ZH
RU
ES

Spectroscopic Qualitative Analysis

Spectroscopic Qualitative Analysis, Total:500 items.

In the international standard classification, Spectroscopic Qualitative Analysis involves: Analytical chemistry, Non-ferrous metals, Optics and optical measurements, Electronic components in general, Standardization. General rules, Education, Ferrous metals, Fibre optic communications, Non-metalliferous minerals, Products of non-ferrous metals, Powder metallurgy, Vocabularies, Particle size analysis. Sieving, Testing of metals, Ferroalloys, Information sciences. Publishing, Non-destructive testing, Protection against fire, Environmental protection, Metalliferous minerals, Iron and steel products, Radiation measurements, Test conditions and procedures in general, Refractories, Construction materials, Natural gas, Special measuring equipment for use in telecommunications, Woodworking equipment, Rubber, Products of the textile industry, Lubricants, industrial oils and related products, Photography, Products of the chemical industry, Corrosion of metals, Optoelectronics. Laser equipment, Fruits. Vegetables, Water quality, Paint ingredients, Fuels, Inorganic chemicals, Fertilizers.

国家市场监督管理总局、中国国家标准化管理委员会, Spectroscopic Qualitative Analysis

GB/T 37969-2019 Standard guidelines for near infrared qualitative analysis
GB/T 6040-2019 General rules for infrared analysis
GB/T 39540-2020 Fast determination of shale gas composition—Laser Raman spectroscopy
GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
GB/T 38386-2019 Gas analysis—Determination of oxynitride in gases—The method of Cavity Ring-Down Spectroscopy
GB/T 16597-2019 Analytical methods of metallurgical products—General rule for X-ray fluorescence spectrometric methods

RU-GOST R, Spectroscopic Qualitative Analysis

GOST 1367.1-1983 Antimony. Spectral method for the determination of impurities without preliminary concentration
GOST 8776-1999 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 16274.8-1977 Bismuth. Spectral methods of analysis
GOST 14339.5-1991 Tungsten. Methods of spectral analysis
GOST 8857-1977 Lead. Method of spectral analysis
GOST 12223.0-1976 Iridium. Method of spectral analysis
GOST 12227.0-1976 Rodium. Method of spectral analysis
GOST 14316-1991 Molybdenum. Spectrum analysis methods
GOST 8776-1979 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 18895-1997 Steel. Method of photoelectric spectral analysis
GOST 17261-1977 Zinc. Spectral method of analysis
GOST 15483.10-2004 Tin. Methods of atomic-emission spectral analysis
GOST 3221-1985 Primary aluminium. Methods of spectral analysis
GOST 12228.1-1978 Ruthenium. Method of spectral analysis
GOST 17818.15-1990 Graphite. Method of spectrum analysis
GOST 22397-1977 Zinc powder. Method of spectral analysis
GOST 27611-1988 Cast iron. Photoelectrical sspeciral method of analisis
GOST 18895-1981 Steel. Method of photoelectric spectral analysis
GOST 15483.10-1978 Tin. Spectral methods for determination of bismuth, iron, copper, arsenic, lead, antimony, zinc and aluminium
GOST 23328-1995 Zinc alloys. Methods of spectral analysis
GOST 1367.11-1983 Antimony. Chemical-spectral method of analysis
GOST 7727-1981 Aluminium alloys. Methods of spectral analysis
GOST 7728-1979 Magnesium alloys. Methods of spectral analysis
GOST 12224.1-1978 Osmimum. Chemical-spectral method of analysis
GOST 13348-1974 Antimonous antimonides. Method of spectral analysis
GOST 23902-1979 Titanium alloys. Methods of spectral analysis
GOST 7.28-1980 System of standards "information, libraries and publishing". Representation of extended Latin alphabet for information interchange on magnetic tapes
GOST 23328-1978 Zinc antifriction alloys. Methods of spectral analysis
GOST 9717.2-1982 Copper. Method of spectral analysis of metal standart specimens with photographic registration of spectrum
GOST R 57941-2017 Polymer composites. Infrared spectroscopy. Qualitative analysis
GOST 30082-1993 Zinc-aluminium alloys. Spectral method of analysis
GOST 27809-1995 Cast iron and steel. Methods of spectrographic analysis
GOST 9816.4-1984 Technical tellurium. Method of spectral analysis
GOST 12551.2-1982 Alloys platinum-copper. Methods of spectral analysis
GOST 12553.2-1977 Platinum-palladium alloys. Method of spectral of analysis
GOST 12554.2-1983 Platinum-ruthenium alloys. Method of spectral analysis
GOST 12555.2-1983 Silver-platinum alloys. Method of spectral analysis
GOST 12556.2-1982 Alloys platinum-rhodium. Methods of spectral analysis
GOST 12558.2-1978 Palladium-silver alloys. Method of spectral of analysis
GOST 12562.2-1982 Alloys gold-platinum. Methods of spectral analysis
GOST 12563.2-1983 Gold-palladium alloys. Method of spectral analysis
GOST 16321.2-1970 Silver-copper alloys. Method of spectral analysis
GOST 16273.1-1985 Technical selenium. Method of spectral analysis
GOST 27809-1988 Steel and cast iron. Methods of spectropgapnic analysis
GOST 33405-2015 Testing of chemicals of environmental hazard. Determination of the UV-VIS absorption spectral by spectrophotometric method
GOST R 55080-2012 Cast iron. Method of X-ray fluorescence (XRF) analysis
GOST 17261-2008 Zinc. Methods of atomic-emission spectral analysis
GOST 16274.1-1977 Bismuth. Method of spectrochemical analysis
GOST 12550.2-1982 Palladium-iridium alloys. Methods of spectrografic analysis
GOST 12552.2-1977 Platinum-nickel alloys. Method of spectral of analysis
GOST 12559.2-1982 Rlatinum-iridium alloys. Methods of spectrografic analysis
GOST 12560.2-1978 Palladium-silver-cobalt alloys. Method of spectral analysis
GOST 12561.2-1978 Palladium-silver-copper alloys. Method of spectral analysis
GOST 12564.2-1983 Aurrum-palladium-platinum alloys. Method of spectral analysis
GOST 25567-1982 Concentrated kaolin. Spectrum analysis method
GOST 30508-1997 Lead concentrates. Method of spectrum analysis
GOST 12645.8-1982 Indium. Method of chemical and spectral analysis for the determination of tin
GOST 27981.1-1988 Copper of high purity. Methods of atomic-spectral analysis
GOST 27981.1-2015 High purity copper. Method of atomic-spectral analysis
GOST 20997.0-1981 Thallium. General requirements for methods of spectral analysis
GOST R 54153-2010 Steel. Method of atomic emission spectral analysis
GOST R 57986-2017 Polymer composites. Infrared spectroscopy. Near infrared qualitative analysis
GOST 6012-2011 Nickel. Methods of chemical-atomic-emission spectral analysis
GOST 23201.0-1978 Alumina. General requirements for methods of spectral analysis
GOST 8776-2010 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 6012-1978 Nickel. Methods of chemical-atomic-emission spectral analysis
GOST 33438-2015 Juice products. Determination of proline by spectrophotometric method
GOST 27981.3-1988 Copper of high purity. Method of emission-spectral analysis with photoelectric registration of spectrum / Note: To be replaced by GOST 31382 (2009).
GOST 29103-1991 Tungsten, molibdenum. General requirements for methods of chemical and spectral analysis
GOST 20068.1-1979 Tinless bronze. Method of spectral analysis of metal standard specimens with spectrum photographic record
GOST 20068.2-1979 Tinless bronze. Method of spectral analysis of metal standard specimens with spectrum photo-electric record
GOST 9717.3-1982 Copper. Method of spectral analysis of oxide standart specimens
GOST 11884.15-1982 Tungsten concentrate. General requirements for methods of spectrum analysis
GOST 16865-1979 X-ray apparatus for structural and spectral analyses. Terms and definitions
GOST 20068.3-1979 Tinless bronze. Method of spectral analysis of oxide standard specimens with spectrum photographic record
GOST 9717.1-1982 Copper. Method of spectral analysis of metal standart specimens with photoelectrical registration of spectrum / Note: To be replaced by GOST 31382 (2009).

Taiwan Provincial Standard of the People's Republic of China, Spectroscopic Qualitative Analysis

CNS 14341-1999 Optical spectrum analyzer
CNS 12416-1988 Genenral Rules for Emission Spectroscopic Analysis
CNS 14896-14-2005 Titanium - Method for atomic emission spectrometric analysis
CNS 12416-2006 General rules for atomic emission spectrometry
CNS 14896.14-2005 Titanium - Method for atomic emission spectrometric analysis
CNS 10006-1984 Method for Photoelectric Emission Spectrochemical Analysis of Iron And Steel
CNS 9705-1984 General Rules for Emission-Spectroscopic Analysis of Iron and Steel
CNS 10503-1984 Emission-Spectroscopic Analysis for Pig Iron and Cast Iron
CNS 9706-1984 General Rules for Photoelectric Emission Spectrochemical Analysis of Iron and Steel
CNS 13921-1997 Method of atomic emission spectrophotoelectric analysis for die casting zinc alloy
CNS 10005-1984 General Rules for Photoelectric Emission Spectrochemical Analysis of Metallic Materials
CNS 12126-1987 Method of Chemical Analysis by Atomic Absorption Spectrophotometry for Copper and Copper Alloys
CNS 13388-1994 Methods for Inductively Coupled Plasma Emission Spectrochemical Analysis of Steel
CNS 11071-1984 Emission-Spectroscopic Analysis for Carbon Steel and Low Alloy Steel
CNS 11209-1995 General Rules for Chemical Analysis by Atomic Absorption Spectrophotometry
CNS 11206-2002 Iron and steel─Methods for atomic absorption spectrometric analysis
CNS 12013-1987 Method of Test for Lead in Gasoline by Atomic Absorption Spectrometry
CNS 12788-1990 Method of X-ray Fluorescence Spectrometric Analysis of Refractory Bricks and Refractory Mortars

RO-ASRO, Spectroscopic Qualitative Analysis

STAS 1706/17-1971 CUPPER speelrochemical analysis
STAS 11464-1980 IRON AND STEEL Spectrochemical analysis
STAS 5177-1981 EMISSION SPECTROGRAPHICAL ANALYSIS Terminology
STAS 12368-1985 Modifier alloys for cast irons SPECTROGRAPHIC ANALYSIS BY EMISSION
STAS 10837/1-1977 SELENIUM General specifications for chemical and spectral analysis
STAS 1776/1-1978 LEAD General specifications for carrying out chemical and spectral analysis

U.S. Air Force, Spectroscopic Qualitative Analysis

AIR FORCE A-A-59684 A-2009 OPTICAL SPECTRUM ANALYZER
AIR FORCE A-A-59684-2004 OPTICAL SPECTRUM ANALYZER

Professional Standard - Electron, Spectroscopic Qualitative Analysis

SJ/Z 3206.10-1989 General rules for analysis of properties of emision spectrum
SJ 2656-1986 Mothod of tungsten spectral analysis
SJ 2657-1986 Mothod of molybdeuum spectral analysis
SJ/Z 3206.11-1989 General rules for analysis of quantities of emision spectrum
SJ/Z 3206.3-1989 Instrument and its performance requirements for determination of emision spectrum
SJ/Z 3206.2-1989 Laser source and its performance requirements for determination of emision spectrum
SJ/Z 1544-1979 Method for spectral analysis of Nickel-- Tungsten-Magnesium alloy
SJ/Z 3206.7-1989 Geneeral rules for preparation and sampling sample for emission spectrum analysis

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Spectroscopic Qualitative Analysis

GB/T 32199-2015 Infrared Spectroscopy Qualitative Analysis Technique General Rules
GB/T 19627-2005 Particle size analysis-Photon correlation spectroscopy
GB/T 5123-1985 Nickel--Method of spectral analysis
GB/T 5871-1986 Method for spectrographic analysis of aluminium and its alloys
GB/T 32198-2015 General Rules for Quantitative Analysis Techniques of Infrared Spectroscopy
GB/T 25481-2010 On-line ultraviolet/visible spectrum analyzer
GB/T 29858-2013 Standard guidelines for molecular spectroscopy multivariate calibration quantitative analysis
GB/T 16599-1996 Methods for emission spectrum analysis of molybdenum
GB/T 16600-1996 Methods for emission spectrum analysis of tungsten
GB/T 9259-1988 Terminology of emission spectochemical analysis
GB/T 6040-2002 General rules for infrared analysis
GB/T 11170-1989 Method for photoelectric emission spectroscopic analysis of stainless steel
GB/T 15337-1994 General rules for atomic absorption spectrometric analysis
GB/T 15337-2008 General rules for atomic absorption spectrometric analysis
GB/T 7999-2000 Standard method for direct reading spectromertric analysis of aluminum and its alloys
GB/T 42360-2023 Total Reflection X-ray Fluorescence Spectroscopic Analysis of Water for Surface Chemical Analysis
GB/T 32266-2015 Method of performance testing for atomic fluorescence spectrometer
GB/T 14203-1993 General rule for photoelectric emission spectroscopic analysis of iron, steel and alloy
GB/T 26042-2010 Methods for analysis of zinc and zinc alloys.The optical emission spectrometry
GB/T 12689.9-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of antimony content-The atomic fluorescence spectrometer and the flame atomic absorption spectrometric method
GB/T 5678-1985 The method for sampling cast alloys for spectrochemical analysis
GB/T 5678-2013 Sampling methods of spectrochemical analysis for cast alloys
GB/T 8151.15-2005 Methods for chemical analysis of zinc concentrates-Determination of mercury content-Atomic fluorescence spectrometry method
GB/T 8152.11-2006 Methods for chemical analysis of lead concentrates. Determination of mercury content. Atomic fluorescence spectrometer method
GB/T 8152.5-2006 Methods for chemical analysis of lead concentrates. Determination of arsenic content. Atomic fluorescence spectrometer method
GB/T 7999-2015 Optical emission spectrometric analysis method of aluminum and aluminum alloys
GB/T 7999-2007 Optical emission spectrometric analysis method of aluminum and aluminum alloys
GB/T 4325.3-2013 Methods for chemical analysis of molybdenum.Part 3:Determination of bismuth content.Atomic fluorescence spectrometry
GB/T 4325.4-2013 Methods for chemical analysis of molybdenum.Part 4:Determination of tin content.Atomic fluorescence spectrometry
GB/T 4325.5-2013 Methods for chemical analysis of molybdenum.Part 5:Determination of antimony content.Atomic fluorescence spectrometry
GB/T 4325.6-2013 Methods for chemical analysis of molybdenum.Part 6:Determination of arsenic content.Atomic fluorescence spectrometry
GB/T 8156.10-1987 Aluminium fluoride for industrial use--Determination of sulphur content--X-ray fluorescence spectrometric method
GB/T 16597-1996 Analytical methods of metallurgical products. General rule for X-ray fluorescence spectrometric methods
GB/T 19502-2004 Surface chemical analysis-Glow discharge optical emission spectrometry(GD-OSE)-Introduction to use

National Metrological Verification Regulations of the People's Republic of China, Spectroscopic Qualitative Analysis

JJG(电子) 30901-2006 Verification Regulations for Spectrum Analyzers
JJG 1035-2022 Communication Spectrum Analyzer
JJG 1035-2008 Verification Regulation of Optical Spectrum Analyzers in Telecommunication
JJG 955-2000 Verification Regulation of Special Analysis Microdensitimeters

BR-ABNT, Spectroscopic Qualitative Analysis

ABNT P-EB-304-1969

ZA-SANS, Spectroscopic Qualitative Analysis

SANS 5567:1968 Spectrographic analysis of copper
SANS 62129:2008 Calibration of optical spectrum analyzers

German Institute for Standardization, Spectroscopic Qualitative Analysis

DIN 51009:2013-11 Optical atomic spectral analysis - Principles and definitions
DIN 51009:2013 Optical atomic spectral analysis - Principles and definitions
DIN 51009:2001 Optical atomic spectral analysis - Principles and definitions
DIN ISO 13321:2004 Particle size analysis - Photon correlation spectroscopy (ISO 13321:1996)
DIN 5030-3:2021-09 Spectral measurement of radiation - Spectral isolation - Definitions and characteristics
DIN 5030-3:1984 Spectral measurement of radiation; spectral isolation; definitions and characteristics
DIN EN 62129:2007 Calibration of optical spectrum analyzers (IEC 62129:2006); German version EN 62129:2006
DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
DIN ISO 16129:2020-11 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
DIN 51008-2:1990 Optical emission spectral analysis (OES); flame and plasma systems
DIN 51820:2013 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum
DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
DIN EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis; English version of DIN EN 14726:2005
DIN EN 15079:2015-07 Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES); German version EN 15079:2015
DIN EN ISO 3815-1:2005 Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry (ISO 3815-1:2005); German version EN ISO 3815-1:2005

Korean Agency for Technology and Standards (KATS), Spectroscopic Qualitative Analysis

KS M 0028-2009(2019) General rules for light emission spectrochemical analysis
KS D 2086-2004 Method for atomic emission spectrometric analysis of titanium
KS D 2518-2005 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS C 6918-1995 Test methods of fiber-optic spectrum analyzer
KS D ISO 3815-2002(2006) Zinc and zinc alloys－Spectrographic analysis
KS D 2518-1982 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 1681-2003 Method for emission spectrochemica1 analysis of aluminium ingot
KS D 1684-2008 Methods for emission spectrographic analysis of magnesium ingot
KS D 1682-2008 Methods for emission spectrochemical analysis of lead ingot
KS D 1654-1993 General Rules for X-ray Fluorescence Spectrometric Analysis of Iron and Steel
KS D 1682-2020 Method for photoelectric emission spectrochemical analysis of lead metal
KS D 1654-2003(2016) General rules for X-ray fluorescence spectrometric analysis of iron and steel
KS D 2710-2019 Methods for X-ray fluorescence spectrometric analysis of ferroniobium
KS D 1655-2008(2019) Method for X-ray fluorescence spectrometric analysis of iron and steel
KS D ISO 3815:2011 Zinc and zinc alloys－Spectrographic analysis
KS D 2558-1995 Method for emission spectrographic analysis of tantalum
KS D 2553-2015 Tantalum－Method for atomic absorption spectrometric analysis
KS D 1684-1993 Methods for emission spectrographic analysis of magnesium ingot
KS D 1682-1993 Methods for emission spectrochemical analysis of lead ingot
KS D 1684-1985 Methods for emission spectrographic analysis of magnesium ingot
KS D 2518-2015 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 1655-1993 Method for X-Ray Fluorescence Spectrometric Analysis of Iron and Steel
KS M 0017-1995 General rules for X-ray fluorescence spectrometric analysis
KS D 1898-2019 Copper alloys —Methods for X-ray fluorescence spectrometric analysis
KS D 1673-2007 Methods for inductively coupled plasma emission spectrochemical analysis of steel
KS D ISO 3815-1:2006 Zinc and zinc alloys-Part 1:Analysis of solid samples by optical emission spectrometry
KS D 1686-2011(2016) Method for x-ray fluorescence spectrometric analysis of ferroalloys
KS L 3316-2014 Method for X-ray fluorescence spectrometric analysis of refractory products
KS D 1686-2011(2021) Method for x-ray fluorescence spectrometric analysis of ferroalloys
KS L 3316-2014(2019) Method for X-ray fluorescence spectrometric analysis of refractory products
KS D 2518-2015(2020) Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS L 3316-1998 Method for X-ray fluorescence spectrometric analysis of refractory products
KS L 3316-1988 Method for X-ray fluorescence spectrometric analysis of refractory products
KS D 2569-2005 Methods for ICP emission spectrometric analysis of tantalum
KS D 2568-2008 Tantalum－Method for atomic absorption spectrometric analysis
KS D 2569-2016 Methods for ICP emission spectrometric analysis of tantalum
KS D 2553-2015(2020) Tantalum－Method for atomic absorption spectrometric analysis
KS E 3030-2007(2012) Atomic absorption spectrochemical analysis for iron ores
KS D 2568-2019 Tantalum－Method for atomic absorption spectrometric analysis
KS D 2569-2016(2021) Methods for ICP emission spectrometric analysis of tantalum
KS E 3030-1982 Atomic absorption spectrochemical analysis for iron ores
KS D ISO 22309-2011(2016) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
KS D 1650-1993 General rules for photoelectric emission spectrochemical analysis of metal materials
KS D 1680-2008 General rules for photographic emission spectrochemical analysis of metal materials
KS D 1659-2008 Methods for atomic absorption spectrophotometric analysis of iron and steel
KS M 0016-1995 General rules for atomic absorption spectrochemical analysis
KS D 1681-1993 Method for emission spectrochemical analysis of aluminium ingot
KS D 2086-1993 Methods for emission spectrochemical analysis of titanium
KS M 0016-2010(2020) General rules for atomic absorption spectrochemical analysis
KS C 6918-1995(2020) Test methods of fiber-optic spectrum analyzer
KS D 1684-2008(2018) Methods for emission spectrographic analysis of magnesium ingot
KS D 2086-2019 Methods for atomic emission spectrometric analysis of titanium
KS D 2597-1996(2016) Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys
KS D ISO 22309-2011(2021) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS M 0012-2009(2019) General rules for molecular absorptiometric analysis
KS D ISO 15470:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Description of selected instrumental performance parameters
KS E 3076-2017 Methods for X－ray fluorescence spectrometric analysis of silica stone and silica sand
KS D 1650-2008 General rules for photoelectric emission spectrochemical analysis of metal materials
KS E 3076-2022 Methods for X-ray fluorescence spectrometric analysis of silica stone and silica sand
KS D 1899-2019 Methods for photoelectric emission spectrochemical analysis of electrolytic cathode copper
KS D 1929-2019 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
KS D 1929-2004 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
KS D 2597-1996(2021) Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys
KS D 1899-2003 Methods for emission spectrochemical analysis of electrolytic cathode copper
KS D 1683-1993 Method for emission spectrochemical analysis of silver ingot
KS D 1681-2018 Method for emission spectrochemical analysis of aluminium ingot
KS M 0032-2009(2019) General rules for ICP emission spectrochemical analysis
KS D 1852-2005 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys
KS L 3316-2009 Method for X-ray fluorescence spectrometric analysis of refractory brikcs and refractory mortars
KS E 3075-2002 Method for X－ray fluorescence spectrometric analysis of limestone and dolomite
KS D 1852-2015 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys
KS D 1852-2020 Methods for optical emission spectrochemical analysis of aluminium and aluminium alloys

Professional Standard - Education, Spectroscopic Qualitative Analysis

JY/T 0571-2020 General Rules of Fluorescence Spectroscopy Analysis Methods
JY/T 0566-2020 General rules for atomic fluorescence spectrometry
JY/T 0573-2020 General Rules of Laser Raman Spectroscopy Analysis Method
JY/T 002-1996 General Rules for Laser Raman Spectroscopy Analysis Methods
JY/T 0572-2020 General Rules for Analytical Methods of Circular Dichroism Spectroscopy

Professional Standard - Forestry, Spectroscopic Qualitative Analysis

LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood

European Committee for Standardization (CEN), Spectroscopic Qualitative Analysis

CEN EN 62129-2006 Calibration of optical spectrum analyzers
CEN EN 62129-2006_ Calibration of optical spectrum analyzers
EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
PREN 14726-2003 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
EN 12019:1997 Zinc and Zinc Alloys - Optical Emission Spectrometric Analysis
CEN EN 14726-2005 Aluminium and aluminium alloys — Chemical analysis — Guideline for spark optical emission spectrometric analysis
CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry

Association Francaise de Normalisation, Spectroscopic Qualitative Analysis

NF C93-845:2006 Calibration of optical spectrum analyzers.
NF X11-672:1996 Particle size analysis. Photon correlation spectroscopy.
NF A06-840:1998 Zinc and zinc alloys. Optical emission spectrometric analysis.
NF X21-061:2008 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution.
NF A06-590:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis.
NF A07-510X2:1975 ANALYSIS OF NON-ALLOYED ALUMINIUM BY EMISSION SPECTROGRAPHY.
NF A07-510:1971 Analysis of non-alloyed aluminium by emission spectrography.
NF A07-515:1971 Analysis of aluminium copper alloys by emission spectrography.
NF ISO 4735:2002 Huiles essentielles de Citrus - Détermination de la valeur CD par analyse spectrométrique dans l'ultraviolet
NF A11-103:1977 Chemical analysis of ferroniobium. Determination of niobium by X ray fluorescence spectrometry.
NF X21-053*NF ISO 14707:2006 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use
NF A07-500:1979 Analysis of aluminium and its alloys by emission spectrometry.
NF A07-822:1954 Analyse chimique des alliages de zinc pour coulée sous pression - Dosage spectrographique de l'étain
XP A06-379-1999 Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry.
NF X21-003:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry.
NF U44-145:1984 FERTILIZERS AND SOILS CONDITIONERS. DETERMINATION OF MAGNESIUM BY ATOMIC ABSORPTION SPECTROMETRIC METHOD.
NF EN 15079:2015 Cuivre et alliages de cuivre - Analyse par spectrométrie d'émission optique à étincelles (SEO-E)
NF A06-840-1*NF EN ISO 3815-1:2005 Zinc and zinc alloys - Part 1 : analysis of solid samples by optical emission spectrometry

International Organization for Standardization (ISO), Spectroscopic Qualitative Analysis

ISO 13321:1996 Particle size analysis - Photon correlation spectroscopy
ISO 3815:1976 Zinc and zinc alloys; Spectrographic analysis
ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
ISO 24237:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
ISO 4650:2005 Rubber - Identification - Infrared spectrometric method
ISO 4650:1984 Rubber; Identification; Infra-red spectrometric method
ISO 4650:2012 Rubber - Identification - Infrared spectrometric methods
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 16129:2012 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
ISO 3028:1974 Photography — Expendable photoflash lamps — Determination of relative spectral energy distribution for calculation of spectral distribution index
ISO 14707:2015 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use
ISO 14707:2000 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use
ISO 14707:2021 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use
ISO 16962:2005 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
ISO/TR 18392:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for determining backgrounds
ISO 15470:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
ISO/TS 25138:2010 Surface chemical analysis - Analysis of metal oxide films by glow-discharge optical-emission spectrometry
ISO 22309:2006 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS)
ISO 3815-1:2005 Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry

Standard Association of Australia （SAA）, Spectroscopic Qualitative Analysis

AS 4549.1:1999 Particle size analysis - Photon correlation spectroscopy
AS 2134.2:1999 Recommended practice for chemical analysis by atomic absorption spectrometry - Graphite furnace spectrometry
AS ISO 24237:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
AS 2134.3:1994 Recommended practice for chemical analysis by atomic absorption spectrometry - Vapour generation atomic absorption spectrometry
AS ISO 15470:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
AS 2134.1:1999 Recommended practice for chemical analysis by atomic absorption spectrometry - Flame atomic absorption spectrometry

Japanese Industrial Standards Committee (JISC), Spectroscopic Qualitative Analysis

JIS H 1631:2008 Titanium alloys -- Method for X-ray fluorescence spectrometric analysis
JIS G 1256 AMD 1:2010 Iron and steel -- Method for X-ray fluorescence spectrometric analysis (Amendment 1)
JIS G 1351:2006 Ferroalloys -- Method of X-ray fluorescence spectrometric analysis
JIS C 6192:2008 Calibration of optical spectrum analyzers
JIS G 1256:1997 Iron and steel -- Method for X-ray fluorescence spectrometric analysis
JIS H 1669:1990 Method for X-ray fluorescence spectrometric analysis of zirconium alloys
JIS G 1351:1987 Method for X-ray fluorescence spectrometric analysis of ferroalloys
JIS M 8205:2000 Iron ores -- X-ray fluorescence spectrometric analysis
JIS H 1123:2021 Method for photoelectric emission spectrochemical analysis of lead metal
JIS H 1691:1968 Method for spectrochemical analysis of tantalum
JIS H 1183:2007 Method for emission spectrochemical analysis of silver bullion
JIS H 1305:2005 Method for optical emission spectrochemical analysis of aluminium and aluminium alloys
JIS R 2216:2005 Methods for X-ray fluorescence spectrometric analysis of refractory products
JIS H 1123:1995 Method for photoelectric emission spectrochemical analysis of lead metal
JIS H 1630:1995 Method for atomic emission spectrometric analysis of titanium
JIS H 1683:2002 Tantalum -- Method for atomic absorption spectrometric analysis
JIS H 1630:1975 Method for atomic emission spectrometric analysis of titanium
JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy
JIS K 6230:2006 Rubber -- Identification -- Infrared spectrometric method
JIS K 6230:2018 Rubber -- Identification -- Infrared spectrometric methods
JIS H 1163:1991 Method for photoelectric emission spectrochemical analysis of cadmium metal
JIS H 1292:1997 Method for X-ray fluorescence spectrometric analysis of copper and copper alloys
JIS H 1287:2015 Nickel and nickel alloys -- Methods for X-ray fluorescence spectrometric analysis
JIS G 1256 AMD 2:2013 Iron and steel.Method for X-ray fluorescence spectrometric analysis (Amendment 2)
JIS H 1113:2022 Method for photoelectric emission spectrochemical analysis of zinc metal
JIS K 0150:2009 Surface chemical analysis -- Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
JIS G 1202:1975 General rules on emission-spectroscopic analysis for iron and steel
JIS G 1257:1994 Iron and steel -- Methods for atomic absorption spectrometric analysis
JIS K 0214:2006 Technical terms for analytical chemistry (Chromatography part)
JIS C 6183-1:2019 Optical spectrum analyzers -- Part 1: Test methods
JIS K 0214:2013 Technical terms for analytical chemistry (Chromatography part)
JIS K 0162:2010 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Description of selected instrumental performance parameters
JIS H 1103:1995 Method for photoelectric emission spectrochemical analysis of electrolytic cathode copper
JIS H 1560:2016 Method for photoelectric emission spectrochemical analysis of die casting zinc alloys
JIS H 1303:1976 Method for emission spectrochemical analysis of aluminium ingot
JIS H 1322:1976 Method for emission spectrochemical analysis of magnesium ingot
JIS H 1305:1976 Method for photoelectric emission spectrochemical analysis of aluminium and aluminium alloy

British Standards Institution (BSI), Spectroscopic Qualitative Analysis

BS EN 62129:2006 Calibration of optical spectrum analyzers
BS EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
BS EN 12019:1998 Zinc and Zinc Alloys - Optical Emission Spectrometric Analysis
BS ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
BS EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments. Optical spectrum analyzers
BS ISO 4650:2006 Rubber - Identification - Infrared spectrometric method
BS ISO 4650:2012 Rubber. Identification. Infrared spectrometric methods
BS DD ENV 12908:1998 Lead and lead alloys - Analysis by optical emission spectrometry (OES) with spark excitation
BS EN ISO 3815-1:2005 Zinc and zinc alloys - Analysis of solid samples by optical emission spectrometry
BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 16129:2012 Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
BS ISO 24237:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
BS ISO 11505:2012 Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
BS ISO 15470:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
BS ISO 15470:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Description of selected instrumental performance parameters
BS DD ISO/TS 25138:2011 Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry
BS ISO 13424:2013 Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of results of thin-film analysis
BS ISO 14707:2015 Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
BS ISO 14707:2000 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use

Professional Standard - Non-ferrous Metal, Spectroscopic Qualitative Analysis

YS/T 82-2006 Basis platinum as spectral analysis
YS/T 83-2006 Basis palladium as spectral analysis
YS/T 84-2006 Basis iridum as spectral analysis
YS/T 85-2006 Basis rhodium as spectral analysis
YS/T 82-1994 Platinum substrates for spectroscopic analysis
YS/T 83-1994 Palladium Matrix for Spectroscopic Analysis
YS/T 84-1994 Iridium matrix for spectroscopic analysis
YS/T 85-1994 Rhodium Matrix for Spectroscopic Analysis
YS/T 631-2007 Methods for analysis of zinc.The optical emission spectrometry
YS/T 558-2009 Methods for emission spectrum analysis of molybdenum
YS/T 559-2009 Methods for emission spectrum analysis of tungsten
YS/T 558-2006 Molybdenum Emission Spectroscopy Analysis Method
YS/T 559-2006 Tungsten Emission Spectroscopy Analysis Method
YS/T 536.7-2009 Methods for chemical analysis of bismuth.Determination of arsenic content.Atomic fluorescence spectrometric method
YS/T 536.11-2009 Methods for chemical analysis of bismuth.Determination of mercury content.Atomic fluorescence spectrometric method
YS/T 464-2003 Methods for analytical of copper cathode-The optical emission spectrometry
YS/T 482-2005 Methods for analysis of copper and copper alloys-The atomic emission spectrometry
YS/T 555.4-2009 Methods for chemical analysis of molybdenum concentrate.Determination of tin content.Atomic fluorescence spectrometry
YS/T 555.3-2009 Methods for chemical analysis of molybdenum concentrate.Determination of arsenic conten.Atomic fluorescence spectrometry
YS/T 1036-2015 Test method of optical emission spectrometric analysis of magnesium rare earth alloys
YS/T 872-2013 Methods for chemical analysis gallium.Determination of mercury in industrial gallium.Atomic fluorescence spectrometer method
YS/T 536.4-2009 Methods for chemical analysis of bismuth.Determination of silver content.Flame atomic absorption spectrophotmetric method and electrothermal atomic absorption spectrometric method
YS/T 1605.3-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 3: Determination of bismuth content— Flame atomic absorption spectrometry and atomic fluorescence spectrometry

International Electrotechnical Commission (IEC), Spectroscopic Qualitative Analysis

IEC PAS 62129:2004 Calibration of optical spectrum analyzers
IEC 62129:2006 Calibration of optical spectrum analyzers
IEC 61976:2000 Nuclear instrumentation - Spectrometry - Characterization of the spectrum background in HPGe nuclear gamma-ray spectrometry

Danish Standards Foundation, Spectroscopic Qualitative Analysis

DS/EN 62129/Corr. 1:2007 Calibration of optical spectrum analyzers
DS/EN 62129:2006 Calibration of optical spectrum analyzers
DS/EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
DS/EN 15079:2007 Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES)
DS/ENV 12908:1998 Lead and lead alloys - Analysis by optical emission spectrometry (OES) with spark excitation
DS/CEN/TR 10354:2012 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry

IN-BIS, Spectroscopic Qualitative Analysis

工业和信息化部, Spectroscopic Qualitative Analysis

YS/T 84-2020 Iridium matrix for spectroscopic analysis
YS/T 82-2020 Platinum matrix for spectroscopic analysis
YS/T 83-2020 Palladium matrix for spectroscopic analysis
YS/T 85-2020 Rhodium matrix for spectroscopic analysis
YS/T 464-2019 Direct reading spectroscopic analysis method of copper cathode
YS/T 1171.8-2017 Methods for chemical analysis of recycled zinc raw materials Part 8: Determination of mercury content by atomic fluorescence spectrometry and cold atomic absorption spectrometry
YS/T 1033-2015 Determination of element content of dry anti-seepage materials by X-ray fluorescence spectrometry

GOSTR, Spectroscopic Qualitative Analysis

GOST 9716.2-1979 Copper-zinc alloys. Method spectral analysis of metal standard spesimens with photoelectric registration of spectrum
GOST 9717.2-2018 Copper. Method of spectral analysis by metal standard specimens with photographic registration of spectrum
GOST 9716.3-1979 Copper-zinc alloys. Method of spectral analysis of oxide spesimens with photographic registration of spectrum
GOST 9716.1-1979 Copper-zinc alloys. Method of spectral analysis of metal standard spesimens with photographic registration of spectrum
GOST 9717.3-2018 Copper. Method of spectral analysis by oxide standard specimens
GOST R 57987-2017 Polymer composites. Infrared spectroscopy. Multivariate quantitative analysis

American Society for Testing and Materials (ASTM), Spectroscopic Qualitative Analysis

ASTM E168-92 Standard Practice for General Techniques of Infrared Quantitative Analysis
ASTM E1097-97 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
ASTM E10-08 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E10-15 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E2626-08 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
ASTM E2626-08e1 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
ASTM D8340-20a Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM D8340-20 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM D8340-22 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E718-80 Method for Spectrographic Analysis of Cartridge Brass
ASTM E1097-03 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
ASTM D8340-21 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM D5381-93(2003) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
ASTM D5381-93(1998) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E415-99a Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
ASTM E1999-99e1 Standard Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry
ASTM E1999-99(2004) Standard Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry
ASTM E1621-21 Standard Guide for X-Ray Emission Spectrometric Analysis
ASTM E1621-05 Standard Guide for X-Ray Emission Spectrometric Analysis

CZ-CSN, Spectroscopic Qualitative Analysis

CSN 42 0600 Cast.5-1975 Antimony of high purity. Methods of chemical and spectral analysis. Dctermination of silver, bismuth. copper, iron. nickel, lead. and tin by spectral method
CSN 42 0600 Cast.3-1975 Antimony of high parity. Methods of chemical and spectral analysis. Delermmation of arsenic by photomotric metod
CSN 42 0648 Cast.4-1986 Chemical analysis of metallic chromium. Determination of iron by the photometric and the atomic absorption method methods
CSN 42 0615 Cast.2-1974 Chemical analysis of brazing alloys Determination of siliver by AAS
CSN 42 0636 Cast.2-1975 Chemical analysis of hard lead. Determination of silver by AAS
CSN 42 0615 Cast.14-1974 Chemical analysis of brazing alloys. Determination of antimony by AAS
CSN 42 0615 Cast.13-1974 Chemical analysis of brazing alloys. Determination of lead by AAS
CSN 42 0615 Cast.7-1974 Chemical analysis of brazing alloys. Determination of iron by AAS
CSN 42 0636 Cast.12-1975 Chemical analysis of hard lead. Determination of zinc by AAS

CEN - European Committee for Standardization, Spectroscopic Qualitative Analysis

EN 14726:2019 Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry

Professional Standard - Ferrous Metallurgy, Spectroscopic Qualitative Analysis

YB/T 4177-2008 Determination of chemical composition in stag by X-ray fluorescence spectrometry

Group Standards of the People's Republic of China, Spectroscopic Qualitative Analysis

T/CSTM 00964-2022 General rules for performance evaluation of atomic spectrometer
T/ZFB 0050-2023 Textiles—Quantitative analysis of Polyester-cotton blended fabric—Hyperspectral method
T/QAS 082.10-2023 Chemical Analysis of Rock Salt and Glauber's Salt - Part 10: Determination of Arsenic by Atomic Fluorescence Spectrometry

Professional Standard - Commodity Inspection, Spectroscopic Qualitative Analysis

SN/T 2785-2011 Photoelectric Emission Spectroscopic Analysis of Zinc and Zinc Alloys
SN/T 2786-2011 Photoelectric Emission Spectroscopic Analysis of Magnesium and Magnesium Alloys
SN/T 3914-2014 General rules for infrared spectrometer in minerals

Professional Standard - Agriculture, Spectroscopic Qualitative Analysis

SN/T 5566-2023 General Rules of Laser Micro Raman Spectroscopy Analysis Method

VN-TCVN, Spectroscopic Qualitative Analysis

TCVN 6061-2009 Beer.Determination of colour by spectrophotometric method
TCVN 5270-2008 Honey.Determination of hydroxymetylfurfural by spectrophotometric method

Guangdong Provincial Standard of the People's Republic of China, Spectroscopic Qualitative Analysis

DB44/T 1602-2015 Analysis Method of Stone Composition--X-ray Fluorescence Spectrometry

Shaanxi Provincial Standard of the People's Republic of China, Spectroscopic Qualitative Analysis

DB61/T 1161-2018 Natural Gas Composition Analysis Laser Raman Spectroscopy Marshal

国家能源局, Spectroscopic Qualitative Analysis

SY/T 7433-2018 Composition analysis of natural gas using laser Raman spectroscopy
SY/T 7657.2-2021 Determination of natural gas using photoacoustic spectroscopy-infrared spectroscopy-fuel cell combined method Part 2: Determination of methane content by photoacoustic spectroscopy

SE-SIS, Spectroscopic Qualitative Analysis

SIS SS IEC 714:1983 Electronic measurement equipment - Expression of the properties of spectrum analyzers

IT-UNI, Spectroscopic Qualitative Analysis

UNI 7726-1977 Chemical analysis of ferrous materials. Determination of antimony in steel. Spectrophotometric method with brillant green.

BE-NBN, Spectroscopic Qualitative Analysis

NBN P 32-015-1977 zinc and zinc alloys - Spectrographic analysis

The American Road & Transportation Builders Association, Spectroscopic Qualitative Analysis

AASHTO DIVISION I-A 4.4 Single Mode Spectral Analysis Method - Procedure 2

Lithuanian Standards Office , Spectroscopic Qualitative Analysis

LST EN 62129-2006 Calibration of optical spectrum analyzers (IEC 62129:2006)
LST EN 62129-2006/AC-2007 Calibration of optical spectrum analyzers (IEC 62129:2006)
LST EN 14726-2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
LST EN 15079-2007 Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES)
LST L ENV 12908-2000 Lead and lead alloys - Analysis by Optical Emission Spectrometry (OES) with spark excitation

AASHTO - American Association of State Highway and Transportation Officials, Spectroscopic Qualitative Analysis

DIVISION I-A 4.5-1996 Multimode Spectral Analysis Method - Procedure 3

AENOR, Spectroscopic Qualitative Analysis

UNE-EN 14726:2006 Aluminum and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectometric analysis

AT-ON, Spectroscopic Qualitative Analysis

ONORM M 6603-2-1997 Water analysis - Determination of potassium and sodium by flame emission spectrometry
ONORM M 6603-1-1997 Water analysis - Determination of potassium and sodium by atomic absorption spectrometry
ONORM M 6608-1996 Water analysis - Determination of hydrocarbons by infrared spectrometry

Professional Standard - Textile, Spectroscopic Qualitative Analysis

FZ/T 01144-2018 Near Infrared Spectroscopy for Quantitative Analysis of Textile Fibers

Professional Standard - Chemical Industry, Spectroscopic Qualitative Analysis

HG/T 2955-1989(1997) Rules for drafting molecular absorption spectrometry analysis standards
HG/T 2954~2955-2008 Standard writing format for atomic absorption spectroscopic analysis method Standard writing format for molecular absorption spectroscopic analysis method

Professional Standard - Aviation, Spectroscopic Qualitative Analysis

HB 6731.1-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 1:Determination of copper content by flame atomic absorption spectrometric method
HB 6731.2-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 2:Determination of magnesium content by flame atomic absorption spectrometric method
HB 6731.3-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 1:Determination of zinc content by flame atomic absorption spectrometric method
HB 6731.4-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 4:Determination of lead content by flame atomic absorption spectrometric method
HB 6731.5-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 5:Determination of cadmium content by flame atomic absorption spectrometric method
HB 6731.6-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 6:Determination of iron content by flame atomic absorption spectrometric method
HB 6731.7-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 7:Determination of manganese content by flame atomic absorption spectrometric method
HB 6731.8-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 8:Determination of nickel content by flame atomic absorption spectrometric method
HB 6731.9-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 9:Determination of chrome content by flame atomic absorption spectrometric method
HB 7716.7-2002 Spectrometric analysis of titanium alloys Part 7:Determination of copper content-Flame atomic absorption spectrometric method
HB 7716.9-2002 Spectrometric analysis of titanium alloys Part 9:Determination of manganese content-Flame atomic absorption spectrometric method
HB 7716.11-2002 Spectrometric analysis of titanium alloys Part 11:Determination of iron content-Flame atomic absorption spectrometric method
HB 7716.12-2002 Spectrometric analysis of titanium alloys Part 12:Determination of silicon content-Flame atomic absorption spectrometric method
HB 7716.1-2002 Spectrometric analysis of titanium alloys Part 1:Determination of aluminum content-Flame atomic absorption spectrometric method
HB 7716.2-2002 Spectrometric analysis of titanium alloys Part 2:Determination of vanadium content-Flame atomic absorption spectrometric method
HB 7716.3-2002 Spectrometric analysis of titanium alloys Part 3:Determination of chromium content-Flame atomic absorption spectrometric method
HB 7716.4-2002 Spectrometric analysis of titanium alloys Part 4:Determination of molybdenum content-Flame atomic absorption spectrometric method
HB 7716.6-2002 Spectrometric analysis of titanium alloys Part 6:Determination of tin content-Flame atomic absorption spectrometric method
HB 7716.10-2002 Spectrometric analysis of titanium alloys Part 10:Determination of trace manganese content-Flame atomic absorption spectrometric method
HB 7716.8-2002 Spectrometric analysis of titanium alloys Part 8:Determination of trace copper content-Flame atomic absorption spectrometric method
HB 7716.5-2002 Spectrometric analysis of titanium alloys Part 5:Determination of trace molybdenum content-Flame atomic absorption spectrometric method

IEC - International Electrotechnical Commission, Spectroscopic Qualitative Analysis

PAS 62129-2004 Calibration of optical spectrum analyzers (Edition 1.0;: 2006)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Spectroscopic Qualitative Analysis

GB/T 32997-2016 Surface chemical analysis—General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
GB/T 32996-2016 Surface chemical analysis—Analysis of metal oxide films by glow-discharge optical emission spectrometry

Professional Standard - Coal, Spectroscopic Qualitative Analysis

MT/T 594-1996 Method for determination of coal microcomponents by fluorescence spectrometry

North Atlantic Treaty Organization Standards Agency, Spectroscopic Qualitative Analysis

STANAG 7017-1994 SPECTROMETRIC ANALYSIS OF AIRCRAFT ENGINE LUBRICANTS

YU-JUS, Spectroscopic Qualitative Analysis

JUS C.A1.650-1987 Methodes of chemical analysis of silver. Determination of impurities contents. Spectrographic metod".

(U.S.) Ford Automotive Standards, Spectroscopic Qualitative Analysis

FORD FLTM EU-AJ 051-01-2000 METHOD OF CARBON TYPE ANALYSIS OF LUBRICATING OILS BY INFRARED SPECTROSCOPY

ES-UNE, Spectroscopic Qualitative Analysis

UNE-EN 15079:2015 Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES)

Professional Standard - Geology, Spectroscopic Qualitative Analysis

DZ/T 0064.81-2021 Methods of Analytical Groundwater Quality Part 81: Determination of Mercury Amounts by Atomic Fluorescence Spectrometry