubing
  • NF EN ISO 8362-5:2016 Récipients et accessoires pour produits injectables - Partie 5 : bouchons à lyophilisation pour flacons d'injection
  • NF S93-105:2005 Plastics containers for intravenous injection.
  • NF S93-105:2012 Plastic containers for intravenous injections.
  • NF S93-105*NF EN ISO 15747:2019 Plastic containers for intravenous injections
  • NF EN ISO 15747:2019 Récipients en plastique pour injections intraveineuses
  • NF S93-112-5*NF EN ISO 8362-5:2016 Injection containers and accessories - Part 5 : freeze drying closures for injection vials
  • NF EN ISO 21533:2018 Médecine bucco-dentaire - Seringues à cartouche pour injections intraligamentaires, pouvant être retraitées
  • NF S93-006-8*NF ISO 11040-8:2017 Prefilled syringes - Part 8 : requirements and test methods for finished prefilled syringes
  • NF EN ISO 7886-1:2018 Seringues hypodermiques stériles, non réutilisables - Partie 1 : seringues pour utilisation manuelle
  • NF ISO 11040-8:2017 Seringues préremplies - Partie 8 : exigences et méthodes d'essai pour seringues préremplies prêtes à l'emploi
  • NF ISO 11040-7:2015 Seringues préremplies - Partie 7 : système d'emballage pour les seringues stérilisées prêtes à l'emploi et préremplissables

German Institute for Standardization, syringe luer

  • DIN EN ISO 7886-2:1997 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1997); German version EN ISO 7886-2:1997
  • DIN EN ISO 8362-3:2003-10 Injection containers for injectables and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001); German version EN ISO 8362-3:2003; German and English texts
  • DIN 13989:2013 Dentistry - Syringes without lever for intraligamental injections
  • DIN ISO 11040-6:2021 Prefilled syringes - Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling (ISO 11040-6:2019)
  • DIN ISO 11040-5:2013-12 Prefilled syringes - Part 5: Plunger stoppers for injectables (ISO 11040-5:2012)
  • DIN EN ISO 7886-1:1997 Sterile hypodermic syringes for single use - Part 1: Syringes for manual use (ISO 7886-1:1993, including Technical Corrigendum 1:1995); German version EN ISO 7886-1:1996
  • DIN EN ISO 8362-3:2003 Injection containers for injectables and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001); German version EN ISO 8362-3:2003; German and English texts
  • DIN EN ISO 9997:2020-05 Dentistry - Cartridge syringes (ISO 9997:2020); German version EN ISO 9997:2020
  • DIN EN ISO 8362-2:2022-12 Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015 + Amd 1:2022); German version EN ISO 8362-2:2015 + A1:2022
  • DIN ISO 11040-4:2017-07 Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling (ISO 11040-4:2015)
  • DIN ISO 11040-6:2021-05 Prefilled syringes - Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling (ISO 11040-6:2019)
  • DIN EN ISO 7886-2:2020-10 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020); German version EN ISO 7886-2:2020
  • DIN ISO 11040-4:2017 Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling (ISO 11040-4:2015)
  • DIN EN ISO 7886-1:2020-11 Sterile hypodermic syringes for single use - Part 1: Syringes for manual use (ISO 7886-1:2017, Corrected version 2019-08); German version EN ISO 7886-1:2018
  • DIN EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
  • DIN ISO 11040-6:2020 Prefilled syringes - Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling (ISO 11040-6:2019); Text in German and English
  • DIN ISO 11040-4:2007 Prefilled syringes - Part 4: Glass barrels for injectables (ISO 11040-4:2007); Text in German and English
  • DIN EN ISO 21533:2018-04 Dentistry - Reprocessable cartridge syringes for intraligamentary injections (ISO 21533:2018); German version EN ISO 21533:2018
  • DIN EN ISO 8362-5:2016-07 Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016); German version EN ISO 8362-5:2016
  • DIN EN ISO 7886-4:2006 Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO 7886-4:2006); German version EN ISO 7886-4:2006
  • DIN ISO 11040-5:2013 Prefilled syringes - Part 5: Plunger stoppers for injectables (ISO 11040-5:2012)
  • DIN EN ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003); German version EN ISO 21533:2003
  • DIN EN ISO 8362-6:2011-07 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010); German version EN ISO 8362-6:2011
  • DIN EN ISO 8362-1:2020-01 Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2018); German version EN ISO 8362-1:2019
  • DIN EN ISO 15747:2019-07 Plastic containers for intravenous injections (ISO 15747:2018); German version EN ISO 15747:2019
  • DIN EN ISO 8362-4:2011-12 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011); German version EN ISO 8362-4:2011
  • DIN ISO 11040-8:2020-11 Prefilled syringes - Part 8: Requirements and test methods for finished prefilled syringes (ISO 11040-8:2016)
  • DIN EN ISO 9997:2020 Dentistry - Cartridge syringes (ISO 9997:2020)
  • DIN ISO 11040-7:2020-11 Prefilled syringes - Part 7: Packaging systems for sterilized subassembled syringes ready for filling (ISO 11040-7:2015)

Professional Standard - Pharmaceutical Packaging, syringe luer

  • YBB 0009-2004 Stainless steel needles for prefilled syringes
  • YBB 0011-2004 Assemblages for prefilled syringes (with stainless steel needles)
  • YBB 0014-2004 Caps for for pen-injectors for medical use

HU-MSZT, syringe luer

TR-TSE, syringe luer

Japanese Industrial Standards Committee (JISC), syringe luer

国家食品药品监督管理局, syringe luer

  • YY/T 0573.2-2018 Single use sterile syringes Part 2: Syringes for power driven syringe pumps

VN-TCVN, syringe luer

  • TCVN 5903-1995 Sterile hypodermic syringes for single use.Syringes for manual use

IN-BIS, syringe luer

ZA-SANS, syringe luer

  • SANS 1775:1999 Sterile single-use intravenous (IV) infusion sets (administration sets)
  • SANS 9187-1:2007 Injection equipment for medical use Part 1: Ampoules for injectables
  • SANS 1124-2:1998 Syringes and needles (sterile-packed for single use) Part 2: Syringes
  • SANS 8362-1:1989 Injection containers for injectables and accessories Part 1: Injection vials made of glass tubing
  • SANS 1384:2006 Plastics containers for parenteral solutions
  • SANS 5548:1987 Sterility of syringes and needles
  • SANS 1124-1:1998 Syringes and needles (sterile-packed for single use) Part 1: Injection needles
  • SANS 1166:2006 Syringes with or without needles for the injection of insulin (sterile-packed for single use)

KR-KS, syringe luer

Danish Standards Foundation, syringe luer

  • DS/ISO 11040-5:2012 Prefilled syringes - Part 5: Plunger stoppers for injectables
  • DS/EN ISO 7886-2:1998 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
  • DS/ISO 8362-2:1993 Injection containers for injectables and accessories. Part 2: Closures for injection vials
  • DS/ISO 8362-3:1993 Injection containers for injectables and accessories. Part 3: Aluminium caps for injection vials
  • DS/EN 28362-2:1993 Injection containers for injectables and accessories. Part 2: Closures for injection vials
  • DS/EN 28362-3:1993 Injection containers for injectables and accessories. Part 3: Aluminium caps for injection vials
  • DS/ISO 7886-1:1994 Sterile hypodermic syringes for single use-Part 1:Syringes for manual use
  • DS/ISO 8362-1:1993 Injection containers for injectables and accessories. Part 1: Injection vials made of glass tubing
  • DS/EN 28362-1:1993 Injection containers for injectables and accessories. Part 1: Injection vials made of glass tubing
  • DS/ISO 11040-6:2012 Prefilled syringes - Part 6: Plastic barrels for injectables
  • DS/ISO 8362-4:1993 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass
  • DS/EN 28362-4:1993 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass
  • DS/EN ISO 9997:2000 Dental cartridge syringes
  • DS/EN ISO 8362-3:2003 Injection containers and accessories - Part 3: Aluminium caps for injection vials
  • DS/EN ISO 8362-2:2010 Injection containers and accessories - Part 2: Closures for injection vials
  • DS/EN ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass
  • DS/EN ISO 7886-1:1997 Sterile hypodermic syringes for single use - Part 1: Syringes for manual use
  • DS/EN ISO 8537:1994 Sterile single-use syringes,with or without needle, for insulin
  • DS/EN ISO 8362-1:2010 Injection containers and accessories - Part 1: Injection vials made of glass tubing
  • DS/EN ISO 8362-6:2011 Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials
  • DS/EN ISO 15747:2010 Plastic containers for intravenous injections
  • DS/EN ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections

Taiwan Provincial Standard of the People's Republic of China, syringe luer

Professional Standard - Machinery, syringe luer

GOSTR, syringe luer

  • GOST R ISO 7886-2-2017 Sterile hypodermic syringes for single use. Part 2. Syringes for use with power-driven syringe pumps
  • GOST R ISO 8362-3-2019 Injection containers and accessories. Part 3. Aluminium caps for injection vials. General technical requirements

RU-GOST R, syringe luer

ES-UNE, syringe luer

  • ISO/DIS 11040-4:2023 Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
  • UNE-EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
  • UNE-EN ISO 9997:2020 Dentistry - Cartridge syringes (ISO 9997:2020)
  • UNE-EN ISO 8362-2:2015 Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015)
  • UNE-EN ISO 7886-1:2018 Sterile hypodermic syringes for single use - Part 1: Syringes for manual use (ISO 7886-1:2017, Corrected version 2019-08)
  • UNE-EN ISO 8362-5:2016 Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016)
  • UNE-EN ISO 21533:2018 Dentistry - Reprocessable cartridge syringes for intraligamentary injections (ISO 21533:2018) (Endorsed by Asociación Española de Normalización in March of 2018.)
  • UNE-EN ISO 8362-1:2020 Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2018)
  • UNE-EN ISO 15747:2019 Plastic containers for intravenous injections (ISO 15747:2018)
  • UNE-EN ISO 8362-2:2015/A1:2023 Injection containers and accessories - Part 2: Closures for injection vials - Amendment 1 (ISO 8362-2:2015/Amd 1:2022)
  • ISO/DIS 11040-7:2023 Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling

NL-NEN, syringe luer

  • NEN-ISO 8362-2:1993 Injection containers for injectables and accessories. Part 2: Closures for injection vials (ISO 8362-2:1988)

TH-TISI, syringe luer

AT-ON, syringe luer

  • ONORM EN 29997-1992 Dental cartridge syringes
  • ONORM EN 28362-2-1994 Injection containers for injectables and accessories. Part 2: Closures for injection vials (ISO 8362-2:1988)
  • ONORM EN 28362-3-1994 Injection containers for injectables and accessories. Part 3: Aluminium caps for injection vials (ISO 8362-3:1989)
  • ONORM EN 28362-1-1994 Injection containers for injectables and accessories. Part 1: Injection vials made of glass tubing (ISO 8362-1:1989)

U.S. Military Regulations and Norms, syringe luer

Professional Standard - Agriculture, syringe luer

Group Standards of the People's Republic of China, syringe luer

农业部, syringe luer

CEN - European Committee for Standardization, syringe luer

  • EN ISO 7886-1:2018 Sterile hypodermic syringes for single use - Part 1: Syringes for manual use
  • EN ISO 11608-3:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers
  • EN ISO 8362-1:2009 Injection containers and accessories - Part 1: Injection vials made of glass tubing (Incorporates Amendment A1: 2015)
  • EN ISO 21533:2018 Dentistry - Reprocessable cartridge syringes for intraligamentary injections
  • EN ISO 15747:2019 Plastic containers for intravenous injections
  • EN ISO 8362-4:2004 Injection containers and accessories - Part 4: Injection vials made of moulded glass

PL-PKN, syringe luer

  • PN Z55114-1988 Medical instruments Needles and syringes for injections Rigid conical fittings dimensions
  • PN-EN ISO 7886-2-2020-11 E Sterile hypodermic syringes for single use -- Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)

AENOR, syringe luer

  • UNE-EN ISO 7886-2:1998 STERILE HYPODERMIC SYRINGES FOR SINGLE USE. PART 2: SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS. (ISO 7886-2:1996).
  • UNE-EN ISO 9997:2000 DENTAL CARTRIDGE SYRINGES (ISO 9997:1999)
  • UNE-EN ISO 8362-3:2003 Injection containers and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001)
  • UNE-EN ISO 8362-4:2012 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011)

AR-IRAM, syringe luer

未注明发布机构, syringe luer

  • BS EN ISO 7886-1:2018(2019) Sterile hypodermic syringes for single use Part 1 : Syringes for manual use
  • DIN EN ISO 11608-1:2001 Pen injectors for medical use – Part 1: Pen injectors – Requirements and test methods (ISO 11608-1:2000)
  • BS 1619-2:1988(1999) Reusable hypodermic syringes for insulin injection — Part 2 : Specificationforsyringes foruse with insulin ofstrength 100 units per millilitre

国家药监局, syringe luer

  • YY/T 0573.4-2020 Single Use Sterile Syringes Part 4: Preventing Reuse of Syringes
  • YY/T 0573.3-2019 Single-use sterile syringes Part 3: Self-destructible fixed-dose vaccine syringes

Lithuanian Standards Office , syringe luer

  • LST EN ISO 7886-2:2001 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996)
  • LST EN ISO 8362-2:2010 Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2008)
  • LST EN ISO 8362-3:2003 Injection containers and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001)
  • LST EN ISO 9997:2002 Dental cartridge syringes (ISO 9997:1999)
  • LST EN ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011)

CH-SNV, syringe luer

  • SN EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)

National Metrological Verification Regulations of the People's Republic of China, syringe luer

  • JJG 18-1990 Verification Regulation of Glass Syringes for Medical Use
  • JJG 18-2008 Verification Regulation of Syringes for Medical Use

BE-NBN, syringe luer

  • NBN-EN 28362-1-1993 Injection containers for injectables and accessories. Part 1: Injection vials made of glass tubing (ISO 8362-1: 1989)
  • NBN-EN 28362-2-1993 Injection containers for injectables and accessories. Part 2: Closures for injection vials (ISO 8362-2: 1988)

SE-SIS, syringe luer

Professional Standard - Non-ferrous Metal, syringe luer

  • YS/T 77-2011 Leaded brass bar for making needle seat of syringe

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, syringe luer

  • GB 15810-2001 Sterile hypodermic syringes for single use--Part 1: Syringes for manual use

国家市场监督管理总局、中国国家标准化管理委员会, syringe luer

  syringe, Syringe, Syringe Micro+, micro syringe, Syringe instrument, iso syringe, syringe iso, mixing syringe, Syringe taper, Syringe taper, glass syringe, luer needle syringe, luer syringe, luer syringe, luer, luer+syringe, syringe luer, luer lock, luer needle syringe, luer lock.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved