ZH
RU
ES

Spectral Analysis and Measurement

Spectral Analysis and Measurement, Total:500 items.

In the international standard classification, Spectral Analysis and Measurement involves: Special measuring equipment for use in telecommunications, Fibre optic communications, Non-ferrous metals, Particle size analysis. Sieving, Metalliferous minerals, Analytical chemistry, Beverages, Electronic components in general, Fertilizers, Vocabularies, Corrosion of metals, Optics and optical measurements, Coals, Fuels, Testing of metals, Milk and milk products, Animal feeding stuffs, Inorganic chemicals, Ferrous metals, Ferroalloys, Solar energy engineering, General methods of tests and analysis for food products, Soil quality. Pedology, Water quality, Insulating fluids, Products of the textile industry, Non-metalliferous minerals, Products of the chemical industry, Thermodynamics and temperature measurements, Medical sciences and health care facilities in general, Products of non-ferrous metals, METALLURGY, Electricity. Magnetism. Electrical and magnetic measurements, Iron and steel products, Wind turbine systems and other alternative sources of energy, Power stations in general, Natural gas, Environmental protection, Nuclear energy engineering, Surface treatment and coating, Paints and varnishes, Acoustics and acoustic measurements, Wood-based panels, Lubricants, industrial oils and related products, Welding, brazing and soldering.

British Standards Institution (BSI), Spectral Analysis and Measurement

BS EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments. Optical spectrum analyzers
BS ISO 22489:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
BS ISO 22489:2016 Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
BS EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
BS DD ISO/TS 9941:2006 Milk and canned evaporated milk - Determination of tin content - Spectrometric method
BS 5766-3:1999 Methods for analysis of animal feeding stuffs. Determination of phosphorus content (spectrometic method)
BS EN 61724:1998 Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis
BS EN 61280-1-1:1998 Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable
BS EN ISO 15192:2021 Soil and waste. Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
BS ISO 17560:2002 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon
BS ISO 17560:2014 Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of boron in silicon
BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
DD 220-1994 Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method
BS EN ISO 10700:1995 Steel and iron - Determination of manganese content - Flame atomic absorption spectrometric method
BS ISO 11505:2012 Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
BS 3908-2:1967 Methods for the sampling and analysis of lead and lead alloys - Arsenic in lead and lead alloys (photometric method)
BS 3908-6:1971 Methods for the sampling and analysis of lead and lead alloys - Tellurium in lead and lead alloys (photometric method)
BS 7020-9.1:1989 Analysis of iron ores - Methods for the determination of manganese content - Spectrophotometric method
BS 1728-15:1966 Methods for the analysis of aluminium and aluminium alloys - Determination of nickel (photometric method)
BS 1728-16:1968 Methods for the analysis of aluminium and aluminium alloys - Determination of chromium (photometric method)
BS 7020-10.2:1988 Analysis of iron ores - Methods for the determination of copper content - Flame atomic absorption spectrometric method
BS 3908-13:1970 Methods for the sampling and analysis of lead and lead alloys - Antimony in lead and lead alloys (low contents) (photometric method)
BS 7020-11.2:1993 Analysis of iron ores. Methods for the determination of vanadium content. Flame atomic absorption spectrometric method
BS 7020 Sec.8.2:1993 Analysis of iron ores. Methods for the determination of aluminium content. Flame atomic absorption spectrometric method
BS ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
BS 7020-15:1993 Analysis of iron ores - Methods for the determination of calcium content: flame atomic absorption spectrometric method
BS 7020-18:1993 Analysis of iron ores - Methods for the determination of magnesium content: flame atomic absorption spectrometric method
BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 14701:2011 Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
BS 6200-3.7.1:1987 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of calcium - Steel: flame atomic absorption spectrometric method
BS 6200-3.16.4:1987 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of lead - Steel: flame atomic absorption spectrometric method
BS 770-6:1984 Methods for chemical analysis of cheese - Determination of total phosphorus content - Molecular absorption spectrometric method
BS EN ISO 23674:2022 Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
BS PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings

RU-GOST R, Spectral Analysis and Measurement

GOST 1367.1-1983 Antimony. Spectral method for the determination of impurities without preliminary concentration
GOST 30508-1997 Lead concentrates. Method of spectrum analysis
GOST R 51430-1999 Fruit and vegetable juices. Spectrophotometric method for determination of phosphorus content
GOST 20461-1975 Gaseous helium. Method for determination of impurities volume fraction by emission spectral analysis
GOST 31870-2012 Drinking water. Determination of elements content by atomic spectrometry methods
GOST 12645.8-1982 Indium. Method of chemical and spectral analysis for the determination of tin
GOST R ISO 7530-2-2016 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 2. Determination of cobalt content
GOST R ISO 7530-3-2016 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 3. Determination of chromium content
GOST R ISO 7530-9-2017 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 9. Determination of vanadium content
GOST 33405-2015 Testing of chemicals of environmental hazard. Determination of the UV-VIS absorption spectral by spectrophotometric method
GOST R 50279.3-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" lead content. Flame atomic absorption spectrometric method and dithizone spectrophotometric method
GOST R 50279.4-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" antimony content. Flame atomic absorption spectrometric method and rhodamine B spectrophotometric method

Association Francaise de Normalisation, Spectral Analysis and Measurement

NF X11-672:1996 Particle size analysis. Photon correlation spectroscopy.
NF X21-003:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry.
NF EN 62129-1:2016 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 1 : analyseurs de spectre optique
NF C93-846-1*NF EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1 : optical spectrum analyzers
NF X21-006:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy.
NF U44-145:1984 FERTILIZERS AND SOILS CONDITIONERS. DETERMINATION OF MAGNESIUM BY ATOMIC ABSORPTION SPECTROMETRIC METHOD.
NF X21-002:2007 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy.
NF V03-003:2001 Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy
NF V03-003:1997 FOODSTUFFS. DETECTION OF IRRADIATED FOOD CONTAINING CELLULOSE. METHOD BY ESR SPECTROSCOPY. (EUROPEAN STANDARD EN 1787).
NF X31-171:2011 Soil quality - Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection.
NF C93-845-2*NF EN 62150-2:2011 Fibre optic active components and devices - Test and measurement procedures - Part 2 : ATM-PON transceivers.
NF A08-344:1996 Steel and iron. Determination of vanadium content. Flame atomic absorption spectrometric method.
NF A06-653:1993 Chemical analysis of titanium and titanium alloys. Determination of iron content. Molecular absorption spectrometry method.
NF A08-709:1983 Chemical analysis of copper alloys. Determination of antimony content. Atomic absorption spectrometry method.
NF A08-341:1987 Chemical analysis of steel. Determination of silicon content. Flame atomic absorption spectrometric method.
NF A08-309:2018 Chemical analysis of steels - Determination of molybdenum content - Flame atomic absorption spectrometric method
NF EN ISO 23913:2009 Qualité de l'eau - Dosage du chrome(VI) - Méthode par analyse en flux (FIA et CFA) et détection spectrométrique
NF X21-013*NF ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy.
NF A08-908*NF ISO 7530-8:2007 Nickel alloys - Flame atomic absorption spectrometric analysis - Part 8 : determination of silicon content.
NF A08-909*NF ISO 7530-9:2007 Nickel alloys - Flame atomic absorption spectrometric analysis - Part 9 : determination of vanadium content
NF A08-902:1991 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 2 : determination of cobalt content.
NF EN 13615:2002 Méthodes pour l'analyse des lingots d'étain - Détermination des teneurs en impuretés dans l'étain de qualité 99,90 % et 99,85 % par spectrométrie atomique
NF ISO 4735:2002 Huiles essentielles de Citrus - Détermination de la valeur CD par analyse spectrométrique dans l'ultraviolet
NF A08-903:1991 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 3 : determination of chromium content.
NF A08-904:1991 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 4 : determination of copper content.
NF A08-905:1991 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 5 : determination of iron content.
NF A08-906:1991 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 6 : determination of manganese content.
NF X21-061:2008 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution.
NF T90-053*NF EN ISO 16264:2004 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection

Standard Association of Australia （SAA）, Spectral Analysis and Measurement

AS 2917.2:1994 Copper sulfide concentrates Part 2: Determination of gold and silver contents - Fire assay gravimetric and atomic absorption spectrometric method
AS 3587.6:1998 Ferroalloys - Chemical analysis - Determination of phosphorus content- Spectrophotometric method
AS 2134.2:1999 Recommended practice for chemical analysis by atomic absorption spectrometry - Graphite furnace spectrometry
AS/NZS 1050.8:1994 Methods for the analysis of iron and steel - Determination of manganese content (spectrophotometric method)
AS/NZS 1050.21:1994 Methods for the analysis of iron and steel - Determination of cobalt content (spectrophotometric method)
AS/NZS 1050.24:1994 Methods for the analysis of iron and steel - Determination of aluminium content (spectrophotometric method)
AS/NZS 1050.27:1994 Methods for the analysis of iron and steel - Determination of titanium content (spectrophotometric method)
AS/NZS 1050.20:1994 Methods for the analysis of iron and steel - Determination of magnesium content (flame atomic absorption spectrometric method)
AS 1050.23:1990 Methods for the analysis of iron and steel - Determination of molybdenum content - Flame atomic absorption spectrometric method
AS 1050.25:1986 Methods for the analysis of iron and steel - Determination of lead content (flame atomic absorption spectrometric method)
AS 1050.29:1989 Methods for the analysis of iron and steel - Determination of cobalt content - Flame atomic absorption spectrometric method
AS 1050.33:1988 Methods for the analysis of iron and steel - Determination of nickel content - Flame atomic absorption spectrometric method
AS/NZS 1050.6:1995 Methods for the analysis of iron and steel - Determination of tin content - Flame atomic absorption spectrometric method
AS/NZS 1050.38:1994 Methods for the analysis of iron and steel - Determination of vanadium content - Flame atomic absorption spectrometric method
AS/NZS 1050.37:1994 Methods for the analysis of iron and steel - Determination of copper content - Flame atomic absorption spectrometric method
AS/NZS 1050.39:1994 Methods for the analysis of iron and steel - Determination of chromium content - Flame atomic absorption spectrometric method

SE-SIS, Spectral Analysis and Measurement

SIS SS IEC 714:1983 Electronic measurement equipment - Expression of the properties of spectrum analyzers
SIS SS-EN 24 943-1991 Chemical analysis of ferrous metal — Deter- mination of copper content — Flame atomic absorption spectrometric method

International Organization for Standardization (ISO), Spectral Analysis and Measurement

ISO 22489:2006 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
ISO 22489:2016 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
ISO 22309:2006 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS)
ISO 15192:2010 Soil quality - Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
ISO 15192:2021 Soil and waste - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
ISO 17470:2004 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 22309:2011 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
ISO 17470:2014 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 7530-3:1990 Nickel alloys — Flame atomic absorption spectrometric analysisPart 3:Determination of chromium content
ISO/FDIS 2612:2023 Analysis of natural gas — Biomethane — Determination of ammonia content by tuneable diode laser absorption spectroscopy
ISO 14701:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness
ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
ISO 16962:2005 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
ISO 12460-3:2020/DAmd 1 Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method — Amendment 1: Laser spectroscopy
ISO/DIS 2612 Analysis of natural gas — Biomethane — Determination of ammonia content by Tuneable Diode Laser Absorption Spectroscopy
ISO/TS 25138:2010 Surface chemical analysis - Analysis of metal oxide films by glow-discharge optical-emission spectrometry
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 14701:2011 Surface chemical analysis - X-ray photoelectron spectroscopy - Measurement of silicon oxide thickness

Korean Agency for Technology and Standards (KATS), Spectral Analysis and Measurement

KS D ISO 22489:2012 Microbeam analysis－Electron probe microanalysis－Quantitative point analysis for bulk specimens using wavelength-dispersive x-ray spectroscopy
KS D ISO 3816:2011 Zinc ingots－Selection and preparation of samples for spectrographic analysis
KS D ISO 22309-2011(2016) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D ISO 22309-2011(2021) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D 1680-2008 General rules for photographic emission spectrochemical analysis of metal materials
KS C 6918-1995(2020) Test methods of fiber-optic spectrum analyzer
KS D ISO 10700:2008 Steel and iron-Determination of manganese content-Flame atomic absorption spectrometric method
KS D ISO 9647:2002 Steel and iron?Determination of vanadium content — Flame atomic absorption spectrometric method
KS D ISO 14594:2018 Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
KS D ISO 3817:2011 Zinc alloy ingots－Selection and preparation of samples for spectrographic analysis
KS D ISO 22309:2011 Microbeam analysis-Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D ISO 7530-8:2012 Nickel alloys－Flame atomic absorption spectrometric analysis－Part 8：Determination of silicon content
KS D ISO 7530-7:2012 Nickel alloys－Flame atomic absorption spectrometric analysis－Part 7：Determination of aluminium content
KS D ISO 7530-4-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 4：Determination of copper content
KS D ISO 9388-2012(2017) Nickel alloys－Determination of phosphorus content－Molybdenum blue molecular absorption spectrometric method
KS D ISO 9388-2012(2022) Nickel alloys－Determination of phosphorus content－Molybdenum blue molecular absorption spectrometric method
KS D ISO 7530-2-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 2：Determination of cobalt content
KS D ISO 7530-9-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 9：Determination of vanadium content
KS D ISO 7530-7-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 7：Determination of aluminium content
KS D ISO 7530-6-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 6：Determination of manganese content
KS D ISO 7530-3-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 3：Determination of chromium content
KS D ISO 7530-8-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 8：Determination of silicon content
KS D ISO 11652-2002(2022) Steel and iron－Determination of cobalt content－Flame atomic absorption spectrometric method
KS D ISO 7520-2012(2017) Ferronickel－Determination of cobalt content－Flame atomic absorption spectrometric method
KS D ISO 11652-2002(2017) Steel and iron－Determination of cobalt content－Flame atomic absorption spectrometric method
KS D ISO 10138-2002(2017) Steel and iron－Determination of chromium content－Flame atomic absorption spectrometric method
KS D ISO 10138-2002(2022) Steel and iron－Determination of chromium content－Flame atomic absorption spectrometric method
KS D ISO 7530-2:2012 Nickel alloys-Flame atomic absorption spectrometric analysis-Part 2:Determination of cobalt content
KS D ISO 7530-4:2012 Nickel alloys-Flame atomic absorption spectrometric analysis-Part 4:Determination of copper content
KS D ISO 7530-3:2012 Nickel alloys－Flame atomic absorption spectrometric analysis－Part 3：Determination of chromium content
KS D ISO 7530-5:2012 Nickel alloys－Flame atomic absorption spectrometric analysis－Part 5：Determination of iron content
KS D ISO 7530-6:2012 Nickel alloys－Flame atomic absorption spectrometric analysis－Part 6：Determination of manganese content
KS D ISO 7530-9:2012 Nickel alloys-Flame atomic absorption spectrometric analysis-Part 9:Determination of vanadium content
KS D ISO 7530-4-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 4：Determination of copper content
KS D ISO 7530-6-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 6：Determination of manganese content
KS D ISO 7530-9-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 9：Determination of vanadium content
KS D ISO 7530-7-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 7：Determination of aluminium content
KS D ISO 7530-8-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 8：Determination of silicon content
KS D ISO 7530-2-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 2：Determination of cobalt content
KS D ISO 7530-5-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 5：Determination of iron content
KS D ISO 7530-5-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 5：Determination of iron content
KS D ISO 7530-3-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 3：Determination of chromium content
KS D 1655-2008(2019) Method for X-ray fluorescence spectrometric analysis of iron and steel
KS D 1673-2007 Methods for inductively coupled plasma emission spectrochemical analysis of steel
KS E ISO 9208:2001 Aluminium ores－Determination of vanadium content－BPHA spectrophotometric method
KS D ISO 5960-2012(2017) Copper alloys－Determination of cadmium content－Flame atomic absorption spectrometric method
KS D ISO 4194-2002(2017) Magnesium alloys－Determination of zinc content－Flame atomic absorption spectrometric method
KS D ISO 5960-2012(2022) Copper alloys－Determination of cadmium content－Flame atomic absorption spectrometric method
KS D ISO 4693-2002(2007) Iron ores－Determination of copper content－Flame atomic absorption spectrometric method
KS D ISO 3750-2012(2022) Zinc alloys－Determination of magnesium content－Flame atomic absorption spectrometric method
KS D ISO 4194-2002(2022) Magnesium alloys－Determination of zinc content－Flame atomic absorption spectrometric method
KS D ISO 3750-2012(2017) Zinc alloys－Determination of magnesium content－Flame atomic absorption spectrometric method
KS D ISO 22489:2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS D ISO 3815-1:2006 Zinc and zinc alloys-Part 1:Analysis of solid samples by optical emission spectrometry
KS D 1686-2011(2016) Method for x-ray fluorescence spectrometric analysis of ferroalloys
KS D ISO 15472:2003 Surface chemical analysis-X-ray photoelectron spectrometers-Calibration of energy scales
KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
KS D ISO 4943-2002(2017) Steel and cast iron－Determination of copper content－Flame atomic absorption spectrometric method
KS D ISO 4940-2002(2017) Steel and cast iron－Determination of nickel content－Flame atomic absorption spectrometric method

Professional Standard - Aviation, Spectral Analysis and Measurement

HB 6731.2-1993 Determination of Magnesium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 5219.11-1998 Chemical Analysis Methods of Magnesium Alloys - Determination of Nickel Content by Atomic Absorption Spectrometry
HB 5219.13-1998 Magnesium Alloy Chemical Analysis Methods Atomic Absorption Spectroscopic Analysis Determination of Zinc Content
HB 5219.20-1998 Methods of chemical analysis of magnesium alloys - Determination of silver content by atomic absorption spectrometry
HB 5219.3-1998 Methods of chemical analysis of magnesium alloys - Determination of copper content by atomic absorption spectrometry
HB 5219.8-1998 Methods of chemical analysis of magnesium alloys - Determination of manganese content by atomic absorption spectrometry
HB 5219.5-1998 Methods of chemical analysis of magnesium alloys - Determination of iron content by atomic absorption spectrometry
HB 7716.10-2002 Spectrometric analysis of titanium alloys Part 10:Determination of trace manganese content-Flame atomic absorption spectrometric method
HB 7716.8-2002 Spectrometric analysis of titanium alloys Part 8:Determination of trace copper content-Flame atomic absorption spectrometric method
HB 7716.5-2002 Spectrometric analysis of titanium alloys Part 5:Determination of trace molybdenum content-Flame atomic absorption spectrometric method
HB 6731.1-1993 Determination of Copper Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.9-1993 Determination of Chromium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.4-1993 Determination of Lead Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.5-1993 Determination of Cadmium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.6-1993 Determination of Iron Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.7-1993 Determination of Manganese Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.8-1993 Determination of Nickel Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.10-1993 Determination of Vanadium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.3-1993 Determination of Zinc Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.1-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 1:Determination of copper content by flame atomic absorption spectrometric method
HB 6731.2-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 2:Determination of magnesium content by flame atomic absorption spectrometric method
HB 6731.3-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 1:Determination of zinc content by flame atomic absorption spectrometric method
HB 6731.4-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 4:Determination of lead content by flame atomic absorption spectrometric method
HB 6731.5-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 5:Determination of cadmium content by flame atomic absorption spectrometric method
HB 6731.6-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 6:Determination of iron content by flame atomic absorption spectrometric method
HB 6731.7-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 7:Determination of manganese content by flame atomic absorption spectrometric method
HB 6731.8-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 8:Determination of nickel content by flame atomic absorption spectrometric method
HB 6731.9-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 9:Determination of chrome content by flame atomic absorption spectrometric method
HB 7716.7-2002 Spectrometric analysis of titanium alloys Part 7:Determination of copper content-Flame atomic absorption spectrometric method
HB 7716.9-2002 Spectrometric analysis of titanium alloys Part 9:Determination of manganese content-Flame atomic absorption spectrometric method
HB 7716.11-2002 Spectrometric analysis of titanium alloys Part 11:Determination of iron content-Flame atomic absorption spectrometric method
HB 7716.12-2002 Spectrometric analysis of titanium alloys Part 12:Determination of silicon content-Flame atomic absorption spectrometric method
HB 7716.1-2002 Spectrometric analysis of titanium alloys Part 1:Determination of aluminum content-Flame atomic absorption spectrometric method
HB 7716.2-2002 Spectrometric analysis of titanium alloys Part 2:Determination of vanadium content-Flame atomic absorption spectrometric method
HB 7716.3-2002 Spectrometric analysis of titanium alloys Part 3:Determination of chromium content-Flame atomic absorption spectrometric method
HB 7716.4-2002 Spectrometric analysis of titanium alloys Part 4:Determination of molybdenum content-Flame atomic absorption spectrometric method
HB 7716.6-2002 Spectrometric analysis of titanium alloys Part 6:Determination of tin content-Flame atomic absorption spectrometric method
HB 7716.14-2002 Spectrometric analysis of titanium alloys Part 14:Determination of yttrium content-Inductively coupled plasma atomic emission spectrometric method
HB/Z 5088.6-1999 Analytical method of electroplating nickel solution Determination of copper content by atomic absorption spectrometry
HB/Z 5091.5-1999 Analysis method for chrome plating solution Determination of ferrous content through atomic absorption spectrometry
HB/Z 5091.6-1999 Analysis method for chrome plating solution Determination of copper content through atomic absorption spectrometry
HB/Z 5088.5-1999 Analysis method for nickel plating solution Determination of ferrous content through atomic absorption spectrometry
HB 7266.2-1996 Analytical method for chemical composition of aluminum-lithium alloy Determination of lithium content by atomic absorption spectrometry
HB 7266.4-1996 Analytical methods for chemical composition of aluminum-lithium alloys Determination of iron content by atomic absorption spectrometry
HB 7266.5-1996 Analytical method of chemical composition of aluminum-lithium alloy Determination of copper content by atomic absorption spectrometry
HB 7266.6-1996 Analytical method for chemical composition of aluminum-lithium alloy Determination of magnesium content by atomic absorption spectrometry
HB 6731.11-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 10:Determination of copper,magnesium,zink,cadmium,iron,manganese,boron,titanium, zirconium,nickel,chrome content by inductivel coupled plasma atomic spectrometric method
HB 6731.12-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 10:Determination of silicon content by inductivel coupled plasma atomic spectrometric method
HB 7716.17-2022 Spectral analysis method of chemical composition of titanium alloys Part 17: Determination of boron content by inductively coupled plasma atomic emission spectrometry
HB 7716.18-2022 Spectrometric analysis of titanium alloys – Part 18：Determination of lithium, lead content –Inductively coupled plasma atomic emission spectrometric method
HB 7716.16-2022 Spectrometric analysis of titanium alloys – Part 16：Determination of platinum, palladium content –Inductively coupled plasma atomic emission spectrometric method

Professional Standard - Non-ferrous Metal, Spectral Analysis and Measurement

YS/T 536.7-2009 Methods for chemical analysis of bismuth.Determination of arsenic content.Atomic fluorescence spectrometric method
YS/T 536.11-2009 Methods for chemical analysis of bismuth.Determination of mercury content.Atomic fluorescence spectrometric method
YS/T 555.4-2009 Methods for chemical analysis of molybdenum concentrate.Determination of tin content.Atomic fluorescence spectrometry
YS/T 35.3-1992 Determination of Bismuth by Emission Spectrometry by Chemical Analysis Method of High Purity Antimony
YS/T 872-2013 Methods for chemical analysis gallium.Determination of mercury in industrial gallium.Atomic fluorescence spectrometer method
YS/T 74.10-1994 Methods of chemical analysis of cadmium-Flame atomic absorption spectrometry for determination of silver content
YS/T 555.3-2009 Methods for chemical analysis of molybdenum concentrate.Determination of arsenic conten.Atomic fluorescence spectrometry
YS/T 710.4-2009 Method for chemical analysis of cobalt oxide.Part 4:Determination of arsenic content.Atomic fluorescence spectrometry
YS/T 556.7-2009 Methods for chemical analysis of antimony concentrates.Part 7:Determination of mercury content.Atomic fluorescence spectrometry
YS/T 229.2-2013 Methods for chemical analysis of high pure lead.Part 2:Determination of arsenic content.Atomic fluorescence spectrometry
YS/T 229.3-2013 Methods for chemical analysis of high pure lead.Part 3:Determination of antimony content.Atomic fluorescence spectrometry
YS/T 74.4-1994 Methods for chemical analysis of cadmium - Determination of lead content by flame atomic absorption spectrometry
YS/T 74.6-1994 Methods for chemical analysis of cadmium - Determination of zinc content by flame atomic absorption spectrometry
YS/T 536.4-2006 Methods of chemical analysis of bismuth - Determination of silver content by flame atomic absorption spectrometry
YS/T 536.6-2006 Bismuth Chemical Analysis Method Electrothermal Atomic Absorption Spectrometry Determination of Lead
YS/T 536.12-2006 Bismuth Chemical Analysis Method Electrothermal Atomic Absorption Spectrometry Determination of Nickel Content
YS/T 703-2014 Method for chemical analysis of Limstone.Determination of element contents.X-ray fluorescence spectrometric method
YS/T 273.14-2008 Chemical analysis methods and determination of physical performance of synthetic cryolite.Part 14: X-ray fluorescence spectrometric method for the determination of elements content
YS/T 581.10-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 10:Determination of sulphur content by X-ray fluorescence spectrometric method
YS/T 273.11-2006 Chemical analysis methods and physical properties of cryolite. Part 11:Determination of sulphur content by X-ray fluorescence spectrometric method
YS/T 461.6-2003 The methods for chemical analysis of lead and zinc bulk concentrates-The determination of mercury content-The atomic fluorescence spectrometry method
YS/T 536.2-2009 Methods for chemical analysis of bismuth.Determination of iron content.Electrothermal atomic absorption spectrometric method
YS/T 536.6-2009 Methods for chemical analysis of bismuth.Determination of lead content.Electrothermal atomic absorption spectrometric method
YS/T 536.12-2009 Methods for chemical analysis of bismuth.Determination of nickel content.Electrothermal atomic absorption spectrometric method
YS/T 536.13-2009 Methods for chemical analysis of bismuth.Determination of cadmium content.Electrothermal atomic absorption spectrometric method
YS/T 536.11-2006 Method for chemical analysis of bismuth Determination of mercury by cold vapor atomic absorption spectrometry
YS/T 536.13-2006 Bismuth Chemical Analysis Method Electrothermal Atomic Absorption Spectrometry Determination of Silver and Cadmium
YS/T 536.4-2009 Methods for chemical analysis of bismuth.Determination of silver content.Flame atomic absorption spectrophotmetric method and electrothermal atomic absorption spectrometric method
YS/T 581.16-2008 Chemical analysis methods and determination of physical performance of industrial aluminium fluoride.Part 16: X-ray fluorescence spectrometric method for the determination of elements content
YS/T 575.23-2009 Method for chemical analysis of aluminum ores.Part 23:Determination of element contents X-ray fluorescence spectrometric method
YS/T 226.1-2009 Methods for chemical analysis of selenium.Part 1:Determination of bismuth content.Hydride generation-atomic fluorescence spectrometry
YS/T 226.2-2009 Methods for chemical analysis of selenium.Part 2:Determination of antimony content-Hydride generation-atomic fluorescence spectrometry
YS/T 74.1-2010 Methods for chemical analysis of cadmium- Part 1: Determination of arsenic content- Hydride generation-atomic fluorescence spectrometry
YS/T 74.2-2010 Methods for chemical analysis of cadmium- Part 2: Determination of antimony content- Hydride generation-atomic fluorescence spectrometry
YS/T 227.1-2010 Methods for chemical analysis of tellurium-Part 1: Determination of bismuth content-Hydride generation-atomic fluorescence spectrometry
YS/T 227.10-2010 Methods for chemical analysis of tellurium-Part 10: Determination of arsenic content- Hydride generation-atomic fluorescence spectrometry
YS/T 74.9-2010 Mehtods for chemical analysis of cadmium- Part 9:Determination of tin content- Hydride generation-atomic fluorescence spectrometry
YS/T 461.6-2013 Methods for chemical analysis of lead and zinc bulk concentrates.Part 6:The determination of mercury content.Atomic fluorescence spectrometry
YS/T 276.1-2011 Methods for chemical analysis of indium.Part 1:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry
YS/T 1605.5-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 5: Determination of antimony content— Atomic fluorescence spectrometry
YS/T 1605.4-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 4: Determination of tin content— Atomic fluorescence spectrometry
YS/T 1605.3-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 3: Determination of bismuth content— Flame atomic absorption spectrometry and atomic fluorescence spectrometry
YS/T 248.3-2007 Methods for chemical analysis of crude lead.Determination of antimony content.Flame atomic absorption spectrometric method
YS/T 248.5-2007 Methods for chemical analysis of crude lead.Determination of copper content.Flame atomic absorption spectrometric method
YS/T 248.7-2007 Methods for chemical analysis of crude lead.Determination of silver content.Flame atomic 'absorption spectrometric method
YS/T 248.8-2007 Methods for chemical analysis of crude lead.Determination of zinc content.Flame atomic absorption spectrometric method
YS/T 248.9-2007 Methods for chemical analysis of crude lead.Determination of bismuth content.Flame atomic absorption spectrometric method
YS/T 248.10-2007 Methods for chemical analysis of crude lead.Determination of iron content.Flame atomic absorption spectrometric method
YS/T 38.2-1992 High-purity gallium chemical analysis method Determination of manganese, magnesium, chromium and zinc content by chemical spectroscopy
YS/T 38.3-1992 High-purity Gallium Chemical Analysis Method Chemical Spectrometry Determination of Lead, Nickel, Tin and Copper
YS/T 520.12-2006 Gallium chemical analysis method Determination of lead, copper, nickel, aluminum, indium and zinc content by chemical spectroscopy
YS/T 990.4-2014 Methods for chemical analysis of copper matte.Part 4:Determination of bismuth content.Atomic absorption spectrometry
YS/T 990.7-2014 Methods for chemical analysis of copper matte.Part 7:Determination of cadmium content.Atomic absorption spectrometry
YS/T 990.11-2014 Methods for chemical analysis of copper matte.Part 11:Determination of nickel content.Atomic absorption spectrmetry
YS/T 990.15-2014 Methods for chemical analysis of copper matte.Part 15:Determination of antimony content.Atomic absorption spectrometry
YS/T 520.10-2007 Chemical analysis of gallium.Part 10:Determination of zinc content.The atomic absorption spectral method
YS/T 581.18-2012 Chemical analysis methods and physical properties of Aluminum Fluoride.Part 18:X-ray fluorescence spectrometric method for the determination of elements content using pressed powder tablets
YS/T 273.15-2012 Chemical analysis methods and physical properties of cryolite.Part 15:X-ray fluorescence spectrometric method for the determination of elements content using pressed powder tablets
YS/T 63.16-2006 Carbonaceous materials used in the production of aluminium-Part 16:Analysis using an X-ray fluorescence method
YS/T 555.9-2009 Methods for chemical analysis of molybdenum concentrate.Determination of potassium and sodium content.Flame atomic absorption spectrometry
YS/T 341.2-2006 Methods for chemical analysis of nickel concentrates-Determination of copper content-Flame atomic absorption spectrometric method
YS/T 252.3-2007 Methods for chemical analysis of nickel matte.Determination of cobalt content.Flame atomic absorption spectrometric method
YS/T 240.11-2007 Methods for chemical analysis of bismuth concentrate.Determination of silver content.Flame atomic absorption spectrometric method
YS/T 575.13-2006 Methods of chemical analysis of bauxite ore - Determination of zinc content by flame atomic absorption spectrometry
YS/T 990.16-2014 Methods for chemical analysis of copper matte.Part 16:Determination of mercury content.Cold atomic absorption spectrometry
YS/T 520.11-2007 Chemical analysis of gallium.Part 11:Determination of zinc content.The cold vapor atomic absorption spectral method
YS/T 226.7-2009 Methods for chemical analysis of selenium.Part 7:Determination of magnesium content.Flame atomic absorption spectrometry
YS/T 226.8-2009 Methods for chemical analysis of selenium.Part 8:Determination of copper content.Flame atomic absorption spectrometry
YS/T 226.9-2009 Methods for chemical analysis of selenium.Part 9:Determination of iron content.Flame atomic absorption spectrometry
YS/T 226.10-2009 Methods for chemical analysis of selenium.Part 10:Determination of nickel content.Flame atomic absorption spectrometry
YS/T 226.11-2009 Methods for chemical analysis of selenium.Part 11:Determination of lead content.Flame atomic absorption spectrometry
YS/T 74.3-2010 Methods for chemical analysis of cadmium- Part 3: Determination of nickel content- Electrothermal atomic absorption spectrometric method

European Committee for Electrotechnical Standardization（CENELEC）, Spectral Analysis and Measurement

EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
EN 61724:1998 Photovoltaic System Performance Monitoring Guidelines for Measurement, Data Exchange and Analysis

ES-UNE, Spectral Analysis and Measurement

UNE-EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers (Endorsed by AENOR in July of 2016.)
UNE-EN 12938:1999 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry

American Society for Testing and Materials (ASTM), Spectral Analysis and Measurement

ASTM E168-92 Standard Practice for General Techniques of Infrared Quantitative Analysis
ASTM E1097-97 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
ASTM E10-08 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E10-15 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E415-99a Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel

Professional Standard - Electron, Spectral Analysis and Measurement

SJ/Z 3206.11-1989 General rules for analysis of quantities of emision spectrum

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Spectral Analysis and Measurement

GB/T 32198-2015 General Rules for Quantitative Analysis Techniques of Infrared Spectroscopy
GB/T 29858-2013 Standard guidelines for molecular spectroscopy multivariate calibration quantitative analysis
GB/T 8151.15-2005 Methods for chemical analysis of zinc concentrates-Determination of mercury content-Atomic fluorescence spectrometry method
GB/T 8152.11-2006 Methods for chemical analysis of lead concentrates. Determination of mercury content. Atomic fluorescence spectrometer method
GB/T 8152.5-2006 Methods for chemical analysis of lead concentrates. Determination of arsenic content. Atomic fluorescence spectrometer method
GB/T 17416.2-1998 Method for chemical analysis of Zirconium ores.Determination of Zirconium and Hafnium contents.X-ray fluorescence spectrometric method
GB/T 4325.3-2013 Methods for chemical analysis of molybdenum.Part 3:Determination of bismuth content.Atomic fluorescence spectrometry
GB/T 4325.4-2013 Methods for chemical analysis of molybdenum.Part 4:Determination of tin content.Atomic fluorescence spectrometry
GB/T 4325.5-2013 Methods for chemical analysis of molybdenum.Part 5:Determination of antimony content.Atomic fluorescence spectrometry
GB/T 4325.6-2013 Methods for chemical analysis of molybdenum.Part 6:Determination of arsenic content.Atomic fluorescence spectrometry
GB/T 8156.10-1987 Aluminium fluoride for industrial use--Determination of sulphur content--X-ray fluorescence spectrometric method
GB/T 4333.8-1988 Methods for chemical analysis of ferrosilicon--The atomic absorption spectrometric method for the determination of calcium content
GB/T 12689.2-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of arsenic content-The atomic fluorescence spectrometer method
GB/T 7999-2000 Standard method for direct reading spectromertric analysis of aluminum and its alloys
GB/T 8220.6-1998 Methods for chemical analysis of bismuth--Determination of lead content--Electrothermal atomic absorption spectrometric method
GB/T 8220.12-1998 Methods for chemical analysis of bismuth--Determination of nickel content--Electrothermal atomic absorption spectrometric method
GB/T 8220.4-1998 Methods for chemical analysis of bismuth--Determination of silver content--Flame atomic absorption spectrophotometric method
GB/T 11066.2-1989 Gold--Determination of silver content--Flame atomic absorption spectometric method
GB/T 13747.20-1992 Zirconium and zirconium alloys--Determination of hafnium content--Emission spectrographic method
GB/T 7603-1987 Determination of the aromatic carbon content in mineral insulating oils by infrared spectrum method
GB/T 11066.3-1989 Gold--Determination of iron content--Flame atomic absorption spectrometric method
GB/T 14849.10-2016 Methods for chemical analysis of industrial silicon - Part 10: Determination of mercury content by atomic fluorescence spectrometry
GB/T 6150.17-2022 Methods for chemical analysis of tungsten concentrates—Part 17：Determination of antimony content—Atomic fluorescence spectrometry
GB/T 12689.9-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of antimony content-The atomic fluorescence spectrometer and the flame atomic absorption spectrometric method
GB/T 3253.6-2008 Methods for chemical analysis of antimony and antimony trioxide.Determination of selenium content.Atomic fluorenscence spectrophotometric method
GB/T 3253.10-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of mercury content.Atomic fluorescence spectrometric method
GB/T 3253.7-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of bismuth content.Atomic fluorescence spectrometric method
GB/T 8220.11-1998 Methods for chemical analysis of bismuth--Determination of mercury content--Cold vapour atomic absorption spectrometric method
GB/T 8220.13-1998 Methods for chemical analysis of bismuth--Determination of silver and cadmium content--Electrothermal atomic absorption spectrometric method
GB/T 11066.2-2008 Methods for chemical analysis of gold.Determination of silver content.Flame atomic absorption spectrometry
GB/T 11066.3-2008 Methods for chemical analysis of gold.Determination of iron content.Flame atomic absorption spectrometry
GB/T 8647.2-2006 The methods for chemical analysis of nickel. Determination of aluminium content. Electrothermal atomic absorption spectrometric method
GB/T 8647.5-2006 The methods for chemical analysis of nickel. Determination of magnesium content. Flame atomic absorption spectrometric method
GB/T 11067.2-2006 Methods for chemical analysis of silver. Determination of copper contents. Flame atomic absorption spectrometric method
GB/T 11067.6-2006 Methods for chemical analysis of silver. Determination of iron contents. Flame atomic absorption spectrometric method
GB/T 20931.1-2007 Methods for chemical analysis of lithium Determination of potassium content Flame atomic absorption spectrometric method
GB/T 20931.10-2007 Methods for chemical analysis of lithium Determination of copper content Flame atomic absorption spectrometric method
GB/T 20931.11-2007 Methods for chemical analysis of lithium Determination of magnesium content Flame atomic absorption spectrometric method
GB/T 20931.2-2007 Methods for chemical analysis of lithium Determination of sodium content Flame atomic absorption spectrometric method
GB/T 20931.3-2007 Methods for chemical analysis of lithium Determinationof calcium content Flame atomic absorption spectrometric method
GB/T 4333.9-1988 Methods for chemical analysis of ferrosilicon--The flame atomic absorption spectrometric method for the determination of aluminium content
GB/T 15249.5-1994 Crude Gold-Determination of mercury content-Cold atomic absorption spectrometric method
GB/T 7731.15-1999 Methods for chemical analysis of ferrotungsten-The flame atomic absorption spectrometric method for the determination of copper content
GB/T 7731.16-1999 Methods for chemical analysis of ferrotungsten-The flame atomic absorption spectrometric method for the determination of manganese content
GB/T 23364.1-2009 Methods for chemical analysis of high purity indium oxide.Part 1:Determination of arsenic content.Atomic fluorescence spectrometry
GB/T 23364.3-2009 Methods for chemical analysis of high purity indium oxide.Part 3:Determination of antimony content.Atomic fluorescenece spectrometry
GB/T 6150.7-2008 Methods for chemical analysis of tungsten concentrates.Determination of tantalum content and niobium content.Inductively coupled plasma emission spectrometry and spectrophotometry
GB/T 13748.21-2009 Chemical analysis methods of magnesium and magnesium alloys.Part 21:Determination of elements by photoelectric direct reading atomic emission spectrometry
GB/T 6150.13-2022 Methods for chemical analysis of tungsten concentrates—Part 13：Determination of arsenic content—Atomic fluorescence spectrometry and the silver diethyldithiocarbamate（DDTC-Ag）spectrophotometry
GB/T 23362.1-2009 Methods for chemical analysis of high purity indium hydroxide.Part 1:Determination of arsenic content.Atomic fluorescence spectrometry
GB/T 23362.3-2009 Methods for chemical analysis of high purity indium hydroxide.Part 3:Determination of antimony content.Atomic fluorescene spectrometry
GB/T 14849.5-2010 Chemical analysis of slion metal.Part 5: Determination of elements content.Analysis using an X-ray fluorescence method
GB/T 14506.28-1993 Silicate rocks. Determination of contents of major and minor elements. X-ray fluorescence spectrometric method
GB/T 11066.9-2009 Methods for chemical analysis of gold.Determination for arsenic and tin contents.Hydride generation-atomic fluorescence spectrometry
GB/T 11067.2-1989 Silver--Determination of copper and gold contents--Flame atomic absorption spectrometric method
GB/T 11067.7-1989 Silver--Determination of copper, bismuth, iron, lead, gold and antimony contents--Emission spectrometric method
GB/T 11066.5-1989 Gold--Determination of silver, copper, lead, and bismuth contents--Emission spectrographic method
GB/T 4375.12-1984 Methods for chemical analysis of gallium--The spectrochemical method for the determination of lead,copper,nickel,aluminum,indium and zinc content
GB/T 3884.11-2005 Methods for chemical analysis of copper concentrates-Determination of mercury content-Cold atomic absorption spectrometric method
GB/T 1819.17-2006 Methods for chemical analysis of tin concentrates. Determination of mercury content. The cold vapor atomic absorption spectrometric method
GB 11067.2-1989 Silver—Determination of copper and gold contents—Flame atomic absorption spectrometric method
GB/T 6150.13-2008 Methods for chemical analysis of tungsten concentrates.Determination of arsenic content.Hydride reduction atomic absorption spectrometry and the silver diethyldithiocarbamate(DDTC-Ag) photometry
GB/T 1819.6-2004 Methods for chemical analysis of tin concentrates Determination of antimony content-The malachite green spectrometric method and the flame atomic absorption spectrometric method
GB/T 3257.13-1999 Methods for chemical analysis of bauxite--Determination of zinc content--Flame atomic absorption spectrophotometric method
GB/T 6150.11-2008 Methods for chemical analysis of tungsten concentrates.Determination of zinc content.Flame atomic absorption spectrometric method
GB/T 10574.10-1989 Tin-lead solders--Determination of zinc content--Flame atomic absorption spectrophotometric method
GB/T 10574.8-1989 Tin-lead solders--Determination of silver content--Flame atomic absorption spectrophotometric method
GB/T 11067.3-1989 Silver--Determination of iron, lead and bismuth contents--Flame atomic absorption spectrometric method
GB/T 1819.7-2004 Methods for chemical analysis of tin concentrates Determination of bismuth content-Flame atomic absorption spectrometric method
GB/T 1819.8-2004 Methods for chemical analysis of tin concentrates Determination of zinc content-Flame atomicabsorption spectrometric method
GB/T 8151.16-2005 Methods for chemical analysis of zinc concentrates-Determination of cobalt content-Flame atomic absorption spectrometer method
GB/T 1819.14-2006 Methods for chemical analysis of tin concentrates. Determination of copper content. Flame atomic absorption spectrometric method
GB/T 1819.16-2006 Methods for chemical analysis of tin concentrates. Determination of silver content. Flame atomic absoption spectrometric method
GB/T 11067.5-2006 Methods for chemical analysis of silver. Determination of lead and bismuth contents. Flame atomic absorption spectrometric method
GB/T 6150.9-2009 Methods for chemical analysis of tungsten concentrates.Determination of copper content.Flame atomic absorption spectrometry
GB/T 8152.12-2006 Methods for chemical analysis of lead concentrates. Determination of cadmium content. Flame atomic absorption spectrometric method
GB/T 8152.7-2006 Methods for chemical analysis of lead concentrates. Determination of copper content. Flame atomic absorption spectrometric method
GB 11067.3-1989 Silver—Determination of iron,lead and bismuth contents—Flame atomic absorption spectrometric method
GB/T 4372.5-2001 Methods for chemical analysis of zinc oxide produced by direct process--Determination of zinc oxide manganese content--Atomic absorption spectrometry method
GB/T 6150.10-2008 Methods for chemical analysis of tungsten concentrates.Determination of lead content.Flame atomic absorption spectrometric method
GB/T 6150.15-2008 Methods for chemical analysis of tungsten concentrates.Determination of bismuth content.Flame atomic absorption spectrometric method
GB/T 3260.3-2013 Methods for chemical analysis of tin.Part 3:Determination of bismuth content.KI photometric method and flame atomic absorption spectrometric method
GB/T 4325.8-2013 Methods for chemical analysis of molybdenum.Part 8:Determination of cobalt content.5-CI-PADAB spectrophotometry and flame atomic absorption spectrometry
GB/T 6150.10-2023 Methods of chemical analysis of tungsten concentrates - Part 10: Determination of lead content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
GB/T 6150.15-2023 Methods for chemical analysis of tungsten concentrates - Part 15: Determination of bismuth content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
GB/T 23278.4-2009 Methods for chemical analysis of sodium stannate.Part 4:Determination of lead content.Flame atomic absorption spectrometry

YU-JUS, Spectral Analysis and Measurement

JUS C.A1.650-1987 Methodes of chemical analysis of silver. Determination of impurities contents. Spectrographic metod".
JUS C.A1.237-1990 Methods for chemical analysis of cadmium. Determination of silver content. Flame atomic absorption spectrometric method
JUS C.A1.235-1990 Metbods for cbemical aualysis of cadmium. Determination of copper content. Flame atomic absorption svectrometric metbo?
JUS C.A1.236-1990 Hethods for chemical saalysis of cadmium. Determination of lead content. Fla?e atomic absorption spectrometric method
JUS C.A1.238-1990 Metha?s for chemical analysis of cadmium. Determination of zine content. Flame atomic absorption spectroinetric method
JUS C.A1.360-1977 Methods for chemical analysis of zine and zine alloys. Determination of group of elements - spectrographic analysis
JUS C.A1.263-1981 Methods for chemical analysis of aluminium and aluminium alloys. Determination of zine content b\ atomic absorption spectrophotometry
JUS C.A1.363-1982 Methods for chemical analysis of zinc and zinc alloys. Determination of cadmium by atomic absorpti-on spectrophotometry
JUS C.A1.362-1982 Methods for chemical analysis of zinc and zinc alloys. Determination of lead by atomic absorption spec-trophotometry
JUS C.A1.364-1982 Methods for chemical analysis of zinc and zinc alloys. Determination of copper by atomic absorption spec troph o tometry
JUS C.A1.622-1985 Method for chemical analysis of copper and copper alloys. Determination of chromivm by atomic absorption spectrophotometry
JUS C.A1.264-1978 Methods for chemical analysis oj alummtum and ahtmintum alloys. Determination ofcopper by atomic absorption

International Electrotechnical Commission (IEC), Spectral Analysis and Measurement

IEC 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
IEC 61290-2-1:1998 Optical fibre amplifiers - Basic specification - Part 2-1: Test methods for optical power parameters - Optical spectrum analyzer

ZA-SANS, Spectral Analysis and Measurement

SANS 412:2006 Coal and coke - Analysis and testing - Determination of trace elements - Determination of boron content - ICP-AES method

CZ-CSN, Spectral Analysis and Measurement

CSN 42 0600 Cast.3-1975 Antimony of high parity. Methods of chemical and spectral analysis. Delermmation of arsenic by photomotric metod
CSN 35 6535-1983 Electronic measuring instruments. Succesive process spectra analyzers. Nomenclature of pnrameters
CSN 42 0600 Cast.5-1975 Antimony of high purity. Methods of chemical and spectral analysis. Dctermination of silver, bismuth. copper, iron. nickel, lead. and tin by spectral method

工业和信息化部, Spectral Analysis and Measurement

YS/T 1033-2015 Determination of element content of dry anti-seepage materials by X-ray fluorescence spectrometry
YS/T 1381-2020 Methods for chemical analysis of rhodium compounds - Determination of arsenic content Atomic fluorescence spectrometry
YS/T 1341.7-2019 Methods of chemical analysis of crude zinc Part 7: Determination of antimony content Atomic fluorescence spectrometry
YS/T 1341.8-2019 Methods of chemical analysis of crude zinc Part 8: Determination of tin content Atomic fluorescence spectrometry
YS/T 1341.6-2019 Methods of chemical analysis of crude zinc Part 6: Determination of arsenic content by atomic fluorescence spectrometry
YS/T 445.13-2019 Methods of chemical analysis of silver concentrates Part 13: Determination of mercury content by atomic fluorescence spectrometry
YS/T 1171.8-2017 Methods for chemical analysis of recycled zinc raw materials Part 8: Determination of mercury content by atomic fluorescence spectrometry and cold atomic absorption spectrometry
YS/T 1171.7-2017 Methods for chemical analysis of recycled zinc raw materials Part 7: Determination of arsenic and antimony amounts Atomic fluorescence spectrometry
YS/T 806-2020 Chemical analysis methods for aluminum and aluminum alloys Determination of elemental content X-ray fluorescence spectrometry
YS/T 990.17-2015 Methods for chemical analysis of matte Part 17: Determination of cobalt content Atomic absorption spectrometry
YS/T 581.15-2012 Methods for chemical analysis and determination of physical properties of aluminum fluoride Part 15: Determination of elemental content by X-ray fluorescence spectrometry (tablet pressing) method
YS/T 575.23-2021 Methods of chemical analysis of bauxite ores Part 23: Determination of elemental content X-ray fluorescence spectrometry
YS/T 445.10-2019 Methods of chemical analysis of silver concentrates Part 10: Determination of antimony content Hydride generation-atomic fluorescence spectrometry and flame atomic absorption spectrometry
YS/T 3015.6-2017 Methods for chemical analysis of gold-loaded carbon Part 6: Determination of mercury content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 3015.7-2017 Methods for chemical analysis of gold-loaded carbon Part 7: Determination of arsenic content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry

RO-ASRO, Spectral Analysis and Measurement

STAS 10274/19-1984 SOLID FUELS Ash analysis Spectrum quantitative determination of titanium, calcium, magnezium and manganese
STAS SR ISO 7530-4:1995 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 4; Determination of copper content
STAS SR ISO 7530-2:1995 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 2: Determination of cobalt content
STAS SR ISO 7530-3:1995 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 3: Determination of chromium content
STAS SR 11411-2-1998 Complex chemical fertilizers - Phosphorus content determination Spectrophotometry method
STAS SR ISO 11400:1996 Nickel, ferronickel and nickel alloys. Determination of phosphorus content. Phosphovanadomolybdate molecular absorption spectrometric method

Japanese Industrial Standards Committee (JISC), Spectral Analysis and Measurement

JIS H 1631:2008 Titanium alloys -- Method for X-ray fluorescence spectrometric analysis
JIS G 1256 AMD 1:2010 Iron and steel -- Method for X-ray fluorescence spectrometric analysis (Amendment 1)
JIS G 1351:2006 Ferroalloys -- Method of X-ray fluorescence spectrometric analysis
JIS K 0190:2010 Microbeam analysis -- Electron probe microanalysis -- Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
JIS H 1669:1990 Method for X-ray fluorescence spectrometric analysis of zirconium alloys
JIS G 1351:1987 Method for X-ray fluorescence spectrometric analysis of ferroalloys
JIS K 0150:2009 Surface chemical analysis -- Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry

Professional Standard - Geology, Spectral Analysis and Measurement

DZ/T 0064.81-2021 Methods of Analytical Groundwater Quality Part 81: Determination of Mercury Amounts by Atomic Fluorescence Spectrometry
DZ/T 0064.29-2021 Methods of analysis of groundwater quality - Part 29: Determination of lithium content by flame emission spectrometry
DZ/T 0064.39-2021 Analytical methods of groundwater quality - Part 39: Determination of strontium content by flame emission spectrometry
DZ/T 0064.11-2021 Analytical methods for groundwater quality - Part 11: Determination of arsenic content by hydride generation - atomic fluorescence spectrometry
DZ/T 0064.38-2021 Analytical methods for groundwater quality - Part 38: Determination of the amount of selenium by hydride generation - atomic fluorescence spectrometry

Taiwan Provincial Standard of the People's Republic of China, Spectral Analysis and Measurement

CNS 12013-1987 Method of Test for Lead in Gasoline by Atomic Absorption Spectrometry
CNS 10124-1983 Method for Determining Sulphur Content in Natural and Artificial Cryolite and Aluminium Fluoride for Industrial Use (X-Ray Fluorescence Spectrometric Method)
CNS 15119-2007 Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis

German Institute for Standardization, Spectral Analysis and Measurement

DIN EN ISO 10700:1996 Steel and iron - Determination of manganese content - Flame atomic absorption spectrometric method (ISO 10700:1994); German version EN ISO 10700:1995
DIN 51866-1:2000 Temperature measurement - Part 1: Survey of laser spectroscopic methods
DIN 51440-1:2003 Testing of gasolines - Determination of phosphorus content - Part 1: Analysis by wavelength dispersive X-ray spectrometry (XRS)
DIN 25711:1996 Determination of the <(hoch)232>U isotopic content in uranium containing nuclear fuel solutions by spectrometry
DIN ISO 22309:2015 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above (ISO 22309:2011)
DIN ISO 11505:2018-02 Surface chemical analysis - General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry (ISO 11505:2012)
DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
DIN EN 12938:2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry (includes AC:2000); German version EN 12938:1999 + AC:2000

European Committee for Standardization (CEN), Spectral Analysis and Measurement

EN ISO 15192:2021 Soil and waste - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection (ISO 15192:2021)
CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
EN ISO 10700:1995 Steel and Iron - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method (ISO 10700 : 1994)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Spectral Analysis and Measurement

GB/T 1819.17-2017 Methods for chemical analysis of tin concentrates—Part 17：Determination of mercury content—Atomic fluorescence spectrometric method
GB/T 32997-2016 Surface chemical analysis—General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry

KR-KS, Spectral Analysis and Measurement

KS D ISO 14594-2018 Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
KS D ISO 14594-2018(2023) Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
KS D ISO 5956-2008(2023) Copper and copper alloys－Determination of antimony content－Rhodamine B spectrometric method
KS D ISO 22489-2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Spectral Analysis and Measurement

ASHRAE 3858-1995 Duct Leakage Measurement and Analysis

Group Standards of the People's Republic of China, Spectral Analysis and Measurement

T/NAIA 0128-2022 Rapid Determination of Aluminum Hydroxide Determination of Element Content by X-ray Fluorescence Spectroscopic Analysis (Tablet)
T/ZFB 0050-2023 Textiles—Quantitative analysis of Polyester-cotton blended fabric—Hyperspectral method

Professional Standard - Textile, Spectral Analysis and Measurement

FZ/T 01144-2018 Near Infrared Spectroscopy for Quantitative Analysis of Textile Fibers

National Metrological Technical Specifications of the People's Republic of China, Spectral Analysis and Measurement

JJF 1133-2005 Calibration Specification of Gold Gauge Utilizing X-ray Fluorescence Spectrometry

工业和信息化部/国家能源局, Spectral Analysis and Measurement

JB/T 12962.2-2016 Energy dispersive X-ray fluorescence spectrometer Part 2: Elemental analyzers
JB/T 12962.3-2016 Energy dispersive X-ray fluorescence spectrometer Part 3: Coating thickness analyzer

VN-TCVN, Spectral Analysis and Measurement

TCVN 6061-2009 Beer.Determination of colour by spectrophotometric method
TCVN 1674-1-2009 Iron ores.Determination of vanadium.Prat1:BPHA spectrophotometric method

AT-ON, Spectral Analysis and Measurement

ONORM M 6238 Teil.1-1986 Water analysis; determination ofnitrate; 2,6-dimethylphenol spectrometric method
ONORM M 6603-2-1997 Water analysis - Determination of potassium and sodium by flame emission spectrometry
ONORM M 6603-1-1997 Water analysis - Determination of potassium and sodium by atomic absorption spectrometry

National Metrological Verification Regulations of the People's Republic of China, Spectral Analysis and Measurement

JJG 955-2000 Verification Regulation of Special Analysis Microdensitimeters

国家能源局, Spectral Analysis and Measurement

SY/T 7361-2017 Quadrupole mass spectrometry for rare gas separation and component content analysis

NL-NEN, Spectral Analysis and Measurement

NEN 6228-1985 Chemical analysis of iron and steel - Determination of the tin content in iron and steel by atomic absorption spectrometry
NEN 6214-1978 Chemical analysis of iron and steel - Determination of the magnesium content in iron by atomic absorption spectrometry
NEN 6214-1984 Chemical analysis of iron and steel - Determination of the magnesium content in iron by atomic absorption spectrometry

NO-SN, Spectral Analysis and Measurement

NS 4783-1988 Water analysis - Metal content of biological material determined by atomic absorption spectrometry

Association of German Mechanical Engineers, Spectral Analysis and Measurement

VDI/VDE/DGQ/DKD 2622 Blatt 11-2003 Calibration of measurement equipments for electrical quantities - Spectrum analyzers

Professional Standard - Electricity, Spectral Analysis and Measurement

DL/T 386-2010 Calibration for second derivative flame atomic emission spectrometer
DL/T 919-2005 Determination of mineral oil content in sulphur hexafluoride by infrared spectrum method

IT-UNI, Spectral Analysis and Measurement

UNI 7726-1977 Chemical analysis of ferrous materials. Determination of antimony in steel. Spectrophotometric method with brillant green.

GOSTR, Spectral Analysis and Measurement

GOST R 57987-2017 Polymer composites. Infrared spectroscopy. Multivariate quantitative analysis

Indonesia Standards, Spectral Analysis and Measurement

SNI 19-1654-1989 Weighted sound pressure level (weighted A), Measurement and analysis method

CN-STDBOOK, Spectral Analysis and Measurement

图书 A-4619 Material quality inspection and analysis technology

Professional Standard - Commodity Inspection, Spectral Analysis and Measurement

SN/T 2297.7-2015 Analysis method for gypsum and gysum products.Part 7:Determination of arsenic and mercury content.Atomic fluorescence spectrum

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Spectral Analysis and Measurement

GJB 5404.2-2005 Analysis methods for trace elements in super alloys. Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometric method
GJB 5404.9-2005 Analysis methods for trace elements in super alloys Part 9: Determination of antimony content by hydride generation atomic fluorescence spectrometric method
GJB 5404.12-2005 Analysis methods for trace elements in super alloys Part 12: Determination of tellurium content by hydride generation atomic fluorescence spectrometric method

Military Standard of the People's Republic of China-General Armament Department, Spectral Analysis and Measurement

GJB 8781.2-2015 Methods for trace element analysis of high-temperature alloys Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometry
GJB 8781.9-2015 Methods for trace element analysis of high-temperature alloys Part 9: Determination of antimony content by hydride generation-atomic fluorescence spectrometry
GJB 8781.12-2015 Methods for trace element analysis of high-temperature alloys Part 12: Determination of tellurium content by hydride generation-atomic fluorescence spectrometry
GJB 770.201-1989 Test methods for gunpowder analysis Determination of metal element content Atomic absorption spectrometry

Professional Standard - Rare Earth, Spectral Analysis and Measurement

XB/T 601.5-1993 Methods of chemical analysis of lanthanum hexaboride - Determination of manganese content by flame atomic absorption spectrometry
XB/T 601.2-1993 Methods of chemical analysis of lanthanum hexaboride - Determination of calcium content by flame atomic absorption spectrometry
XB/T 601.3-1993 Methods of chemical analysis of lanthanum hexaboride - Determination of magnesium content by flame atomic absorption spectrometry
XB/T 601.4-1993 Methods of chemical analysis of lanthanum hexaboride - Determination of copper content by flame atomic absorption spectrometry

Anhui Provincial Standard of the People's Republic of China, Spectral Analysis and Measurement

DB34/T 2879-2017 Methods for chemical analysis of copper slag tailings - Determination of copper content - Atomic absorption spectrometry