ZH
RU
ES

standard gas state

standard gas state, Total:418 items.

In the international standard classification, standard gas state involves: Natural gas, Test conditions and procedures in general, Hospital equipment, Pulps, Paper and board, Plastics, Environmental testing, Elements of buildings, Products of the chemical industry, Farming and forestry, Inorganic chemicals, Accident and disaster control, Power transmission and distribution networks, Medical equipment, Terminology (principles and coordination), Analytical chemistry, Measurement of volume, mass, density, viscosity, Applications of information technology, Data storage devices, Road vehicle systems, Technical product documentation, On-board equipment and instruments, Organic chemicals, Linear and angular measurements, Raw materials for rubber and plastics, Pipeline components and pipelines, Paints and varnishes, Air quality, Fishing and fish breeding, Protective equipment, Geology. Meteorology. Hydrology, Protection against fire, Telecommunication systems, Electrical accessories, Shipbuilding and marine structures in general, Medical sciences and health care facilities in general, Fasteners, Aerospace fluid systems and components, Pesticides and other agrochemicals, Vocabularies, Veterinary medicine, Rubber and plastics products, Shafts and couplings, Aerospace engines and propulsion systems, Soil quality. Pedology, Particle size analysis. Sieving, Character sets and information coding, Radiation protection, Valves, Water quality, Solar energy engineering, Aircraft and space vehicles in general, Environmental protection, Nuclear energy engineering, Photography, Products of the textile industry, Construction materials, Transport, Standardization. General rules, Mechanical structures for electronic equipment, Fuels, Fluid storage devices, Information technology (IT) in general, Ferrous metals, Electricity. Magnetism. Electrical and magnetic measurements, Coals, Buildings, Law. Administration, Insulating fluids, Fluid power systems, Capacitors, Occupational safety. Industrial hygiene, Welding, brazing and soldering, Measurement of fluid flow, Quantities and units, Leather technology, Refractories, Protection of and in buildings, Thermodynamics and temperature measurements.

German Institute for Standardization, standard gas state

DIN 1343:1990 Reference conditions, normal conditions, normal volume; concepts and values
DIN EN 1294:2000 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates; German version EN 1294:2000
DIN EN ISO 6144:2006-11 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003); German version EN ISO 6144:2006
DIN EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003); English version of DIN EN ISO 6144:2006-11
DIN EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003); English version of DIN EN ISO 6145-1:2008-11
DIN 51898-1:2014 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM
DIN 51898-1:2014-05 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM / Note: CD-ROM enclosed
DIN 51898-2:2017-10 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 2: Preparation from gas mixtures
DIN EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003); English version of DIN EN ISO 6145-6:2008-11
DIN EN 15852:2010-11 Ambient air quality - Standard method for the determination of total gaseous mercury; German version EN 15852:2010
DIN EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); English version of DIN EN ISO 6145-8:2008-11
DIN EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002); English version of DIN EN ISO 6145-10:2008-11
DIN EN ISO 6145-5:2011-03 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009); German version EN ISO 6145-5:2010
DIN EN ISO 6145-1:2020-02 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019); German version EN ISO 6145-1:2019

Standard Association of Australia （SAA）, standard gas state

AS ISO 13443:2007 Natural gas - Standard reference conditions

TR-TSE, standard gas state

TS 642-1968 STANDARD ATMOSPHERES FOR CONDITIONING AND/ OR TESTING STANDARD REFERENCE ATMOSPHERE
TS 348-1966 STANDARD ATMOSPHERIC COND?TIONS FOR TEST PURPOSES

HU-MSZT, standard gas state

Korean Agency for Technology and Standards (KATS), standard gas state

KS A 0006-2001 Standard atmospheric conditions for testing
KS A 0006-2014 Standard atmospheric conditions for testing
KS A 0006-1985 Standard atmospheric conditions for testing
KS I ISO 6144-2015(2020) Gas analysis－Preparation of calibration gas mixtures－Static volumetric method
KS I ISO 6145-10:2008 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 10:Permeation method
KS I ISO 6145-10:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 10：Permeation method
KS I ISO 6144:2010 Gas analysis-Preparation of calibration gas mixtures-Static volumetric method
KS I ISO 6144:2015 Gas analysis－Preparation of calibration gas mixtures－Static volumetric method
KS M 3090-1994(1999) STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING OF PLASTICS
KS M 1058-2010 Arsine (Standard reference gas)
KS M 1059-2010 Phosphine (Standard reference gas)
KS M 1014-1994 Oxygen(standard reference gas)
KS M 1056-2010 Reference material－Standard gas－Propane
KS M 1056-2010(2020) Reference material－Standard gas－Propane
KS I 2106-2009 Methane(standard reference gas)
KS I ISO 6145-1-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS I ISO 24094:2010 Analysis of natural gas－Validation methods for gaseous reference materials
KS M 1058-2013 Arsine (Standard reference gas)
KS I ISO 6145-6-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 6：Sonic orifices
KS I ISO 6145-10:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
KS I ISO 6145-9:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
KS A ISO 7589:2007 Photography－Illuminants for sensitometry－Specifications for daylight, incandescent tungsten and printer
KS I 2103-2009 Carbon monoxide(standard reference gas)
KS I 2105-2009 Sulfur dioxide(standard reference gas)
KS I 2102-2009 Carbon dioxide(standard reference gas)
KS I 2101-2009 Nitrogen monoxide(standard reference gas)
KS I ISO 6145-2-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 2：Volumetric pumps
KS I ISO 6145-8-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 8：Diffusion method
KS I ISO 6145-5-2015(2020) Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS I ISO 6145-6:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 6:Sonic orifices
KS I ISO 6145-6:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 6：Sonic orifices
KS I ISO 6145-2:2007 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 2:Volumetric pumps
KS I ISO 6145-9:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 9:Saturation method
KS I ISO 6145-1:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 1:Methods of calibration
KS I ISO 6145-1:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS I ISO 6145-2:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 2：Volumetric pumps
KS I ISO 6145-9:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 9：Saturation method
KS B ISO 8778-2003(2018) Pneumatic fluid power－Standard reference atmosphere
KS M 1059-2010(2020) Phosphine (Standard reference gas)
KS W 0636-1992 Flight Dynamics-Concepts, Quantities and Symbols-Part 1 : Aircraft Motion Relative to the Air
KS I ISO 6145-8:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 8:Diffusion method
KS I ISO 6145-8:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 8：Diffusion method
KS I ISO 6145-5:2010 Gas analysis-Preparation of calibraion gas mixtures using dynamic volumetric methods-Part 5:Capillary calibration devices
KS I ISO 6145-5:2015 Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices

Taiwan Provincial Standard of the People's Republic of China, standard gas state

CNS 2828-1996 Standard Atmospheres for Conditioning and Testing of Plastics
CNS 2395-1986 Standard Atmospheric Conditions for Testing
CNS 1351-2005 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples

Association Francaise de Normalisation, standard gas state

NF Q03-010*NF EN 20187:1993 Paper, board and pupls. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples.
NF X20-203*NF EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method.
NF X20-205-10*NF EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10 : permeation method
NF X20-211:1983 Gas analysis. Preparation of calibration gas mixtures. Mass dynamic method.
NF EN ISO 6144:2006 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage - Méthode volumétrique statique
NF E90-600:1985 Mechanical vibrations and shocks. Balancing criteria of rotors in a rigid state.
NF X20-204:1974 Gas analysis. Method for the dynamic preparation of gas mixtures for calibration by proportioning piston pumps.
NF EN 15852:2010 Qualité de l'air ambiant - Méthode normalisée pour la détermination du mercure gazeux total
NF X20-205-5*NF EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5 : capillary calibration devices
NF X20-205-9*NF EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9 : saturation method
NF X43-351*NF EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury.
NF X20-205-8*NF EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8 : diffusion method.
NF E49-301*NF ISO 8778:2018 Pneumatic fluid power - Standard reference atmosphere
NF X20-205-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6 : critical orifices.
NF X20-205-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1 : methods of calibration.
NF X20-205-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7 : thermal mass-flow controllers.

Japanese Industrial Standards Committee (JISC), standard gas state

JIS K 7100:1981 Standard atmospheres for conditioning and testing of plastics
JIS C 0502:1987 Standard conditions for operation in service of low-voltage switchgear and fuses
JIS K 0005:1992 Oxygen (standard reference gas)
JIS K 0005:1998 Reference material -- Standard gas -- Oxygen
JIS K 0006:1992 Methane (standard reference gas)
JIS K 0007:1992 Propane (standard reference gas)
JIS K 0006:1998 Reference material -- Standard gas -- Methane
JIS K 0007:1998 Reference material -- Standard gas -- Propane
JIS K 0001:1992 Nitrogen monoxide (standard reference gas)
JIS K 0002:1992 Carbon monoxide (standard reference gas)
JIS K 0003:1992 Carbon dioxide (standard reference gas)
JIS K 0004:1992 Sulfur dioxide (standard reference gas)
JIS B 8393:2000 Pneumatic fluid power -- Standard reference atmosphere
JIS K 0040:1990 Arsine (standard reference gas)
JIS K 0041:1990 Phosphine (standard reference gas)

CZ-CSN, standard gas state

CSN ISO 7395:1993 Gas analysis. Preparation of calibration gas mixtures. Masss dynamic method
CSN ISO 6144:1993 Gas analysis. Preparation of calibration gas mixtures. Static volumetric methods
CSN ISO 6145-1:1994 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods
CSN 38 5551-1987 Gaseous fuels. Certificate of calibration gas mixture
CSN ISO 6145/4:1993 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 4: Continuous injection method
CSN ISO 6145-3:1994 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 3: Periodic injections into a flowing gas stream
CSN 01 0601-1984 Dependabilíty engíneering. Technical objects. Rules for determining criteria of failures and limiting states.

American Society for Testing and Materials (ASTM), standard gas state

ASTM E171-94(2007) Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
ASTM E171-94(1998) Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
ASTM E171-94(2002) Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
ASTM E3338-22 Standard Guide for Size and Shape of Solid Particles, Liquid Droplets, and Gas Bubbles, Dynamically Conveyed, Using a Dynamic Imaging Analyzer
ASTM D7542-21 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
ASTM E2413-04 Standard Guide for Hospital Preparedness and Response
ASTM E2413-04(2009) Standard Guide for Hospital Preparedness and Response
ASTM F2091-01(2006) Standard Specification for Acetabular Prostheses
ASTM F2091-01 Standard Specification for Acetabular Prostheses
ASTM C1143-89(1994)e1 Standard Specification for Helium for Use as a Cover Gas for Liquid Sodium (Withdrawn 2000)
ASTM D1686-96(2004) Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM D1686-96(2000) Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM D1686-96 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM D1686-19 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM F1372-93(2005) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2012) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D3623-78a(2004) Standard Test Method for Testing Antifouling Panels in Shallow Submergence
ASTM G189-07 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
ASTM G189-07(2013) Standard Guide for Laboratory Simulation of Corrosion Under Insulation
ASTM D3623-78a(2012) Standard Test Method for Testing Antifouling Panels in Shallow Submergence
ASTM B609M-97 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes [Metric] (Withdrawn 1999)
ASTM F1359-99a(2004) Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin
ASTM F1359-99a Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin
ASTM D3801-06 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM F1755M-96(2018) Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
ASTM D5169-98(2015) Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
ASTM D3268-91(2005) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
ASTM E725-96(2012) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM D4150-20a Standard Terminology Relating to Gaseous Fuels
ASTM D4150-20 Standard Terminology Relating to Gaseous Fuels
ASTM D4150-19 Standard Terminology Relating to Gaseous Fuels
ASTM E1674-99 Standard Test Method for Cardiac Sensitization Study on Dogs
ASTM E1674-99(2003) Standard Test Method for Cardiac Sensitization Study on Dogs
ASTM E727/E727M-08(2013) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E1517-13 Standard Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human Louse Ova
ASTM F754-00 Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Polymer Fabricated in Sheet, Tube, and Rod Shapes
ASTM G147-02 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
ASTM E728-91(2009) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
ASTM C1367-06 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM C1367-06(2012) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM E1746-08 Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
ASTM E1521-14 Standard Test Method for Liquid Holding Capacity of Granular Carriers
ASTM E726-01(2021) Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM F1375-92(2012) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D1686-10 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM D3266-91(2005) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM F1792-97(2010) Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ASTM D8294-21 Standard Practice for Estimating pH to Verify Status of Aqueous Samples
ASTM C1703-08 Standard Practice for Sampling of Gaseous Uranium Hexafluoride
ASTM G147-09 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
ASTM C1740-10 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
ASTM D3924-80(2005) Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
ASTM D3924-80(1996) Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
ASTM D3924-80(2011) Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
ASTM E726-01(2011)e1 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM E726-01(2015) Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM D3366-18 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
ASTM D5169-98 Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
ASTM D5169-98(2004) Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
ASTM E2567-13 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
ASTM D1042-06 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
ASTM E2841-11 Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions
ASTM D5727-00 Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
ASTM D5727-00(2004)e1 Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
ASTM D5727/D5727M-00(2011)e1 Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
ASTM D6332-99(2005) Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D6332-99 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D6332-12(2021) Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D6332-12 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D6332-12(2017) Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM C1703-08(2013) Standard Practice for Sampling of Gaseous Uranium Hexafluoride
ASTM E2567-13a Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
ASTM E2567-14 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
ASTM E2567-11 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
ASTM D2864-17 Standard Terminology Relating to Electrical Insulating Liquids and Gases
ASTM D2864-17a Standard Terminology Relating to Electrical Insulating Liquids and Gases
ASTM F1359-07 Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin
ASTM D7833-20 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
ASTM E908-98(2004) Standard Practice for Calibrating Gaseous Reference Leaks
ASTM E908-98 Standard Practice for Calibrating Gaseous Reference Leaks
ASTM D4905-99(2004) Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
ASTM D4905-99 Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
ASTM D4905-99(2009) Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
ASTM E725-96(2020) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM C357-07 Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM E725-96 Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM E725-96(2001) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM C357-07(2022) Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM E725-96(2021) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM C357-07(2022)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM C1252-03 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
ASTM C1252-06 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, standard gas state

GB/T 10627-1989 Gas analysis--Preparation of calibration gas mixtures--Static volumetric methods
GB/T 10248-1988 Gas analysis--Preparation of calibration gas mixtures--Static volumetric methods
GB/T 10248-2005 Gas analysis.Preparation of calibration gas mixtures.Static volumetric methods
GB/T 2918-1998 Plastics--Standard atmospheres for conditioning and testing
GB/T 2918-2018 Standard environment for conditioning and testing of plastic specimens
GB/T 12373-1990 Standard sampling equipments of liquid absorbent methods for determining gaseous pollutants in air of residential areas
GB/T 5275.1-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 1:Methods of calibration
GB/T 5275.5-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 5:Capillary calibration devices
GB/T 5275.10-2009 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 10:Permeation method
GB/T 5275.2-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 2:Volumetric pumps
GB/T 5275.8-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 8:Diffusion method
GB/T 5275.9-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 9:Saturation method
GB/T 5275.2-2022 Gas analysis—Preparation of calibration gas mixtures using dynamic methods—Part 2: Piston pumps
GB/T 5275.6-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 6:Gritical orifices
GB/T 5275.4-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 4:Continuous syringe injection method
GB/T 5275.11-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 11:Electrochemical generation
GB/T 5275.6-2023 Preparation of gas mixtures for calibration by dynamic method of gas analysis - Part 6: Critical flow orifice
GB/T 5275.7-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 7:Thermal mass-flow controllers

European Committee for Standardization (CEN), standard gas state

EN 62:1977 Glass Reinforced Plastics: Standard Atmospheres for Conditioning and Testing
EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
EN ISO 6145-1:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury
EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
EN ISO 6145-9:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
EN ISO 6145-5:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)

Professional Standard - Aerospace, standard gas state

QJ 1570.4-1989 Classification standard for instrumentation technical status

Guangdong Provincial Standard of the People's Republic of China, standard gas state

DB44/T 2224-2020 Data Standards for Forest Resources and Ecological Status
DB44/T 1800-2016 Urban Ecological Meteorological Observation Index System

GOSTR, standard gas state

GOST R 8.976-2019 State system for ensuring the uniformity of measurements. Certified reference materials of composition of gas mixtures. General specifications
GOST R 8.938-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Liquid and gaseous propane. Thermodynamic properties, dynamic viscosity and thermal conductivity at temperature from 86 К up to 700 K and pressure up to
GOST R 8.974-2019 State system for ensuring the uniformity of measurements. Gas analysis. Conversion of gas mixture composition data
GOST R 8.993-2020 State system for ensuring the uniformity of measurements. General requirements for measuring the flow and volume of gas
GOST R 8.975-2019 State system for ensuring the uniformity of measurements. Permeation tubes for gases and vapors. General specifications
GOST R 8.977-2019 State system for ensuring the uniformity of measurements. Hardness standard blocks. Verification procedure
GOST R 8.771-2011 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. The method of verification
GOST R 8.968-2019 State system for ensuring the uniformity of measurements. Alarm only apparatus for determination of combustible gases and vapors. Verification procedure

CU-NC, standard gas state

NC 93-00-004-1987 Standards System for Environment Protection. Environment's State. General Criteria for its Evaluation

UNKNOWN, standard gas state

CN-QIYE, standard gas state

Q/GDW 448-2010

Professional Standard - Electricity, standard gas state

DL/T 1688-2017 Guidelines for condition evaluation of gas-insulated metal-enclosed switchgear
DL/T 1689-2017 Guidelines for condition maintenance of gas insulated metal-enclosed switchgear

Group Standards of the People's Republic of China, standard gas state

T/GZYJNY 01-2019 ecological agricultural product （ecological food ingredients）
T/GZYJNY 01-2018 Group standards for ecological agricultural products (ecological ingredients)
T/GXFSJHS 001-2018 Love-Eco products standard
T/CI 070-2023 Standard dataset establishment for diagnosis and treatment of status epilepticus
T/QAS 002-2019 Photovoltaic module test method under on-site standard state of photovoltaic power station
T/CI 086-2023 Technical standards on assessment of unsafe behaviour and status of seafarers on duty (deck department)
T/ACCIA 0031-2021 Adolescents' healthy posture training and assessment standards
T/SEEPLA 01-2022 Guidelines for the preparation of ecological environment group standards in Sichuan Province
T/CAS 765-2023 Recognition standards for knowledge system of eco-environmental cases

RU-GOST R, standard gas state

GOST R ISO 6144-2008 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
GOST 12.4.284.2-2014 Occupational safety standards system. Protective clothing against liquid and gaseous chemicals. Technical requirements and test methods
GOST R 12.4.259-2011 Occupational safety standards system. Ventilated and non-ventilated ?gas-tight? (Type 1) and ?non-gas-tight? (Type 2) chemical protective suits. Technical requirements
GOST R 12.4.271-2012 Occupational safety standards system. Insulating suits. Method of definition of protection coefficient for gaseous substances
GOST 8.047-1980 State system for ensuring the uniformity of measurements. State special standard for a unit of power
GOST R EN 464-2007 Occupational safety standards system. Protective clothing for use against liquid and gaseous chemicals, including aerosols and solid particles. Method for determination of leak-tightness of gas-tight suits
GOST R 12.4.256-2011 Occupational safety standards system. Protective clothing against toxic chemicals in the form of gas and vapours. Technical requirements and test methods
GOST 12.2.052-1981 Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements
GOST 8.143-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of gas within the range of 1x10 in minus 6 up to 1x10 in 2 degree m3/s
GOST 8.427-1981 State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers. Methods and means of calibration

British Standards Institution (BSI), standard gas state

BS 8401:2003 Health informatics standards.Status as of July 2001. Guide
BS EN ISO 6145-1:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration
BS EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Methods of calibration
BS EN ISO 6144:2003 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
BS EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
BS EN ISO 6145-10:2002 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Permeation method
BS EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Permeation method
BS EN ISO 6145-6:2003 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Critical orifices
BS EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Critical orifices
BS ISO 6145-2:2014 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Piston pumps
BS EN ISO 6145-8:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Diffusion method
BS EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Diffusion method
BS EN ISO 6145-9:2009 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Saturation method
BS EN ISO 6145-9:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Saturation method
BS EN ISO 6145-1:2019 Gas analysis. Preparation of calibration gas mixtures using dynamic methods - General aspects
PD CEN ISO/TR 24094:2007 Analysis of natural gas. Validation methods for gaseous reference materials
BS EN ISO 6145-5:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Capillary calibration devices
BS ISO 6145-2:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Volumetric pumps
BS EN ISO 6145-11:2006 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Electrochemical generation
BS EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11:Electrochemical generation
BS EN ISO 6145-6:2017 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Critical flow orifices
BS EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury
BS EN ISO 6145-4:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Continuous syringe injection method
BS EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Continuous syringe injection method
BS ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Thermal mass-flow controllers
BS EN ISO 6145-7:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
BS EN IEC 62343-1:2019 Tracked Changes. Dynamic modules. Performance standards. General conditions

American National Standards Institute （ANSI), standard gas state

ANSI/IEEE 1616:2004 Standard for Motor Vehicle Event Data Recorder (MVEDR)
ANSI/ASME AG-1-2012 Code on Nuclear Air and Gas Treatment
ANSI Z80.23-2008 Opthalmics - Corneal Topography Systems - Standard Terminology - Requirements
ANSI Z223.1/NFPA 54-2012 National Fuel Gas Code
ANSI/NFPA 54-2012 National Fuel Gas Code
CSA/ANSI/CSA/AM HGV 4.10:21-2021 Standard for fittings for use in compressed gaseous hydrogen fuelling stations (Second Edition)

Canadian Standards Association (CSA), standard gas state

CSA S408-2011 Guidelines for the development of limit states design standards (Second Edition)
CSA C510-2021 Ideal state benchmarking and application of benchmark energy factor for data centres

Underwriters Laboratories (UL), standard gas state

UL 879-1993 UL Standard for Safety Electrode Receptacles for Gas - Tube Signs (Sixth Edition)

Society of Automotive Engineers (SAE), standard gas state

SAE AS1248A-1992 Minimum Standard for Gaseous Oxygen Pressure Reducers
SAE AS1248A-2017 Minimum Standard for Gaseous Oxygen Pressure Reducers
SAE AS1248B-2020 Minimum Standard for Gaseous Oxygen Pressure Reducers
SAE AS1248A-1973 Minimum Standard for Gaseous Oxygen Pressure Reducers
SAE ARD50002-1992 A Discussion of Standardization Concepts for Condition Monitoring and Performance Analysis Software
SAE AS1376C-1992 ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD
SAE AS1376D-2013 ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD
SAE AS1376E-2018 ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD
SAE MA2023A-2015 ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD, METRIC
SAE MA2023-2011 WRENCH PAD, FLUID FITTING, ALTERNATE MACHINED SHAPES OF, DESIGN STANDARD FOR

Professional Standard - Agriculture, standard gas state

GB 2918-1982 Standard environment for conditioning and testing of plastic specimens

Association of German Mechanical Engineers, standard gas state

VDI 3490 Blatt 6-1988 Measurement of gases; calibration gas mixtures; dynamic; preparation by gas-mixing pumps
VDI 3490 Blatt 7-1980 Measurement of gases; calibration gas mixtures; dynamic method of preparation by periodic injection
VDI 3490 Blatt 14-1994 Measurement of gases - Calibration gas mixtures - Preparation of calibration gas mixtures by volumetric static method using glass vessels
VDI 3490 Blatt 16-1994 Measurement of gases - Calibration gas mixtures - Dynamic preparation with critical orifice systems
VDI 2468 Blatt 10-1995 Gaseous air pollution measurement - Preparation of hydrogen peroxide calibration - Gas mixtures
VDI 3490 Blatt 17-1998 Measurement of gases - Calibration gas mixtures - Dynamic preparation with thermal mass flow controllers

Qinghai Provincial Standard of the People's Republic of China, standard gas state

DB63/T 2053-2022 Meteorological guarantee service standard system for ecological construction and environmental protection
DB63/T 1383-2015 Meteorological Standard System Table
DB63/T 1383-2022 Meteorological Standard System Table

International Organization for Standardization (ISO), standard gas state

ISO 6145-10:2002 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
ISO 6144:2003 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
ISO 6144:1981 Gas analysis; Preparation of calibration gas mixtures; Static volumetric methods
ISO 6145-5:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
ISO/TR 24094:2006 Analysis of natural gas - Validation methods for gaseous reference materials
ISO 6145-2:2014 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 2: Piston pumps
ISO 7589:2002 Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer
ISO 2231:1989 Rubber- or plastics-coated fabrics; standard atmospheres for conditioning and testing
ISO 6145-6:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices
ISO 6145-9:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
ISO 6145-2:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 2: Volumetric pumps
ISO 6145-1:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
ISO 6145-9:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
ISO 6145-6:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 6 : Sonic orifices
ISO 6145-1:2019 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11: Electrochemical generation
ISO 6145-8:2005 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method
ISO 6145-1:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 1 : Methods of calibration
ISO 6145-5:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 6145-3:1986 Gas analysis — Preparation of calibration gas mixtures — Dynamic volumetric methods — Part 3: Periodic injections into a flowing gas stream

Liaoning Provincial Standard of the People's Republic of China, standard gas state

DB21/T 3137-2019 Standards for cryopreservation of jellyfish polyps

Danish Standards Foundation, standard gas state

DS/EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
DS/CEN ISO/TR 24094:2008 Analysis of natural gas - Validation methods for gaseous reference materials
Standardpakke Drivhusgasser-2008 Standards package - Greenhouse gases
DS/EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
DS/EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
DS/EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices
DS/EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
DS/EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury
DS/EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
DS/EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
DS/EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method

未注明发布机构, standard gas state

BS EN ISO 6144:2006(2007) Gas analysis — Preparation of calibration gas mixtures — Static volumetric method
BS 8401:2003(2008) Health informatics standards — Status as of July 2001 — Guide
BS PD CEN ISO/TR 24094:2007 Analysis of natural gas — Validation methods for gaseous reference materials
BS EN ISO 6145-8:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 8 : Diffusion method
BS EN ISO 6145-10:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10 : Permeation method

中华人民共和国国家卫生和计划生育委员会, standard gas state

GB 12373-1990 Standard sampling device for liquid absorption method of gaseous pollutants in the atmosphere of residential areas

Professional Standard - Post and Telecommunication, standard gas state

YDN 121-1999 Technical specifications for SDH network synchronous state information (internal standard)

ETSI - European Telecommunications Standards Institute, standard gas state

TR 102 806-2009 User Group; Analysis of current End-to-End QoS standardization state (V1.1.1)

Institute of Electrical and Electronics Engineers (IEEE), standard gas state

ST 273:2003 ST 273:2003 - SMPTE Standard - For Television — Status Monitoring and Diagnostics Protocol
SMPTE ST 273:2003 ST 273:2003 - SMPTE Standard - For Television — Status Monitoring and Diagnostics Protocol
IEEE Std 216-1960 IRE Standards on Solid-State Devices: Definitions of Semiconductor Terms
IEEE 216*61 IRE 28 S1 IEEE Standards on Solid-State Devices: Definitions of Semiconductor Terms 1960
IEEE/ISO/IEC 13213-1994 ISO/IEC/IEEE International Standard for Information technology--Microprocessor systems--Control and Status Registers (CSR) Architecture for microcomputer buses
IEEE P62582-3/FDIS, September 2012 Standard for Nuclear Power Plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break

Lithuanian Standards Office , standard gas state

LST EN ISO 6144:2007 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
LST EN 15852-2010 Ambient air quality - Standard method for the determination of total gaseous mercury
LST EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
LST EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
LST EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
LST EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
LST EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)

AENOR, standard gas state

UNE-EN ISO 6144:2007 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
UNE 77243-2:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 2: Volumetric pumps
UNE-EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury
UNE-EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
UNE-EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
UNE-EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
UNE-EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
UNE-EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)

European Association of Aerospace Industries, standard gas state

AECMA PREN 2672-1989 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Design of Rigid Lines Issue P 1
AECMA PREN 2671-1988 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition; Outline and Terms Edition P 1
AECMA PREN 2673-1990 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition, Rigid Lines - Manufacture Edition P 1

(U.S.) Ford Automotive Standards, standard gas state

FORD WSS-M2A169-A-2006 ALUMINUM CASTING ALLOY, ENGINE CYLINDER HEAD, AS-CAST CONDITION ***TO BE USED WITH FORD WSS-M99P1111-A***

BE-NBN, standard gas state

NBN 349-1954
NBN 350-1954
NBN T 97-110-1983 Gas analysis - Preparation of calibration gas mixtures - Static volumetric methods

PL-PKN, standard gas state

PN C04759 ArkusZ00-1973 Gaseous fuels Methods of the analysis of fuels and combustion gases General resolutions and maintenance of standard

Professional Standard - Public Safety Standards, standard gas state

GA/T 760.6-2008 The classification and code for standard management information of the public security.Part 6: Code for standard states

ES-UNE, standard gas state

UNE-CEN ISO/TR 24094:2012 IN Analysis of natural gas - Validation methods for gaseous reference materials (ISO/TR 24094:2006)
UNE-EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)

Aerospace, Security and Defence Industries Association of Europe (ASD), standard gas state

ASD-STAN TR 2674-1997 Serie Aerospatiale Conception Et Realisation Des Tuyauteries Pour Fluides Liquides Ou Gazeux Tuyauteries Rigides, Installation (Edition 1)
ASD-STAN PREN 2671-1988 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition; Outline and Terms (Edition P 1)
ASD-STAN PREN 2672-1989 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Design of Rigid Lines (Issue P 1)
ASD-STAN PREN 2673-1990 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition, Rigid Lines - Manufacture (Edition P 1)
ASD-STAN TR 2678-2001 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Design of Rigid Lines

Military Standards (MIL-STD), standard gas state

DOD A-A-54199-1990 CALIBRATING GAS MIXTURE

KR-KS, standard gas state

KS I ISO 6145-10-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
KS I ISO 6145-9-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
KS B ISO 8778-2003(2023) Pneumatic fluid power－Standard reference atmosphere
KS F 2371-2022 Standard test method for bulk density of granular insulations

Compressed Gas Association (U.S.), standard gas state

CGA V-9-2012 Compressed gas association standard for compressed gas cylinder valves
CGA P-6-2012 Standard density data, atmospheric gases and hydrogen
CGA M-8-2011 Guideline for the manufacturer of calibration gas standards used to analyze medical gases

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., standard gas state

IEEE 216-1960 STANDARDS ON SOLID STATE DEVICES: DEFINITIONS OF SEMICONDUCTOR TERMS
IEEE C37.122-1983 STANDARD FOR GAS- INSULATED SUBSTATIONS
IEEE 859-1987 Standard Terms for Reporting and Analyzing Outage Occurrences and Outage States of Electrical Transmission Facilities

Professional Standard - Electron, standard gas state

SJ 1267-1977 Thermal resistance measurements of sinks for semiconductor devices under natural air cooling conditions

Indonesia Standards, standard gas state

SNI 01-7239-2006 Standard shape of purse seiner trawl ship construction 75 GT - 150 GT

International Telecommunication Union (ITU), standard gas state

ITU-R PN.835-1-1994 Reference Standard Atmosphere for Gaseous Attenuation

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, standard gas state

ITU-R PN.835-1992 Reference Standard Atmosphere for Gaseous Attenuation

Professional Standard - Machinery, standard gas state

JB/T 6853-1993 Calibration mixed gas cylinder color code
JB/T 1811-1992 Standard compressed-air capacitor
JB/T 1811-2011 Compressed gas standard capacitors

Professional Standard - Civil Aviation, standard gas state

MH/T 0052.1-2015 Guide to civil aviation information system security situation assessment.Part 1: Index system

Shandong Provincial Standard of the People's Republic of China, standard gas state

DB37/T 5075-2016 Ecological integrated toilet purification treatment technical standard

RO-ASRO, standard gas state

STAS SR ISO 8778:1995 Pneumatic fluid power - Standard reference atmosphere

National Metrological Technical Specifications of the People's Republic of China, standard gas state

JJF 1344-2023 Production of Gas Reference Materials

机械工业部, standard gas state

JB 1811-1992 Compressed gas standard capacitor

SAE - SAE International, standard gas state

SAE MA2023A-1996 ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD, METRIC