ZH
RU
ES

Micrometer

Micrometer, Total:497 items.

In the international standard classification, Micrometer involves: Pharmaceutics, Testing of metals, Ferrous metals, Cutting tools, Pesticides and other agrochemicals, Particle size analysis. Sieving, Products of the chemical industry, Paint ingredients, Air quality, Non-ferrous metals, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Extraction and processing of petroleum and natural gas, Analytical chemistry, General methods of tests and analysis for food products, Animal feeding stuffs, Powder metallurgy, Fertilizers, Ceramics, Chipless working equipment, Linear and angular measurements, Geology. Meteorology. Hydrology, Environmental testing, Water quality, Ferroalloys, Terminology (principles and coordination), Plastics, Cereals, pulses and derived products, Tobacco, tobacco products and related equipment, Equipment for the paper industry, Metrology and measurement in general, Measurement of volume, mass, density, viscosity, Radiocommunications, Power stations in general, Non-metalliferous minerals, Vocabularies, Road vehicle systems, Fluid power systems, Lubricants, industrial oils and related products, Welding, brazing and soldering, Paper and board, Refractories, Non-textile floor coverings, Iron and steel products, Gas and steam turbines. Steam engines, Metalliferous minerals, Materials for the reinforcement of composites, Electricity. Magnetism. Electrical and magnetic measurements, Fuels, Raw materials for rubber and plastics, Cork and cork products, Continuous handling equipment, Coals, Farming and forestry, Sugar. Sugar products. Starch, Occupational safety. Industrial hygiene, Diagnostic, maintenance and test equipment, Test conditions and procedures in general.

YU-JUS, Micrometer

JUS K.F0.005-1989 Gralns of fused alumiuium oxide and silicon carbide for boodod abrasivc products. Particle si?e measurement of microgrfts by Eppendorf - photosedimentometer
JUS H.P5.011-1991 Testing of pesticides.Dusts,granules,microgranules and water-dispersible powder.Determination of bulk density
JUS H.B8.817-1992 Straight ammonium nitrate fertilizers of high nitrogen content - Determination of the particle size (granulometry)
JUS U.B1.018-1980 Testing ofsoils. Determination ofparticle si?e distribution
JUS B.B8.036-1982 Crushed aggregate. Determination of fine particles with the wet sieve analysis
JUS C.A3.004-1985 Micrographic determination ofthe ferrftic or austenitic grain sfzo ofsteels
JUS B.B8.105-1984 Testing of mineral filher. The deter,omatopm of grain sin distribution

Professional Standard - Machinery, Micrometer

JB/T 20156-2013 Particle counter
JB/T 3168.2-1999 Alloy powder for welding.Determination of hardness and partcle size
JB/T 9591.3-2015 Gas turbine.Cleanliness verifing for oil system.Measuring particulate contaminant in oil by microscopic counting method
JB/T 9591.3-1999 Cleanliness test for oil system of gas turbine measuring solid particle contaminant in oil liquid by microscopic counting method
JB/T 9014.3-1999 Continuous handling equipment.Loose bulk material.Determination of composition of size and pellet

Japanese Industrial Standards Committee (JISC), Micrometer

JIS G 0551:2005 Steels -- Micrographic determination of the apparent grain size
JIS G 0551:2013 Steels.Micrographic determination of the apparent grain size
JIS G 0551:2020 Steels -- Micrographic determination of the apparent grain size
JIS R 6001-2:2017 Bonded abrasives -- Determination and designation of grain size distribution -- Part 2: Microgrits
JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
JIS G 1641:1985 Methods of sampling for size analysis of ferroalloys and size determination
JIS B 9920:1989 Measuring methods for airborne particles in clean room and evaluating methods for air cleanliness of clean room
JIS G 1641:1998 Methods of sampling for size analysis of ferroalloys and size determination
JIS K 0970:1989 Piston operated micro-volumetric apparatus
JIS K 0801:1986 Continuous turbidimeter
JIS K 0971:1989 Calibration methods for micro-volumetric apparatus
JIS Z 2510:2022 Metallic powders -- Determination of particle size by dry sieving
JIS Z 3930:2001 Determination of emission rate of particulate fume in arc welding
JIS Z 7152:2013 Determination of PM10/PM2.5 mass concentration in flue gas by use of virtual impactors
JIS B 9930:2000 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using a microscope
JIS M 8706:1996 Iron ores -- Determination of size distribution by sieving
JIS Z 8822:2001 Determination of particle size distribution by the mass of sediment-particles in liquid
JIS M 8718:2000 Iron ore pellets -- Determination of crushing strength
JIS M 8718:2009 Iron ore pellets -- Determination of crushing strength
JIS G 0551:1998 Methods of austenite grain size determination for steel
JIS G 0552:1998 Methods of ferrite grain determination test for steel
JIS Z 8832:2010 Determination of particle size distributions -- Electrical sensing zone method
JIS B 9930:2006 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope

National Metrological Technical Specifications of the People's Republic of China, Micrometer

JJF 1290-2011 Calibration Specification for Particulate Analyzer
JJF(机械) 1075-2021 Calibration specification for single particle compressive strength tester
JJF(机械)1075-2021
JJF 1714-2018 Program of Pattern Evaluation of Low-level Dissolved Oxygen Meters
JJF(纺织) 030-2006 Specifications for Calibration of Whiteness Meter
JJF(机械) 047-2009 Calibration specification for particle size composition determination device

British Standards Institution (BSI), Micrometer

BS ISO 6344-3:2021 Coated abrasives. Determination and designation of grain size distribution - Microgrit sizes P240 to P5000
BS 4490:1989 Methods for micrographic determination of the grain size of steel
BS EN ISO 643:2012 Steels. Micrographic determination of the apparent grain size
BS ISO 15900:2020 Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
21/30400913 DC BS ISO 6344-3. Coated abrasives. Determination and designation of grain size distribution. Part 3. Microgrit sizes P240 to P5000
BS ISO 21501-1:2009 Determination of particle size distribution - Single particle light interaction methods - Light scattering aerosol spectrometer
19/30370177 DC BS ISO 15900. Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
BS ISO 13383-1:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of grain size and size distribution
BS ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Microgrits
BS ISO 8486-2:2007 Bonded abrasives - Determination and designation of grain size distribution - Microgrits F230 to F2000
BS ISO 13067:2011 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS EN ISO 643:2020 Steels. Micrographic determination of the apparent grain size
BS ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Macrogrits
BS ISO 6344-2:2021 Coated abrasives. Determination and designation of grain size distribution - Macrogrit sizes P12 to P220
BS ISO 6344-3:2013 Coated abrasives. Grain size analysis. Determination of grain size distribution of microgrits P240 to P2500
BS ISO 9136-1:2004 Abrasive grains. Determination of bulk density - Macrogrits
BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
BS ISO 16232-8:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle nature determination by microscopic analysis
BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
BS EN ISO 28439:2011 Workplace atmospheres. Characterization of ultrafine aerosols/nanoaerosols. Determination of the size distribution and number concentration using differential electrical mobility analysing systems
BS EN ISO 4497:2020 Metallic powders. Determination of particle size by dry sieving
BS ISO 18747-2:2019 Determination of particle density by sedimentation methods - Multi-velocity approach
BS ISO 8511:2011 Rubber compounding ingredients. Carbon black. Determination of pellet size distribution
BS ISO 14966:2019 Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS ISO 6344-2:1998 Coated abrasives - Grain size analysis - Determination of grain size distribution of macrogrits P12 to P220
BS ISO 13319:2007 Determination of particle size distributions. Electrical sensing zone method
21/30395144 DC BS ISO 8840. Refractory materials. Determination of bulk density of granular materials (grain density)
BS ISO 21501-3:2007 Determination of particle size distribution. Single particle light interaction methods. Light extinction liquid-borne particle counter
BS ISO 18747-1:2018 Determination of particle density by sedimentation methods - Isopycnic interpolation approach
17/30363662 DC BS EN ISO 643 Steels. Micrographic determination of the apparent grain size
BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution. Method by image analysis for large dimension particles
BS EN ISO 7837:2001 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers
BS EN ISO 7837:1992 Fertilizers. Determination of bulk density (loose) of fine-grained fertilizers
BS EN 24497:1993 Metallic powders - Determination of particle size by dry sieving
BS EN 15150:2011 Solid biofuels. Determination of particle density
19/30376087 DC BS ISO 17867. Determination of particle size distribution. SAXS method
BS ISO 21501-2:2007 Determination of particle size distribution. Single particle light interaction methods. Light scattering liquid-borne particle counter

Association Francaise de Normalisation, Micrometer

NF ISO 9136-2:1999 Grains abrasifs - Détermination de la masse volumique apparente - Partie 2 : micrograins
NF E75-231-2*NF ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2 : microgrits.
NF U43-217:1981 Agropharmaceutical products. Method of particle size determination for "micronized" sulphurs.
NF X11-661:1990 Particle size analysis. Determination of particle size of powders. Optical microscope method.
NF A04-102:2003 Steels - Micrographic determination of the apparent grain size.
NF A04-102:2013 Steels - Micrographic determination of the apparent grain size
NF E75-100-3*NF ISO 6344-3:2022 Coated abrasives - Determination and designation of grain size distribution - Part 3 : microgrit sizes P240 to P5000
NF X43-133*NF EN ISO 28439:2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential mobility analysing systems.
NF X11-682:1984
NF ISO 6344-3:2022 Abrasifs appliqués - Détermination et désignation de la distribution granulométrique - Partie 3 : micrograins P240 à P5000
NF ISO 8486-2:2007 Abrasifs agglomérés - Détermination et désignation de la distribution granulométrique - Partie 2 : micrograins F230 à F2000
NF X11-666:1984 PARTICLE SIZE ANALYSIS OF POWDERS. DIFFRACTION METHOD.
NF ISO 4701:1986 Minerais de fer - Détermination de la granulométrie par tamisage.
NF T20-218*NF ISO 8220:1987 Aluminium oxide primarilly used for the production of aluminium. Determination of the fine particle size distribution (less than 60 micrometers). Method using electroformed sieves.
NF X11-632:1990 SIZE DETERMINATION. EXPRESSION FO RESULTS OF SIZE DETERMINATION.
NF E75-230-2*NF ISO 8486-2:2007 Bonded abrasives - Determination and designation of grain size distribution - Part 2 : microgrits F230 to F2000.
NF E75-231-1*NF ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Part 1 : macrogrits.
NF X31-554:2014 Soil quality - Determination of particle density
NF V37-030*NF ISO 12194:1996 Leaf tobacco. Determination of strip particle size.
NF ISO 12194:1996 Tabac en feuilles - Détermination de la taille des particules de strips
NF E48-651*NF ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope.
NF A04-102*NF EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size
NF X43-017:1984 Air quality. Measurement of the concentration of solid particles in ambient air. Beta ray absorption method.
NF EN ISO 4497:2020 Poudres métalliques - Détermination de la granulométrie par tamisage à sec
NF E75-231:1993 Abrasive macrograins. Determination of bulk density.
NF X21-014:2012 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size.
NF E75-100-3:2013 Coated abrasives - Grain size analysis - Part 3: determination of grain size distribution of microgrits P240 to P2500
NF B57-012*NF ISO 2031:2015 Granulated cork - Determination of apparent bulk density
NF X31-554:1998 Soil quality. Determination of particle density.
NF A95-188*NF EN ISO 4497:2020 Metallic powders - Determination of particle size by dry sieving
NF X31-554*NF EN ISO 11508:2017 Soil quality - Determination of particle density
NF ISO 2031:2015 Granulés de liège - Détermination de la masse volumique apparente
NF EN ISO 17830:2016 Biocombustibles solides - Détermination de la distribution granulométrique des granulés désintégrés
NF X34-112*NF EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
NF X11-634:1988 Granulométrie - Caractérisation de la taille et de la forme des éléments d'une population granulaire
NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
NF U42-620*NF EN ISO 7837:2000 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers
NF A95-152:1993 Metallic powders. Determination of particle size by dry sieving.
NF ISO 8220:1987 Oxyde d'aluminium principalement utilisé pour la production de l'aluminium - Détermination de la distribution granulométrique fine (inférieure à 60 micromètres) - Méthode par emploi de tamis électroformés.
NF B41-204-1*NF EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1 : Determination of grain size and size distribution

National Metrological Verification Regulations of the People's Republic of China, Micrometer

JJG 902-1995 Verification Regulation of Patical Size Meter by Photosedimention
JJG(机械) 7-1990 Verification rules for single particle compressive strength tester
JJG(地质) 1019-1990 SKC-2000 Type Light Transmission Particle Size Distribution Tester Verification Regulations
JJG 1104-2015 Dynamic Light Scattering Particle Size Analyzers
JJG 396-2002 Verification Regulation of Inductive Micrometers
JJG 44-1986 Verification Regulation of Calibrator for Minimeter
JJG 1060-2010 Verification Regulation of Low-level Dissolved Oxygen Meters
JJG(邮电) 022-1994 Specification for verification of microwave relay tester
JJG 525-2014 Wedge-feet Calibrator for Micrometers
JJG 525-2002 Verification Regulation of Wedge-feet Calibrator for Micrometers
JJG 570-1988 Verification Regulation of Capacitance Comparator
JJG(纺织) 039-1990 Verification Regulations for Whiteness Meter
JJG(机械) 5-1990 Verification Regulations for Particle Size Composition Determination Device
JJG(电子) 310006-2006 Specification for verification of noise detectors for particle collision of devices
JJG 916-1996 Verification Regulation of Gas-Sensitive Chromatograph for Measuring Trace Hydrogen
JJG 776-1992 Venification Regulation of Microwave Radiation and Leakage Energy Measuring Instrument
JJG(电子) 01004-1989 Specification for verification of AD5122 microwave group delay measuring sets
JJG 776-2014 Microwave Radiation and Leakage Energy Measuring Instruments
JJG(地质) 1010-1990 Verification Regulations for Microphotometer
JJG 429-2000 Verification Regulation for Measurement Standard Instrument of Roundness and Cylindricity

Korean Agency for Technology and Standards (KATS), Micrometer

KS L 6523-2016(2021) Coated abrasives－Determination of grain size distribution of microgrits P12 to P220
KS L 6523-2016 Coated abrasives－Determination of grain size distribution of microgrits P12 to P220
KS L ISO 8486-2:2013 Bonded abrasives —- Determination and designation of grain size distribution —- Part 2: Microgrits F230 to F2000
KS D 0205-2002(2022) Steel－Micrographic determination of the ferritic or austenitic grain size
KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
KS I 3213-2009(2019) Testing methods for concentration of fine particles in highly purified water
KS B 6331-1992(2017) The determination of particulate contamination in hydraulic fluids by the particle count method
KS D ISO 4499-2-2009(2019) Hardmetals－Metallographic determination of microstructure－Part 2：Measurement of WC grain size
KS I 3213-2009 Testing methods for concentration of fine particles in highly purified water
KS I ISO 28439:2013 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems
KS H ISO 12194-2009(2019) Leaf tobacco－Determination of strip particle size
KS I ISO 11508-2009(2014) Soil quality－Determination of particle density
KS M 2048-2001 Testing method for deleterious particles in lubricating grease
KS B 6331-1992 The determination of particulate contamination in hydraulic fluids by the particle count method
KS L 6529-2003 Test method for bulk density of artificial abrasive microgrits
KS M 7096-2018 Paper — Determination of stiffness by Clark stiffness tester
KS D 0046-2002 Methods of sampling for size analysis of ferroalloys and size determination
KS L 6802-2012(2017) Carbon fiber－Determination of size content
KS M ISO 8511-2007(2022) Rubber compounding ingredients－Carbon black－Determination of pellet size distribution
KS M ISO 8511-2007(2017) Rubber compounding ingredients－Carbon black－Determination of pellet size distribution
KS D ISO 4497:2004 Metallic powders-Determination of particle size by dry sieving
KS I ISO 11508:2009 Soil quality－Determination of particle density
KS L ISO 14703:2001 Fine ceramics(advanced ceramics, advanced technical ceramics)-Sample preparation for the determination of particle size distribution of ceramic powders
KS L ISO 14703:2016 Fine ceramics(advanced ceramics, advanced technical ceramics)－Sample preparation for the determination of particle size distribution of ceramic powders
KS M ISO 15825:2007 Rubber compounding ingredients－Carbon black－Determination of aggregate size distribution by disc centrifuge photosedimentometry
KS M ISO 15825:2017 Rubber compounding ingredients－Carbon black－Determination of aggregate size distribution by disc centrifuge photosedimentometry
KS M ISO 18847:2022 Solid biofuels — Determination of particle density of pellets and briquettes
KS M ISO 7837:2007 Fertilizers-Determination of bulk density (loose) of fine-grained fertilizers
KS M ISO 2031:2004 Granulated cork－Determination of bulk density
KS E ISO 4700:2010 Iron ore pellets for blast furnace and direct reduction feedstocks-Determination of the crushing strength
KS E ISO 4700:2017 Iron ore pellets for blast furnace and direct reduction feedstocks－Determination of the crushing strength
KS M ISO 7837:2013 Fertilizers－Determination of bulk density (loose) of fine-grained fertilizers

VN-TCVN, Micrometer

TCVN 4393-2009 Steels.Micrographic determination of the apparent grain size
TCVN 4853-1989 Mineral fertilizers.Determination of granularity
TCVN 6863-2001 Soil quality.Determination of particle density
TCVN 4838-1989 Sugar.Method of Granulometric structure determination
TCVN 5052-2-2009 Hardmetals.Metallographic determination of microstructure.Part 2: Measurement of WC grain size
TCVN 5226-1990 Coke ( greater than 20mm ).Determination of mechanical strength
TCVN 5352-1991 Graphite.Method for the determination of granulometric composition
TCVN 4852-1989 Mineral fertilizers.Determination of grain static strength
TCVN 6683-2000 Leaf tobacco.Determination of strip particle size

TR-TSE, Micrometer

TS 882-1970 MICROGRAPHIC DETERMINATION OF THE AUSTENITIC GRAIN S?ZE OF STEELS

International Organization for Standardization (ISO), Micrometer

ISO 643:2003 Steels - Micrographic determination of the apparent grain size
ISO/CD 643 Steels — Micrographic determination of the apparent grain size
ISO 643:2012 Steels - Micrographic determination of the apparent grain size
ISO 13323-1:2000 Determination of particle size distribution - Single-particle light interaction methods - Part 1: Light interaction considerations
ISO/DIS 643:2023 Steels — Micrographic determination of the apparent grain size
ISO 21363:2020 Nanotechnologies — Measurements of particle size and shape distributions by transmission electron microscopy
ISO 9136-1:2004 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
ISO 8486-2:2007 Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F2000
ISO 4701:1999 Iron ores - Determination of size distribution by sieving
ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement
ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
ISO 14966:2019 Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
ISO 8486:1986 Bonded abrasives; Grain size analysis; Designation and determination of grain size distribution of macrogrits F4 to F220
ISO 6344-3:2013 Coated abrasives.Grain size analysis.Part 3: Determination of grain size distribution of microgrits P240 to P2500
ISO 13067:2011 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size
ISO 13319:2007 Determination of particle size distributions - Electrical sensing zone method
ISO 11508:2017 Soil quality - Determination of particle density
ISO 2031:1991 Granulated cork; determination of bulk density
ISO 2031:2015 Granulated cork - Determination of apparent bulk density
ISO 8840:1987 Refractory materials; Determination of bulk density of granular materials (grain density)
ISO 8840:2021 Refractory materials - Determination of bulk density of granular materials (grain density)
ISO 15825:2015 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry
ISO 15825:2004 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry
ISO 15825:2017 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry
ISO 556:1980 Coke (greater than 20 mm in size); Determination of mechanical strength
ISO 6344-3:2021 Coated abrasives — Determination and designation of grain size distribution — Part 3: Microgrit sizes P240 to P5000
ISO 4701:1985 Iron ores; Determination of size distribution by sieving
ISO 4497:1983 Metallic powders; Determination of particle size by dry sieving
ISO 4700:1983 Iron ore pellets; Determination of crushing strength
ISO 7837:1992 Fertilizers; determination of bulk density (loose) of fine-grained fertilizers
ISO 16232-8:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis
ISO 13383-1:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution

PH-BPS, Micrometer

PNS ISO 6344-3:2021 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500
PNS ISO 8486-2:2021 Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F2000

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Micrometer

GB/T 27596-2011 Dyestuffs.Determination of particle fineness.Microscope method
GB/T 11446.9-1997 Test method for particles in electronic grade water by instrument
GB/T 11446.9-2013 Test method for particles in electronic grade water by instrument
GB/T 9258.3-2000 Coated abrasives-Grain size analysis-Part 3: Determination of grain size distribution of microgrits P240 to P2500
GB/T 14322-1993 Determination for grain size distribution of microgrits W 3.5 to W 0.5 of conventional abrasive
GB/T 9258.3-2017 Coated abrasives.Grain size analysis.Part 3:Determination of grain size distribution of microgrits P240 to P2 500
GB/T 6288-1986 Determination of particle size for granular molecular sieve
GB 6288-1986 Determiantion of particle size for granular molecular sieve
GB/T 20427-2006 Height setting micrometers and riser blocks
GB/T 26793-2011 Coulometry micro water teller
GB/T 10515-1989 The determination of particle size for nitrophosphate
GB/T 10515-2012 Determination of particle size for nitrophosphate
GB/T 31313-2014 Fluorspar.Determination of particle size distribution by sieving
GB/T 24891-2010 Determination of particle size for compound fertilizers
GB/T 43196-2023 Nanotechnology Scanning Electron Microscopy to Measure Nanoparticle Size and Shape Distribution
GB/T 14999.7-2010 Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings
GB 9198-1988 Carrier--Determination of particle size by dry sieving method
GB/T 24192-2009 Chromium ores.Determination of particle size by sieving
GB/T 6394-2002 Metal-methids for estimating the average grain size
GB/T 9802-1988 Air quality--Determination of total suspended particulates--Gravimetric method
GB/T 2441.7-2001 Determination of Urea Determination of particle size Sieve method
GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle size
GB/T 43211-2023 Test Method for Particle Size Determination of Softwood Pellets by Mechanical Sieving
GB/T 20082-2006 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope
GB/T 15057.11-1994 Limestone for chemical industry- Determination of size
GB/T 12030-1989 Determination of particle size of podered detergents
GB/T 3780.13-1983 Carbon black(pelletized)--Determination of pour density
GB/T 5917-1986 Determination for formula feed particle size
GB/T 9258.2-2000 Coated abrasives-Grain size analysis-Part 2: Determination of grain size distribution of macrogrits P12 to P220
GB/T 9258.2-2008 Coated abrasives.Grain size analysis.Part 2:Determination of grain size distribution of macrogrits P12 to P220
GB/T 14853.6-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of individual pellet crushing trength
GB/T 23192-2008 Method for determination of starch grains in honey.Count with microscope
GB/T 3170.3-1982 Determination of particle size of aluminum powder--Sieve analysis with alcohol
GB/T 24177-2009 Standard test methods for characterizing duplex grain sizes
GB/T 20966-2007 Determination of particle size distribution for colliery powders
GB/T 10322.7-2004 Iron ore-Determination of size distribution by sieving
GB/T 1480-2012 Metallic powders.Determination of particle size by dry sieving
GB/T 12010.10-1989 Determination for particle size of polyvinyl alcohol resins

RU-GOST R, Micrometer

GOST R ISO 643-2011 Steels. Micrographic determination of the apparent grain size
GOST R ISO 643-2015 Steels. Micrographic determination of the apparent grain size
GOST 21073.1-1975 Non-ferrous metals. Determination of grain size bu comparison with microstructure scale
GOST 12536-1979 Soils. Methods of laboratory granulometric (grain-size) and microaggragate distribution
GOST 28512.3-1990 Mineral fertilizers. Method for determination of bulk density (loose) of fine-grained fertilizers
GOST 29234.1-1991 Moulding sands. Methods for determination of clayey fraction
GOST 8.411-1981 State system for ensuring the uniformity of measurements. Lever microme ters. Rules and procedure of verification
GOST 27560-1987 Flour and bran. Method for determination of particle size
GOST R 8.775-2011 State system for ensuring the uniformity of measurements. Disperse composition of gas atmospheres. Determination of nano particle size by differential electrical mobility analysis for aerosol particles
GOST 21073.2-1975 Non-ferrous metals. Determination of grain size bu grain calculation method
GOST 19724-1974 Fluorite. Method of grain-size analysis
GOST 30423-1996 Cigarettes. Determination of loss of tobacco from the ends
GOST ISO 8840-2014 Refractory materials. Determination of bulk density of granular materials (grain density)
GOST 22310-1993 Ferroalloys. Method for determination of granulometric composition
GOST 22310-1984 Ferroalloys and alloying elements. Method for the determination of granulometric composition
GOST 22162-1976 Rice. Method of determination of microhardness
GOST 13586.2-1981 Grain. Methods for determination of foreign grain and specially counted foreigen matter, small grains and grain size
GOST 33624-2015 Charcoal. Method for determination size distribution
GOST 20082-1974 Concentrated natural chalk. Method of grain-size analysis
GOST 22939.5-1978 Rutile concentrate. Method for the determination of size distribution
GOST 26312.4-1984 Groats. Methods for determination of grain size, admixture content and sound kernels
GOST 3594.12-1993 Moulding refractory clays. Method for determination of size distribution by sieving clays
GOST 25469-1993 Alumina. Sieve method for the determination of particle size distribution
GOST 21073.4-1975 Non-ferrous metals. Determination of grain size bu planimetric method
GOST 22567.2-1977 Synthetic detergents. Method for determination of granulometric composition
GOST 5636-1982 Steel and alloys. Methods of detection and determination of grain size

German Institute for Standardization, Micrometer

DIN EN ISO 643:2003 Steels - Micrographic determination of the apparent grain size (ISO 643:2003); German version EN ISO 643:2003
DIN EN 481:1993 Workplaces atmospheres; size fraction definitions for measurement of airborne particles; German version EN 481:1993
DIN 33899-3:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN ISO 6344-3:2021 Coated abrasives - Determination and designation of grain size distribution - Part 3: Microgrit sizes P240 to P5000 (ISO/DIS 6344-3:2021); Text in German and English
DIN ISO 9136-2:2000-07 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
DIN ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
DIN EN ISO 643:2020-06 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03); German version EN ISO 643:2020
DIN ISO 9136-1:2006 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004);English version of DIN ISO 9136-1:2006-03
DIN ISO 6344-3:2000 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998)
DIN EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012); German version EN ISO 643:2012
DIN EN ISO 643:2020 Steel - Micrographic determination of the apparent grain size (ISO/DIS 643:2017); German and English version prEN ISO 643:2017
DIN 22019-2:1985 Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution 60 m by ultrasonic-microsieve-analysis
DIN EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO/FDIS 643:2012); German version FprEN ISO 643:2012
DIN EN ISO 643:2023-08 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 643 (2020-06).
DIN EN ISO 11508:2014 Soil quality - Determination of particle density (ISO 11508:1998); German version EN ISO 11508:2014
DIN EN ISO 11508:2018-04 Soil quality - Determination of particle density (ISO 11508:2017); German version EN ISO 11508:2017
DIN 66135-3:2001 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
DIN ISO 6344-3:2017 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500 (ISO 6344-3:2013)
DIN EN ISO 18847:2016-12 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016); German version EN ISO 18847:2016
DIN ISO 4497:1991 Metallic powders; determination of particle size by dry sieving; identical with ISO 4497:1983
DIN EN ISO 7837:2000 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000
DIN EN ISO 4497:2020-10 Metallic powders - Determination of particle size by dry sieving (ISO 4497:2020); German version EN ISO 4497:2020

CZ-CSN, Micrometer

CSN EN 481-1994 Workplace atmospheres. Size fraction definitions for measurement of airborne particles
CSN 72 1172-1967 Determination of grain size distribution and of grain form of aggregates
CSN 72 1172 Z3-1997
CSN 42 0890 Cast.13-1984 Testing of metallic powders. Determination of particle size by microscopic method
CSN 64 0213-1986 Testing of plastics. Determination of granularity
CSN 72 1127-1982 Determination of granularity of ceramics by sedimentation method
CSN ISO 8840:1992 Rfractory materials. Determination of bulk density of granular materials (grain density)
CSN 46 7092-35-1998 Testing methods for feeding stuffs - Part 35: Determination of granularity
CSN ISO 8876:1992 Fluorspar - Determination of particle size distribution by sieving

AT-ON, Micrometer

ONORM EN 481-1993 Workplace atmospheres - Size fraction definitions for measurement of airborne particles

Professional Standard - Military and Civilian Products, Micrometer

WJ 2276-1995 Verification rules for activated carbon and impregnated carbon particle size analyzer
WJ 2293-1995 Verification rules for microscope temperature platform melting point tester
WJ 2437-1997 TCY low-light objective lens T-number measuring instrument verification regulations

HU-MSZT, Micrometer

MSZ 3256/1-1980

Military Standard of the People's Republic of China-General Armament Department, Micrometer

GJB 772.102-1989 Test methods for explosives Particle size determination microscopy
GJB 8684.23-2015 Test methods for pyrotechnic properties - Part 23: Determination of particle size distribution of smoke solid particles by electron microscopy
GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy
GJB 380.5-1987 Aircraft hydraulic system contamination test using microscope counting method to determine oil solid particle contamination degree
GJB 380.5A-2015 Aviation working fluid contamination test Part 5: Determination of solid particle contamination by microscopic counting method
GJB 380.8A-2015 Aviation working fluid contamination test Part 8: Determination of solid particle contamination by microscopic contrast method
GJB 1047.11-1990 Black powder test method Determination of particle size

European Committee for Standardization (CEN), Micrometer

EN ISO 643:2003 Steels - Micrographic determination of the apparent grain size ISO 643: 2003
EN 13205:2001 Workplace Atmospheres - Assessment of Performance of Instruments for Measurement of Airborne Particle Concentrations
EN 481:1993 Workplace atmospheres; size fraction definitions for measurement of airborne particles
EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
prEN 481-1992 Workplace atmospheres; size fraction definitions for measurement of airbone particles
EN ISO 13383-1:2016 Fine ceramics (advanced ceramics@ advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution
EN ISO 11508:2017 Soil quality - Determination of particle density
prEN ISO 18847 rev Solid biofuels — Determination of particle density of pellets and briquettes
EN ISO 4497:2020 Metallic powders - Determination of particle size by dry sieving (ISO 4497:2020)

North Atlantic Treaty Organization Standards Agency, Micrometer

STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

NATO - North Atlantic Treaty Organization, Micrometer

STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +
AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (

SE-SIS, Micrometer

SIS SS IEC 333:1986 Nuclear instrumentation - Testprocedures for semiconductor chargedparticle detectors

VE-FONDONORMA, Micrometer

Professional Standard - Petroleum, Micrometer

SY/T 6786-2010 The calibration for microspherically focused logging tool
SY/T 5880.3-1994 Microspherical focused logging tool calibration rules
SY/T 6131-1995 Determination of grain size of clastic rock by laser method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Micrometer

GB/T 34790-2017 Inspenction of grain and oils—Determination of water activity of grains—Instrumental method
GB/T 6394-2017 Determination of estimating the average grain size of metal

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Micrometer

GJB 5384.23-2005 Test methods of performance for pyrotechnic composition Part 23: Determination of particles size distribution for solid smoke particles Electron microscope method
GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method
GJB 5891.5-2006 Test method of loading material for initiating explosive device Part 5: Measurement of grain size Microscopy
GJB 380.5A-2004 Contamination test method of operating liquid for aviation Part 5:Determination of solid particle contamination level by counting method using a microscope
GJB 380.8A-2004 Contamination test method of operating fluid for aviation Part 8:Determination of solid particle contamination level by compare method using a microscope

国家市场监督管理总局、中国国家标准化管理委员会, Micrometer

GB/T 40944-2021 Determination of feed particle size—Geometric mean diameter method
GB/T 6288-2021 Determination of particle size for granular molecular sieve
GB/T 38432-2019 Particle—Gas-solid reaction measurement—Micro fluidized bed method

American Society for Testing and Materials (ASTM), Micrometer

ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM E2316-03(2009) Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM E2316-14 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM E236-66(2006) Standard Specification for Apparatus For Microdetermination Of Alkoxyl Groups
ASTM E2776-18 Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
ASTM E2776-20 Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
ASTM C1514-08 Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM F2055-00 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
ASTM F50-12 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
ASTM E1037-84(2004) Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM E1181-02(2015) Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM F1226-89(1994)e1 Standard Test Method for Calibration of Liquid-Borne Particle Counters for Submicrometer Particle Sizing (Withdrawn 2002)
ASTM E236-66(2011) Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups

Professional Standard - Agriculture, Micrometer

2354药典二部-2010 APPENDIX IX E DETERMINATION OF PARTICLE SIZE AND PARTICLE SIZE DISTRIBUTION
218药典三部-2020 Physical examination method 0982 Particle size and particle size distribution method
GB 10515-1989 Nitrophosphate particle size determination
124药典四部-2020 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
143药典四部-2015 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
1805药典一部-2010 Appendix XI B Particle Size Measurement
172药典三部-2010 Appendix V VG Particle Size Determination
199药典三部-2015 Physical inspection method 0982 General rules for particle size and particle size distribution determination method 47
845兽药典一部-2015 Appendix Contents 0900 Characteristic Inspection Method 0982 Particle Size and Particle Size Distribution Determination Method
GB 12030-1989 Determination of Particle Size of Powdered Detergents
GB/T 2448-1991 Determination of urea particle size by sieving method

Henan Provincial Standard of the People's Republic of China, Micrometer

DB41/T 1036-2015 Inclined block micrometer calibrator

Association of German Mechanical Engineers, Micrometer

VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer

中国气象局, Micrometer

QX/T 509-2019 GRIMM 180 Particulate Matter Concentration Monitor Calibration Specifications

IT-UNI, Micrometer

BE-NBN, Micrometer

NBN M 02-011-1988 Hard coal - Size analysis
NBN A 14-101-1974
NBN T 03-426-1988 Aluminium oxide primarily used for the production of aluminium - Determination of the fine particle size distribution (less than 60 u.m) - Method using electroformed sieves
NBN B 11-052-1976
NBN B 11-013-1985
NBN T 94-402-1977 Determination of the zinc mass in particles collected by air fil-tration - Atomic absorption spectrophotometry
NBN T 94-404-1977 Determination of the copper mass in particles collected by air filtration - Atomic absorption spectrophotometry
NBN T 94-403-1977 Determination of the cadmium mass in particles collected by air filtration - Atomic absorption spectrophotometry
NBN T 94-401-1977 Determination of the lead mass in particles collected by air filtration - Atomic absorption spectrophotometry
NBN T 94-406-1977 Determination of the ironmass m particles collected by air filtration - Atomic absorption spectrophotometry
NBN T 94-405-1977 Determination of the nickel mass in particles collected by air fil-tration — Atomic absorption spectrophotometry
NBN-ISO 2031:1992 Granulated cork. Determination of bulk density

RO-ASRO, Micrometer

STAS SR 8934-4-1997 Sodium chloride. Grain size determination
STAS 4763-1970 PULP AND PAPER Determination of particles retention by filtration
STAS 3282-1968
STAS 10813-1976 Air purity DETERMINATION OF PARTICULATE MATTER
STAS 3228-1983 Solid fueles COAl.S Grain size dctermination
STAS SR EN 24497-1995 Metallic powders. Determination of particle size by dry sieving
STAS 10956/4-1977 Metal powdersALUMINIUM POWDERS Determination of grain size
STAS 10195-1975 Purity of air DETERMINATION OF SETTLEARLE PARTICULATES
SR 110-10-1998 Sugar. Methods of analysis. Determination of crystals size
STAS SR ISO 9136:1995 Abrasive macrograins - Determination of bulk density

PL-PKN, Micrometer

PN C87007-16-1993 Calcium fertilizes Determination of grainsize
PN C04061-1965 Pe?roleum produc?s Foreign par?icles in greases determina?ion by microscopical me?hod
PN C04424-02-1985 Pigments Determination of particie size distribution Microscopic method-simple
PN H04951-1986 Powder metallurgy Determination of the particie size of powder by the optical microscope method
PN C87006-21-1991 Calcium-magnesium fertilizers Determination of grainsize
PN C04828-1991 Agents for laundering and washing. Powders and granules. Determination of granulity
PN-EN ISO 4499-2-2021-02 E Hardmetals -- Metallographic determination of microstructure -- Part 2: Measurement of WC grain size (ISO 4499-2:2020)

SAE - SAE International, Micrometer

SAE J418-1983 Grain Size Determination of Steels
SAE J418-1999 Grain Size Determination of Steels

Taiwan Provincial Standard of the People's Republic of China, Micrometer

CNS 8895-1982 3
CNS 3917-1976 Method for Determination at Total Suspended Particles in Atmosphere
CNS 11632-1986 13
CNS 6203-1980 Determination of Apparent Density of Material That Can be Poured from a Specified Punnel
CNS 9504-1982 4
CNS 5815-1980 Method of Test for Poor Density of Pelleted Carbon Black

Professional Standard - Light Industry, Micrometer

QB 1055-1991 Thickness Meter
QB/T 1060-2012 Softness tester
QB/T 1060-1998 Softness Tester
QB 1050-1991 Tear Tester
QB 1060-1991 Softness Tester
QB/T 1051-2012 Board bending resistance tester
QB/T 1051-1998 Cardboard Stiffness Tester
QB/T 1052-1991 Incipient wet strength tester
QB/T 1054-2004 Pulps-Tester of beating degree
QB/T 1054-1998 Pulp beating degree tester
QB 1049-1991 MIT type folding endurance tester
QB 1051-1991 Taber Stiffness Tester
QB 1054-1991 Pulp beating degree tester
QB/T 5837-2023 Micrometer for tissue paper
QB/T 1055-2004 Paper and board-Tester of thickness
QB/T 1664-2012 Board puncture resistance tester
QB/T 1664-1998 Cardboard Puncture Strength Tester
QB/T 1055-1998 Paper and board thickness tester

AR-IRAM, Micrometer

IRAM 127-1960

Professional Standard - Pharmaceutical Packaging, Micrometer

YBB 0027-2004 Insoluble Particulate Matter Test for Packaging Materials

IN-BIS, Micrometer

IS 5258-1969

Professional Standard - Chemical Industry, Micrometer

HG/T 2223-1991 Particle Size Determination of Granular Double Superphosphate
HG 2223-1991 Particle Size Determination of Granular Double Superphosphate
HG/T 3400-2001 Determination of granule fineness of dyes
HG/T 2224-1991 Determination of granular average compressive strength of granular double superphosphate

Danish Standards Foundation, Micrometer

DS/EN 481:1994 Workplace atmospheres-Size fraction definitions for measurement of airborne particles
DS/EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size
DS/ISO 15900:2020 Determination of particle size distribution – Differential electrical mobility analysis for aerosol particles
DS/ISO 4497:1994 Metallic powders - Determination of particle size by dry sieving
DS/ISO 11508:1999 Soil quality - Determination of particle density
DS/EN 16126:2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
DS/EN 24497:1994 Metallic powders-Determination of particle size by dry sieving

Hunan Provincial Standard of the People's Republic of China, Micrometer

DB43/T 2129-2021 Test method for trace carbon residual detector

工业和信息化部, Micrometer

JB/T 20202-2022 Clarity tester
QB/T 5023-2017 Paper cup stiffness tester

Group Standards of the People's Republic of China, Micrometer

T/CEC 426.3-2022 General Technical Conditions for Electric Power Oil Testing Instruments Part 3: Particle Size Meter
T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
T/CMA 034-2021 Calibration method for salt content meters analyzers
T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle

ES-AENOR, Micrometer

Liaoning Provincial Standard of the People's Republic of China, Micrometer

DB21/T 2630-2016 Determination of Crystalline Granularity of Fused Magnesium

轻工业部, Micrometer

QB 1052-1991 Initial wet strength tester

未注明发布机构, Micrometer

BS 3406-4:1993(1999) Methods for determination of particle size distribution — Part 4 : Guide to microscope and image analysis methods
BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits

Professional Standard - Building Materials, Micrometer

JC/T 650-1996 Method for determination of glass raw material particle size

Indonesia Standards, Micrometer

SNI 03-6444-2000 Test method for half cell potential uncoated dielectric material reinforcing steels in concrete

Professional Standard - Public Safety Standards, Micrometer

GA/T 1419-2017 Oil Immersion Method for Determination of Refractive Index of Glass Particles in Forensic Science

Professional Standard - Forestry, Micrometer

LY/T 1224-1999 Determination of soil particle density in forest soil

AENOR, Micrometer

UNE 103302:1994 DETERMINATION OF THE RELATIVE DENSITY OF THE PARTICLES OF A SOIL.
UNE-EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)

Professional Standard - Ferrous Metallurgy, Micrometer

YB/T 5148-1993 Method for determination of average grain size of metals
YB/T 4183-2009 Laser Diffraction Method for Determination of Particle Size Distribution of Smelting Slag Powder

Lithuanian Standards Office , Micrometer

LST EN 16126-2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
LST EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)

Professional Standard - Aviation, Micrometer

HB 5931.5-1986 Determination of solid particle pollution degree of working fluid by microscopic counting method for pollution test of aircraft hydraulic system

KR-KS, Micrometer

KS M ISO 18847-2022 Solid biofuels — Determination of particle density of pellets and briquettes

化学工业部, Micrometer

HG 2224-1991 Determination of the granular average compressive temperature of granular heavy superphosphate

ES-UNE, Micrometer

ISO/DIS 18847:2023 Solid biofuels — Determination of particle density of pellets and briquettes
UNE-EN ISO 4497:2021 Metallic powders - Determination of particle size by dry sieving (ISO 4497:2020)

ZA-SANS, Micrometer

SANS 520:2007 Coke (greater than 20 mm in size) - Determination of mechanical strength

American Society of Mechanical Engineers (ASME), Micrometer

ASME PTC 38-1980 Determining the Concentration of Particulate Matter in a Gas Stream

CU-NC, Micrometer

NC 43-09-1968 Particle boards and fibre boards Determinatipn of density

NL-NEN, Micrometer

NEN 5932-1990 Aggregates for concrete - Determination of partiele strength
NEN 5926-1990 Aggregates for concrete - Determination of partiele density

International Federation of Trucks and Engines, Micrometer

NAVISTAR CEMS AT-2-2001 Determination of Austenite Grain Size by Thermal Etching
NAVISTAR MPAPS AT-2-2016 Determination of Austenite Grain Size by Thermal Etching

Professional Standard - Electricity, Micrometer

DL/T 432-2018 Determination method of particle size in electric power oil

海关总署, Micrometer

HS/T 49-2016 Talc powder particle size determination laser diffraction method