ZH
RU
ES

Oxygen pool surface

Oxygen pool surface, Total:499 items.

In the international standard classification, Oxygen pool surface involves: Wastes, Paints and varnishes, Products of the chemical industry, Installations in buildings, Insulating fluids, Ceramics, Analytical chemistry, Surface treatment and coating, Nuclear energy engineering, Non-ferrous metals, Metalliferous minerals, Components for electrical equipment, Manufacturing processes in the rubber and plastics industries, Magnetic materials, Testing of metals, Road engineering, Mechanical testing, Solar energy engineering, Products of non-ferrous metals, Products of the textile industry, Iron and steel products, Organic chemicals, Sterilization and disinfection, Water quality, Rubber, Lubricants, industrial oils and related products, Inorganic chemicals, Ferrous metals, Linear and angular measurements, Raw materials for rubber and plastics, Paint ingredients, Adhesives, Pipeline components and pipelines, Glass, Welding, brazing and soldering, Particle size analysis. Sieving.

AWS - American Welding Society, Oxygen pool surface

C4.1 SET-1977 Oxygen Cutting Surface Roughness Gauge and Chart for Criteria Describing Oxygen Cut Surfaces
C4.1-1977 CRITERIA FOR DESCRIBING OXYGEN-CUT SURFACES
C4.1-WC-1977 "Criteria for Describing Oxygen-Cut Surface (8 1/2"" x 11"" 5 PG Chart)"
C4.1G- Oxygen Cutting Surface Roughness Gauge (Plastic) (See also AWS C4.1 Set and AWS C4.1-WC)

RO-ASRO, Oxygen pool surface

STAS 7258/2-1971 Surface active agents LINEAR PRIMARY ALKYLSUL- PHATE BASE WETTING AGENT
STAS 6098-1980 SURFACE AGENTS Solubility and stability determination against sodium hydroxide
STAS SR ISO 1065:1995 Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents - Determination of cioud point
STAS SR ISO 2270:1995 Nonionic surface . active agents - Polyetoxilated dertvates lodometrical determination of the oxyethylenic groups
STAS 10938-1983 Surface agents ETHOXILATED NON IONIC AGENTS BASED ON FAT ALCOHOLS General technical requirements for quality

American Welding Society (AWS), Oxygen pool surface

AWS PHB-4-2000 Everyday Pocket Handbook for Gas Metal Arc and Flux Cored Arc Welding
AWS C4.1-1977 Criteria for Describing Oxygen-Cut Surfaces

(U.S.) Ford Automotive Standards, Oxygen pool surface

FORD ESF-M6P3-A-1978 OXIDE COATING, SURFACE, (BLUE-BLACK FINISH)
FORD M3D115-A-1989 EPOXY - SURFACE OR GEL COAT
FORD M3D24-A-1990 EPOXY THERMOSETTING RESIN AND HARDENER - PLASTIC TOOL SURFACE COATING
FORD WSS-M21P41-A-2014 FASTENER FINISH, ANIONIC EPOXY ELECTROCOAT, BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSF-M2G339-A1-2015 ADHESIVE, EPOXY, THERMAL CURE, SURFACE MOUNTED COMPONENTS ***TO BE USED WITH FORD WSS-M99P1111-A***

SSPC - The Society for Protective Coatings, Oxygen pool surface

PAINT 34-1996 Water-Borne Epoxy Topcoat for Steel Surfaces
PAINT 28-1991 Water-Borne Epoxy Primer for Steel Surfaces

IN-BIS, Oxygen pool surface

IS 1378-1979

American Society for Testing and Materials (ASTM), Oxygen pool surface

ASTM D5879-95e1 Standard Practice for Surface Site Characterization for On-Site Septic Systems
ASTM D5879/D5879M-18 Standard Practice for Surface Site Characterization for On-Site Septic Systems
ASTM D2959-95 Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
ASTM D2959-95(2003) Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
ASTM D2959-95(2017) Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
ASTM B101-02 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
ASTM B101-01 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
ASTM B101-96 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
ASTM B1019-21 Standard Test Method for Determination of Surface Oxides on Copper Rod(for Electrical Purposes)
ASTM D4620-98 Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D4620-02(2007) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D4620-02(2021) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D1993-03(2008) Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D4620-02 Standard Test Method for Evaluating the Effective Surface Area of Zinc-Oxide in Rubber
ASTM D4620-02(2012) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM C1069-86(2004)e1 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D1149-78a Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen)
ASTM D4620-02(2017) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D1993-03 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D1993-03(2013) Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D1149-99 Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber
ASTM C1069-09 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D2959-95(2009) Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
ASTM C1069-09(2022) Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D1149-15 Standard Test Methods for Rubber Deterioration&x2014;Cracking in an Ozone Controlled Environment
ASTM D3933-98 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D3933-98(2004) Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D3933-98(2010) Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D1171-16e1 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)
ASTM D1171-18 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)
ASTM D1993-91(1997) Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D1993-18 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D5604-21 Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D1993-22 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM C1069-09(2014) Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption

Professional Standard - Chemical Industry, Oxygen pool surface

HG/T 4564-2013 Surface-tolerant epoxy coatings
HG/T 3073-1999 Rubber compounding ingredients.Silica,precipitated,hydrated.Determination of specific surface area - Nitrogen adsorption method

International Organization for Standardization (ISO), Oxygen pool surface

ISO 19619:2018 Surface active agents - Determination of free propylene oxide content in propylene oxide adduct surfactants - GC method
ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
ISO 2270:1972 Surface active agents — Ethylene oxide adducts — Iodometric determination of oxyethylene groups
ISO 2106:1982 Anodizing of aluminium and its alloys; Determination of mass per unit area (surface density) of anodic oxide coatings; Gravimetric method
ISO 6384:1981 Surface active agents; Technical ethoxylated fatty amines; Methods of analysis
ISO 21264:2019 Surface active agents — Detergents — Determination of alkylphenol ethoxylates
ISO 1065:1991 Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents; determination of cloud point
ISO 2106:1982/Amd 1:1983 Anodizing of aluminium and its alloys; determination of surface density of anodic oxide coatings; gravimetric method; amendment 1
ISO 17280:2015 Surface active agents - Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography
ISO 28340:2013 Combined coatings on aluminium - General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption
ISO 2270:1989 Non-ionic surface active agents; polyethoxylated derivatives; iodometric determination of oxyethylene groups
ISO 16560:2015 Surface active agents - Determination of polyethylene glycol content in nonionic ethoxylated surfactants - HPLC method
ISO 8008:1986 Aluminium oxide primarily used for the production of aluminium; Determination of specific surface area by nitrogen adsorption; Single-point method
ISO 1065:1975 Non-ionic surface active agents obtained from ethylene oxide — Determination of cloud temperature (cloud point)
ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
ISO 8215:1985 Surface active agents; Washing powders; Determination of total silica content; gravimetric method
ISO 12800:2003 Nuclear fuel technology - Guide to the measurement of the specific surface area of uranium oxide powders by the BET method
ISO 14701:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness
ISO 12800:2017 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
ISO 2767:1973 Surface treatments of metals — Anodic oxidation of aluminium and its alloys — Specular reflectance at 45 degrees — Total reflectance — Image clarity
ISO 14701:2011 Surface chemical analysis - X-ray photoelectron spectroscopy - Measurement of silicon oxide thickness
ISO 4326:1980 Non-ionic surface active agents; Polyethoxylated derivatives; Determination of hydroxyl value; Acetic anhydride method
ISO 6719:1986 Anodized aluminium and aluminium alloys; Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
ISO/TS 25138:2019 Surface chemical analysis — Analysis of metal oxide films by glow-discharge optical-emission spectrometry
ISO 6842:1989 Surface active agents; sulfated ethoxylated alcohols and alkylphenols; determination of total active matter content
ISO 9013:1992 Welding and allied processes; quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces
ISO 23157:2021 Determination of the silanol group content on the surface of fumed silica - Reaction gas chromatographic method

HU-MSZT, Oxygen pool surface

MNOSZ 23156-1956

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Oxygen pool surface

GB/T 42238-2022 Surface active agents—Determination of free propylene oxide content in propylene oxide adduct surfactants—GC method
GB/T 11847-2008 Determination of specific surface area of uranium dioxide power by BET capacity method
GB/T 11847-1989 Determination of specific surface area of uranium dioxide powder by multipoint BET method
GB/T 30860-2014 Test methods for surface roughness and saw mark of silicon wafers for solar cells
GB 9290-1988 Surface active agents－Technical ethoxylated fatty amines－Methods of analysis
GB/T 9290-1988 Surface active agents--Technical ethoxylated fatty amines--Methods of analysis
GB/T 29036-2012 Coloring of stainless steel by Oxidation.Specification and test methods
GB/T 9290-2008 Surface active agents.Technical ethoxylated fatty amines.Method of analysis
GB/T 5559-1993 Non-ionic surface active agents obtained from ethylene oxide and ethylene oxide/propylene oxide block copolymers. Determination of cloud point
GB/T 5559-2010 Non-ionic surface active agents obtained from ethylene oxide and ethylene oxide/propylene oxide block copolymers.Determination of cloud point
GB/T 23322-2009 Textiles.Determination of surfactant.Alkyphenol ethoxylates
GB/T 9634.1-2002 Ferrite cores-Guide on the limits of surface irregularities--Part 1: General specification
GB/T 20505-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
GB/T 31414-2015 Water based coatings.Determination of surfactant.Alkylphenol polyethoxylates
GB/T 9634.2-2002 Ferrite cores--Guide on the limits of surface irregularities--Part 2: RM-cores
GB/T 9634.4-2007 Ferrite cores Guide on the limits of surface irregularities Part 4: Ring-cores
GB/T 7385-2012 Non-ionic surface active agents.Polyethoxylated derivatives.Iodometric determination of oxyethylene groups
GB/T 7385-1994 Non-ionic surface active agents--Polyethoxylated derivatives--Iodometric determination of oxyethylene groups
GB/T 31225-2014 Test method for the thickness of silicon oxide on Si substrate by ellipsometer
GB/T 23656-2009 Rubber compounding ingredients.Silica,precipitated,hydrated.Determination of CTAB surface area
GB/T 9634.3-2002 Ferrite cores--Guide on the limits of surface irregularities--Part 3: ETD-cores and E-cores
GB/T 20506-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
GB/T 7384-1996 Non-ionic surface active agents--Polyethoxylated derivatives--Determination of hydroxyl value--Acetic anhydride method
GB/T 25188-2010 Thickness measurements for ultrathin silicon oxide layers on silicon wafers X-ray photoelectron spectroscopy

IPC - Association Connecting Electronics Industries, Oxygen pool surface

IPC 7721 4.7.1-1998 Surface Mount Pad Repair@ Epoxy Method

Professional Standard - Light Industry, Oxygen pool surface

QB/T 1219-1991 Technical conditions for bicycle surface oxidation treatment

Association Francaise de Normalisation, Oxygen pool surface

NF D12-210:2009 Sanitary appliances - Synthetic material toilet wash-basins and surfaces.
NF EN 1890:2006 Agents de surface - Détermination du point de trouble des agents de surface non ioniques obtenus par condensation d'oxydes d'éthylène
NF EN 17059:2018 Lignes de traitement de surface et d'anodisation - Prescription de sécurité
NF A91-480:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method.
NF T73-286*NF EN 13268:2001 Suface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts
NF EN 1791:1997 Agents de surface - Oxydes d'alkyldiméthylamine grasses - Détermination de la teneur en oxyde d'amine.
NF T73-403*NF EN 1890:2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
NF EN 13268:2001 Agents de surface - Détermination de la teneur en oxyde d'éthylène et en oxyde de propylène dans les condensats à base d'oxyde d'éthylène et d'oxyde de propylène
NF T73-423*NF EN 12836:2002 Surface active agents - Determination of the water number of alkoxylated products
NF EN 12836:2002 Agents de surface - Détermination du nombre d'eau dans les produits alkoxylés
NF ISO 2270:1989 Agents de surface non ioniques - Dérivés polyéthoxyles - Dosage iodométrique des groupes oxyéthylène.
NF C93-340-5*NF EN 60424-5:2015 Ferrite cores - Guide on the limits of surface irregularities - Part 5 : planar-cores
NF A91-480*NF EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
NF C93-340-2*NF EN 60424-2:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2 : RM-cores
NF T73-203*NF ISO 2270:1989 Non-ionic surface active agents. Polyethoxylated derivatives. Iodometric determination of oxyethylene groups.
NF EN ISO 15927-3:2009 Performance hygrothermique des bâtiments - Calcul et présentation des données climatiques - Partie 3 : calcul d'un indice de pluie battante pour surfaces verticales à partir de données horaires de vent et de pluie
NF A91-450:2011 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium.
NF T73-278*NF EN 13320:2002 Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates
NF EN 13320:2002 Agents de surface - Détermination de traces d'oxyde d'éthylène libre dans les éthoxylats par chromatographie en phase gazeuse
NF A91-422:1988 SURFACE TREATMENTS. ANODIZED ALUMINIUM AND ALUMINIUM ALLOYS. MEASUREMENT OF SPECULAR REFLECTANCE AND SPECULAR GLOSS AT ANGLES OF 20 DEGREES,45 DEGREES,60 DEGREES OR 85 DEGREES.
NF C93-340-1:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 1 : general specification.
NF C93-340-1*NF EN 60424-1:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1 : general specification
NF A91-451:1999 Traitements de surface - Aluminium et alliages d'aluminium anodisés - Qualification des produits de nettoyage.
NF C93-093-9*NF EN IEC 63093-9:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9 : planar cores
NF T73-322*NF EN 1791:1997 Surface active agents. Fatty alkyl dimethyl amine oxides. Determination of the amine oxide content.
NF T20-219:1987 Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption. Single-point method.
NF M60-456*NF EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
NF A91-420:1988 Surface treatments. Anodized aluminium and aluminium alloys. Specular reflectance at 45 degrees. Total reflectance. Image clarity.
NF A91-421:1988 SURFACE TREATMENTS. ANODIZED ALUMINIUM AND ALUMINIUM ALLOYS. MEASUREMENT OF REFLECTANCE CHARACTERISTICS OF ALUMINIUM SURFACES USING INTEGRATING SPHERE INSTRUMENTS.
NF C93-340-8*NF EN 60424-8:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 8 : PQ-cores
NF C93-333:1987 Composants magnétiques et ferrites - Bobines de faible valeur d'inductance pour montage en surface - Prescriptions générales
NF C93-340-4:2004 Ferrite cores - Guide on the limits of surface irregularities - Part 4 : ring cores.
NF C93-340-4*NF EN 60424-4:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4 : ring cores
NF EN 13926:2003 Agents de surface - Dérivés alkyloxylés - Détermination de l'indice d'hydroxyle - Méthode à la N-méthylimidazole
NF T73-242:1995 Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Determination of content of unsulfated matter.
NF T73-284*NF EN 13926:2003 Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method.
NF EN IEC 63093-14:2019 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 14 : noyaux EFD
NF EN 12582:1999 Agents de surface - Détermination de la teneur en polyéthylène glycol en relation avec leur masse molaire dans les agents de surface non ioniques (condensats d'oxyde d'éthylène) par CLHP/DEDL
NF A91-488*NF EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
NF T73-242*NF EN ISO 8799:2009 Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter.
NF A91-404:1966 Surface treatment of metals. Anodizing (anodic oxydizing) of aluminium and its alloys. Measurement of thickness.
NF C93-377-4*NF EN IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4 : RM-cores
NF C93-093-14*NF EN IEC 63093-14:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14 : EFD-cores
NF C93-093-7*NF EN IEC 63093-7:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7 : EER-cores
NF C93-093-13*NF EN IEC 63093-13:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13 : PQ-cores
NF EN ISO 8799:2009 Agents de surface - Sulfates d'alcools et d'alkylphénols éthoxylés - Détermination de la teneur en matière insulfatée
NF EN IEC 63093-4:2019 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 4 : noyaux RM
NF EN IEC 63093-8:2022 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 8 : noyaux E
NF EN ISO 12800:2019 Technologie du combustible nucléaire - Lignes directrices pour le mesurage de l'aire massique (surface spécifique) des poudres d'oxyde d'uranium par la méthode BET
NF EN IEC 63093-7:2018 Noyaux de ferrite - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 7 : noyaux EER
NF EN IEC 63093-13:2019 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 13 : noyaux PQ
NF C93-340-3:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 3 : ETD-cores and E-cores.
NF T73-241*NF ISO 6843:1988 Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Estimation of the mean relative molecular mass.
NF T73-272:1978 Non-ionic surface active agents. Polyethoxylated derivatives. Determination of hydroxyl value. Acetic anhydride method.
NF T73-273:1978 Non-ionic surface active agents. Polyalkoxylated derivatives. Determination of hydroxyl value. Phthalic anhydride method.
NF A87-000:1995 Welding and allied processes. Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces.
NF A91-411:1966 Surface treatment of metals. Anodisation (anodic oxidation) of aluminium and its alloys. Check of corrosion resistance.
NF C93-093-12*NF EN IEC 63093-12:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12 : ring-cores
NF EN IEC 63093-12:2019 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 12 : noyaux toriques
NF EN IEC 63093-1:2020 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 1 : spécification générale
NF EN IEC 63093-9:2020 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 9 : noyaux planaires

British Standards Institution (BSI), Oxygen pool surface

BS ISO 19619:2018 Surface active agents. Determination of free propylene oxide content in propylene oxide adduct surfactants. GC method
BS EN 13268:2001 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adductspylene
BS EN 13268:2001(2004) Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adductspylene
BS EN 12836:2002 Surface active agents - Determination of the water number of alkoxylated products
BS EN 1791:1997 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content
BS EN 1890:2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
BS EN 60424-5:2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5:Planar-cores
BS EN IEC 63093-9:2020 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - Planar cores
DD ENV 12836-2001 Surface active agents. Determination of the water number of alkoxylated products
BS EN 60424-1:2000 Guidance of the limits of surface irregularities of ferrite cores - General specification
BS EN 60424-1:2016 Ferrite cores. Guidelines on the limits of surface irregularities. General specification
BS ISO 16560:2015 Surface active agents. Determination of polyethylene glycol content in nonionic ethoxylated surfactants. HPLC method
BS EN ISO 2106:2011 Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
BS EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
BS EN ISO 2106:2020 Tracked Changes. Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
BS EN 60424-2:1998 Guidance of the limits of surface irregularities of ferrite cores - RM-cores
BS EN 60424-3:1999 Guidance of the limits of surface irregularities of ferrite cores - ETD-cores and E-cores
BS EN 60424-4:2001 Guidance of the limits of surface irregularities of ferrite cores - Ring cores
BS EN 60424-2:2016 Ferrite cores. Guidelines on the limits of surface irregularities. RM-cores
BS EN 60424-4:2016 Ferrite cores. Guidelines on the limits of surface irregularities. Ring-cores
BS EN 60424-8:2015 Ferrite cores. Guidelines on the limits of surface irregularities. PQ-cores
BS ISO 28340:2013 Combined coatings on aluminium. General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
BS 6829-4.3:1990 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of oxyethylene groups
BS ISO 12800:2017 Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
BS ISO 17280:2015 Surface active agents. Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography
BS EN IEC 63093-7:2018 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - EER-cores
BS ISO 21264:2019 Surface active agents. Detergents. Determination of alkylphenol ethoxylates
19/30355099 DC BS EN ISO 2106. Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
BS EN 13320:2002 Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates
BS EN IEC 63093-4:2019 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - RM-cores
BS EN IEC 63093-12:2019 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - Ring-cores
BS EN IEC 63093-13:2019 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - PQ-cores
BS ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption
BS EN ISO 12800:2019 Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
BS EN IEC 63093-8:2018 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - E-cores
BS EN 12582:1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
BS EN 12582:1999(2009) Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
BS EN ISO 7599:2018 Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium
BS DD ISO/TS 25138:2011 Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry
BS EN 60424-3:2016 Ferrite cores. Guidelines on the limits of surface irregularities. ETD-cores, EER-cores, EC-cores and E-cores
BS 6829-4.6:1988 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of hydroxyl value
BS EN IEC 63093-1:2020 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - General specification
BS EN 13926:2003 Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method
BS ISO 14701:2011 Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
BS ISO 8008:2006 Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption
BS EN ISO 23157:2022 Determination of the silanol group content on the surface of fumed silica. Reaction gas chromatographic method
BS 5350-G3:1987 Methods of test for adhesives - Determination of ability of anaerobic adhesives to set on metal surfaces
BS 4140-23:1987 Methods of test for aluminium oxide - Determination of specific surface area by nitrogen adsorption (single-point method)
BS EN ISO 6719:2010 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
BS EN 12373-12:2001 Aluminium and aluminium alloys - Anodizing - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
BS 6829 Sec.4.3:1990 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of oxyethylene groups
BS EN IEC 63093-3:2020 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - Half pot-cores made of ferrite for inductive proximity switches
BS ISO 23157:2021 Determination of the silanol group content on the surface of fumed silica. Reaction gas chromatographic method
BS 6161-18:1991 Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of surface abrasion resistance
BS 6829-4.5:1989 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of sulphated ash
BS ISO 14701:2018 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness

Electronic Components, Assemblies and Materials Association, Oxygen pool surface

ECA EIA-944-2002 Surface Mount Ferrite Chip Bead Qualification Specification
ECA EIA-944-2013 Surface Mount Ferrite Chip Bead Qualification Specification

Korean Agency for Technology and Standards (KATS), Oxygen pool surface

KS D 0408-1999 General guide on limits of surface irregularities
KS D 8310-2001 Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-destructive measurement by split-beam microscope)
KS D 8310-1986 Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-destructive measurement by split-beam microscope)
KS M ISO 1065-2003(2018) Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents－Determination of cloud point
KS M ISO 6384:2007 Surface active agents－Technical ethoxylated fatty amines－Methods of analysis
KS M ISO 6384-2007(2022) Surface active agents－Technical ethoxylated fatty amines－Methods of analysis
KS M ISO 6384-2007(2017) Surface active agents－Technical ethoxylated fatty amines－Methods of analysis
KS M ISO 2270:2008 Non-ionic surface N agents-Polyethoxylated derivatives-Iodometric determination of oxyethylene groups
KS M ISO 2270-2008(2018) Non-ionic surface active agents－Polyethoxylated derivatives－Iodometric determination of oxyethylene groups
KS M ISO 1065:2003 Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents－Determination of cloud point
KS M ISO 8008:2003 Aluminium oxide primarily used for the production of aluminium-Determination of specific surface area by nitrogen adsorption-Single-point method
KS C IEC 60424-1:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
KS C IEC 60424-2:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS C IEC 60424-8:2019 Ferrite cores — Guidelines on the limits of surface irregularities — Part 8: PQ-cores
KS C IEC 60424-2:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS M ISO 8799:2008 Surface active agents-Sulfated ethoxylated alcohols and alkylphenols-Determination of content of unsulfated matter
KS M ISO 8799:2014 Surface active agents — Sulfated ethoxylated alcohols and alkylphenols — Determination of content of unsulfated matter
KS C IEC 60424-4:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS M ISO 8215-2007(2018) Surface active agents－Washing powders－Determination of total silica content－Gravimetric method
KS C IEC 60424-2-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS C IEC 60424-4:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS M ISO 6843:2008 Surface active agents-Sulfated ethoxylated alcohols and alkylphenols-Estimation of the mean relative molecular mass
KS M ISO 6843:2013 Surface active agents－Sulfated ethoxylated alcohols and alkylphenols－Estimation of the mean relative molecular mass
KS C IEC 60424-3:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
KS C IEC 60424-4-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS C IEC 60424-1:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
KS M ISO 8215:2007 Surface active agents－Washing powders－Determination of total silica content－Gravimetric method
KS C IEC 60424-1-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
KS D 8310-2001(2016) Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
KS D 8310-2001(2021) Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
KS M ISO 4326:2008 Non-ionic surface active agents－Polyethoxylated derivatives－Determination of hydroxyl value－Acetic anhydride method
KS C IEC 60424-3:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
KS M ISO 4326-2008(2018) Non-ionic surface active agents－Polyethoxylated derivatives－Determination of hydroxyl value－Acetic anhydride method
KS M ISO 6842:2008 Surface active agents-Sulfated ethoxylated alcohols and alkylphenols-Determination of total active matter content
KS M ISO 8008-2003(2018)
KS C IEC 60424-3-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores

European Committee for Standardization (CEN), Oxygen pool surface

EN 1791:1997 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content
EN 13268:2001 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts
EN 1890:2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
EN 1890:1999 Surface Active Agents - Determination of Cloud Point of Non-Ionic Surface Active Agents Obtained by Condensation of Ethylene Oxide
DD ENV 12836-1999 Surface Active Agents - Determination of the Water Number of Alkoxylated Products
EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011)
EN 13320:2002 Surface Active Agents - Gas Chromatographic Trace Determination of Free Ethylene Oxide in Ethoxylates
EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)
EN 13926:2003 Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method
EN 12836:2002 Surface active agents - Determination of the water number of alkoxylated products
EN ISO 8799:1995 Surface Active Agents - Sulfated Ethoxylated Alcohols and Alkylphenols - Determination of Content of Unsulfated Matter (ISO 8799 : 1988)
EN 12582:1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
EN 12373-2:1998 Aluminium and Aluminium Alloys - Anodizing - Part 2: Determination of Mass Per Unit Area (Surface Density) of Anodic Oxidation Coatings - Gravimetric Method Ratified European Text
EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)
EN ISO 23157:2022 Determination of the silanol group content on the surface of fumed silica - Reaction gas chromatographic method (ISO 23157:2021)

German Institute for Standardization, Oxygen pool surface

DIN EN 1791:1997 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content; German version EN 1791:1997
DIN EN 13268 Berichtigung 1:2007 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts; German version EN 13268:2001, Corrigenda to DIN EN 13286:2001-07
DIN EN 1890:2006-09 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide; German version EN 1890:2006
DIN EN 1890:2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide English version of DIN EN 1890:2006-09
DIN EN 12836:2002-06 Surface active agents - Determination of the water number of alkoxylated products; German version EN 12836:2002
DIN EN 1791:1997-03 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content; German version EN 1791:1997
DIN EN 13268 Berichtigung 2:2007-06 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts; German version EN 13268:2001, Corrigenda to DIN EN 13268:2001-07
DIN EN 13268:2001-07 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts; German version EN 13268:2001
DIN EN 13268 Corrigendum 2:2007 Surface active agents-Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts Corrigendum 2 to English version of DIN EN 13268:2001-07
DIN EN ISO 2106:2020-05 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019); German version EN ISO 2106:2020
DIN 19279:2018-01 Photocatalytic activity of surfaces - Determination of the photocatalytic deposition velocity of nitrogen monoxide at photocatalytically active surfaces
DIN EN 13268 Berichtigung 2:2007 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts; German version EN 13268:2001, Corrigenda to DIN EN 13286:2001-07
DIN EN 12582:1999-05 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD; German version EN 12582:1999
DIN EN 60424-4:2001 Ferrit cores - Guide on the limits of surface irregularities - Part 4: Ring-cores (IEC 60424-4:2001); German version EN 60424-4:2001
DIN 19643-2:1997 Treatment of water of swimming-pools and baths - Part 2: Combination of process: Adsorption, flocculation, filtration, chlorination
DIN EN 13320:2002-09 Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates; German version EN 13320:2002
DIN EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
DIN EN 13268:2001 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts; German version EN 13268:2001
DIN EN IEC 63093-9:2021-03 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores (IEC 63093-9:2020); German version EN IEC 63093-9:2020 / Note: DIN EN 60424-5 (2009-12) and DIN EN 62317-9 (2008-01) remain valid alongside this st...
DIN EN 12582:1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD; German version EN 12582:1999
DIN EN 60424-1:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification (IEC 60424-1:1999); German version EN 60424-1:1999
DIN EN ISO 12800:2019-09 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German version EN ISO 12800:2019
DIN EN 13926:2003 Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value; N-methyl imidazole method; German version EN 13926:2003
DIN EN 60424-2:1998 Guidance on the limits of surface irregularities of ferrite cores - Part 2: RM-cores (IEC 60424-2:1997); German version EN 60424-2:1997
DIN EN 13926:2003-06 Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value; N-methyl imidazole method; German version EN 13926:2003
DIN EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011); German version EN ISO 2106:2011
DIN EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)
DIN EN ISO 12800:2018 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German and English version prEN ISO 12800:2018
DIN EN ISO 23157:2022-12 Determination of the silanol group content on the surface of fumed silica - Reaction gas chromatographic method (ISO 23157:2021); German version EN ISO 23157:2022
DIN EN 12836:2002 Surface active agents - Determination of the water number of alkoxylated products; German version EN 12836:2002
DIN EN 60424-3:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores (IEC 60424-3:1999); German version EN 60424-3:1999
DIN EN IEC 63093-14:2019-12 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores (IEC 63093-14:2019); German version EN IEC 63093-14:2019 / Note: DIN EN 62317-14 (2009-03) remains valid alongside this standard until 2022-05-09.
DIN EN IEC 63093-4:2019-11 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores (IEC 63093-4:2019); German version EN IEC 63093-4:2019 / Note: DIN EN 60424-2 (2016-10), DIN EN 62317-4 (2006-07) and DIN EN 62317-4 Berichtigung 1 (20...
DIN EN IEC 63093-13:2019-12 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores (IEC 63093-13:2019); German version EN IEC 63093-13:2019 / Note: DIN EN 60424-8 (2016-07) and DIN EN 62317-13 (2016-07) remain valid alongside this st...
DIN EN IEC 63093-12:2019-12 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores (IEC 63093-12:2019); German version EN IEC 63093-12:2019 / Note: DIN EN 60424-4 (2016-10) and DIN EN 62317-12 (2017-05) remain valid alongside this ...
DIN EN IEC 63093-1:2021-03 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification (IEC 63093-1:2020); German version EN IEC 63093-1:2020 / Note: DIN EN 60424-1 (2016-10) and DIN EN 62317-1 (2008-02) remain valid alongsid...

Professional Standard - Building Materials, Oxygen pool surface

JC/T 995-2006 Zirconia powder with low specific surface area and better sinter ability

Professional Standard - Customs, Oxygen pool surface

HS/T 4-2006 Identification of surface treatment of silicon dioxide with organic materials

ECIA - Electronic Components Industry Association, Oxygen pool surface

EIA-944-2013 Surface Mount Ferrite Chip Bead Qualification Specification
EIA-944-2002 Surface Mount Ferrite Chip Bead Qualification Specification

海关总署, Oxygen pool surface

HS/T 47-2014 Method for identification of organic surface-treated silica
HS/T 54-2017 Method for identification of nonylphenol polyoxyethylene ether in surfactants

工业和信息化部/国家能源局, Oxygen pool surface

JB/T 12854-2016 Technical conditions for zirconium oxide conversion treatment on metal surfaces

The Society for Protective Coatings (SSPC), Oxygen pool surface

SSPC PAINT 34-1996 Water-Borne Epoxy Topcoat for Steel Surfaces
SSPC PAINT 28-1991 Water-Borne Epoxy Primer for Steel Surfaces

Danish Standards Foundation, Oxygen pool surface

DS/EN 1890:2006 Surface active agents – Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
DS/EN 12836:2002 Surface active agents - Determination of the water number of alkoxylated products
DS/EN 1791:1998 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content
DS/EN 13268/AC:2002 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts.
DS/EN 13268:2001 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts.
DS/EN 60424-5:2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores
DS/EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
DS/ISO 2106:1988 Anodizing of aluminium and its alloys. Determination of mass pr. unit area (surface density) of anodic oxide coatings. Gravimetric method
DS/EN 13320:2002 Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates
DS/EN 12582:1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
DS/EN ISO 4518:1995 Metallic coatings - Measurement of coating thickness - Profiliometric method
DS/EN 60424-2:1998 Guidance of the limits of surface irregularities of ferrite cores - Part 2: RM-cores
DS/EN 60424-1:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification
DS/EN 60424-4:2001 Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores
DS/EN 13926:2003 Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method
DS/EN 60424-3:2000 Ferrit cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores

Lithuanian Standards Office , Oxygen pool surface

LST EN 1890-2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
LST EN 12836-2002 Surface active agents - Determination of the water number of alkoxylated products
LST EN 1791-2002 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content
LST EN 13268+AC-2002 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts
LST EN 13320-2002 Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates
LST EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011)
LST EN 60424-5-2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores (IEC 60424-5:2009)
LST EN 12582-2002 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
LST EN 13926-2003 Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method
LST EN 60424-2-2001 Guidance of the limits of surface irregularities of ferrite cores. Part 2: RM-cores (IEC 60424-2:1997)

AENOR, Oxygen pool surface

UNE-EN 1890:2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
UNE-EN 12836:2002 Surface active agents- Determination of the water number of alkoxylated products.
UNE-EN 1791:1997 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content
UNE 55730:1982 SURFACE ACTIVE AGENTS. NON-IONIC SURFACE ACTIVE AGENTS. POLYETHOXYLATED DERIVATIVES. DETERMINATION OF HYDROXYL VALUE. ACETIC ANHYDRIDE METHOD
UNE 55731:1982 SURFACE ACTIVE AGENTS. NON-IONIC SURFACE ACTIVE AGENTS. POLYALKAXYLATED DERIVATIVES. DETEMINATION OF HYDROXYL VALUE. PHTALIC ANHYDRIDE METHOD
UNE-EN 13320:2002 Surface active agents- Gas chromatographic trace determination of free ethylene oxide in ethoxylates.
UNE 55732:1984 SURFACE ACTIVE AGENTS. TECHNICAL ETHOXYLATED FATTY AMINES. METHODE OF ANALYSIS
UNE 55546:1979 SURFACE ACTIVE AGENTS. WASHING POWDERS. DETERMINATION OF ACTIVE OXYGEN CONTENT. TITRIMETRIC METHOD
UNE 55518:1991 NON-IONIC SURFACE ACTIVE AGENTS. POLYETHOXYLATED DERIVATIVES. IODOMETRIC DETERMINATION OF OXYETHYLENE GROUPS
UNE-EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011)
UNE 55837:1987 SURFACE ACTIVE AGENTS. WASHING POWDERS. DETERMINATION OF TOTAL SILICA CONTENT. GRAVIMETRIC METHOD
UNE-EN 12582:1999 SURFACE ACTIVE AGENTS - DETERMINATION OF THE POLYETHYLENE GLYCOL CONTENT ACCORDING TO MOLAR MASS IN NON-IONIC SURFACE AGENTS (ETHOXYLATED) BY HPLC/ELSD.
UNE 53572:2014 Rubber. Determination of surface cracking of rubber articles exposed to the weather or ozone chamber
UNE 48265:1992 COATINGS COMBINED WITH ANODIC OXIDATION AND ORGANIC FINISHING ON ALUMINIUM AND THEIR ALLOYS.
UNE-EN 13926:2003 Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method
UNE 55527:1979 SURFACE ACTIVE AGENTS. WASHING POWDERS. DETERMINATION OF TOTAL PHOSPHORUS (V) OXIDE CONTENT. QUINOLINE PHOSPHOMOLYBDATE METHOD

PL-PKN, Oxygen pool surface

PN C04836-1986 Surface active agents Ethylene oxide adducts Iodometric determination of oxyethylene groups
PN C04550 ArkusZ04-1974 Water and waste water Tests for synthetic surface active agents and theirs biochemical oxidation Determination of nonionic poly- ethoxylic synthetic surface active agents by colorimetric method with phosphotungstic acid
PN C04550 ArkusZ03-1972 Water and waste waterTests for synthetic surface active agents and theirs biochemical oxidation Determination of nonionic, polyethoxyHc synthetic surface active agents by colorimetric method with ammo- nium cobaltothiocyanate
PN C04550 ArkusZ10-1972 Water and waste water Tests for synthetic surface active agents and theirs biochemical oxidation
PN C04835-1986 Non-ionic surface active agents obtained from ethylene oxide Determination of cloud temperatur? (cloud point)
PN C04838-1986 Non ionic surface active agents Polyetoxylated derivates Determination of hydroxyl value Phtalic anhydride method
PN C04837-1986 Non ionic surface active agents Polyethoxylated derivates Determination of hydroxyl value Acetic anhydride method
PN C04550-12-1989 Water and waste water Tests for synthetic surface active agents and their biochemical oxidation Determination of biodegradability of anonic surfactans — primary test
PN-EN IEC 63093-9-2021-01 E Ferrite cores -- Guidelines on dimensions and the limits of surface irregularities -- Part 9: Planar cores (IEC 63093-9:2020)
PN-EN ISO 18771-2021-03 E Anodizing of aluminium and its alloys -- Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019)

BR-ABNT, Oxygen pool surface

ABNT NBR 14232-2012 Aluminium and its alloys - Surface treatment - Anodizing for consumer goods
ABNT NBR 12609-2012
ABNT NBR 9243-2012 Aluminium and its alloys - Surface treatment - Determination of sealing anodic layers - Method of weight loss

Standard Association of Australia （SAA）, Oxygen pool surface

AS 2879.4:2003 Alumina - Determination of specific surface area by nitrogen adsorption

ZA-SANS, Oxygen pool surface

SANS 2106:1982 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxide coatings - Gravimetric method

Japanese Industrial Standards Committee (JISC), Oxygen pool surface

JIS H 8688:2013 Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxidation coatings
JIS C 2560-3:2016 Cores made of ferrite -- Part 3: Dimensions and surface irregularities

ES-UNE, Oxygen pool surface

UNE-EN 13268:2002 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts.
UNE-EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
UNE-EN IEC 63093-9:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017) (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN ISO 23157:2023 Determination of the silanol group content on the surface of fumed silica - Reaction gas chromatographic method (ISO 23157:2021)
UNE-EN IEC 63093-13:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores (Endorsed by Asociación Española de Normalización in May of 2019.)
UNE-EN IEC 63093-8:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores (Endorsed by Asociación Española de Normalización in November of 2018.)
UNE-EN IEC 63093-7:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores (Endorsed by Asociación Española de Normalización in June of 2018.)
UNE-EN IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores (Endorsed by Asociación Española de Normalización in June of 2019.)
UNE-EN IEC 63093-14:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN IEC 63093-1:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification (Endorsed by Asociación Española de Normalización in July of 2020.)

International Electrotechnical Commission (IEC), Oxygen pool surface

IEC 60424-5:2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores
IEC 63093-9:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores
IEC 60424-2:1997 Guidance on the limits of surface irregularities of ferrite cores - Part 2: RM-cores
IEC 60424-1:1999 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification
IEC 60424-1:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification
IEC 60424-8:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 8: PQ-cores
IEC 60424-2:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores
IEC 60424-4:2001 Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores
IEC 60424-4:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores
IEC 60424-3:1999 Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores
IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores
IEC 63093-14:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores
IEC 63093-1:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
IEC 63093-8:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores
IEC 63093-13:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores
IEC 63093-7:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores
IEC 63093-12:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores
IEC 63093-3:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches
IEC 60424-3:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 3: ETD-cores, EER-cores, EC-cores and E-cores

PT-IPQ, Oxygen pool surface

Group Standards of the People's Republic of China, Oxygen pool surface

T/FSI 049-2020 Test method for silanol content on the surface of fumed silica
T/CHTS 10032-2021 Technical Guideline for Highway Surface Treatment of Epoxy Asphalt
T/CHTS 10006-2018 Technical Guideline of Surface Treatment by Color Polyurethane and Modified Epoxy Resin Mixtures for Highway Pavement
T/ZZB 3068-2023 Chlorine dioxide disinfectant tablets for object surface and air disinfection
T/CNTAC 47-2020 Textiles Screenigng method of surfactant-Alkylphenol ethoxylates

European Committee for Electrotechnical Standardization（CENELEC）, Oxygen pool surface

EN 60424-5:2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores
EN IEC 63093-9:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores
EN 60424-8:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 8: PQ-cores
EN 60424-2:1997 Guidance of the Limits of Surface Irregularities of Ferrite Cores - Part 2: RM-Cores
EN 60424-2:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores
EN 60424-4:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores
EN 60424-1:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification
EN IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores
EN IEC 63093-8:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores

BE-NBN, Oxygen pool surface

NBN T 63-121-1980 Surface active agents - Ethylene oxide adducts - Iodometric determi-nation of oxyethylene groups
NBN T 63-146-1981 Surface active agents - Technical ethoxylated fatty amines - Methods of analysis
NBN T 63-115-1980 Non-ionic surface active agents obtained from ethylene oxide -Determination of cloud temperature(cloud point
NBN-ISO 2270:1990 Non-ionic surface active agents - Polyethoxylated derivatives - lodometric determination of oxyethylene groups
NBN T 63-153-1983 Surface active agents - Polyethoxylated alcohol and alkylphenol sulfates -Determination of total active matter content
NBN T 63-163-1988 Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter
NBN T 03-425-1988 Aluminium oxide primarily used forthe production of aluminium - Determination of specifie surface area by nitrogen adsorption - Single-point method
NBN T 63-162-1988 Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Estimation of the mean relative molecular mass
NBN T 63-143-1980 Non-ionic surface active agents - Polyalkoxylated derivatives - Determination of hydroxyl value - Phthalic anhydride method
NBN-ISO 6842:1990 Tenside - Sulfatierte, ethoxylierte Alkohole und Alkylphenole - Bestimmung des Gesamt - aktiven -Stoffengehaltes

YU-JUS, Oxygen pool surface

JUS H.E8.053-1992 Surface active agents.Technical ethoxylated fatty amines. Methods of analysis

Taiwan Provincial Standard of the People's Republic of China, Oxygen pool surface

CNS 12706-1990 Method of Test for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption

KR-KS, Oxygen pool surface

KS M ISO 1065-2003(2023) Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents－Determination of cloud point
KS M ISO 2270-2008(2023) Non-ionic surface active agents－Polyethoxylated derivatives－Iodometric determination of oxyethylene groups
KS L 1676-2023 Test method for the fixing performance of nitrogen oxides and sulfur oxides on the surface of photocatalytic construction materials
KS C IEC 60424-8-2019 Ferrite cores — Guidelines on the limits of surface irregularities — Part 8: PQ-cores
KS C IEC 60424-2-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS M ISO 8215-2007(2023) Surface active agents－Washing powders－Determination of total silica content－Gravimetric method
KS C IEC 60424-1-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
KS C IEC 60424-4-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS C IEC 60424-3-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
KS M ISO 4326-2008(2023) Non-ionic surface active agents－Polyethoxylated derivatives－Determination of hydroxyl value－Acetic anhydride method
KS M ISO 6842-2008 Surface active agents－Sulfated ethoxylated alcohols and alkylphenols－Determination of total active matter content

American National Standards Institute （ANSI), Oxygen pool surface

ANSI/ASTM E1039:1999 Test Method for Calibration and Characterization of Non-Concentrator Terrestrial Photovoltaic Reference Cells Under Global Irradiation
ANSI/AWWA C116/A21.16-2009 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings

TH-TISI, Oxygen pool surface

TIS 1755-1999 Non.ionic surface.active agents.obtained from ethylene oxide and mixed non-ionic surface.active agents.determination of cloud point
TIS 1756-1999 Non.ionic surface active agents.polyethoxylated derivatives.iodometric determination of oxyethylene groups
TIS 1758-1999 Non.ionic surface active agents.polyethoxylated derivatives.determination of hydroxyl value.acetic anhydride method

RU-GOST R, Oxygen pool surface

GOST R 50346-1992 Non ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents. Determination of cloud point

Professional Standard - Commodity Inspection, Oxygen pool surface

SN/T 4311-2015 Acute toxicity evaluation method for polyethenoxy ether surface active agent

European Association of Aerospace Industries, Oxygen pool surface

AECMA PREN 6085-1999 Aerospace Series Non-Metallic Materials Epoxy Surfacing Films Edition P1

Professional Standard - Non-ferrous Metal, Oxygen pool surface

YS/T 438.4-2001 Methods for physical performance determination of sandy alumina.Determination of specific surface area.B.E.T. method
YS/T 438.4-2013 Methods for physical performance determination of sandy alumina.Part 4:B.E.T method for determination of specific surface area

Professional Standard - Petrochemical Industry, Oxygen pool surface

NB/SH/T 0832-2010 Determination of hot surface oxidation of lubricating oils by pressure differential scanning calorimetry

Aerospace, Security and Defence Industries Association of Europe (ASD), Oxygen pool surface

ASD-STAN PREN 6085-1999 Aerospace Series Non-Metallic Materials Epoxy Surfacing Films (Edition P1)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Oxygen pool surface

GB/T 9634.8-2018 Ferrite cores—Guideline on the limits of surface irregularities—Part 8: PQ-cores
GB/T 23656-2016 Rubber compounding ingredients—Determination of surface area for silica，precipitated，hydrated—CTAB method
GB/T 32996-2016 Surface chemical analysis—Analysis of metal oxide films by glow-discharge optical emission spectrometry

未注明发布机构, Oxygen pool surface

BS ISO 8008:2005(2006) Aluminium oxide primarily used for the production of aluminium — Determination of specific surface area by nitrogen adsorption
DIN EN IEC 63093-8:2019 Ferrite cores – Guidelines on dimensions and limits of surface damage – Part 8: E cores
BS EN ISO 23157:2022(2023) Determination of the silanol group content on the surface of fumed silica — Reaction gas chromatographic method
BS EN IEC 63093-7:2018(2019) Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 7 : EER - cores

工业和信息化部, Oxygen pool surface

YB/T 4609-2017 Test methods for metallic chromium and chromium oxide on the surface of electroplated chromium steel plates and steel strips

国家市场监督管理总局、中国国家标准化管理委员会, Oxygen pool surface

GB/T 23322-2018 Textiles—Determination of surfactant—Alkylphenols and Alkylphenol ethoxylates
GB/T 38114-2019 Nanotechnologies—Quantitative analysis of the surface oxygen functional groups on graphene materials—Chemical titration method

CZ-CSN, Oxygen pool surface

CSN 68 1155-1994 Testing methods for surfactants and detergents. Determination of total phosphorus oxide content
CSN 68 1154-1994 Testing methods for surfactans and detergents. Determination of total silica content
CSN 70 0527 Cast.2-1986 Glass testing methods. Silicate glass. Method for the quantitative analysis of the extracts from the surface of glass products. Determination of boric oxide
CSN 70 0527 Cast.5-1986 Glass testing methods. Silicate glass. Method for the quantitative analysis of the extracts from the surface of glass products. Determination of lead oxide
CSN 70 0527 Cast.4-1986 Glass testing methods. Silicate glass. Method for the quantitative analysis of the extracts from the surface of glass products. Determination of iron oxide

ES-AENOR, Oxygen pool surface

IT-UNI, Oxygen pool surface

UNI EN ISO 18771:2020 Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper

ACI - American Concrete Institute, Oxygen pool surface

ACI 503.3M-2010 Specification for Producing a Skid-Resistant Surface on Concrete by the Use of Epoxy and Aggregate
ACI 503.3-2010 Specification for Producing a Skid-Resistant Surface on Concrete by the Use of Epoxy and Aggregate

SE-SIS, Oxygen pool surface

SIS SS-ISO 2106:1984 Anodizing of aluminium and its alloys - Determination of m?ss per unit area (surface density) of anodic oxide coatings - Gravimetric method
SIS SS-ISO 6719:1988 Anodized aluminium and its alloys — Measurement of reflectance characteris-tics of aluminium surfaces using integra- ting-sphere instruments

Professional Standard - Military and Civilian Products, Oxygen pool surface

WJ 2607-2003 General specifications for surface chemical treatment and electrochemical oxidation films of ordination products
WJ 1594-1984 Camera surface finish camera aluminum and aluminum alloy anodic oxidation coating technical specification

Professional Standard - Electricity, Oxygen pool surface

DL/T 5836-2021 Construction specification for concrete surface treatment of epoxy resin materials in hydropower and water conservancy projects

American Water Works Association (AWWA), Oxygen pool surface

AWWA C116/A21.16-2003 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service
AWWA C116/A21.16-2009 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings Includes Erratum: January 2010
AWWA C116/A21.16 ERTA-2010 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings

CENELEC - European Committee for Electrotechnical Standardization, Oxygen pool surface

EN IEC 63093-7:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores

Professional Standard - Machinery, Oxygen pool surface

JB/T 5190.11-1991 Technical requirements for chemical oxide film on ferrous metal parts for surface treatment of photomechanical parts