ZH
RU
ES

Magnetic Powder Inspection

Magnetic Powder Inspection, Total:499 items.

In the international standard classification, Magnetic Powder Inspection involves: On-board equipment and instruments, Testing of metals, Powder metallurgy, Magnetic materials, Equipment for the metallurgical industry, Non-destructive testing, Iron and steel products, Materials for aerospace construction, Vocabularies, Welding, brazing and soldering, Protection against fire, Nuclear energy engineering, Food products in general, Paints and varnishes, Bearings, Valves, Internal combustion engines, Protection against dangerous goods, Equipment for entertainment, Electricity. Magnetism. Electrical and magnetic measurements, Products of the chemical industry, Agricultural machines, implements and equipment, Railway engineering in general, Railway rolling stock, Pipeline components and pipelines, Pumps, Springs, Shipbuilding and marine structures in general, Ceramics, Equipment for petroleum and natural gas industries, Particle size analysis. Sieving, Analytical chemistry, Physics. Chemistry, Glass, PAINT AND COLOUR INDUSTRIES, Data storage devices, Astronomy. Geodesy. Geography, Plastics.

HU-MSZT, Magnetic Powder Inspection

Association Francaise de Normalisation, Magnetic Powder Inspection

NF EN ISO 10893-1/A1:2020 Essais non destructifs des tubes en acier - Partie 1 : contrôle automatisé électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1 ...
NF A95-113:1984 Powder metallurgy. Metallic powders. Determination of flowability by means of a calibrated funnel (hall flowmeter).
NF A09-570:1988 Non destructive testing - Magnetic particle testing - Characterization of products
FD CEN/TR 16638:2014 Essais non destructifs - Essais par ressuage et essais par magnétoscopie à la lumière bleue
NF EN ISO 17638:2016 Contrôle non destructif des assemblages soudés - Magnétoscopie
NF A95-432:1971 Powder metallurgy. Hard metals. Determination of specific saturation magnetization.
NF T30-499-5:2011 Coating powders - Part 5 : determination of flow properties of a powder/air mixture.
NF T30-499-5*NF EN ISO 8130-5:2021 Coating powders - Part 5 : determination of flow properties of a powder/air mixture
NF A95-121:1993 Metallic powders, excluding powders for hardmetals. Determinationof compactibility (compressibility)in uniaxial compression.
NF EN ISO 8130-5:2021 Poudres pour revêtement - Partie 5 : détermination de l'aptitude à la fluidisation d'un mélange poudre/air
NF A09-592*NF EN ISO 12707:2016 Non-destructive testing - Magnetic particle testing - Vocabulary
NF A89-551*NF EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels
NF A09-590-1*NF EN ISO 9934-1:2017 Non-destructive testing - Magnetic particle testing - Part 1 : general principles
FD A09-591*FD CEN/TR 16638:2014 Non-destructive testing - Penetrant and magnetic particle testing using blue light
NF EN ISO 9934-2:2015 Essais non destructifs - Magnétoscopie - Partie 2 : produits indicateurs
NF A09-590-2:2003 Non-destructive testing - Magnetic particle testing - Part 2 : detection media.
NF A09-590-2*NF EN ISO 9934-2:2015 Non-destructive testing - Magnetic particle testing - Part 2 : detection media
NF C28-906:2004 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens.
NF EN ISO 10893-3/A2:2020 Essais non destructifs des tubes en acier - Partie 3 : contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des ...
NF EN ISO 9934-1:2017 Essais non destructifs - Magnétoscopie - Partie 1 : principes généraux du contrôle
NF A09-590:1989 Non destructive testing. Magnetic particle examination. General principles.
NF A09-599:2001 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions.
NF EN ISO 8130-12:2019 Poudres pour revêtement - Partie 12 : détermination de la compatibilité
NF EN IEC 63300:2023 Méthodes d\'essai des propriétés électriques et magnétiques des noyaux en poudre magnétique
NF EN ISO 8130-6:2021 Poudres pour revêtement - Partie 6 : détermination du temps de gélification à une température donnée de poudres thermodurcissables
NF T30-499-6:2011 Coating powders - Part 6 : determination of gel time of thermosetting coating powders at a given temperature.
NF T30-499-6*NF EN ISO 8130-6:2021 Coating powders - Part 6 : determination of gel time of thermosetting coating powders at a given temperature
NF T30-499-12:2011 Coating powders - Part 12 : determination of compatibility.
NF T30-499-12*NF EN ISO 8130-12:2019 Coating powders - Part 12 : determination of compatibility
NF EN ISO 14629:2016 Céramiques techniques - Détermination de l'aptitude à l'écoulement des poudres céramiques
FD CEN/TR 17108:2017 Essais non destructifs - Bonnes pratiques d'éclairage en ressuage et magnétoscopie
NF EN ISO 10893-1:2011 Essais non destructifs des tubes en acier - Partie 1 : contrôle automatisé électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre)
NF C28-906/A1:2021 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
NF C28-906*NF EN IEC 60404-6:2018 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
NF EN IEC 60404-6:2018 Matériaux magnétiques - Partie 6 : méthodes de mesure des propriétés magnétiques des matériaux métalliques et des matériaux en poudre magnétiquement doux, aux fréquences comprises entre 20 Hz et 100 kHz, sur des éprouvettes en forme de tore
NF EN IEC 60404-6/A1:2021 Matériaux magnétiques - Partie 6 : méthodes de mesure des propriétés magnétiques des matériaux métalliques et des matériaux en poudre magnétiquement doux, aux fréquences comprises entre 20 Hz et 100 kHz, sur des éprouvettes en forme de tore
NF EN ISO 17172:2021 Céramiques techniques - Détermination des propriétés de compactage des poudres céramiques
NF T73-008:1978 Surface active agents. Powders and granules.measurement of the angle of repose.
NF B41-103:1988 Technical ceramics for thermomechanical use - Determination of the compressibility of the powders
NF T73-428*NF EN 15647:2009 Surface active agents - Determination of the dispersing effect of surfactants on powder
NF A04-315-1*NF EN 10228-1:2016 Non-destructive testing of steel forgings - Part 1 : magnetic particle inspection
NF EN 15647:2009 Agents de surface - Détermination des forces de dispersion des surfactants sur la poudre
NF A09-599*NF EN ISO 3059:2013 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
NF EN ISO 23278:2015 Contrôle non destructif des assemblages soudés - Contrôle par magnétoscopie - Niveaux d'acceptation
NF EN ISO 3059:2013 Essais non destructifs - Contrôle par ressuage et contrôle par magnétoscopie - Conditions d'observation

Professional Standard - Aviation, Magnetic Powder Inspection

HB 5883-1985 General technical requirements for magnetic chip detectors and magnetic chip detectors
HB 5441.6-1989 Performance testing of powder metallurgy products and powders Test methods for fluidity of metal powders
HB 5441.1-1989 Performance testing of powder metallurgy products and powders - Sieving method for determining particle size of metal powders
HB 5441.5-1989 Performance testing of powder metallurgy products and powders - Test method for tap density of metal powders
HB 5441.4-1989 Performance testing of powder metallurgy products and powders - Test method for bulk density of metal powders
HB 5441.2-1989 Performance testing of powder metallurgy products and powders Test method for oil content of permeable sintered metal materials
HB 5441.8-1989 Performance testing of powder metallurgy products and powders - Determination of radial crush strength of sintered metal bushings
HB 5441.7-1989 Performance testing of powder metallurgy articles and powders Test methods for density and porosity of permeable sintered metal materials
HB 5441.9-1989 Performance testing of powder metallurgy products and powders Determination of apparent hardness of sintered metal materials (except cemented carbide)
HB 5441.3-1989 Performance testing of powder metallurgy products and powders Test method for tensile strength of sintered metal materials (except cemented carbide)

YU-JUS, Magnetic Powder Inspection

JUS H.B8.766-1982 Testing of pesticides. Flowability of povvders
JUS C.N3.001-1986 Povvder metallurgy. Hardmetals. Sampling and testing ofpovvders using sintered testpieces
JUS C.A2.030-1990 Metaliic potfders, excluding powders for hardmetals. Determlnation of compactibi-llty (compresslbllity) in uniaxlal compression
JUS C.X5.025-1990 Magnetic materlals. Preparation of specimens for the checking of quality and testing of magnetic properties
JUS C.K5.025-1979 Magnetic sheets. Methods of testing. Preparation of specimens for the checking ofquality and testing of magnetic properties.

SE-SIS, Magnetic Powder Inspection

SIS SS 11 50 81-1982 Powder metallurgy - Hardmetals - Determination of the magnetization coercivity
SIS SS 11 10 31-1982 Powder metallurgy - Metallic powders - Determination of flowability
SIS SS 11 29 10-1982 Powder metallurgy - Ductile metallic powders - Determination of compactibility (compressibility)
SIS SS 11 44 01-1986 Non-destructive testing — Magnetic particle fiaw detection - Ferro-magnetic materials
SIS 11 29 10-1963 Determining the compressibility of ductile metal pocders
SIS 11 40 54-1972 Non-destructive testing. Magnetic particle flaw detection. Terminology
SIS SS 11 40 54-1981 Non-destructive testing - Magnetic particle flaw detection - Terminology
SIS 11 29 10-1975 Metallic powders. Determ i nation of compactibility (compressibility) in uniaxial compression

Professional Standard - Machinery, Magnetic Powder Inspection

JB/T 6646-1993 Powder metallurgy physical performance testing specification
JB/T 6061-2007 Non-destructive testing.Magnetic particle testing of welds
JB/T 8468-2014 Magnetic particle testing for steel forgings
JB/T 6063-2006 Non-destructive testing.Materials for magnetic particle testing
JB/T 6065-2004 Test piece for non-destructive testing magnetic particle testing
JB/T 6066-2004 Ring test block for non-destructive testing magnetic particle testing
JB/T 6439-2008 Methods of magnetic examination for valves
JB/T 9744-2010 Internal combustion engines-Magnetic particle inspection for parts and components
JB/T 8290-2011 Non-destructive testing instruments.Magnetic particle flaw detectors
JB/T 9628-2017 Magnetic Particle Inspection Method for Steam Turbine Blades
JB/T 4730.4-2005 Nondestructive testing of pressure equipments - Part 4: Magnetic particle testing
JB/T 6729-2007 Internal combustion engines.Magnetic particle inspection for crankshafts and camshafts
JB/T 6912-2008 Magnetic particle testing. Non-destructive testing for parts of pump
JB/T 6721.2-2007 Internal combustion engines.connecting-rods.Part 2: Magnetic particle inspection
JB/T 6912-1993 Non-destructive testing of pump product parts Magnetic particle testing
JB/T 6912-2019 Non-destructive testing of pump product parts Magnetic particle testing
JB/T 7411-2012 Non-destructive testing instruments.Specification of electricity magnetic yoke magnetic particle flaw detector
JB/T 7367-2013 Magnetic particle inspection for helical compression springs
JB/T 8118.3-2011 Internal combustion engines.Piston pins.Part 3: Magnetic particle inspection

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Magnetic Powder Inspection

GJB 2028A-2007 Magnetic particle testing

Military Standard of the People's Republic of China-General Armament Department, Magnetic Powder Inspection

GJB 2028A-2019 Magnetic particle testing
GJB 593.3-1988 Nondestructive Testing Quality Control Specification Magnetic Particle Inspection
GJB 4602-1992*GJBz 20105-1992 Aviation maintenance non-destructive testing quality control magnetic particle testing

KR-KS, Magnetic Powder Inspection

KS D 0213-2018(英文版) Method for magnetic particle testing of ferromagnetic materials and classification of magnetic particle indication
KS B ISO 12707-2020 Non-destructive testing — Magnetic particle testing — Vocabulary
KS B ISO 17638-2023 Non destructive testing of welds Magnetic particle testing
KS B ISO 9934-2-2022 Non-destructive testing — Magnetic particle testing —Part 2: Detection media
KS B ISO 9934-3-2022 Non-destructive testing — Magnetic particle testing — Part 3: Equipment
KS B ISO 9934-1-2022 Non-destructive testing — Magnetic particle testing —Part 1: General principles
KS B ISO 9934-1-2016 Non－destructive testing－Magnetic particle testing－Part 1：General principles
KS B ISO 3059-2022 Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions
KS B ISO 9934-2-2017 Non-destructive testing — Magnetic particle testing — Part 2: Detection media
KS B ISO 23278-2023 Non-destructive testing of welds — Magnetic particle testing of welds — Acceptance levels
KS M ISO 8130-6-2016 Coating powders－Part 6：Determination of gel time of thermosetting coating powders at a given temperature
KS M ISO 8130-6-2021 Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature
KS D ISO 11873-2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method

IN-BIS, Magnetic Powder Inspection

Korean Agency for Technology and Standards (KATS), Magnetic Powder Inspection

KS D 2363-1999 50 Nickel－50 lron powder metallurgy(P/M) soft magnetic alloys
KS B ISO 12707:2020 Non-destructive testing — Magnetic particle testing — Vocabulary
KS B ISO 9934-2:2017 Non-destructive testing — Magnetic particle testing — Part 2: Detection media
KS B ISO 9934-2:2022 Non-destructive testing — Magnetic particle testing —Part 2: Detection media
KS B ISO 9934-1-2016(2021) Non－destructive testing－Magnetic particle testing－Part 1：General principles
KS B ISO 9934-3:2022 Non-destructive testing — Magnetic particle testing — Part 3: Equipment
KS B ISO 9934-1:2016 Non－destructive testing－Magnetic particle testing－Part 1：General principles
KS B ISO 9934-1:2022 Non-destructive testing — Magnetic particle testing —Part 1: General principles
KS B ISO 3059:2022 Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions
KS M ISO 8130-5-2008(2019) Coating powders－Part 5：Determination of flow properties of a powder/air mixture
KS D ISO 3927-2012(2022) Metallic powders, excluding powders for hardmetals－Determination of compactibility(compressibility) in uniaxial compression
KS B ISO 23278-2007(2012) Non-destructive testing of welds－Magnetic particle testing of welds－Acceptance levels
KS D ISO 3927:2012 Metallic powders, excluding powders for hardmetals－Determination of compactibility(compressibility) in uniaxial compression
KS D ISO 3927-2012(2017) Metallic powders, excluding powders for hardmetals－Determination of compactibility(compressibility) in uniaxial compression
KS C IEC 60404-6:2002 Magnetic materials-Part 6:Methods ofmeasurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and E4
KS M ISO 8130-12-2008(2019) Coating powders－Part 12：Determination of compatibility
KS M ISO 8130-6:2021 Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature
KS D ISO 10070-2004(2019) Metallic powders－Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
KS M ISO 4324-2007(2012) Surface active agents－Powders and granules－Measurement of the angle of repose
KS D ISO 11873:2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method
KS D ISO 11873-2011(2016) Hardmetals－Determination of sulfur and carbon contents in cobalt metal powders－Infrared detection method

Professional Standard - Electron, Magnetic Powder Inspection

SJ/T 10216-1991 Determination of density for magnetic oxide powders.Determination of tap density
SJ/T 10215-1991 Determination of density for magnetic oxide powders.Determination of apparent density:Oscillating funnel method

IT-UNI, Magnetic Powder Inspection

UNI 7062-1972
UNI 5822-1978
UNI 5826-1966
UNI EN ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture
UNI EN ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
UNI EN ISO 17200:2021 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Magnetic Powder Inspection

GB/T 23906-2009(英文版) Nondestructive testing—Rings for magnetic particle testing
GB/T 12604.5-2008 Non-destructive testing.Terminology.Terms used in magnetic particle testing
GB/T 12604.5-1990 Terminology for nondestructive testing--Magnetic particle testing
GB/T 26951-2011 Non-destructive testing of welds.Magentic particle testing
GB/T 23907-2009(英文版) Nondestructive testing—Shims for magnetic particle testing
GB/T 9444-2007 Magnetic particle testing for steel castings
GB/T 23907-2009 Non-destructive testing.Shims for magnetic particle testing
GB/T 5509-2008 Inspection of grain and oils.Determination of magnetic metals content of flours
GB/T 24606-2009 Rolling bearings.Non-destructive testing-Magnetic particle testing
GB/T 41978-2022 Additive manufacturing—Test method for hollow particle ratio of metal powders
GB/T 23906-2009 Non-destructive testing.Rings for magnetic particle testing
GB/T 42673-2023 Non-destructive testing of steel tubes Magnetic particle testing of ferromagnetic seamless and welded steel tubes for surface imperfections
GB/T 15822.2-2005 Non-destructive testing.Magnetic particle testing.Part 2:Detection media
GB/T 21782.5-2010 Coating powders.Part 5:Determination of flow properties of a powder/air mixture
GB/T 15822.1-2005 Non-destructive testing.Magnetic particle testing.Part 1:General principles
GB/T 15822.3-2005 Non-destructive testing.Magnetic particle testing.Part 3:Equipment
GB/T 5097-2005 Non-destructive testing-Penetrant testing and magnetic particle testing-Viewing conditions
GB/T 5509-1985 Inspection of grain and oilseeds--Methods for determination of magnetic metals content of flours
GB/T 21776-2008 Standard guide for testing coating powders and powders coatings
GB/T 26952-2011 Non-destructive testing of welds.Magnetic particle testing of welds.Acceptance levels
GB/T 1481-1998 Metallic powders (excluding powders for hardmetals)--Determination of compressibility in uniaxial compression
GB/T 1481-2022 Metallic powders，excluding powders for hardmetals—Determination of compressibility in uniaxial compression
GB/T 1481-2012 Metallic powders (excluding powders for hardmetals).Determination of compressibility in uniaxial compression
GB/T 3658-2022 Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
GB/T 43096-2023 Determination of external specific surface area by powder layer permeability test under steady flow conditions of metal powder
GB/T 21782.12-2010 Coating powders.Part 12:Determination of compatibility
GB/T 21837-2008 Practice for electromagnetic examination of ferromagnetic steel wire rope
GB/T 21782.11-2010 Coating powders.Part 9:Inclined-plane flow test

Shaanxi Provincial Standard of the People's Republic of China, Magnetic Powder Inspection

DB61/T 1337-2020 Spherical Metal Powder Irregular Powder Detection Method
DB61/T 1218-2018 Wet continuous method fluorescent magnetic particle detection

European Committee for Standardization (CEN), Magnetic Powder Inspection

EN 1369:2012 Founding - Magnetic particle testing
EN ISO 12707:2016 Non-destructive testing - Magnetic particle testing - Vocabulary
EN ISO 3059:2012 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012)
prEN 23927-1992 Metallic powders, excluding powders for hardmetals; determination of compactibility (compressibility) in uniaxial compression (ISO 3927:1985)
EN ISO 3927:2017 Metallic powders@ excluding powders for hardmetals - Determination of compressibility in uniaxial compression
EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)
EN ISO 9934-2:2015 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015)
PD CEN/TR 16638:2014 Non-destructive testing - Penetrant and magnetic particle testing using blue light
EN 23927:1993 Metallic Powders, Excluding Powders for Hardmetals - Determination of Compactibility (Compressibility) in Uniaxial Compression (ISO 3927: 1985)
EN ISO 9934-3:2015 Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015)
EN 10228-1:1999 Non-Destructive Testing of Steel Forgings - Part 1: Magnetic Particle Inspection
EN ISO 10893-5:2011 Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011)
EN ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)
EN ISO 8130-6:2010 Coating Powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
EN ISO 9934-1:2015 Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2015)
PD CEN/TR 17108:2017 Non-destructive testing - Lighting in penetrant and magnetic particle testing@ good practice
EN ISO 17638:2016 Non-destructive testing of welds - Magnetic particle testing
EN ISO 9934-1:2016 Non-Destructive Testing - Magnetic Particle Testing - Part 1: General Principles
EN ISO 10070:2019 Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019)
EN ISO 3927:2001 Metallic Powders, Excluding Powders for Hardmetals - Determination of Compressibility in Uniaxial Compression ISO 3927:2001; Supersedes EN 23927:1993
EN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020)

Lithuanian Standards Office , Magnetic Powder Inspection

LST EN 1369-2013 Founding - Magnetic particle testing
LST EN ISO 17638:2010 Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2003)
LST EN ISO 9934-2:2004 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2002)
LST EN ISO 3059:2013 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012)
LST EN ISO 8130-5:2011 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992)
LST EN ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
LST EN ISO 9934-3:2002 Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2002)
LST EN ISO 9934-1:2002 Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2001)
LST EN ISO 9934-1:2002/A1:2004 Non-destructive testing - Magnetic particles testing - Part 1: General principles (ISO 9934-1:2003)
LST EN 1330-7-2005 Non-destructive testing - Terminology - Part 7: Terms used in magnetic particle testing
LST EN ISO 23278:2010 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO 23278:2006)
LST EN 10228-1-2000 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
LST EN ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)
LST EN 60404-6-2004 Magnetic materials. Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003)
LST EN ISO 8130-12:2011 Coating powders - Part 12: Determination of compatibility (ISO 8130-12:1998)

Danish Standards Foundation, Magnetic Powder Inspection

DS/EN 1369:2012 Founding - Magnetic particle testing
DS/EN ISO 9934-2:2003 Non-destructive testing - Magnetic particle testing - Part 2: Detection media
DS/EN ISO 9934-3:2002 Non-destructive testing - Magnetic particle testing - Part 3: Equipment
DS/EN ISO 3059:2013 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
DS/EN ISO 8130-5:2011 Coating powders - Part 5: Determination of flow properties of a powder/air mixture
DS/ISO 8130-5:2021 Coating powders – Part 5: Determination of flow properties of a powder/air mixture
DS/EN ISO 17638:2010 Non-destructive testing of welds - Magnetic particle testing
DS/EN ISO 9934-1/A1:2004 Non-destructive testing - Magnetic particle testing - Part 1: General principles
DS/EN ISO 9934-1:2002 Non-destructive testing - Magnetic particle testing - Part 1: General principles
DS/EN 23927:1994 Metallic powders, excluding powders for hardmetals. Determination of compactibility (compressibility) in uniaxial compression
DS/EN ISO 8130-5:2021 Coating powders – Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
DS/EN ISO 23278:2010 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels
DS/EN ISO 8130-6:2011 Coating Powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
DS/ISO 8130-6:2021 Coating powders – Part 6: Determination of gel time of thermosetting coating powders at a given temperature
DS/EN ISO 8130-12:2011 Coating powders - Part 12: Determination of compatibility
DS/EN 60404-6:2003 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
DS/EN IEC 60404-6:2021 Magnetic materials – Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
DS/EN 1330-7:2005 Non-destructive testing - Terminology - Part 7: Terms used in magnetic particle testing
DS/EN 10228-1:2002 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
DS/ISO/TS 17200:2013 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
DS/EN ISO 8130-6:2021 Coating powders – Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)
DS/ISO/TS 11931:2013 Nanotechnologies - Nanoscale calcium carbonate in powder form - Characteristics and measurement

AENOR, Magnetic Powder Inspection

UNE-EN 1369:2013 Founding - Magnetic particle testing
UNE-EN ISO 17638:2017 Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)
UNE-EN ISO 3059:2013 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012)
UNE-EN ISO 8130-5:2011 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992)
UNE-EN 60404-6:2004 Magnetic materials -- Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
UNE-EN ISO 9934-1:2017 Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016)
UNE 55547:1981 SURFACE ACTIVE AGENTS. POWDERS AND GRANULES. MEASUREMENT OF THE ANGLE OF REPOSE
UNE-EN ISO 8130-12:2011 Coating powders - Part 12: Determination of compatibility (ISO 8130-12:1998)

British Standards Institution (BSI), Magnetic Powder Inspection

BS EN 1369:2012 Founding. Magnetic particle testing
BS EN ISO 12707:2016 Non-destructive testing. Magnetic particle testing. Vocabulary
BS EN ISO 9934-2:2015 Tracked Changes. Non-destructive testing. Magnetic particle testing. Detection media
BS EN ISO 17638:2010 Non-destructive testing of welds. Magnetic particle testing
BS EN ISO 17638:2009 Non-destructive testing of welds - Magnetic particle testing
BS EN ISO 8130-5:2010 Coating powders. Determination of flow properties of a powder/air mixture
BS EN ISO 9934-3:2015 Tracked Changes. Non-destructive testing. Magnetic particle testing. Equipment
BS EN ISO 8130-5:2021 Tracked Changes. Coating powders. Determination of flow properties of a powder/air mixture
BS EN ISO 17638:2016 Tracked Changes. Non-destructive testing of welds. Magnetic particle testing
BS EN ISO 9934-1:2016 Tracked Changes. Non-destructive testing. Magnetic particle testing. General principles
BS EN ISO 8130-6:1998 Coating powders. Determination of gel time of thermosetting coating powders at a given temperature
BS EN ISO 8130-6:2010 Coating powders. Determination of gel time of thermosetting coating powders at a given temperature
BS EN 60404-6:2003 Magnetic materials. Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
BS EN ISO 3927:2002 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
BS EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
BS EN IEC 60404-6:2018+A1:2021 Magnetic materials - Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
BS PD CEN/TS 17108:2017 Non-destructive testing. Lighting in penetrant and magnetic particle testing, good practice
BS PD CEN/TR 16638:2014 Non-destructive testing. Penetrant and magnetic particle testing using blue light
PD CEN/TS 17108:2017 Non-destructive testing. Lighting in penetrant and magnetic particle testing, good practice
BS EN ISO 8130-6:2021 Tracked Changes. Coating powders. Determination of gel time of thermosetting coating powders at a given temperature
20/30421045 DC BS EN ISO 8130-5. Coating powders. Part 5. Determination of flow properties of a powder/air mixture
BS EN ISO 8130-12:2019 Tracked Changes. Coating powders. Determination of compatibility
BS EN ISO 23278:2015 Tracked Changes. Non-destructive testing of welds. Magnetic particle testing. Acceptance levels
BS EN 725-11:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination of densification on natural sintering
21/30415001 DC BS IEC 63300. Test methods for electrical and magnetic properties of magnetic powder cores
BS EN ISO 10893-5:2011 Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
20/30419391 DC BS EN ISO 8130-6. Coating powders. Part 6. Determination of gel time of thermosetting coating powders at a given temperature
20/30403973 DC BS EN 60404-6 AMD1. Magnetic materials. Part 6 Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
BS EN 10228-1:2016 Tracked Changes. Non-destructive testing of steel forgings. Magnetic particle inspection
BS EN ISO 10070:2019 Metallic powders. Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
BS EN ISO 3059:2012 Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
BS EN 10246-12:2000 Non-destructive testing of steel tubes - Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections

German Institute for Standardization, Magnetic Powder Inspection

DIN EN 1369:2013-01 Founding - Magnetic particle testing; German version EN 1369:2012
DIN EN ISO 12707:2016-08 Non-destructive testing - Magnetic particle testing - Vocabulary (ISO 12707:2016); German version EN ISO 12707:2016
DIN EN ISO 17638:2017-03 Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016); German version EN ISO 17638:2016
DIN EN ISO 9934-2:2015-12 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015); German version EN ISO 9934-2:2015
DIN EN ISO 9934-3:2015-12 Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015); German version EN ISO 9934-3:2015
DIN EN ISO 23278:2015-06 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015); German version EN ISO 23278:2015
DIN EN ISO 3059:2013-03 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012); German version EN ISO 3059:2012
DIN EN ISO 8130-5:2021-10 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021); German version EN ISO 8130-5:2021
DIN EN ISO 3927:2018-01 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017); German version EN ISO 3927:2017
DIN CEN/TR 16638:2014-05*DIN SPEC 19273:2014-05 Non-destructive testing - Penetrant and magnetic particle testing using blue light; German version CEN/TR 16638:2014
DIN EN ISO 9934-1:2017-03 Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016); German version EN ISO 9934-1:2016
DIN EN ISO 8130-12:2019-08 Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019); German version EN ISO 8130-12:2019
DIN EN ISO 8130-6:2021-10 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021); German version EN ISO 8130-6:2021
DIN EN ISO 8130-5:2020 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO/DIS 8130-5:2020); German and English version prEN ISO 8130-5:2020
DIN EN 1369:2013 Founding.Magnetic particle testing; German version EN 1369:2012
DIN EN 60404-6:2004 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20
DIN 51082:2003-02 Testing of ceramic raw materials and ceramic materials - Determination of pH value of suspensions of non-soluble powders
DIN EN ISO 12707:2016 Non-destructive testing - Magnetic particle testing - Vocabulary (ISO 12707:2016); German version EN ISO 12707:2016
DIN EN 10228-1:2016-10 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection; German version EN 10228-1:2016
DIN ISO 4324:1983-12 Surface active agents; powders and granules; measurement of the angle of repose
DIN EN ISO 17200:2020-12 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020); German version EN ISO 17200:2020
DIN EN ISO 8130-6:2020 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO/DIS 8130-6:2020); German and English version prEN ISO 8130-6:2020
DIN EN IEC 63300:2022-03 Test methods for electrical and magnetic properties of magnetic powder cores (IEC 51/1368/CD:2021); Text in German and English / Note: Date of issue 2022-02-25
DIN EN ISO 10070:2020-04 Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019); German version EN ISO 10070:2019
DIN EN 60404-6 Berichtigung 1:2009 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20
DIN EN 15647:2009-04 Surface active agents - Determination of the dispersing effect of surfactants on powder; German version EN 15647:2009
DIN EN ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021); German version EN ISO 8130-5:2021
DIN EN ISO 8130-12:2019 Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019)

Society of Automotive Engineers (SAE), Magnetic Powder Inspection

SAE AMS7510B-2006 Magnets, Rare-Earth/ Cobalt, Permanent Powder-Metallurgy Product
SAE AMS7510-1977 MAGNETS, RARE-EARTH/COBALT, PERMANENT Powder-Metallurgy Product
SAE AMS7510A-1994 MAGNETS,RARE-EARTH/COBALT,PERMANENT Powder-Metallurgy Product
SAE AMS3044F-2008 Magnetic Particles, Fluorescent, Wet Method, Dry Powder
SAE AMS3042E-2008 Magnetic Particles, Nonfluorescent, Wet Method, Dry Powder
SAE AMS2641C-2015 Vehicle, Magnetic Particle Inspection Petroleum Base
SAE AMS2641A-2007 VEHICLE, MAGNETIC PARTICLE INSPECTION Petroleum Base
SAE AMS2641D-2020 Vehicle, Magnetic Particle Inspection Petroleum Base
SAE AMS2308-1994 Magnetic Rubber Inspection
SAE AS5371-2013 Reference Standards Notched Shims for Magnetic Particle Inspection

International Organization for Standardization (ISO), Magnetic Powder Inspection

ISO 12707:2016 Non-destructive testing - Magnetic particle testing - Vocabulary
ISO 4986:2010 Steel castings - Magnetic particle inspection
ISO 8130-5:1992 Coating powders; part 5: determination of flow properties of a powder/air mixture
ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture
ISO 3927:1977 Metallic powders, excluding powders for hardmetals — Determination of compactibility (compressibility) in uniaxial compression
ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
ISO 3927:2017 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
ISO 9934-1:2016 Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 3927:2001 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
ISO 3927:1985 Metallic powders, excluding powders for hardmetals; Determination of compactibility (Compressibility) in uniaxial compression
ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
ISO 8130-6:1992 Coating powders; part 6: determination of gel time of thermosetting coating powders at a given temperature
ISO 8130-12:2019 Coating powders — Part 12: Determination of compatibility
ISO 10070:2019 Metallic powders — Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
ISO 10070:1991 Metallic powder; determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
ISO 8130-6:1992/Amd 1:1998 Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature — Amendment 1
ISO 3059:2012 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
ISO 10893-5:2011 Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections

国家市场监督管理总局、中国国家标准化管理委员会, Magnetic Powder Inspection

GB/T 12604.5-2020 Non-destructive testing—Terminology—Magnetic particle testing
GB/T 24606-2021 Rolling bearings—Non-destructive testing—Magnetic particle testing
GB/T 9444-2019 Steel and iron castings—Magnetic particle inspection
GB/T 5097-2020 Non-destructive testing—Penetrant testing and magnetic particle testing—Viewing conditions
GB/T 40067-2021 Microstructure and defect determination of tungsten carbide powder
GB/T 39696-2020 Determination of flowability of fine ceramic powders—Calibrated funnel
GB/T 38882-2020 Non-destructive testing—Testing method for wall-thickness loss of ferromagnetic tubes using magnetic flux leakage

ES-UNE, Magnetic Powder Inspection

UNE-EN ISO 12707:2016 Non-destructive testing - Magnetic particle testing - Vocabulary (ISO 12707:2016)
UNE-EN ISO 9934-2:2016 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015)
UNE-EN ISO 9934-3:2016 Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015)
UNE-EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015)
UNE-EN ISO 8130-5:2022 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
UNE-EN ISO 3927:2018 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017)
UNE-CEN/TR 16638:2014 Non-destructive testing - Penetrant and magnetic particle testing using blue light (Endorsed by AENOR in August of 2014.)
UNE-EN ISO 8130-12:2020 Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019)
UNE-EN ISO 8130-6:2022 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)
UNE-EN IEC 60404-6:2018/A1:2021 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
UNE-EN IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
UNE-EN IEC 60404-6:2018/AC:2018-12 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
UNE-EN 10228-1:2016 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
UNE-EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020) (Endorsed by Asociación Española de Normalización in November of 2020.)
UNE-EN ISO 10070:2020 Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019)

未注明发布机构, Magnetic Powder Inspection

NF A89-550*NF EN ISO 17638:2016 Non-destructive testing of welds - Magnetic particle testing
BS EN 1290:1998(2004) Non - destructive testing of welds — Magnetic particle testing of welds
BS EN 1291:1998(2004) Non - destructive testing of welds — Magnetic particle testing of welds — Acceptance levels

Japanese Industrial Standards Committee (JISC), Magnetic Powder Inspection

JIS Z 2321:1993 AC yoke magnet for magnetic particle testing
JIS Z 2502:2000 Metallic powders -- Determination of flowability by means of a calibrated funnel (Hall flowmeter)
JIS Z 2502:2012 Metallic powders -- Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
JIS Z 2508:2004 Metallic powders, excluding powders for hardmetals -- Determination of compressibility in uniaxial compression

CZ-CSN, Magnetic Powder Inspection

CSN 66 8102 Cast.26-1997
CSN ISO 3927:1993 Metallic powders. Determination of compactibility
CSN 42 0890 Cast.6-1982 Determination of compressibility of metal powders
CSN 66 8102 Cast.6-1978 Smokeless powders. Methods of testing. Determination of hygroscopicity
CSN 66 8102 Cast.26-1978 Smokeless powders. Methods of testing. Determination of centralites
CSN 66 8102 Cast.10-1997
CSN 66 8102 Cast.33-1997
CSN 66 8029-1973 Smokeless powders Stability test at 100 °C
CSN 66 8102 Cast.31-1997
CSN 02 3420-1975 Regulations for testing of slipping pro-perties of oilretaining metal powder bearings
CSN 66 8102 Cast.30-1997
CSN 42 0890 Cast.15-1986 Testing of metal powders. Gravimetric method for detBrmination of acid-insoluble residue content
CSN EN 50 017-1993 Electrical apparatus for potentially explosive atmospheres. Powder filling "q"

RU-GOST R, Magnetic Powder Inspection

GOST R 51063-1997 Inert powder. Methods of testing
GOST R ISO 9934-2-2011 Non-destructive testing. Magnetic particle testing. Part 2. Detection media
GOST ISO 8130-6-2002 Coating powders. Determination of gel time of thermosetting coating powders at a given temperature
GOST 30550-1998 Metallic of powders. Determination of acid-insoluble content in iron, copper, tin and bronze powders
GOST R ISO 9934-1-2011 Non-destructive testing. Magnetic particle testing. Part 1. General principles
GOST R ISO 3059-2015 Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
GOST R 53700-2009 Non-destructive testing. Magnetic particle testing. Part 3: Equipment
GOST 7109-1973 Pyroxylin powders. Methods of testing chemical stability
GOST 26614-1985 Powder antifriction materials. Test method for determination of tribotechnical properties
GOST R ISO 10893-5-2016 Seamless and welded steel tubes. Part 5. Magnetic particle inspection of ferromagnetic tubes for the detection of surface imperfections
GOST 20899-1998 Metallic powders. Determination of flowability by means of a calibrated funnel (Hall flowmeter)
GOST 20899-1975 Metal powders. Method of yield determination

VN-TCVN, Magnetic Powder Inspection

TCVN 4396-1986 Non-destructive testing.Method of magnetic particle testing
TCVN 5880-2010 Non-destructive testing.Penetrant testing and magnetic particle testing.Viewing conditions

Professional Standard - Civil Aviation, Magnetic Powder Inspection

MH/T 3008-2012 Nondestructive testing for aircraft.Magnetic paticle testing
MH/T 3008-2004 Nondestructive testing for aircraft--Magnetic particle testing

Professional Standard - Nuclear Industry, Magnetic Powder Inspection

EJ/T 838-1994 Sinterability Test of Uranium Dioxide Powder

American National Standards Institute （ANSI), Magnetic Powder Inspection

ANSI/ASTM A839:1997 Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications

American Society for Testing and Materials (ASTM), Magnetic Powder Inspection

ASTM A811-15(2022) Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques
ASTM E709-14 Standard Guide for Magnetic Particle Testing
ASTM E1444/E1444M-12 Standard Practice for Magnetic Particle Testing
ASTM E1444/E1444M-16 Standard Practice for Magnetic Particle Testing
ASTM E3024/E3024M-19e1 Standard Practice for Magnetic Particle Testing for General Industry
ASTM E3024/E3024M-19 Standard Practice for Magnetic Particle Testing for General Industry
ASTM E1444/E1444M-11 Standard Practice for Magnetic Particle Testing
ASTM D5158-98 Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D5158-98(2005) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM E3024/E3024M-22 Standard Practice for Magnetic Particle Testing for General Industry
ASTM E1444/E1444M-22 Standard Practice for Magnetic Particle Testing for Aerospace
ASTM E3024/E3024M-22a Standard Practice for Magnetic Particle Testing for General Industry
ASTM E1444/E1444M-22a Standard Practice for Magnetic Particle Testing for Aerospace
ASTM E3024/E3024M-16 Standard Practice for Magnetic Particle Testing for General Industry
ASTM E3022-18 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
ASTM B212-09 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM D5861-95(2002) Standard Guide for Significance of Particle Size Measurements of Coating Powders
ASTM D4217-91(1995)e1 Standard Test Method for Gel Time of Thermosetting Coating Powder
ASTM D4217-02 Standard Test Method for Gel Time of Thermosetting Coating Powder

CN-STDBOOK, Magnetic Powder Inspection

图书 A-4851 Magnetic Particle Testing of Bearing Parts

RO-ASRO, Magnetic Powder Inspection

STAS 10956/3-1977 Metal powders ALUMINIUM POWDERS Determination of active aluminium content
STAS 9089-1980 METAL POWDERS Determination of compressibility
STAS SR EN 23927-1994 Metallic powders, excluding powders for hardmetals. Determination of compactibility (compressibility) in uniaxial compression
STAS SR ISO 3049:1996 Gypsum plasters - Determination of physical properties of powder
STAS SR ISO 8130-5:1992 Coating powders — Part 5: Determination of flow properties of a powder/air mixture

PL-PKN, Magnetic Powder Inspection

PN-EN ISO 12707-2016-07 P Non-destructive testing -- Magnetic particle testing -- Vocabulary (ISO 12707:2016)
PN C83602-11-1986 Fire extinquishings Fire extinquishings powders Determination of repellency
PN C04840-1989 Surface active agents Powders and granules Measurement of the angle of repose
PN C04654-1970 Pesficides Suspension s?abili?y of water-dispersible powders by method wi?h cylinder

Defense Logistics Agency, Magnetic Powder Inspection

DLA A-A-59230 VALID NOTICE 2-2009 Fluid, Magnetic Particle Inspection, Suspension

SAE - SAE International, Magnetic Powder Inspection

SAE AMS2641-1988 VEHICLE@ MAGNETIC PARTICLE INSPECTION Petroleum Base
SAE AS7114/2A-2008 NADCAP Requirements for Nondestructive Testing Magnetic Particle Survey
SAE AMS2308A-2005 Magnetic Rubber Inspection
SAE AS5371A-2017 Reference Standards Notched Shims for Magnetic Particle Inspection
SAE MAM2301-1996 Cleanliness@ Aircraft Quality Steel Magnetic Particle Inspection Procedure Metric (SI) Measurement
SAE AMS2309A-2007 Magnetic Rubber Inspection Material

Indonesia Standards, Magnetic Powder Inspection

SNI ISO 9934-2:2012 Non-destructive testing - Magnetic particle testing - Part 2: Detection media
SNI ISO 9934-3:2012 Non-destructive testing - Magnetic particle testing - Part 3: Equipment
SNI ISO 9934-1:2012 Non-destructive testing - Magnetic particle testing - Part 1: General principles

Standard Association of Australia （SAA）, Magnetic Powder Inspection

AS ISO 9934.2:2020 Non-destructive testing — Magnetic particle testing, Part 2: Detection media
AS ISO 9934.3:2020 Non-destructive testing — Magnetic particle testing, Part 3: Equipment
AS 1171:1998 Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures

FI-SFS, Magnetic Powder Inspection

SFS 3286-1975 RIKKOMATON AINEENKOETUS. MAGNEETTIJAUHETARKASTUS.YLEISET OHJEET

工业和信息化部, Magnetic Powder Inspection

JB/T 13936-2020 Technical requirements for magnetizing equipment for non-destructive testing instruments and magnetic particle testing
YB/T 4932-2021 Magnetic particle testing method for hot-rolled steel
YS/T 1490-2021 Detection method for inclusion content in nickel-based high-temperature alloy powder

CEN - European Committee for Standardization, Magnetic Powder Inspection

EN ISO 3059:2001 Non-Destructive Testing - Penetrant Testing and Magnetic Particle Testing - Viewing Conditions

ZA-SANS, Magnetic Powder Inspection

SANS 3059:2004 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions

CO-ICONTEC, Magnetic Powder Inspection

ICONTEC 1071-1981

GOSTR, Magnetic Powder Inspection

GOST ISO 17638-2018 Non-destructive testing of welds. Magnetic particle testing

Professional Standard - Energy, Magnetic Powder Inspection

NB/T 47013.4-2015 Nondestructive testing of pressure equipments.Part 4: Magnetic particle testing
NB/T 47013.4-2015 Nondestructive Testing of Pressure Equipment Part 4: Magnetic Particle Testing
NB/T 20003.5-2010 Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 5: Magnetic particle testing
NB/T 20003.5-2021 Non-destructive testing of nuclear island machinery and equipment in nuclear power plants Part 5: Magnetic particle testing

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Magnetic Powder Inspection

GB/T 34370.3-2017 Nondestructive testing of amusement equipments—Part 3：Magnetic particle testing

International Electrotechnical Commission (IEC), Magnetic Powder Inspection

IEC 60404-6:2018+AMD1:2021 CSV Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specim
IEC 60404-6:2018 RLV Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specim
IEC 60404-6:2018/AMD1:2021 Amendment 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use
IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
IEC 60404-6:2003/COR1:2009 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens; Corrigendum 1
IEC 60404-6:2003 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens
IEC 60404-6:2021 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

BE-NBN, Magnetic Powder Inspection

NBN-EN 23927-1993 Metallic powders, excluding powders for hardmetals. Determination of compactibility (Compressibility) in uniaxial compression (ISO 3927: 1985)
NBN V 21-033-1983 Dried milk - Determination of the phosphatase activity

Group Standards of the People's Republic of China, Magnetic Powder Inspection

T/CAAMM 17-2018 Magnetic Particle Testing Method for Tractor Parts
T/CNEA 103.5-2021 PWR pressure boundary components—Non-destructive testing— Part5:Magnetic particle testing

CH-SNV, Magnetic Powder Inspection

SN EN ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
SN EN ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)

Professional Standard - Railway, Magnetic Powder Inspection

TB/T 1558.4-2010 Non.destructive testing of welding for rolling stock Part 4:Magnetic particle testing
TB/T 3575.1-2022 Non-destructive testing of rolling stock forged steel parts Part 1: Magnetic particle testing
TB/T 3256.3-2011 Non-destructive testing of in-service components for locomotive.Part 3:Magnetic particle testing of wheelsets

国家铁路局, Magnetic Powder Inspection

TB/T 3568.1-2021 Railway nondestructive testing materials Part 1: Magnetic particle testing materials
TB/T 1558.4-2018 Non-destructive testing of rolling stock welds Part 4: Magnetic particle testing

API - American Petroleum Institute, Magnetic Powder Inspection

API REPORT 90-61-1991 Recommended Practice for Underwater Magnetic Particle In-Service Weld Inspection of Offshore Fixed Platforms and Guidelines for Qualification of Magnetic Particle Inspector Divers

NL-NEN, Magnetic Powder Inspection

NEN-ISO 3927:1993 Metallic powders, excluding powders for hardmetals. Determiantion of compactibility (compressibility) in uniaxial compression (ISO 3927:1985)

CU-NC, Magnetic Powder Inspection

NC 27-19-1987 Surface-Active Agents. Determination of Detersive Power. Testing Methods
NC 27-18-1987 Surfactants. Ilumectant Power Determination. Testing Methods

工业和信息化部/国家能源局, Magnetic Powder Inspection

JB/T 12727.4-2016 Non-destructive testing instrument specimens Part 4: Specimens for magnetic particle testing
JB/T 5442-2017 Magnetic particle testing of important parts of positive displacement compressors

European Committee for Electrotechnical Standardization（CENELEC）, Magnetic Powder Inspection

EN 60404-6:2003 Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
EN IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

Professional Standard-Ships, Magnetic Powder Inspection

CB/T 3958-2004 Magnetic particle testing, penetrant testing process and quality classification of ship steel welds

Professional Standard - Petroleum, Magnetic Powder Inspection

SY/T 6858.3-2012 Nondestructive testing method for OCTG.Part 3:Magnetic particle testing for drilling tool thread
SY 6858.3-2012 Non-destructive testing methods for oil well tubing - Part 3: Magnetic particle testing of drilling tool threads
SY/T 5448-1992 Non-destructive testing method for oil well tubular

PH-BPS, Magnetic Powder Inspection

PNS ISO 17200:2021 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements

海关总署, Magnetic Powder Inspection

SN/T 5346-2021 Determination of Volatile Organic Compounds (VOC) in Powder Coatings

AT-ON, Magnetic Powder Inspection

OENORM EN ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)

Professional Standard - Chemical Industry, Magnetic Powder Inspection

HG/T 2347.2-1992 Method for measuring magnetic performance of γ·Fe(index 2)O(index 3) magnetic powder

Guangdong Provincial Standard of the People's Republic of China, Magnetic Powder Inspection

DB44/T 1654-2015 Nanotechnology - Characterization and Measurement of Powdered Nanoparticles

国家能源局, Magnetic Powder Inspection

SY/T 6423.7-2017 Methods for non-destructive testing of steel pipes in the oil and gas industry Part 7: Magnetic particle detection of surface defects in seamless and welded ferromagnetic steel pipes

Professional Standard - Military and Civilian Products, Magnetic Powder Inspection

WJ 1806-1988 Test method for acid resistance stability of colorless optical glass powder method