ZH
RU
ES

Specific Surface of Particle Size Analyzer

Specific Surface of Particle Size Analyzer, Total:328 items.

In the international standard classification, Specific Surface of Particle Size Analyzer involves: Linear and angular measurements, Equipment for the metallurgical industry, Mining and quarrying, Equipment for the chemical industry, Manufacturing forming processes, Testing of metals, Powder metallurgy, Particle size analysis. Sieving, Products of the chemical industry, Metalliferous minerals, Plastics, Geology. Meteorology. Hydrology, Fuels, Coatings and related processes used in aerospace industry, Thermodynamics and temperature measurements, Surface treatment and coating, Construction materials, Machine tool systems, Analytical chemistry, Optics and optical measurements, Gears, On-board equipment and instruments, Air quality, Road engineering, Soil quality. Pedology, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Materials and components for railway engineering, Adhesives, Milk and milk products, Metrology and measurement in general, Measurement of fluid flow, Paint coating processes, Items of art and handicrafts, Mechanical testing, Non-textile floor coverings, Measurement of volume, mass, density, viscosity, Waxes, bituminous materials and other petroleum products, Electrical equipment for working in special conditions, Quality, Occupational safety. Industrial hygiene.


British Standards Institution (BSI), Specific Surface of Particle Size Analyzer

  • BS EN 1370:1997 Founding - Surface roughness inspection by visual tactile comparators
  • BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
  • BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
  • BS EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
  • BS ISO 20804:2022 Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
  • BS EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
  • 21/30372607 DC BS ISO 20804. Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
  • BS EN ISO 14644-9:2012 Cleanrooms and associated controlled environments. Classification of surface cleanliness by particle concentration
  • BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
  • BS EN ISO 14644-9:2022 Tracked Changes. Cleanrooms and associated controlled environments. Assessment of surface cleanliness for particle concentration
  • BS EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast
  • BS PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
  • PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
  • BS ISO 21270:2005 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
  • BS EN 15758:2010 Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects
  • BS EN ISO 13565-2:1998 Geometric Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Height characterization using the linear material ration curve
  • BS EN ISO 13565-2:1997 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the linear material ration curve
  • BS EN ISO 14644-13:2017 Cleanrooms and associated controlled environments. Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications

Indonesia Standards, Specific Surface of Particle Size Analyzer

  • SNI 13-6977-2003 Mineral grain - Determination of specific surface area using test methods of Lea and Nurse permeabilities
  • SNI 05-4533-1998 Instruments for the measurement of surface roughness by the profile method- Contact (stylus) instrumens of progressive profile transformation - Profile recording instrument
  • SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.
  • SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)

European Committee for Standardization (CEN), Specific Surface of Particle Size Analyzer

  • EN 1370:1996 Founding - Surface Roughness Inspection by Visual Tactile Comparators
  • EN ISO 8503-4:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast -Cleaned Steel Substrates - Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of
  • EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
  • EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
  • EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
  • EN ISO 4518:1995 Metallic Coatings - Measurement of Coating Thickness - Profilometric Method (ISO 4518:1990)
  • EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
  • EN ISO 8503-2:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel - Comparator Proce
  • EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
  • EN ISO 8503-1:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 1: Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of Abr
  • EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
  • EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
  • EN ISO 14644-9:2022 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022)
  • EN ISO 8503-3:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 3: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of S
  • EN 15758:2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
  • EN 12373-13:2000 Aluminium and Aluminium Alloys - Anodizing - Part 13: Measurement of Reflectance Characteristics of Aluminium Surfaces Using a Goniophotometer or an Abridged Goniophotometer
  • EN ISO 14644-13:2017 Cleanrooms and associated controlled environments - Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications

Association Francaise de Normalisation, Specific Surface of Particle Size Analyzer

  • NF A04-195:1997 Founding. Surface roughness inspection by visualtactile comparators.
  • NF A91-114:1995 Metallic coatings. Measurement of coating thickness. Profilometric method.
  • NF T35-503-4*NF EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4 : method for the calibration of ISO surface profile comparators and for the determination of s
  • NF T35-503-4:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 4 : method for the calibration of ISO surface profile comparators and for the determination of sur
  • NF A91-490*NF EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using agoniophotometer or an abridged goniophotometer
  • NF E05-051:1981 Surface texture. Measurement devices. Roughness comparison specimens.
  • NF X21-055:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales.
  • NF P18-622-5*NF EN 933-5:1998 Tests for geometrical properties of aggregates. Part 5 : determination of percentage of crushed and broken surfaces in coarse aggregate particles.
  • NF EN ISO 25178-700:2023 Spécification géométrique des produits (GPS) - Etat de surface : Surfacique - Partie 700 : Etalonnage, ajustage et vérification d'instruments de mesure de la topographie des surfaces
  • NF P98-218-3:1995 Tests relating to pavements. Evenness tests. Part 3 : determination of longitudinal evennes indexes calculated from profilometer data.
  • NF EN ISO 25178-601:2010 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 601 : caractéristiques nominales des instruments à contact (à palpeur)
  • NF EN ISO 14644-9:2022 Salles propres et environnements maîtrisés apparentés - Partie 9: Evaluation de la propreté des surfaces par la concentration de particules
  • NF EN ISO 25178-701:2010 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 701 : étalonnage et étalons de mesure pour les instruments à contact (à palpeur)
  • NF T35-503-3*NF EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3 : method for the calibration of ISO surface profile comparators and for the determination of s
  • NF T35-503-3:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 3 : method for the calibration of ISO surface profile comparators and for the determination of sur
  • NF EN ISO 25178-606:2015 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 606 : caractéristiques nominales des instruments sans contact (à variation focale)
  • NF T35-503-1:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 1 : specifications and definitions for ISO surface profile comparators for the assessment of abras
  • NF EN ISO 25178-607:2019 Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 607 : caractéristiques nominales des instruments sans contact (microscopie confocale)
  • NF X80-010*NF EN 15758:2010 Conservation of cultural property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects.
  • NF EN 15758:2010 Conservation des biens culturels - Méthodes et instruments de mesure de la température de l'air et de la surface des objets
  • NF EN ISO 25178-602:2010 Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 602 : caractéristiques nominales des instruments sans contact (à capteur confocal chromatique)
  • NF EN ISO 25178-604:2013 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 604 : caractéristiques nominales des instruments sans contact (à interférométrie par balayage à cohérence)
  • NF E05-022:1998 Geometrical Product Specifications (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 2 : height characterization using the linear material ratio curve.
  • NF ISO 23812:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Méthode pour l'étalonnage de la profondeur pour le silicium à l'aide de matériaux de référence à couches delta multiples
  • NF ISO 17973:2006 Analyse chimique des surfaces - Spectromètres d'électrons Auger à résolution moyenne - Étalonnage des échelles d'énergie pour l'analyse élémentaire

Group Standards of the People's Republic of China, Specific Surface of Particle Size Analyzer

Professional Standard - Chemical Industry, Specific Surface of Particle Size Analyzer

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Specific Surface of Particle Size Analyzer

  • SP 112 COMPARATOR-2016 Quality Standard For Evaluation Of Cast Surface Finishes – Visual and Tactile Method – Three Dimensional Cast Surface Comparator

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Specific Surface of Particle Size Analyzer

  • GB/T 6060.1-1997 Roughness comparison specimens. Cast surfaces
  • GB/T 6060.4-1988 Roughness comparison specimens--Polished surfaces
  • GB/T 2596-1981 Tungsten powder and tungsten carbide powder--Determination of specific surface product(average graininess)--Simplified nitrogen absorption method
  • GB/T 6060.3-1986 Roughness comparison specimens--Spark-erosion machining surfaces
  • GB/T 11107-1989 Metallic and its compound powder--Determination of specific surface and particle size by air permeating method
  • GB/T 6060.5-1988 Roughness comparison specimens--Shot-blasted and grit-blasted surfaces
  • GB/T 14495-1993 Roughness comparison specimens for wooden pieces
  • GB/T 7702.21-1997 Standard test method for granular activated carbon from coal--Determination of specific surface area
  • GB/T 6060.2-1985 Roughness comparison specimens--Ground, turned, bored,milled, shaped and planed
  • GB/T 6060.2-2006 Roughness comparison specimens - Ground, turned, bored, milled, shaped and planed
  • GB/T 19146-2010 Infrared devices for instant screening of human skin temperature
  • GB/T 7702.20-2008 Test method for granular activated carbon from coal.Determination of pore volume and specific surface area
  • GB/T 14495-2009 Geometrical Product Specifications(GPS).Surface texture:Profile method.Roughness comparison specimens for wooden pieces
  • GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface profil
  • GB/T 6060.3-2008 Surface roughness comparison specimen.Part 3:Spark-eroded,shot-blasted,gritp-blasted,lapped,filed and polished surface
  • GB/T 13288-1991 The assessment of profile grades of steel surface before application of paint and related products.Comparator
  • GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the calibration of ISO surface profile comparators and for the determination of surface
  • GB/T 19146-2003 General requirements for infrared devices for instant screening of human skin temperature
  • GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-c
  • GB/T 20506-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
  • GB/T 31225-2014 Test method for the thickness of silicon oxide on Si substrate by ellipsometer
  • GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale
  • GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
  • GB/T 25915.13-2022 Cleanrooms and associated controlled environments—Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications

National Metrological Verification Regulations of the People's Republic of China, Specific Surface of Particle Size Analyzer

  • JJG(建材) 107-1999 Verification regulation for determination specific surface area of air permeability apparatus
  • JJG 285-1993 Verification Regulation of Moving Coil Temperature Indicating Instrument with Time Proportional or PID Action

Korean Agency for Technology and Standards (KATS), Specific Surface of Particle Size Analyzer

  • KS B 0507-1975 Roughness Comparison Specimens
  • KS B 0507-1986 Roughness Comparison Specimens
  • KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
  • KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
  • KS M 3817-2002 Methods for comparison of surface roughness of plastics
  • KS M 3817-1982 Methods for comparison of surface roughness of plastics
  • KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
  • KS B 0507-1975(2011) Roughness Comparison Specimens
  • KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
  • KS B 0506-2016 Instruments for the Measurement of Surface Roughness by the Interferometric Method
  • KS B 0501-2021 Instruments for the measurement of surface roughness by the stylus method
  • KS B 0506-2016(2021) Instruments for the Measurement of Surface Roughness by the Interferometric Method
  • KS B 0501-2016 Instruments for the measurement of surfaceroughness by the stylus method－Profile method
  • KS M ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface profile comparators and for the determination of surface
  • KS D ISO 4519:2009 Electrodeposited metallic coatings and related finishes－Sampling procedures for inspection by attributes
  • KS M ISO 8503-1-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 1：Specifications and definitions for ISO surf
  • KS M ISO 8503-2-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 2：Method for the grading of surface profile o
  • KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
  • KS M ISO 8503-4-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface p
  • KS M ISO 8503-4:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf
  • KS I ISO 14644-9:2014 Cleanrooms and associated controlled environments — Part 9: Classification of surface cleanliness by particle concentration
  • KS I ISO 14644-9:2019 Cleanrooms and associated controlled environments — Part 9:Classification of surface cleanliness by particle concentration
  • KS D ISO 15472:2003 Surface chemical analysis-X-ray photoelectron spectrometers-Calibration of energy scales
  • KS M ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 3：Method for the calibration of ISO surface profile comparators and for the determination of surface
  • KS F 2496-2012 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
  • KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
  • KS F 2446-2000 Standard test method of test for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
  • KS F 2446-1980 Standard test method of test for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
  • KS B ISO 13565-2-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve
  • KS M ISO 8503-1:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast cleaned steel substrates — Part 1: Specifications and definitions for ISO

Japanese Industrial Standards Committee (JISC), Specific Surface of Particle Size Analyzer

  • JIS B 0659:1996 Roughness comparison specimens
  • JIS K 7104:1976 Methods for comparison of surface roughness of plastics
  • JIS B 0652:1973 Instruments for the measurement of surface roughness by the interferometric method
  • JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
  • JIS B 0671-2:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve

NL-NEN, Specific Surface of Particle Size Analyzer

Defense Logistics Agency, Specific Surface of Particle Size Analyzer

Taiwan Provincial Standard of the People's Republic of China, Specific Surface of Particle Size Analyzer

  • CNS 10793-1984 Roughness Comparison Specimens
  • CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method
  • CNS 14306-1-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Specifications and definitions for ISO surface profile comparators for the assessment of abrasive
  • CNS 14306.1-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Specifications and definitions for ISO surface profile comparators for the assessment of abrasive
  • CNS 14306-4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
  • CNS 14306.4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
  • CNS 14306.3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
  • CNS 14306-3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface

Standard Association of Australia （SAA）, Specific Surface of Particle Size Analyzer

  • AS 2382:1981 Surface roughness comparison specimens
  • AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water
  • AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks
  • AS 2148:2004 Milk and liquid milk products - Density hyrometers for use in products with a surface tension of approximately 45 mN/m

国家市场监督管理总局、中国国家标准化管理委员会, Specific Surface of Particle Size Analyzer

  • GB/T 11107-2018 Metallic and its compound powder—Determination of specific surface and particle size—Air permeating method
  • GB/T 6060.1-2018 Surface roughness comparison specimen—Part 1: Casting surface
  • GB/T 25915.9-2018 Cleanrooms and associated controlled environments—Part 9: Classification of surface cleanliness by particle concentration

Professional Standard - Military and Civilian Products, Specific Surface of Particle Size Analyzer

  • WJ 2250-1994 Verification Regulations for Activated Carbon Specific Surface Area Meter

International Organization for Standardization (ISO), Specific Surface of Particle Size Analyzer

  • ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
  • ISO 20804:2022 Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
  • ISO 643:2003 Steels - Micrographic determination of the apparent grain size
  • ISO 643:2012 Steels - Micrographic determination of the apparent grain size
  • ISO 2632-3:1979 Roughness comparison specimens — Part 3: Cast surfaces
  • ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
  • ISO 8503-4:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surf
  • ISO 15472:2010 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
  • ISO 15472:2001 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
  • ISO 4288:1985 Rules and procedures for the measurement of surface roughness using stylus instruments
  • ISO 1880:1974 Title missing - Legacy paper document
  • ISO 1880:1979 Instruments for the measurement of surface roughness by the profile method; Contact (stylus) instruments of progressive profile transformation; Profile recording instruments
  • ISO 21283:2018 Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)
  • ISO 1879:1974 Title missing - Legacy paper document
  • ISO 1879:1981 Instruments for the measurement of surface roughness by the profile method; Vocabulary Bilingual edition
  • ISO 1879:2009 Instruments for the measurement of surface roughness by the profile method; Vocabulary Bilingual edition
  • ISO 7759:1983 Anodizing of aluminium and its alloys; Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
  • ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
  • ISO 14644-9:2022 Cleanrooms and associated controlled environments — Part 9: Assessment of surface cleanliness for particle concentration
  • ISO 3274:1975 Instruments for the measurement of surface roughness by the profile method; Contact (stylus) instruments of consecutive profile transformation; Contact profile meters, system M
  • ISO 8503-3:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surf
  • ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
  • ISO 2449:1974 Milk and liquid milk products; Density hydrometers for use in products with a surface tension of approximately 45 mN/m
  • ISO 1878:1974 Title missing - Legacy paper document
  • ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
  • ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
  • ISO/TR 23173:2021 Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings
  • ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration
  • ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio
  • ISO/TR 22335:2007 Surface chemical analysis - Depth profiling - Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer
  • ISO 14644-13:2017 Cleanrooms and associated controlled environments — Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications
  • ISO/CD 17973 Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis

VN-TCVN, Specific Surface of Particle Size Analyzer

  • TCVN 4393-2009 Steels.Micrographic determination of the apparent grain size

RU-GOST R, Specific Surface of Particle Size Analyzer

  • GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
  • GOST 9378-1975 Surface roughness comparison specimens. Technical requirements
  • GOST 9847-1979 Optical instruments for surface roughness parameters measuring. Basis parameters and types
  • GOST 18961-1980 Diamond needles for suface roughness measurements. Technical conditions
  • GOST 8.661-2018 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring surface flatness parameters of optical surfaces up to 200 mm
  • GOST R 8.826-2013 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the amplitude of the ultrasonic displacement and the particle velocity of the surface of the solid bodies
  • GOST R IEC 61241-1-1-1999 Electrical apparatus for use in the presence of combustible dust. Part 1-1. Electrical apparatus protected by enclosures and surface temperature limitation. Specification for apparatus
  • GOST 4.449-1986 Product-quality index system. Optical instruments for control of surface roughness and quality. Nomenclature of indices

CZ-CSN, Specific Surface of Particle Size Analyzer

  • CSN 25 2302-1980 Surface roughness comparison specimens. echnical requirements
  • CSN 49 0212-1988 Wood surface roughness comparison specimens of wood. Technical requirements
  • CSN ISO 1879:1993 Instruments for the measurement of surface roughness by the profile method. Terminology
  • CSN 25 2300-1972 Classification of instruments and devices or measurement of the geometrical arameters of surface finish
  • CSN ISO 1880:1993 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of progressive profile transformation. Profile recording instruments
  • CSN ISO 3274:1994 Instruments for the measurement of surface roughness by the profile method.Contact(stylus)instruments of consecutive profile transformation.Contact profile meters,system M

National Metrological Technical Specifications of the People's Republic of China, Specific Surface of Particle Size Analyzer

  • JJF 1099-2003 Calibration Specification of Roughness Comparison Specimens
  • JJF 1099-2018 Calibration Specification for Roughness Comparison Specimens
  • JJF 1105-2003 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method
  • JJF 1105-2018 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method
  • JJF 1576-2016 Program of Pattern Evaluation of Infrared Devices for Instant Screening of Human Skin Temperature

TR-TSE, Specific Surface of Particle Size Analyzer

  • TS 929-1976 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD-VOCABULARY
  • TS 2578-1977 Roughness Comparison Specimens PART 1 : Turned, Ground, Bored, Milled, Shaped And Planed
  • TS 2216-1976 CLASSIFICAITON OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH
  • TS 2495-1977 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD - CONTACT (STYLUS) INSTRUMENTS OF CONSECUTIVE PROF?LE TRANSFORMATION - CONTACT PROF?LE METERS. SYSTEM M

Society of Automotive Engineers (SAE), Specific Surface of Particle Size Analyzer

HU-MSZT, Specific Surface of Particle Size Analyzer

RO-ASRO, Specific Surface of Particle Size Analyzer

  • STAS ISO 1879:1993 Instrumets for the measurement of surface roughness by the profile method. Vocabulary
  • STAS 5730/4-1987 Surfaces condition RULES FOR THE MEASURE- MENT OF SURFACE ROUGHNESS USING STYLUS INSTRUMENTS
  • STAS SR ISO 3274:1995 Instruments for the measurements of surface roughness by the profile method - Contact (stylus) instruments of consecutive profile transformation - Contact profile meters, system M
  • STAS SR ISO 1880:1994 Instruments for the measurement of surface roughness by the profile method - Contact (stylus) instruments of progressive profile transformation - Profile recording instruments.

VE-FONDONORMA, Specific Surface of Particle Size Analyzer

SAE - SAE International, Specific Surface of Particle Size Analyzer

AENOR, Specific Surface of Particle Size Analyzer

  • UNE 82303:1991 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROFILE METHOD. VOCABULARY
  • UNE 82305-3:1991 ROUGHNESS COMPARISON SPECIMENS. PART 3: CAST SURFACES.
  • UNE-EN 933-5:1999/A1:2005 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
  • UNE-EN ISO 13565-2:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO CURVE (ISO 13565-2:1996).
  • UNE-EN 933-5:1999 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 5: DETERMINATION OF PERCENTAGE OF CRUSHED AND BROKEN SURFACES IN COARSE AGGREGATE PARTICLES.
  • UNE 40242-1:1974 CARPETS. DETERMINATION OF MEASURED SURFACE PILE DENSITY AND MEASURED PILE FIBRE VOLUME RATIO.
  • UNE-EN ISO 14644-9:2014 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
  • UNE-EN 15758:2011 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
  • UNE 82302:1992 CLASSIFICATION OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH.
  • UNE-EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
  • UNE-EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su

SE-SIS, Specific Surface of Particle Size Analyzer

  • SIS 83 25 17-1973 Carpets. Determination of surface pile density and pile volume ratio
  • SIS SS-ISO 8503-4:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for
  • SIS SS-ISO 8503-3:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators
  • SIS SS-ISO 8503-2:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 1: Specifications and definitions for ISO sur- face profile comparators for
  • SIS SS-ISO 4288:1988 Rules and procedures for the measure- ment of surface roughness using stylus instruments

IN-BIS, Specific Surface of Particle Size Analyzer

International Federation of Trucks and Engines, Specific Surface of Particle Size Analyzer

AWS - American Welding Society, Specific Surface of Particle Size Analyzer

  • C4.1 SET-1977 Oxygen Cutting Surface Roughness Gauge and Chart for Criteria Describing Oxygen Cut Surfaces

Association of German Mechanical Engineers, Specific Surface of Particle Size Analyzer

  • VDI/VDE 2603-1990 Methods of surface measurement; measurement of profile bearing length ratio
  • VDI/VDE 2615-2006 Surface roughness measurement of cylindrical gears and bevel gears by means on stylus-type instruments
  • VDI/VDE 2602 Blatt 4-2014 Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement

未注明发布机构, Specific Surface of Particle Size Analyzer

  • DIN EN 1370:1997 Surface roughness inspection by visual tactile comparators
  • DIN EN ISO 8503-4:1995 Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the DIN determination of surface profile using a stylus instrument
  • BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
  • DIN EN 933-5:1998 Tests for geometrical properties of aggregates — Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
  • DIN EN ISO 8503-3:1995 Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the DIN determination of surface profile using a focusing microscope
  • BS EN ISO 13565-2:1998(1999) Geometric Product Specifications (GPS) — Surface texture : Profile method — Surfaces having stratified functional properties — Part 2 : Height characterization using linear material ratio curve

IT-UNI, Specific Surface of Particle Size Analyzer

GOSTR, Specific Surface of Particle Size Analyzer

  • GOST R 58868-2020 Instrument rolling bearings. Deviation from the roundness of the surfaces of parts. Measurement procedure

AT-ON, Specific Surface of Particle Size Analyzer

  • ONORM M 1114-1982 Measurement of surface roughness with contact (Stylus) Instruments
  • ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
  • ONORM S 1407-1976 Textile floor coverings; determination of surface pile density and pile fibre volume ratio of pile carpets

Professional Standard - Machinery, Specific Surface of Particle Size Analyzer

  • JB/T 7976-1999 Instrument for the measurement of surface roughness by the profile method.Terms
  • JB/T 7976-2010 Instrument for the measurement of surface roughness by the profile method-Terms
  • JB/T 8204-1996 Rolling bearing laser ball surface roughness measuring instrument

German Institute for Standardization, Specific Surface of Particle Size Analyzer

  • DIN EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
  • DIN EN ISO 14644-9:2022-10 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022); German version EN ISO 14644-9:2022
  • DIN EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
  • DIN EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
  • DIN EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
  • DIN EN ISO 8503-2:2012-06 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator pro...
  • DIN EN 15758:2010-12 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects; German version EN 15758:2010
  • DIN EN ISO 13565-2:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996); German version EN ISO 13565-2:1997
  • DIN ISO 15472:2020-05 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English
  • DIN EN ISO 8503-1:2013 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
  • DIN EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010); German version EN ISO 7759:2010

ZA-SANS, Specific Surface of Particle Size Analyzer

  • SANS 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method

Danish Standards Foundation, Specific Surface of Particle Size Analyzer

  • DS/EN ISO 4518:1995 Metallic coatings - Measurement of coating thickness - Profiliometric method
  • DS/ISO 1879:1981 Instruments for the measurement of surface roughness by the profile method. Vocabulary
  • DS/ISO 1880:1981 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of progressive profile transformation. Profile recording instruments
  • DS/EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration
  • DS/EN 933-5/A1:2005 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
  • DS/EN 933-5:1998 Tests for geometrical properties of aggregates - Part 5:Determination of percentage of crushed and broken surfaces in coarse aggregate particles
  • DS/ISO 3274:1981 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of consecutive profile transformation. Contact profile meters, system M
  • DS/ISO 1878:1989 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
  • DS/EN ISO 13565-2/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
  • DS/EN ISO 13565-2:1998 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
  • DS/EN 15758:2011 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
  • DS/EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
  • DS/EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
  • DS/ENV 1071-1:1993 Advanced technical ceramics. Methods of test for ceramic coatings. Part 1: Determination of coating thickness by contact probe profilometer

Institute of Electrical and Electronics Engineers (IEEE), Specific Surface of Particle Size Analyzer

  • IEEE 292/COR-2013 Errata to Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros
  • IEEE 292/COR-2010 Errata to Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros
  • IEEE 517/COR-2010 Specification format guide and test procedure for single-degree-of-freedom rate-integrating gyros; Errata
  • IEEE 517/COR-2014 Errata to Specification Format Guide and Test Procedure for Single-Degree-of-Freedom Rate-Integrating Gyros

ES-AENOR, Specific Surface of Particle Size Analyzer

ES-UNE, Specific Surface of Particle Size Analyzer

  • UNE-EN ISO 14644-9:2022 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022)

KR-KS, Specific Surface of Particle Size Analyzer

  • KS M ISO 8503-4-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf
  • KS I ISO 14644-9-2019 Cleanrooms and associated controlled environments — Part 9:Classification of surface cleanliness by particle concentration
  • KS D ISO 15472-2003(2023)
  • KS M ISO 8503-1-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast cleaned steel substrates — Part 1: Specifications and definitions for ISO

American Society for Testing and Materials (ASTM), Specific Surface of Particle Size Analyzer

  • ASTM D5767-95(1999) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
  • ASTM D5767-95(2012) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
  • ASTM D5651-21 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
  • ASTM D7127-17 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
  • ASTM C1252-03 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
  • ASTM C1252-06 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
  • ASTM C1252-98 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
  • ASTM D5767-95(2004) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
  • ASTM D8200-22 Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves
  • ASTM D5767-17 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
  • ASTM D5767-18 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
  • ASTM C1057-92(1998)e1 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
  • ASTM C1057-17 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
  • ASTM C1057-22 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer

Professional Standard - Railway, Specific Surface of Particle Size Analyzer

Lithuanian Standards Office , Specific Surface of Particle Size Analyzer

  • LST EN 933-5-2002 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
  • LST EN 933-5-2002/A1-2005 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
  • LST EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
  • LST EN 15758-2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
  • LST EN ISO 13565-2:2001 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996)
  • LST EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
  • LST EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su

PH-BPS, Specific Surface of Particle Size Analyzer

  • PNS ISO 14644-9:2021 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration

PL-PKN, Specific Surface of Particle Size Analyzer

  • PN Z04002 Arkusz 04-1974 Air purity protection Tests of dust physical properties Determination of static surface and statical surface dimension and pores dimension of dust particles

The American Road & Transportation Builders Association, Specific Surface of Particle Size Analyzer

  • AASHTO TP56-1999 Standard Test Method for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape, Surface Texture, and Grading) 2000 Edition

(U.S.) Ford Automotive Standards, Specific Surface of Particle Size Analyzer

  • FORD WSS-M1F25-B-2012 LEATHER, GENUINE FULL GRAIN, CHROME FREE, INSTRUMENT PANEL, DOOR TOP ROLL, CENTER CONSOLE, AND OTHER INTERIOR TRIM ***TO BE USED WITH FORD WSS-M99P1111-A***

Military Standard of the People's Republic of China-General Armament Department, Specific Surface of Particle Size Analyzer

  • GJB 3766-1999 Method for measuring the thickness of hard-based explosive foil of impact disk detonators - Surface profilometer method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Specific Surface of Particle Size Analyzer

  • GB/T 32999-2016 Surface chemical analysis—Depth profiling—Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer

  Shading ratio of particle size analyzer, Particle size analyzer specific surface area, Particle size analyzer + specific surface area, Specific Surface of Particle Size Analyzer, Shading ratio of particle size analyzer, Shading ratio of particle size analyzer.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved