ZH
RU
ES
How to use powder flow meter
How to use powder flow meter, Total:201 items.
In the international standard classification, How to use powder flow meter involves: Powder metallurgy, Measurement of fluid flow, Ceramics, Plastics, Electronic components in general, Ferrous metals, Materials for aerospace construction, Particle size analysis. Sieving, Paints and varnishes, Waxes, bituminous materials and other petroleum products, Analytical chemistry, Electrical equipment for working in special conditions, Road engineering, Industrial automation systems, Cereals, pulses and derived products, Rubber and plastics products, Protection against fire, Rubber, Testing of metals, Construction materials, Fluid power systems, Raw materials for rubber and plastics, Footwear, Products of the textile industry, Nuclear energy engineering, Lubricants, industrial oils and related products, Measurement of volume, mass, density, viscosity, Protection of and in buildings, Soil quality. Pedology, Corrosion of metals, Water quality, Petroleum products in general, Mechanical testing, Aids for disabled or handicapped persons, Products of the chemical industry.
Japanese Industrial Standards Committee (JISC), How to use powder flow meter
- JIS Z 2502:2000 Metallic powders -- Determination of flowability by means of a calibrated funnel (Hall flowmeter)
- JIS Z 2502:2012 Metallic powders -- Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- JIS Z 2502:1979 Method for determination of flow rate of metal powders
Association Francaise de Normalisation, How to use powder flow meter
- NF A95-113:1984 Powder metallurgy. Metallic powders. Determination of flowability by means of a calibrated funnel (hall flowmeter).
- NF EN ISO 13517:2020 Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (cône d'écoulement de Gustavsson)
- NF EN ISO 4490:2018 Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (appareil de Hall)
- NF EN ISO 7973:2016 Céréales et produits de mouture des céréales - Détermination de la viscosité de la farine - Méthode utilisant un amylographe
- NF EN ISO 8130-2:2021 Poudres pour revêtement - Partie 2 : détermination de la masse volumique à l'aide d'un pycnomètre à gaz (méthode de référence)
- NF X11-622:1977 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. Various readings of the basic method.
- NF ISO 18869:2020 Transmissions hydrauliques - Méthodes d'essai pour les raccords actionnés avec ou sans outils
- NF EN 17408:2020 Détermination de l'aptitude à l'écoulement et à l'application des adhésifs viscoélastiques avec la méthode de la rhéologie oscillométrique
- NF X65-011-2*NF ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2 : primary calibration methods
- NF P98-722:1992 Road construction and maintenance equipment. Continuous batching equipment for products in powder form. Test bench and method of flow rate measurement.
- NF E49-160-2*NF ISO 6358-2:2020 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 2 : alternative test methods
British Standards Institution (BSI), How to use powder flow meter
- BS EN ISO 4490:2014 Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- BS EN ISO 4490:2008 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
- BS 3900-J9:1993 Methods of test for paints - Testing of coating powders - Determination of flow properties of a coating powder/air mixture
- BS ISO 20720:2018 Microbeam analysis. Methods of specimen preparation for analysis of general powders using WDS and EDS
- PD ISO/TS 3550-3:2015 Cigarettes. Determination of loss of tobacco from the ends. Method using a vibro-bench
- BS 4317-22:1989 Methods of test for cereals and pulses. Determination of water absorption of flour and rheological properties of doughs using a valorigraph
- BS EN ISO 7973:2015 Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph
- BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
- PD ISO/TS 17951-2:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using continuous flow analysis (CFA) with automated in-line distillation
- BS ISO 6358-2:2019 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids - Alternative test methods
- BS ISO 18869:2017 Tracked Changes. Hydraulic fluid power. Test methods for couplings actuated with or without tools
- BS ISO 6358-1:2013+A1:2020 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. General rules and test methods for steady-state flow
- BS 4317-20:1999 Methods of test for cereals and pulses - Determination of water absorption of flour and rheological properties of doughs using a farinograph
- BS ISO 24578:2021 Hydrometry. Acoustic Doppler profiler. Method and application for measurement of flow in open channels from a moving boat
- PD ISO/TS 17951-1:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
- BS 4359-4:1995 Determination of the specific surface area of powders - Recommendations for methods of determination of metal surface area using gas adsorption techniques
- 15/30287670 DC BS ISO 17951-2. Water quality. Determination of fluoride using flow analysis (FIA and CFA). Part 2. Method using continuous flow analysis (CFA) with automated in-line distillation
- BS ISO 6358-2:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Alternative test methods
American Society for Testing and Materials (ASTM), How to use powder flow meter
- ASTM D7891-15 Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
- ASTM B855-17 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
- ASTM B213-11 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B213-13 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
- ASTM B212-21 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B212-12 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B212-17 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B212-13 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B212-09 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B417-22 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM B417-18 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM B964-16 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM D7743-12 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders
- ASTM D2396-94(2004) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
- ASTM D2396-94(1999)e1 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
- ASTM D2396-94(2012) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
- ASTM D4242-07(2017) Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
- ASTM B212-99 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B212-99(2006) Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B417-00(2006)e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM B417-00 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM B213-20 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B213-17 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
- ASTM B703-10 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
- ASTM B964-23 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM B855-11 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
- ASTM B964-09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM B417-11 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM B417-13 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
- ASTM D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7175-07 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7175-05e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D5158-98(2013) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
- ASTM D5757-00(2006) Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
- ASTM D5757-00 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
- ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM B855-94(1999)e1 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
- ASTM B855-22 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
- ASTM B329-18 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
- ASTM B329-20 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
- ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
- ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
- ASTM B855-06 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
- ASTM A966/A966M-96(2006) Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
- ASTM A966/A966M-96(2001) Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
- ASTM A966/A966M-07 Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
- ASTM A966/A966M-15 Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
- ASTM D5099-08 Standard Test Methods for Rubberx2014;Measurement of Processing Properties Using Capillary Rheometry
- ASTM D6204-12 Standard Test Method for Rubbermdash;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
- ASTM D6587-12 Standard Test Method for Yarn Number Using Automatic Tester
- ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
- ASTM D7552-22 Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer
- ASTM C1110-03(2008) Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
- ASTM D5099-08(2017) Standard Test Methods for Rubber&x2014;Measurement of Processing Properties Using Capillary Rheometry
- ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
- ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
- ASTM D7681-11(2021) Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
- ASTM D7552-09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
- ASTM F1678-96 Standard Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
- ASTM D7271-06(2020) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
- ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM B962-17 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
- ASTM B962-14 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy 40;PM41; Products Using Archimedesrsquo; Principle
- ASTM D7175-08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
- ASTM G73-10 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
- ASTM D7405-08 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7405-10 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7405-08a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7405-15 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7405-20 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM B934-15 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
- ASTM D6951/D6951M-09(2015) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
- ASTM D6951-03 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
- ASTM D6951/D6951M-09 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
- ASTM D6601-02 Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
- ASTM D6601-19 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
- ASTM D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D664-11ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- ASTM D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- ASTM D664-18e2 Test Method for Determination of Flexible Creep Hardness of Asphalt Binders Using a Bending Beam Rheometer
IN-BIS, How to use powder flow meter
Professional Standard - Aviation, How to use powder flow meter
- HB 5441.6-1989 Performance testing of powder metallurgy products and powders Test methods for fluidity of metal powders
Korean Agency for Technology and Standards (KATS), How to use powder flow meter
- KS L 1626-2012 Testing method for flowability of fine ceramic powders
- KS D 0410-2012(2017) Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting
- KS D ISO 10070:2004 Metallic powders－Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
- KS F 2393-2014 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
- KS F 2393-2019 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
- KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
- KS F 2428-1990 Testing Method for Determination of Vibrating Factor by Consistency of Concrete
国家市场监督管理总局、中国国家标准化管理委员会, How to use powder flow meter
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use powder flow meter
- GB/T 28861-2012 Test method for measuring melt fluidity of encapsulating material of powdered epoxy
European Committee for Standardization (CEN), How to use powder flow meter
- prEN ISO 13947 Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
International Organization for Standardization (ISO), How to use powder flow meter
- ISO/CD 13947:2023 Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
- ISO/DIS 13947:2022 Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
- ISO 20720:2018 Microbeam analysis - Methods of specimen preparation for analysis of general powders using WDS and EDS
- ISO 12926:2012 Aluminium fluoride for industrial use - Determination of trace elements - Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
(U.S.) Ford Automotive Standards, How to use powder flow meter
YU-JUS, How to use powder flow meter
- JUS G.S1.508-1997 Plastics - Determination of powder-mix time of PVC resins using a torque rheometer
Society of Automotive Engineers (SAE), How to use powder flow meter
RU-GOST R, How to use powder flow meter
- GOST R IEC 61241-2-1-1999 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 1. Methods for determining the minimum ignition temperatures of dust
- GOST R IEC 61241-2-2-1999 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 2. Method for determining the electrical resistivity of dust in layers
- GOST R IEC 61241-2-3-1999 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 3. Method for determining minimum ignition energy of dust/air mixtures
- GOST R 56028-2014 Fire engineering. Automatic gas-powder fire extinguishing systems. General technical requirements. Test methods
- PNST 87-2016 Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the properties using a dynamic shear rheometer (DSR)
- PNST 89-2016 Automobile roads of general use. Petroleum-based bitumen binders. The method of determining the low temperature properties using dynamic shear rheometer (DSR)
The American Road & Transportation Builders Association, How to use powder flow meter
- AASHTO T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- AASHTO T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- AASHTO TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
- AASHTO TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO - American Association of State Highway and Transportation Officials, How to use powder flow meter
- TP5-1998 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2004 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- TP5-1997 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2012 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2005 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
- T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- TP5-1993 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Edition 1B)
- TP 123-2016 Standard Method of Test for Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer
- TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
- TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
- T245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (Nineteenth Edition; ASTM D1559-76)
- T 315-2002 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (HM-22; Part IIB; Formaly AASHTO TP 5)
- TP 79-2009 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
- TP 79-2012 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
- TP 79-2011 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt: (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
Professional Standard - Machinery, How to use powder flow meter
- JB/T 9233.14-1999 General methods of testing the performance of industrial process measurement and control instruments.Start current
- JB/T 9233.15-1999 General methods of testing the performance of industrial process measurement and control instruments.DC electrical power consumption
- JB/T 9233.16-1999 General methods of testing the performance of industrial process measurement and control instruments.AC electrical power consumption
ES-UNE, How to use powder flow meter
- UNE-EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)
German Institute for Standardization, How to use powder flow meter
- DIN EN ISO 7973:2016-03 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992); German version EN ISO 7973:2015
- DIN EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)
- DIN EN ISO 14403-2:2012-10 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012); German version EN ISO 14403-2:2012
- DIN EN ISO 14403-1:2012-10 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA); (ISO 14403-1:2012); German version EN ISO 14403-1:2012
Lithuanian Standards Office , How to use powder flow meter
- LST ISO 7973:2006 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (idt ISO 7973:1992)
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use powder flow meter
- ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
- ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
American National Standards Institute （ANSI), How to use powder flow meter
ES-AENOR, How to use powder flow meter
- UNE 115-215-1991 Earth moving machinery. Operation and maintenance. Training of mechanics
GOSTR, How to use powder flow meter
- GOST R 58400.10-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method for determination of the properties using a dynamic shear rheometer (DSR)
- GOST R 58400.9-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method for determination of low temperature properties using dynamic shear rheometer (DSR)
TR-TSE, How to use powder flow meter
- TS 2950-1978 Measurement Of Water Flow In Closed Conduits - Tracer Methods Part III: Constant Rate Injection Method Using Radioactive Tracers
Standard Association of Australia （SAA）, How to use powder flow meter
- AS 3778.4.10:2022 Measurement of water flow in open channels, Part 4.10: Measurement using flow gauging structures — End-depth method for estimation of flow in channels with a free overfall (ISO 18481:2017, IDT)
IT-UNI, How to use powder flow meter
- UNI ISO 6358-2:2020 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids - Part 2: Alternative test methods
Danish Standards Foundation, How to use powder flow meter
- DS/EN ISO 14403-1:2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA)
- DS/EN ISO 14403-2:2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA)
- DS/ISO 17190-9:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 9: Test method for gravimetric determination of flow rate and bulk density
VN-TCVN, How to use powder flow meter
- TCVN 7723-2-2015 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) .Part 2:Method using continuous flow analysis (CFA)