ZH
RU
ES

Carbon peaks and graphite peaks

Carbon peaks and graphite peaks, Total:94 items.

In the international standard classification, Carbon peaks and graphite peaks involves: Environmental protection, Vocabularies, CHEMICAL TECHNOLOGY, Inorganic chemicals, Air quality, Materials for aerospace construction, Products of the chemical industry, Bearings, Seals, glands, Materials for the reinforcement of composites, Plastics, Linear and angular measurements, Reinforced plastics, Analytical chemistry.

Group Standards of the People's Republic of China, Carbon peaks and graphite peaks

T/CAQI 325-2023 Guidelines for the application of quality infrastructure in carbon peaking and carbon neutrality
T/NAIA 0222-2023 Guidelines for the application of quality infrastructure in carbon peaking and carbon neutrality

Jiangsu Provincial Standard of the People's Republic of China, Carbon peaks and graphite peaks

DB3212/T 1133-2023 A guide to the application of quality infrastructure in peak carbon neutrality

Hunan Provincial Standard of the People's Republic of China, Carbon peaks and graphite peaks

DB43/T 2656-2023 Guidelines for corporate carbon peak and carbon neutrality based on ESG evaluation

CZ-CSN, Carbon peaks and graphite peaks

CSN ON 34 6266-1964

American Society for Testing and Materials (ASTM), Carbon peaks and graphite peaks

ASTM C709-06 Standard Terminology Relating to Manufactured Carbon and Graphite
ASTM C695-91(2005) Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C695-91(2010) Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C749-92(1996) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-92(2002) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C695-15(2020) Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C695-21 Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C749-08 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-08(2010)e1 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-13 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C695-15 Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C749-15(2020) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C886-98(2015) Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ASTM C749-15 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C886-21 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ASTM C714-23 Standard Guide for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM C886-98 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ASTM C886-98(2005) Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ASTM C611-98(2005)e1 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
ASTM C565-93(2005) Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ASTM C886-98(2010)e1 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ASTM C565-93(1998) Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ASTM C565-15(2021) Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ASTM C565-15 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ASTM D4018-11 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
ASTM C565-93(2010)e1 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ASTM D7542-09 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
ASTM D4018-23 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
ASTM C559-16(2020) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
ASTM D7542-21 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
ASTM D4018-17 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
ASTM C1179-91(2010)e1 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C1179-91(2005) Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C714-85(2000) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by a Thermal Pulse Method
ASTM C714-05(2015) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM C714-17 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM D7542-15 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
ASTM C747-93(2005) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C1179-15 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C559-16 Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
ASTM C747-93(1998) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C747-16 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C747-23 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C769-98(2005) Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young''s Modulus
ASTM C1179-21 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C769-98 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young's Modulus
ASTM C808-75(2021) Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
ASTM C769-15(2020)e1 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM C808-75(2000) Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
ASTM C808-75(2010)e1 Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
ASTM C808-75(2016) Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
ASTM C769-15 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus
ASTM E1852-08 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
ASTM C651-91(2005)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-91(2010)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-20 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-11 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-13 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-15 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

American National Standards Institute （ANSI), Carbon peaks and graphite peaks

ANSI/ASTM C749:2013 Test Method for Tensile Stress-Strain of Carbon and Graphite
ANSI/ASTM C695:2015 Standard Test Method for Compressive Strength of Carbon and Graphite
ANSI/ASTM C886:2010 Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ANSI/ASTM C749:2015 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ANSI/ASTM C714:2005 Test Method for Thermal Diffusivity of Carbon and Graphite by a Thermal Pulse Method
ANSI/ASTM C714:2017 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ANSI/ASTM C611:2005 Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
ANSI/ASTM C565:2010 Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ANSI/ASTM C747:2005 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ANSI/ASTM D7542:2009 Test Method For Standard Test Method For Air Oxidation Of Carbon And Graphite In The Kinetic Regime
ANSI/ASTM C808:2000 Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
ANSI/ASTM C769:2009 Test Method For Sonic Velocity In Manufactured Carbon And Graphite Materials For Use In Obtaining An Approximate Young S Modulus

Association of German Mechanical Engineers, Carbon peaks and graphite peaks

VDI 3467-1998 Emission control - Production of carbon and electrographite materials
VDI 3467-2014 Emission control - Production of carbon and electrographite materials

BE-NBN, Carbon peaks and graphite peaks

NBN 278-1952

Society of Automotive Engineers (SAE), Carbon peaks and graphite peaks

SAE AMS3678/7-2004 Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite
SAE AMS3678/7-2006 Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite
SAE AMS3678/7A-2010 Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite

GM Europe, Carbon peaks and graphite peaks

GME QK 000748-1990 Phenoplast mit Kohlefasern und Grafitzusatz Phenoplast with Carbon Fibres and Graphite Filling English/German

NEMA - National Electrical Manufacturers Association, Carbon peaks and graphite peaks

NEMA CB-3:1990 Guidelines for Preparation of Material Safety Data Sheets for Carbon and Graphite Products

United States Navy, Carbon peaks and graphite peaks

NAVY MIL-E-17777 D (1)-1987 ELECTRODES, CUTTING AND WELDING, CARBON-GRAPHITE, UNCOATED AND COPPER-COATED
NAVY MIL-E-17777 D-1984 ELECTRODES, CUTTING AND WELDING, CARBON-GRAPHITE, UNCOATED AND COPPER-COATED

Professional Standard - Commodity Inspection, Carbon peaks and graphite peaks

SN/T 3593-2013 Determination of the volatile matter content in high-carbon graphite electrode broken and carbon additive

RU-GOST R, Carbon peaks and graphite peaks

GOST 24368-1980 Carbon bearings and packings of water pumps. Technological process of impregnation with fluoride
GOST R 57685-2017 Polymer composites. Determination of tension mechanical characteristics of continuous filament carbon and graphite fiber tows

IN-BIS, Carbon peaks and graphite peaks

IS 12308 Pt.4-1988

Association Francaise de Normalisation, Carbon peaks and graphite peaks

NF T51-143:1974 Plastics. Filled polyamides. Determination of percentages of graphite or carbon black and fiber glass.
NF T70-355:1996 Energetic materials for defense. Physico-chemical analysis and properties. Graphite, carbon black, tin oxide of single and double base properlants.

SAE - SAE International, Carbon peaks and graphite peaks

SAE AMS3678/7B-2016 Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite