ZH
RU
ES

electrode edge

electrode edge, Total:269 items.

In the international standard classification, electrode edge involves: Non-ferrous metals, Integrated circuits. Microelectronics, Paints and varnishes, Welding, brazing and soldering, Fasteners, Power transmission and distribution networks, Petroleum, petroleum products and natural gas handling equipment, Insulation, Rotating machinery, Printed circuits and boards, Iron and steel products, Domestic safety, Electronic tubes, Office machines, Information technology (IT) in general, Electrical wires and cables, Insulating materials, Insulating fluids, Telecommunication systems, Solar energy engineering, Optoelectronics. Laser equipment, Surface treatment and coating, Thermodynamics and temperature measurements, Electrical engineering in general, Capacitors, Electromechanical components for electronic and telecommunications equipment, Rubber and plastics products, Adhesives, Semiconductor devices, Energy and heat transfer engineering in general, Road vehicle systems, Cinematography, Electrical and electronic testing, Lamps and related equipment, Agricultural machines, implements and equipment.

工业和信息化部, electrode edge

YS/T 1193-2017 Cathode plate insulation sealing edge strip for electrolysis
QC/T 1136-2020 Environmental test requirements and test methods for insulated gate bipolar transistor (IGBT) modules for electric vehicles

Defense Logistics Agency, electrode edge

DLA SMD-5962-88550 REV C-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, EDGE-TRIGGERED, D-TYPE FLIP-FLOP, MONOLITHIC SILICON
DLA SMD-5962-90910 REV A-2005 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCE SCHOTTKY, TTL, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLOCK ENABLE, MONOLITHIC SILICON
DLA SMD-5962-89551 REV A-2001 MICROCIRCUITS, DIGITAL, HIGH SPEED CMOS, DUAL J-K POSITIVE EDGE-TRIGGERED FLIP-FLOP, MONOLITHIC SILICON
DLA DSCC-VID-V62/04722 REV A-2005 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-V ABT 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-89945 REV B-2006 MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, 8-BIT D-TYPE EDGE-TRIGGERED READ BACK LATCHES, MONOLITHIC SILICON
DLA MIL-PRF-39018/2 F-2009 CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE)(NONPOLARIZED), STYLES CU14 (UNINSULATED) AND CU15 (INSULATED)
DLA SMD-5962-88550 REV D-2008 MICROCIRCUIT, DIGITAL, BIPOLAR, EDGE TRIGGERED, D-TYPE FLIP-FLOP, MONOLITHIC SILICON
DLA MIL-C-39018/10 B-2009 CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE)(POLARIZED), ESTABLISHED RELIABILITY, STYLE CUR92 (INSULATED)
DLA CATS-2009 CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE) (POLARIZED), NON-ESTABLISHED RELIABILITY AND ESTABLISHED RELIABILITY STYLES CU16 (UNINSULATED), CU17 (INSULATED), AND CUR17 (INSULATED)
DLA MIL-PRF-39018/1 H-2009 CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE) (POLARIZED), NON-ESTABLISHED RELIABILITY AND ESTABLISHED RELIABILITY STYLES CU12 (UNINSULATED), CU13 (INSULATED), AND CUR13 (INSULATED)
DLA MIL-PRF-39018/6 D-2009 CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE) (POLARIZED), ESTABLISHED RELIABILITY STYLE CUR91 (INSULATED)
DLA SMD-5962-90845 REV B-2003 MICROCIRCUIT, LINEAR, 8-BIT A/D PERIPHERAL WITH SERIAL CONTROL, MONOLITHIC SILICON
DLA SMD-5962-89950 REV A-2006 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, DUAL NEGATIVE EDGE TRIGGERED JK FLIPFLOP WITH ASYNCHRONOUS SET AND CLEAR, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA MIL-PRF-39018/4 E-2009 CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE) (POLARIZED), NON-ESTABLISHED RELIABILITY AND ESTABLISHED RELIABILITY STYLES CU71 (INSULATED) AND CUR71 (INSULATED)
DLA SMD-5962-90516 REV B-2006 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, OCTAL D-TYPE EDGE-TRIGGERED FLIP FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-93147 REV A-2007 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-93148 REV A-1995 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLOCK ENABLE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-93149 REV C-2007 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-93201 REV B-1997 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-88728 REV C-2008 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, OCTAL D-TYPE EDGE TRIGGERED FLIP-FLOPS, MONOLITHIC SILICON
DLA MIL-PRF-39018/7 C-2009 CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE) (POLARIZED), (FOUR-TERMINAL), ESTABLISHED RELIABILITY STYLE CUR19 (INSULATED)
DLA SMD-5962-90864 REV A-1993 MICROCIRCUIT, DIGITAL, HCMOS MULTIFUNCTION PERIPHERAL, MONOLITHIC SILICON
DLA SMD-5962-91610 REV B-2007 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 9-BIT D FLIP-FLOP, POSITIVE EDGE TRIGGERED, WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-91611 REV A-2000 MICROCIRCUITS, DIGITAL, ADVANCED CMOS, 8-BIT D FLIP-FLOP, POSITIVE EDGE-TRIGGERED WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-95836 REV A-2008 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/04711 REV B-2011 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-V ABT 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/04722 REV B-2011 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-V ABT 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-88520 REV E-2007 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, DUAL D-TYPE POSITIVE EDGE-TRIGGERED FLIP-FLOP, MONOLITHIC SILICON
DLA SMD-5962-90516 REV C-2013 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/04676 REV A-2010 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-97549 REV A-2010 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS W/3-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-90910 REV B-2012 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCE SCHOTTKY, TTL, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLOCK ENABLE, MONOLITHIC SILICON
DLA MIL-DTL-24308/27 E-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, INSULATION DISPLACEMENT, SOCKET CONTACTS, NONENVIRONMENTAL
DLA SMD-5962-93201 REV C-2009 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

CZ-CSN, electrode edge

CSN 05 0025-1988 Welding. Shapes and dimensions of weld edges. Manual metal-arc wel-ding of steel with covered electrodes
CSN 41 7308-1985 Aluminium atrips with rounded edges for electrical purposes. Dimensions
CSN 42 1417-1985 Aluminium strips with rounded edges for electrical purposes. Technical delivery code

IPC - Association Connecting Electronics Industries, electrode edge

IPC 7721 4.6.3-1998 Edge Contact Repair@ Plating Method
IPC TM-650 2.5.5.1B-1986 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Insulating Material at 1 MHz (Contacting Electrode Systems)

IN-BIS, electrode edge

Society of Motion Picture and Television Engineers (SMPTE), electrode edge

SMPTE EG 2-1999 Edge Identification of Motion-Picture Raw Stock Containers
SMPTE 97-2004 Motion-Picture Film (16-mm) - 200-Mil Edge Position - Magnetic Audio Record
SMPTE ST 83-1996 For Motion-Picture Film (16-mm) - Edge Numbers - Location and Spacing
SMPTE 97-1999 Motion-Picture Film (16-mm) - 200-Mil Edge Position - Magnetic Audio Record
SMPTE ST 97-2004 Motion-Picture Film (16-mm) - 200-Mil Edge Position - Magnetic Audio Record

(U.S.) Ford Automotive Standards, electrode edge

FORD FLTM BI 127-1-2001 EDGE COVERAGE TEST FOR ELECTROCOAT MATERIALS
FORD FLTM BI 127-01-2001 EDGE COVERAGE TEST FOR ELECTROCOAT MATERIALS
FORD WSS-M64J39-A3-1998 MAKEUP FEED, WATERBORNE CATIONIC ELECTROCOAT, LEAD-FREE, HIGH THROW POWER, EDGE CORROSION RESISTANT, PIGMENT (Shown on WSS-M64J39-A1)
FORD WSS-M64J39-A2-1998 MAKEUP FEED, WATERBORNE CATIONIC ELECTROCOAT, LEAD-FREE, HIGH THROW POWER, EDGE CORROSION RESISTANT, RESIN (Shown on WSS-M64J39-A1)
FORD WSS-M64J41-A1-2000 PRIMER, WATERBORNE CATIONIC ELECTROCOAT, LEAD-FREE, HIGH THROW POWER, EDGE CORROSION RESISTANT, LOW BAKE-OFF LOSS, INITIAL FILL

British Standards Institution (BSI), electrode edge

BS EN ISO 22553-10:2023 Paints and varnishes. Electro-deposition coatings - Edge protection
BS EN ISO 9312:2013 Resistance welding equipment. Insulated pins for use in electrode back-ups
BS EN IEC 60034-27-4:2018 Rotating electrical machines. Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
BS 4215-15:1990 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for insulated pins for use in electrode back-ups
BS IEC 62899-402-2:2020 Printed electronics - Printability. Measurement of qualities. Edge waviness
BS EN 50643:2018+A1:2020 Electrical and electronic household and office equipment. Measurement of networked standby power consumption of edge equipment
21/30434682 DC BS ISO 22553-10. Paints and varnishes. Electro-deposition coating. Part 10. Edge protection
BS EN 1711:2000 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
BS EN ISO 17643:2015 Non-destructive testing of welds. Eddy current examination of welds by complex plane analysis
BS CECC 30201 001:1981 Harmonized detail specification for fixed tantalum capacitors - Porous anode, solid electrolyte - Cylindrical insulated/non-insulated metallic case, polar/hermetic seal, axial terminations - Basic plus additional assessment level
BS CECC 75100:1984 Harmonized system of quality assessment for electronic components. Sectional specification: two-part and edge socket connectors for printed board application
22/30466461 DC BS EN 63474 Ed.1. Electrical and electronic household and office equipment. Measurement of networked standby power consumption of edge equipment
17/30352670 DC BS IEC 62899-402-2. Printed Electronics. Part 402-2. Printability. Measurement of qualitities. Edge waviness

未注明发布机构, electrode edge

BS ISO 22553-10:2022 Paints and varnishes — Electro - deposition coatings Edge protection
BS EN IEC 63474:2023 Electrical and electronic household and office equipment — Measurement of networked standby power consumption of edge equipment
BS 1432:1987(2000) Specification for Copper for electrical purposes : high conductivity copper rectangular conductors with drawn or rolled edges

Korean Agency for Technology and Standards (KATS), electrode edge

KS C ISO 9312:2001 Resistance welding equipment-Insulated pins for use in electrode backs-ups
KS C ISO 9312:2015 Resistance welding equipment－Insulated pins for use in electrode backs-ups
KS C ISO 9312:2021 Resistance welding equipment —Insulated pins for use in electrode back-ups
KS C IEC 60245-6-2016(2021) Rubber insulated cables of rated voltages up to and including 450/750 V — Part 6: Arc welding electrode cables
KS C IEC 60245-6:2014 Rubber insulated cables of rated voltages up to and including 450/750 V — Part 6: Arc welding electrode cables
KS C IEC 60245-6:2005 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 6: Arc welding electrode cables
KS C IEC 60245-6:2016 Rubber insulated cables of rated voltages up to and including 450/750 V — Part 6: Arc welding electrode cables
KS C IEC 60727-2-2005(2010) Evaluation of electrical endurance of electrical insulation systems－Part 2：Evaluation procedures based on extreme－value distributions
KS C IEC 60727-2:2005 Evaluation of electrical endurance of electrical insulation systems-Part 2:Evaluation procedures based on extreme-value distributions
KS C IEC 60727-2:2015 Evaluation of electrical endurance of electrical insulation systems－Part 2：Evaluation procedures based on extreme－value distributions
KS C IEC 60189-2-2014(2019) Low-frequency cables and wires with PVC insulation and PVC sheath — Part 2: Cables in pairs, triples, quads and quintuples for inside installations

International Organization for Standardization (ISO), electrode edge

ISO 9312:1990 Resistance welding equipment; insulated pins for use in electrode back-ups
ISO 9312:2013 Resistance welding equipment.Insulated pins for use in electrode back-ups
ISO 22553-10:2022 Paints and varnishes — Electro-deposition coatings — Part 10: Edge protection
ISO 2376:2010 Anodizing of aluminium and its alloys - Determination of electric breakdown potential
ISO 21760-2:2019 Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 2: Edge seal methods
ISO 2376:1972 Anodization (anodic oxidation) of aluminium and its alloys; Insulation check by measurement of breakdown potential
ISO 490:1978 Cinematography — Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (type 1) — Positions and width dimensions

ZA-SANS, electrode edge

SANS 9312:1990 Resistance welding equipment - Insulated pins for use in electrode back-ups

RO-ASRO, electrode edge

STAS 9559-1982 Welded Joints SHAPES AND DIMENSION OF EDGES FOR ELECTROSLAG WELDING
STAS 6662-1987 Welded joints SHAPES AND DIMENSIONS OF EDGES FOR MANUAL ARC WELDING AND GAS WELDING
STAS 7043/4-1986 Non metallic coatings (inorganic) ANODIZING OF ALUMINIUM AND ITS ALLOYS Determination of breakdown potential of insulation coating

Group Standards of the People's Republic of China, electrode edge

T/CEC 599-2022 Proxy Interface Protocol for Power IoT Edge IoT
T/CEC 614-2022 Technical Requirements for Power IoT Edge IoT Proxy
T/CES 153-2022 Technical specification of the edge intelligent terminal for power inspection based on UAV
T/CAB 0102-2021 Household and similar electrical appliances-Safety– Judgment method for sharpness of edges
T/CEC 155-2018 General requirements for crimp-type insulated-gate bipolar transistor (IGBT) devices for flexible power transmission
T/CES 084-2021 Test specification for application reliability of insulated-gate bipolar transistor (IGBT) modules for high-voltage direct current (HVDC) transmission using voltage sourced converters (VSC)

Association Francaise de Normalisation, electrode edge

NF A82-197:1995 Resistance welding equipment. Insulated pins for use in electrode back-ups.
NF C83-401:1987 Electronic Components Two parts and edge socket connectors for printed board application
NF EN ISO 22553-10:2023 Peintures et vernis - Peintures d'électrodéposition - Partie 10 : protection des arêtes
NF EN ISO 9312:2013 Équipement de soudage par résistance - Fiches isolées utilisées dans les contre-électrodes
NF A82-197*NF EN ISO 9312:2013 Resistance welding equipment - Insulated pins for use in electrode back-ups
UTE C15-150-22U*UTE C15-150-22:2001 Protective insulating sleeve used for protection of electrodes and connections
NF C51-127-4*NF EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4 : measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
NF C66-534:1974 Insulators and fittings for overhead lines. Glass insulators sub-station single-pole lead-in panels.
NF EN IEC 60034-27-4:2018 Machines électriques tournantes - Partie 27-4 : mesure de la résistance d'isolement et de l'index de polarisation sur le système d'isolation des enroulements des machines électriques tournantes
NF C77-643*NF EN 50643:2018 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment
NF C77-643/A1*NF EN 50643/A1:2020 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment
NF A91-483:2010 Anodizing of aluminium and its alloys - Determination of electric breakdown potential.
NF A91-405:1983 Anodizing of aluminium and its alloys. Insulation check by measuring breakdown potential.

Professional Standard - Petroleum, electrode edge

SY/T 0086-2003 The electrical isolation of cathodically protected pipelines
SY/T 0086-2012 Electrical isolation of cathodically protected pipelines
SY/T 0086-1995 Electrical isolation of cathodically protected pipelines

国家能源局, electrode edge

SY/T 0086-2020 Standards for electrical insulation of cathodically protected pipelines

Aerospace Industries Association/ANSI Aerospace Standards, electrode edge

AIA/NAS NAS 1387-1984 Splice, Electric, Permanent, Crimp Style, Uninsulated (Class 2) (Rev. 3)
AIA/NAS NAS 1388-1999 Splice Electric, Permanent, Crimp Style, Pre-Insulated, (Class 2) Wire Sizes 10 to 26 Revision 9; FSC5940
AIA/NAS NAS 1389-1964 Splice, Electric, Permanent, Crimp Style, Pre-Insulated (Class 2) Wire Sizes 8 to 1/0 (Rev. 2)

ETSI - European Telecommunications Standards Institute, electrode edge

GS MEC 012-2017 Mobile Edge Computing (MEC); Radio Network Information API (V1.1.1)

Professional Standard - Machinery, electrode edge

JB/T 10257-2001 Resistance welding equipment - Insulated pins for use in electrode back-ups
JB/T 5810-2007 Test specifications of interturn insulation of field pole coil and field winding for electrical machines
JB/T 5810-1991 Specification for inter-turn insulation test of motor pole coil and field winding

European Committee for Standardization (CEN), electrode edge

EN ISO 9312:2013 Resistance welding equipment - Insulated pins for use in electrode back-ups
EN ISO 9312:1994 Resistance Welding Equipment - Insulated Pins for Use in Electrode Back-ups (ISO 9312 : 1990)
EN ISO 22553-10:2023 Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553-10:2022)
HD 383 S2-1986 Conductors of insulated cables; guide to the dimensional limits of circular conductors
EN ISO 2376:2019 Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
EN ISO 2376:2010 Anodizing of aluminium and its alloys - Determination of electric breakdown potential (ISO 2376:2010)
HD 383 S2 A1-1989 Conductors of insulated cables; first supplement: guide to the dimensional limits of circular conductors

KR-KS, electrode edge

KS C ISO 9312-2021 Resistance welding equipment —Insulated pins for use in electrode back-ups
KS C IEC 60245-6-2016 Rubber insulated cables of rated voltages up to and including 450/750 V — Part 6: Arc welding electrode cables
KS A ISO 490-2003(2023) Cinematography - Magnetic stripes and magnetic recording head gaps for Sound record on 16mm motion-picture film perforated along one edge (Type 1) - Positions and width dimensions
KS C IEC 60335-2-91-2013(2023) Household and similar electrical appliances ― Safety ― Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge

German Institute for Standardization, electrode edge

DIN EN ISO 22553-10:2023-03 Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553-10:2022); German version EN ISO 22553-10:2023
DIN 55655-10:2020 Paints and varnishes - Electro-deposition paints - Part 10: Edge protection
DIN 49984:1954-11 Electric luminaires; profile sealing ring for luminaire glasses with flanged edges according to DIN 49993
DIN EN 50643/A1:2021-03 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment; German version EN 50643:2018/A1:2020 / Note: DIN EN 50643 (2018-07) remains valid alongside this standard until 2023-02-19.
DIN EN 50643:2018-07 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment; German version EN 50643:2018 / Note: A transition period, as set out in DIN EN 50643/A1 (2021-03), exists until 2023-02-19.
DIN EN ISO 9312:2013-12 Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013); German version EN ISO 9312:2013
DIN EN ISO 22553-10:2023 Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553-10:2022)
DIN EN ISO 2376:2010 Anodizing of aluminium and its alloys - Determination of electric breakdown potential (ISO 2376:2010); German version EN ISO 2376:2010
DIN EN ISO 9312:2013 Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013); German version EN ISO 9312:2013
DIN EN 50643/A1:2021 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment; German version EN 50643:2018/A1:2020
DIN 72588:2004 Road vehicles - Open crimp barrels for assembling low-tension cables of thin insulation wall thickness by hand crimping tools

国家市场监督管理总局、中国国家标准化管理委员会, electrode edge

GB/T 20833.4-2021 Rotating electrical machines—The winding insulation—Part 4: Measurement of insulation resistance and polarization index

Danish Standards Foundation, electrode edge

DS/EN ISO 9312:2013 Resistance welding equipment - Insulated pins for use in electrode back-ups

Professional Standard - Electricity, electrode edge

DL/T 2605-2023
DL/T 474.1-2006 Guide for insulation test on site Insulation resistance、dielectric absorption ratio and polarization index test
DL/T 474.1-2018 Insulation Resistance, Absorption Ratio and Polarization Index Tests
DL 474.1-1992 Insulation Resistance, Absorption Ratio and Polarization Index Tests
DL/T 1550-2016 Method for Determination of Copper and Iron Content in Mineral Insulating Oil Rotating Disk Electrode Emission Spectrometry

Lithuanian Standards Office , electrode edge

LST EN ISO 9312:2013 Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013)
LST EN ISO 9312:2000 Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:1990)

American National Standards Institute （ANSI), electrode edge

ANSI/ASTM A971:2000 Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
ANSI/IEEE 1:2000 General Principles for Temperature Limits in the Rating of Electric Equipment and for the Evaluation of Electrical Insulation
ANSI/ASTM D1830:1999 Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method (10.01)
ANSI/ASTM D5288:2010 Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ANSI C78.1430-1997 Slide Projection Lamps, Condensing, Dichroic,1.65 in. (42 mm), Integral-Reflector, Rim Reference TH Lamps with GX5.3 Base

American Society for Testing and Materials (ASTM), electrode edge

ASTM A971/A971M-17 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
ASTM D1816-12 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
ASTM D1816-12(2019) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
ASTM D877-00 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-87(1995) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-02e1 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-02 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877/D877M-19 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-02(2007) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877/D877M-13 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM A971/A971M-05 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
ASTM A971/A971M-10 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
ASTM D1816-97 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
ASTM A971-00 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
ASTM D1816-03 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
ASTM D1816-04 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
ASTM D5288-97(2004) Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D1830-99 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D1830-99(2005) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D5288-97 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D5288-14 Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D5288-21 Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D5288-10 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)

AENOR, electrode edge

UNE-EN ISO 9312:2013 Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013)

RU-GOST R, electrode edge

GOST 18720.18-1985 Television camera tubes. Methods of measuring insulation resistance and leakage cuvvent between electrodes
GOST IEC 60245-6-2011 Rubber insulated cables of rated voltages up to and including 450/750 V. Arc welding electrode cables
GOST 24613.8-1983 Optoelectronic integrated microcircuits and optocouples. Methods for measuring of critical change rate of dielectric voltage
GOST 19438.3-1974 Low-power electronic tubes and valves. Method of measurement of insulation resistance between electrodes and between electrodes and all other elements of tubes and valves

European Committee for Electrotechnical Standardization（CENELEC）, electrode edge

EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
EN IEC 63474:2023 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment
EN 50643:2018 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment

International Electrotechnical Commission (IEC), electrode edge

IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines
IEC 62899-402-2:2020 Printed electronics - Part 402-2: Printability - Measurement of qualities - Edge waviness
IEC 60245-6:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
IEC 60245-6:1980 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 6 : Arc welding electrode cables
IEC 60245-6:1994/AMD1:1997 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables; Amendment 1
IEC 60245-6:1994/AMD2:2003 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables; Amendment 2
IEC TR2 60727-2:1993 Evaluation of electrical endurance of electrical insulation systems; part 2: evaluation procedures based on extreme-value distributions

ES-UNE, electrode edge

UNE-EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN 50643:2019/A1:2021 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment
UNE-EN 50643:2019 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment
UNE-EN ISO 22553-10:2023 Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553-10:2022)

HU-MSZT, electrode edge

MSZ 10906/13.lap-1964

PL-PKN, electrode edge

PN-EN 50643-2018-06/A1-2021-02 E Electrical and electronic household and office equipment -- Measurement of networked standby power consumption of edge equipment
PN M69018-1988 Welding Elektroslag welding of carbon and Iow alloy steels Preparation of the edges before welding
PN M69016-1990 Welding Carbon dioxide or gas mixtures shielded arc welding of carbon and Iow alloy steels Preparation of the edges before , welding

IX-IX-IEC, electrode edge

IEC 63474:2023 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment

SE-SIS, electrode edge

SIS SS-ISO 2376:1985 Anodization (anodic oxidation) of aluminium and its alloys - Insulation check by measurement of breakdown potential
SIS SS-CECC 75100-1992 Sectional specifica tion: Two part and edge socket connectors for printedboard application
SIS SS CECC 75101-1985 Example detail specification/ Blank detail specification:

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, electrode edge

GB/T 8754-2006 Anodizing of aluminium and its alloys. Insulation check.by measurement of breakdown potential
GB/T 28509-2012 Ultrafine coaxial cables with insulation diameter below 1 mm and cable assemblies
GB/T 3789.12-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of interelectrode insulation
GB/T 22717-2008 Test specifications of interturn insulation of field pole coil and field winding for electrical machines
GB/T 3789.18-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of high frequency loss for interelectrode insulators
GB/T 8754-1988 Anodizing of aluminium and aluminium alloys--Insulation check by measurement of breakdown potential
GB 8754-1988 Aluminum and aluminum alloy anodic oxidation application breakdown potential measurement method to test insulation
GB/T 23756.2-2010 Evaluation of electrical endurance of electrical insulation systems.Part 2:Evaluation procedures based on extreme-value distributions
GB/T 18134.1-2000 High-voltage testing techniques with very fast impulses Part 1: Measuring systems for very fast front overvoltages generated in gas-insulated substations

Underwriters Laboratories (UL), electrode edge

UL 2459 BULLETIN-2010 UL Standard for Safety Insulated Multi-Pole Splicing Wire Connectors
UL 2459 BULLETIN-2017 UL Standard for Safety Insulated Multi-Pole Splicing Wire Connectors (COMMENTS DUE: January 15@ 2018)
UL 2459 BULLETIN-2013 UL Standard for Safety Insulated Multi-Pole Splicing Wire Connectors (COMMENTS DUE: September 09@ 2013)
UL 2459 BULLETIN-2018 UL Standard for Safety Insulated Multi-Pole Splicing Wire Connectors (COMMENTS DUE: June 4@ 2018)

AR-IRAM, electrode edge

IRAM 2057-1952

ECIA - Electronic Components Industry Association, electrode edge

535ABAE-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Silver Case@ Axial Lead@ Elastomeric Seal@ Polarized@ Nickel Positive@ Copper Negative Leads@ Insulated
535AAAA-1987 Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals Hermetically Sealed@ Axial Lead@ Polarized@ Insulated
535AAAE-1987 Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals Rectangular@ Subminiature@ Non-Hermetically Sealed@ Plastic Encapsulated@ Polarized Insulated@ Axial Lead
535AAAF-1987 Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals Rectangular@ Subminiature@ Non-Hermetically Sealed@ Plastic Encapsulated@ Polarized@ Insulated@ Radial Lead

Japanese Industrial Standards Committee (JISC), electrode edge

JIS C 3663-6:2007 Rubber insulated cables -- Rated voltages up to and including 450/750V -- Part 6: Arc welding electrode cables
JIS C 3663-6:1998 Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 6: Arc welding electrode cables
JIS C 3663-6:2003 Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 6: Arc welding electrode cables

AT-ON, electrode edge

ONORM M 7801 Teil.5-1981 Edge preparation; shapes of grooves for not füll penetrated cross sections for arc welding on steel
ONORM M 7801 Teil.2-1981 Edge preparation; shapes of grooves for gas-shielded tungsten-arc welding and gas-shielded metal arc welding on steel

Institute of Electrical and Electronics Engineers (IEEE), electrode edge

IEEE Std 433-2009 IEEE Recommended Practice for Insulation Testing™ of AC Electric Machinery with High Voltage at Very Low Frequency - Redline
IEEE Unapproved Draft Std P433/D16 Oct 2009 Draft Recommeded Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency
IEEE 1-2000 Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation
IEEE 1-1986 General principles for temperature limits in the rating of electric equipment and for the evaluation of electrical insulation
SMPTE ST 83:1996 ST 83:1996 - SMPTE Standard - For Motion-Picture Film (16-mm) — Edge Numbers — Location and Spacing
SMPTE ST 97:2004 ST 97:2004 - SMPTE Standard - Motion-Picture Film (16-mm) — 200-Mil Edge Position — Magnetic Audio Record
ST 97:2004 ST 97:2004 - SMPTE Standard - Motion-Picture Film (16-mm) — 200-Mil Edge Position — Magnetic Audio Record
IEEE 433-2022 IEEE Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage Rating up to 30 kV at Very Low Frequency
IEEE P433/D9, December 2021 IEEE Approved Draft Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage Rating up to 30 kV at Very Low Frequency
IEEE P433/D7, June 2020 IEEE Draft Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage Rating up to 30 kV at Very Low Frequency
IEEE P433/D8, October 2021 IEEE Draft Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage Rating up to 30 kV at Very Low Frequency

TH-TISI, electrode edge

TIS 955.6-2011 Rubber insulated cables.rated voltages up to and including 450/750 v.part 6: arc welding electrode cables

IET - Institution of Engineering and Technology, electrode edge

THEO EDGE DIFF ELECTRO-2009 Theory of Edge Diffraction in Electromagnetics: Origination and validation of the physical theory of diffraction

VE-FONDONORMA, electrode edge

COVENIN 397-1976

CO-ICONTEC, electrode edge

CENELEC - European Committee for Electrotechnical Standardization, electrode edge

HD 383 S2/A2-1993 Conductors of Insulated Cables First Supplement: Guide to the Dimensional Limits of Circular Conductors

IECQ - IEC: Quality Assessment System for Electronic Components, electrode edge

QC 300202/US 0005-1985 Specifications for Use in Electronic Equipment: Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode; Silver Case@ Axial Lead@ Elastomeric Seal@ Polarized@ Nickel Positive@ Copper Negative Leads Insulated
QC 300201/ US 0001-1986 Capacitors for Use in Electronic Equipment Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals Hermetically Sealed@ Axial Lead@ Polarized@ Insulated
QC 300301/ JP 0001-1986 Electronic Components: Aluminium Electrolytic Capacitors with Non-Solid Electrolyte; (tubular@ Polar@ Metallic Case@ Insulated@ Radial Terminations)
QC 300301/ GB 0002-1989 Aluminium Electrolytic Capacitors with Non-Solid Electrolyte@ Cylindrical@ Polar Insulated Case@ Rigid Pin and Tag Solder Terminations
QC 300301/ GB 0001-1989 Aluminium Electrolytic Capacitors with Non-Solid Electrolyte@ Cylindrical@ Polar@ Insulated Case@ Screw Terminations@ Not for Printed Board Applications

Indonesia Standards, electrode edge

SNI IEC 60245-6:2012 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables

Professional Standard - Aerospace, electrode edge

QJ 483-1990 Test method for breakdown voltage of aluminum and aluminum alloy insulating anodized film layer
QJ 483-1979 Test method for dielectric strength of aluminum and aluminum alloy insulating anodized film layer

Electronic Components, Assemblies and Materials Association, electrode edge

ECA 535ABAE-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Silver Case, Axial Lead, Elastomeric Seal, Polarized, Nickel Positive, Copper Negative Leads, Insulated

TR-TSE, electrode edge

TS 2393-1976 ANODIZATION (ANODIC OXIDATION) OF ALUMINI?M AND ITS ALLOYS INSULATION CHECK BY MEASUREMENT OF BREAKDOWN POTENTIAL

YU-JUS, electrode edge

JUS C.T7.240-1984 Anodic oxidation ofaluminium and aluminium alloys. Insulation check by measurement ofbreakdown potential

ES-AENOR, electrode edge

CH-SNV, electrode edge

SNV 95805-1951