ZH
RU
ES

your indentation tester

your indentation tester, Total:357 items.

In the international standard classification, your indentation tester involves: Non-ferrous metals, Testing of metals, Mechanical testing, Plastics, Non-destructive testing, Applications of information technology, Reinforced plastics, Non-metalliferous minerals, Paints and varnishes, Paper and board, Non-textile floor coverings, Ceramics, Electricity. Magnetism. Electrical and magnetic measurements, Semi-manufactures of timber, Electrical and electronic testing, Glass, Insulating fluids, Measurement of force, weight and pressure, Petroleum, petroleum products and natural gas handling equipment, Construction materials, Continuous handling equipment, Power transmission and distribution networks, Electrical accessories, Powder metallurgy, Nuclear energy engineering, Installations in buildings, Rubber, Road engineering, Products of the textile industry, Protection against electric shock, Analytical chemistry, Linear and angular measurements, Surface treatment and coating, Test conditions and procedures in general, Earthworks. Excavations. Foundation construction. Underground works, Transformers. Reactors, Power stations in general, Wood, sawlogs and sawn timber, Materials for aerospace construction, Environmental testing, Equipment for petroleum and natural gas industries, Freight distribution of goods, Metrology and measurement in general, Thermodynamics and temperature measurements, Petroleum products in general, Cellular materials, Fluid storage devices, Packaging and distribution of goods in general.

American Society for Testing and Materials (ASTM), your indentation tester

ASTM B648-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E2546-15(2023) Standard Practice for Instrumented Indentation Testing
ASTM B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM B647-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D2583-07 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D643-97 Standard Test Method for Folding Endurance of Paper by the Schopper Tester
ASTM D643-97(2002) Standard Test Method for Folding Endurance of Paper by the Schopper Tester
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM F1914-17 Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM B648-10(2015)e1 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B724-00 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM E384-08 Standard Test Method for Microindentation Hardness of Materials
ASTM E103-12 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E103-84(1996) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E103-84(2002) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM C730-98(2013) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM E2347-05 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E2347-04 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM D2583-06 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM F2749-09 Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Assembly
ASTM B933-20 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
ASTM E2347-16 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM B647-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM E2347-21 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM F2939-13(2019) Standard Specification for High Voltage Phasing Testers
ASTM F2939-13 Standard Specification for High Voltage Phasing Testers
ASTM F2939-13(2019)e1 Standard Specification for High Voltage Phasing Testers
ASTM F1710-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1710-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM C661-98 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C661-06 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C661-06(2011) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM A833-17 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D2583-95(2001)e1 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-95 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM C661-15(2022) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM A833-19 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM B647-10(2016) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM E110-82(2002) Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM E110-82(1997)e2 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM B647-84(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM D3120-96(2002)e1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D3120-96 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D6264/D6264M-07 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM E110-10 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM D6264/D6264M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM C661-15 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM D5672/D5672M-22 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique

British Standards Institution (BSI), your indentation tester

BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN ISO 14577-1:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 2815:2003 Paints and varnishes — Buchholz indentation test
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-2:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN 16094:2012 Laminate floor coverings. Test method for the determination of micro-scratch resistance
BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN 1534:2020 Wood flooring and parquet. Determination of resistance to indentation. Test method
BS EN ISO 14577-4:2016 Tracked Changes. Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS 3900-E12.2:2000 Methods of test for paints - Determination of Knoop hardness by measurement of the indentation depth
19/30388218 DC BS EN 1534. Wood flooring. Determination of resistance to indentation (Brinell). Test method
BS ISO 23586:2022 Conveyor belts. Indentation rolling resistance related to belt width. Requirements and testing
BS IEC/IEEE 62582-2:2022 Tracked Changes. Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Indenter measurements
21/30412527 DC BS ISO 23586. Conveyor belts. Indentation rolling resistance related to belt width. Requirements, testing
BS 3900-E12.1:2000 Methods of test for paints - Determination of Knoop hardness by measurement of the indentation length using a microscope
BS ISO 7619-2:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. IRHD pocket meter method
BS EN 12697-21:2020 Tracked Changes. Bituminous mixtures. Test methods. Indentation using plate specimens
BS 903-A57:1997 Physical testing of rubber - Determination of indentation hardness by means of pocket hardness meters
BS EN 61083-1:2001 Digital recorders for measurements in high-voltage impulse tests. Requirements for instruments
BS DD CEN/TS 1071-7:2003 Advanced technical ceramics. Methods of test for ceramic coatings. Determination of hardness and Young's modulus by instrumented indentation testing
BS EN 59:2016 Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester
BS EN 4864:2020 Aerospace series. Environmental testing. High dynamic abrasion, mar, scratch and punch test in cabin interior
18/30382710 DC BS EN 12697-21. Bituminous mixtures. Test methods. Part 21. Indentation using plate specimens
19/30394128 DC BS EN 13523-6. Coil coated metals. Test methods. Part 6. Adhesion after indentation (cupping test)
BS EN 12697-20:2020 Tracked Changes. Bituminous mixtures. Test methods. Indentation using cube or Marshall specimens
18/30382722 DC BS EN 12697-20. Bituminous mixtures. Test methods. Part 20. Indentation using cube or Marshall specimens

工业和信息化部/国家能源局, your indentation tester

JB/T 12721-2016 Technical specifications for in-situ nanoindentation/scratch tester for solid materials
JB/T 13225-2017 In-situ tensile-indentation composite mechanical property testing system for solid materials

International Organization for Standardization (ISO), your indentation tester

ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO/DTS 19096 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO/TS 19096:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO/CD 14577-1:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14577-2:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
ISO/CD 14577-2:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
ISO/CD 14577-3:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 7619-2:2004 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method

Korean Agency for Technology and Standards (KATS), your indentation tester

KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS B ISO 14577-1-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 1：Test method
KS B 0951-2008(2018) Instrumented indentation tests on welds in steel－Measurement of residual stress on welded joints
KS L 1208-2005 TESTING METHOD FOR KNOOP INDENTATION HARDNESS OF CERAMIC WHITEWARES
KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
KS B ISO 14577-2:2004 Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS B ISO 14577-2-2004(2009) Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS B ISO 14577-2:2017 Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS L ISO 9385-2010(2020) Testing method for knoop indentation hardness of glass and glass-ceramics
KS L 2102-2000 Testing method for knoop indentation hardness of glass and glass-ceramics
KS L 2102-1980 Testing method for knoop indentation hardness of glass and glass-ceramics
KS B ISO 14577-3-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS B ISO 14577-3:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:Calibration of reference blocks
KS B ISO 14577-3:2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS D ISO 14577-4-2011(2021) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2011(2016) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS C IEC 61083-1-2006(2016) Instruments and software used for measurements in high-voltage impulse tests Part 1：Requirements for instruments
KS C IEC 61083-1-2006(2021) Instruments and software used for measurements in high-voltage impulse tests Part 1：Requirements for instruments
KS T ISO 12048:2020 Packaging — Complete, filled transport packages —Compression and stacking tests using a compression tester
KS C IEC 61083-1:2006 Instruments and software used for measurement in High-voltage impulse tests－Part 1：Requirements for instruments
KS B 5648-2002(2017) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, your indentation tester

GB/T 22458-2008(英文版) General rules of instrumented nanoindentation test
GB/T 25898-2010(英文版) Instrumented nanoindentation test—Indentation hardness and modulus of thin film
GB/T 32192-2015 Withstanding voltage tester
GB/T 21838.1-2008 Metallic materials.Instrumented indentation test for hardness and materials parameters.Part 1:Test method
GB/T 22067.2-2008 Instrumented indentation tests for hardness and material parameters of metallic materials - Part 2: Inspection and calibration of testing machines
GB/T 21838.2-2008 Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2: Verification and calibration of testing machines
GB/T 22067.3-2008 Instrumented indentation tests for hardness and material parameters of metallic materials - Part 3: Calibration of standard blocks
GB/T 21838.3-2008 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:calibration of reference blocks
GB/T 37782-2019(英文版) "Metallic materials—Indentation test—Determination of strength,hardness and stressstrain curve"
GB/T 10261-1988 Test procedures for stabilized d.c high/low voltage power for nuclear instruments
GB/T 21838.4-2008 Metallic materials.Instrumented indentation test for hardness and materials Parameters.Part 4:Test method for metallic and non-metallic coatings
GB/T 6587.8-1986 Line frequency and voltage tests for electronic measuring instruments

European Committee for Standardization (CEN), your indentation tester

CWA 17552-2020 Engineering materials - Electronic data interchange - Instrumented indentation test data
CWA 17552:2020 Engineering materials - Electronic data interchange - Instrumented indentation test data
prEN ISO 14577-1 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
EN 837-1:1996 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
EN 16094:2012 Laminate floor coverings - Test method for the determination of micro-scratch resistance
EN 16094:2021 Laminate floor coverings - Test method for the determination of micro-scratch resistance
PD CEN/TS 1071-7:2003 Advanced technical ceramics Methods of test for ceramic coatings Part 7: Determination of hardness and Young磗 modulus by instrumented indentation testing
CEN EN 13523-6-2002 Coil Coated Metals - Test Methods - Part 6: Adhesion After Indentation (Cupping Test)
prEN ISO 14577-2 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
prEN ISO 14577-3 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
EN 16974:2016 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing

American National Standards Institute （ANSI), your indentation tester

ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ANSI/ASTM E103:1984 Method for Rapid Indentation Hardness Testing of Metallic Materials
ANSI C12.9-2005 Test Switches for Transformer-Rated Meters
ANSI/IEEE C57.13.2:2005 Standard Conformance Test Procedure for Instrument Transformers

(U.S.) Ford Automotive Standards, your indentation tester

FORD FLTM EU-BO 054-1-2001 INDENTATION HARDNESS TEST FOR PLASTICS
FORD FLTM BO 111-1-2001 INDENTATION TEST FOR CRASH PADS (Replaces FLTM BO 011-01)
FORD FLTM BO 111-2-2001 TEST FOR INDENTATION AND RECOVERY (Replaces FLTM BO 011-02, FLTM EU-BN 020-01, FLTM EU-BO 011-02)

SE-SIS, your indentation tester

SIS 92 35 05-1974 Floorings. Determination of indentation. Short-time test
SIS SS 92 35 06-1984 Floorings - Determination of indentation - Long-time test
SIS SS-ISO 2815:1989 Paints and varnishes — Buchholz indenta- tion test
SIS SS 428 91 05-1982 Portable single pole voltage testers for 3,6 - 420 kV h/g hes t system voltage - Design and testing
SIS SS 428 91 05-1985 Portable single po/e voltage testers for 3,6 - 420 kV highest system voltage - Design and testing

CZ-CSN, your indentation tester

CSN 67 3074-1985 Paints and varnishes. Indentation test
CSN 72 2348-1983 Testing of caulking compounds for building purposes. Indentation hardness of elastomeric sealants by means of durometer by Shore a
CSN 25 0251-1984 Tensile testing machines and presses. Technical requirements and verification
CSN 35 9736 Za-1980
CSN 35 6858-1976 Instruments with piezoelectric pick-ups for service vibratlon measurement. Metrologic testing

Danish Standards Foundation, your indentation tester

DS 1097.5:1975 Floorings. Determination of indentation. Short-time test
DS/EN 59:1978 Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor
DS/EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method
DS/EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
DS/EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
DS/EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
DS/EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
DS/EN ISO 22282-5:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests
DS/EN ISO 12048:2001 Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester
DS/EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments

Lithuanian Standards Office , your indentation tester

LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
LST EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
LST EN 1534-2011 Wood flooring - Determination of resistance to indentation - Test method
LST EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002)
LST EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015)
LST EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002)
LST EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002)
LST EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007)
LST EN 61083-1-2002 Instruments and software used for measurements in high- voltage impulse tests. Part 1: Requirements for instruments (IEC 61083-1:2001)
LST EN ISO 22282-5:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests (ISO 22282-5:2012)
LST EN ISO 12048:2001 Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994)

Association Francaise de Normalisation, your indentation tester

NF EN ISO 2815:2003 Peintures et vernis - Essais d'indentation Buchholz
NF A03-155-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.
NF EN 4864:2020 Série aérospatiale - Essais d'environnement - Essai haute dynamique d'abrasion, d'éraflure, de rayure et de poinçonnage en cabine intérieure
NF A03-155-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines.
NF A03-155-1*NF EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method
NF A03-155-3*NF EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks
NF A03-155-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks.
NF B53-646*NF EN 1534:2020 Wood flooring and parquet - Determination of resistance to indentation - Test method
NF A03-155-2*NF EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines
NF EN 50289-3-11:2001 Câbles de communication - Specifications des méthodes d'essai - Partie 3-11 : méthodes d'essais mécaniques - Résistance à l'enfoncement du câble
NF A03-155-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings.
NF T47-127*NF EN 16974:2016 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing
NF A03-155-4*NF EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings
NF C41-105*NF EN 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1 : requirements for instruments
NF EN 61083-1:2001 Appareils et logiciels utilisés pour les mesures pendant les essais de choc à haute tension - Partie 1 : prescriptions pour les appareils
NF EN 16974:2016 Courroies transporteuses - Résistance au roulement par suite d'enfoncement relative à la largeur de courroie - Exigences, essais
NF EN 772-2/A1:2005 Méthodes d'essai des éléments de maçonnerie - Partie 2 : détermination du pourcentage de vides dans les éléments de maçonnerie (par empreinte sur papier)

German Institute for Standardization, your indentation tester

DIN 1996-13:1984-07 Testing of asphalt; indentation testing using a flat-ended indentor pin
DIN 51917:2002-12 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
DIN 53579:2015-04 Testing of flexible cellular materials - Indentation test on finished parts
DIN EN ISO 2815:2003-10 Paints and varnishes - Buchholz indentation test (ISO 2815:2003); German version EN ISO 2815:2003
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN EN ISO 14577-1:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN EN 1534:2020-03 Wood flooring and parquet - Determination of resistance to indentation - Test method; German version EN 1534:2020
DIN EN 837-1:1997 Pressure gauges - Part 1: Bourdon tube pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-1:1996
DIN EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002); German version EN ISO 14577-2:2002
DIN EN 1534:2020 Wood flooring and parquet - Determination of resistance to indentation - Test method
DIN EN 16974:2016-11 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing; German version EN 16974:2016
DIN EN ISO 14577-2:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015); German version EN ISO 14577-2:2015
DIN EN ISO 14577-3:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
DIN EN ISO 14577-4:2017-04 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016); German version EN ISO 14577-4:2016
DIN EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007); English version of DIN EN ISO 14577-4:2007-08
DIN EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001); German version EN 61083-1:2001
DIN EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN EN ISO 12048:2001-04 Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994); German version EN ISO 12048:2000
DIN EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015); German version EN ISO 14577-2:2015

Indonesia Standards, your indentation tester

SNI 13-6176-1999 Determination of hardness index of rock by indentation test
SNI 19-6463-2000 Method for calibration of bourdon manometers by dead weight tester

未注明发布机构, your indentation tester

DIN EN ISO 3678:1995 Varnishes and paints test for imprint resistance

国家市场监督管理总局、中国国家标准化管理委员会, your indentation tester

GB/T 39635-2020 Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test
GB/T 1927.18-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation

AENOR, your indentation tester

UNE-EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
UNE-EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method
UNE-EN 61083-1:2002 Instruments and software used for measurement in high-voltage impulse tests -- Part 1: Requirements for instruments.
UNE-EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)
UNE 103602:1996 TEST METHOD FOR ONE-DIMENSIONAL SWELL PRESSURE OF A SOIL IN CONSOLIDOMETER.
UNE-EN ISO 22282-5:2014 Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests (ISO 22282-5:2012)
UNE-EN ISO 12048:2001 Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester. (ISO 12048:1994)

ZA-SANS, your indentation tester

SANS 14577-1:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 1: Test method
SANS 14577-3:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks
SANS 14577-2:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines
SANS 5266:2005 Water resistance of textile fabrics: Variable head test

National Metrological Verification Regulations of the People's Republic of China, your indentation tester

JJG 795-2016 Withstanding Voltage Testers
JJG 795-2004 Withstanding Voltage Testers
JJG 795-1992 Verification Regulation of Withstanding Voltage Tester
JJG(民航) 026-1996 Verification Regulation of 1811D Pitot-static Test Set
JJG 1126-2016 High Voltage Dielectric Loss Tester
JJG 1137-2017 High Voltage Relative Dielectric Loss and Capacitance Testers
JJG(电子) 04013-1988 BJ2912 (QE7) Zener diode tester trial verification regulations
JJG(民航) 0096-2006 Verification Regulation of Model 682003006/7/8 Ground Check Electrical Unit
JJG 1120-2015 Verification regulations for high voltage switch action characteristic tester
JJG(烟草) 02-2014 Calibration rules for cigarette draw resistance and filter rod pressure drop tester
JJG(烟草)02-2014 Calibration rules for cigarette draw resistance and filter rod pressure drop tester
JJG(电子) 04007-1987 BJ2950A (JS-4A) Transistor Working Voltage Tester Trial Verification Regulations

CEN - European Committee for Standardization, your indentation tester

EN ISO 14577-2:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
PREN 1534-2019 Wood flooring - Determination of resistance to indentation (Brinell) - Test method

RU-GOST R, your indentation tester

GOST R 56232-2014 Determination of ?stress-strain? diagram in the course of ball instrumental indentation. General requirements
GOST R 8.748-2011 State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 1. Test method
GOST R ISO 7619-2-2009 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 2. IRHD pocket meter method of measurement
GOST R 8.904-2015 State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2. Verification and calibration of testing machines
GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness

Professional Standard - Electricity, your indentation tester

DL/T 2220-2021 Technical regulations for instrumented indentation method testing of mechanical properties of metal materials in power stations
DL/T 1694.4-2017 Calibration specification for high voltage testing instruments and equipment Part 4: Insulating oil withstand voltage tester
DL/T 1694.3-2017 Calibration specification for high-voltage testing instruments and equipment Part 3: High-voltage switch action characteristic tester
DL/T 1694.2-2017 Calibration specification for high-voltage testing instruments and equipment Part 2: Power transformer tap-changer tester
DL/T 963-2005 General technical specifications of the transformation ratio tester
DL/T 1952-2018 Calibration specification for transformer winding deformation tester
DL/T 846.3-2004 General technical specifications for high voltage test equipments Part 3: high voltage switch integrate detector
DL/T 962-2005 General technical specifications of the high voltage dieletric loss detector
DL/T 1305-2013 General technical specification for transformer oils dissipation factor tester
DL/T 1694.5-2017 Calibration specifications for high-voltage testing instruments and equipment Part 5: Zinc oxide arrester resistive current tester
DL/T 1694.6-2020 Calibration specifications for high-voltage testing instruments and equipment Part 6: Ultra-low frequency dielectric loss tester for power cables
DL/T 1951-2018 General technical requirements for transformer winding deformation tester
DL/T 846.3-2017 General technical requirements for high-voltage test equipment Part 3: High-voltage switch comprehensive characteristic tester
DL/T 1400.3-2023
DL/T 1152-2012 General technical specification of secondary loop voltage drop testers of voltage transformer
DL/T 1256-2013 General specification of transformer tester for no-load loss and load loss
DL/T 846.12-2016 General Specifications for High Voltage Test Equipment Part 12: Power Capacitance Tester
DL/T 846.13-2020 General Specifications for High Voltage Test Equipment Part 13: Arrester Monitor Testers

ES-UNE, your indentation tester

UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
UNE-EN ISO 14577-1:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
UNE-EN 1534:2021 Wood flooring and parquet - Determination of resistance to indentation - Test method
UNE-EN 16974:2016 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing (Endorsed by AENOR in November of 2016.)
UNE-EN 13523-6:2021 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
UNE-EN ISO 14577-2:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015)
UNE-EN 12697-21:2022 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens

AT-ON, your indentation tester

ONORM C 9433 Teil.1-1982 Testing of elastomers; determination of ball indentation hardness (IRHD) of soft rubber
ONORM E 1364-1971 Apparatus for pressure lest on shrouds.
ONORM C 9433 Teil.2-1982 Testing of elastomers; determination of ball indentation hardness (IRHD) of soft rubber; nricro hardness fest

Group Standards of the People's Republic of China, your indentation tester

T/HDGXH 034-2023 Laser ranging method for high-temperature pressure indentation testing of wire and cable insulation and sheath
T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
T/CEC 354-2020 General technical requirements for transformer low-voltage short-circuit impedance tester

Professional Standard - Electron, your indentation tester

SJ/T 11384-2008 General specification of withstanding voltage tester

Professional Standard - Machinery, your indentation tester

JB/T 7440-1994 Die-casting technique parameter tester

PL-PKN, your indentation tester

PN P04605-04-1992 Wear test of textile clothing articles Determination of durability of pressed creases
PN S76008-1990 Measuring instruments for motor vehicles and tractors Manometers Re?uirements and test

Professional Standard - Ferrous Metallurgy, your indentation tester

YB/T 4285-2012 Standard test method for indentation hardness of metallic materials by portable hardness testers

国家能源局, your indentation tester

SY/T 4113.6-2019 Test methods for performance of pipeline anti-corrosion coatings Part 6: Indentation hardness test

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, your indentation tester

GJB/J 5415-2005 Verfication regulation for withstanding voltage tester

BELST, your indentation tester

STB 2495-2017 Non-destructive testing. Determination of physical and mechanical properties of structural materials by indentation methods

YU-JUS, your indentation tester

JUS N.A5.544-1989 Bigh-voltage test technicpies. Application gui?e for measuring ?evices
JUS N.H9.100-1984 Instrument transformers. Measurements ofpartial discharges

Canadian Standards Association (CSA), your indentation tester

CSA C22.2 NO.160-2015 Voltage and Polarity Testers (Third Edition)

CN-STDBOOK, your indentation tester

图书 A-4743 Detection technology and application of withstand voltage tester

NO-SN, your indentation tester

NS 4000-1967 Pressure test of plastic bags by the use of the EPPT-tester

Professional Standard - Aviation, your indentation tester

HB 6136.4-1987 Flight Test Instrument (Static) Calibration Specification Stress

Professional Standard - Energy, your indentation tester

DL/T 1694.9-2021 Calibration specification for high voltage testing instruments and equipment Part 9: Empty and load loss tester for power transformers
DL/T 1694.8-2021 Calibration specification for high voltage testing instruments and equipment Part 8: Power capacitance and inductance tester

National Electrical Manufacturers Association（NEMA), your indentation tester

NEMA C12.9-2005 Test Switches for Transformer-Rated Meters
NEMA C12.9-1993 Test Switches for Transformer-Rated Meters R(1999)
NEMA C12.9-2014 Test Switches and Plugs for Transformer-Rated Meters

National Metrological Technical Specifications of the People's Republic of China, your indentation tester

JJF 1378-2012 Program of Pattern Evaluation of Withstanding Voltage Testers
JJF(机械) 1018-2018 Calibration specification for winding turn-to-turn withstand voltage tester
JJF(机械)1018-2018 Calibration specification for winding turn-to-turn withstand voltage tester
JJF(机械) 074-2009 Calibration specification for high voltage switch mechanical characteristic tester
JJF 1619-2017 Calibration Specification for Testing Instrument of Transformer Secondary Loop Voltage Drops and Loads

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., your indentation tester

IEEE C12.9-1987 TEST SWITCHES FOR TRANSFORMER-RATED METERS
IEEE C12.9-1982 TEST SWITCHES FOR TRANSFORMER-RATED METERS
IEEE C57.13.2-1986 STANDARD CONFORMANCE TEST PROCEDURES FOR INSTRUMENT TRANSFORMERS
IEEE 75-1958 Proposed Test Code for POWER-FACTOR TESTING OF MINERAL-OIL-INSULATED INSTRUMENT TRANSFORMERS

U.S. Air Force, your indentation tester

AIR FORCE A-A-59480-2004 TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE (DIGITAL OR DEADWEIGHT)
AIR FORCE A-A-59480 VALID NOTICE 1-2012 Tester, Pressure Gage, Hydraulic, Portable (Digital or Deadweight)

Malaysia Standards, your indentation tester

MS 133 Pt.E12-2000 Methods of test for paints and varnishes:Part E12:Indentation test (Spherical or pyramidal)(ISO 6441:1984,MOD)

American Society of Mechanical Engineers (ASME), your indentation tester

ASME SEC VIII D3 ART KT-4-2001 Article KT-4 Pressure Test Gages and Transducers

JP-JEC, your indentation tester

JEC 0221-2007 INSTRUMENTS USED FOR MEASUREMENTS IN IMPULSE VOLTAGE AND CURRENT TESTS Requirement for instruments

Standard Association of Australia （SAA）, your indentation tester

AS 61083.1:2006 Instruments and software used for measurement in high-voltage impulse tests - Requirements for instruments
AS 1334.13:2017 Methods of testing conveyor and elevator belting, Method 13: Determination of indentation rolling resistance of conveyor belting
AS/NZS 3572.22:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of hardness by means of a Barcol impressor

Japanese Industrial Standards Committee (JISC), your indentation tester

JIS C 1731-2:1998 Instrument transformers for testing purpose and used with general instrument Part 2: Voltage transformers
JIS R 1760:2016 Test method for fracture resistance of fine ceramics at room temperature by indentation fracture (IF) method
JIS C 1731-1:1998 Instrument transformers for testing purpose and used with general instrument Part 1: Current transformers

Hubei Provincial Standard of the People's Republic of China, your indentation tester

DB42/T 397-2006 Verification Criterion of Meter for Testing voltage drop of voltage transformer secondary cicuit

HU-MSZT, your indentation tester

MSZ KGST 2566-1980

Professional Standard - Petroleum, your indentation tester

SY/T 6865-2012 Calibration method of mid-pressure drilling fluid filter press
SY 6865-2012 Calibration method of pressure filtration loss tester in drilling fluid
SY/T 7074-2016 Calibration method of HTHP drilling fluid filter press
SY 7074-2016 Calibration method of high temperature and high pressure fluid loss tester for drilling fluid

CN-QIYE, your indentation tester

Q/GDW 653-2011 Calibration specification for transformer empty and load loss tester

IN-BIS, your indentation tester

IS 13360 Pt.5/Sec.12-1992

KR-KS, your indentation tester

KS T ISO 12048-2020 Packaging — Complete, filled transport packages —Compression and stacking tests using a compression tester

CENELEC - European Committee for Electrotechnical Standardization, your indentation tester

EN 61083-1:1993 Digital recorders for measurements in high-voltage impulse tests Part 1: Requirements for digital recorders

International Electrotechnical Commission (IEC), your indentation tester

IEC 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments
IEC 61083-1:2021 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests

Military Standard of the People's Republic of China-General Armament Department, your indentation tester

GJB 570.7-1988 Typical test methods for meteorological instruments - barometric pressure measurement sensors

The American Road & Transportation Builders Association, your indentation tester

AASHTO T 217-2002(R2006) Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
AASHTO T 217-2013 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
AASHTO T 217-2014 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester

AASHTO - American Association of State Highway and Transportation Officials, your indentation tester

T 217-2014 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
T 217-1987 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
T 217-2002 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
T 217-2013 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester