ZH
RU
ES

Pole Material Testing Equipment

Pole Material Testing Equipment, Total:499 items.

In the international standard classification, Pole Material Testing Equipment involves: Welding, brazing and soldering, Magnetic materials, Products of the chemical industry, Protection against fire, Furniture, Materials for aerospace construction, Shipbuilding and marine structures in general, Inorganic chemicals, Electricity. Magnetism. Electrical and magnetic measurements, Mechanical testing, Medical equipment, Dentistry, Ceramics, Testing of metals, Glass, Protective equipment, Powder metallurgy, Insulating materials, Non-destructive testing, Plastics, Geology. Meteorology. Hydrology, Corrosion of metals, Terminology (principles and coordination), Construction materials, Refractories, Electronic display devices, Non-ferrous metals, Components for electrical equipment, Wood, sawlogs and sawn timber, Construction industry, Domestic, commercial and industrial heating appliances, Vocabularies, Fluid storage devices, Optoelectronics. Laser equipment, Road vehicle systems, Lamps and related equipment, Electromechanical components for electronic and telecommunications equipment, Floor treatment appliances, Measurement of force, weight and pressure, Graphic technology, Nuclear energy engineering, Electrical engineering in general, Printed circuits and boards, Paints and varnishes, Road engineering, Analytical chemistry, Construction equipment, Products of the textile industry, On-board equipment and instruments, Radiation measurements, IT terminal and other peripheral equipment, Semiconductor devices, Environmental testing, Freight distribution of goods, Rubber and plastics products, Reinforced plastics, Sports equipment and facilities, Packaging materials and accessories, Protection against dangerous goods, Pipeline components and pipelines, Equipment for the chemical industry, Electrical wires and cables, Mining and quarrying, Sterilization and disinfection, Electrical and electronic testing, Waxes, bituminous materials and other petroleum products, Medical sciences and health care facilities in general, Protection of and in buildings, Biology. Botany. Zoology, Test conditions and procedures in general, Textile fibres, Metrology and measurement in general, Structures of buildings, Agricultural machines, implements and equipment, Equipment for petroleum and natural gas industries, Installations in buildings, Water quality.

CU-NC, Pole Material Testing Equipment

NC 04-79-1987 Materials Testing. Steel Abrasive Wear Testing. Testing Equipment
NC 04-75-1986 Material Testing. Welding. Test Specimen Preparation and Sampling Selection for Chemical Composition Determination
NC 54-122-1986 Construction Materials and Products, Set Concrete. Test Specimon Preparation and Procurement

European Committee for Standardization (CEN), Pole Material Testing Equipment

EN ISO 5182:2009 Resistance welding - Materials for electrodes and ancillary equipment
EN ISO 5182:2016 Resistance welding - Materials for electrodes and ancillary equipment
EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
EN ISO 16859-2:2015 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015)
EN 13373:2003 Natural stone test methods - Determination of geometric characteristics on units
EN ISO 26203-1:2010 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2010)
EN ISO 29988-2:2018 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 9988-2:2015 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
EN ISO 12402-7:2020 Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods (ISO 12402-7:2020)
EN ISO 12402-7:2006 Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods (Incorporates Amendment A1: 2011)
EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 1873-2:2007 Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties

Danish Standards Foundation, Pole Material Testing Equipment

DS/EN ISO 5182:2009 Resistance welding - Materials for electrodes and ancillary equipment
DS/EN 60404-14:2002 Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of ferromagnetic material specimen by the withdrawal or rotation method
DS/EN 60512-13-5/Corr. 1:2007 Connectors for electronic equipment – Tests and measurements – Part 13-5: Mechanical operation tests – Test 13e: Polarizing and keying method
DS/EN 60512-13-5:2006 Connectors for electronic equipment – Tests and measurements – Part 13-5: Mechanical operation tests – Test 13e: Polarizing and keying method
DS/IEC TS 62885-1:2020 Surface cleaning appliances – Part 1: General requirements on test material and test equipment
DS/ISO 15853:2000 Thermoplastics materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
DS/EN 13923:2005 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
DS/EN ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determinaton of resistance to chemical disinfectants
DS/EN 14095:2004 Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance, safety and testing

Association Francaise de Normalisation, Pole Material Testing Equipment

NF A82-100*NF EN ISO 5182:2016 Resistance welding - Materials for electrodes and ancillary equipment
NF EN ISO 5182:2016 Soudage par résistance - Matériaux pour électrodes et équipements annexes
NF EN 61284:2000 Lignes aériennes - Exigences et essais pour le matériel d'équipement
NF A82-100:1987 Electric resistance welding. Materials for resistance welding electrodes and ancillary equipments.
NF EN 60512-5-1:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 5-1 : essais de courant limite : Essai 5a : échauffement
NF C63-101:1985 Low-voltage switchgear and controlgear for industrial use - Tests of contact materials for low-voltage controlgear
NF D35-376:1992 Heating. Continuous or intermittent heating appliances, decoration appliances, wood burning, mixed or convertible appliances. Definitions. Specifications. Tests.
NF C28-917*NF EN 60404-14:2003 Magnetic materials - Part 14 : methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method.
NF EN 16602-70-53:2016 Assurance produit des projets spatiaux - Essais de compatibilité des matériaux et matériels pour les processus de stérilisation
NF EN 60512-13-5:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 13-5 : essais de fonctionnement mécanique - Essai 13e : méthode de polarisation et de codage
NF P98-744-5:2009 Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 5 : dry bulk weighing dosing machine - Substance weighing test.
NF P98-744-4:2009 Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 4 : dry bulk weighing dosing machine - Belt sampling test
XP P94-060-1:1997 Sols : reconnaissance et essais - Essai de dessiccation - Partie 1 : détermination conventionnelle de la limite de retrait sur le passant à 400 micromètres d'un matériau.
NF C42-720:1994 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-010 : particular requirements for laboratory equipment for the heating of materials.
NF P98-744-5:1996 Road construction and maintenance equipment. On-site calibration and verification of the settings of the continuous dosing apparatus of material production plants. Part 5 : dry bulk weighing dosing machine. Substance weighing test.
NF S74-102:1985 Personal equipment for protection against heat. Method of measuring flammability of the constituent materials.
NF EN 61189-5-503:2017 Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 5-503 : méthodes d'essai générales pour les matériaux et les assemblages - Essais des filaments anodiques condu...
NF P98-744-3:2009 Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 3 : aggregate volumetrique dosing machine.
NF C93-735-503*NF EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503 : general test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
NF C96-050-10*NF EN 62047-10:2012 Semiconductor devices - Micro-electromechanical devices - Part 10: micro-pillar compression test for MEMS materials
NF EN 302065-4-4:2022 Dispositifs à courte portée (SRD) utilisant la technologie à bande ultra large (ULB) - Norme harmonisée pour l'accès au spectre radioélectrique - Partie 4 : dispositifs de détection de matériau - Sous-partie 4 : applications de détection de m...
NF C93-736*NF EN 61189-6:2008 Test methods for electrical materials, interconnection structures and assemblies - Part 6 : test methods for materials used in manufacturing electronic assemblies
NF P18-566:2014 Granulats - Analyse granulométrique - Essai à l'aide d'un appareil d'ombroscopie
NF B40-380:2021 Refractory products - Prepared unshaped materials - Dense and insulating hydraulic cements - Determination of limited temperature of using
NF S91-314*NF EN ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants
NF EN 61023:2017 Matériels et systèmes de navigation et de radiocommunication maritimes - Équipements de mesurage de la vitesse et de la distance (SDME) - Exigences de performance, méthodes de test et résultats exigibles
NF EN 61181:2007 Matériaux électriques imprégnés d'huile minérale - Application de l'analyse des gaz dissous (AGD) lors d'essais en usine de matériels électriques
NF S74-105:1985 Personal equipment for protection against heat. A method of measuring the total absorptivity of hemispherical radiation of the constituent materials.
NF S71-611-7:2007 Personal flotation devices - Part 7 : materials and components - Safety requirements and test methods.
NF EN 13923:2006 Récipients sous pression en PRV par enroulement filamentaire - Matériaux, conception, fabrication et essais
NF T50-001-2:2007 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T50-006-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T53-032-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T50-006-2*NF EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF T51-552:1988 PLASTICS. POLYCARBONATE MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES.

Korean Agency for Technology and Standards (KATS), Pole Material Testing Equipment

KS D ISO 5182:2021 Resistance Welding — Materials for electrodes and ancillary equipment
KS C ISO 5182:2008 Welding－Materials for resistance welding electrodes and ancillary equipment
KS C ISO 5182-2001(2006) Welding－Materials for resistance welding electrodes and ancillary equipment
KS B 5551-2004 Impact testing machines for metallic materials－Instrumentation
KS B 5552-2004 Impact testing machines for plastic matelials－Instrumentation
KS C 6025-1987(2018) GENERAL RULES FOR TEST OF TUNGSTEN AND MOLYBDENUM MATERIALS FOR LIGHTING AND ELECTRONIC EQUIPMENTS
KS B ISO 12005:2020 Lasers and laser-related equipment — Test methods for laser beam parameters — Polarization
KS C 6025-1987 General rules for test of tungsten and molybdenum material s for lighting and electronic equipments
KS G ISO 11110:2018 Winter-sports equipment — Test devices for the setting of the functional unit ski/boot/binding — Requirements and tests
KS C IEC 60512-12-4:2009 Connectors for electronic equipment-Tests and measurements-Part 12-4:Soldering tests-Test 12d:Resistance to soldering heat, solder bath method
KS C IEC 60512-12-1:2009 Connectors for electronic equipment-Tests and measurements-Part 12-1:Soldering tests-Test 12a:Solderability, wetting,solder bath method
KS C IEC 60512-12-1:2014 Connectors for electronic equipment－Tests and measurements－Part 12-1：Soldering tests－Test 12a：Solderability, wetting,solder bath method
KS C IEC 60512-12-4:2014 Connectors for electronic equipment－Tests and measurements－Part 12-4：Soldering tests－Test 12d：Resistance to soldering heat, solder bath method
KS C IEC 61189-6:2009 Test methods for electrical materials, interconnection structures and assemblies-Part 6:Test methods for materials used in manufacturing electronic assemblies
KS P ISO 21530:2012 Dentistry－Materials used for dental equipment surfaces－Determination of resistance to chemical disinfectants
KS X ISO/IEC 24712:2007 Information technology-Office equipment-Colour test pages for measurement of office equipment consumable yield
KS M ISO 15526-2-2006(2011) Plastics－Polyketone(PK) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS P ISO 21530:2018 Dentistry — Materials used for dental equipment surfaces — Determination of resistance to chemical disinfectants
KS M ISO 15103-2-2012(2017) Plastics－Poly(phenylene ether)(PPE) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 8986-2-2013(2018) PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 9988-2-2012(2017) Plastics－Polyoxymethylene(POM) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 21970-2:2021 Plastics — Polyketone(PK) moulding and extrusion materials —Part 2: Preparation of test specimens and determination of properties
KS V ISO 12402-7:2012 Personal flotation devices－Part 7：Materials and components－Safety requirements and test methods
KS M ISO 20202:2010 Carbonaceous materials used in the production of aluminium-Cold and tepid ramming pastes-Preparation of baked test pieces and determination of loss on baking
KS M ISO 20202:2013 Carbonaceous materials used in the production of aluminium－Cold and tepid ramming pastes－Preparation of baked test pieces and determination of loss on baking
KS M ISO 1873-2:2011 Plastics-Polypropylene(PP) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 9988-2:2012 Plastics－Polyoxymethylene(POM) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 7391-2:2011 Plastics-Polycarbonate(PC) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 1872-2:2011 Plastics-Polyethylene(PE) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 15526-2:2012 Plastics－Polyketone(PK) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 1874-2-2013(2018) PLASTIC — POLYAMIDE(PA) MOULDING AND EXTRUSION MATERIALS — PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 15103-2-2012(2022) Plastics－Poly(phenylene ether)(PPE) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties

Japanese Industrial Standards Committee (JISC), Pole Material Testing Equipment

JIS Z 3234:2021 Materials for resistance welding electrodes and ancillary equipment
JIS T 0302:2000 Testing method for corrosion resistance of metallic biomaterials by anodic polarization measurement
JIS H 4460:1994 General rules for test of tungsten and molybdenum materials for lighting and electronic equipments
JIS H 4460:2002 General rules for test of tungsten and molybdenum materials for lighting and electronic equipments

KR-KS, Pole Material Testing Equipment

KS D ISO 5182-2021 Resistance Welding — Materials for electrodes and ancillary equipment
KS L 1672-2023 Specimen preparation for the performance test of slurry-type photocatalytic materials
KS B ISO 12005-2020 Lasers and laser-related equipment — Test methods for laser beam parameters — Polarization
KS X ISO/IEC 24712-2007(2023) Information technology－Office equipment－Colour test pages for measurement of office equipment consumable yield
KS G ISO 11110-2018 Winter-sports equipment — Test devices for the setting of the functional unit ski/boot/binding — Requirements and tests
KS P ISO 21530-2018 Dentistry — Materials used for dental equipment surfaces — Determination of resistance to chemical disinfectants
KS M ISO 21970-2-2021 Plastics — Polyketone(PK) moulding and extrusion materials —Part 2: Preparation of test specimens and determination of properties

ES-UNE, Pole Material Testing Equipment

UNE-EN ISO 5182:2017 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016)
UNE-EN ISO 16859-2:2016 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015)
UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
UNE-EN 60512-13-5:2006 CORR:2007 Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
UNE-EN ISO 21970-2:2020 Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21970-2:2019)
UNE-EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
UNE-EN ISO 16396-2:2023 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2022)
UNE-EN ISO 24025-2:2021 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24025-2:2020)
UNE-EN ISO 20557-2:2019 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018)
UNE-EN ISO 29988-2:2018 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 29988-2:2018)
UNE-EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)

The American Road & Transportation Builders Association, Pole Material Testing Equipment

AASHTO TP51-1995 Standard Test Method for Testing Cathodic Protection Materials and Systems for Bridge Decks 2000 Edition

SE-SIS, Pole Material Testing Equipment

SIS SS-ISO 5182:1983 Materials for resistance welding elec- trodes and ancillary equipment
SIS SS-ISO 5182:1992 Welding materials for resistance welding electrodes and ancillary equipment
SIS SS 11 03 11-1987 Metallic materials - Calibration of force proving instruments used for the verifi-cation of uniaxial testing machines

International Organization for Standardization (ISO), Pole Material Testing Equipment

ISO 5182:1978 Materials for resistance welding electrodes and ancillary equipment
ISO 5182:2008 Resistance welding - Materials for electrodes and ancillary equipment
ISO 5182:1991 Welding; materials for resistance welding electrodes and ancillary equipment
ISO 5182:2016 Resistance welding - Materials for electrodes and ancillary equipment
ISO 16859-2:2015 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices
ISO/IEC 24712:2007 Colour test pages for measurement of office equipment consumable yield
ISO/FDIS 9862:2023 Geosynthetics — Sampling and preparation of test specimens
ISO 9862:2023 Geosynthetics — Sampling and preparation of test specimens
ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants
ISO 4965-2:2012 Metallic materials - Dynamic force calibration for uniaxial fatigue testing - Part 2: Dynamic calibration device (DCD) instrumentation
ISO 26203-1:2010 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems
ISO 26203-1:2018 Metallic materials - Tensile testing at high strain rates- Part 1:Elastic-bar-type systems
ISO 9988-2:2006 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 16396-2:2022 Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 29988-2:2018 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO/DIS 17855-2:1980 Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO/DIS 19069-2:1980 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 12402-7:2006 Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods
ISO 20202:2004 Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of baked test pieces and determination of loss on baking
ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 9988-2:1991 Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 1873-2:1997 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 7391-2:1986 Plastics; Polycarbonate moulding and extrusion materials; Part 2 : Preparation of test specimens and determination of properties
ISO 7391-2:1996 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

Lithuanian Standards Office , Pole Material Testing Equipment

LST EN ISO 5182:2009 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2008)
LST EN 60404-14-2003 Magnetic materials. Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method (IEC 60404-14:2002)
LST EN 60512-13-5-2006 Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006)
LST EN 60512-13-5-2006/AC-2007 Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006)
LST EN 50267-1-2000 Common test methods for cables under fire conditions. Tests on gases evolved combustion of materials from cables. Part 1: Apparatus
LST EN 13923-2006 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
LST ISO 5690-1:1997 Equipment for distributing fertilizers. Test methods. Part 1: Full width fertilizer distributors
LST EN 14095-2004 Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance, safety and testing

British Standards Institution (BSI), Pole Material Testing Equipment

BS 4577:1970 Specification for materials for resistance welding electrodes and ancillary equipment
BS EN ISO 5182:2016 Tracked Changes. Resistance welding. Materials for electrodes and ancillary equipment
BS ISO 22731:2020 Carbonaceous materials used in the production of aluminium. Cathode. Cathode abrasion testing
20/30371168 DC BS ISO 22731. Carbonaceous materials used in the production of aluminium. Cathode. Cathode abrasion testing
BS 6043-3.2:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of density of cathode blocks and prebaked anodes
BS EN 60404-14:2002 Magnetic materials. Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
BS 6043-3.1.2:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of anodes
BS 6043-3.1.1:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of cathodes
BS PD IEC/TS 62885-1:2016 Surface cleaning appliances. General requirements on test material and test equipment
PD IEC TS 62885-1:2020 Surface cleaning appliances. General requirements on test material and test equipment
BS 2782-9 Met 902A:1992 Methods of testing plastics. Sampling and test specimen preparation.. Compression moulding test specimens of thermosetting materials
BS 6043-3.6:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature
BS EN IEC 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - General test method for materials and assemblies. Conductive anodic filaments (CAF) testing of circuit boards
BS 5N 100-2:2018 Tracked Changes. Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen
BS ISO/IEC 24712:2006 Colour test pages for measurement of office equipment consumable yield
BS 6043-2.1:1985 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling
BS EN 61010-2-010:1993 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of materials
BS EN ISO 21970-2:2019 Plastics. Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS 6043-2-18:2001 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of total sulfur by the Eschka method
BS 6043-1.8:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of ash
BS EN ISO 16396-2:2017 Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1874-2+A1:2007 Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1874-2:2006+A1:2010 Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1874-2:2012 Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN 13923:2005 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
BS EN 13923:2006 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
BS 7539:1992 Methods for test for determination of properties of cushioning materials for package design purposes
BS 6043-1.13:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content
BS ISO 28078-2:2010 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 28078-2:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS 6043-3.3:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method
BS EN ISO 24022-2:2020 Plastics. Polystyrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 23153-2:2020 Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1622-2:1999 Plastics - Polystrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1622-2:1996 Plastics. Polystrene (PS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 9988-2:2006 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 15526-2:2004 Plastics - Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
PD ISO/TR 13086-2:2017 Gas cylinders. Guidance for design of composite cylinders. Bonfire test issues
BS EN ISO 21530:2004 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants
15/30322585 DC BS EN ISO 12402-7. Personal flotation devices. Part 7. Materials and components. Safety requirements and test methods
BS EN 868-4:1999 Packaging materials and systems for medical devices which are to be sterilized - Paper bags - Requirements and test methods
BS ISO 4965-2:2012 Metallic materials. Dynamic force calibration for uniaxial fatigue testing. Dynamic calibration device (DCD) instrumentation
BS EN ISO 12005:2022 Tracked Changes. Lasers and laser-related equipment. Test methods for laser beam parameters. Polarization
21/30406472 DC BS EN ISO 12005. Lasers and laser-related equipment. Test methods for laser beam parameters. Polarization
BS ISO 25137-2:2009 Plastics - Sulfone polymer moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 15103-2:2007 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 24025-2:2020 Plastics. Sulfone polymer moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 20558-2:2019 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Preparation of test specimen and determination of properties
BS 6043-1.9:1989 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulphur content (bomb method)
BS 6043-2.11:1995 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content
22/30445078 DC BS EN ISO 9862. Geosynthetics. Sampling and preparation of test specimens
BS 6043-2.9:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution
BS EN ISO 19064-2:2020 Plastics. Styrene-acrylonitrile (SAN) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN 14278-1:2005 Textiles - Determination of cotton fibre stickiness - Method using a manual theromodetection device
BS EN 14278-1:2004 Textiles-Determination of cotton fibre stickiness-Part 1:Method using a manual thermodetection device
BS EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 7792-2:2012 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 20028-2:2017 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS 6043-2.16:1998 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of water content of calcined coke
20/30397032 DC BS ISO 27186. Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements
BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method
BS EN ISO 21301-2:2019 Plastics. Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 17855-2:2016 Tracked Changes. Plastics. Polyethylene (PE) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 16396-2:2022 Tracked Changes. Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 24023-2:2020 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 29988-2:2018 Tracked Changes. Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 19069-2:2016 Tracked Changes. Plastics. Polypropylene (PP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of Materials
BS EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of material
22/30436437 DC BS EN 14960-4. Inflatable play equipment - Part 4. Additional safety requirements and test methods for bungee runs
BS 6043-1.4:1981 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of toluene-insoluble material
BS 6043-1.5:1983 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of quinoline-insoluble material

German Institute for Standardization, Pole Material Testing Equipment

DIN EN ISO 5182:2016-11 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016); German version EN ISO 5182:2016
DIN 51919:2013-05 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN 51919:1999 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method; solid materials
DIN 51919:2013 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN 51932:2010-06 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
DIN 50159-2:2022-06 Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices
DIN EN ISO 5182:2016 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016); German version EN ISO 5182:2016
DIN EN 60404-14:2003 Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method (IEC 60404-14:2002); German version EN 60404-14:2002
DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN 51231-1:2001-12 Material testing machines - Testing equipment for structural components - Part 1: Floor slabs
DIN 51932:2010 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
DIN 52188:1979 Testing of wood; determination of ultimate tensile stress parallel to grain
DIN EN ISO 5182:2009 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2008);English version of DIN EN ISO 5182:2009-08
DIN 50159-2:2022 Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices
DIN 75200:1980 Determination of burning behaviour of interior materials in motor vehicles
DIN EN 60404-14:2003-02 Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method (IEC 60404-14:2002); German version EN 60404-14:2002
DIN 51932:1998 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
DIN 53781:2003 Coating materials - Methods for testing the resistance of coatings to ionizing radiation in nuclear plants
DIN EN 60512-13-5 Berichtigung 1:2008-11 Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006); German version EN 60512-13-5:2006, Corrigendum to DIN EN 60512-13-5:2006-11; German ver...
DIN EN 60512-13-5:2006-11 Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006); German version EN 60512-13-5:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid along...
DIN ISO/IEC 24712:2011-09 Colour test pages for measurement of office equipment consumable yield (ISO/IEC 24712:2007)
DIN 25482-6:1993 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements with allowance for the influence of sample treatment and equipment used
DIN 16781-2:1989 Plastics moulding materials; polyoxymethylene (POM) moulding materials; preparation of specimens and determination of their properties
DIN 51231-1:2001 Material testing machines - Testing equipment for structural components - Part 1: Floor slabs
DIN IEC 62088:2002 Nuclear instrumentation - Photodiodes for scintillation detectors - Test procedures (IEC 62088:2001)
DIN 51701-4:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 4: Equipment
DIN 50016:1962 Testing of materials, structural components and equipment; method of test in damp alternating atmosphere
DIN EN 61189-5-503:2018-01 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards (IEC 61189-5-503:2017)...
DIN 7742-2:1990 Cellulose ester (CA, CP, CAB) moulding materials; preparation of specimens and determination of their properties
DIN 51940:2012-03 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN EN 14960-4:2022-10 Inflatable play equipment - Part 4: Additional safety requirements and test methods for bungee runs; German and English version prEN 14960-4:2022 / Note: Date of issue 2022-09-16
DIN 55991-2:2016-03 Paints and varnishes - Coatings for nuclear facilities - Part 2: Identity testing of coating materials
DIN EN 61189-6:2007 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies (IEC 61189-6:2006); German version EN 61189-6:2006
DIN EN ISO 9862:2005-05 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005); German version EN ISO 9862:2005 / Note: To be replaced by DIN EN ISO 9862 (2023-01).
DIN 16780-2:1990 Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties
DIN 51941-1:2008 Testing of carbonaceous materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN 51925:1996 Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
DIN ISO/IEC 24712:2011 Colour test pages for measurement of office equipment consumable yield (ISO/IEC 24712:2007)
DIN EN 14960-4:2022 Inflatable play equipment - Part 4: Additional safety requirements and test methods for bungee runs; German and English version prEN 14960-4:2022
DIN 16782-2:1991 Polytetrafluoroethylene (PTFE) moulding materials; preparation of specimens and determination of properties
DIN EN ISO 9862:2023-01 Geosynthetics - Sampling and preparation of test specimens (ISO/DIS 9862:2022); German and English version prEN ISO 9862:2022 / Note: Date of issue 2022-12-09*Intended as replacement for DIN EN ISO 9862 (2005-05).
DIN 52612-2:1984 Tesing of thermal insulating materials; determination of thermal conductivity by means of the guarded hot plate apparatus; conversion of the measured values for building applications
DIN 50158-2:2008-04 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 2: Verification and calibration of the testing devices
DIN EN ISO 21970-2:2019-12 Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21970-2:2019); German version EN ISO 21970-2:2019
DIN 50011-2:1960 Testing of Materials, Structural Components and Equipment; Hot Cabinets; Directions for the Storage of Specimens
DIN 51941-1:2008-01 Testing of carbonaceous materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN 51078:2002 Testing of ceramic materials - Preparation of samples for the determination of change of mass during drying and for chemical analysis
DIN EN 14469-2:2004-08 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens; German version EN 14469-2:2004
DIN EN ISO 24025-2:2020-08 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24025-2:2020); German version EN ISO 24025-2:2020
DIN EN ISO 16396-2:2022-10 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2022); German version EN ISO 16396-2:2022
DIN EN ISO 19069-2:2020-01 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016); German version EN ISO 19069-2:2016 / Note: To be replaced by DIN EN ISO 19069-2 (2023-02).
DIN EN ISO 29988-2:2018-09 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 29988-2:2018); German version EN ISO 29988-2:2018
DIN EN ISO 20557-2:2018-12 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018); German version EN ISO 20557-2:2018
DIN EN ISO 17855-2:2020-01 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016); German version EN ISO 17855-2:2016
DIN EN 13923:2006-02 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing; German version EN 13923:2005
DIN 1996-16:1975-12 Testing of Bituminous Materials for Road Building and Related Purposes; Determination of Segregation Tendency

Group Standards of the People's Republic of China, Pole Material Testing Equipment

T/MBJX 0007-2021 Test specification for multipole magnetic rings of permanent magnetic materials
T/SXMES 14-2022 Evaluation method of surface temperature for metal material fatigue limit test
T/ZAMEE 13-2022 Preparation method and equipment of nano magnetic nondestructive testing materials
T/CEEIA 577-2022 Electrode for iron chromium flow battery technical requirements and test
T/CADBM 21-2019 Test method for limit emission rate of organic pollutants in decoration materials

ZA-SANS, Pole Material Testing Equipment

SANS 5182:1991 Welding - Materials for resistance welding electrodes and ancillary equipment
SANS 53923:2009 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
SANS 161-2:1997 Plastics - Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties

(U.S.) Plastic Pipe Association, Pole Material Testing Equipment

PPI TN-5-1998 Equipment Used in the Testing of Plastic Piping Components and Materials

IT-UNI, Pole Material Testing Equipment

UNI 7320-1974
UNI 3137-1965 Microscopic examination of ferrous materials. Cutting of samples and specimens, preparaton and etching of specimens (etching reagents).
UNI 3138-1965

AT-ON, Pole Material Testing Equipment

ONORM B 3825-2002 Behaviour of equipment materials in fire - Testing of upholstery fabrics
ONORM M 7610-1977 Standard atmospheres for conditioning and/or testing of materials, structural components and equipment
ONORM B 6010-1993 Materials for thermal and/or acoustic insulation in building construction — Test methods
ONORM B 3822-1984 Behaviour of equipment materials in fire; Decoration articles; Test and requirements
ONORM B 3680 Teil.2-1982 Testing of bituminous materials for road pavings and related purposes; evaluation of test results
ONORM M 7446-1992 Condensing appliances for gaseous fuels - Requirements, disposal of condensate, flue ducting, testing

RO-ASRO, Pole Material Testing Equipment

STAS 10624-1988 Electric welding by pressure SPECIFICATIONS FOR MATERIALS USED FOR CONTACT ELECTRODS AND ANCILLARY EQUIPMENTS
STAS 11543-1982 ELECTRICAL INSULATING MATERIALS Method of test for insulation resis tance and volume resistivity at elevated temperatures

United States Navy, Pole Material Testing Equipment

NAVY MIL-PRF-28800 F-1996 TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR

PL-PKN, Pole Material Testing Equipment

PN M48050 ArkusZ3-1972 Aggregate drying plant estings
PN M68253-1992 Machines and equipment for processing of plastic materials. Machines for worm moulding. General requirements and testing
PN M34821-06-1989 Ash and slag handling installations Materials hydraulice handling e?uipment ash and slag Re?uirements and tests
PN M68207-1991 Plastic and elastomeric materials processing machines. Batch mixer.Requirements and tests
PN S76105-1973 Spark gap with three elek?rodes for ?es?ing igni?ion devices of mo?or vehicles
PN B02421-1985 Heating and district heating Heat insulations of pipelines, valves and equipment Specifications and tests
PN T42113-1989 Data processing cquipmcnt Saiety of computers Materials Resistancc to fire Re?uiremcnts and tests
PN H77100-1964 Articles de menage Ustensiles en fonte, emailles Specifications techn?ques

工业和信息化部, Pole Material Testing Equipment

SJ/T 11792-2022 Test method for conductivity of lithium-ion battery electrode materials
SJ/T 11794-2022 Test method for free lithium in lithium-ion battery cathode materials
SJ/T 11793-2022 Test method for electrochemical properties of lithium-ion battery electrode materials
SJ/T 11795-2022 Test method for magnetic foreign matter content in lithium-ion battery electrode materials

Professional Standard-Ships, Pole Material Testing Equipment

CB/T 3794-2014 Test methods for the properties of piezoelectric ceramics.Test for electrode joint strength

American Society for Testing and Materials (ASTM), Pole Material Testing Equipment

ASTM D6120-97(2002) Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
ASTM D6120-97(2017)e1 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
ASTM D116-86(2006) Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
ASTM F2992-23 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer Test Equipment
ASTM D5288-97(2004) Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D5288-97 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D5288-21 Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D5288-10 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM F1790/F1790M-15 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with CPP Test Equipment
ASTM F1790/F1790M-15(2021) Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with CPP Test Equipment
ASTM F2819-10 Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices
ASTM D5288-14 Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM E531-13 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
ASTM F2992/F2992M-15 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer (TDM-100) Test Equipment
ASTM D4832-95e1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM D4832-16e1 Standard test method for preparation and testing of controlled low strength material (CLSM) test cylinders
ASTM F1839-08e2 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
ASTM D4832-02 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM D1185-98a(2003) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM D1185-98a Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM D2865-95 Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM D2865-01 Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM D4832/D4832M-23 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Cylindrical Test Specimens
ASTM G125-00 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-95e1 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2015) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2023) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2008) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM F1839-08 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
ASTM F1839-97 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
ASTM F1839-08(2016) Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
ASTM F1839-08(2021) Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
ASTM E869-93(2006) Standard Test Method for Performance Evaluation of Fuel Ethanol Manufacturing Facilities
ASTM D2865M-06 Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM D5588-97(2002) Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
ASTM D5588-97 Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
ASTM D5588-97(2008) Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
ASTM D5588-97(2012) Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
ASTM F1277-95 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
ASTM D1830-99 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D1830-99(2005) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM E1108-86(2004) Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
ASTM D1185-98a(2009) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM F748-16 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM D4832-16 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM F1277-02 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method

HU-MSZT, Pole Material Testing Equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pole Material Testing Equipment

GB/T 9937-1988 Terms associated with the testing and the operating of dental material,instruments and equipment
GB/T 43092-2023 High-temperature performance test method for electrochemical performance testing of lithium-ion battery cathode materials
GB/T 28876.2-2014 Flammability of materials in space experimental facilities.Part 2:Test methods
GB 4793.6-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for the heating of materials
GB/T 29459.1-2012 Small punch test methods of metallic materials for in-service pressure equipments.Part 1:General requirements
GB/T 32363.2-2015 Plastics.Polyamide (PA) moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties
GB/T 41758.2-2022 Plastics—Polyketone (PK) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
GB/T 32234.7-2015 Personal flotation devices—Part 7: Materials and components—Safety requirements and test methods
GB/T 22271.2-2008 Plastics. Polyoxymethylene(POM) moulding and extrusion materials. Part 2: Preparation of test specimens and determination of properties

AASHTO - American Association of State Highway and Transportation Officials, Pole Material Testing Equipment

TP51-1995 Standard Test Method for Testing Cathodic Protection Materials and Systems for Bridge Decks (2000 Edition)

North Atlantic Treaty Organization Standards Agency, Pole Material Testing Equipment

STANAG 2818-2002 DEMOLITION MATERIEL: DESIGN, TESTING AND ASSESSMENTS

US-FCR, Pole Material Testing Equipment

FCR COE SL-89-2 FINAL REPORT-1989 PRELIMINARY SOUND-ABATEMENT TESTS USING SHOCK-ATTENUATING CONCRETE (SACON) AND OTHER MATERIALS, BIG BLACK TEST FACILITY

Underwriters Laboratories (UL), Pole Material Testing Equipment

UL 94-1996 Test for flammability of plastic materials for parts in devices and appliances
UL 94-2009 Test for flammability of plastic materials for parts in devices and appliances
UL 94 BULLETIN-2006 UL Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
UL 94 BULLETIN-2003 UL Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
UL 94-2013 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
UL 94 BULLETIN-2018 UL Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances (COMMENTS DUE: February 19@ 2018)
UL 94 BULLETIN-2014 UL Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances (COMMENTS DUE: January 5@ 2015)
UL 94 BULLETIN-2013 UL Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances (COMMENTS DUE: February 3@ 2014)
UL 94 BULLETIN-2016 UL Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances (COMMENTS DUE: December 26@ 2016)
UL 94 BULLETIN-2012 UL Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances (COMMENTS DUE: October 29@ 2012)
UL 94 BULLETIN-2017 UL Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances (COMMENTS DUE: December 29@ 2017)

CZ-CSN, Pole Material Testing Equipment

CSN 34 5616-1970 Test methods for testing of materials used in construction of electrical apparatus
CSN 18 5302-1980 Analog pneumatic apparatuses and equipment. Testing methods
CSN 72 6033-1986 Unshaped refractory materials. Preparation of test pieces from mouldables
CSN 62 3004-1993 Raw styrene-butadiene rubbers. Designation and test methods
CSN 05 5012-1969 Requirements for classification tests of electrodes for welding of ferritie-pearlitic steels intended for construetion of low temperatures equipment

American National Standards Institute （ANSI), Pole Material Testing Equipment

ANSI/ASTM D5288:2010 Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ANSI/UL 94b-2013 Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices
ANSI/UL 94-2006 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances (Proposal dated March 17, 2006)
ANSI/INCITS/ISO/IEC 24712:2008 Colour test pages for measurement of office equipment consumable yield
ANSI/INCITS/ISO/IEC 24712:2007 Colour test pages for measurement of office equipment consumable yield
ANSI/UL 94a-2013 Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
ANSI/UL 94-2013 Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices
ANSI/ASTM D1830:1999 Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method (10.01)
ANSI/ASTM D6343:2010 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications

Professional Standard - Ocean, Pole Material Testing Equipment

HY/T 192-2015 Test method of potentiodynamic polarization resistance of metallic materials in seawater

Standard Association of Australia （SAA）, Pole Material Testing Equipment

AS 1141.2:1999 Methods for sampling and testing aggregates - Basic testing equipment
AS 3132:1991 Approval and test specification--Enclosures of insulating material for switchgear and controlgear
AS 1816.2:2007 Metallic materials - Brinell hardness test - Verification and calibration of testing machines
AS 1141.2:2015 Methods for sampling and testing aggregates, Method 2: Basic testing equipment
AS/NZS 1580.103.1:1995 Paints and related materials - Methods of test - Examination and preparation of samples for testing
AS/NZS 1580.106.1:1995 Paints and related materials - Methods of test - Preparation of timber test panels for outdoor weathering test

Taiwan Provincial Standard of the People's Republic of China, Pole Material Testing Equipment

CNS 6337-1985 General Rules for Test of Tungsten and Molybdenum Materials for Lighting and Electronic Equipments
CNS 4390-1978 Preparation of Specimens for Optical Tests on Plastics Materials-Moulding Method
CNS 4391-1978 Preparation of Specimens for Optical Tests on Plastics Materials-Casting Method

AENOR, Pole Material Testing Equipment

UNE 59530:1994 FOOTWEAR MATERIALS. SOLING. PREPARATION OF TEST PIECES FOR PHYSICAL TESTING.
UNE-EN 60404-14:2004 Magnetic materials -- Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
UNE 135205:2014 Road signalisation equipment. Horizontal signalisation. Thermoplastics. Test methods. Determination of density thermoplastic materials cold.
UNE-EN 60512-13-5:2006 Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006).
UNE-EN 13923:2006 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
UNE 135203-2:2010 Road signalisation equipment. Horizontal signalisation. Materials. Laboratory abrasion tests. Part 2: Determination of the abrasion resistance by falling abrasive method.

RU-GOST R, Pole Material Testing Equipment

GOST 15867-1979 Details and products of wood and wooden materials. Test method for determining the strength of glued joint for an uneven pilling of facing materials
GOST R 59565-2021 Nanomanufacturing. Key control characteristics. Part 4-3. Electrode nanomaterials for electric energy storage devices. Determination of electrical resistance
GOST R 56813-2015 Polymer composites. Guide for preparation of flat panel testing and machining
GOST R IEC 61010-2-010-1999 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST R 51738-2001 Biotechnical industries equipment. Vegetable materials hydrolysis apparatus. Fermenters. Safety requirements. Test methods
GOST R 59463-2021 Nanomanufacturing. Key control characteristics. Part4-6. Electrode nanomaterials for electric energy storage devices. Determination of carbon content by infrared spectroscopy
GOST R 51088-2013 In vitro diagnostic medical devices. Reagents, kits, the test-systems, control materials, culture media. Requirements to devices and to supporting documentation
GOST R 8.637-2007 State system for ensuring the uniformity of measurements. Certified reference materials for metrological maintenance of pipeline non-destructive testing equipment. General requirements
GOST R 55044-2012 Technical diagnostics. Selection of test items for the calibration of equipment for measuring the stress-strain state of structural materials. General requirements

VE-FONDONORMA, Pole Material Testing Equipment

SAE - SAE International, Pole Material Testing Equipment

SAE HS-58-1981 Diesel Fuel Injection Equipment and Test Methods

国家市场监督管理总局、中国国家标准化管理委员会, Pole Material Testing Equipment

GB/T 37946-2019 Test method of thermal stability of materials for organic light emitting diode display (OLED)
GB/T 37945-2019 Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential scanning calorimetry (DSC)
GB/T 38048.1-2020 Surface cleaning appliances—Part1: General requirements on test material and test equipment
GB/T 41232.2-2021 Nanomanufacturing—Key control characteristics—Nano-enabled electrical energy storage—Part 2: Density measurement of cathode nanomaterials
GB/T 37199.2-2018 Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties

American Society of Civil Engineers (ASCE), Pole Material Testing Equipment

ASCE GSP 193-2009 Material, Design, Construction, Maintenance, and Testing of Pavement

International Electrotechnical Commission (IEC), Pole Material Testing Equipment

IEC 60404-14:2002 Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
IEC 60605-4:1986 Equipment reliability testing. Part 4 : Procedures for determining point estimates and confidence limits from equipment reliability determination tests
IEC 61189-6:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in electronic assemblies
IEC TS 62885-1:2018 Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC TS 62885-1:2016 Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC TS 62885-1:2020 RLV Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC TS 62885-1:2020 Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC 61010-2-010:1992 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 2-010: particular requirements for laboratory equipment for the heating of materials
IEC 60605-4/AMD1:1989 Equipment reliability testing; part 4: procedures for determining point estimates and confidence limits for equipment reliability determination tests; amendment 1 to IEC 60605-4:1986

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Pole Material Testing Equipment

IEEE 1D-1957 GUIDE FOR THE PREPARATION OF TEST PROCEDURES FOR THE THERMAL EVALUATION OF ELECTRICAL INSULATING MATERIALS
IEEE 98-1984 Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials

US-CFR-file, Pole Material Testing Equipment

CFR 46-159.005-9-2014 Shipping. Part159:Approval of equipment and materials. Section159.005–9:Approval inspections and tests.

FI-SFS, Pole Material Testing Equipment

SFS 5454-1988

UY-UNIT, Pole Material Testing Equipment

Institute of Electrical and Electronics Engineers (IEEE), Pole Material Testing Equipment

AIEE No 1D-1957 AIEE Guide For the Preparation of test Procedures for the Thermal Evaluation of Electrical Insulating Materials
IEEE Std 98-2002 IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
IEEE Std 98-1984 IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
IEEE Std 98-2016 IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
IEEE P98/ D4, April 2014 IEEE Draft Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials

ANSI - American National Standards Institute, Pole Material Testing Equipment

INCITS/ISO/IEC 24712:2007 Colour test pages for measurement of office equipment consumable yield

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Pole Material Testing Equipment

ASHRAE 32.2-2018 Methods of Testing for Rating Premix and Postmix Beverage Dispensing Equipment

VN-TCVN, Pole Material Testing Equipment

TCVN 5442-1991 Textiles materials.Textile threads.Method for determination the imperfection by the USTER equipment

European Committee for Electrotechnical Standardization（CENELEC）, Pole Material Testing Equipment

EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
EN 60404-14:2002 Magnetic materials Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method

Professional Standard - Electron, Pole Material Testing Equipment

SJ/Z 9132-1987 Tests for flammability of plastic materials used for parts and components in electric devices and equipment

IPC - Association Connecting Electronics Industries, Pole Material Testing Equipment

IPC 9850-TM-K-2002 Test Materials Kit for Surface Mount Placement Equipment Standardization - components negative image - WITHOUT white backgrounds
IPC 9850-TM-KW-2002 Test Materials Kit for Surface Mount Placement Equipment Standardization - components negative image - WITH white backgrounds
IPC QL-653-1988 Qualification of Facilities That Inspect/Test Printed Boards@ Components@ and Materials
IPC QL-653A CD-1997 Certification of Facilities That Inspect/Test Printed Boards@ Components and Materials

IN-BIS, Pole Material Testing Equipment

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Pole Material Testing Equipment

IPC QL-653A-1997 Certification of Facilities That Inspect/Test Printed Boards, Components and Materials

U.S. Military Regulations and Norms, Pole Material Testing Equipment

ARMY AR 70-38-1979 RESEARCH DEVELOPMENT, TEST AND EVALUATION OF MATERIEL FOR EXTREME CLIMATIC CONDITIONS, REPRINT INCORPORATES CHANGE 1

IEC - International Electrotechnical Commission, Pole Material Testing Equipment

TS 62885-1-2016 Surface cleaning appliances – Part 1: General requirements on test material and test equipment (Edition 1.0)
TS 62885-1-2018 Surface cleaning appliances - Part 1: General requirements on test material and test equipment (Edition 2.0)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Pole Material Testing Equipment

GB/T 35513.2-2017 Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties

未注明发布机构, Pole Material Testing Equipment

BS 7539:1992(1999) Methods for test for Determination of properties of cushioning materials for package design purposes
BS 1610-1:1992(1999) Materials testing machines and force verification equipment — Part 1 : Specification for the grading of the forces applied by materials testing machines whenused inthe compression mode
BS 2782-11-Method 1150B:1998(1999) Methods of testing plastics — Part 11 : Thermoplastics pipes, fittings and valves — Method 1150B : Plastics pipes and fittings — Preparation of polyethylene (PE) pipe / pipe or pipe / fitting test piece assemblies by butt fusion
BS EN ISO 9988-2:2015 Plastics — Polyoxymethylene (POM) moulding and extrusion materials Part 2 : Preparation of test specimens and determination of properties

Professional Standard - Medicine, Pole Material Testing Equipment

YY/T 1400-2016 Dentistry.Materials used for dental equipment surfaces.Determination of resistance to chemical disinfectants
YY/T 1400--2016/ISO 21530:2004 Determination of resistance of surface materials of dental equipment to chemical disinfectants
YY/T 1400--2016/ISO21530:2004

ES-AENOR, Pole Material Testing Equipment

UNE 53-310-1987

CEN - European Committee for Standardization, Pole Material Testing Equipment

EN ISO 26203-1:2018 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems
EN ISO 1873-2:1997 Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties (Incorporates Amendment A1: 2000)
EN ISO 1872-2:1997 Plastics - Polyethylene (PE) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties (Incorporates Amendment A1: 2000)

PT-IPQ, Pole Material Testing Equipment

National Association of Pipe Fabricators (NAPF), Pole Material Testing Equipment

PFI ES-42-2002 STANDARD FOR POSITIVE MATERIAL IDENTIFICATION OF PIPING COMPONENTS USING PORTABLE X-RAY EMISSION TYPE TEST EQUIPMENT

Indonesia Standards, Pole Material Testing Equipment

SNI 03-6804-2002 Manual for laboratory preparation of chemical-grouted soil test specimen for obtaining design strength parameter