ZH
RU
ES

Screw Micro Vials

Screw Micro Vials, Total:496 items.

In the international standard classification, Screw Micro Vials involves: Fluid storage devices, Bottles. Pots. Jars, Linear and angular measurements, Valves, Screw threads, Ground service and maintenance equipment, Analytical chemistry, Fasteners, Optical equipment, Glass, Metrology and measurement in general, Pipeline components and pipelines, Electrical accessories, Equipment for petroleum and natural gas industries, Protective equipment, Fasteners for aerospace construction, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Tyres.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Screw Micro Vials

GB/T 8336-1998 Special thread gauges for gas cylinders
GB/T 8336-2011 Special thread gauges for gas cylinders
GB 8335-1998 Special threads for gas cylinders
GB 8335-2011 Special threads for gas cylinders
GB 10878-1999 Speclal taps of taper threads for gas cylinders
GB/T 10878-2011 Special taps of taper threads for gas cylinders
GB/T 17449-1998 Packaging--Glass containers--Thread finish dimensions
GB/T 22055.2-2008 Microscopes-Screw threads for objectives and related nosepieces-Part 2:Screw thread type M25×0.75mm
GB/T 10922-1989 Gauges for pipe threads where pressure-tight joints are not made on the threads
GB/T 22055.1-2008 Microscopes-Screw threads for objectives and related nosepieces-Part 1:Screw thread type RMS(4/5in×1/36in)
GB/T 1581-1979 Gauges for tapered screw thread,metric series
GB/T 22522-2008 Three wires for screw thread measuing
GB/T 9253.9-1995 Drill pipe thread gauges
GB/T 22091.1-2008 Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 1: Verification of paralled internal and taper external threads
GB/T 10922-2006 Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads

Danish Standards Foundation, Screw Micro Vials

DS 729:1956 Gas cylinders. Tapered cylinder thread
DS 389:1967 Screw threads for bottles and glass jars
DS/ISO 1501:2009 ISO miniature screw threads
DS/EN ISO 15245-2:2002 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection
DS 729:2012 Transportable gas cylinders for acetylene - Tapered cylinder thread
DS/EN ISO 15245-1:2002 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification
DS/EN ISO 15245-1/A1:2013 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification
DS/ISO 15245-1:2021 Gas cylinders – Parallel threads for connection of valves to gas cylinders – Part 1: Specification
DS/EN ISO 15245-1:2021 Gas cylinders – Parallel threads for connection of valves to gas cylinders – Part 1: Specification (ISO 15245-1:2021)
DS/EN 15543/AC:2009 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
DS/EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
DS/EN ISO 11363-1/AC:2012 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications
DS/EN ISO 11363-1:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications
DS/EN ISO 11363-2:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges
DS/ISO 228/2:1985 Pipe threads where pressure-tight joints are not made on the threads. Part 2: Verification by means of limit gauges
DS/EN 144-1:1992 Respiratory protective devices. Gas cylinder valves. Thread connection for insert connector

Association Francaise de Normalisation, Screw Micro Vials

NF H35-088:1991 Bottling industry. Screw neck glass container finish. Flask thread height.
NF H35-131*NF EN 16292:2013 Glass packaging - Screw finishes - Depressed threads
NF H35-023:1973 BOTTLING-SCREW FINISHES FOR PRESSURE CAPSULES.
NF H35-036:1984 Bottling industry. Plastic screw finish. Parfumery type. Dimensions.
NF E29-685:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 26 - Taper 1/16 (3 degrees 34'), 14 TPI NPT. Gauge requirements.
NF E03-500*NF ISO 1501:2009 ISO miniature screw threads
NF ISO 1501:2009 Filetages miniatures ISO
NF EN ISO 15245-2:2002 Bouteilles à gaz - Filetages parallèles pour le raccordement des robinets sur les bouteilles à gaz - Partie 2 : contrôle par calibre
NF H35-092:1991 Bottling industry. Wide-mouth glass containers (thead finish).
NF H35-068:1991 Bottling industry. Glass bottles. Press-screw neck glass finish, 31.
NF H35-066:1990 Bottling industry. Plastic screw finishes, diameter 28 and 31 - 1 thread for sparkling drinks. Dimensions.
NF H35-065:1990 Bottling industrie. Plastic screw finish for flat products.
NF E29-684:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 26, taper 1/16 (3 degrees 34' ), 14 tpi npt.
NF H35-114*NF EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids.
NF B35-796-1:2000 Laboratory glassware - Bottles - Part 1 : screw-neck bottles.
NF B35-796-1*NF EN ISO 4796-1:2016 Laboratory glassware - Bottles - Part 1 : screw-neck bottles
NF E29-686-2*NF EN ISO 15245-2:2002 Gas cylinders - Parallel threads for correction of valves to gas cylinders - Part 2 : Gauge inspection.
NF E03-501:1970 ISO miniature screw threads.profile.
NF E03-502:1970 ISO miniature screw threads.general plan.
NF H35-048:1980 Bottling industry. Screw collar, "parfumery" type.
NF H35-067:1990 Bottling industry. Plastic screw finish, 1 thread, diameter 28 for sparkling drinks with outlet gaps. Dimensions.
NF E29-674-2:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2 : inspection gauges.
NF H35-103:1993 Bottling industry. Glass bottles. Glass screw finishes for non carbonated products so-called "bvp". Dimensions.
NF E29-676:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 28.3 mm, taper 3/25, 14 TPI, whitworth form.
NF E03-500/A1*NF ISO 1501/A1:2020 ISO miniature screw threads - Amendment 1 : the figure for the tolerance zone of external thread
NF ISO 1501/A1:2020 Filetages miniatures ISO - AMENDEMENT 1 : la figure pour la zone de tolérance du filetage extérieur
NF E29-679:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 16.4 - Taper 3/20, 14 TPI SI. Gauge requirements.
NF E03-503:1970 ISO miniature screw threads.tolerances.general plan.
NF E03-152:1981 Thread checking with limit gauges. Threaded gauges for screw.
NF E29-686-1*NF EN ISO 15245-1:2021 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1 : specification
NF E29-683:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 34 - Taper 8.736 per cent (5 degrees C), Pitch 2 SI. Gauge erquirements.
NF E29-674-2:1996 Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Part 2 : gauge inspection.
NF E03-620:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for internal threads.
NF E29-681:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 25,8 - Taper 3/26 (6 degrees C 38'), 14 TPI SI. Gauge requirements.
NF E03-619:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for external threads.
NF E29-677:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter : 28,3 - Taper 3/25, 14 TPI SI. Gauge requirements.
NF E29-686-1:2002 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification.
NF E29-674-1:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1 : specifications.
NF E29-678:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 16,4, taper 3/20, 14 TPI si.
NF EN ISO 15245-1:2021 Bouteilles à gaz - Filetages parallèles pour le raccordement des robinets sur les bouteilles à gaz - Partie 1 : spécification
NF E03-164:1986 Pipe threads. Checking of parallel pipe threads with limit gauges. Plain gauges for external and internal screw threads.
NF E29-682:2015 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 34 - taper 8,732 % (5o) - Pitch 2 SI
NF E29-682:1980 Gas cylinders. Taper screw thread for valve stem and culinder neck assembly. Nominal diameter 34 taper 8 732 per cent (5 degrees), pitch 2 si.
NF E29-680:2015 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 25,8, taper 3/26 (6o 38'), 14 Tpi SI
NF E29-680:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 25,8, taper 3/26 (6 degrees 38', 14 tpi si.
NF E03-153:1975 Checking of threads with limit gauges-threaded gauges for nuts.
NF E29-684:2012 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 26, Taper 1/16 (3 o 34'), 14 Tpi NPT.
NF E29-684:2015 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 26, Taper 1/16 (3o 34'), 14 Tpi NPT
NF E03-504:1970 ISO miniature screw threads.tolerances.tables for limits of sizes.
NF E29-686-1/A1:2013 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: specification - Amendment 1
NF H35-127-2*NF EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: one way glass MCA 2 finish
NF E29-674-1*NF EN ISO 11363-1:2018 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1 : specifications
NF EN ISO 11363-1:2018 Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1 : spécifications
NF H35-127-1*NF EN 16291-1:2013 Glass packaging - Screw finishes for pressure capsules - Part 1 : returnable glass MCA 2 finish
NF E29-674-1:1996 Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Part 1 : specification.
NF E29-674-2*NF EN ISO 11363-2:2017 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2 : inspection gauges
NF EN ISO 11363-2:2017 Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 2 : calibres de contrôle
NF E03-151:1998 ISO general purpose screw threads. Checking of screw threads with gauges. General.
NF E03-154:1970 Thread checking with limit gauges. Plain gauges for screws and nuts.
NF EN ISO 11363-1/A1:2023 Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1 : spécifications - Amendement 1
NF E03-004-3*NF EN 10226-3:2005 Pipe threads where pressure tight joints are made on the threads - Part 3 : verification by means of limit gauges
NF S76-024-1:2000 Respiratory protective devices - Gas cylinder valves - Part 1: thread connections for insert connector

Korean Agency for Technology and Standards (KATS), Screw Micro Vials

KS B ISO 11191:2003 Gas cylinders-25E taper thread for connection of valves to gas cylinders-Specification
KS B ISO 11191:2013 Gas cylinders－25E taper thread for connection of valves to gas cylinders－Specification
KS B ISO 11116-2:2012
KS B ISO 11116-2:2014 Gas cylinders－17E taper thread for connection of valves to gas cylinders－Part 2：Inspection gauges
KS B 0228-2013 Miniature Screw Threads
KS B 0228-1978(2011) Miniature Screw Threads
KS B ISO 10920:2005 Gas cylinders-25E taper thread for connection of valves to gas cylinders-Specification
KS B ISO 10920:2015 Gas cylinders－25E taper thread for connection of valves to gas cylinders－Specification
KS B ISO 15245-2:2005 Gas cylinders-Parallel threads for connection of valve to gas cylinders-Part 2:Gauge inspection
KS B ISO 15245-2:2015 Gas cylinders－Parallel threads for connection of valve to gas cylinders－Part 2：Gauge inspection
KS B ISO 15245-2-2015(2020) Gas cylinders－Parallel threads for connection of valve to gas cylinders－Part 2：Gauge inspection
KS L ISO 4796-1:2012 Laboratory glassware－Bottles－Part 1：Screw-neck bottles
KS B ISO 10920-2005(2010) Gas cylinders－25E taper thread for connection of valves to gas cylinders－Specification
KS B ISO 11191-2003(2008) Gas cylinders－25E taper thread for connection of valves to gas cylinders－Specification
KS B ISO 15245-1:2015 Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification
KS B ISO 15245-1-2015(2020) Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification
KS B ISO 15245-1:2005 Gas cylinders-Parallel threads for connection of valves to gas cylinders-Part 1:Specification
KS B ISO 11116-1:2012 Gas cylinders－17E taper thread for connection of valves to gas cylinders－Part 1：Specification
KS B ISO 11116-1:2014 Gas cylinders－17E taper thread for connection of valves to gas cylinders－Part 1：Specification
KS B 5223-2001(2016) Screw thread limit gauges for parallel pipe threads
KS B 5223-1985 Screw thread limit gauges for parallel pipe threads
KS B 5223-2001(2021) Screw thread limit gauges for parallel pipe threads
KS B ISO 11363-1:2016 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part1: Specification
KS B ISO 11363-1-2016(2021) Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part1: Specification
KS B ISO 12209-2-2005(2010) Gas cylinders－Outlet connections for gas cylinder valves for compressed breathable air－Part 2：Threaded connections
KS B 5231-2009(2019) Gauges for taper pipe threads
KS B ISO 11363-2:2019 Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 2: Inspection gauges
KS B 0264-1977(2010) Three wires for screw thread measuring
KS B 5223-2001 Screw thread limit gauges for parallel pipe threads
KS B ISO 12209-2:2005 Gas cylinders-Outlet connections for gas cylinder valves for compressed breathable air-Part 2:Threaded connections
KS B ISO 12209-2:2015 Gas cylinders－Outlet connections for gas cylinder valves for compressed breathable air－Part 2：Threaded connections
KS B ISO 228-2:2007 Pipe threads where pressure-tight joints are not made on the threads-Part 2:Verification by means of limit gauges
KS B ISO 228-2:2013 Pipe threads where pressure－tight joints are not made on the threads－Part 2：Verification by means of limit gauges
KS B 0220-1979(2022) Gauge Blanks for Screw Thread Limit Gauges
KS B 0220-1982 Gauge Blanks for Screw Thread Limit Gauges
KS W ISO 10959:2005 Aerospace-MJ threads-Gauging
KS W ISO 10959-2005(2015) Aerospace－MJ threads－Gauging
KS B 5228-2001(2017) Limit gauges for unified coarse screw thread
KS W ISO 10959:2016 Aerospace－MJ threads－Gauging
KS B ISO 8038-2-2006(2016) Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces —Part 2: Screw thread type M25 × 0.75 mm
KS B ISO 8038-2-2006(2021) Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces —Part 2: Screw thread type M25 × 0.75 mm

International Organization for Standardization (ISO), Screw Micro Vials

ISO 11191:1997 Gas cylinders - 25E taper thread for connection of valves to gas cylinders - Inspection gauges
ISO 11116-2:1999 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges
ISO/R 1501:1970 ISO miniature screw threads
ISO 1501:2009 ISO miniature screw threads
ISO 15245-2:2001 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection
ISO 11116:1999 Gas cylinders — 17E taper thread for connection of valves to gas cylinders — Part 2: Inspection gauges
ISO 4796-1:2000 Laboratory glassware - Bottles - Part 1: Screw-neck bottles
ISO 11116-1:1999 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 1: Specification
ISO 11363-2:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges
ISO 15245-1:2001 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification
ISO 15245-1:2021 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification
ISO 11363-1:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications
ISO 8038:2013 Microscopes.Screw threads for objectives and related nosepieces
ISO 11363-1:2018 Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications
ISO 15245-1:2001/Amd 1:2013 Gas cylinders.Parallel threads for connection of valves to gas cylinders.Part 1: Specification; Amendment 1
ISO 8038:2011 Microscopes — Screw threads for objectives and related nosepieces
ISO 11363-1:2018/Amd 1:2023 Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications — Amendment 1
ISO 8038:1985 Optics and optical instruments; Microscopes; Screw thread for objectives
ISO 11363-2:2017 Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 2: Inspection gauges
ISO/TR 11364:2019 Gas cylinders — Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system
ISO 8038-2:2001 Optics and optical instruments - Screw threads for microscope objectives and related nosepieces - Part 2: Screw thread type M25 x 0,75 mm
ISO 16239:2013 Metric series wires for measuring screw threads
ISO 12209-2:2000 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections
ISO 15872:2002 Aerospace - UNJ threads - Gauging
ISO 10959:2000 Aerospace - MJ threads - Gauging
ISO 10959:2016 Aerospace - MJ threads - Gauging
ISO 15872:2017 Aerospace - UNJ threads - Gauging
ISO 228-2:1980 Pipe threads where pressure-tight joints are not made on the threads — Part 2: Verification by means of limit gauges
ISO 7-2:2000 Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauges
ISO 228-2:1987 Pipe threads where pressure-tight joints are not made on the threads; Part 2 : Verification by means of limit gauges

SE-SIS, Screw Micro Vials

SIS SS 2235-1989 Gas cylinders — Valve stem and cylinder neck threads for gas cylinders
SIS 84 50 11-1970 Glass necks for screw thread closures
SIS 84 50 02-1970 GL screw threads for plastic closures for glass containers
SIS SS 2602-1992 Gas cylinders — Valve stem and cylinder neck parallel threads for breathing air — Max filling pressure 300 bar
SIS SMS 272-1929
SIS SS 2239-1988 Gas cylinders — Valve stem and cylinder neck threads for liquefied petroleum gas — Type 5, 6 and 7 — Dimensions
SIS SMS 2171-1966 Metric screw threads. Tolerances. Limits of sizes for medium quality commercial bolt and nut threads
SIS SS-EN 144-1-1991 Respiratory protective devices — Gas cylinder valves — Thread connection for insert connector
SIS SMS 2398-1972 ISO general purpose metric screw threads. Cauging
SIS SMS 327-1959

German Institute for Standardization, Screw Micro Vials

DIN 477-7:1984 Gas cylinder valves; taper threads; gauges
DIN EN 16292:2013 Glass packaging - Screw finishes - Depressed threads; German version EN 16292:2013
DIN EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids; German version EN 15543:2008
DIN EN ISO 4796-1:2001 Laboratory glassware - Bottles - Part 1: Screw neck bottles (ISO 4796-1:2000); German version EN ISO 4796-1:2000
DIN 6094-13:1997 Means of packaging - Finishes - Part 13: 2 thread- and 3 thread-screw-finishes
DIN 6094-8:1997 Means of packaging - Finishes - Part 8: With external screw thread
DIN EN 15543:2009-09 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids; German version EN 15543:2008 + AC:2008
DIN 405-3:1997 General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
DIN 40431-2:1972-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 40431-1:1970-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
DIN 5606-2:1975-03 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
DIN EN ISO 11363-1:2012 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2010 + Cor. 2:2012); German version EN ISO 11363-1:2010 + AC:2012
DIN 2279:2001-12 Geometrical Product Specifications (GPS) - Gauges for ISO metric screw threads - Gauging of the internal and external threads; Survey, inscription, marking, application
DIN 40431-2:1972 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 12664-2:1981 Laboratory glassware; one-mark volumetric flasks, flasks with glass round thread
DIN EN ISO 15245-1:2021-09 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2021); German version EN ISO 15245-1:2021
DIN 103-9:1985 ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
DIN 40431-1:1970 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
DIN 5606-2:1975 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
DIN 477-7:2014 Gas cylinder valves for cylinder test pressures up to 300 bar - Part 7: Gauges for tapered thread W 31,3 × 1/14 (acetylene)
DIN EN ISO 11363-1:2018-05 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018); German version EN ISO 11363-1:2018 / Note: To be amended by DIN EN ISO 11363-1/A1 (2023-02).
DIN EN ISO 15245-2:2002-04 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001
DIN 8140-3:1993 Wire thread inserts for ISO metric screw threads; gauges and gauge sizes
DIN 30295-2:1973-05 Rounded Trapezoidal Threads; Limiting Screw Thread Dimensions and Allowances; Permissible Deviations and Permissible Wear of Thread Gauges
DIN EN 16289:2013 Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish; German version EN 16289:2013
DIN EN ISO 15245-2:2002 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001
DIN 263-3:2003 Single- and double-start acme thread with clearance for rail vehicles - Part 3: Thread gauges; Thread dimensions and permissible wear of thread gauge
DIN EN ISO 11363-2:2018-03 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017); German version EN ISO 11363-2:2017
DIN 103-9:1985-02 ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
DIN EN ISO 15245-1:2020 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO/DIS 15245-1:2020); German and English version prEN ISO 15245-1:2020
DIN 40401-1:1981 Gauges for edinson thread for d-type fuses "go" ring gauges
DIN EN ISO 11363-2:2018 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017); German version EN ISO 11363-2:2017
DIN EN ISO 11363-2:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2010); German version EN ISO 11363-2:2010
DIN 8140-3:2017 Wire thread inserts for ISO metric screw threads - Part 3: Gauges and gauge sizes
DIN 262-2:1973-05 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
DIN 264-2:1973-05 Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
DIN EN ISO 11363-1/A1:2023-02 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/DAM 1:2023); German and English version EN ISO 11363-1:2018/prA1:2023 / Note: Date of issue 2023-01-20*Intended...
DIN 262-2:1973 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
DIN 405-3:1997-11 General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
DIN EN ISO 4796-1:2016 Laboratory glassware - Bottles - Part 1: Screw-neck bottles (ISO 4796-1:2016); German version EN ISO 4796-1:2016
DIN EN 10226-3 Berichtigung 1:2006 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005, Corrigenda to DIN EN 10226-3:2005-05
DIN EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003

European Committee for Standardization (CEN), Screw Micro Vials

EN 16292:2013 Glass packaging - Screw finishes - Depressed threads
EN ISO 11116-2:1999 Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 2: Inspection Gauges
EN ISO 11363-2:2017 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges
EN 629-2:1996 Transportable Gas Cylinders - 25E Taper Thread for Connection of Valves to Gas Cylinders - Part 2: Gauge Inspection
prEN 629-1992 Gas cylinders; specifications for 25.8 mm taper thread for connection of valves to gas cylinders
prEN 628-1992 Gas cylinders; requirements for gauge inspection of tapered threads for connection of valves to gas cylinders of 25.8 mm nominal diameter
EN ISO 11363-1:2018 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
EN ISO 15245-1:2021 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2021)
EN ISO 4796-1:2000 Laboratory Glassware - Bottles - Part 1: Screw-Neck Bottles ISO 4796-1: 2000
EN ISO 11363-2:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2010)
EN ISO 4796-1:2016 Laboratory glassware - Bottles - Part 1: Screw-neck bottles
EN 629-1:1996 Transportable Gas Cylinders - 25E Taper Thread for Connection of Valves to Gas Cylinders - Part 1: Specification
EN ISO 15245-1:2001 Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: specification ISO 15245-1: 2001
EN 15543:2008/AC:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
EN ISO 15245-1:2001/A1:2013 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001/Amd 1:2013)
EN ISO 11116-1:1999 Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 1: Specifications ISO 11116-1:1999
EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish (Incorporating corrigendum August 2014)
EN 16289:2013 Glass packaging - Screw finishes for pressure capsules - MCA 7@5 RF finish
EN ISO 11363-1:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (Incorporating corrigenda April 2011 and January 2012)
EN 16291-1:2013 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish
EN 144-1:2018 Respiratory protective devices - Gas cylinder valves - Part 1: Inlet connections

CZ-CSN, Screw Micro Vials

CSN 13 8246-1983 Caps with internal threads
CSN 01 4031-1981 Threads for side connections of gas cylinders closing valves
CSN 01 4042-1981 Taper thread for valves and pressure gas cylinders
CSN 25 4015 Za-1987
CSN 25 4103-1964 Gauge thread profile
CSN 25 4267-1961 Screw gauges. Measuring parts of reference gauges for ring thread "not go" gauges. Cycle thread
CSN 25 4261-1961 Screw gauges. Reference gauges for new ring thread "go" gauges. Cycle thread
CSN 25 3876-1959
CSN 25 4108-1969 Screw thread measuring with measuring wires
CSN 25 4100-1964 Survey of limit thread gauges for metric, pipe cylindrical and Whitworth threads
CSN 25 4263-1961 Screw gauges. Reference gauges on wearing for ring thread "go" gauges. Cycle thread
CSN 25 4264-1961 Screw gauges. Measuring parts of reference gauges on wearing for ring thread "go" gauges. Cycle thread
CSN 25 4266-1961 Screw gauges. Reference gauges for ring thread "not go" gauges. Cycle thread
CSN 25 4252-1961 Screw gauges. Measuring parts for "go" limit of cylindrical thread gauges. Cycle thread
CSN 25 4300-1961 Screw gauges. Survey of limit thread gauges. V-thread and edison screw
CSN ISO 228-2:1993 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Vertification by means of limit gauges
CSN 25 1469-1986 Micrometers for screw threads with interchangeable anvils. Technical requirements
CSN 25 1470-1986 Micrometers for screw threads with interchangeable anvils. Fundamental dimensions
CSN 02 1033-1987 Run-outs of external metric thread
CSN 25 4017-1994 Gauges for trapezoidal thread. Deviations
CSN 25 4346-1961 Screw gauges. Reference gauges for new thread rings with "go" side. V-thread (angle between the flanks=80 grads)
CSN EN 144-1-1994 Respiratory protective devices-Gas cylinder valves-Thread connection for insert connector

CH-SNV, Screw Micro Vials

SNV 95854-1950
SN 210 318-1982 Technical drawings — Protective marks
SN 429 001-1984 Electrostatic charging — Classification and equipment of rooms
SN EN ISO 15245-1:2021 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2021)
SN ISO 4029:1978 Hexagon socket set screws with cup point

Taiwan Provincial Standard of the People's Republic of China, Screw Micro Vials

CNS 4551-1978 Gas Cylinders Thread for Nozzles, Neck Rings and Protection Caps
CNS 10849-1984 Screw Threads of Valves for High Pressure Gas Cylider
CNS 12752-1990 Screw Thread Limit Gauges for Parallel Pipe Threads
CNS 12753-1990 Gauges for Taper Pipe Threads
CNS 4553-1978 Rounded Trapezoidal Thread Limits of Sizes and Deviations Tolerances and Permissible Weal of Thread Gauges
CNS 4372-1978 Round Thread with Clearance and Steep Flank with Pitch 7mm (Limits of Sizes and Deviations--Tolerances and Permissible Wear of Thread Gauges)
CNS 533-1991 Limit Gages for Metric Coarse Screw Threads
CNS 534-1991 Limit Gages for Metric Fine Screw Threads

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Screw Micro Vials

GB/T 8335-2011 Special threads for gas cylinders

Professional Standard - Aviation, Screw Micro Vials

HB 4007-1987 Taper thread pith diameter screw thread ring gauge exclusively used for gas cylinders
HB 4006-1987 Taper thread pith diameter screw thread plug gauge exclusively used for gas cylinders
HB 4010-1987 Technical conditions for taper thread gauge exclusively used for gas cylinders for aviation
HB 6135-1987 Taper thread for aviation cylinders
HB 4009-1987 Reference plug gauge of taper thread pitch diameter screw thread ring gauge exclusively used for gas cylinders
HB 4005-1987 Plain ring gauge exclusively used for gas cylinders before cutting out taper thread
HB 4004-1987 Plain plug gauge exclusively used for gas cylinders before cutting out taper thread
HB 7443-1996 Theoretical weight of MJ threaded bolts
HB 4273-2004 Technical specification for internal screw gauge for wire thread insert and standard tapping ring
HB 4008-1987 Reference plug gauge of plain ring gauge exclusively used for gas cylinders before cutting out taper thread
HB 4273-1989 Specifications for thread gauges and standard screw hole rings for internal threads for wire thread inserts
HB 4235-1989 Technical conditions for ＭＪthread gauge

HU-MSZT, Screw Micro Vials

British Standards Institution (BSI), Screw Micro Vials

BS EN ISO 15245-2:2001 Gas cylinders. Parallel threads for connection of valves to gas cylinders. Gauge inspection
BS EN ISO 4796-1:2001 Laboratory glassware. Bottles. Screw-neck bottles
BS ISO 1501:2009 ISO miniature screw threads
BS ISO 1501:2009+A1:2020 ISO miniature screw threads
BS EN ISO 11363-2:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Inspection gauges
BS EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
BS EN ISO 4796-1:2016 Tracked Changes. Laboratory glassware. Bottles. Screw-neck bottles
BS EN ISO 11363-1:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Specifications
BS EN ISO 15245-1:2001+A1:2013 Gas cylinders. Parallel threads for connection of valves to gas cylinders. Specification
19/30397488 DC BS ISO 1501 AMD1. ISO miniature screw threads
BS EN ISO 11363-1:2018+A1:2023 Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders - Specifications
BS EN 629-1:1996 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Specification
BS 919-2:1971 Specification for screw gauge limits and tolerances - Gauges for screw threads of Whitworth and BA forms
BS ISO 8038:2013 Microscopes. Screw threads for objectives and related nosepieces
BS EN ISO 15245-1:2021 Tracked Changes. Gas cylinders. Parallel threads for connection of valves to gas cylinders. Specification
BS EN ISO 11363-1:2018 Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Specifications
BS 3777:1964 Specification for screw thread measuring cylinders
BS EN ISO 11363-2:2017 Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Inspection gauges
BS 341-1:2022 Tracked Changes. Gas cylinders. Cylinder valves. Threads for connection of valves to gas cylinders. Specification
PD ISO/TR 11364:2019 Tracked Changes. Gas cylinders. Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system
BS 919-1:1960 Specification for screw gauge limits and tolerances - Gauges for screw threads of Unified form
BS 919-3:1968 Specification for screw gauge limits and tolerances - Gauges for ISO metric screw threads
21/30437019 DC BS 341-1. Gas cylinders. Cylinder valves. Part 1. Threads for connection of valves to gas cylinders. Specification
20/30414262 DC BS EN ISO 15245-1. Gas cylinders. Parallel threads for connection of valves to gas cylinders. Part 1. Specification
BS 919-1:2007 Screw gauge limits and tolerances – Part 1: Specification for gauges for screw threads of unified form
BS EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Verification by means of limit gauges
BS 7795:1995 Specification for bolts, screws and studs with a pre-applied micro-encapsulated chemical adhesive feature incorporated into the thread
BS ISO 965-2:1998+A1:2021 ISO general purpose metric screw threads. Tolerances - Limits of sizes for general purpose external and internal screw threads. Medium quality
BS EN 144-1:2000 Respiratory protective devices - Gas cylinder valves - Thread connections for insert connector
BS ISO 10959:2000 Aerospace - MJ threads - Gauging
BS ISO 15872:2002 Aerospace - UNJ threads - Gauging

Japanese Industrial Standards Committee (JISC), Screw Micro Vials

JIS B 0201:1973 Miniature screw threads
JIS B 0201:2017 Miniature screw threads
JIS B 7141:1994 Microscope -- Screw thread for objectives
JIS B 7141:2003 Microscope -- Screw thread for objectives
JIS B 7141:2012 Microscopes.Screw threads for objectives and related nosepieces
JIS B 0271:2018 Wires for measuring screw threads
JIS B 0271:2004 Three wires for screw thread measuring and four wires for screw thread measuring
JIS B 0271:1992 Three wires for screw thread measuring
JIS B 0253:1985 Gauges for taper pipe threads
JIS B 0254:1985 Screw thread limit gauges for parallel pipe threads
JIS B 0261:2020 Parallel screw threads gauges -- Measuring method
JIS B 0262:2022 Gauges for taper pipe threads -- Measuring method
JIS B 0251:1998 Limit gauges for metric screw threads
JIS B 0255:1998 Limit gauges for unified screw threads
JIS B 0251:2008 Limit gauges for metric screw threads
JIS B 0261:1992 Measuring method for parallel screw gauges
JIS B 0254:2011 Limit Gauges for Parallel Pipe Threads
JIS B 3102:2001 Gauge blanks for screw threads limit gauges
JIS B 0261:2004 Parallel screw thread gauges -- Measuring method of gauges

PL-PKN, Screw Micro Vials

PN M69226-1963 Gas cylindres. Me?ric conical thread
PN M53214-1973 Ex?ernal micromelers for screw ?hreads
PN M69225-1960 Gas cylinders. Whitwor?h ?hread o? 80 mm diameter
PN C94210-07-1988 Rubber nipples Nipples for threaded bottles to feed infants
PN M53215-1973 Adjustable gages for ex?ernal micrometers for screw ?hreads
PN M69224-1960 Gas cylindres. Whitworth threads of 21,8 and 24,3 mm diameters
PN M53028-1974 Measuring instruments Metiic screw gauges
PN G53039-1966 Core drilling Gauges for tool threads
PN M02130-1970 Metric screw threads Tolerances for gauges
PN M53395-1988 Mcusurint: instruments Sc rew pitcli tiauges lor metrie thrcads
PN M02133-1989 Buttress screw threads 45° Tolerances for gauges

RU-GOST R, Screw Micro Vials

GOST 24998-1981 Gauges for tapes thread of valves and gas-bags. Tolerances
GOST 3469-1991 Mikroscopes. Screw threads for objectives. Dimensions
GOST 9909-1981 Bacis norms of interchangeability. Taper screw thread of valves and gas cylinder
GOST 24997-2004 Gauges for metric thread. Tolerances
GOST 2533-1988 Gauges for staight pipe thread. Tolerances
GOST 28094-1989 Gauges for tool cir cled tread. Tolerances
GOST 24997-1981 Gauges for metric threads. Tolerances

CEN - European Committee for Standardization, Screw Micro Vials

EN ISO 15245-2:2001 Gas Cylinders - Parallel Threads for Connection of Valves to Gas Cylinders - Part 2: Gauge Inspection
EN 144-1:1991 Respiratory Protective Devices - Gas Cylinder Valves - Thread Connection for Insert Connector

Standard Association of Australia （SAA）, Screw Micro Vials

AS 4186:1994 Screwcap bottles for microbiological use (McCartney bottles)
AS 2473:1990 Valves for compressed gas cylinders (threaded outlet)
AS 2473.2:2007 Valves for compressed gas cylinders - Outlet connections (threaded) and stem (inlet) threads
AS 2473.2:2015 Valves for compressed gas cylinders, Part 2: Outlet connections (threaded) and stem (inlet) threads
AS 1014:1986 Gauging of metric screw threads
AS 1098:1972 Roller-type screw calliper gauges

U.S. Military Regulations and Norms, Screw Micro Vials

ARMY MS51830 REV E (1)-1993 INSERT, SCREW-THREAD, LOCKED IN, KEY LOCKED, MINIATURE AND LIGHTWEIGHT
ARMY MS51830 REV E-1992 INSERT, SCREW-THREAD, LOCKED IN, KEY LOCKED, MINIATURE AND LIGHTWEIGHT

American Society for Testing and Materials (ASTM), Screw Micro Vials

ASTM E210-63(2005) Standard Specification for Microscope Objective Thread
ASTM E210-63(1999)e1 Standard Specification for Microscope Objective Thread
ASTM E210-63(2010) Standard Specification for Microscope Objective Thread
ASTM E237-02(2012) Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)

American Society of Mechanical Engineers (ASME), Screw Micro Vials

ASME B1.10M-2004(R2019) Unified Miniature Screw Threads
ASME B1.11-1958 Microscope Objective Thread Errata - July 1972
ASME B1.11-1958(R2016) Microscope Objective Thread Errata - July 1972
ASME B89.1.17-2002(R2017) Measurement of Thread Measuring Wires
ASME B89.1.17-2001 Measurement of Thread Measuring Wires
ASME B89.1.17 ERTA-2006 Measurement of Thread Measuring Wires
ASME B89.1.17-2001(R2017) Measurement of Thread Measuring Wires
ASME B1.16M-1984 Gages and Gaging for Metric M Screw Threads Revision of ANSI B1.16-1972
ASME B1.16M-1984(R2016) Gages and Gaging for Metric M Screw Threads

American National Standards Institute （ANSI), Screw Micro Vials

ANSI/ASME B1.10M-2004 Unified Miniature Screw Threads
ANSI B1.11-1958 Microscope Objective Thread
ANSI/ASME B1.11-1958 Microscope Objective Thread
ANSI/ASME B89.1.17-2001 Measurement of Thread Measuring Wires
ANSI/ASME B1.2-1983 Gages and Gaging for Unified Screw Threads

RO-ASRO, Screw Micro Vials

STAS 6852-1989 MICROSCOPES Threaded connection for objectives
STAS 10182-1982 Glass bottles for threaded cap clousure BOTTLE MOUTH Shape and dimensions
STAS 5327-1978 SCREW THREAD FOR GLASS BOTTLES FOR BLOOD AND PLASMA
STAS 5020-1991 Theraded taper gauges for casing pipe threads checking up
STAS 2980/2-1985 ISO metric screw tlireads GAUGES AND MATING GAUCES FOR PARALLEL TNREADC lassification and svmbolization
STAS 5292-1980 Equipment for investiga?ions THREADED TAPE GAUGES FOR THE INSPECTION OF TOOL JOINT THREAD FOR DRILL-PIPE 0 50= mm
STAS 8417/1-1974 GAUGING OF CYLINDRICAL THREADED PARTS
STAS 4136/1-1980 SCREW PLUG GAUGES AND REFEREKCE GAUGES FOR METRIC SCREW THREADS FROM 1 TO 30 mm DIAMETERS Dimensions
STAS 4136/2-1980 SCREW PLUG GAUGES AND REFERENCE GAUGES FOR METRIC SCREW THREADS FROM 32 TO 100 mm DIAMETERS Dimensions

Professional Standard - Machinery, Screw Micro Vials

JB/T 7398.3-1994 Microscope Objective Thread
JB/T 10031-1999 Gauges for pipe threads where pressure-tight joints are made on the threads
JB/T 10865-2008 Limit gauges for unified screw threads
JB/T 1128-1999 Clearance screw thread gauge
JB/T 10588-2006 Gauges for metric tape screw thread

FI-SFS, Screw Micro Vials

SFS 2089-1966
SFS 2088-1966
SFS B.1.51-1961 Metrinen ISO-kierre Yleiskatsaus

ZA-SANS, Screw Micro Vials

SANS 1700-2-8:2009 Fasteners Part 2: Screw threads Section 8: ISO miniature screw threads
SANS 1700-2-8:1996 Fasteners Part 2: Screw threads Section 8: ISO miniature screw threads

IT-UNI, Screw Micro Vials

UNI EN ISO 15245-1:2021 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification

KR-KS, Screw Micro Vials

KS B ISO 11116-1-2012 Gas cylinders－17E taper thread for connection of valves to gas cylinders－Part 1：Specification
KS B ISO 11116-2-2012 Gas cylinders－17E taper thread for connection of valves to gas cylinders－Part 2：Inspection gauges
KS B ISO 11363-1-2016 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part1: Specification
KS B ISO 11363-2-2019 Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 2: Inspection gauges
KS B ISO 8038-2-2023 Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces — Part 2: Screw thread type M25 × 0.75 mm

Lithuanian Standards Office , Screw Micro Vials

LST EN ISO 15245-2:2002 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001)
LST EN 15543-2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
LST EN 15543-2008/AC-2009 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
LST EN ISO 15245-1:2002 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001)
LST EN ISO 12209-2:2002 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000)
LST EN ISO 15245-1:2021 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2021)
LST EN ISO 11363-1:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2010)

AENOR, Screw Micro Vials

UNE-EN ISO 15245-2:2002 Gas cylinders - Parallel threads for connection of valves to gas cylinders- Part 2: Gauge inspection. (ISO 15245-2:2001)
UNE-EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
UNE 17710:1978 ISO METRIC SCREW THREADS. GAUGING.
UNE-EN ISO 15245-1:2002 Gas cylinders- Parallel threads for connection of valves to gas cylinders - Part 1: Specification. (ISO 15245-1:2001)
UNE 17708:2002 ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality.
UNE-EN ISO 11363-1:2010 Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Part 1: Specifications (ISO 11363-1:2010)
UNE-EN ISO 15245-1:2002/A1:2013 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001/Amd 1:2013)
UNE 101365:1986 FLUID POWER SYSTEMS AND COMPONENTS. CYLINDERS. PISTON ROD THREAD DIMENSIONS AND TYPES

AT-ON, Screw Micro Vials

ONORM M 1490-1986 Screw threads; survey
ONORM ISO 228 Teil.2:1984 Pipe threads where pressure-tight joints are not made on the threads; Verification by means of limit gauges
ONORM ISO 965 Teil.2:1983 ISO general purpose metnc screw threads; Tolerances; Limits ofsizes for general purpose external and internal threads; Medium quality
ONORM M 7390 Teil.5-1987 Gas cylinder valves with cylindrical valve stemsfor breathing apparatus; types, sizes, connections, threads
ONORM EN 144-1-1992 Respiratory protective devices - Gas cylinder valves - Thread connection for insert connector

YU-JUS, Screw Micro Vials

JUS M.B0.510-1981 Metric screw thread with trianguiar ISO—profile. Gauges for extemal threads. Tolerances for thread gauges
JUS M.B0.511-1981 Metne screw thread with tnangular li>U-protile. bauges tor internat tnreaas. loierances ror znreaa gauges
JUS M.B0.514-1981 ISO Metric trapezoidal screw threads. Gauges for external and internat screw threads. Tolerances far thread gauges

未注明发布机构, Screw Micro Vials

BS EN ISO 11116-1:1999(2000) Gas cylinders — 17E taper thread for connection of valves to gas cylinders — Part 1 : Specifications
BS EN 15543:2008(2010) Glass packaging — Finishes for bottles — Screw thread finishes for bottles for non - carbonated liquids
BS EN ISO 15245-2:2001(2002) Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 2 : Gauge inspection
DIN EN ISO 15245-1:2003 Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification
BS 3777:1964(1999) Specification for Screw thread measuring cylinders
BS EN 629-2:1996 Transportable gas cylinders -25E taper thread for connection of valves to gas cylinders Part 2. Gauge inspection
BS 919-3:2007(2009) Screw gauge limits and tolerances – Part 3 : Specification for gauges for screw threads of ISO metric form
BS 919-1:2007(2009) Screw gauge limits and tolerances – Part 1 : Specification for gauges for screw threads of unified form

(U.S.) Ford Automotive Standards, Screw Micro Vials

FORD WSS-M11P45-A1-1989 ADHESIVE, THREAD LOCKING - MICRO ENCAPSULATED
FORD WX200-2013 PERFORMANCE REQUIREMENTS OF ISO METRIC THREADED FASTENERS WITH DRY FILM MICROENCAPSULATED ADHESIVE COMPOUND APPLED TO THE THREADS
FORD WX200-2014 PERFORMANCE REQUIREMENTS OF ISO METRIC THREADED FASTENERS WITH DRY FILM MICROENCAPSULATED ADHESIVE COMPOUND APPLED TO THE THREADS
FORD WX200-2006 PERFORMANCE REQUIREMENTS OF ISO METRIC MALE THREADED FASTENERS WITH DRY FILM MICROENCAPSULATED ADHESIVE COMPOUND APPLIED TO THE THREADS

Professional Standard - Aerospace, Screw Micro Vials

QJ 1319.1-1987 Ordinary thread gauge thread ring gauge (d=1~100mm)
QJ 164-1974 Thread profile dimensions and tolerances of thread gauges before plating
QJ 1318.1-1987 Ordinary thread gauge Integral thread plug gauge (d=1~6mm)
QJ 1319.2-1987 Ordinary thread gauge double handle thread ring gauge (d=105~150mm)
QJ 160-1974 Ordinary thread gauge thread profile dimensions and tolerances
QJ 161-1974 Thread gauge specification
QJ 2761-1995 MJ Thread Gauge Application Dimensions
QJ 2762-1995 MJ Thread Gauge Specifications
QJ 1318.2-1987 Ordinary thread gauge double-ended taper locking thread plug gauge (d=7~48mm)
QJ 1318.3-1987 Ordinary thread gauge double-ended steel ball fixed thread plug gauge (d=42~60mm)
QJ 1318.4-1987 Ordinary thread gauge single-head steel ball fixed thread plug gauge (d=64~100mm)
QJ 1318.5-1987 Ordinary thread gauge single head double handle fixed thread plug gauge (d=105~150mm)

ES-UNE, Screw Micro Vials

UNE-EN 15543:2008 ERRATUM:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
UNE-EN ISO 15245-1:2022 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2021)
UNE-EN ISO 11363-1:2018 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
UNE-EN ISO 11363-2:2018 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)

BE-NBN, Screw Micro Vials

国家市场监督管理总局、中国国家标准化管理委员会, Screw Micro Vials

GB/T 39641-2020 Methods for gaging fastening screw threads by thread indicating gages
GB/T 22522-2021 Metric series wires for measuring screw threads

National Metrological Verification Regulations of the People's Republic of China, Screw Micro Vials

JJG(石油) 37-1994 Sucker rod thread gauge
JJG(石油) 51-2000 Verification Regulation of Master Gage for Rotary Shouldered Connections Thread,Casing Round Thread and Tubing Thread
JJG(石油) 41-1996 Verification Regulation of Casing and Tubing Round Thread Working

National Metrological Technical Specifications of the People's Republic of China, Screw Micro Vials

JJF 1108-2003 Calibration Specification for Working Gauge of Rotary Shouldered Connections,Round Thread Casing and Tubing

API - American Petroleum Institute, Screw Micro Vials

API STD 5B-1988 Specification for Threading@ Gaging@ and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (THIRTEENTH EDITION)
API SPEC 5B KAZAKH-2008 Specification for Threading@ Gauging and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (FIFTEENTH EDITION)
API STD 5B-1987 SPECIFICATION FOR THREADING@ GAGING@ AND THREAD INSPECTION OF CASING@ TUBING@ AND LINE PIPE THREADS (ERRATA - MAY 1987)

IN-BIS, Screw Micro Vials

Professional Standard - Military and Civilian Products, Screw Micro Vials

WJ 1160-1979 Thread gauge and technical conditions Trapezoidal thread ring gauge (D=10~100mm)
WJ 1822-1988 Ordinary thread gauge structure type and size Ordinary thread ring gauge
WJ 1158-1988 Ordinary thread gauge structure type and size Ordinary thread ring gauge
WJ 1164-1988 Ordinary thread gauge type and size Sleeve-type ordinary thread plug gauge
WJ 1163-1988 Ordinary thread gauge type and size Taper shank ordinary thread plug gauge

工业和信息化部, Screw Micro Vials

JB/T 10031-2019 55° Sealing Pipe Thread Gauge
JBT10031-2019 55° Sealing Pipe Thread Gauge
HG/T 5449-2018 Tire valve thread gauge

Professional Standard - Automobile, Screw Micro Vials

QC/T 597-1999 Threaded fastener pre-coated microcapsule anaerobic dry film adhesive

TZ-TBS, Screw Micro Vials

TZS 171-1983 Tanzania Standard ISO General purpose metric screw threads — Tolerances: Limits of sizes for commercial bolt and nut threads — Medium quality

CU-NC, Screw Micro Vials

NC 06-70-1969 ISO metric screw threads. Tolerances. Limits of sizes for medium quality commercial bolt and nut threads

Defense Logistics Agency, Screw Micro Vials

DLA MS51830 REV F-2012 INSERT, SCREW ?THREAD, LOCKED IN, KEY-LOCKED, MINIATURE AND LIGHTWEIGHT

AIA/NAS - Aerospace Industries Association of America Inc., Screw Micro Vials

NA0147-2018 INSERT@ SCREW THREAD@ KEY LOCKED@ A286 CRES@ MINIATURE@ METRIC (Rev 3)
NA0147-2011 INSERT@ SCREW THREAD@ KEY LOCKED@ A286 CRES@ MINIATURE@ METRIC (Rev 2)
NA0147-1994 Insert@ Screw Thread Key Locked@ A286 Cres Miniature@ Metric (Rev 1)
NAS1673-1983 Fastener - Blind@ Internally Threaded@ External Sleeve@ Lightweight@ Protruding Head Self-Locking (Rev 2)