ZH
RU
ES

The main parameters of the spectrophotometer

The main parameters of the spectrophotometer, Total:159 items.

In the international standard classification, The main parameters of the spectrophotometer involves: Medical equipment, Coals, Shipbuilding and marine structures in general, Optics and optical measurements, Products of the chemical industry, General methods of tests and analysis for food products, Fibre optic communications, Lighting, Solar energy engineering, Inorganic chemicals, Particle size analysis. Sieving, Optical equipment, Radiation measurements, Plastics, Spices and condiments. Food additives, Air quality, Fuels, Graphic technology, Lubricants, industrial oils and related products, Water quality.

Professional Standard - Machinery, The main parameters of the spectrophotometer

JB/T 9325-1999 Spectrophotometer series and its basic parameter

CU-NC, The main parameters of the spectrophotometer

NC 90-13-21-1984 Metrological Assurance. Spectrophotometers. Reference Dissolutions for the Verification of Spectrophotometers

RU-GOST R, The main parameters of the spectrophotometer

GOST R 53466-2009 Optics and optical equipment. Medical thermographs. General technical requirements. Methods of measuring the major parameters
GOST 32246-2013 Hard coals. Method for the spectrometric determination of genetic and technological parameters
GOST R 57260-2016 Construction climatology. Parameters for daylighting calculations according to the distribution of brightness of the sky
GOST 20903-1975 The rectangular fused silica cells for the spectrophotometers. Basic dimensions. Technical requirements
GOST 19868-1974 Spectrometric linear amplifiers for transistorized detectors of ionizing radiations. Methods of measuring parameters
GOST R 54730-2011 Food common salt. Measurement (determination) of potassium-ion mass fraction by flame-photometric method

CZ-CSN, The main parameters of the spectrophotometer

CSN 35 8850 Cast.3-1987 Photocouplers. Measuring methods of main parameters
CSN 25 2300-1972 Classification of instruments and devices or measurement of the geometrical arameters of surface finish

Professional Standard-Ships, The main parameters of the spectrophotometer

CB/T 3852.3-2008 Marine illuminant light type,parameters and main size.Part 1:projection light

BE-NBN, The main parameters of the spectrophotometer

NBN T 03-414-1983 Aluminium oxide primarily used for the production of aluminium - Determination of calcium content - Naphthalhydroxamic acid spectrophotometric method
NBN T 03-411-1983 Aluminium oxide primarily used for the production of aluminium - Determination of sodium content - Flame emission spectrophotometrie method
NBN T 03-418-1983 Aluminium oxide primarily used for the production of aluminium - Determination of fluorine content - Alizarin complexone and lanthanum chloride spectrophotometric method
NBN T 03-420-1983 Aluminium oxide primarily used for the production of aluminium - Determination of boron content - Curcumine spectrophotometric method
NBN T 03-419-1983 Aluminium oxide primarily used for the production of aluminium - Determination of phosphorus content - Reduced phosphomolybdate spectrophotometric method
NBN T 03-410-1983 Aluminium oxide primarily used for the production of aluminium - Determination oi silica content - Reduced molybdosilicate spectrophotometric method
NBN T 03-466-1983 Sodium fluoride primarily used for the production of aluminium - Determination of silica content - Reduced molybdosilicate spectrophotometric method

International Organization for Standardization (ISO), The main parameters of the spectrophotometer

ISO 2865:1973 Aluminium oxide primarily used for the production of aluminium; Determination of boron content; Curcumin spectrophotometric method
ISO 1617:1976 Aluminium oxide primarily used for the production of aluminium; Determination of sodium content; Flame emission spectrophotometric method
ISO 2829:1973 Aluminium oxide primarily used for the production of aluminium; Determination of phosphorus content; Reduced phosphomolybdate spectrophotometric method
ISO 9342-1:2023 Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Reference lenses for focimeters used for measuring spectacle lenses
ISO/FDIS 9342-1 Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Reference lenses for focimeters used for measuring spectacle lenses
ISO 2828:1973 Aluminium oxide primarily used for the production of aluminium; Determination of fluorine content; Alizarin complexone and lanthanum chloride spectrophotometric method
ISO 3430:1976 Sodium fluoride primarily used for the production of aluminium; Determination of silica content; Reduced molybdosilicate spectrophotometric method
ISO 2865:1973/Cor 1:1991 Aluminium oxide primarily used for the production of aluminium — Determination of boron content — Curcumin spectrophotometric method — Technical Corrigendum 1
ISO 1878:1974 Title missing - Legacy paper document
ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
ISO 21501-3:2019 Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter
ISO 21501-2:2019 Determination of particle size distribution — Single particle light interaction methods — Part 2: Light scattering liquid-borne particle counter
ISO/TS 15923-2:2017 Water quality - Determination of selected parameters by discrete analysis systems - Part 2: Chromium(VI), fluoride, total alkalinity, total hardness, calcium, magnesium, iron, iron(II), manganese and aluminium with photometric detection

YU-JUS, The main parameters of the spectrophotometer

JUS H.B8.612-1979 Ahtminium oxide primarily used for the production of aluminium. Determimtion of boron content - Curcumin spectrophotometric method
JUS H.B8.605-1979 Ahaninium oxide primarily med for the production of alumimum. Determinatton of sodium content. Flame emission spectrophotometric method
JUS H.B8.604-1979 Ahiminium oxide primarily used for the production of aluminium. Determination of silicon content. Reduced molybdosilicate spectrophotometric method
JUS H.B8.611-1979 Ahiminium oxide primarily used for the production of aluminium. Determination of phosphorus content - Reduced phosphomofybdate spectrophotometric method
JUS H.B8.610-1979 Ahiminium oxide primarify used for the production of ahiminium. Determimtion of fluorine content - Alizarin complexoneand lanthanum chbride spectrophotometric method

Korean Agency for Technology and Standards (KATS), The main parameters of the spectrophotometer

KS M ISO 2865-2003(2018)
KS M ISO 1617-2003(2013) Aluminium oxide primarily used for the production of aluminium ― Determination of sodium content-flame emission spectrophotometric method
KS M ISO 3430-2007(2012) Sodium fluoride primarily used for the production of aluminium－Determination of silica content－Reduced molybdosilicate spectrophotometric method
KS M ISO 2829-2002(2012) Aluminium oxide primarily used for the production of aluminium－Determination of phosphorus content－Reduced phosphomolybdate spectrophotometric method
KS M ISO 1232-2003(2018)
KS C IEC 60904-3-2010(2020) Photovoltaic devices－Part 3：Measurement principles for terrestrial photovoltaic(PV) solar vices with reference spectral irradiance data
KS M ISO 3430:2007 Sodium fluoride primarily used for the production of aluminium-Determination of silica content-Reduced molybdosilicate spectrophotometric method
KS M ISO 3430:2013 Sodium fluoride primarily used for the production of aluminium－Determination of silica content－Reduced molybdosilicate spectrophotometric method
KS M ISO 900-2003(2008) Aluminium oxide primarily used for the production of aluminium－Determination of titanium content－Diantipyrylmethane photometric method

CENELEC - European Committee for Electrotechnical Standardization, The main parameters of the spectrophotometer

EN 61290-2-3:1998 Optical Fibre Amplifiers - Basic Specification Part 2-3: Test Methods for Optical Power Parameters Optical Power Meter
EN 61290-1-3:1998 Optical Fibre Amplifiers - Basic Specification Part 1-3: Test Methods for Gain Parameters Optical Power Meter
EN 60904-3:1993 Photovoltaic Devices Part 3: Measurement Principles for Terrestrial Photovoltaic (PV) Solar Devices with Reference Spectral Irradiance Data

Association Francaise de Normalisation, The main parameters of the spectrophotometer

NF EN 61290-2-3:1998 Amplificateurs à fibres optiques - Spécification de base - Partie 2-3 : méthodes d'essai pour les paramètres de puissance optique. Mesureur de puissance optique.
NF C57-323:2008 Photovoltaic devices - Part 3 : measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data.
NF C57-323*NF EN 60904-3:2016 Photovoltaic devices - Part 3 : measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
NF C57-323*NF EN IEC 60904-3:2019 Photovoltaic devices - Part 3 : measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
NF EN IEC 60904-3:2019 Dispositifs photovoltaïques - Partie 3 : principes de mesure des dispositifs solaires photovoltaïques (PV) à usage terrestre incluant les données de l'éclairement spectral de référence
NF C93-919-2-5*NF EN 61755-2-5:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-5 : connection parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connection applications
NF C93-919-2-4*NF EN 61755-2-4:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4 : connection parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications
NF EN 61755-3-10:2017 Dispositifs d'interconnexion et composants passifs fibroniques - Interfaces optiques de connecteurs pour fibres optiques - Partie 3-10 : paramètres des connecteurs pour fibres unimodales à dispersion non décalée, en contact physique - sans angle, ...
NF EN IEC 61755-2-2:2022 Dispositifs d'interconnexion et composants passifs fibroniques - Interfaces optiques des connecteurs pour fibres unimodales - Partie 2-2 : Paramètres de connexion des fibres en contact physique à dispersion non décalée - avec angle
NF EN IEC 61755-2-1:2022 Dispositifs d'interconnexion et composants passifs fibroniques - Interfaces optiques des connecteurs pour fibres unimodales - Partie 2-1 : paramètres de connexion des fibres en contact physique à dispersion non décalée - Sans angle
NF EN 61755-2-4:2015 Dispositifs d'interconnexion et composants passifs fibroniques - Interfaces optiques de connecteurs - Partie 2-4 : paramètres de connexion de fibres unimodales à dispersion non décalée en contact physique - Sans angle pour applications en tant que...
NF EN 62788-1-4:2017 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 1-4 : Encapsulants - Mesurage du facteur de transmission optique et calcul du facteur de transmission photonique à pondération solaire, de l'indice de jaunisse...
NF R10-025-1:2016 Véhicules routiers - Mesurage de l'opacité des gaz d'échappement émis par les moteurs à allumage par compression (diesel) - Partie 1 : opacimètre de référence
NF C93-919-3-31*NF EN 61755-3-31:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31 : connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules
NF C57-788-1-4*NF EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules - Part 1 -4 : Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength

国家质量监督检验检疫总局, The main parameters of the spectrophotometer

SN/T 4675.24-2016 Spectrophotometric method for determination of Forintschock index of export wines

Japanese Industrial Standards Committee (JISC), The main parameters of the spectrophotometer

JIS C 6122-2:1998 Optical fiber amplifiers -- Test methods -- Part 2: Test methods for optical power parameters
JIS C 5965-2-5:2016 Fiber optic connector optical interfaces -- Part 2-5: Connection parameters of single mode physically contacting fibers -- Angled for reference connection applications
JIS C 5965-2-4:2016 Fiber optic connector optical interfaces -- Part 2-4: Connection parameters of single mode physically contacting fibers -- Non-angled for reference connection applications

Professional Standard - Recommended Standards for Engineering Construction, The main parameters of the spectrophotometer

CECS 56-1994 Standard of Light Distribution Classity and Lighting Design Parameter for Interior Luminaire

German Institute for Standardization, The main parameters of the spectrophotometer

DIN 58960-4:1991-01 Photometer for analytical tests; requirements for the description of technical data for the user
DIN EN ISO 9342-1:2022-07 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO/DIS 9342-1:2022); German and English version prEN ISO 9342-1:2022 / Note: Date of issue 2022-0...
DIN 58389-2:1996 Telescopes - Photometric parameters for observation telescopes and telescopic sights - Part 2: Determination of spectral transmission
DIN EN 61755-2-5:2015-09 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-5: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connection applications (IEC 61755-2-5...
DIN EN 61755-2-4:2015-09 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications (IEC 61755...
DIN EN ISO 9342-1:2023-10 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023); German version EN ISO 9342-1:2023
DIN EN 61755-2-2:2019-07 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-2: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - angled (IEC 86B/4163/CD:2018); Text in German and English /...
DIN EN 61755-2-1:2020-02 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-1: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - non-angled (IEC 86B/4162/CD:2018); Text in German and Engli...
DIN EN 61755-3-32:2016-10 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules (IEC 61755-3-32...
DIN EN 61755-3-31:2016-04 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules (IEC 617...
DIN 25482-2 Bb.1:2000 Detection limit and decision threshold for ionizing radiation measurements - Part 2: Counting measurements by spectrometry, neglecting the influence of sample treatment; comments and examples

TR-TSE, The main parameters of the spectrophotometer

TS 749-1969 ALUMINIUM OXIDEPRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM DETERMINATION OF IRON CONTENT 1,10 — PHENANTHROLINE PHOTOMETRIC METHOD
TS 3617-1981 SODIUM FLUORIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — DETERMINATION OF SILICA CONTENT — REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD
TS 1147-1973 AL.UMINTUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM DETERMINATION OF SILICA CONTENT SPECTROPHOTOMETRIC METHOD AS THE REDUCED SILICOMOLYBDATE COMPLEX
TS 1893-1975 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — DETERMINATION OF FLUORINE CONTENT — AL?ZAR?N COMPLEXONE AND LANTHANUM CHLORIDE SPECTROPHOTOMETRIC METHOD

International Electrotechnical Commission (IEC), The main parameters of the spectrophotometer

IEC 61290-2-3:1998 Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for power parameters - Optical power meter
IEC 60904-3:2019 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
IEC 60904-3:2019 RLV Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
IEC 61290-1-3:1998 Optical fibre amplifiers - Basic specification - Part 1-3: Test methods for gain parameters - Optical power meter
IEC 61755-3-2:2006/COR1:2009 Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-2: Connection parameters of dispersion unshifted physically contacting fibres
IEC 61755-2-2:2022 Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-2: Connection parameters of dispersion unshifted physically contacting fibres
IEC 61755-3-32:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled
IEC 61755-3-31:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled
IEC 62788-1-4:2016/AMD1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 62788-1-4:2016+AMD1:2020 CSV Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness

RO-ASRO, The main parameters of the spectrophotometer

STAS SR ISO 1232:1995 Aluminium oxide primarily used for the production of aluminium -Determination of silica content - Reduced molybdosilicate spectrophotometric method

IN-BIS, The main parameters of the spectrophotometer

IS 233 Pt.6-1978

American Society for Testing and Materials (ASTM), The main parameters of the spectrophotometer

ASTM E1164-12 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

未注明发布机构, The main parameters of the spectrophotometer

BS EN ISO 9342-1:2023 Optics and optical instruments — Test lenses for calibration of focimeters Part 1 : Reference lenses for focimeters used for measuring spectacle lenses

European Committee for Electrotechnical Standardization（CENELEC）, The main parameters of the spectrophotometer

EN 60904-3:2008 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
EN IEC 60904-3:2019 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
EN 61755-2-4:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications
EN 61755-2-5:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-5: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connection applications
EN IEC 61755-2-1:2022 Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-1: Connection parameters of dispersion unshifted physically contacting fibres - Non-angled
EN IEC 61755-2-2:2022 Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-2: Connection parameters of dispersion unshifted physically contacting fibres - Angled
EN 61755-3-31:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules
EN 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength

(U.S.) Telecommunications Industries Association , The main parameters of the spectrophotometer

TIA/EIA-455-211-2000 FOTP-211 IEC 61290-2-3 Optical Fibre Amplifiers - Basic Specification Part 2-3: Test Methods for Optical Power Parameters - Optical Power Meter
TIA/EIA-455-208-2000 FOTP-208 IEC 61290-1-3 Optical Fibre Amplifiers - Basic Specification Part 1-3: Test Methods for Gain Parameters - Optical Power Meter

Danish Standards Foundation, The main parameters of the spectrophotometer

DS/EN 60904-3:2008 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
DS/ISO 1878:1989 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
DS/ISO 21501-4:2007 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces

AENOR, The main parameters of the spectrophotometer

UNE-EN 60904-3:2009 Photovoltaic devices- Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
UNE 82302:1992 CLASSIFICATION OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH.
UNE-EN 2591-216:1998 AEROSPACE SERIES. ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION. TEST METHODS. PART 216: ENGAGEMENT DEPTH OF CONTACTS.

ES-UNE, The main parameters of the spectrophotometer

UNE-EN IEC 60904-3:2019 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data (Endorsed by Asociación Española de Normalización in September of 2019.)
UNE-EN IEC 61755-2-1:2022 Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-1: Connection parameters of dispersion unshifted physically contacting fibres - Non-angled (Endorsed by Asociación Española de N...
UNE-EN IEC 61755-2-2:2022 Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-2: Connection parameters of dispersion unshifted physically contacting fibres - angled (Endorsed by Asociación Española de Norma...
UNE-EN 61755-2-5:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-5: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connection applications (Endorsed by A...
UNE-EN 61755-2-4:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications (Endorsed ...
UNE-EN 61755-3-32:2016 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules (Endorsed by AE...
UNE-EN 61755-3-31:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules (Endorse...

American National Standards Institute （ANSI), The main parameters of the spectrophotometer

ANSI/TIA-455-211-2000 FOTP211 - IEC 61290-2-3- Optical Fibre Amplifiers - Basic Specification - Part 2-3: Test Methods for Optical Power Parameters - Optical Power Meter demultiplexer
ANSI/TIA-455-208-2000 FOTP208- IEC 61290-1-3 - Optical Fibre Amplifiers - Basic Specification - Part 1-3: Test Methods for Gain Parameters - Optical Power Meter

British Standards Institution (BSI), The main parameters of the spectrophotometer

BS ISO 21501-3:2019 Determination of particle size distribution. Single particle light interaction methods - Light extinction liquid-borne particle counter
BS ISO 21501-2:2019 Determination of particle size distribution. Single particle light interaction methods - Light scattering liquid-borne particle counter
22/30406184 DC BS EN ISO 9342-1. Optics and optical instruments. Test lenses for calibration of focimeters - Part 1. Reference lenses for focimeters used for measuring spectacle lenses
19/30385918 DC BS ISO 21501-3. Determination of particle size distribution. Single particle light interaction methods. Part 3. Light extinction liquid-borne particle counter
BS ISO 21501-4:2018+A1:2023 Determination of particle size distribution. Single particle light interaction methods - Light scattering airborne particle counter for clean spaces
19/30385915 DC BS ISO 21501-2. Determination of particle size distribution. Single particle light interaction methods. Part 2. Light scattering liquid-borne particle counter
BS ISO 24585-1:2023 Graphic technology. Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application - Parameters and measurement methods
18/30349977 DC BS EN IEC 61755-2-2. Fibre optic interconnecting devices and passive components. Connector optical interfaces. Part 2-2. Connection parameters of non-dispersion shifted single-mode physically contacting fibres. angled
20/30424607 DC BS EN IEC 61755-2-2. Fibre optic interconnecting devices and passive components. Connector optical interfaces. Part 2-2. Connection parameters of dispersion unshifted single-mode physically contacting fibres. Angled
21/30419440 DC BS ISO 21501-4 AMD1. Determination of particle size distribution. Single particle light interaction methods. Part 4. Light scattering airborne particle counter for clean spaces
18/30349973 DC BS EN IEC 61755-2-1. Fibre optic interconnecting devices and passive components - Connector optical interfaces. Part 2-1. Connection parameters of non-dispersion shifted single-mode physically contacting fibres - non-angled
20/30424606 DC BS EN IEC 61755-2-1. Fibre optic interconnecting devices and passive components. Connector optical interfaces. Part 2-1. Connection parameters of non-dispersion unshifted single-mode physically contacting fibres. Non-angled
23/30449564 DC BS ISO 24585-1. Graphic technology. Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application - Part 1. Parameters and measurement methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The main parameters of the spectrophotometer

GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
GB/T 15972.22-2008 Specifications for optical fibre test methods.Part 22:Measurement methods and test procedures for dimensions.Length measurement

European Committee for Standardization (CEN), The main parameters of the spectrophotometer

EN ISO 9342-1:2023 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023)
FprEN ISO 9342-1 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO/FDIS 9342-1:2023)

Lithuanian Standards Office , The main parameters of the spectrophotometer

LST EN 60904-3-2008 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data (IEC 60904-3:2008)
LST EN 61755-2-4-2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications (IEC 61755-2-
LST EN 61755-2-5-2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-5: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connection applications (IEC 61755-2-5:20

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The main parameters of the spectrophotometer

GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces

Underwriters Laboratories (UL), The main parameters of the spectrophotometer

UL 1703 CRD-2010 UL Standard for Safety Flat-Plate Photovoltaic Modules and Panels - Section / Paragraph Reference: 41.1 Subject: Mechanical Loading Test Deflection Parameter (Edition 3: June 30@ 2004)
UL 61730-2 CRD-2022 UL Standard for safety Photovoltaic (PV) Module Safety Qualification – Part 2: Requirements for Testing - Section / Paragraph Reference: 10.17, 10.17DV DR Subject: Requirements for PV fire types 41-49, UL 61730-2
UL 8750 CRD-2011 UL Standard for Safety Light Emitting Diode (LED) Equipment for Use in Lighting Products - Section / Paragraph Reference: Supplement SA (NEW) Subject: Supplemental Requirements For Light-emitting-diode Packages (Edition 1: November 17@ 2009)

Indonesia Standards, The main parameters of the spectrophotometer

SNI 19-7119.5-2005 Ambient atmospheres - Part 5: Test methods of index sulphates content by PbO2 candle media and turbidimetry using spectrophotometers

Standard Association of Australia （SAA）, The main parameters of the spectrophotometer

AS/NZS 1158.2:2020 Lighting for roads and public spaces, Part 2: Computer procedures for the calculation of light technical parameters for Category V and Category P lighting
AS/NZS 1680.3:2017 Interior and workplace lighting, Part 3: Measurement, calculation and presentation of photometric data

Professional Standard - Energy, The main parameters of the spectrophotometer

NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, The main parameters of the spectrophotometer

SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

GOSTR, The main parameters of the spectrophotometer

GOST R 58648.2-2019 Photovoltaic module. Performance testing and energy rating. Part 2. Determination of spectral sensitivity, characteristics dependence on the incidence angle and coefficients for calculating the operating temperature

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, The main parameters of the spectrophotometer

ITU-T G.911-1993 Parameters and Calculation Methodologies for Reliability and Availability of Fibre Optic Systems - Digital Sections and Digital Line Systems (Study Group XV) 33 pp

PL-PKN, The main parameters of the spectrophotometer

PN-EN 62788-1-4-2017-02/A1-2021-07 E Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength