ZH
RU
ES

Surface Microhardness

Surface Microhardness, Total:498 items.

In the international standard classification, Surface Microhardness involves: Powder metallurgy, Testing of metals, Coals, Jewellery, Optical equipment, Ferrous metals, Mechanical testing, Surface treatment and coating, Paints and varnishes, Linear and angular measurements, Metalliferous minerals, Heat treatment, Diagnostic, maintenance and test equipment, Analytical chemistry, Furniture, Road vehicle systems, Welding, brazing and soldering, Chipless working equipment, Ceramics, Products of the chemical industry, Rubber and plastics products, Vocabularies, Construction materials, Iron and steel products, Equipment for the metallurgical industry, Seals, glands, Shafts and couplings, Organic chemicals, Glass, Sports equipment and facilities, Paint coating processes, Reinforced plastics, Cellular materials, Optoelectronics. Laser equipment.

Association Francaise de Normalisation, Surface Microhardness

NF EN ISO 4507:2007 Matériaux ferreux frittés, cémentés ou carbonitrurés - Détermination et vérification de la profondeur de cémentation par mesurage de la microdureté
NF EN ISO 4498:2010 Matériaux métalliques frittés, à l'exclusion des métaux-durs - Détermination de la dureté apparente et de la microdureté
NF A95-321:2008 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness.
NF A95-321*NF EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
NF EN ISO 6769:2022 Émaux vitrifiés - Détermination de la dureté superficielle suivant l'échelle de Mohs
NF A04-102:2003 Steels - Micrographic determination of the apparent grain size.
NF A04-102:2013 Steels - Micrographic determination of the apparent grain size
NF A91-118*NF EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests.
NF A89-568:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds.
NF A95-348*NF EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
NF A89-568*NF EN ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
NF A04-250*NF EN ISO 18203:2022 Steel - Determination of the thickness of surface-hardened layers
NF EN ISO 25178-607:2019 Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 607 : caractéristiques nominales des instruments sans contact (microscopie confocale)
NF T70-336:2013 Energetic materials for defense - Physical-chemical analysis and properties - Microhardness
NF T70-336:1995 Energetic materials for defense. Physical-chemical analysis and properties. Microhardness
NF EN ISO 14271:2017 Soudage par résistance - Essais de dureté Vickers (force réduite et microdureté) sur soudures par résistance par points, par bossages et à la molette
NF A95-329:1986 Powder metallurgy. Sintered metal materials excluding hardmetals. Measurement of Vickers microhardness.
NF P61-504:1991 Ceramic tiles. Determination of scratch hardness of surface according to mohs.
NF A89-204-2*NF EN ISO 9015-2:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2 : microhardness testing of welded joints
NF EN ISO 9015-2:2016 Essais destructifs des soudures sur matériaux métalliques - Essais de dureté - Partie 2 : essai de microdureté des assemblages soudés
NF EN ISO 4516:2002 Revêtements métalliques et autres revêtements inorganiques - Essais de microdureté Vickers et Knoop
NF T47-404-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2 : Shore-type durometer method.
NF A92-129*NF EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale.
NF B10-506:1973 Quarry products. Limestones. Measurement of surface hardness (groove width).
NF A95-321-2:1988 Powder metallurgy. Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2 : case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen.
NF T47-404-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1 : IRHD method.
NF X21-069-2:2010 Surface chemical analysis - Vocabulary - Part 2 : terms used in scanning-probe microscopy.
NF T73-407:1997 Surface active agents. Preparation of water with known calcium hardness.
NF A03-021:1994 METALLIC MATERIALS. HARDNESS TEST. PART 1 : ROCKWELL TEST (SCALES A, B, C, D, E, F, G, H, K) AND ROCKWELL SUPERFICIAL TEST (SCALES 15N, 30N, 45N, 15T, 30T AND 45T). (EUROPEAN STANDARD EN 10109-1).
NF P90-146*NF EN 14954:2005 Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas
NF A36-328:2005 Iron and steel - Determination of the conventional depth of hardening after surface heating.
NF T73-407*NF EN 12829:2011 Surface active agents - Preparation of water with known calcium and magnesium hardness.
NF EN ISO 25178-603:2013 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 603 : caractéristiques nominales des instruments sans contact (microscopes interférométriques à glissement de franges)
NF A03-022:1994 METALLIC MATERIALS. HARDNESS TEST. PART 2 : VERIFICATION OF ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T). (EUROPEAN STANDARD EN 10109-2).
NF P14-204-6*NF EN 13892-6:2003 Methods of test for screed materials - Part 6 : determination of surface hardness
NF EN 12829:2011 Agents de surface - Préparation d'une eau de dureté calcique et magnésienne déterminée
NF A95-321-1:1993 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 1 : materials of essentially uniform section hardness.
NF EN 843-4:2005 Céramiques techniques avancées - Propriétés mécaniques des céramiques monolithiques à température ambiante - Partie 4 : essais de dureté Vickers, Knoop et Rockwell superficiel
NF EN ISO 4499-4:2017 Métaux-durs - Détermination métallographique de la microstructure - Partie 4 : caractérisation de la porosité, des défauts carbone et de la teneur en phase êta

GM North America, Surface Microhardness

GM GM9054P-1988 Microhardness Testing

Korean Agency for Technology and Standards (KATS), Surface Microhardness

KS B 5538-1993 Micro hardness testing machines for vickers and knoop hardness
KS D ISO 4498:2010 Sintered metal materials, excluding hardmetals-Determination of apparent hardness and microhardness
KS D 8515-2009 Metallic and related coatings－Vickers and Knoop microhardness tests
KS B 0161-1999(2009) Surface roughness－Definitions and designation
KS B ISO 14271:2019 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
KS D ISO 4518:2012 Metallic coatings-Measurement of coating thickness-Profilometric method
KS D 8515-2009(2020) Metallic and related coatings－Vickers and knoop microhardness tests
KS M ISO 6441-1:2005 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS M ISO 6441-1:2002 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS D ISO 4507-2004(2019) Sintered ferrous materials, carburized or carbonitrided -Determination and verification of case hardening depth by a micro hardness test
KS M ISO 6441-2:2002 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
KS M ISO 6441-2:2005 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
KS B ISO 9015-2:2002 Destructive tests on welds in metallic materials－Hardness testing－Part 2：Microhardness testing of welded joints
KS B 0806-1994 Method of rockwell and rockwell superficial hardness test
KS B ISO 9015-2:2017 Destructive tests on welds in metallic materials－Hardness testing－Part 2：Microhardness testing of welded joints
KS B ISO 9015-2:2022 Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
KS B ISO 10250:2003 Metallic materials－Hardness testing－Tables of Knoop hardness values for use in tests made on flat surfaces
KS D 0275-1993 Method of measuring surface hardness for nitrided iron and stee1
KS M ISO 2174-2006(2021) Surface active agents－Preparation of water with known calcium hardness
KS M ISO 2174-2006(2016) Surface active agents－Preparation of water with known calcium hardness
KS M ISO 7267-2:2010 Rubber-covered rollers－Determination of apparent hardness－Part 2：Shore-type durometer method
KS M ISO 2174:2006 Surface active agents－Preparation of water with known calcium hardness
KS M ISO 2174:2022 Surface active agents — Preparation of water with known calcium hardness
KS D 0275-1993(2018)
KS D ISO 4499-2-2009(2019) Hardmetals－Metallographic determination of microstructure－Part 2：Measurement of WC grain size
KS B ISO 10250-2003(2018)
KS D ISO 4498-2-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness-Part 2：Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
KS B ISO 19012-1-2016(2021) Optics and photonics－Designation of microscope objectives－Part 1：Flatness of field/Plan
KS M ISO 7267-3:2010 Rubber-covered rollers-Determination of apparent hardness-Part 3:Pusey and Jones method
KS M ISO 7267-3:2015 Rubber-covered rollers－Determination of apparent hardness－Part 3：Pusey and Jones method
KS C 7105-2007(2017) Plasma display panels - Measuring method of glass surface temperature on PDP module
KS D ISO 4498-1-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness－Part 1：Materials of essentially uniform section hardness

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Surface Microhardness

GB/T 9097-2016 Sintered metal materials, excluding hardmetals.Determination of apparent hardness and mincrohardness
GB/T 31378-2015 Test method for surface hardness of flat panel display (FPD) polarizing film
GB/T 31227-2014 Test method for the surface roughness by atomic force microscope for sputtered thin films
GB/T 32189-2015 Atomic Force Microscopy Examination of Surface Roughness of Gallium Nitride Single Crystal Substrate
GB/T 31226-2014 Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components
GB/T 1818-1994 Metallic meterials--Rockwell superficial hardness test
GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the calibration of ISO surface profile comparators and for the determination of surface
GB/T 27552-2011 Destructive tests on welds in metallic materials.Microhardness testing of welded joints
GB/T 42659-2023 Surface Chemical Analysis Scanning Probe Microscopy Determination of Geometric Quantities Using Scanning Probe Microscopy: Measurement System Calibration
GB/T 9451-2005 Determination of total or effective thickness of thin surface hardened layers of steel parts
GB/T 9451-1988 Determination of total or effective thickness of thin surface hardened layers of steel parts
GB/T 6367-1997 Surface active agents--Preparation of water with known calcium hardness
GB/T 14235.5-1993 Testing method for surface hardness of pattern materials in investment casting
GB/T 6367-2012 Surface active agents.Preparation of water with known calcium hardness
GB/T 22461.2-2023 Glossary of Surface Chemical Analysis Part 2: Scanning Probe Microscopy Terminology
GB 9790-1988 Metallic and related coatings--Vickers and Knoop microhardness tests
GB/T 9790-1988 Metallic and related coatings--Vickers and knoop microhardness tests
GB/T 8640-1988 Thermal sprayed metallic coatings--Rockwell hardness test
GB/T 41805-2022 Methodology for the quantitative inspection of the defect on optics surface—Microscopic scattering dark-field imaging
GB/T 6462-1986 Metallic and oxide coatings--Measurement of coating thickness--Microscopical method
GB/T 32642-2016 Flat panel displays glass substrate surface roughness measurement method
GB/T 32643-2016 Flat panel displays glass substrates surface waviness measurement method
GB/T 42543-2023 Determination of the Normal Elastic Constant of a Cantilever Beam by Surface Chemical Analysis Scanning Probe Microscopy
GB/T 9097.1-2002 Sintered metal materials,excluding hardmetals--Determination of apparent hardness Part 1: Materials of essentially uniform section hardness

Danish Standards Foundation, Surface Microhardness

DS/EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
DS/EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
DS/ISO 4516:1983 Metallic and related coatings. Vickers and Knoop microhardness tests
DS/EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
DS/EN ISO 14271/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
DS/ISO 18203:2021 Steel – Determination of the thickness of surface-hardened layers
DS/EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
DS/EN ISO 9015-2:2011 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
DS/EN 101:1993 Ceramic tiles. Determination of scratch hardness of surface according to Mohs
DS/EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
DS/EN 12829:2011 Surface active agents - Preparation of water with known calcium and magnesium hardness
DS/EN 10328:2005 Iron and steel - Determination of the conventional depth and hardening after surface heating
DS/EN 14954:2006 Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas
DS/EN 24498-1:1994 Sintered metal materials,excluding hardmetals-Determination of apparent hardness-Part 1:Materials of essentially uniform section hardness

KR-KS, Surface Microhardness

KS D ISO 4498-2010 Sintered metal materials, excluding hardmetals－Determination of apparent hardness and microhardness
KS B ISO 14271-2019 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
KS M ISO 6441-1-2002 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS M ISO 6441-2-2002 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
KS D 0275-1993(2023) Method of measuring surface hardness for nitrided iron and steel
KS B ISO 9015-2-2022 Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
KS B ISO 9015-2-2017 Destructive tests on welds in metallic materials－Hardness testing－Part 2：Microhardness testing of welded joints
KS M ISO 2174-2022 Surface active agents — Preparation of water with known calcium hardness
KS B ISO 10250-2003(2023)
KS B ISO 19012-1-2016 Optics and photonics－Designation of microscope objectives－Part 1：Flatness of field/Plan

German Institute for Standardization, Surface Microhardness

DIN EN ISO 4498:2010-11 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010); German version EN ISO 4498:2010
DIN ISO 4498:2005 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005);English version of DIN ISO 4498:2005
DIN EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005); German version EN ISO 4498:2007
DIN EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)English version of DIN EN ISO 4507:2007-05
DIN EN ISO 4507:2007-05 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000); German version EN ISO 4507:2007
DIN EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010); German version EN ISO 4498:2010
DIN EN ISO 643:2003 Steels - Micrographic determination of the apparent grain size (ISO 643:2003); German version EN ISO 643:2003
DIN EN ISO 14271:2018-01 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017); German version EN ISO 14271:2017
DIN EN ISO 18203:2022-07 Steel - Determination of the thickness of surface-hardened layers (ISO 18203:2016); German version EN ISO 18203:2022
DIN V 32938:1998 Surface profiling by means of optical microscopic methods - Concepts and measurement procedures
DIN EN ISO 4516:2002-10 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002); German version EN ISO 4516:2002
DIN EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
DIN EN ISO 9015-2:2016-10 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016); German version EN ISO 9015-2:2016
DIN 3761-12:1984 Rotary shaft lip type seals for automobils; test; determination of indentation hardness of elastomers; micro hardness test
DIN EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002); German version EN ISO 4516:2002
DIN 22020-2:1998-08 Investigations of raw material in hard-coal-mining - Microscopical examination of hard coal, coke and briquettes - Part 2: Preparation of polished surface from lump material and particulate blocks
DIN EN 10328:2005 Iron and steel - Determination of the conventional depth of hardening after surface heating; German version EN 10328:2005
DIN EN 12829:2011-07 Surface active agents - Preparation of water with known calcium and magnesium hardness; German version EN 12829:2011
DIN EN 14954:2006 Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas; English version of DIN EN 14954:2006
DIN EN 13892-6:2003 Methods of test for screed materials - Part 6: Determination of surface hardness; German version EN 13892-6:2002
DIN EN ISO 6769:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 527-4:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 4491-1:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 5179:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 19979:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 6769:2023 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
DIN EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012); German version EN ISO 643:2012
DIN EN 14954:2006-01 Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas; German version EN 14954:2005
DIN EN ISO 4499-4:2016-10 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content (ISO 4499-4:2016); German version EN ISO 4499-4:2016
DIN EN ISO 643:2020 Steel - Micrographic determination of the apparent grain size (ISO/DIS 643:2017); German and English version prEN ISO 643:2017
DIN EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO/FDIS 643:2012); German version FprEN ISO 643:2012
DIN EN ISO 9015-2:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016); German version EN ISO 9015-2:2016

British Standards Institution (BSI), Surface Microhardness

BS ISO 22394:2010 Hardmetals - Knoop hardness test
BS EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
BS EN ISO 4507:2000 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
BS EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test
BS ISO 19012-1:2013 Microscopes. Designation of microscope objectives. Flatness of field/Plan
BS EN ISO 643:2012 Steels. Micrographic determination of the apparent grain size
BS EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
BS ISO 11039:2012 Surface chemical analysis. Scanning-probe microscopy. Measurement of drift rate
BS EN ISO 14271:2017 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
BS EN ISO 4499-4:2016 Hardmetals. Metallographic determination of microstructure. Characterisation of porosity, carbon defects and eta-phase content
BS EN ISO 9015-2:2011 Destructive tests on welds in metallic materials. Hardness testing. Microhardness testing of welded joints
BS EN ISO 18203:2022 Steel. Determination of the thickness of surface-hardened layers
BS ISO 18337:2015 Surface chemical analysis. Surface characterization. Measurement of the lateral resolution of a confocal fluorescence microscope
BS EN 12829:2011 Surface active agents. Preparation of water with known calcium and magnesium hardness
BS ISO 7267-2:2009 Rubber-covered rollers. Determination of apparent hardness. Shore-type durometer method
BS ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Shore-type durometer method
BS ISO 19606:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for surface roughness of fine ceramic films by atomic force microscopy
BS ISO 18115-2:2013 Surface chemical analysis. Vocabulary. Terms used in scanning-probe microscopy
BS ISO 18203:2016 Steel. Determination of the thickness of surface-hardened layers
BS ISO 27911:2011 Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
BS EN ISO 9015-2:2016 Tracked Changes. Destructive tests on welds in metallic materials. Hardness testing. Microhardness testing of welded joints
BS EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
BS 3900-E12.1:2000 Methods of test for paints - Determination of Knoop hardness by measurement of the indentation length using a microscope
BS ISO 18115-2:2010 Surface chemical analysis - Vocabulary - Terms used in scanning-probe microscopy
22/30436770 DC BS ISO 6769. Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale
BS ISO 28600:2011 Surface chemical analysis. Data transfer format for scanning-probe microscopy
BS EN 10328:2005 Iron and steel - Determination of the conventional depth and hardening after surface heating
BS EN ISO 6769:2022 Tracked Changes. Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale
BS ISO 23729:2022 Surface chemical analysis. Atomic force microscopy. Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
BS ISO 18115-2:2021 Surface chemical analysis. Vocabulary - Terms used in scanning-probe microscopy
21/30412880 DC BS ISO 23729. Surface chemical analysis. Atomic force microscopy. Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
BS 7011-2.2:1998 Consumable accessories for light microscopes. Slides. Specification for materials and quality of finish
BS EN 13892-6:2002 Methods of test for screed materials - Determination of surface hardness
BS ISO 11775:2015 Surface chemical analysis. Scanning-probe microscopy. Determination of cantilever normal spring constants
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS EN ISO 25178-607:2019 Geometrical product specifications (GPS). Surface texture: Areal - Nominal characteristics of non-contact (confocal microscopy) instruments
BS EN 14954:2005 Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas
BS 6286:1982 Methods of measurement of total or effective thickness of thin surface-hardened layers in steel
23/30420097 DC BS ISO 23124 Surface Chemical Analysis. Measurement of lateral and axial resolutions of Raman microscope
19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS EN 1043-2:1997 Destructive tests on welds in metallic materials - Hardness testing - Micro hardness testing on welded joints
BS 7012-3:1997 Light microscopes - Imaging distances related to mechanical reference planes for tube length 160 mm

National Metrological Verification Regulations of the People's Republic of China, Surface Microhardness

JJG 260-1991 Verification Regulation of Microhardometer
JJG 2025-1989 Verification Scheme of Measuring Instruments for Microhardness
JJG 335-1991 Verification Regulation of Standard Vickers Microhardness Test Block
JJG 149-1994 V.R. of Standard Superficial Rockwell Hardness Test Block
JJG 831-1993 Verification Regulation of Green sand Mould Surface Hardness Tester for Castings
JJG 2068-1990 Verification Scheme of Measuring Instruments for Metallic Superficial Rockwell Hardness

International Organization for Standardization (ISO), Surface Microhardness

ISO 4498:2005 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
ISO 6441-1:1999 Paints and varnishes - Determination of micro-indentation hardness - Part 1: Knoop hardness by measurement of indentation length
ISO 4516:1980 Metallic and related coatings; Vickers and Knoop microhardness tests
ISO/CD 643 Steels — Micrographic determination of the apparent grain size
ISO 19012-1:2011 Microscopes - Designation of microscope objectives - Part 1: Flatness of field/Plan
ISO 19012-1:2013 Microscopes.Designation of microscope objectives .Part 1: Flatness of field/Plan
ISO 6441-2:1999 Paints and varnishes - Determination of micro-indentation hardness - Part 2: Knoop hardness by measurement of indentation depth under load
ISO 6769:2022 Vitreous and porcelain enamels — Determination of surface scratch hardness according to the Mohs scale
ISO 18203:2016 Steel - Determination of the thickness of surface-hardened layers
ISO 18337:2015 Surface chemical analysis - Surface characterization - Measurement of the lateral resolution of a confocal fluorescence microscope
ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
ISO 19606:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for surface roughness of fine ceramic films by atomic force microscopy
ISO 9015-2:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
ISO 27911:2011 Surface chemical analysis - Scanning-probe microscopy - Definition and calibration of the lateral resolution of a near-field optical microscope
ISO/R 1024:1969 Rockwell superficial hardness test (N and T scales) for steel
ISO 9015-2:2003 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
ISO 10250:1994 Metallic materials - Hardness testing - Tables of Knoop hardness values for use in tests made on flat surfaces
ISO 643:2003 Steels - Micrographic determination of the apparent grain size
ISO 643:2012 Steels - Micrographic determination of the apparent grain size
ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
ISO 4499-4:2016 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content
ISO 2174:1972 Title missing - Legacy paper document
ISO 2174:1990 Surface active agents; preparation of water with known calcium hardness
ISO/WD TR 23683:2023 Surface chemical analysis — scanning probe microscopy — Guideline for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy
ISO/R 1079:1969 Verification of Rockwell superficial N and T scale hardness testing machines
ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2: Shore-type durometer method
ISO 7267-2:1986 Rubber-covered rollers; Determination of apparent hardness; Part 2 : Shore-type durometer method
ISO 23729:2022 Surface chemical analysis — Atomic force microscopy — Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
ISO 11039:2012 Surface chemical analysis - Scanning-probe microscopy - Measurement of drift rate
ISO 18115-2:2021 Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy
ISO 2712:1973 Copper and copper alloys — Rockwell superficial hardness test (N and T scales)
ISO 2174:1979 Surface active agents — Preparation of water with known calcium hardness
ISO 4507:1978 Sintered ferrous materials, carburized or carbonitrided; Determination and verification of effective case depth by the Vickers microhardness testing method
ISO 28600:2011 Surface chemical analysis - Data transfer format for scanning-probe microscopy
ISO/DIS 23124:2023 Surface Chemical Analysis — Measurement of lateral and axial resolutions of Raman microscope
ISO 1024:1989 Metallic materials; hardness test; Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T)
ISO 4970:1979 Steel; Determination of total or effective thickness of thin surface-hardened layers
ISO 14271:2011/Cor 1:2012 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds — Technical Corrigendum 1
ISO 410:1982 Metallic materials; Hardness test; Tables of Brinell hardness values for use in tests made on flat surfaces
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
ISO 409-1:1982 Metallic materials; Hardness test; Tables of Vickers hardness values for use in tests made on flat surfaces; Part 1 : HV 5 to HV 100
ISO 1079:1989 Metallic materials; hardness test; verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
ISO 4498-2:1981 Sintered metal materials, excluding hardmetals; Determination of apparent hardness; Part 2 : Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
ISO 18115-2:2013 Surface chemical analysis.Vocabulary.Part 2: Terms used in scanning-probe microscopy
ISO 11775:2015 Surface chemical analysis - Scanning-probe microscopy - Determination of cantilever normal spring constants
ISO 7267-3:2011 Rubber-covered rollers - Determination of apparent hardness - Part 3: Pusey and Jones method
ISO/R 1355:1970 Calibration of standardized blocks to be used for Rockwell superficial N and T scale hardness testing machines
ISO 4498-1:1990 Sintered metal materials, excluding hardmetals; determination of apparent hardness; part 1: materials of essentially uniform section hardness
ISO 4498-1:1978 Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness
ISO/DIS 19606:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for surface roughness of fine ceramic films by atomic force microscopy
ISO 1355:1989 Metallic materials; hardness test; calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
ISO 409-2:1983 Metallic materials; Hardness test; Tables of Vickers hardness values for use in tests made on flat surfaces; Part 2 : HV 0,2 to less than HV 5
ISO 18115-2:2010 Analyse chimique des surfaces — Vocabulaire — Partie 2: Termes utilisés en microscopie à sonde à balayage (Première édition)
ISO 11952:2019 Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 11952:2014 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems

European Committee for Standardization (CEN), Surface Microhardness

EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)
EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness [Superseded: CEN EN 24498-1]
EN ISO 6769:2022 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
EN ISO 4516:2002 Metallic and Other Inorganic Coatings - Vickers and Knoop Microhardness Tests ISO 4516:2002
EN ISO 18203:2022 Steel - Determination of the thickness of surface-hardened layers (ISO 18203:2016)
EN ISO 643:2003 Steels - Micrographic determination of the apparent grain size ISO 643: 2003
EN 1043-2:1996 Destructive Tests on Welds in Metallic Materials - Hardness Test - Part 2: Micro Hardness Testing on Welded Joints
EN ISO 9015-2:2011 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
EN ISO 9015-2:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
EN 10328:2005 Iron and steel - Determination of the conventional depth and hardening after surface heating
EN 101:1984 Ceramic Tiles: Determination of Scratch Hardness of Surface According to Mohs
EN 101:1991 Ceramic Tiles - Determination of Scratch Hardness of Surface According to Mohs
prEN 10109-1-1991 Metallic materials; hardness test; part 1: Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T, and 45T)
EN 12829:2011 Surface active agents - Preparation of water with known calcium and magnesium hardness
EN 14954:2005 Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas
EN 13892-6:2002 Methods of test for screed materials - Part 6: Determination of surface hardness

GOSTR, Surface Microhardness

GOST R 59262-2020 Brown coals, hard coals and anthracite. Method for determination of microhardness and microbrittleness

RU-GOST R, Surface Microhardness

GOST 21206-1975 Coalsand anthracite. Determination method for microhardness and microbrittleness
GOST 9450-1976 Measurements microhardness by diamond instruments indentation
GOST R ISO 643-2011 Steels. Micrographic determination of the apparent grain size
GOST R ISO 643-2015 Steels. Micrographic determination of the apparent grain size
GOST 21318-1975 Measurement of microhardness by scratch diamond instruments
GOST 16241-1970 Chill moulds. Roughness of surface
GOST 25698-1998 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness
GOST 25698-1983 Powder articles. Methods of determination of hardness
GOST R 57930-2017 Polymer composites. Determination of surface profile at exposure in climatic conditions through 3D microscopy
GOST R ISO 27911-2015 State system for ensuring the uniformity of measurements. Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
GOST 29263-1991 Surface active agents. Preparation of water with known calcium hardness

CZ-CSN, Surface Microhardness

CSN 03 8159-1989 Microhardness tests of metallic coatings
CSN 67 3075-1956
CSN 72 5126-1987 Determination of scratch hardness of surface accordíng to Mohs
CSN 91 0275-1987 Furniture. Methods of determining the surface hardness
CSN 42 0448-1985 Steel. Determination of the effective depth of face hardened cases
CSN 91 0210 Cast.5-1979 Testing of furniture surfnce coating. Hardness of the coat
CSN 42 0372-1981 Testing of metals Rockwell superficial harelness test (N and T scales)
CSN ISO 410:1993 Metallic materials. Hardness test. Tables of brinell hardness values for use in tests made on flat surfaces

Professional Standard - Coal, Surface Microhardness

MT/T 264-1991 Method for Determination of Microhardness of Coal
MT 264-1991 Method for Determination of Microhardness of Coal

Lithuanian Standards Office , Surface Microhardness

LST EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
LST EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)
LST EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2011)
LST EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002)
LST EN ISO 9015-2:2011 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2003)
LST EN 15771-2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
LST EN 10328-2005 Iron and steel - Determination of the conventional depth of hardening after surface heating
LST EN 12829-2011 Surface active agents - Preparation of water with known calcium and magnesium hardness
LST EN ISO 14271:2011/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds - Technical Corrigendum 1 (ISO 14271:2011/Cor.1:2012)
LST EN 14954-2006 Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas

AENOR, Surface Microhardness

UNE-EN ISO 4498:2011 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
UNE-EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)
UNE 56743:1988 HARDBOARDS. DETERMINATION OF SURFACE FINISH (ROUGHNESS)
UNE-EN ISO 4516:2002 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests. (ISO 4516:2002)
UNE-EN 15771:2011 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
UNE-EN 12829:2011 Surface active agents - Preparation of water with known calcium and magnesium hardness
UNE-EN 10328:2007 Iron and steel - Determination of the conventional depth of hardening after surface heating
UNE-EN 14954:2006 Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas
UNE 7363:1978 DETERMINATION OF FULL AND EFFECTIVE THICKNESS OF SUPERFICIALLY HARDENED THIN LAYERS OF STEELS.

PT-IPQ, Surface Microhardness

(U.S.) Ford Automotive Standards, Surface Microhardness

FORD FLTM BP 106-04-2001 ELASTOMERIC MATERIALS MOUNTING FOR MICROHARDNESS TEST
FORD FLTM EU-BA 050-2-2000 DETERMINATION OF EFFECTIVE CASE DEPTH OF CASE HARDENED COMPONENTS
FORD FLTM EU-BA 050-02-2000 DETERMINATION OF EFFECTIVE CASE DEPTH OF CASE HARDENED COMPONENTS

BE-NBN, Surface Microhardness

NBN 748-21-1971
NBN B 15-225-1984
NBN-ISO 2174:1994 Surface active agents - Preparation of water with known calcium hardness
NBN T 63-119-1980 Surface active agents - Preparation of water with known calcium hardness
NBN B 27-205-1977
NBN B 27-006-1983

Group Standards of the People's Republic of China, Surface Microhardness

T/SZS 4018-2020 Hardness test method of precious metal jewelry Vickers hardness test method
T/CSIQ 3101-2015 Stereo microscope method for testing surface microstructure of ceramic works of art

PL-PKN, Surface Microhardness

PN B13150-1970 Glass Methodi of te?t Determination of micro-hardneis
PN B12038-06-1987 Ceramic tiles Determination of scratch hardness of surface according to Mohs
PN M05011-1971 Heat treatment of steel Determination of the surface hardened depth
PN-EN ISO 4499-2-2021-02 E Hardmetals -- Metallographic determination of microstructure -- Part 2: Measurement of WC grain size (ISO 4499-2:2020)

Professional Standard - Agriculture, Surface Microhardness

GB/T 4342-1991 Micro Vickers Hardness Test Method for Metals

Japanese Industrial Standards Committee (JISC), Surface Microhardness

JIS G 0551:2005 Steels -- Micrographic determination of the apparent grain size
JIS G 0551:2013 Steels.Micrographic determination of the apparent grain size
JIS G 0551:2020 Steels -- Micrographic determination of the apparent grain size
JIS R 1683:2007 Test method for surface roughness of ceramic thin films by atomic force microscopy
JIS R 1683:2014 Test method for surface roughness of ceramic thin films by atomic force microscopy
JIS G 0563:1993 Method of measuring surface hardness for nitrided iron and steel
JIS K 0147-2:2017 Surface chemical analysis -- Vocabulary -- Part 2: Terms used in scanning-probe microscopy
JIS B 7158-1:2010 Designation of microscope objectives -- Part 1: Flatness of field/Plan
JIS B 7132-1:2009 Microscopes -- Imaging distances related to mechanical reference planes -- Part 1: Tube length 160 mm

American Society for Testing and Materials (ASTM), Surface Microhardness

ASTM E384-05a Standard Test Method for Microindentation Hardness of Materials
ASTM E384-99e1 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-16 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-08ae1 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-09 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-10 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-10e1 Standard Test Method for Knoop and Vickers Hardness of Materials
ASTM B578-87(1999) Standard Test Method for Microhardness of Electroplated Coatings
ASTM B578-87(2004) Standard Test Method for Microhardness of Electroplated Coatings
ASTM B578-87(2009) Standard Test Method for Microhardness of Electroplated Coatings
ASTM B578-87(2015) Standard Test Method for Microhardness of Electroplated Coatings
ASTM E140-97e2 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-07 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E384-06 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-22 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-17 Standard Test Method for Microindentation Hardness of Materials
ASTM E140-12B(2019)e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-05 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-05e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-97e3 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-02e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-02 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-12b Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-12be1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM B578-21 Standard Test Method for Microindentation Hardness of Electroplated Coatings
ASTM B933-16 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
ASTM B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
ASTM B933-04 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
ASTM E18-00 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
ASTM E18-03e1 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
ASTM E18-03 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
ASTM E18-02 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
ASTM E18-05e1 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
ASTM E18-05 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
ASTM E18-20 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
ASTM F1438-93(2005) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM F1438-93(1999) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM F1438-93(2020) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM F1438-93(2012) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM B721-91(1999) Standard Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts (Withdrawn 2004)
ASTM D1622-93 Standard Test Method for Apparent Density of Rigid Cellular Plastics
ASTM D1622/D1622M-14 Standard Test Method for Apparent Density of Rigid Cellular Plastics
ASTM B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(1997) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B934-21 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements

National Metrological Technical Specifications of the People's Republic of China, Surface Microhardness

JJF 1252-1990 Technical specification for microscope hardness benchmark operation
JJF 1247-1990 Superficial Rockwell Hardness Benchmark Operation Technical Specifications
JJF 1248-1990 Superficial Rockwell hardness secondary benchmark operation technical specification

Professional Standard - Aerospace, Surface Microhardness

QJ 482-1990 Test method for microhardness of metal coatings
QJ 482-1979 Test method for microhardness of metal coatings

SE-SIS, Surface Microhardness

SIS SS-ISO 4516:1986 Metallic and related coatings - Vickers and Knoop microhardness tests
SIS 11 70 08-1975 Determination of case hardened depth in steel
SIS SS 11 70 11-1979 Sintered steel — Determination of case hardened depth
SIS SS 11 01 35-1984 Grey cast iron - Sampling for tensile testing, hardness testing and microstructure control
SIS 11 70 07-1975 Determination of hardened depth in steel after surface harden ing
SIS SS 11 01 37-1985 Cast iron - Malleable cast kon - Sampling for tensile testing, hardness testing and microstructure control
SIS SMS 2953-1971 Measurement of metal and oxide coating thicknesses by microscopic examination of cross-sections

Professional Standard - Light Industry, Surface Microhardness

QB/T 3822-1999 Hardness testing method of the metal deposits for the light industrial products.Microscopic hardness tester method
QB/T 4449-2013 Determination of peel strength of rigid overlaid materials in furniture surface
QB/T 3656-1999 Determination of peel strength of hard cladding materials on furniture surfaces

YU-JUS, Surface Microhardness

JUS D.E8.223-1979 Furniture. Determmation ofsurface hardness
JUS C.A4.033-1986 Tables of Vtckers hardness values for use In testmade on flatsurfaces —HV 5 to HV 100
JUS C.A4.032-1986 Tables of Brinell hardness values for use In tests made on flat surfaces
JUS C.A4.098-1995 Mechanical testing of metals - Tables of Vickers hardness values for use in tests made on flat surfaces - Less than HV 0,2
JUS C.A2.054-1987 Metals tests. Determination of total or effective thickness of thin surface-hardened layers of steels
JUS EN 101-1991 Ceramic tiles. Determination of scratch hardness of surface according to Mohs
JUS C.A4.055-1987 Mechanical testing of meta/s. Determination of apparent hardness ofs/nteres metal materials, excluding hardmeta/s. Case-hardened ferrous materials, surface enriched bycarbon orcarbon and nitrogen

GM Daewoo, Surface Microhardness

GMKOREA EDS-T-4571-2011 Test Procedure of Surface Hardness

Indonesia Standards, Surface Microhardness

SNI 13-4709-1998 Hardness testing of ore minerals by micro Vickers methods
SNI 05-0719-1989 Micro Vickers hardness test method load from 0,0098 t0 49 N
SNI 07-4979-1999 Tables of Brinell hardness values on flat surfaces of metallic plates
SNI 07-4906-1998 Vickers hardness values for use in tests made on flat surfaces of metals HV 0.2 less than HV 5 - Tables

ES-AENOR, Surface Microhardness

Taiwan Provincial Standard of the People's Republic of China, Surface Microhardness

CNS 7094-1983 Method of Micro - Hardness Test for Vickers and Knoop Hardness
CNS 7473-1986 Method of Rockwell Superficial Hardness Test
CNS 10422-1983 Rockwell and Rockwell Superficial Hardness Testing Machines
CNS 10423-1983 Method of Test for Rockwell and Rockwell Superficial Hardness Testing Machines
CNS 14289-2006 Method of measuring surface hardness for nitrided iron and steel
CNS 14289-1998 Method of measuring surface hardness for nitrided iron and steel
CNS 14306.3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306-3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 12114-1987 Measurement of Metal and Oxide Coating Thickness by Microscopic Examination of A Cross Section

Professional Standard - Machinery, Surface Microhardness

JB/T 7709-2007 Inspection method of microstructure, hardeness and depth of boronized layer
JB/T 7709-1995 Detection method of microstructure, hardness and layer depth of boronizing layer

American National Standards Institute （ANSI), Surface Microhardness

ANSI/SAE J864-1993 Surface Hardness Testing with Files

Society of Automotive Engineers (SAE), Surface Microhardness

SAE J864-1993 Surface Hardness Testing with Files
SAE J423-1998 Methods of Measuring Case Depth
SAE J864-1988 SURFACE HARDNESS TESTING WITH FILES

SAE - SAE International, Surface Microhardness

SAE J864-1984 Surface Hardness Testing with Files@ Recommended Practice
SAE J864-2018 Surface Hardness Testing with Files
SAE J864-1963 SURFACE HARDNESS TESTING WITH FILES

ES-UNE, Surface Microhardness

UNE-EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
UNE-EN ISO 18203:2022 Steel - Determination of the thickness of surface-hardened layers (ISO 18203:2016)
UNE-EN ISO 9015-2:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016)
UNE-EN ISO 6769:2023 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
UNE-EN ISO 7784-3:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016)
UNE-EN 15269-3:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016)
UNE 7363:1979 ERRATUM DETERMINATION OF FULL AND EFFECTIVE THICKNESS OF SUPERFICIALLY HARDENED THIN LAYERS OF STEELS.

NL-NEN, Surface Microhardness

NEN 5350-1970 Paints. Determination of surf ace hard ness by means of pencils

PK-PSQCA, Surface Microhardness

PS 610-1967 TABLES OF BRINELL HARDNESS VALUES (HB) FOR USE IN TESTS MADE ON FLAT SURFACE

Professional Standard - Aviation, Surface Microhardness

HB 5147-1996 Test method for Rockwell hardness on metal surface
HB 5147-1980 Test method for Rockwell hardness on metal surface
HB 5340-1989 Test method for micro-Vickers hardness of precious metals and their alloys for aviation
HB 5350.4-1986 Method for Determination of Surface Hardness of Investment Casting Mold Material

国家市场监督管理总局、中国国家标准化管理委员会, Surface Microhardness

GB/T 40128-2021 Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanosheets
GB/T 27552-2021 Destructive tests on welds in metallic materials—Microhardness testing of welded joints
GB/T 9790-2021 Metallic materials—Vickers and Knoop microhardness tests of metallic and other inorganic coatings

CL-INN, Surface Microhardness

INDITECNOR 31-7ch-1956

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Surface Microhardness

GB/T 36052-2018 Surface chemical analysis—Data transfer format for scanning probe microscopy
GB/T 33051-2016 Optical functional films—Superficial hardening film—Determination of thickness of hardening coating

AT-ON, Surface Microhardness

ONORM ISO 1302:1982 Technical drawings; Methods of indicating surface texture on drawings. Dessins techniques; Indication des etats de surface sur les dessins.
ONORM EN 101-1992 Ceramic tiles - Determination of Scratch hardness of surface according to Mohs

HU-MSZT, Surface Microhardness

VN-TCVN, Surface Microhardness

TCVN 4393-2009 Steels.Micrographic determination of the apparent grain size
TCVN 6415-18-2005 Ceramic floor and wall tiles.Test methods.Part 18: Determination of scratch hardness of surface according to Mohs'scale

AGMA - American Gear Manufacturers Association, Surface Microhardness

12FTM20-2012 The Effect of the Surface Roughness Profile on Micropitting

TR-TSE, Surface Microhardness

TS 3260-1978 DETERMINATION OF COMPRESSIVE STRENGTH OF CONCRETE BY SURFACE HARDNESS METHOD

AASHTO - American Association of State Highway and Transportation Officials, Surface Microhardness

T 80-2008 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
T 80-1994 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
T 80-2006 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
T 80-1996 Standard Specification for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials (Nineteenth Edition; ASTM E18-94)
T 80-2005 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials (ASTM Designation: E 18-03)
T 80-2003 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials (ASTM Designation: E 18-02)
T 80-2000 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials (Twentieth Edition; ASTM E18-98)

The American Road & Transportation Builders Association, Surface Microhardness

AASHTO T 80-2008 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

未注明发布机构, Surface Microhardness

DIN EN ISO 8503-3:1995 Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the DIN determination of surface profile using a focusing microscope
DIN EN 1043-2:1996 Destructive testing of welded joints on metallic materials Hardness testing DIN Part 2: Microhardness testing on welded joints
JIS K 0182:2023 Surface chemical analysis -- Scanning-probe microscopy -- Determination of cantilever normal spring constants

RO-ASRO, Surface Microhardness

STAS SR EN 101-1994 Ceramic tiles. Determination of scratch hardness of surface according to Mohs
STAS 8525-1984 Testings of metals ROCKWELL SUPERFICIAL HARDNESS TEST SCALES 'N AND T
SR ISO 4970:1994 Steel. Determination of total or effective thickness of thin surfacehardened layers
SR ISO 4498-2:1996 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen

BELST, Surface Microhardness

STB 2307-2013 Surface-hardened layers of metal. Methods for measuring the thickness

IN-BIS, Surface Microhardness

IS 13691-1993 Steel. Determination of total or effective thickness of thin surface-hardened layers
IS 5072-1988
IS 10588-1983

IT-UNI, Surface Microhardness

VE-FONDONORMA, Surface Microhardness

NORVEN 76-35-1965

ZA-SANS, Surface Microhardness

SANS 4516:1980 Metallic and related coatings - Vickers and Knoop microhardness tests

Professional Standard - Non-ferrous Metal, Surface Microhardness

YS/T 541-2006 Rockwell hardness test method for metal thermal sprayed coating surface

American Gear Manufacturers Association, Surface Microhardness

AGMA 91FTM17-1991 The Influence of Lubrication on the Onset of Surface Pitting in Machinable Hardness Gear Teeth

CU-NC, Surface Microhardness

NC 04-78-1987 Materials Testing. Determination of Superficially Hardened Layer Depth. Testing Methods

Standard Association of Australia （SAA）, Surface Microhardness

AS/NZS 8811.1:2013

未注明发布机构, Surface Microhardness

DIN EN ISO 8503-3:1995 Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the DIN determination of surface profile using a focusing microscope
DIN EN 1043-2:1996 Destructive testing of welded joints on metallic materials Hardness testing DIN Part 2: Microhardness testing on welded joints
JIS K 0182:2023 Surface chemical analysis -- Scanning-probe microscopy -- Determination of cantilever normal spring constants

ISUZU - Isuzu Motors Ltd., Surface Microhardness

ISC-F11-001-1970 Methods of Measuring Surface Hardness for Nitrided Iron and Steel (Japanese/English Version)

NO-SN, Surface Microhardness

NS 1181-1979 Metal and oxide coating - Measurement of thickness by microscopical examination of cross-sections

CH-SNV, Surface Microhardness

VSM 23890-1971