ZH
RU
ES

Homogeneous assay system

Homogeneous assay system, Total:500 items.

In the international standard classification, Homogeneous assay system involves: Fruits. Vegetables, Prepackaged and prepared foods, Paper and board, Air quality, Wood, sawlogs and sawn timber, Fibre optic communications, Plastics, Textile fibres, Glass, Reinforced plastics, Optical equipment, Protective equipment, Ceramics, Testing of metals, Software development and system documentation, Metrology and measurement in general, Nuclear energy engineering, Raw materials for rubber and plastics, Crude petroleum, Quality, Lubricants, industrial oils and related products, Rubber and plastics products, Radiation measurements, Photography, Ground service and maintenance equipment, Analytical chemistry, Chipless working equipment, Fuels, Burners. Boilers, Optics and optical measurements, Audio, video and audiovisual engineering, Products of the chemical industry, Measurement of volume, mass, density, viscosity, Water quality, Electrical accessories, Protection against fire, Electricity. Magnetism. Electrical and magnetic measurements, Equipment for the chemical industry, Surface treatment and coating, Laboratory medicine, Power stations in general, Graphic technology, Farming and forestry, Elements of buildings, Telecommunication systems, Radiocommunications, Vocabularies, Environmental protection, Industrial automation systems, Services, Products of the textile industry, Telecommunications in general, Electrical engineering in general, Electrical wires and cables, Applications of information technology, Construction materials, Electrical equipment for working in special conditions, Pipeline components and pipelines, Semiconductor devices, Non-destructive testing, Cellular materials, Radiation protection, Information technology (IT) in general, Extraction and processing of petroleum and natural gas, Explosion protection.

SE-SIS, Homogeneous assay system

• SIS SS 84 51 05-1983 Glass containers - Determination of homogenity
• SIS SS-ISO 9003:1987 Quality systems - Model for quality assurance in final inspection and test
• SIS SS IEC 780:1988 Nuclear instrumentation — Qualification of electrical items of the safety system for nuclear power generating stations
• SIS SS 02 01 70-1985 Measurement and calibration systems — Specification of system requirements
• SIS SS-ISO 10 012-1:1992 Quality assurance requirements for measuring equipment — Part 1: Metrological confirmation system for measuring equipment

RU-GOST R, Homogeneous assay system

• GOST 24283-1980 Homogenized preserved food for children. Method for determination of the quality of cutting into small pieces
• GOST 32546-2013 Paper and board. Sampling to determine average quality
• GOST R ISO 11222-2006 Air quality. Determination of the uncertainty of the time average of air quality measurements
• GOST 15173-1970 Plastics. Method for determination of mean coefficient of linear thermal expansion
• GOST 8047-2001 Paper and board. Sampling to determine average quality
• GOST 8047-1993 Paper and board. Acceptance rules. Sampling to determine average quality
• GOST 8047-1978 Paper and cardboard. Acceptance rules. Sampling for tests
• GOST R ISO 11771-2016 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
• GOST 24283-2014 Homogenized canned food for infants. Method for determination the degree of milling
• GOST 12.4.219-2002 Occupational safety standards system. Personal protection equipment. Method for determination of materials uniform
• GOST R 8.568-2017 State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
• GOST R 51060-1997 Instruments for measurement of optical average power of fibre optics transmission systems. General technical requirements
• GOST 8.473-1982 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for measuring exposure dose, mean exposure rate, mean energy fluence and mean density of pulsed X-ray radiation fluence energy
• GOST 29234.3-1991 Moulding sands. Methods for determination of medium size of seed and coefficient of homogeneity
• GOST R ISO 5799-2006 Direct-exposing medical and dental radiographic film/process systems. Determination of ISO speed and ISO average gradient
• GOST 8.021-2005 State system for ensuring the uniformity of measurements. State verification schedule for mass measuring instruments
• GOST 8.021-1984 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring mass
• GOST R 59514-2021 Water quality. System of automatic monitoring of pollutants
• GOST ISO 9236-1-2011 Sensitometry of screen/film systems for medical radiography. Part 1. Determination of sensitometric curve shape, speed and average gradient
• GOST R 40.002-2000 GOST R certification system. Quality systems register. Basic regulations
• GOST R 40.002-1996 Gost R. Certification System Quality Systems Register. Basic regulations
• GOST R ISO 13067-2016 State system for insuring the uniformity of measurements. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
• GOST R ISO 9236-1-2008 Sensitometry of screen/film systems for medical radiography. Part 1. Determination of sensitometric curve shape, speed and average gradient
• GOST 29061-1991 Plastics coated fabrics. Polyvinyl chloride coatings. Rapid method for checking fusion
• GOST R 8.703-2010 State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles
• GOST 4.214-1980 Quality ratings system. Building. Cements. Nomenclature of ratings
• GOST R 8.890-2015 State system for ensuring the traceability of measurements. Optoelectronic instruments as a part of space-based informational and measuring systems for Earth Observation. Organizational and methodical provisions for ensuring the uniformity of radiometric
• GOST 8.275-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the laser output average power and laser pulse energy within the wavelength range from 0,3 to 12,0 m
• GOST 8.578-2008 State system for ensuring the uniformity of measurements. State verification scheme for measuring instruments of the content of components in gaseous media
• GOST R ISO 10849-2006 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems
• GOST 8.578-2002 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in gaseous media
• GOST R ISO/IEC 25021-2014 Information technology. Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Quality measure elements
• GOST 8.445-1981 State system for ensuring the uniformity of measurements. Standard means mesuring laser output average power. Methods and means for verification
• GOST 4.452-1986 Product-quality index system. Phetometric instruments. Nomenclature of indices

International Organization for Standardization (ISO), Homogeneous assay system

• ISO 186:1977 Paper and board — Sampling for testing
• ISO 186:2002 Paper and board - Sampling to determine average quality
• ISO 186:1985 Paper and board; Sampling to determine average quality
• ISO 186:1994 Paper and board - Sampling to determine average quality
• ISO 11222:2002 Air quality - Determination of the uncertainty of the time average of air quality measurements
• ISO 7991:1987 Glass; Determination of coefficient of mean linear thermal expansion
• ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
• ISO 599:1985 Plastics; Polyamide homopolymers; Determination of matter extractable by boiling methanol
• ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
• ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
• ISO 20181:2023 Stationary source emissions — Quality assurance of automated measuring systems
• ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
• ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
• ISO 14237:2000 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
• ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
• ISO 9039:1994 Optics and optical instruments - Quality evaluation of optical systems - Determination of distortion
• ISO 1269:1975 Title missing - Legacy paper document
• ISO 1269:1980 Plastics; Homopolymer and copolymer resins of vinyl chloride; Determination of volatile matter (including water)
• ISO/IEC 25023:2016 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of system and software product quality
• ISO 16564:2004/Amd 1:2006 Rubber, raw natural — Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) — Amendment 1
• ISO 16014-4:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
• ISO 16014-4:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
• ISO 10849:1996 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Performance characteristics of automated measuring systems
• ISO 1269:2006 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water)
• ISO/IEC 25020:2019 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality measurement framework
• ISO 16014-2:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
• ISO 16014-2:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
• ISO 9236-1:1996 Photography — Sensitometry of screen/film systems for medical radiography — Part 1: Determination of sensitometric curve shape, speed and average gradient
• ISO 6843:1988 Surface active agents; sulfated ethoxylated alcohols and alkylphenols; estimation of the mean relative molecular mass
• ISO/IEC 25024:2015 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of data quality
• ISO 17179:2016 Stationary source emissions - Determination of the mass concentration of ammonia in flue gas - Performance characteristics of automated measuring systems
• ISO 9236-1:2004 Photography - Sensitometry of screen/film systems for medical radiography - Part 1: Determination of sensitometric curve shape, speed and average gradient
• ISO 6845:1982 Surface active agents — Technical alkane sulphonates — Determination of mean relative molecular mass of alkane monosulphonates
• ISO 19929:2017 Plastics - Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
• ISO/IEC 25022:2016 Systems and software engineering - Systems and software quality requirements and evaluation (SQuaRE) - Measurement of quality in use
• ISO/CIE 23539:2023 | CIE TC 2-93 Photometry — The CIE system of physical photometry
• ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
• ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
• ISO 5799:1991 Photography; direct-exposing medical and dental radiographic film/process systems; determination of ISO speed and ISO average gradient
• ISO 9039:1994/Cor 1:2004 Optics and optical instruments - Quality evaluation of optical systems - Determination of distortion; Technical Corrigendum 1
• ISO 6841:1988 Surface active agents; technical straight-chain sodium alkylbenzenesulfonates; determination of mean relative molecular mass by gas-liquid chromatography
• ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
• ISO 10849:2022 Stationary source emissions — Determination of the mass concentration of nitrogen oxides in flue gas — Performance characteristics of automated measuring systems
• ISO/FDIS 7935:2011 Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems
• ISO/PRF 7935:2023 Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems
• ISO/DIS 7935 Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems
• ISO 6841:1983 Surface active agents — Technical straight-chain sodium alkylbenzenesulphonates — Determination of mean relative molecular mass — Gas-liquid chromatographic method
• ISO/TS 24155:2007 Hydrometry - Hydrometric data transmission systems - Specification of system requirements
• ISO/CIE 23539:2023 Photometry — The CIE system of physical photometry
• ISO/CD 10903:2023 Pipeline geohazards monitoring technologies, processes and systems
• ISO 6184-4:1985 Explosion protection systems; Part 4 : Determination of efficacy of explosion suppression systems

Korean Agency for Technology and Standards (KATS), Homogeneous assay system

• KS M ISO 186:2004 Paper and board－Sampling to determine average quality
• KS I ISO 11222:2021 Air quality — Determiniation of the uncertainty of the time average of air quality measurements
• KS I ISO 11222-2006(2016) Air quality－Determination of the uncertainty of the time average of air quality measurements
• KS I ISO 11222:2006 Air quality-Determination of the uncertainty of the time average of air quality measurements
• KS L ISO 7991:2012 Glass－Determination of coefficient of mean linear thermal expansion
• KS L ISO 7991-2012(2017) Glass－Determination of coefficient of mean linear thermal expansion
• KS L ISO 7991-2012(2022) Glass－Determination of coefficient of mean linear thermal expansion
• KS I ISO 11771-2013(2018) Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
• KS A ISO 16424:2013 Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements
• KS I ISO 11771:2013 Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
• KS M ISO 16564:2007 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
• KS M ISO 16564-2007(2022) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
• KS M ISO 16564-2007(2017) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
• KS B ISO 9039:2013 Optics and optical instruments ― Quality evaluation of optical systems ― Determination of distortion
• KS B ISO 9039:2003 Optics and optical instruments-Quality evaluation of optical systems-Determination of distortion
• KS I ISO 9169:2009 Air quality-Definition and determination of performance characteristics of an automatic measuring system
• KS I ISO 9169-2014(2019) Air quality — Definition and determination of performance characteristics of an automatic measuring system
• KS I ISO 9169:2014 Air quality — Definition and determination of performance characteristics of an automatic measuring system
• KS C IEC 62251:2009 Multimedia systems and equipment-Quality assessment-Audio-video communication systems
• KS C IEC 62251:2014 Multimedia systems and equipment — Quality assessment — Audio-video communication systems
• KS I ISO 10849:2008 Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
• KS X ISO/IEC 25023:2019 Systems and software engineering — Systems and software Quality Requirements and Evaluation(SQuaRE) — Measurement of system and software product quality
• KS P ISO 5799-2008(2018) Photography－Direct-exposing medical and dental radiographic film/process systems－Determination of ISO speed and ISO average gradient
• KS A ISO 5799-2002(2017) Photography－Direct－exposing medical and dental radiographic film/process systems－ Determination of ISO speed and ISO average gradient
• KS A ISO 5799-2002(2022) Photography－Direct－exposing medical and dental radiographic film/process systems－ Determination of ISO speed and ISO average gradient
• KS B ISO 10849:2009 Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
• KS I ISO 10849-2008(2018) Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
• KS B ISO 10849-2003(2008) Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
• KS A ISO 5799:2002 Photography－Direct－exposing medical and dental radiographic film/process systems－ Determination of ISO speed and ISO average gradient
• KS P ISO 5799:2008 Photography－Direct-exposing medical and dental radiographic film/process systems－Determination of ISO speed and ISO average gradient
• KS M ISO 6841-2007(2018) Surface active agents－Technical straight-chain sodium alkylbenzenesulfonates－Determination of mean relative molecular mass by gas-liquid chromatography
• KS M 1071-6-2017(2022) Guide for determination of the partition coefficient of chemical substances
• KS Q ISO 10012:2004 Quality management systems－Requirements for measurement processes and measuring equipment
• KS M 1071-6-2017 Guide for determination of the partition coefficient of chemical substances

Japanese Industrial Standards Committee (JISC), Homogeneous assay system

• JIS P 8110:2006 Paper and board -- Sampling to determine average quality
• JIS C 61280-2-11:2010 Fiber optic communication subsystem test procedures -- Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
• JIS P 8110:2001 Paper and board -- Sampling to determine average quality
• JIS K 7382:2002 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water)
• JIS X 25023:2018 Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Measurement of system and software product quality
• JIS X 25021:2014 Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Quality measure elements
• JIS K 7252-3:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
• JIS K 7252-4:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
• JIS K 7252-3:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
• JIS K 7252-4:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
• JIS K 0143:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
• JIS K 0143:2000 Surface chemical analysis -- Secondary ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
• JIS K 7252-2:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
• JIS K 7252-2:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
• JIS Z 4571:2001 The alanine dosimetry system

German Institute for Standardization, Homogeneous assay system

• DIN ISO 11222:2002 Air quality - Determination of the uncertainty of the time average of air quality measurements (ISO 11222:2002)
• DIN ISO 11222:2002-12 Air quality - Determination of the uncertainty of the time average of air quality measurements (ISO 11222:2002)
• DIN EN 61280-2-11:2006-11 Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring (IEC 61280-2-11:2006); German version EN 61280-2-11:2006
• DIN EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites (ISO 527-4:1997); German version EN ISO 527-4:1997
• DIN ISO 7991:1998 Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991:1987)
• DIN 58186:1982 Quality evaluation of optical systems; determination of veiling glare
• DIN EN ISO 11771:2011-04 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010); German version EN ISO 11771:2010
• DIN 58187:1986 Quality evaluation of optical systems; determination of radial distortion
• DIN ISO 7991:1998-02 Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991:1987)
• DIN EN 14181:2004 Stationary source emissions - Quality assurance of automated measuring systems; German version EN 14181:2004
• DIN EN 14181:2015-02 Stationary source emissions - Quality assurance of automated measuring systems; German version EN 14181:2014
• DIN EN 61280-2-11:2006 Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring (IEC 61280-2-11:2006); German version EN 61280-2-11:2006
• DIN EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006); English version of DIN EN ISO 9169:2006-09
• DIN 58188:1991 Quality evaluation of optical systems - Determination of relative irradiance in the image plane
• DIN EN ISO 9169:2006-09 Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006); German version EN ISO 9169:2006
• DIN EN ISO 186:2002 Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002
• DIN 51402-2:1979 Determination of flue gases of oil burning systems; method by fluid means for detection of oil derivatives
• DIN EN ISO 1269:2007 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) (ISO 1269:2006); English version of DIN EN ISO 1269:2007-02
• DIN EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
• DIN EN 13284-2:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems; German version EN 13284-2:2017 / Note: Applies in conjunction with DIN EN 14181 (2015-02).
• DIN ISO 9236-1:2007 Photography - Sensitometry of screen/film systems for medical radiography - Part 1: Determination of sensitometric curve shape, speed and average gradient (ISO 9236-1:2004);English version of DIN ISO 9236:1:2007-08
• DIN EN 15267-4:2017-05 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources; German version EN 15267-4:2017 / Note: To be r...
• DIN ISO 9039:2008-08 Optics and photonics - Quality evaluation of optical systems - Determination of distortion (ISO 9039:2008)
• DIN EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources; English version of DIN EN 15267-3:2008-03
• DIN EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury: Automated measuring systems; English version of DIN EN 14884:2006-03
• DIN EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems; German version EN 13284-2:2004
• DIN EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010); German version EN ISO 11771:2010
• DIN CEN/TS 17198:2018-10*DIN SPEC 33979:2018-10 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance; German version CEN/TS 17198:2018
• DIN EN 61280-2-8:2004 Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements (IEC 61280-2-8:2003); German version EN 61280-2-8:2003
• DIN EN 15267-3:2008-03 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources; German version EN 15267-3:2007 / Note: To be replaced by DIN...
• DIN CEN/TR 15729:2010-11*DIN SPEC 1188:2010-11 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles; German version CEN/TR 15729:2010
• DIN EN 14181:2015 Stationary source emissions - Quality assurance of automated measuring systems; German version EN 14181:2014
• DIN EN 15267-4:2022-08 Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources; German and English version prEN 152...

VN-TCVN, Homogeneous assay system

• TCVN 3649-2007 Paper and board.Sampling to determine average quality
• TCVN 6751-2009 Air quality.Definition and determination of performance characteristics of an automatic measuring system
• TCVN 6501-1999 Stationary source emissions.Determination of the mass concentration of nitrogen oxides.Performance characteristics of automated measuring systems

British Standards Institution (BSI), Homogeneous assay system

• BS EN ISO 186:2002 Paper and board - Sampling to determine average quality
• BS ISO 11222:2007 Air quality - Determination of the uncertainty of the time average of air quality measurements
• BS EN 61280-2-11:2006 Fibre optic communication subsystem test procedures - Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
• BS ISO 11222:2002 Air quality. Determination of the uncertainty of the time average of air quality measurements
• BS 7030:1988 Method for determination of the coefficient of mean linear thermal expansion of glass
• BS ISO/IEC 25021:2012 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Quality measure elements
• BS EN ISO 11771:2011 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
• BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
• BS EN ISO 11771:2010 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
• BS EN 14181:2004 Stationary source emissions - Quality assurance of automated measuring systems
• BS EN 14181:2014 Stationary source emissions. Quality assurance of automated measuring systems
• BS ISO 20181:2023 Stationary source emissions. Quality assurance of automated measuring systems
• BS EN 14884:2005 Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
• BS EN 14884:2005(2010) Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
• BS ISO 9236-1:2004 Photography. Sensitometry of screen/film systems for medical radiography. Determination of sensitometric curve shape, speed and average gradient
• BS ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
• BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems
• BS EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
• BS ISO 16014-2:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method
• PD IEC TS 63222-2:2023 Power quality management. Power Quality Monitoring System
• BS EN ISO 1269:2006 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water)
• BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
• BS EN 15267-4:2017 Air quality. Certification of automated measuring systems. Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
• BS EN 13284-2:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Quality assurance of automated measuring systems
• BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
• BS EN 15267-3:2007 Air quality - Certification of automated measuring systems - Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
• BS EN 15267-3:2008 Air quality - Certification of automated measuring systems - Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
• BS ISO 9039:2007 Optics and photonics - Quality evaluation of optical systems - Determination of distortion
• 21/30427641 DC BS ISO 20181. Stationary source emissions. Quality assurance of automated measuring systems
• BS ISO 9039:2008 Optics and photonics. Quality evaluation of optical systems. Determination of distortion
• BS EN 62586-2:2017+A1:2021 Power quality measurement in power supply systems - Functional tests and uncertainty requirements
• BS EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
• BS ISO 17179:2016 Stationary source emissions. Determination of the mass concentration of ammonia in flue gas. Performance characteristics of automated measuring systems
• BS ISO/IEC 25023:2016 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Measurement of system and software product quality
• BS 6829-3.1:1989 Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonates. Method for determination of mean relative molecular mass
• BS EN 60835-2-8:1996 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systems. Adaptive equalizer
• BS PD CEN/TS 17198:2018 Stationary source emissions. Predictive Emission Monitoring Systems (PEMS). Applicability, execution and quality assurance
• BS EN 61069-7:1999 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system safety
• BS ISO 19929:2017 Plastics. Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
• BS ISO/IEC 25024:2015 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Measurement of data quality
• BS ISO/CIE 23539:2023 Photometry. The CIE system of physical photometry
• BS ISO 9236-3:1999 Photography - Sensitometry of screen/film systems for medical radiography - Determination of sensitometric curve shape, speed and average gradient for mammography
• BS EN IEC 61280-2-8:2021 Fibre optic communication subsystem test procedures. Digital systems. Determination of low BER using Q-factor measurements
• BS EN 62586-1:2014 Power quality measurement in power supply systems. Power quality instruments (PQI)
• BS ISO 10849:2022 Stationary source emissions. Determination of the mass concentration of nitrogen oxides in flue gas. Performance characteristics of automated measuring systems
• BS EN 62586-2:2014 Power quality measurement in power supply systems. Functional tests and uncertainty requirements
• BS EN 61069-3:1997 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system functionality
• BS EN 61069-5:1995 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system dependability
• BS ISO/IEC 25022:2016 Tracked Changes. Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). Measurement of quality in use
• BS CECC 50000 Supplement No. 1:1983 Harmonized system of quality assessment for electronic components - Generic specification: discrete semiconductor devices - CECC assessed process average
• BS EN 61069-4:1998 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system performance

YU-JUS, Homogeneous assay system

• JUS H.N8.212-1991 Paper and boar?. Sampling to determinc. avaragc. qxial1ty
• JUS B.E8.310-1989 Glass. Determinaticm of coefficient of tean linear ternal expansion

CEN - European Committee for Standardization, Homogeneous assay system

• EN ISO 186:1996 Paper and Board - Sampling to Determine Average Quality

Association Francaise de Normalisation, Homogeneous assay system

• NF Q03-009*NF EN ISO 186:2002 Paper and board - Sampling to determine average quality.
• NF Q03-009:1996 Paper and board. Sampling to determine average quality.
• NF X43-504*NF ISO 11222:2002 Air quality - Determination of the uncertainty of the time average of air quality measurements.
• NF ISO 11222:2002 Qualité de l'air - Détermination de l'incertitude de mesure de la moyenne temporelle de mesurages de la qualité de l'air
• NF EN 61280-2-11:2006 Procédures d'essai des sous-systèmes de télécommunications à fibres optiques - Partie 2-11 : systèmes numériques - Détermination du facteur de qualité moyenné par l'évaluation d'histogramme d'amplitude pour la surveillance de la qualité...
• NF B30-103:1968 Glass. Determination of mean coefficient of linear expansion (direct method).
• NF C93-807-2-11*NF EN 61280-2-11:2006 Fibre optic communication subsystem test procedures - Part 2-11 : digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
• NF X43-312*NF EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
• NF X43-309*NF EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury : automated measuring systems.
• NF X43-360:2004 Stationary source emissions - Quality assurance of automated measuring systems.
• NF X43-360*NF EN 14181:2014 Stationary source emissions - Quality assurance of automated measuring systems
• NF EN 14181:2014 Émission de sources fixes - Assurance qualité des systèmes automatiques de mesure
• NF X21-070*NF ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials.
• NF X43-572*NF EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
• NF EN ISO 9169:2006 Qualité de l'air - Définition et détermination de caractéristiques de performance d'un système automatique de mesurage
• NF EN 13284-2:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 2 : assurance qualité des systèmes de mesurage automatisés
• NF T51-750*NF EN ISO 1269:2007 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water)
• NF T51-750:1981 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of volatile matter (including water).
• NF X43-333-2*NF EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : quality assurance of automated measuring systems
• XP X43-420:2011 Émissions de sources fixes - Assurance qualité des PEMS (Système prédictif de suivi des émissions atmosphériques)
• NF X43-700-4*NF EN 15267-4:2017 Air quality - Certification of automated measuring systems - Part 4 : performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
• NF EN 15267-4:2017 Qualité de l'air - Certification des systèmes de mesurage automatisés - Partie 4 : spécifications de performance et modes opératoires d'essai des systèmes de mesurage automatisés pour le mesurage périodique des émissions de sources fixes
• NF S10-042:1998 Optics and optical instruments. Quality evaluation of optical systems. Determination of distorsion.
• NF ISO 9039:2009 Optique et photonique - Évaluation de la qualité des systèmes optiques - Détermination de la distorsion
• NF A09-212:1984 Industrial radiography. Determination of the speed and average gradient of film-based image receiving systems for use in the energy range from 50 keV to 300 keV.
• NF X43-700-3*NF EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3 : performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
• NF X43-333-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : automated measuring systems.
• NF EN 15267-3:2008 Qualité de l'air - Certification des systèmes de mesurage automatisés - Partie 3 : spécifications de performance et procédures d'essai pour systèmes de mesurage automatisés des émissions de sources fixes
• NF A09-211:1984 Industrial radiography. Determination of the speed and average gradient of film-based image receiving systems for use in the energy range from 300 keV to 1,5 meV with iridium 192.
• NF EN 62777:2016 Méthode d'évaluation de la qualité du champ acoustique des systèmes de haut-parleurs directionnels
• FD CEN/TR 15729:2011 Systèmes de canalisations en plastique - Plastiques thermodurcissables renforcés par du verre (PRV) à base de résine de polyester non saturé (UP) - Rapport sur la détermination de l'abrasion moyenne après un nombre défini de cycles d'essai
• NF C42-586-2/A1*NF EN 62586-2/A1:2021 Power quality measurement in power supply systems - Part 2 : functional tests and uncertainty requirements
• NF C42-586-2*NF EN 62586-2:2017 Power quality measurement in power supply systems - Part 2 : functional tests and uncertainty requirements
• NF T56-128:1977 Rigid rubber or plastics based cellular materials. Determination of the mean coefficient of linear construction.

IN-BIS, Homogeneous assay system

• IS 4394-1988

Danish Standards Foundation, Homogeneous assay system

• DS/ISO 11222:2003 Air quality - Determination of the uncertainty of the time average of air quality measurements
• DS/EN 61280-2-11:2006 Fibre optic communication subsystem test procedures -- Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
• DS/EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
• DS/EN 14181:2004 Stationary source emissions - Quality assurance of automated measuring systems
• DS/EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury - Automated Measuring Systems
• DS/ISO 10849:1996 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Performance characteristics of automated measuring systems
• DS/EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
• DS/ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
• DS/EN 45 012:1991 General criteria for certification bodies operating Quality System certification
• DS/EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
• DS/EN 62586-2:2021 Power quality measurement in power supply systems – Part 2: Functional tests and uncertainty requirements
• DS/ISO 9236-1:2008 Photography - Sensitometry of screen/film systems for medical radiography - Part 1: Determination of sensitometric curve shape, speed and average gradient
• DS/ISO 6184-4:1993 Explosion protection systems - Part 4: Determination of efficiency of explosion suppression systems

AENOR, Homogeneous assay system

• UNE-ISO 11222:2005 Air quality -- Determination of the uncertainty of the time average of air quality measurements
• UNE 400308:1997 GLASS. DETERMINATION OF COEFFICIENT OF MEAN LINEAR THERMAL EXPANSION.
• UNE-EN 14181:2015 Stationary source emissions - Quality assurance of automated measuring systems
• UNE-EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury: Automated measuring systems
• UNE-EN ISO 9169:2007 Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006)
• UNE-EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
• UNE 40151-1:1973 UNIVERSAL TEX SYSTEM TO DESIGNATE LINEAR MASS.
• UNE 77224:2000 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems.
• UNE 100003-2-1:2015 Thermal systems of the building. Criteria for classifying the quality of thermal systems. Part 2-1: Qualification criteria for the quality of the assembly.
• UNE 55806:1990 SURFACE ACTIVE AGENTS. TECHNICAL STRAIGHT-CHAIN SODIUM ALKYLBENZENESULFONATES. DETERMINATION OF MEAN RELATIVE MOLECULAR MASS BY GAS-LIQUID CHROMATOGRAPHY
• UNE-EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
• UNE-EN 62586-2:2014 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
• UNE 100003-2-2:2015 Thermal systems of the building. Criteria for classifying the quality of thermal systems. Part 2-2: Calculation methodology for qualification of the quality of assembly.

KR-KS, Homogeneous assay system

• KS I ISO 11222-2021 Air quality — Determiniation of the uncertainty of the time average of air quality measurements
• KS X ISO/IEC 25023-2019 Systems and software engineering — Systems and software Quality Requirements and Evaluation(SQuaRE) — Measurement of system and software product quality
• KS P ISO 5799-2008(2023) Photography－Direct-exposing medical and dental radiographic film/process systems－Determination of ISO speed and ISO average gradient
• KS M ISO 6841-2007(2023) Surface active agents－Technical straight-chain sodium alkylbenzenesulfonates－Determination of mean relative molecular mass by gas-liquid chromatography
• KS D ISO 14237-2003(2023)

未注明发布机构, Homogeneous assay system

• BS ISO 11222:2002(2007) Air quality — Determination of the uncertainty of the time average of air quality measurements
• SAE AS9003B-2021 Inspection and Test Quality System
• BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)
• BS EN 15267-3:2007(2008) Air quality — Certification of automated measuring systems — Part 3 : Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources

HU-MSZT, Homogeneous assay system

• MSZ KGST 1117-1978

CZ-CSN, Homogeneous assay system

• CSN 49 0102-1987 Tests of native wood properties. Method of annual ring average width and of summer-wood average quotient determining
• CSN ISO 7991:1992 Glass. Determination of the coefficient of mean linear thermal expansion
• CSN 72 5127-1987 Ceramic tiles. Determination of the mean coefficient of lenear thermal expansion
• CSN 42 0440-1985 Determination of the mean linear thermal expansion coefficient of metals
• CSN 34 6312-1985 Testing of ceramic electrotechnic materials. Determination of the mean coefficient of the specific linear thermal expansion
• CSN 72 5030-1973 Testing of fired ceramic materials. Definition of the specific linear thermal expansion and mean coefficient
• CSN IEC 780:1993 Qualification of electrical items of the safety system for nuclear power generating stations
• CSN 03 8101-1982 Basic requirements for quality Tests of anticorrosion protective systems

Professional Standard - Pharmaceutical Packaging, Homogeneous assay system

• YBB 0020-2003 Pingjunxianrepengzhangxishu Cedingfa Tests for coefficient of mean linear thermal expansion
• YBB 0020(03)-2003 Determination method of average linear thermal expansion coefficient (Trial)

Standard Association of Australia （SAA）, Homogeneous assay system

• AS/NZS 4492.5:2000 Wool-Fleece testing and measurement - Measurement of mean fibre diameter using the OFDA measuring system
• AS/NZS 4492.4:2000 Wool-Fleece testing and measurement - Measurement of mean fibre diameter and determination of fibre diameter distribution using the SIROLAN-LASERSCAN measuring system
• AS ISO/IEC 25023:2019 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of system and software product quality
• AS/NZS ISO/IEC 25021:2013
• AS/NZS ISO/IEC 25020:2022 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality measurement framework
• AS ISO/IEC 25024:2019 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of data quality
• AS ISO/IEC 25022:2019 Systems and software engineering — Systems and software quality requirements and evaluation (SQuaRE) — Measurement of quality in use
• AS ISO 14237:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
• AS ISO 18118:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

European Committee for Standardization (CEN), Homogeneous assay system

• EN ISO 186:2002 Paper and Board - Sampling to Determine Average Quality ISO 186:2002
• EN ISO 527-4:2023 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023)
• EN ISO 527-4:1997 Plastics - Determination of Tensile Properties - Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites ISO 527-4: 1997
• EN ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
• EN 14181:2014 Stationary source emissions - Quality assurance of automated measuring systems
• EN 14884:2005 Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
• EN 14181:2004 Stationary source emissions - Quality assurance of automated measuring systems
• EN 15267-4:2017 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
• EN ISO 1269:2006 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water)
• CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance
• EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
• EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
• PD CEN/TR 15729:2010 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles
• EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006)
• EN 15267-3:2007 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources

European Committee for Electrotechnical Standardization（CENELEC）, Homogeneous assay system

• EN 61280-2-11:2006 Fibre optic communication subsystem test procedures Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
• EN 62586-2:2017 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Homogeneous assay system

• GB/T 16920-2015 Determination of average linear thermal expansion coefficient of glass
• GB/T 16920-1997 Glass--Determination of coefficient of mean linear thermal expansion
• GB/T 27667-2011 Quality evaluation of optical systems.Determination of distortion
• GB/T 25144-2010 Method for determination of average linear thermal expansion coefficient of glass-lined glaze
• GB/T 17282-2012 Test method for estimation of mean relative molecular mass of petroleum oils from viscosity measurements
• GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)
• GB/T 20176-2006 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of boron atomic concentration in silicon using uniformly doped materials
• GB/T 5758-2001 Determination for particle size range,effective size and uniformity coefficient of ion exchange resins
• GB/T 11168-1989 Image quality of optical systems--Method of determination
• GB/T 11168-2009 Image quality of optical systems.Method of determination
• GB/T 5758-2023 Determination method of particle size, effective particle size and uniformity coefficient of ion exchange resin
• GB/T 24791.1-2009 Photography.Sensitometry of screen/film system for medical X-radiography.Part 1:Determination of sensitometric curce shape ,speed and average gradient
• GB/T 12727-2002 Nuclear power plants--Electrical equipment of the safety system-Qualification
• GB/T 10987-1989 Optical systems--Determination of parameters
• GB/T 10987-2009 Optical systems.Determination of parameters
• GB/T 5178-2008 Surface active agentsm-Determination of mean relative molecular mass for technical straight-chain sodium alkylbenzenesulfonates-- Gas-liquid chromatographic method
• GB/T 26141.1-2010 Non-destructive testing.Qualification of radiographic film digitisation systems.Part 1:Definitions,quantitative measurements of image quality parameters,standard reference film and qualitative control
• GB/T 24246-2009 Radioactive and special nuclear material monitoring systems
• GB/T 11890-1989 Water quality--Determination of benzene and its analogies--Gas chromatographic method

ES-UNE, Homogeneous assay system

• UNE-EN 61280-2-11:2006 Fibre optic communication subsystem test procedures -- Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring (Endorsed by AENOR in June of 2006.)
• UNE-EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
• UNE-EN 15267-4:2018 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
• UNE-ISO/IEC 25024:2023 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of data quality
• UNE-EN 62586-2:2017/A1:2021 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (Endorsed by Asociación Española de Normalización in December of 2021.)
• UNE-EN 62586-2:2017/AC:2018-09 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (Endorsed by Asociación Española de Normalización in October of 2018.)
• UNE-EN 62586-2:2017 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (Endorsed by Asociación Española de Normalización in October of 2017.)

Professional Standard - Light Industry, Homogeneous assay system

• QB/T 1321-2012 Test method for mean liner thermal expansion coefficient of ceramic material
• QB/T 1321-1991 Method for determination of average linear thermal expansion coefficient of ceramic materials
• QB/T 2345-2013 Determination of mean relative molecular weight of alkyldimethylbetain by GC
• QB/T 2345-1997 Determination of the Average Relative Molecular Mass of Fatty Alkyl Dimethyl Betaines by Gas-Liquid Chromatography

Group Standards of the People's Republic of China, Homogeneous assay system

• T/CFA 0106024-2021 Determination of the average grain size of cast aluminium silicon alloys
• T/GAPEC 018-2022 Specification for quality inspection of electric fixed wing UAV inspection system
• T/CAQI 169-2021 Water quality monitoring system of unmanned surface vehicle
• T/CWEC 21-2021
• T/CES 046-2020 Specification of magnetic circuit test system for magnetization critical current uniformity of high temperature superconducting tapes
• T/QGCML 2103-2023
• T/SSM 8-2022 Technical specifications for remote maintenance of water quality online monitoring system for fixed pollution sources
• T/CAQI 168-2020 Water quality monitoring system of inland water - Buoy type
• T/SDIRAA 032-2021 Ocean data quality control system test specification
• T/CIE 140-2022 Cloud Computing System and Service Quality Test Specification
• T/CAQI 101-2020 Coal laboratory information management system — General framework and system functions
• T/CWEC 13-2019 Technical guidelines for spectral on-line water quality monitoring system
• T/SDIOT 029-2022 Technical specification for hyperspectral intelligent monitoring water quality system
• T/QGCML 1618-2023 Technical Specifications for Internet of Vehicles Service Quality Detection System
• T/CNFAGS 6-2023

Lithuanian Standards Office , Homogeneous assay system

• LST EN 61280-2-11-2006 Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring (IEC 61280-2-11:2006)
• LST EN 14181-2015 Stationary source emissions - Quality assurance of automated measuring systems
• LST EN 14181-2004 Stationary source emissions - Quality assurance of automated measuring systems
• LST EN 14884-2006 Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
• LST EN ISO 9169:2007 Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006)
• LST EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
• LST EN 13284-2-2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
• LST ISO 10849:2001 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems
• LST EN 15267-3-2008 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources

NL-NEN, Homogeneous assay system

• NEN 1392-1964 Butyrometric determination of the fat content of homogenized milk and of milk, reconstituted from fat-containing dried milk

International Electrotechnical Commission (IEC), Homogeneous assay system

• IEC 61280-2-11:2006 Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
• IEC TR 62251:2003 Multimedia systems and equipment - Quality assessment - Audio-video communication systems
• IEC TS 63222-2:2023 Power quality management - Part 2: Power quality monitoring system
• IEC 61280-2-8:2021 Fibre optic communication subsystem test procedures - Part 2-8: Digital systems - Determination of low BER using Q-factor measurements
• IEC 60835-2-8:1993 Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 8: adaptive equalizer
• IEC 60780:1998 Nuclear power plants - Electrical equipment of the safety system - Qualification

US-AAMA, Homogeneous assay system

• AAMA 508-2014 Voluntary Test Method and Specification for Pressure Equalized Rain Screen Wall Cladding Systems

NEMA - National Electrical Manufacturers Association, Homogeneous assay system

• NEMA XR 17-1993 Test Standard for the Measurement of the Image Signal Uniformity of an X-Ray Image Intensifier System

PL-PKN, Homogeneous assay system

• PN Z04002 Arkusz 03-1974 Air purity protection Tests of dust physical properties Determination of average mass and average statical volumetric size of dust particles

IT-UNI, Homogeneous assay system

• UNSIDER 17-1956
• EC 1-2021 UNI CEI ISO/IEC 25024:2021 Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Measurement of data quality

ES-AENOR, Homogeneous assay system

• UNE 53-299 Pt.2-1985
• UNE 53-135-1991 Plastics. Homopolymer resins of vinyl chloride. Determination of volatil matter(including water)
• UNE 66-512-1991

American Society for Testing and Materials (ASTM), Homogeneous assay system

• ASTM D6922-11 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
• ASTM D6922-13 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
• ASTM D2884-93(2002) Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method
• ASTM E1360-05 Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
• ASTM E1360-05(2010) Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
• ASTM F2952-22 Standard Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold
• ASTM F2952-14 Standard Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold
• ASTM E1592-01 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
• ASTM E1592-98 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
• ASTM E1592-05(2012) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
• ASTM E1592-05 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
• ASTM E2101-14 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer

NZ-SNZ, Homogeneous assay system

• AS/NZS 1301.417S:2014 Methods of test for pulp and paper Part 417s: Sampling to determine average quality

ZA-SANS, Homogeneous assay system

• SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

Society of Automotive Engineers (SAE), Homogeneous assay system

• SAE AS9003-2001 Inspection and Test Quality System

SAE - SAE International, Homogeneous assay system

• SAE AS9003A-2012 Inspection and Test Quality System

National Metrological Verification Regulations of the People's Republic of China, Homogeneous assay system

• JJG 2053-1990 Verification Scheme of Measuring Instruments for Mass
• JJG(烟草) 28-2010 Verification regulations for microwave cigarette quality inspection system for cigarette making machines
• JJG(烟草)28-2010 Verification regulations for microwave cigarette quality inspection system for cigarette making machines
• JJG 2053-2006 Verification Scheme for Measuring Instruments of Mass
• JJG 2004-1987 Verification Scheme of Radiation Thermometers
• JJG(船舶) 15-1998 EMI test system verification regulations
• JJG(电子) 04054-1995 A360 Test System Verification Regulations

Natural Gas Processor's Association (NGPA), Homogeneous assay system

• GPA RR-39-1979 Equilibrium Phase Properties of Selected m-Xylene and Mesitylene Binary Systems: m-Xylene - Methane m-Xylene - Carbon Dioxide Mesitylene - Methane
• GPA RR-59-1982 Vapor-Liquid Equilibria Measurements on the Systems: N2-Toluene, N2-m-Xylene, and N2-Mesitylene

Military Standard of the People's Republic of China-General Armament Department, Homogeneous assay system

• GJB/J 3607-1999 Large quality standard system verification procedures

BELST, Homogeneous assay system

• STB GOST R 8.585-2004 State system for ensuring the uniformity of measurements.Thermocouples. Nominal static characteristics of conversion

Professional Standard - Post and Telecommunication, Homogeneous assay system

• YD/T 2367-2011 Technical requirements for IPTV quality monitoring systems
• YD/T 828.28-1996 Measuring method of equipments used in digital microwave transmission system Part 2 Measurement of terrestrial radio-relay systems Section 8: Adaptive equalizer

International Telecommunication Union (ITU), Homogeneous assay system

• ITU-T G.228-1993 MEASUREMENT OF CIRCUIT NOISE IN CABLE SYSTEMS USING A UNIFORM - SPECTRUM RANDOM NOISE LOADING
• ITU-T G.228 FRENCH-1993 MEASUREMENT OF CIRCUIT NOISE IN CABLE SYSTEMS USING A UNIFORM - SPECTRUM RANDOM NOISE LOADING
• ITU-T G.228 SPANISH-1993 MEASUREMENT OF CIRCUIT NOISE IN CABLE SYSTEMS USING A UNIFORM - SPECTRUM RANDOM NOISE LOADING
• ITU-T G.228-1988 Measurement of Circuit Noise in Cable Systems Using a Uniform-Spectrum Random Noise Loading - International Analogue Carrier Systems (Study Group XV) 11 pp

American National Standards Institute （ANSI), Homogeneous assay system

• ANSI/NAPM IT2.41-1997 Photography - Sensitometry of Screen/Film Systems for Medical Radiography - Part 1: Determination of Sensitometric Curve Shape, Speed and Average Gradient
• ANSI IT2.41-1997 Photography - Sensitometry of Screen/Film Systems for Medical Radiography - Part 1: Determination of Sensitometric Curve Shape, Speed and Average Gradient ANSI/ISO 9236-1-1996

CU-NC, Homogeneous assay system

• NC 93-01-33-1989 Standards System for Environment Protection. Hydrosphere. Determination of Volatile, Fixed and Total Wastes in Waters
• NC-ISO 9003:1995 Quality systems - Model for quality assurance in final inspection and test
• NC 96-00-05-1989 Standards System for Fire Protection. Determination of Combustibility of Solid Materials and Substances. Testing Methods
• NC 92-01-6-1988 Quality Control. Mutual Supply Production Certification and Quality Evaluation System Terms and Definitions

Tianjin Provincial Standard of the People's Republic of China, Homogeneous assay system

• DB12/ 097.3-1998 Regulations for quality inspection and evaluation of automatic fire protection systems Part 3: Regulations for quality inspection and evaluation of fire hydrant systems
• DB12/ 097.6-1998 Regulations for quality inspection and evaluation of automatic fire extinguishing systems Part 6: Regulations for quality inspection and evaluation of foam fire extinguishing systems
• DB12/ 097.7-1998 Regulations for quality inspection and evaluation of automatic fire protection systems Part 7: Regulations for quality inspection and evaluation of dry powder fire extinguishing systems
• DB12/ 097.5-1998 Regulations for quality inspection and evaluation of automatic fire extinguishing systems Part 5: Regulations for quality inspection and evaluation of gas fire extinguishing systems
• DB12/ 097.4-1998 Regulations for quality inspection and evaluation of automatic fire extinguishing systems Part 4: Regulations for quality inspection and evaluation of water spray fire extinguishing systems
• DB12/ 097.2-1998 Quality Inspection and Evaluation Regulations for Automatic Fire-fighting Systems Part 2: Quality Inspection and Evaluation Regulations for Automatic Sprinkler Systems
• DB12/ 097.8-1998 Automatic Fire Protection System Quality Inspection and Evaluation Regulations Part 8: Fire Linkage Control System Quality Inspection and Evaluation Regulations
• DB12/ 097.1-1998 Regulations for quality inspection and evaluation of automatic fire protection systems Part 1: Regulations for quality inspection and evaluation of automatic fire alarm systems

Professional Standard - Agriculture, Homogeneous assay system

• 空气和废气监测分析方法 3.4.4-2003 Part Three Air Quality Monitoring Chapter Four Air Quality Continuous Automatic Monitoring System (B) Four Air Quality Continuous Automatic Monitoring System Quality Assurance and Quality Control
• 空气和废气监测分析方法 3.4.6-2003 Part Three Air Quality Monitoring Chapter Four Air Quality Continuous Automatic Monitoring System (B) Sixth Air Quality Continuous Automatic Monitoring System Management
• 空气和废气监测分析方法 3.4.3-2003 Part Three Air Quality Monitoring Chapter Four Air Quality Continuous Automatic Monitoring System (B) Three Air Quality Continuous Automatic Monitoring System Composition
• 空气和废气监测分析方法 3.4.1-2003 Part Three Air Quality Monitoring Chapter Four Air Quality Continuous Automatic Monitoring System (B) - Overview of Air Quality Continuous Automatic Monitoring System
• 空气和废气监测分析方法 3.4.5-2003 Part Three Air Quality Monitoring Chapter Four Air Quality Continuous Automatic Monitoring System (B) Five Performance Review of Air Quality Continuous Automatic Monitoring System
• 水和废水监测分析方法 3.5.1-2003 Part Three Comprehensive Indicators and Inorganic Pollutants Chapter Five Water Quality Automatic Monitoring System - Surface Water Quality Automatic Monitoring System

国家市场监督管理总局、中国国家标准化管理委员会, Homogeneous assay system

• GB/T 7991.7-2019 Test method of viterous and porcelain enamels—Part 7：Determination of coefficient of mean lincar thermal expansion
• GB/T 25000.23-2019 Systems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 23: Measurement of system and software product quality
• GB/T 25000.20-2021 Systems and software engineering — Systems and software quality requirements and evaluation (SQuaRE) — Part 20:Quality measurement framework
• GB/T 25000.22-2019 Systems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 22: Measurement of quality in use
• GB/T 25000.21-2019 Systems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 21: Quality measure elements

Professional Standard - Electricity, Homogeneous assay system

• DL/T 1297-2013 Technical specification for power quality monitoring and management system
• DL/T 1198-2013 Regulations on power quality technical management for power system
• DL/T 1585-2016 Operation and maintenance specification for power quality monitoring system
• DL/T 1283-2013 Technical specification for lightning location and detection system in electric power systems

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Homogeneous assay system

• GB/T 34386-2017 Web-fed print quality inspection system
• GB/T 25000.24-2017 Systems and software engineering—Systems and software Quality Requirements and Evaluation(SQuaRE)—Part 24: Measurement of data quality

Hunan Provincial Standard of the People's Republic of China, Homogeneous assay system

• DB43/T 1482-2018 Forest Ecosystem Water Quality Observation Method

Liaoning Provincial Standard of the People's Republic of China, Homogeneous assay system

• DB21/T 1820-2010 Forest Ecosystem Water Quality Observation Method

TH-TISI, Homogeneous assay system

• TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
• TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
• TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles
• TIS 2250.2-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 2: universal calibration method

工业和信息化部, Homogeneous assay system

• YD/T 3873-2021 Internet service quality monitoring system testing method
• YD/T 3139-2016 Technical requirements for Internet service quality monitoring system

Sichuan Provincial Standard of the People's Republic of China, Homogeneous assay system

• DB51/T 2951-2022 Quality inspection and evaluation of hydrology and water resources information collection system in Sichuan Province

国家林业和草原局, Homogeneous assay system

• LY/T 3127-2019 Forestry application system quality control and testing

NO-SN, Homogeneous assay system

• NS-INSTA 800-2010 Cleaning quality - Measuring system for assessment and rating of cleaning quality

Professional Standard - Water Conservancy, Homogeneous assay system

• SL 694-2015 Code for quality evaluation of communication projects in water sector

Ningxia Provincial Standard of the People's Republic of China, Homogeneous assay system

• DB64/T 408-2017 Regulations for quality inspection and evaluation of gas fire extinguishing system
• DB64/T 409-2017 Regulations for quality inspection and evaluation of foam fire extinguishing system
• DB64/T 410-2017 Regulations for quality inspection and evaluation of water spray fire extinguishing system
• DB64/T 404-2017 Regulations for quality inspection and evaluation of fire linkage control system
• DB64/T 405-2017 Regulations for quality inspection and evaluation of automatic fire alarm system
• DB64/T 406-2017 Regulations for quality inspection and evaluation of automatic sprinkler system

水利部, Homogeneous assay system

• SL/T 694-2015 Water conservancy system communication engineering quality assessment procedures

GOSTR, Homogeneous assay system

• GOST R 8.703-2020 State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles

RO-ASRO, Homogeneous assay system

• STAS SR EN ISO 9003:1995 Quaiity systems - Model for quality assurance in final inspection and test

US-FCR, Homogeneous assay system

• FCR COE ETL 1110-3-399-1988 DATA TRANSMISSION MEDIA FOR ENERGY MONITORING AND CONTROL SYSTEMS AND INTRUSION DETECTION SYSTEMS
• FCR COE EM 1110-1-1003-2011 NAVSTAR Global Positioning System Surveying
• FCR COE EM 1110-1-1003-2003 NAVSTAR GLOBAL POSITIONING SYSTEM SURVEYING

BE-NBN, Homogeneous assay system

• NBN X 50-006-1988 Quality assurance - Requirements for measurement and calibration Systems

U.S. Air Force, Homogeneous assay system

• AIR FORCE A-A-59579-2004 TEST SET, FUEL CONTROL SYSTEM - AC/DC QUANTITY

Association of German Mechanical Engineers, Homogeneous assay system

• VDI 3950-2006 Stationary source emissions - Quality assurance of automated measuring and electronic data evaluation systems

International Commission on Illumination (CIE), Homogeneous assay system

• CIE 200-2011 CIE SUPPLEMENTARY SYSTEM OF PHOTOMETRY

Professional Standard - Nuclear Industry, Homogeneous assay system

• EJ/T 1073-1998 Standard guide for establishing a measurement system quality control program for chemical analysis and physical measurement laboratories within the nuclear industry

国家卫生计生委, Homogeneous assay system

• WS 582-2017 X, r-ray stereotactic radiotherapy system quality

中华人民共和国环境保护部, Homogeneous assay system

• GB 11890-1989 Water quality-Determination of benzene and its aualogies-Gas chromatographic method

Others:   Multi-sample rapid homogenization system, Multi-sample homogenization system, Determination of homogeneity and miscibility of automotive engine oils, homogeneous system, homogeneous system, Homogeneous assay system, Homogeneous assay system.