ZH
RU
ES

Measurement of Surface Energy of Solids

Measurement of Surface Energy of Solids, Total:397 items.

In the international standard classification, Measurement of Surface Energy of Solids involves: Adhesives, Rubber and plastics products, Vocabularies, Paints and varnishes, Particle size analysis. Sieving, Sports equipment and facilities, Radiation protection, Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Wood-based panels, Linear and angular measurements, Measurement of fluid flow, Analytical chemistry, Conducting materials, Road engineering, Products of the chemical industry, Insulating fluids, Radiation measurements, Optoelectronics. Laser equipment, Non-textile floor coverings, Domestic, commercial and industrial heating appliances, Protection of and in buildings, Acoustics and acoustic measurements, Metrology and measurement in general, Wastes, Fuels, Construction of airports, Protective equipment, Floor treatment appliances, Piezoelectric and dielectric devices, Construction materials, Testing of metals, Optics and optical measurements, Road vehicle systems, Air quality, Rubber, Semiconducting materials, Resistors, Items of art and handicrafts, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Equipment for petroleum and natural gas industries, Installations in buildings, Nuclear energy engineering, Explosion protection, Alarm and warning systems, Glass, Semiconductor devices, Vibrations, shock and vibration measurements, Environmental protection, Cellular materials, Elements of buildings.

European Committee for Standardization (CEN), Measurement of Surface Energy of Solids

EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
EN ISO 19403-5:2020 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
prEN 828-1992 Adhesives; wettability; determination by measurement of contact angle and critical surface tension of solid surface
EN 828:1997 Adhesives - Wettability - Determination by Measurement of Contact Angle and Critical Surface Tension of Solid Surface
EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
EN 1569:1999 Surfaces for sports areas - Determination of the behaviour under a rolling load
EN 1149-1:2006 Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity
EN 1149-1:1995 Protective Clothing - Electrostatic Properties Part 1: Surface Resistivity (Test Methods and Requirements)
CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
EN ISO 13565-1:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties Part 1: Filtering and General Measurement Conditions
PD CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
EN 14774-3:2009 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample

German Institute for Standardization, Measurement of Surface Energy of Solids

DIN EN 828:2013-04 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface; German version EN 828:2013
DIN EN ISO 19712-3:2022-07 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022); German version EN ISO 19712-3:2022
DIN 55660-2:2011 Paints and varnishes - Wettability - Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle
DIN EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
DIN EN ISO 19403-2:2020-04 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017); German version EN ISO 19403-2:2020
DIN EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface; German version EN 828:2013
DIN 55660-5:2012 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
DIN EN ISO 19712-2:2013-04 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007); German version EN ISO 19712-2:2013
DIN 66126:2015 Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
DIN 66126:2015-08 Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
DIN 66132:1975 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Duembgen
DIN EN ISO 19403-5:2020 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
DIN ISO 697:1984-01 Surface active agents: washing powders; determination of apparent density; method by measuring the mass of a given volume
DIN EN ISO 19403-5:2020-04 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017); G...
DIN EN ISO 19403-5:2023-10 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO/DIS 19403-5:2023...
DIN ISO 7503-1:1990 Evaluation of surface contamination; beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters; identical with ISO 7503-1:1988
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN ISO 13472-1:2023-02 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method (ISO 13472-1:2022); Text in German and English / Note: Date of issue 2023-01-06*Intended as replacement for DIN ISO 13472-1 (2004-04).
DIN ISO 697:1984 Surface active agents: washing powders; determination of apparent density; method by measuring the mass of a given volume
DIN EN 13036-4:2011-12 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test; German version EN 13036-4:2011
DIN EN ISO 19403-2:2023-10 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO/DIS 19403-2:2023); German and English version prEN ISO 19403-2:2023 / Note: Date of issue 2023-09-15*Intended as...
DIN EN 13036-3:2003 Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability; German version EN 13036-3:2002
DIN CEN/TS 15862:2012-11*DIN SPEC 91233:2012-11 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions; German version CEN/TS 15862:2012
DIN 66132:1975-07 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Dümbgen
DIN 19659:2021-12 Characterization of solids - Quality assurance and quality control - Re-transferability of measurement results of the test characteristics with regard to their distinctness and distribution in the population / Note: Date of issue 2021-11-19
DIN EN 60444-8:2017-11 Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units (IEC 60444-8:2016); German version EN 60444-8:2017 / Note: DIN EN 60444-8 (2004-03) remains valid alongside this standard until 2020-01-19.
DIN EN 60444-8:2004 Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units (IEC 60444-8:2003); German version EN 60444-8:2003
DIN 50447:1995 Testing of materials for semiconductor technology - Contactless determination of the electrical sheet resistance of semiconductor layers with the eddy-current method
DIN 66134:1998 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN EN 12139:1999 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC; German version EN 12139:1999
DIN EN 1149-1:2006-09 Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity; German version EN 1149-1:2006
DIN EN ISO 3746:2011-03 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010); German version EN ISO 3746:2010
DIN EN 15758:2010-12 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects; German version EN 15758:2010
DIN 66134:1998-02 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN 55660-4:2012 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
DIN 66126-1:1989 Determination of specific surface area of disperse solids by the permeability technique; fundamentals
DIN EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (IEC 62631-3-2:2015); German version EN 62631-3-2:2016
DIN EN 623-4:2005-01 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness; German version EN 623-4:2004
DIN ISO 13472-2:2010 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces (ISO 13472-2:2010)
DIN EN 60115-9:2004-10 Fixed resistors for use in electronic equipment - Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors (IEC 60115-9:2003); German version EN 60115-9:2004
DIN EN 19694-1:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects; German version EN 19694-1:2016
DIN EN 60115-9:2004 Fixed resistors for use in electronic equipment - Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors (IEC 60115-9:2003); German version EN 60115-9:2004
DIN EN IEC 61207-2:2021-03 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors (IEC 61207-2:2019); German version EN IEC 61207-2:2019 / Note: DIN EN 61207-2 (1995-02) remains valid alongside this standar...
DIN EN ISO 13565-1:1998-04 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997

Association Francaise de Normalisation, Measurement of Surface Energy of Solids

NF EN 828:2013 Adhésifs - Mouillabilité - Détermination par mesurage de l'angle de contact et de l'énergie superficielle libre de la surface solide
NF T54-370-3*NF EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3 : determination of properties - Solid surface shapes
NF T76-150*NF EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
NF T30-131-2*NF EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2 : determination of the surface free energy of solid surfaces by measuring the contact angle
NF EN ISO 19403-2:2020 Peintures et vernis - Mouillabilité - Partie 2 : détermination de l'énergie libre de surface des surfaces solides par la mesure de l'angle de contact
NF T54-370-2*NF EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2 : determination of properties - Sheet goods
NF C26-631-3-2*NF EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2 : determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
NF B56-013:1980 Panneaux fibragglo - Détermination de la masse volumique et de la masse surfacique
NF X11-620:1996 Determination of the specific surface area of solids by gas adsorption using the bet method.
NF EN ISO 105-J01:2000 Textiles - Essais de solidité des teintures - Partie J01 : principes généraux du mesurage de la couleur de surface
NF EN ISO 2286-2:2016 Supports textiles revêtus de caoutchouc ou de plastique - Détermination des caractéristiques des rouleaux - Partie 2 : méthodes de détermination de la masse surfacique totale, de la masse surfacique du revêtement et de la masse surfacique du support
NF T30-131-5*NF EN ISO 19403-5:2020 Paints and varnishes - Wettability - Part 5 : determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
NF EN ISO 19712-3:2022 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 3 : détermination des propriétés - Produits mis en forme
NF EN ISO 19712-2:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 2 : détermination des propriétés - Produits en feuilles
NF EN ISO 19403-5:2020 Peintures et vernis - Mouillabilité - Partie 5 : détermination des fractions polaire et dispersive de la tension superficielle des liquides à partir de l'angle de contact avec un solide n'ayant qu'une contribution de dispersion à son énergie de...
NF ISO 13472-1:2022 Acoustique - Mesurage in situ des propriétés d'absorption acoustique des revêtements de chaussées - Partie 1 : méthode de la surface étendue
XP X30-475*XP CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
NF X31-211:2012 Caractérisation des déchets - Essai de lixiviation d'un déchet solide initialement massif ou généré par un procédé de solidification
NF P98-831-3*NF EN 13036-3:2003 Road and airfield surface characteristics - Test methods - Part 3 : measurement of pavement surface horizontal drainability.
NF C93-621-8*NF EN 60444-8:2017 Measurement of quartz crystal unit parameters - Part 8 : Test fixture for surface mounted quartz crystal units
NF S74-532-1*NF EN 1149-1:2007 Protective clothing - Electrostatic properties - Part 1 : test method for measurement of surface resistivity.
NF EN 62631-3-2:2016 Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-2 : détermination des propriétés résistives (Méthodes en courant continu) - Résistance superficielle et résistivité superficielle
XP CEN/TS 15862:2012 Caractérisation des déchets - Essai de lixiviation de conformité - Essai de lixiviation en bâchée unique pour des monolithes avec un rapport liquide/ surface (L/A) fixe, pour des prises d'essai de dimensions minimales fixes
NF P98-245-1:1994 Tests relating to pavements. Spilling of a product on the surface of a layer of ciment concrete. Part 1 : measurement of the distribution of a liquid product.
NF E05-021:1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS). SURFACE TEXTURE : PROFILE METHOD ; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES. PART 1 : FILTERING AND GENERAL MEASUREMENT CONDITIONS.
NF EN 15758:2010 Conservation des biens culturels - Méthodes et instruments de mesure de la température de l'air et de la surface des objets
NF EN ISO 18757:2006 Céramiques techniques - Détermination de la surface spécifique (aire massique) des poudres céramiques par adsorption de gaz à l'aide de la méthode BET
NF EN 17694-1:2023 Hydrométrie - Exigences minimales de performance et modes opératoires d'essai pour les équipements de surveillance de l'eau - Dispositifs de mesure de l'écoulement - Partie 1 : instruments de mesure pour écoulements à surface libre
NF X11-622:1977 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. Various readings of the basic method.
NF C93-621-8:2005 Measurement of quartz crystal unit parameters - Part 8 : test fixture for surface mounted quartz crystal units.
NF C31-888-7:2003 Superconductivity - Part 7 : electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies.
NF EN 13036-1:2010 Caractéristiques de surface des routes et aérodromes - Méthodes d'essai - Partie 1 : mesurage de la profondeur de macrotexture de la surface d'un revêtement à l'aide d'une technique volumétrique à la tâche
NF C31-888-15*NF EN 61788-15:2012 Superconductivity - Part 15 : electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
NF C31-888-7*NF EN IEC 61788-7:2020 Superconductivity - Part 7 : electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
NF C31-888-7*NF EN 61788-7:2006 Superconductivity - Part 7 : electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
NF EN 14981:2007 Agents de surface - Détermination de la teneur en solvants à point d'ébullition élevé dans les détergents liquides par chromatographie en phase gazeuse
NF EN 623-4:2005 Céramiques techniques avancées - Céramiques monolithiques - Propriétés générales et texturales - Partie 4 : détermination de la rugosité de surface
NF C46-251-2*NF EN IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2 : measuring oxygen in gas utilizing high-temperature electrochemical sensors
NF EN IEC 61207-2:2019 Expression des qualités de fonctionnement des analyseurs de gaz - Partie 2 : mesure de l'oxygène contenu dans le gaz en utilisant des capteurs électrochimiques à haute température
NF C93-266-9*NF EN 60115-9:2005 Fixed resistors for use in electronic equipment - Part 9 : sectional specification - Fixed surface mount resistor networks with individually measurable resistors
NF EN 19694-1:2016 Émissions de sources fixes - Détermination des émissions de gaz à effet de serre (GES) dans les industries énergo-intensives - Partie 1 : aspects généraux
NF EN ISO 13565-1:1998 Spécification géométrique des produits (GPS) - État de surface : méthode du profil - Surfaces ayant des propriétés fonctionnelles différentes suivant les niveaux - Partie 1 : filtrage et conditions générales de mesurage
NF EN ISO 23157:2022 Détermination de la teneur en groupes silanol à la surface de la silice pyrogénée - Méthode par analyse chromatographique en phase gazeuse des gaz de réaction

Danish Standards Foundation, Measurement of Surface Energy of Solids

DS/EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
DS/EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
DS/EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
DS/EN 60444-8:2003 Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units
DS/ISO 13565-1:1997 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions
DS/EN 1149-1:2006 Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity
DS/EN 15758:2011 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
DS/EN 14981:2007 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
DS/EN ISO 3746:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
DS/EN ISO 13565-1/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions
DS/EN ISO 13565-1:1998 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions
DS/EN 50402/A1:2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
DS/EN 50402:2006 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
DS/EN 61788-7:2007 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
DS/ISO 19694-1:2021 Stationary source emissions – Determination of greenhouse gas emissions in energy-intensive industries – Part 1: General aspects

AENOR, Measurement of Surface Energy of Solids

UNE-EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
UNE-EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
UNE-ISO 9277:2009 Determination of the specific surface area of solids by gas adsorption using the BET method
UNE-EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.
UNE 55516:1989 SURFACE ACTIVE AGENTS. WASHING POWDERS. DETERMINATION OF APPARENT DENSITY. METHOD BY MEASURING THE MASS OF A GIVEN VOLUME.
UNE 55502:1989 SURFACE ACTIVE AGENTS. MEASUREMENT OF FOAMING POWER. MODIFIED ROSS-MILES METHOD
UNE 40242-1:1974 CARPETS. DETERMINATION OF MEASURED SURFACE PILE DENSITY AND MEASURED PILE FIBRE VOLUME RATIO.
UNE-EN 15758:2011 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
UNE-EN 14981:2007 Surface active agents. Determination of content of high boiling solvents in liquid detergents by GLC
UNE-EN ISO 13565-1:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS (ISO 13565-1:1996).
UNE-EN ISO 3746:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
UNE-EN 50402:2006 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
UNE-EN 50402:2006/A1:2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
UNE 55708/1C:1989 SURFACE ACTIVE AGENTS. DETERMINATION OF INTERFACIAL TENSION BY DRAWING UP LIQUID FILMS. ILLUSTRATED DESCRIPTION OF ITS DEVELOPMENT USING THE RING MEASUREMENT METHOD.

British Standards Institution (BSI), Measurement of Surface Energy of Solids

BS EN ISO 19403-2:2020 Paints and varnishes. Wettability - Determination of the surface free energy of solid surfaces by measuring the contact angle
BS EN 828:2013 Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface
BS EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Sheet goods
BS EN 1569:1999 Surfaces for sports areas - Determination of the behaviour under a rolling load
BS EN 828:1998 Adhesives. Wettability. Determination by measurement of contact angle and critical surface tension of solid surface
BS EN ISO 19403-5:2020 Paints and varnishes. Wettability - Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
BS EN ISO 19712-3:2022 Tracked Changes. Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
BS EN 1517:2000 Surfaces for sports areas - Determination of resistance to impact
BS EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
21/30419294 DC BS ISO 9277. Determination of the specific surface area of solids by gas adsorption. BET method.
BS ISO 9277:2022 Tracked Changes. Determination of the specific surface area of solids by gas adsorption. BET method
BS EN 61788-15:2011 Superconductivity. Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies
BS 7941-2:2000 Methods for measuring the skid resistance of pavement surfaces - Test method for measurement of surface skid resistance using the GripTester braked wheel fixed slip device
PD ISO/PAS 13473-6:2021 Characterization of pavement texture by use of surface profiles. Verification of the performance of laser profilometers used for pavement texture measurements
BS ISO 13472-1:2002 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Extended surface method
BS EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials. Determination of resistive properties (DC Methods). Surface resistance and surface resistivity
BS ISO 15239:2005 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
BS EN 1149-1:2006 Protective clothing - Electrostatic properties - Test method for measurement of surface resistivity
BS EN IEC 62885-8:2019 Surface cleaning appliances - Dry vacuum cleaners for commercial use. Methods for measuring the performance
BS EN 15216:2007 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates
BS EN ISO 13565-1:1998 Geometric Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Filtering and general measurement conditions
BS EN ISO 13565-1:1997 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Filtering and general measurement conditions
BS 6069-4.4:1993 Characterization of air quality. Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Performance characteristics of automated measuring methods
BS EN 60444-8:2003 Measurement of quartz crystal unit parameters - Test fixture for surface mounted quartz crystal units
BS EN 60444-8:2017 Measurement of quartz crystal unit parameters. Test fixture for surface mounted quartz crystal units
BS EN 61788-7:2002 Superconductivity - Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
BS EN 61788-7:2007 Superconductivity - Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
BS EN 140400:1997 Harmonized system of quality assessment for electronic components - Sectional specification:fixed low power surface mounting (SMD) resistors
BS EN 140400:2004 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed low power surface mount (SMD) resistors
BS ISO 13472-2:2010 Acoustics. Measurement of sound absorption properties of road surfaces in situ. Spot method for reflective surfaces
PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
BS EN IEC 61207-2:2019 Expression of performance of gas analyzers - Measuring oxygen in gas utilizing high-temperature electrochemical sensors
BS EN 60115-9:2004 Fixed resistors for use in electronic equipment - Sectional specification - Fixed surface mount resistor networks with individually measurable resistors
BS EN IEC 61788-7:2020 Superconductivity - Electronic characteristic measurements. Surface resistance of high-temperature superconductors at microwave frequencies
BS EN 61788-16:2013 Superconductivity. Electronic characteristic measurements. Power-dependent surface resistance of superconductors at microwave frequencies
BS EN IEC/ASTM 62885-7:2021+A1:2023 Surface cleaning appliances - Dry cleaning robots for household or similar use. Methods for measuring the performance
BS EN IEC/ASTM 62885-7:2021 Surface cleaning appliances. Dry-cleaning robots for household or similar use. Methods for measuring the performance
PAS 2424:2014 Quantitative surface test for the evaluation of residual antimicrobial ( bactericidal and/or yeasticidal) efficacy of liquid chemical disinfectan ts on hard non-porous surfaces. Test method
BS ISO 14701:2018 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
BS EN IEC 62885-4:2020 Surface cleaning appliances - Cordless dry vacuum cleaners for household or similar use. Methods for measuring the performance
BS EN IEC 62885-4:2020+A1:2023 Surface cleaning appliances - Cordless dry vacuum cleaners for household or similar use. Methods for measuring the performance
BS ISO 22581:2021 Surface chemical analysis. Near real-time information from the X-ray photoelectron spectroscopy survey scan. Rules for identification of, and correction for, surface contamination by carbon-containing compounds
BS IEC 60747-14-11:2021 Semiconductor devices - Semiconductor sensors. Test method of surface acoustic wave-based integrated sensors for measuring ultraviolet, illumination and temperature
19/30404099 DC BS EN IEC 62372. Nuclear instrumentation. Housed scintillators. Measurement methods of light output and intrinsic resolution
BS EN IEC/ASTM 62885-6:2019 Surface cleaning appliances. Wet hard floor cleaning appliances for household or similar use. Methods for measuring the performance
BS EN 140401:1997 Harmonized system of quality assessment for electronic components - Blank detail specification - Fixed low power non-wire wound surface mounting (SMD) resistors

International Organization for Standardization (ISO), Measurement of Surface Energy of Solids

ISO 19712-3:2022 Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes
ISO 19403-2:2017 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO/CD 19403-2:2023 Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO/DIS 19403-2:2023 Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO 19403-5:2017 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
ISO 19712-2:2007 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
ISO 11631:1998 Measurement of fluid flow - Methods of specifying flowmeter performance
ISO/CD 19403-5:2023 Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
ISO/DIS 19403-5:2023 Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
ISO 13472-1:2022 Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 1: Extended surface method
ISO 8769:1988 Reference sources for the calibration of surface contamination monitors; beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters
ISO 697:1975 Title missing - Legacy paper document
ISO 697:1981 Surface active agents; Washing powders; Determination of apparent density; Method by measuring the mass of a given volume
ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio
ISO 15239:2005 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
ISO/PAS 13473-6:2021 Characterization of pavement texture by use of surface profiles - Part 6: Verification of the performance of laser profilometers used for pavement texture measurements
ISO 14701:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness
ISO 13472-1:2002 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method
ISO 8769-2:1996 Reference sources for the calibration of surface contamination monitors - Part 2: Electrons of energy less than 0,15 MeV and photons of energy less than 1,5 MeV
ISO 14701:2011 Surface chemical analysis - X-ray photoelectron spectroscopy - Measurement of silicon oxide thickness
ISO 609:1996/Cor 1:1996 Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method
ISO 13565-1:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surface having stratified functional properties - Part 1: Filtering and general measurement conditions
ISO 13472-2:2010 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces
ISO 22581:2021 Surface chemical analysis — Near real-time information from the X-ray photoelectron spectroscopy survey scan — Rules for identification of, and correction for, surface contamination by carbon-containi
ISO 13565-1:1996/cor 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions; Technical Corrigendum 1
ISO 19694-1:2021 Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 1: General aspects
ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample

ES-UNE, Measurement of Surface Energy of Solids

UNE-EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
UNE-EN ISO 19403-2:2021 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
UNE-EN ISO 19403-5:2021 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
UNE-EN 60444-8:2017 Measurement of quartz crystal unit parameters - Part 8 : Test fixture for surface mounted quartz crystal units (Endorsed by Asociación Española de Normalización in May of 2017.)
UNE-EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (Endorsed by AENOR in April of 2016.)
UNE-EN 1149-1:2007 Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity
UNE-EN 623-4:2004 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness (Endorsed by AENOR in December of 2004.)
UNE-EN IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors (Endorsed by Asociación Española de Normalización in October of 2019.)
UNE-EN IEC 61788-7:2020 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies (Endorsed by Asociación Española de Normalización in June of 2020.)

American National Standards Institute （ANSI), Measurement of Surface Energy of Solids

ANSI/ICPA SS-1-2001 Performance Standard for Solid Surface Materials
ANSI/ASA S12.56-2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
ANSI/ASTM D2275:2001 Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface (10.01)

BE-NBN, Measurement of Surface Energy of Solids

NBN T 63-109-1982 Surface active agents - Washing powders - Determination of apparent density-Method by measuring the mass of a given volume
NBN M 02-010-1979 Determination of the gross calorific value of a solid fuel and cal-culation of its net calorific value

Japanese Industrial Standards Committee (JISC), Measurement of Surface Energy of Solids

JIS Z 8830:2001 Determination of the specific surface area of powders (solids) by gas adsorption method
JIS Z 8830:2013 Determination of the specific surface area of powders (solids) by gas adsorption -- BET method
JIS Z 8830 ERRATUM 1:2002 Determination of the specific surface area of powders (solids) by gas adsorption method (Erratum 1)
JIS C 2139-3-2:2018 Dielectric and resistive properties of solid insulating materials -- Part 3-2: Determination of resistive properties (DC methods) -- Surface resistance and surface resistivity
JIS C 2139:2008 Solid electrical insulating materials -- Methods for the determination of volume resistivity and surface resistivity
JIS B 0671-1:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions
JIS B 0671-1 AMD 1:2022 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions (Amendment 1)
JIS H 7307:2005 Superconductivity -- Part 7: Electoronic characteristic measurements -- Surface resistance of superconductors at microwave frequencies
JIS H 7307:2010 Superconductivity -- Part 7: Electronic characteristic measurements -- Surface resistance of superconductors at microwave frequencies
JIS C 5201-9:2006 Fixed resistors for use in electronic equipment -- Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors
JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
JIS A 1440:1997 Laboratory measurement of the reduction of transmitted tapping machine impact sound by floor coverings on a solid standard floor

Lithuanian Standards Office , Measurement of Surface Energy of Solids

LST EN 828-2000 Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surface
LST ISO 696:1997 Surface active agents. Measurement of foaming power. Modified Ross-Miles method
LST HD 429 S1-2002 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980)
LST EN 1149-1-2006 Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity
LST EN 15758-2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
LST EN 14981-2006 Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
LST EN 60444-8-2004 Measurement of quartz crystal unit parameters. Part 8: Test fixture for surface mounted quartz crystal units (IEC 60444-8:2003)
LST EN ISO 3746:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
LST EN 50402-2005/A1-2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
LST EN ISO 13565-1:2001 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996)

Korean Agency for Technology and Standards (KATS), Measurement of Surface Energy of Solids

KS A 0094-2014(2019) Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS C IEC 62631-3-2:2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS C 7105-2007 Plasma display panels - Measuring method of glass surface temperature on PDP module
KS B ISO 10774-2005(2010) Solid fuelled heaters－Test method for determining allowable clearances from combustible surfaces
KS C 6111-3-2007 Electronic characteristic measurements－Intrinsic surface impedance of high-TC superconductor films at microwave frequencies
KS E ISO 15239:2007 Solid mineral fuels－Evaluation of the measurement performance of on-line analysers
KS F 2375-2016 Testing method for measuring surface frictional properties using the British Pendulum Tester
KS A ISO 7503-1-2003(2018) Evaluation of surface contamination－Part 1：Beta-emitters(maximum beta energy greater than 0.15 MeV) and alpha-emitters
KS I ISO 3746:2016 Acoustics－Determination of sound power levels of noise sources using sound pressure－Survey method using an enveloping measurement surface over a reflecting plane
KS I ISO 3746:2022 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure —Survey method using an enveloping measurement surface over a reflecting plane
KS C IEC 62631-3-2-2017(2022) Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS C IEC 62885-3:2018 Surface cleaning appliances — Part 3: Wet carpet cleaning appliances — Methods for measuring the performance
KS C IEC 62885-3-2023 Surface cleaning equipment Part 3: Methods of measuring performance of wet carpet cleaning equipment
KS C 6111-3-2007(2022) Electronic characteristic measurements－Intrinsic surface impedance of high-TC superconductor films at microwave frequencies
KS A IEC 61137:2003 Radiation protection instrumentation-Installed personnel surface contamination monitoring assembly-Low energy X and gamma emitters
KS C IEC 60115-9:2006 Fixed resistors for use in electronic equipment－Part 9：Sectional specification－Fixed surface mount resistor networks with individually measurable resistors
KS F 2234-2016 Measuring method for the mass per unit volume(density) and the mass per unit of surface area of polystyrene composite wood wool cement boards
KS C IEC 60115-9-2006(2016) Fixed resistors for use in electronic equipment－Part 9：Sectional specification－Fixed surface mount resistor networks with individually measurable resistors
KS C IEC 60115-9-2006(2021) Fixed resistors for use in electronic equipment－Part 9：Sectional specification－Fixed surface mount resistor networks with individually measurable resistors
KS C IEC 62885-2:2018 Surface cleaning appliances — Part 2: Dry vacuum cleaners for household or similar use — Methods for measuring the performance
KS C IEC 62885-2-2023 Surface cleaning equipment Part 2: Methods for measuring the performance of dry vacuum cleaners for household or similar purposes

Standard Association of Australia （SAA）, Measurement of Surface Energy of Solids

IEC 62631-3-2:2023 Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
IEC 62631-3-2:2023 CMV Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
AS 2360.8.1:2007 Hydrometry - Measurement of free surface flow in closed conduits - Methods
AS 5337:2019 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane
AS 3558.24:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to hot liquids of the surface of sinks

Professional Standard - Nuclear Industry, Measurement of Surface Energy of Solids

EJ/T 709-1992 Stationary Low Energy X and Gamma Emitter Personal Surface Contamination Monitor

International Electrotechnical Commission (IEC), Measurement of Surface Energy of Solids

IEC 62631-3-2:2015 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity
IEC 61137:1992 Radiation protection instrumentation; installed personnel surface contamination monitoring assemblies; low energy X and gamma emitters
IEC 60444-8:2003 Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units
IEC 60444-8:2016 Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units
IEC 61788-7:2002 Superconductivity - Part 7: Electronic characteristic measurements; Surface resistance of superconductors at microwave frequencies
IEC 61788-7:2006 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
IEC 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
IEC 61207-2:2019 Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors
IEC 60115-9:2003 Fixed resistors for use in electronic equipment - Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors
IEC 62885-6:2018 Surface cleaning appliances - Part 2: Dry vacuum cleaners for household or similar use - Methods for measuring the performance
IEC 62885-2:2016 Surface cleaning appliances - Part 2: Dry vacuum cleaners for household or similar use - Methods for measuring the performance
IEC 61788-7:2020 RLV Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies
IEC 61788-7:2020 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies

Professional Standard - Machinery, Measurement of Surface Energy of Solids

JB/T 3282-1999 Test methods for determining the relative resistance of insulating meterials to breardown by surface discharges

TR-TSE, Measurement of Surface Energy of Solids

TS 871-1971 VOCAEULARY OF TERMS AND SYMEOLS USED ?N CONNECTION WITH THE MEASUREMENT OF LIQUID FLOW WITH A FREE SURFACE

RO-ASRO, Measurement of Surface Energy of Solids

STAS 13084-1992 Tobacco. Determination of surface unity mass of foilar limb
STAS 11654-1980 High capacity belt conveyers for surface raining FIXED BELT AND FLITTING TRANSOMST ypification
STAS 10369-1975 SOLID ELECTRICAL INSULATING MATERIALS Test methods for determining the relative resistance to breakdown by surface discharges
STAS 6069-1980 MIXTURES SEPARATION OF SOLID AND LIQUID PHASES BY FILTRATION Glossary of terms and measuring units

IN-BIS, Measurement of Surface Energy of Solids

American Society for Testing and Materials (ASTM), Measurement of Surface Energy of Solids

ASTM D7490-13(2022) Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM D7490-13 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM D7490-08 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM D6393-99(2006) Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D6393-99 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D6393/D6393M-21 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM C1127/C1127M-15(2023) Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM C1127-01 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM C1471/C1471M-05(2021) Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM C1471/C1471M-22 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM C1127-01(2009) Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM C1127-95 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM C957-93(1998) Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM C1127/C1127M-15 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM C957/C957M-14 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM C957/C957M-15 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM C957/C957M-17 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM E2340/E2340M-11 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E2340/E2340M-11(2021) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM C1471-05 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM F1375-92(1999) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1375-92(2020) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D6104-97 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
ASTM D6104-97(2003) Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
ASTM E2340/E2340M-11e1 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E2340/E2340M-11(2015) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM D8325-20 Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements
ASTM E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM C1279-94 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
ASTM C1279-00 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
ASTM C1279-00e1 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
ASTM C1279-13(2019) Standard test method for nondestructive photoelastic measurement of edge and surface stresses in annealed, heat-strengthened, and fully tempered flat glasses
ASTM F2607-06e1 Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
ASTM F2607-06 Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
ASTM F2607-08 Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
ASTM F2607-08(2014) Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
ASTM E684-95(2000) Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter Depth Profiling of Solid Surfaces
ASTM E684-04 Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter Depth Profiling of Solid Surfaces
ASTM F2607-08(2022) Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners

YU-JUS, Measurement of Surface Energy of Solids

JUS C.A6.022-1982 Volumetric method for determining tin coating mass (lodine method)
JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Measurement of Surface Energy of Solids

GB/T 22689-2008 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
GB/T 11986-1989 Surface active agents--Powders and granules--Mesurement of the angle of repose
GB/T 14056-1993 Evaluation of surface contamination.Part 1:Beta-emitters(maximum beta energy greater than 0.15MeV)and alpha-emitters
GB/T 22319.8-2008 Measurement of quartz crystal unit parameters.Part 8:Test fixture for surface mounted quartz crystal units
GB/T 12128.2-1999 Reference sources for the calibration of surface contamination monitors Part 2: Electrons of energy less than 0.15MeV and photons of energy less than 1.5MeV
GB/T 43023-2023 Nonlinear Measurement Guidelines for RF Surface Acoustic Wave (SAW) Devices and Bulk Acoustic Wave (BAW) Devices
GB/T 25188-2010 Thickness measurements for ultrathin silicon oxide layers on silicon wafers X-ray photoelectron spectroscopy
GB/T 42310-2023 Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method
GB/T 19875-2005 Mechanical vibration and shock.Vibration of stationary structures.Specific requirements for quality management in measurement and evaluation of vibration
GB/T 29849-2013 Test method for measuring surface metallic contamination of silicon materials used for photovoltaic applications by inductively coupled plasma mass spectrometry

RU-GOST R, Measurement of Surface Energy of Solids

GOST 33096-2014 Goods of household chemistry. Method for determination of efficiency of rust removal from solid surface
GOST R 8.667-2009 State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion, specific energy of combustion and volumetric energy of combustion (combustion calorimeters)
GOST R ISO 3746-2013 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey methods using an enveloping measurement surface over a reflecting plane
GOST R 50499-1993 Solid electrical insulating materials. Methods of test for volume resistivity and surface resistivity
GOST R 8.826-2013 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the amplitude of the ultrasonic displacement and the particle velocity of the surface of the solid bodies
GOST R 54963-2012 Reinforcing alkali-resistant glass fibre meshes for building faces. Method for determination of the mechanical properties
GOST R 8.681-2009 State system for ensuring the uniformity of measurements. State verification schedule for measuring of moisture content of firm and loose materials
GOST R 8.735.0-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in liquid and solid media. Basic principles
GOST 8.590-2009 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the angle of rotation of the plane of polarization
GOST 8.181-1976 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring of evolvent surfaces's parameters
GOST R 8.678-2009 State system for ensuring the uniformity of measurements. Forms of conformity assessment of technical systems and devices with measuring function the specified requirements
GOST 8.171-1975 State system of ensuring the uniformity of measurements. Actual measures of the surface density for radiation thickness gauges. General specifications
GOST R 8.649-2008 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the content of components in solid and liquid mediums in spectral range from 0,19 to 1,0 mu
GOST R 8.700-2010 State system for ensuring the uniformity of measurements. Method of surface roughness effective height measurements by means of scanning probe atomic force microscope

KR-KS, Measurement of Surface Energy of Solids

KS C IEC 62631-3-2-2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS M ISO 697-2007(2023) Surface active agents－Washing powders－Determination of apparent density－Method by measuring the mass of a given volume
KS I ISO 3746-2022 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure —Survey method using an enveloping measurement surface over a reflecting plane
KS C IEC 60444-8-2016 Measurement of quartz crystal unit parameters ― Part 8: Test fixture for surface mounted quartz crystal units
KS C IEC 62885-3-2018 Surface cleaning appliances — Part 3: Wet carpet cleaning appliances — Methods for measuring the performance
KS C IEC 62885-2-2018 Surface cleaning appliances — Part 2: Dry vacuum cleaners for household or similar use — Methods for measuring the performance

CO-ICONTEC, Measurement of Surface Energy of Solids

ICONTEC 3224-1991

TH-TISI, Measurement of Surface Energy of Solids

TIS 1759-1999 Surface active agents.powders and granules.measurement of the angle of repose

CZ-CSN, Measurement of Surface Energy of Solids

CSN IEC 93:1993 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
CSN CEN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method

AT-ON, Measurement of Surface Energy of Solids

ONORM ISO 697:1986 Surface active agents; washing powders; determination ofapparent density; method by measuring the mass ofa given volume

ZA-SANS, Measurement of Surface Energy of Solids

SANS 15239:2006 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers

Guangdong Provincial Standard of the People's Republic of China, Measurement of Surface Energy of Solids

DB44/T 1232-2013 Test Method for Determination of Surface Tension of Solid Coatings, Substrates, and Pigments Contact Angle Method

Association of German Mechanical Engineers, Measurement of Surface Energy of Solids

VDI 3860 Blatt 3-2011 Measurement of landfill gas - Measurement of surface emissions using the flame ionisation detector (FID)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Measurement of Surface Energy of Solids

GB/T 22586-2018 Electronic characteristic measurements—Surface resistance of superconductors at microwave frequencies

European Committee for Electrotechnical Standardization（CENELEC）, Measurement of Surface Energy of Solids

EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
EN 60444-8:2017 Measurement of quartz crystal unit parameters - Part 8 : Test fixture for surface mounted quartz crystal units
EN 60444-8:2003 Measurement of quartz crystal unit parameters Part 8: Test fixture for surface mounted quartz crystal units
EN 61788-7:2006 Superconductivity Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
EN 62761:2014 Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF)
EN IEC 61788-7:2020 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies

DE-VDA, Measurement of Surface Energy of Solids

VDA 280-3-2001 Colorimetry for motor vehicles - Colour measurement of automotive paint finishes - Solid paints
VDA 675-240-2014

Group Standards of the People's Republic of China, Measurement of Surface Energy of Solids

T/GAIA 017-2022 Determination of fluorine content in the surface coating of aluminum and aluminum alloys— Scanning electron microscope and energy dispersive spectrometer method
T/CASAS 032-2023 Test method for the content of metal elements on the surface of silicon carbide wafer—Inductively coupled plasma mass spectrometry

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Measurement of Surface Energy of Solids

ASHRAE 105-2014 Standard Methods of Measuring@ Expressing and Comparing Building Energy Performance and Greenhouse Gas Emissions

SE-SIS, Measurement of Surface Energy of Solids

SIS SS IEC 343:1982 Recommended test methods for determining the relative resistance of insulating materials to break-down by surface discharges
SIS SS 64 12 50-1981 Measurement in building - Laser direction and laser surface indicating device - Function and testing

Military Standard of the People's Republic of China-General Armament Department, Measurement of Surface Energy of Solids

GJB 772.305-1991 Explosives test methods Determination of polygonal index of detonation products of solid explosives Free surface velocity method

国家市场监督管理总局、中国国家标准化管理委员会, Measurement of Surface Energy of Solids

GB/T 39145-2020 Test method for the content of surface metal elements on silicon wafers—Inductively coupled plasma mass spectrometry

PT-IPQ, Measurement of Surface Energy of Solids

NP 3757-1989 SOLID FUELS Cokes Determination of true relative density, apparent relative density and porosity

CENELEC - European Committee for Electrotechnical Standardization, Measurement of Surface Energy of Solids

EN 61788-7:2002 Superconductivity Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies

未注明发布机构, Measurement of Surface Energy of Solids

BS EN ISO 13565-1:1998(1999) Geometric Product Specifications (GPS) — Surface texture : Profile method — Surfaces having stratified functional properties — Part 1 : Filtering and general measurement conditions
BS EN 623-4:2004(2009) Advanced technical ceramics — Monolithic ceramics — General and textural properties — Part 4 : Determination of surface roughness

Professional Standard - Aerospace, Measurement of Surface Energy of Solids

QJ 2220.2-1992 Test methods for electrical insulation properties of coatings Test methods for insulation resistance, surface resistivity, and volume resistivity

CU-NC, Measurement of Surface Energy of Solids

NC 90-18-04-1988 Metrological Assurance. Radiometers for Measuring Alpha-Radiation Emiting Substances in Surface. Methods and Means of Verification

VN-TCVN, Measurement of Surface Energy of Solids

TCVN 7334-2004 Mechanical vibration and shock.Vibration of stationary structures.Speccific requirements for quality management in measurement and evaluation of vibration

PH-BPS, Measurement of Surface Energy of Solids

PNS ISO 19694-1:2021 Stationary source emissions - Determination of greenhouse gas emissions in energy-intensive industries - Part 1: General aspects