ZH
RU
ES

What does the impact tester measure?

What does the impact tester measure?, Total:497 items.

In the international standard classification, What does the impact tester measure? involves: Packaging materials and accessories, Equipment for the rubber and plastics industries, Testing of metals, Plastics, Mechanical testing, Wood, sawlogs and sawn timber, Footwear, Vibrations, shock and vibration measurements, Protection of and in buildings, Components for electrical equipment, Electromechanical components for electronic and telecommunications equipment, Electrical accessories, Fibre optic communications, Equipment for entertainment, Environmental testing, Surface treatment and coating, Freight distribution of goods, Reinforced plastics, Rubber and plastics products, Applications of information technology, Structure and structure elements, Vibration and shock with respect to human beings, Hand-held tools, Gas and steam turbines. Steam engines, Soil quality. Pedology, Construction materials, Paints and varnishes, Electricity. Magnetism. Electrical and magnetic measurements, Mining equipment, Road vehicles in general, Wood-based panels, Linear and angular measurements, Packaging and distribution of goods in general, Equipment for the chemical industry, Products of the textile industry, Welding, brazing and soldering, Aerospace fluid systems and components, Insulating materials, Sports equipment and facilities, Electrical and electronic testing, Electrical engineering in general, Glass, Refractories, Software development and system documentation, Protective equipment, Motor cycles and mopeds, Power transmission and distribution networks, Transformers. Reactors, Semi-manufactures of timber, Non-textile floor coverings, Mining and quarrying, Ceramics, Acoustics and acoustic measurements, Semiconductor devices, Materials for aerospace construction, Pipeline components and pipelines, Road vehicle systems, Aerospace electric equipment and systems, Protection against fire, Magnetic materials, Road engineering, Structures of buildings.

American Society for Testing and Materials (ASTM), What does the impact tester measure?

ASTM D3332-99(2004) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3332-99 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3332-99(2010) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3332-99(2023) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3332-99(2016) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM F1976-06 Standard Test Method for Impact Attenuation Properties of Athletic Shoes Using an Impact Test
ASTM D5277-92(1997) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D5277-92(2008) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D5277-22 Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D5277-92(2015) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D5487-16 Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D5487-98(2008) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D5420-16 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5874-02(2007) Standard Test Method for Determination of the Impact Value (IV) of a Soil
ASTM D5874-02 Standard Test Method for Determination of the Impact Value (IV) of a Soil
ASTM D5874-95 Standard Test Method for Determination of the Impact Value (IV) of a Soil
ASTM F736-95(2006) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D6905-03 Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6905-03(2008) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6905-03(2012) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D5874-16 Standard Test Methods for Determination of the Impact Value (IV) of a Soil
ASTM D6643-01(2011) Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
ASTM E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM F1976-99 Standard Test Method for Cushioning Properties of Athletic Shoes Using an Impact Test
ASTM F736-95(2011) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM E492-04 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
ASTM E492-09 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
ASTM D1822-21 Standard Test Method for Determining the Tensile-Impact Resistance of Plastics
ASTM D6643-01(2006) Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
ASTM D6643-01 Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
ASTM D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM C131-06 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C131/C131M-14 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C535-16 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM D5628-96(2001)e1 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM E23-07ae1 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E23-07a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E23-07 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM D5628-07 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5628-06 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D2794-93(2004) Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D2794-92 Standard Test Method for Resistence of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D2794-93(1999)e1 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D5487-16(2022) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D2794-93(2019) Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D6110-17 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-06 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-04e1 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-05a Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-18 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D256-02 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-02e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D1790-08 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM D256-23 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM C1870-18 Standard Test Method for Determination of Impact Diameter from Falling Ball on Ceramic Tile
ASTM D256-23e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-10e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D6110-10 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D2794-93(2010) Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D5882-07 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
ASTM D6395-99 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
ASTM C535-03 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C535-03e1 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C535-01 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C535-96e1 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C535-12 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C535-09 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM D256-05a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-05 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-06 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-06a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-03 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-04 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM G73-10(2021) Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM G86-98a Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
ASTM A596/A596M-95(2004) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
ASTM A596/A596M-21 Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Point by Point (Ballistic) Method and Ring Specimens
ASTM A596/A596M-95(2004)e1 Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
ASTM A596/A596M-95(2009)e1 Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
ASTM D1822-99 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
ASTM D1709-04 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-03 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1790-02 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM D1790-99 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM D1790-14 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM D6110-02 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-04 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-97 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-08 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-05 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM C1747/C1747M-11 Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
ASTM A596/A596M-14 Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
ASTM C131/C131M-20 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM D4495-00 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM F2634-10 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM C1525-04(2009) Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching

Danish Standards Foundation, What does the impact tester measure?

DS/EN ISO 13802:2006 Plastics – Verification of pendulum impact-testing machines – Charpy, Izod and tensile impact-testing
DS/EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test
DS/EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
DS/EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
DS/EN ISO 148-2:2009 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
DS/EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
DS/EN ISO 20567-2:2007 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
DS/EN ISO 20567-3:2013 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body
DS/EN ISO 13090-1:1999 Mechanical vibration and shock - Guidance of safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock
DS/EN ISO 179-2/A1:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data
DS/EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
DS/EN ISO 20567-1:2007 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
DS/EN 14066:2013 Natural stone test methods - Determination of resistance to ageing by thermal shock
DS/EN 14617-9:2005 Agglomerated stone - Test methods - Part 9: Determination of impact resistance
DS/EN 60255-21-2:1996 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 2: Shock and bump tests
DS/EN 13696:2009 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
DS/EN 846-13:2001 Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings

European Committee for Standardization (CEN), What does the impact tester measure?

prEN ISO 13802 rev Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
EN 10054-2:1992 Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
EN 10045-1:1990 Metal Products, Mechanical Tests, Charpy Impact Tests, Test Specimens, Testing Conditions
EN ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01)
EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)
EN ISO 4532:2022 Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test (ISO 4532:1991)
EN 10045-2:1992 Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
EN ISO 148-2:2016 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016)
EN ISO 13090-1:1998 Mechanical Vibration and Shock - Guidance on Safety Aspects of Tests and Experiments with People - Part 1: Exposure to Whole-Body Mechanical Vibration and Repeated Shock ISO 13090-1:1998
EN ISO 179-1:2023 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2023)
prEN ISO 148-2 rev Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
EN ISO 6603-1:1996 Plastics - Determination of Multi-Axial Impact Behaviour of Rigid Plastics - Part 1: Falling Dart Method
EN ISO 6603-2:1996 Plastics - Determination of Multi-Axial Impact Behaviour of Rigid Plastics - Part 2: Instrumented Puncture Test
FprEN ISO 179-1 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO/FDIS 179-1:2023)
EN ISO 20567-2:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
FprEN ISO 6603-2 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO/FDIS 6603-2:2023)
prEN ISO 148-3 rev Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
prEN ISO 20567-2 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO/DIS 20567-2:2022)
EN ISO 6603-1:2000 Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 1: Non-Instrumented Impact Testing ISO 6603-1:2000
prEN 2003-3-1976 Test methods for steel products; part 3: calibration of pendulum impact testing machines; aerospace series
EN ISO 179-2:1999 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997)
EN 14617-9:2005 Agglomerated stone - Test methods - Part 9: Determination of impact resistance
EN 13696:2008 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
EN ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
EN 14066:2003 Natural Stone Test Methods - Determination of Resistance to Ageing by Thermal Shock
EN 3841-507:2004 Aerospace series - Circuit breakers - Test methods - Part 507: Mechanical shocks
EN ISO 179-1:2000 Plastics - Determination of Charpy Impact Properties - Part 1: Non-Instrumented Impact Test ISO 179-1:2000 + A1:2005; Includes amendment A1:2005

International Organization for Standardization (ISO), What does the impact tester measure?

ISO/CD 13802 Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 13802:1999 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
ISO 7626-5:1994 Vibration and shock - Experimental determination of mechanical mobility - Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
ISO/R 442:1965 Verification of pendulum impact testing machines for testing steels
ISO 4532:1991 Vitreous and porcelain enamels; determination of the resistance of enamelled articles to impact; pistol test
ISO 13802:1999/cor 1:2000 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing; Technical Corrigendum 1
ISO/FDIS 179-1 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
ISO 179-2:1997/Amd 1:2011 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data
ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
ISO 148-2:2016 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
ISO 7626-5:2019 Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
ISO 179-1:2000 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 20567-2:2023 Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body
ISO 148-2:1998 Metallic materials - Charpy pendulum impact test - Part 2: Verification of test machines
ISO 13090-1:1998 Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock
ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers
ISO 179-2:1997/cor 1:1998 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test; Technical Corrigendum 1
ISO 179-1:2000/Amd 1:2005 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test; Amendment 1
ISO 6487:1980 Road vehicles — Techniques of measurement in impact tests — Instrumentation
ISO 3784:1976 Road vehicles; Measurement of impact velocity in collision tests
ISO 20567-2:2005 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing
ISO 20567-2:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
ISO 20567-3:2012 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body
ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
ISO 6487:2015/Amd 1:2017 Road vehicles — Measurement techniques in impact tests — Instrumentation — Amendment 1
ISO 148-3:2008 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines

Association Francaise de Normalisation, What does the impact tester measure?

NF T51-902*NF EN ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
NF T51-902:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing.
NF T51-035-1*NF EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1 : non-instrumented impact test
NF A03-012:1992 Metallic materials. Charpy impact test. Part 2 : verification of the testing machine (pendulum impact).
NF S54-205*NF EN 1177+AC:2019 Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
NF T51-035-2*NF EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2 : instrumented impact test
NF C93-400-7-2*NF EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2 : impact Tests (free connectors)- Test 7b : mechanical strength impact
NF A03-011-2:2009 Metallic materials - Charpy pendulum impact test - Part 2 : verification of testing machines.
NF R10-212:2004 Road vehicles - Measurement techniques in impact tests - Instrumentation.
NF R10-212*NF ISO 6487:2015 Road vehicles - Measurement techniques in impact tests - Instrumentation
NF A03-011-2*NF EN ISO 148-2:2017 Metallic materials - Charpy pendulum impact test - Part 2 : verification of testing machines
NF E90-405-1*NF EN ISO 13090-1:1999 Mechanical vibration and shock. Guidance on safety aspects of tests and experiments with people. Part 1 : exposure to whole-body mechanical vibration and repeated shock.
NF T30-905-2*NF EN ISO 20567-2:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2 : single-impact test with a guided impact body
NF EN ISO 20567-2:2017 Peintures et vernis - Détermination de la résistance des revêtements aux impacts de cailloux - Partie 2 : essai de choc simple par corps percutant guidé
NF EN ISO 20567-3:2013 Peintures et vernis - Détermination de la résistance des revêtements aux impacts de cailloux - Partie 3 : essai de choc simple par corps percutant en vol libre
NF T70-500:2007 Energetic materials for defense - Safety, vulnerability - Impact sensitivity - BAM impactor test
NF R10-212:1988 ROAD VEHICLES. MEASUREMENT TECHNIQUES IN IMPACT TESTS. INSTRUMENTATION.
NF EN ISO 13090-1:1999 Vibrations et chocs mécaniques - Lignes directrices concernant les aspects de sécurité des essais et des expérimentations réalisées sur des sujets humains - Partie 1 : exposition de l'ensemble du corps aux vibrations mécaniques et aux chocs ré...
NF A03-011-3:2009 Metallic materials - Charpy pendulum impact test - Part 3 : preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines.
NF A03-011-3*NF EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3 : preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
NF T30-905-2:2007 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2 : single-impact test with a guided impact body.
NF EN ISO 6603-1:2000 Plastiques - Détermination du comportement des plastiques rigides perforés sous l'effet d'un choc - Partie 1 : essais de choc non instrumentés
NF T30-905-1*NF EN ISO 20567-1:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1 : multi-impact testing
NF EN ISO 20567-1:2017 Peintures et vernis - Détermination de la résistance des revêtements aux impacts de cailloux - Partie 1 : essais de chocs multiples
NF C41-108*NF EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2 : requirements for software for tests with impulse voltages and currents
NF T51-035-2/A1:2012 Plastics - Determination of Charpy impact properties - Part 2 : instrumented impact test - Amendment 1 : précision data.
NF S74-538-1:1998 Motorcyclists' protective clothing against mechanical impact. Part 1 : requirements and test methods for impact protectors.
NF C45-204-2*NF EN 60255-21-2:1998 Electrical relays. Part 21 : vibration, shock, bump and seismic tests on measuring relays and protection equipment. Section 2 : shock and bump tests.
NF B10-602-9*NF EN 14617-9:2005 Agglomerated stone - Test methods - Part 9 : determination of impact resistance
NF ISO 6487:2015 Véhicules routiers - Techniques de mesurage lors des essais de chocs - Instrumentation
NF EN ISO 4532:2022 Emaux vitrifiés - Détermination de la résistance au choc des pièces émaillées - Essai au pistolet
NF T30-905-3*NF EN ISO 20567-3:2013 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3 : single-impact test with a free-flying impact body
NF R10-212/A1*NF ISO 6487/A1:2018 Road vehicles - Measurement techniques in impact tests - Instrumentation - Amendment 1
NF EN 13696:2009 Planchers en bois - Méthodes d'essai pour déterminer l'élasticité et la résistance à l'abrasion et la résistance au choc
NF EN 14066:2013 Méthodes d'essai pour les pierres naturelles - Détermination de la résistance au vieillissement accéléré par choc thermique
NF C93-537-3-6*NF EN 50289-3-6:2001 Communication cables - Specifications for test methods - Part 3-6 : mechanical test methods - Impact resistance of the cable
NF B51-020-11*NF ISO 13061-11:2018 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 11 : determination of resistance to impact indentation
NF B51-020-10*NF ISO 13061-10:2018 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 10 : determination of impact bending strength
NF T51-116-1*NF EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing
NF T54-110:1971 Plastics. Thin sheets. Determination of pliability limit temperature.(looped test piece impact test).
NF A91-234*NF ISO 14188:2012 Metallic and other inorganic coatings - Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
NF C20-731*NF EN 60068-2-31:2008 Environmental testing - Part 2-31 : tests - Test Ec : rough handling shocks, primarily for equipment-type specimens

未注明发布机构, What does the impact tester measure?

BS EN ISO 13802:2015(2017) Plastics — Verification of pendulum impact - testing machines — Charpy, Izod and tensile impact - testing
DIN EN ISO 179-1:2001 Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact testing
BS 131-4:1972(2000) Methods for notched bar tests — Part 4 : Calibration of Izod pendulum impact testing machines for metals
BS EN 60255-21-2:1996(1999) Electrical relays — Part 21 : Vibration, shock, bump and seismic tests on measuring relays and protection equipment — Section 2 : Shock and bump tests
AS/NZS 2512.3.1:2007

AT-ON, What does the impact tester measure?

ONORM E 1358-1977
ONORM EN 10045-2-1993 Metalhc matenals - Charpy impact test - Part 2: Verif ication of the testing machine (pendulum impact)
ONORM M 7861 Teil.3-1987 Testing of welded joints in thermoplastics; impact tensile test, short time welding coefficient

ZA-SANS, What does the impact tester measure?

SANS 42:1965 Verification of pendulum impact testing machines for testing steels

British Standards Institution (BSI), What does the impact tester measure?

BS EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Non-instrumented impact test
BS EN 1177:2018 Impact attenuating playground surfacing. Methods of test for determination of impact attenuation
ISO 179-1:2023 Plastics. Determination of Charpy impact properties - Non-instrumented impact test
BS EN ISO 179-2:2020 Plastics. Determination of Charpy impact properties - Instrumented impact test
BS EN 60512-7-2:2012 Connectors for electronic equipment. Tests and measurements. Impact tests (free connectors). Test 7b. Mechanical strength impact
22/30444347 DC BS EN 1177 AMD1. Impact attenuating playground surfacing. Methods of test for determination of impact attenuation
BS EN ISO 179-1:2001 Plastics - Determination of Charpy impact properties - Non-instrumented impact test
BS EN ISO 148-2:2009 Metallic materials. Charpy pendulum impact test. Verification of testing machines
BS EN ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Verification of testing machines
BS EN 10045-2:1993(1999) Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
BS EN ISO 28927-10:2011 Hand-held portable power tools. Test methods for evaluation of vibration emission. Percussive drills, hammers and breakers
BS 131-4:1972 Notched bar tests - Calibration of pendulum impact testing machines for metals
BS EN ISO 148-2:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Verification of testing machines
22/30458394 DC BS EN 63461 Ed.1.0. Pelton hydraulic turbines. Model acceptance tests
BS EN ISO 6603-1:2000 Plastics - Determination of multi-axial impact behaviour of rigid plastics - Non-instrumented impact testing
BS 812-112:1990 Testing aggregates - Method for determination of aggregate impact value (AIV)
BS ISO 20567-2:2005 Paints and varnishes - Determination of stone-chip resistance of coatings - Single-impact test with a guided impact body
BS EN ISO 148-3:2009 Metallic materials. Charpy pendulum impact test. Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
BS EN ISO 148-3:2008 Metallic materials - Charpy pendulum impact test - Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
BS EN ISO 20567-2:2005 Paints and varnishes - Determination of stone-chip resistance of coatings - Single-impact test with a guided impact body
BS EN ISO 20567-2:2017 Paints and varnishes. Determination of stone-chip resistance of coatings. Single-impact test with a guided impact body
22/30449754 DC BS EN ISO 179-1. Plastics. Determination of Charpy impact properties. Part 1. Non-instrumented impact test
BS EN ISO 13090-1:1998 Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Exposure to whole-body mechanical vibration and repeated shock
BS ISO 7626-5:2019 Mechanical vibration and shock. Experimental determination of mechanical mobility - Measurements using impact excitation with an exciter which is not attached to the structure
BS EN ISO 6603-2:2000 Plastics. Determination of multi-axial impact behaviour of rigid plastics. Instrumented puncture testing
BS 2M 53:1997 Aircraft. Fluid systems. Thermal shock testing of piping and fittings
BS EN ISO 20567-3:2012 Paints and varnishes. Determination of stone-chip resistance of coatings. Single-impact test with a free-flying impact body
22/30458739 DC BS EN ISO 20567-2. Paints and varnishes. Determination of stone-chip resistance of coatings - Part 2. Single-impact test with a guided impact body
BS ISO 8721:2018 Road vehicles. Measurement techniques in impact tests. Optical instrumentation
BS ISO 6487:2015+A1:2017 Road vehicles. Measurement techniques in impact tests. Instrumentation
BS EN ISO 148-3:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
BS EN 13696:2008 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
BS EN 13696:2008(2009) Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
BS EN 60749-16:2003 Semiconductor devices - Mechanical and climatic test methods - Particle impact noise detection (PIND)
BS ISO 20567-1:2005 Paints and varnishes - Determination of stone-chip resistance of coatings - Multi-impact testing
BS EN 1621-1:2012 Motorcyclists' protective clothing against mechanical impact. Motorcyclists' limb joint impact protectors. Requirements and test methods
BS ISO 7626-2:2015 Mechanical vibration and shock. Experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter
BS 131-7:1998 Notched bar tests - Specification for verification of the test machine used for precision determination of Charpy V-notch impact energies for metals
BS EN 12697-30:2012 Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation by impact compactor
BS EN 12697-30:2004 Bituminous mixtures - Test methods for hot mix asphalt - Specimen preparation by impact compactor
BS EN 60811-506:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Impact test at low temperature for insulations and sheaths
BS 2782-3 Method 352F:1996 Methods of testing plastics - Mechanical properties - Determination of impact resistance by the free-falling dart method (instrumented puncture test)
BS EN 12600:2002(2010) Glass in building. Pendulum test. Impact test method and classification for flat glass
BS EN 60512-14-7:1998 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Sealing tests. Test 14g. Impacting water
BS ISO 14188:2012 Metallic and other inorganic coatings. Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
BS EN ISO 9073-17:2008 Textiles - Test methods for nonwovens - Determination of water penetration (spray impact)

RO-ASRO, What does the impact tester measure?

STAS 7238-1980 PENDULUM IMPACT TESTING MACHIXES, FOR TESTING MATERIALS
STAS 1400-1975 Tests of metals U-NOTCH IMPACT TEST

Lithuanian Standards Office , What does the impact tester measure?

LST EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000)
LST EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997)
LST EN 60512-7-2-2012 Connectors for electronic equipment - Tests and measurements -- Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (IEC 60512-7-2:2011)
LST EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
LST EN ISO 148-2:2009 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2008)
LST EN ISO 20567-2:2006 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2005)
LST EN ISO 6603-1:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000)
LST EN ISO 13090-1:2001 Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998)
LST EN ISO 20567-3:2013 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012)
LST EN 14066-2004 Natural stone test methods - Determination of resistance to ageing by thermal shock
LST EN 14617-9-2005 Agglomerated stone - Test methods - Part 9: Determination of impact resistance
LST EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2008)
LST EN 13696-2009 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
LST EN ISO 20567-1:2006 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2005)
LST EN ISO 179-2:2000/A1:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data (ISO 179-2:1997/Amd.1:2011)
LST EN 846-13-2002 Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings

German Institute for Standardization, What does the impact tester measure?

DIN 52189-1:1981-12 Testing of wood; Impact bending test; Determination of impact bending strength
DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
DIN 51222:2017 Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification
DIN 51222:2016 Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification
DIN EN 1177:2018 Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
DIN EN ISO 179-2:2020-09 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020); German version EN ISO 179-2:2020
DIN EN ISO 179-2:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997 + Amd.1:2011); German version EN ISO 179-2:1999 + A1:2012
DIN EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999
DIN EN ISO 179-1:2022-05 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO/DIS 179-1:2022); German and English version prEN ISO 179-1:2022 / Note: Date of issue 2022-03-25*Intended as replacement for DIN EN ISO 179-1 (2010-11).
DIN EN ISO 179-1:2010-11 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010 / Note: To be replaced by DIN EN ISO 179-1 (2022-05).
DIN EN ISO 148-2:2009 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2008); English version of DIN EN ISO 148-2:2009-09
DIN EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)
DIN EN ISO 20567-2:2022-12 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO/DIS 20567-2:2022); German and English version prEN ISO 20567-2:2022 / Note: Date of issue 2022-11-18*Intended as repla...
DIN ISO 4532:1995 Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test; identical with ISO 4532:1991
DIN EN ISO 20567-3:2013-04 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012); German version EN ISO 20567-3:2012
DIN EN ISO 13090-1:1998-10 Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998); German version EN ISO 13090-1:1998
DIN EN ISO 6603-1:2000-10 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000
DIN EN ISO 6603-2:2023-11 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO 6603-2:2023); German version EN ISO 6603-2:2023
DIN EN 14066:2013-06 Natural stone test methods - Determination of resistance to ageing by thermal shock; German version EN 14066:2013
DIN EN 14617-9:2005-06 Agglomerated stone - Test methods - Part 9: Determination of impact resistance; German version EN 14617-9:2005
DIN EN ISO 148-3:2017-04 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016); German version EN ISO 148-3:2016
DIN 51230:1977 Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens
DIN EN ISO 13090-1:1998 Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998); German version EN ISO 13090-1:1998
DIN EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (IEC 60512-7-2:2011); German version EN 60512-7-2:2012
DIN EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000
DIN EN ISO 20567-2:2007 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2005); English version of DIN EN ISO 20567-2:2007-01
DIN 52310-2:1991 Headform impact test on safety glazing materials for road vehicles with decleration measurement
DIN EN ISO 179-1:2023-10 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2023); German version EN ISO 179-1:2023
DIN EN ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011); German version EN ISO 28927-10:2011
DIN EN 1621-1:2013 Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods; German version EN 1621-1:2012
DIN EN ISO 20567-2:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2017); German version EN ISO 20567-2:2017
DIN EN ISO 20567-2:2023-09 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2023); German version EN ISO 20567-2:2023
DIN EN 846-13:2001-12 Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings; German version EN 846-13:2001

KR-KS, What does the impact tester measure?

KS M ISO 13802-2016 Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing
KS M ISO 179-1-2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
KS B ISO 13090-1_2001-2016 Mechanical vibration and shock－Guidance on safety aspects of tests and experiments with people－Part 1：Exposure to whole-body mechanical vibration and repeated shock
KS M ISO 20567-2-2021 Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body
KS B ISO 7626-5-2019 Vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
KS F 2581-2013(2023) Standard test method for determination of aggregates impacting value?Method of test for production control of aggregate
KS B ISO 14963-2022 Mechanical vibration and shock — Guidelines for dynamic tests and investigations on bridges and viaducts

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, What does the impact tester measure?

GB/T 3808-2002 Verification of pendulum-type impact testing machines(ISO 148-2:1998,Metallic materials--Charpy pendulum impact test--Part 2: Verification of test machines,MOD)
GB/T 15099-1994 Test methods for mechanical shock fragility of products, using shock machines
GB/T 21189-2007 Verification of pendulum impact-testing machines used for charpy,lzod and tensile impact-testing of plastics
GB/T 11349.3-2006 Vibration and shock.Experimental determination of mechanical mobility.Part 3:Measurement using impact excitation
GB/T 11349.3-1992 Experimental determination of mechanical mobility.Measurements using impact excitation
GB/T 1043.1-2008 Plastics.Determination of charpy impact properties.Part 1:Non-instrumented impact test
GB/T 8171-1987 Test method for mechanical shock fragility rating of products--Using package cushioning materials
GB/T 8171-2008 Test method for mechanical shock fragility rating of products using packaging cushioning materials
GB/T 29715-2013 Mechanical vibration and shock.Guidelines for dynamic tests and investigations on bridges and viaducts
GB/T 16896.2-2016 Instruments and software used for measurement in high-voltage and high-current tests.Part 2: Requirements for software for tests with impulse voltages and currents

国家市场监督管理总局、中国国家标准化管理委员会, What does the impact tester measure?

GB/T 3808-2018 Verification of pendulum-type impact testing machines
GB/T 7991.4-2019 Test method of viterous and porcelain enamels—Part 4：Determination of resistance to impact

Japanese Industrial Standards Committee (JISC), What does the impact tester measure?

JIS K 7111-1:2012 Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
JIS B 7722:1999 Charpy pendulum impact test -- Verification of testing machines
JIS C 0912:1984 Shock testing procedure for electric machines and equipment
JIS B 7739:2011 Pendulum-type impact-testing machines for Non-Metallic Materials -- Verification of testing machines
JIS C 5402-7-2:2019 Connectors for electronic equipment -- Tests and measurements -- Part 7-2: Impact tests (free connectors) -- Test 7b: Mechanical strength impact
JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
JIS B 7722:2018 Metallic materials -- Charpy pendulum impact test -- Verification of testing machines
JIS K 7111-1:2006 Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
JIS K 7111-2:2006 Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test
JIS Z 0119:1994 Mechanical-shock fragility testing methods of products for packaging design
JIS B 7740:2018 Metallic materials -- Charpy pendulum impact test -- Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
JIS K 7211-2:2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing
JIS A 1509-7:2014 Test methods for ceramic tiles -- Part 7: Determination of resistance to thermal shock
JIS A 1509-7:2008 Test methods for ceramic tiles -- Part 7: Determination of resistance to thermal shock
JIS K 7211-1:2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing

BE-NBN, What does the impact tester measure?

NBN-EN 10045-2-1993 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)

PL-PKN, What does the impact tester measure?

PN H04374-1964 Calibration of pendulum impact testing machines
PN-EN ISO 179-2-2020-12 E Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO179-2:2020)
PN B06071-1992 Methods of testing doors. Hard body impact test on door leaves
PN B06080-1991 Methods of testing doors. Soft and heavy body impact test on door leaves

Korean Agency for Technology and Standards (KATS), What does the impact tester measure?

KS M ISO 13802-2016(2021) Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing
KS M ISO 13802:2012 Plastics-Verification of pendulum impact-testing machines-Charpy, Izod and tensile impact-testing
KS M ISO 13802:2016 Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing
KS C IEC 60255-21-2-2002(2022) Electrical relays — Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment —Section Two: Shock and bump tests
KS C 0905-1984 Shock Testing Procedure for Electric Machines and Equipment
KS M ISO 179-1:2012 Plastics－Determination of Charpy impact properties－Part 1：Non-instrumented impact test
KS M ISO 179-2-2012(2022) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS M ISO 179-2-2012(2017) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS M ISO 179-2:2012 Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS M ISO 179-1-2012(2017) Plastics－Determination of Charpy impact properties－Part 1：Non-instrumented impact test
KS M ISO 179-1:2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
KS M ISO 6603-2-2002(2022) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing
KS M ISO 6603-2-2002(2017) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing
KS F 8106-1996(2011) Vibration and shock testing methods for construction machinery gauges
KS F 8106-1986 Vibration and shock testing methods for construction machinery gauges
KS M ISO 6603-1-2002(2017) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 1：Non-instrumented impact testing
KS M ISO 6603-1-2002(2022) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 1：Non-instrumented impact testing
KS F 8106-1996 Vibration and shock testing methods for construction machinery gauges
KS B ISO 148-2-2004(2009) Metallic materials－Charpy pendulum impact test－Part 2：Verification of test machines
KS R ISO 3784:2003 Road vehicles-Measurement of impact velocity in collision tests
KS R ISO 3784-2014(2019) Road vehicles — Measurement of impact velocity in collision tests
KS R ISO 3784:2014 Road vehicles — Measurement of impact velocity in collision tests
KS B ISO 7626-5:2014 Vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
KS M ISO 20567-2:2011 Paints and varnishes－Determination of stone-chip resistance of coatings－Part 2：Single-impact test with a guided impact body
KS M ISO 20567-2-2011(2016) Paints and varnishes－Determination of stone-chip resistance of coatings－Part 2：Single-impact test with a guided impact body
KS M ISO 6603-2:2002 Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing
KS M ISO 20567-2:2021 Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body
KS B 0720-5-2001 Vibration and shock-Experimental determination of mechanical mobility- Part 5 : Measurements using impact excitation with an exciter which is not attached to the structure
KS C IEC 61083-2:2006 Digital recorders for measurements in high voltage impulse tests－Part 2：Evaluation of software used for the determination of the parameters of impulse waveforms
KS R ISO 8721-2014(2019) Road vehicles — Measurement techniques in impact tests — Optical instrumentation
KS C IEC 60255-21-3-2012(2022) Electrical relays－Part 21：Vibration, shock, bump and seismic tests on measuring relays and protection equipment－Section 3：Seismic tests
KS B ISO 7626-5:2019 Vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
KS C IEC 60722-2002(2012) Guide to the lightning impulse and switching impulse testing of power transformers and reactor
KS F 2581-2013(2018) Standard test method for determination of aggregates impacting value?Method of test for production control of aggregate
KS C IEC 60255-21-2:2002 Electrical relays－Part 21：Vibration, shock, bump and seismic tests on measuring relays and protection equipment－Section Two：Shock and bump tests
KS C IEC 60255-21-1-2002(2022) Electrical relays－Part 21：Vibration, shock, bump and seismic tests on measuring relays and protection equipment－Section One：Vibration test(sinusoidal)
KS C IEC 60255-21-2-2002(2017) Electrical relays－Part 21：Vibration, shock, bump and seismic tests on measuring relays and protection equipment－Section Two：Shock and bump tests
KS R ISO 10997:2008 Passenger vehicles-Side impact with deformable moving barrier-Full scale test
KS R ISO 10997:2014 Passenger vehicles — Side impact with deformable moving barrier — Full scale test
KS C IEC 60811-506-2015(2020) Electric and optical fibre cables — Test methods for non-metallic materials — Part 506: Mechanical tests — Impact test at low temperature for insulations and sheaths
KS B ISO 7626-2:2014 Vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter

YU-JUS, What does the impact tester measure?

JUS N.A5.041-1987 Verification mechanical strength resistance ageinst impact. Impact-test apparatus
JUS C.A4.025-1985 Mechanical testing of meta/s. Charpy impact test (V-notch)
JUS N.A5.044-1988 Verification mechanical strength resistance against inpact. Sprlng-operate? impact-te?t apparatvs

NL-NEN, What does the impact tester measure?

NEN-EN 10045-2-1993 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)
NEN 10068-2-27-1994 Climatic and environmental testing of electrical equipment. Part 2-27: Tests. Test Ea and guidance: Shock (IEC 68-2-27:1987)
NEN 10068-2-47-1994 Climatic and mechanical testing of electrical equipment. Part 2: Tests. Mounting of components, equipment and other articles for dynamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and steady-state acceleration (Ga) and guidance (IEC 68-2

CEN - European Committee for Standardization, What does the impact tester measure?

EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy@ Izod and tensile impact-testing
EN ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
EN ISO 20567-2:2006 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
EN ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills@ hammers and breakers

GOSTR, What does the impact tester measure?

GOST 34373-2017 Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
GOST 7268-1982 Steel. Method for determination of ability to mechanical ageing by impact bend testing

Standard Association of Australia （SAA）, What does the impact tester measure?

AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)
AS 1146.3:1990 Methods for impact tests on plastics - Calibration of the testing machine
AS 4693.1:2004 Surfaces for sports areas - Methods of test - Determination of resistance to impact
AS 1774.24:2006 Refractories and refractory materials - Physical test methods - Determination of the resistance to thermal shock
AS 2001.2.8:2001 Methods of test for textiles - Physical tests - Determination of tear force of fabrics using the ballistic pendulum method (Elmendorf)
AS 2362.8:1990 Automatic fire detection and alarm systems - Methods of test for actuating devices - Impulse voltage withstand test
AS/NZS 2512.3.1:1999 Methods of testing protective helmets Method 3.1-Determination of impact energy attenuation-Helmet drop test

National Metrological Technical Specifications of the People's Republic of China, What does the impact tester measure?

JJF(航空) 036-1988 Verification method of pendulum weighing instrument for impact testing machine

American National Standards Institute （ANSI), What does the impact tester measure?

ANSI/TIA-455-2C-1998 Impact Test Measurements for Fiber Optic Devices
ANSI/TIA/EIA 455-2C-1998 Impact Test Measurements for Fiber Optic Devices
BS EN ISO 179-1:2023 Plastics. Determination of Charpy impact properties Non-instrumented impact test (British Standard)
ANSI/EIA 364-27B:1996 Electric Connectors - Mechanical Shock (Specified Pulse) Test Procedure
ANSI/ASTM D5420:1998 Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ANSI/ASTM F1976:2013 TEST METHOD FOR IMPACT ATTENUATION PROPERTIES OF ATHLETIC SHOES USING AN IMPACT TEST
ANSI/EIA 364-27C:2011 Mechanical Shock (Specified Pulse) Test Procedure for Electrical Connectors and Sockets
BS EN ISO 6603-2:2023 Plastics. Determination of puncture impact behaviour of rigid plastics Instrumented impact testing (British Standard)
ANSI/ASTM E1236:1991 Practice for Qualifying Charpy Impact Machines as Reference Machines
ANSI/ASTM F2634:2010 TEST METHOD FOR LABORATORY TESTING OF POLYETHYLENE (PE) BUTT FUSION JOINTS USING TENSILE-IMPACT METHOD
ANSI/ASTM F2398:2011 Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat

GM North America, What does the impact tester measure?

GM GM9032P-1988 Test for Determining Impact Strength of Plastics

RU-GOST R, What does the impact tester measure?

GOST R ISO 8568-2010 Shock testing machines. Declaration and verification of characteristics
GOST 31418-2010 Environmental dynamic test methods for machines, instrument and other technical articles. Shock tests with shock response spectrum synthesis
GOST R 53190-2008 Environmental dynamic test methods for machines, instruments and other technical articles. Shock tests with shock response spectrum synthesis
GOST R 59368.5-2021 Mechanical vibration and shock. Experimental determination of mechanical mobility. Part 5. Measurements using impact excitation with an exciter which is not attached to the structure
GOST ISO 7626-5-1999 Vibration and shock. Experimental determination of mechanical mobility. Part 5. Measurements using impact excitation with an exciter which is not attached to the structure
GOST R ISO 9073-17-2016 Textile. Test methods for nonwovens. Part 17. Determination of water penetration (spray impact)

SE-SIS, What does the impact tester measure?

SIS 11 03 21-1966 Calibration of pendulum impact testing machines Charpy
SIS 11 03 20-1966 Calibration of pendulum impact testing machines Charpy
SIS 11 03 21 E-1974 Kontroll av Charpy-hejare. Verifiering med kontrollstavar

ES-UNE, What does the impact tester measure?

UNE-EN ISO 179-2:2021 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)

SAE - SAE International, What does the impact tester measure?

SAE J984-1992 BODYFORMS FOR USE IN MOTOR VEHICLE PASSANGER COMPARTMENT IMPACT DEVELOPMENT

Society of Automotive Engineers (SAE), What does the impact tester measure?

SAE J984-1967 BODY FORMS FOR LABORATORY IMPACT TESTING
SAE ARP5482-2003 Photometric Data Acquisition Procedures for Impact Test

IN-BIS, What does the impact tester measure?

GM Daewoo, What does the impact tester measure?

GMKOREA EDS-T-7738-2011 Test Method for Determining the Impact-Saline Solution Resistance of Organic Coatings

International Electrotechnical Commission (IEC), What does the impact tester measure?

IEC 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
IEC 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents

Indonesia Standards, What does the impact tester measure?

SNI ISO 179-1:2011 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
SNI ISO 6603-2:2014 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
SNI ISO 6603-1:2011 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing

National Metrological Verification Regulations of the People's Republic of China, What does the impact tester measure?

JJG 931-1998 Verification Regulation of Instruments for Measuring Monent of Pendulum of Impact Tester

IT-UNI, What does the impact tester measure?

National Aeronautics and Space Administration (NASA), What does the impact tester measure?

NASA NACA-RM-L57H13-1957 BUFFET TESTS OF AN ATTACK-AIRPLANE MODEL WITH EMPHASIS ON ANALYSIS OF DATA FROM WIND-TUNNEL TESTS

(U.S.) Telecommunications Industries Association , What does the impact tester measure?

TIA-455-2C-1998 Impact Test Measurements for Fiber Optic Devices

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, What does the impact tester measure?

GB/T 1043.2-2018 Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test
GB/T 33732-2017 Textiles—Determination of resistance to water penetration—Impact penetration test
GB/T 35160.6-2017 Test methods for agglomerated stone—Part 6：Determination of impact resistance

European Committee for Electrotechnical Standardization（CENELEC）, What does the impact tester measure?

EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
EN 50289-3-6:2001 Communication Cables - Specifications for Test Methods Part 3-6: Mechanical Test Methods - Impact Resistance of the Cable
EN 60255-21-2:1995 Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection Equipment Section 2: Shock and Bump Tests

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, What does the impact tester measure?

IPC/JEDEC-9703-2009 Mechanical Shock Test Guidelines for Solder Joint Reliability

Electronic Components, Assemblies and Materials Association, What does the impact tester measure?

ECA EIA-364-27B-1996 TP-27B Mechanical Shock (Specified Pulse) Test Procedure for Electrical Connectors

CZ-CSN, What does the impact tester measure?

CSN 70 0559-1972 Testing of glass containers. Thermal shock test on glass containers

CH-SNV, What does the impact tester measure?

SN EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)

AENOR, What does the impact tester measure?

UNE-EN ISO 179-2:2000 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 2: INSTRUMENTED IMPACT TEST (ISO 179-2:1997)
UNE-EN ISO 179-1:2011 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
UNE-EN ISO 148-2:2017 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016)
UNE-EN ISO 6603-1:2001 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing. (ISO 6603-1:2000)
UNE-EN 60255-21-2:1996 ELECTRICAL RELAYS. PART 21: VIBRATION, SHOCK, BUMP AND SEISMIC TESTS ON MEASURING RELAYS AND PROTECTION EQUIPMENT. SECTION 2: SHOCK AND BUMP TESTS.
UNE-EN 14066:2014 Natural stone test methods - Determination of resistance to ageing by thermal shock
UNE-EN ISO 20567-3:2013 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012)
UNE-EN 14617-9:2005 Agglomerated stone - Test methods - Part 9: Determination of impact resistance
UNE-EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016)
UNE-EN 13696:2009 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
UNE-EN ISO 13090-1:1999 MECHANICAL VIBRATION AND SHOCK. GUIDANCE ON SAFETY ASPECTS OF TESTS AND EXPERIMENTS WITH PEOPLE. PART 1: EXPOSURE TO WHOLE-BODY MECHANICAL VIBRATION AND REPEATED SHOCK (ISO 13090-1:1998)
UNE-EN ISO 20567-1:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2017)
UNE-EN ISO 179-2:2000/A1:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data (ISO 179-2:1997/Amd 1:2011)
UNE-EN 846-13:2002 Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings.

Group Standards of the People's Republic of China, What does the impact tester measure?

T/GXMES 004-2023 Hydraulic rock drill impact energy test method laser vibration measurement method

VN-TCVN, What does the impact tester measure?

TCVN 312-2-2007 Metallic materials.Charpy pendulum impact test.Part 2:Verification of test machines

The American Road & Transportation Builders Association, What does the impact tester measure?

AASHTO T 96-2002 Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
AASHTO T 243M/T 243-2008 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel

Association of German Mechanical Engineers, What does the impact tester measure?

DVS 2203-3-1985 Testing of welded joints of thermoplastics; tensile impact test

Professional Standard - Agriculture, What does the impact tester measure?

GB 8171-1987 Test method for mechanical impact brittleness of products using cushioning packaging materials

ECIA - Electronic Components Industry Association, What does the impact tester measure?

EIA-364-27C-2011 TP-27C MECHANICAL SHOCK (SPECIFIED PULSE) TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS

Military Standard of the People's Republic of China-General Armament Department, What does the impact tester measure?

GJB 736.9-1990 Test methods for pyrotechnics Detonator axial shock wave output measurement Plexiglas partition test
GJB 8693.1-2015 Mortar Test Methods Part 1: Buffer Recoil and Retracement Measurement

BR-ABNT, What does the impact tester measure?

ABNT NBR 9493-2012 Safety glass - Test method for determination of impact resistance with "Phantom"

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, What does the impact tester measure?

GJB 5486.1-2005 Test methods of mortar　Part 1:Recoil and counterrecoil travel measurement of shock absorber

United States Navy, What does the impact tester measure?

NAVY MIL-S-901 D-1989 SHOCK TESTS, H.I. (HIGH-IMPACT) SHIPBOARD MACHINERY, EQUIPMENT, AND SYSTEMS, REQUIREMENTS FOR

Aerospace, Security and Defence Industries Association of Europe (ASD), What does the impact tester measure?

ASD-STAN PREN 2003-3-1998 Aerospace Series Steel Test Methods Part 3: Calibration of Pendulum Impact Machines (Edition P 1)