ZH
RU
ES

en Dimensional tolerances for aluminum alloys

en Dimensional tolerances for aluminum alloys, Total:491 items.

In the international standard classification, en Dimensional tolerances for aluminum alloys involves: Products of non-ferrous metals, Pipeline components and pipelines, Non-destructive testing, Non-ferrous metals, Linear and angular measurements, Iron and steel products, METALLURGY, Materials for aerospace construction, Bearings, Screw threads, Structures of buildings, Chipless working equipment.

Association Francaise de Normalisation, en Dimensional tolerances for aluminum alloys

NF A50-761:1970 ALUMINIUM AND ALUMINIUM ALLOYS. COILS. TOLERANCES ON DIMENSIONS.
NF E82-102:1982 ALUMINIUM AND ALUMINIUM ALLOY DROP FORGINS. DIMENSIONAL TOLERANCES.
NF A50-705:1984 ALUMINIUM AND ALUMINIUM ALLOYS. RECTANGULAR SECTION EXTRUDED BARS. DIMENSIONAL TOLERANCES AND RECOMMENDED DIMENSIONS.
NF A50-442:1996 Aluminium and aluminium alloys. Foil. Part 3 : tolerances on dimensions.
NF A50-706:1987 Aluminium and aluminium alloys. Angles. Dimension and form tolerance.
NF A50-821:1971 Aluminium and aluminium alloys. Cold formed sections produced by cold rolling. Dimensions and tolerances.
NF A50-440-3*NF EN 546-3:2007 Aluminium and aluminium alloys - Foil - Part 3 : tolerances on dimensions
NF EN 546-3:2007 Aluminium et alliages d'aluminium - Feuille mince - Partie 3 : tolérances sur dimensions
NF A50-703:1984 Aluminium and aluminium alloys. Square section extruded bars. Dimensional tolerances and recommended dimensions.
NF A50-737:1970 ALUMINIUM AND ALUMINIUM ALLOYS. DRAWN ROUND TUBES IN STRAIGHT LENGTHS OR COIL. TOLERANCES AND DIMENSIONS.
NF A50-702:1984 ALUMINIUM AND ALUMINIUM ALLOYS-CIRCULAR SECTION EXTRUDED BARS. DIMENSINAL TOLERANCES AND RECOMMENDED DIMENSIONS.
NF A50-704:1984 ALUMINIUM AND ALUMINIUM ALLOYS. HEXAGONAL SECTION EXTRUDED BARS. DIMENSIONAL TOLERANCES AND RECOMMENDED DIMENSIONS.
NF A50-802:1988 Aluminium and aluminium alloys. Large diameter welded tubes. Dimensions and tolerances.
NF A50-710:1981 Aluminium and aluminium alloys. Various extruded shapes. Tolerances and dimensions.
NF A50-708:1982 Aluminium and aluminium alloys. Extruded shape : tees. Tolerances and dimensions.
NF A50-709:1981 Aluminium and aluminium alloys. Extruded shapes ; channels. Tolerances and dimensions.
NF A50-670-3*NF EN 1301-3:2008 Aluminium and aluminium alloys - Drawn wire - Part 3 : tolerances on dimensions
NF A50-707:1981 Aluminium and aluminium alloys. Extruded shapes : I beams. Tolerances and dimensions.
NF A50-672:1997 Aluminium and aluminium alloys. Drawn wire. Part 3 : tolerances on dimensions.
NF EN 1301-3:2008 Aluminium et alliages d'aluminium - Fil étiré - Partie 3 : tolérances sur dimensions
NF A50-640-2:2008 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2 : tolerances on dimensions and form.
NF A50-640-2*NF EN 12020-2:2017 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2 : tolerances on dimensions and form
NF EN 12020-2:2022 Aluminium et alliages d'aluminium - Profilés de précision filés en alliages EN AW-6060 et EN AW-6063 - Partie 2 : tolérances sur dimensions et forme
NF A50-932-3*NF EN 586-3:2002 Aluminium and aluminium alloys - Forgings - Part 3 : tolerances on dimensions and form
NF A50-460-3*NF EN 683-3:2007 Aluminium and aluminium alloys - Finstock - Part 3 : tolerances on dimensions and form
NF EN 586-3:2002 Aluminium et alliages d'aluminium - Pièces forgées - Partie 3 : tolérances sur dimensions et forme
NF A50-922:2000 Aluminium and aluminium alloys - Wrought forging stock - Part 3 : tolerances on dimensions and form.
NF A50-420-2-2013+A1:2018 Aluminium and aluminium alloys - Wrought forging stock - Part 3 : tolerances on dimensions and form
NF A50-922*NF EN 603-3:2021 Aluminium and aluminium alloys - Wrought forging stock - Part 3 : tolerances on dimensions and form
NF A50-738:1987 Aluminium and aluminium alloys. Square and rectangular drawn tubes. Dimensions and form tolerances.
NF A50-462:1996 Aluminium and aluminium alloys. Finstock. Part 3 : tolerances on dimensions and form.
NF A50-911*NF EN 604-2:1997 Aluminium and aluminium alloys. Cast forging stock. Part 2 : tolerances on dimensions and form.
NF A50-712:1986 Aluminium and aluminium alloys. Round extruded tubes in coils for general purpose. Dimensions and form tolerances.
NF A51-413:1983 SEMI-FINISHED PRODUCTS OF COPPER AND COPPER ALLOYS. ROLLED ALUMINIUM BRONZE PRODUCTS. DIMENSIONS AND TOLERANCES.
NF A50-825:1971 Aluminium and aluminium alloys. Cold formed sections obtained by bending. Dimension tolerances.
NF EN 603-3:2021 Aluminium et alliages d'aluminium - Produits corroyés destinés à la forge - Partie 3 : tolérances sur dimensions et forme
NF EN 683-3:2007 Aluminium et alliages d'aluminium - Bandes pour échangeurs thermiques - Partie 3 : tolérances sur dimensions et forme
NF A66-002:1985 Foundry products. Aluminium alloys and zinc alloys. Cast products. Dimensional tolerances for pressure die castings.
NF A50-812*NF EN 1592-3:1997 Aluminium and aluminium alloys. HF seam welded tubes. Part 3 : tolerances on dimensions and form for circular tubes.
NF H44-006:1988 Aerosol dispensers. Containers in aluminium and alloys. Tolerances of the fundamental dimensions in connection with the clinch.
NF EN 604-2:1997 Aluminium et alliages d'aluminium - Produits coulés et destinés à la forge - Partie 2 : tolérances sur dimensions et forme.
NF EN 485-3:2003 Aluminium et alliages d'aluminium - Tôles, bandes et tôles épaisses - Partie 3 : tolérances de dimensions et de forme des produits laminés à chaud
NF EN 754-3:2008 Aluminium et alliages d'aluminium - Barres et tubes étirés - Partie 3 : barres rondes, tolérances sur dimensions et forme
NF EN 754-4:2008 Aluminium et alliages d'aluminium - Barres et tubes étirés - Partie 4 : barres carrées, tolérances sur dimensions et forme
NF A65-767:1981 Semi-finished products made of magnesium alloys. U-sections. Tolerances on dimensions and recommended dimensions.
NF A51-416:1989 SEMI-FINISHED COPPER AND COPPER ALLOY PRODUCTS. WROUGHT COPPER-ALUMINIUM BARS AND SECTIONS OBTAINED BY EXTRUSION OR FORGING. DIMENSIONS AND TOLERANCES.
NF A65-727:1988 Demi-produits en alliages de magnésium - Méplats filés - Dimensions et tolérances.
NF A50-423*NF EN 485-4:1994 Aluminium and aluminium alloys. Sheet, strip and plate. Part 4 : tolerances on shape and dimensions for cold-rolled products.
NF A50-422:1994 Aluminium and aluminium alloys. Sheet, strip and plate. Part 3 : tolerances on shape and dimensions for hot-rolled products.
NF A50-610-8*NF EN 754-8:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8 : porthole tubes, tolerances on dimensions and form
NF EN 754-5:2008 Aluminium et alliages d'aluminium - Barres et tubes étirés - Partie 5 : barres rectangulaires, tolérances sur dimensions et forme
NF EN 754-6:2008 Aluminium et alliages d'aluminium - Barres et tubes étirés - Partie 6 : barres hexagonales, tolérances sur dimensions et forme
NF EN 1592-3:1997 Aluminium et alliages d'aluminium - Tubes électrosoudés HF - Partie 3 : tolérances sur dimensions et forme des tubes à section circulaire.
NF EN 755-9:2016 Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 9 : profilés, tolérances sur dimensions et forme
NF EN 485-4:1994 Aluminium et alliages d'aluminium - Tôles, bandes et tôles épaisses - Partie 4 : tolérances sur forme et dimensions des produits laminés à froid.
NF A50-422*NF EN 485-3:2003 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3 : tolerances on dimensions and form for hot-rolled products
NF L15-313*NF EN 2044:2002 Aerospace series - Round bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm inferior or equal to D inferior or equal to 63 mm - Dimensions
NF EN 754-7:2016 Aluminium et alliages d'aluminium - Barres et tubes étirés - Partie 7 : tubes filés sur aiguille, tolérances sur dimensions et forme
NF EN 754-8:2016 Aluminium et alliages d'aluminium - Barres et tubes étirés - Partie 8 : tubes filés à pont, tolérances sur dimensions et forme
NF EN 755-3:2008 Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 3 : barres rondes, tolérances sur dimensions et forme
NF EN 755-4:2008 Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 4 : barres carrées, tolérances sur dimensions et forme
NF E82-201:1987 DROP FORGINGS OF COPPER AND COPPER ALLOYS. DIMENSIONAL AND GEOMETRICAL TOLERANCES.
NF A50-610-7:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7 : seamless tubes, tolerances on dimensions and form.
NF A50-610-3*NF EN 754-3:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3 : round bars, tolerances on dimensions and form
NF L15-335*NF EN 2045:2002 Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 6 mm inferior or equal to D inferior or equal to 50 mm - Dimensions
NF A50-612:1995 Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 3 : round bars, tolerances on dimensions and form.
NF A50-613:1995 Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 4 : square bars, tolerances on dimensions and form.
NF A50-614:1995 Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 5 : rectangular bars, tolerances on dimensions and form.
NF A50-610-7*NF EN 754-7:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7 : seamless tubes, tolerances on dimensions and form
NF A50-630-8*NF EN 755-8:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8 : porthole tubes, tolerances on dimensions and form
NF A50-630-9*NF EN 755-9:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9 : profiles, tolerances on dimensions and form
NF EN 755-6:2008 Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 6 : barres hexagonales, tolérances sur dimensions et forme
NF EN 755-5:2008 Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 5 : barres rectangulaires, tolérances sur dimensions et forme
NF E66-732*NF ISO 5407:1995 As-sintered hardmetal pellets used in heading dies. Dimensions and tolerances.
NF A65-777:1988 Demi-produits en alliages de magnésium - Tubes filés de section circulaire - Tolérances sur dimensions.
NF ISO 5407:1995 Noyaux bruts en métaux-durs pour matrices de frappe à froid - Dimensions et tolérances.
NF A50-610-8:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8 : porthole tubes, tolerances on dimensions and form.
NF A50-630-9:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9 : profiles, tolerances on dimensions and form.
NF A50-610-5*NF EN 754-5:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5 : rectangular bars, tolerances on dimensions and form
NF A50-610-4*NF EN 754-4:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4 : square bars, tolerances on dimensions and form
NF A50-630-7*NF EN 755-7:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7 : seamless tubes, tolerances on dimensions and form
NF EN 755-7:2016 Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 7 : tubes filés sur aiguille, tolérances sur dimensions et forme
NF EN 755-8:2016 Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 8 : tubes filés à pont, tolérances sur dimensions et forme
NF L15-130:1958 Semi-finished products made of metal or non-ferrous alloys. Titanium sheet, dimensions and tolerances.
NF A50-630-7:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7 : seamless tubes, tolerances on dimensions and form.
NF A50-610-6*NF EN 754-6:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6 : hexagonal bars, tolerances on dimensions and form
NF A50-633:1995 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 4 : square bars, tolerances on dimensions and form.
NF A50-634:1995 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 5 : rectangular bars, tolerances on dimensions and form.
NF A50-615:1995 Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 6 : hexagonal bars, tolerances on dimensions and form.
NF E22-513:1987 Plain bearings. Solid copper alloy bushes. Dimensions and tolerances.

British Standards Institution (BSI), en Dimensional tolerances for aluminum alloys

BS EN 546-3:1997 Specification for aluminium and aluminium alloys - Foil - Tolerances on dimensions
BS EN 546-3:2007 Aluminium and aluminium alloys - Foil - Tolerances on dimensions
BS EN 1301-3:1997 Aluminium and aluminium alloys - Drawn wire - Tolerances on dimensions
BS EN 1301-3:2008 Aluminium and aluminium alloys - Drawn wire - Tolerances on dimensions
BS EN 586-3:2002 Aluminium and aluminium alloys - Forgings - Tolerances on dimensions and form
BS EN 603-3:2000 Aluminium and aluminium alloys - Wrought forging stock - Tolerances on dimensions and form
BS EN 546-3:2006 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
BS EN 586-3:2001 Aluminium and aluminium alloys. Forgings. Tolerances on dimensions and form
BS EN 12020-2:2001 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063: Tolerances on dimensions and form
BS EN 12020-2:2008 Aluminium and aluminium alloys — Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 — Part 2: Tolerances on dimensions and form
BS EN 12020-2:2016 Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Tolerances on dimensions and form
BS EN 12020-2:2016(2017) Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Tolerances on dimensions and form
BS EN 604-2:1997 Aluminium and aluminium alloys - Cast forging stock - Tolerances on dimensions and form
20/30413862 DC BS EN 603-3. Aluminium and aluminium alloys. Wrought forging stock. Part 3. Tolerances on dimensions and form
21/30436227 DC BS EN 12020-2. Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Part 2. Tolerances on dimensions and form
BS EN 1592-3:1998 Aluminium and aluminium alloys - HF seam welded tubes - Tolerances on dimensions and form for circular tubes
BS EN 603-3:2021 Tracked Changes. Aluminium and aluminium alloys. Wrought forging stock. Tolerances on dimensions and form
BS EN 683-3:2007 Aluminium and aluminium alloys - Finstock - Tolerances on dimensions and form
BS EN 683-3:2006 Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form
BS EN 754-7:1998 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Seamless tubes, tolerances on dimensions and form
BS EN 754-7:2008 Aluminium and aluminium alloys — Cold drawn rod/bar and tube — Part 7: Seamless tubes, tolerances on dimensions and form
BS EN 485-3:2003 Aluminium and aluminium alloys - Sheet, strip and plate - Tolerances on dimensions and form for hot-rolled products
BS 6615:1996 Specification for dimensional tolerances for metal and metal alloy castings
BS EN 754-5:2008 Aluminium and aluminium alloys — Cold drawn rod/bar and tube — Part 5: Rectangular bars, tolerances on dimensions and form
BS EN 754-3:2008 Aluminium and aluminium alloys — Cold drawn rod/bar and tube — Part 3: Round bars, tolerances on dimensions and form
BS EN 754-7:2016 Tracked Changes. Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Seamless tubes, tolerances on dimensions and form
BS EN 754-8:2016 Tracked Changes. Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Porthole tubes, tolerances on dimensions and form
BS EN 754-4:2008 Aluminium and aluminium alloys — Cold drawn rod/bar and tube — Part 4: Square bars, tolerances on dimensions and form
BS EN 755-9:2008 Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 9: Profiles, tolerances on dimensions and form
BS EN 754-8:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Porthole tubes, tolerances on dimensions and form
BS EN 754-3:1996 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Round bars, tolerances on dimensions and form
BS EN 754-8:1998 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Porthole tubes, tolerances on dimensions and form
BS ISO 6361-3:2014 Wrought aluminium and aluminium alloys. Sheets, strips and plates. Strips: Tolerances on shape and dimensions
BS EN 1592-4:1998 Aluminium and aluminium alloys - HF seam welded tubes - Tolerances on dimensions and form for square, rectangular and shaped tubes
BS EN 754-6:2008 Aluminium and aluminium alloys — Cold drawn rod/bar and tube — Part 6: Hexagonal bars, tolerances on dimensions and form
BS EN 755-3:2008 Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 3: Round bars, tolerances on dimensions and form
BS EN 755-7:1998 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Seamless tubes, tolerances on dimensions and form
BS EN 755-9:2001 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Profiles, tolerances on dimensions and form
BS EN 755-9:2016 Tracked Changes. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Profiles, tolerances on dimensions and form
BS EN 755-7:2008 Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 7: Seamless tubes, tolerances on dimensions and form
BS EN 755-4:1996 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Square bars, tolerances on dimensions and form
BS EN 755-3:1996 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Round bars, tolerances on dimensions and form
BS EN 755-8:1998 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Porthole tubes, tolerances on dimensions and form
BS EN 755-4:2008 Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 4: Square bars, tolerances on dimensions and form
BS EN 755-7:2016 Tracked Changes. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Seamless tubes, tolerances on dimensions and form
BS EN 755-8:2016 Tracked Changes. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Porthole tubes, tolerances on dimensions and form
BS EN 755-5:2008 Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 5: Rectangular bars, tolerances on dimensions and form
BS EN 755-8:2008 Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 8: Porthole tubes, tolerances on dimensions and form
BS EN 755-6:1996 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Hexagonal bars, tolerances on dimensions and form
BS EN 755-5:1996 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Rectangular bars, tolerances on dimensions and form
BS ISO 6361-4:2014 Wrought aluminium and aluminium alloys. Sheets, strips and plates. Sheets and plates: Tolerances on shape and dimensions
BS EN 2046:2001 Hexagonal bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm a 50 mm - Dimensions
BS EN 755-6:2008 Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 6: Hexagonal bars, tolerances on dimensions and form
BS EN 754-6:1996 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Hexagonal bars, tolerances on dimensions and form
BS EN 2045:2001 Aerospace series - Square bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm a 50 mm - Dimensions
BS EN 2044:2001 Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm D 63 mm - Dimensions
BS ISO 6362-6:2012 Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles. Round, square, rectangular and hexagonal tubes. Tolerances on shape and dimensions
BS EN 754-5:1996 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Rectangular bars, tolerances on dimensions and form

VN-TCVN, en Dimensional tolerances for aluminum alloys

TCVN 5841-1994 Aluminium and aluminium alloys.Profiles.Tolerances on dimensions and forms
TCVN 5840-1994 Aluminium and aluminium alloys.Rectangular bars.Tolerances dimensions and forms
TCVN 5842-1994 Aluminium and aluminium alloys.Round, square and hexagonal bars.Tolerances on form and dimensions

CH-SNV, en Dimensional tolerances for aluminum alloys

VSM 14032.5-1950
VSM 18080.1-1971
SN 165 000-1988 Solar Energy: Terminology and Definitions
SN 234 311-1978 Stopvalves for water supply in buildings
VSM 18687.1-1964
VSM 15520-1973
SN ISO 871:1984 Textiles — Tests for colour fastnessSection Z01: Colour fastness to metals in the dye-bath:Chromium salts

European Committee for Standardization (CEN), en Dimensional tolerances for aluminum alloys

EN 546-3:2006 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
EN 546-3:1996 Aluminium and Aluminium Alloys - Foil - Part 3: Tolerances on Dimensions
EN 12020-2:2008 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
EN 12020-2:2001 Aluminium and Aluminium Alloys - Extruded Precision Profiles in Alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on Dimensions and Form
EN 12020-2:2016 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
prEN 604-2-1991 Cast forging stock in aluminium and aluminium alloys; part 2: dimensional tolerances
EN 1301-3:2008 Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
EN 1301-3:1997 Aluminium and Aluminium Alloys - Drawn Wire - Part 3: Tolerances on Dimensions
CEN EN 12020-2-2008 Aluminium and aluminium alloys — Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 — Part 2: Tolerances on dimensions and form
EN 12020-2:2022 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
EN 586-3:2001 Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form
prEN 546-3-1992 Aluminium and aluminium alloys; wrought products, foil; part 3: dimensional tolerances
prEN 12020-2-2021 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
EN 603-3:2000 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form
EN 604-2:1997 Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form
EN 603-3:2021 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form
EN 12020-2:2016/AC:2017 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
prEN 683-3-1992 Aluminium and aluminium alloys; wrought products, finstock; part 3: dimensional tolerances
EN 683-3:2006 Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form
EN 683-3:1996 Aluminium and Aluminium Alloys - Finstock - Part 3: Tolerances on Dimensions and Form
prEN 2044-1977 Round aluminium alloy bars, drawn; dimensions; tolerance h 11; aerospace series
prEN 2045-1977 Square aluminium alloy bars, drawn; dimensions; tolerance h 11; aerospace series
EN 1592-3:1997 Aluminium and Aluminium Alloys - HF Seam Welded Tubes - Part 3: Tolerances on Dimensions and Form for Circular Tubes
prEN 2046-1977 Hexagonal aluminium alloy bars, drawn; dimensions; tolerance h 11; aerospace series
EN 485-3:2003 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
EN 485-4:1993 Aluminium and aluminium alloys; sheet, strip and plate; part 4: tolerances on shape and dimensions for cold-rolled products
EN 754-7:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes@ tolerances on dimensions and form
EN 754-7:1998 Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 7: Seamless Tubes, Tolerances on Dimensions and Form
EN 485-3:1993 Aluminium and Aluminium Alloys - Sheet, Strip and Plate - Part 3: Tolerances on Shape and Dimensions for Hot-Rolled Products
prEN 485-3-1992 Aluminium and aluminium alloys; sheet, strip and plate; part 3: tolerances on shape and dimensions for hot-rolled products
prEN 485-4-1992 Aluminium and aluminium alloys; sheet, strip and plate; part 4: tolerances on shape and dimensions for cold-rolled products
EN 754-4:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
EN 754-3:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
EN 754-7:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
EN 755-9:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
EN 754-3:1995 Aluminium and Aluminium Alloys - Cold Drawn Rod/ Bar and Tube - Part 3: Round Bars, Tolerances on Dimensions and Form
EN 754-4:1995 Aluminium and Aluminium Alloys - Cold Drawn Rod/ Bar and Tube - Part 4: Square Bars, Tolerances on Dimensions and Form
EN 755-9:2001 Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 9: Profiles, Tolerances on Dimensions and Form
CEN EN 755-3-2008_ Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 3: Round bars, tolerances on dimensions and form
EN 754-8:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
EN 754-5:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
EN 754-8:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes@ tolerances on dimensions and form
EN 754-5:1995 Aluminium and Aluminium Alloys - Cold Drawn Rod/ Bar and Tube - Part 5: Rectangular Bars, Tolerances on Dimensions and Form
EN 754-8:1998 Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 8: Porthole Tubes, Tolerances on Dimensions and Form
EN 755-7:1998 Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 7: Seamless Tubes, Tolerances on Dimensions and Form
EN 755-8:1998 Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 8: Porthole Tubes, Tolerances on Dimensions and Form
EN 755-3:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
EN 755-4:2008 Aluminium and aluminium alloys - Extruded rod/bar@ tube and profiles - Part 4: Square bars@ tolerances on dimensions and form
EN 755-7:2016 Aluminium and aluminium alloys - Extruded rod/bar@ tube and profiles - Part 7: Seamless tubes@ tolerances on dimensions and form
EN 755-9:2016 Aluminium and aluminium alloys - Extruded rod/bar@ tube and profiles - Part 9: Profiles@ tolerances on dimensions and form
EN 754-6:1995 Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 6: Hexagonal Bars, Tolerances on Dimensions and Form
EN 755-3:1995 Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles - Part 3: Round Bars, Tolerances on Dimensions and Form
EN 755-8:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
prEN 905-4-1992 Wrought aluminium and aluminium alloys; cold drawn rod/bar and tube; part 4: drawn square bars; dimension and form tolerances
EN 754-6:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form

Danish Standards Foundation, en Dimensional tolerances for aluminum alloys

DS/EN 546-3:2007 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
DS/EN 1301-3:2008 Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
DS/EN 683-3:2007 Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form
DS/EN 12020-2:2008 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
DS/EN 586-3:2003 Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form
DS/EN 603-3:2000 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form
DS/EN 604-2:1997 Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form
DS/EN 603-3:2021 Aluminium and aluminium alloys – Wrought forging stock – Part 3: Tolerances on dimensions and form
DS/EN 1592-3:1998 Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes
DS 3016:1981 Wrought copper and copper alloys. Extruded round bars. Dimensions and tolerances
DS 3017:1981 Wrought copper and copper alloys. Extruded square bars. Dimensions and tolerances
DS 3019:1981 Wrought copper and copper alloys. Drawn round bars. Dimensions and tolerances
DS 3020:1981 Wrought copper and copper alloys. Drawn square bars. Dimensions and tolerances
DS 3023:1981 Wrought copper and copper alloys. Drawn round wire. Dimensions and tolerances
DS 3024:1981 Wrought copper and copper alloys. Drawn square wire. Dimensions and tolerances
DS/EN 754-8:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
DS/EN 6025:2021 Aerospace series – Plates – Aluminium alloy 2024 – Close tolerances flatness – Thickness – 6 mm ≤ a ≤ 55 mm – Dimensions
DS/EN 485-3:1993 Aluminium and aluminium alloys. Sheet, strip and plate. Part 3: Tolerances on shape and dimensions for hot-rolled products
DS/EN 485-4:1993 Aluminium and aluminium alloys. Sheet, strip and plate. Part 4: Tolerances on shape and dimensions for cold-rolled products
DS/EN 485-3:2005 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
DS/EN 485-4:2000 Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
DS/EN 754-3:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
DS/EN 754-4:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
DS 3018:1981 Wrought copper and copper alloys. Extruded hexagonal bars. Dimensions and tolerances
DS 3021:1981 Wrought copper and copper alloys. Drawn hexagonal bars. Dimensions and tolerances
DS/EN 754-6:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
DS/EN 754-7:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
DS/EN 755-8:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
DS 3022:1981 Wrought copper and copper alloys. Drawn rectangular bars. Dimensions and tolerances
DS 3025:1981 Wrought copper and copper allys. Drawn hexagonal wire. Dimensions and tolerances
DS/EN 1592-4:1998 Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes
DS/EN 754-5:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
DS/EN 755-3:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
DS/EN 755-4:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form
DS/EN 755-7:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
DS/EN 755-9:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
DS/EN 2044:2002 Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm < D < 63 mm - Dimensions
DS/EN 2045:2002 Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm < a < 50 mm - Dimensions
DS/EN 755-5:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form
DS/EN 755-6:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form

Lithuanian Standards Office , en Dimensional tolerances for aluminum alloys

LST EN 546-3-2007 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
LST EN 1301-3-2009 Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
LST EN 683-3-2007 Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form
LST EN 12020-2-2008 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
LST EN 586-3-2002 Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form
LST EN 603-3-2000 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form
LST EN 604-2-2000 Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form
LST EN 1592-3-2000 Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes
LST EN 754-8-2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
LST EN 485-4-2000 Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
LST EN 485-3-2003 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
LST EN 754-3-2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
LST EN 754-4-2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
LST EN 754-7-2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
LST EN 754-6-2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
LST EN 755-8-2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
LST EN 1592-4-2000 Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes
LST EN 755-4-2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form
LST EN 755-3-2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
LST EN 754-5-2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
LST EN 755-9-2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
LST EN 755-7-2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
LST EN 2045-2002 Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm < a < 50 mm - Dimensions
LST EN 2044-2002 Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm < D < 63 mm - Dimensions
LST EN 755-6-2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form
LST EN 755-5-2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form

AENOR, en Dimensional tolerances for aluminum alloys

UNE-EN 546-3:2008 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
UNE-EN 1301-3:2009 Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
UNE-EN 683-3:2008 Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form
UNE-EN 12020-2:2017 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
UNE-EN 586-3:2002 Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form
UNE-EN 603-3:2001 Aluminium and aluminium alloys. Wrought forging stock. Part 3: Tolerances on dimensions and form.
UNE-EN 604-2:1997 Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form
UNE-EN 1592-3:1998 Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes
UNE-EN 754-3:2009 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
UNE-EN 754-4:2009 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
UNE-EN 485-4:1994 Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
UNE-EN 485-3:2003 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
UNE-EN 754-6:2009 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
UNE-EN 755-3:2009 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
UNE-EN 755-4:2009 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form
UNE-EN 1592-4:1998 Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes
UNE-EN 754-5:2009 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
UNE-EN 755-5:2009 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form
UNE-EN 755-6:2009 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form

German Institute for Standardization, en Dimensional tolerances for aluminum alloys

DIN EN 546-3:2007 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions; English version of DIN EN 546-3:2007-03
DIN EN 546-3:2007-03 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions; German version EN 546-3:2006
DIN EN 683-3:2007-03 Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form; German version EN 683-3:2006
DIN EN 1301-3:1997 Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions; German version EN 1301-3:1997
DIN EN 12020-2:2023-02 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form; German version EN 12020-2:2022
DIN EN 586-3:2002 Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form; German version EN 586-3:2001
DIN EN 586-3:2002-02 Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form; German version EN 586-3:2001
DIN EN 603-3:2021-11 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form; German version EN 603-3:2021
DIN EN 1301-3:2008-12 Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions; German version EN 1301-3:2008
DIN EN 12020-2:2023 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
DIN EN 12020-2:2008 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form; English version of DIN EN 12020-2:2008-06
DIN EN 1301-3:2008 Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions; English version of DIN EN 1301-3:2008-12
DIN EN 603-3:2000 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form; German version EN 603-3:2000
DIN EN 604-2:1997-03 Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form; German version EN 604-2:1997
DIN EN 604-2:1997 Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form; German version EN 604-2:1997
DIN EN 603-3:2020 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form; German and English version prEN 603-3:2020
DIN EN 603-3:2021 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form; German version EN 603-3:2021
DIN EN 683-3:2007 Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form; English version of DIN EN 683-3:2007-03
DIN EN 1592-3:1997 Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes; German version EN 1592-3:1997
DIN EN 1592-3:1997-12 Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes; German version EN 1592-3:1997
DIN EN 12020-2:2017 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form; German version EN 12020-2:2016 + AC:2017
DIN EN 485-4:1994 Aluminium and aluminium alloys; sheet, strip and plate; part 4: tolerances on shape and dimensions for cold-rolled products; German version EN 485-4:1993
DIN EN 755-3:2008-06 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form; German version EN 755-3:2008
DIN EN 754-4:2008-06 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form; German version EN 754-4:2008
DIN EN 754-8:2016-10 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form; German version EN 754-8:2016
DIN EN 754-3:2008-06 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form; German version EN 754-3:2008
DIN EN 754-7:1998 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form; German version EN 754-7:1998
DIN EN 754-8:1998 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form; German version EN 754-8:1998
DIN EN 755-9:2001 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form; German version EN 755-9:2001
DIN EN 485-3:2003-06 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products; German version EN 485-3:2003
DIN EN 754-7:2016-10 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form; German version EN 754-7:2016
DIN EN 485-4:2019-05 Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products; German version EN 485-4:1993
DIN EN 754-6:2008-06 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form; German version EN 754-6:2008
DIN EN 755-9:2016-10 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form; German version EN 755-9:2016
DIN EN 754-5:2008-06 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form; German version EN 754-5:2008
DIN 59745:2004 Sheet of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form
DIN 59740:2004 Sheets of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
DIN EN 485-4:2019 Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
DIN EN 485-3:2003 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products; German version EN 485-3:2003
DIN EN 755-8:2016-10 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form; German version EN 755-8:2016
DIN EN 755-4:2008-06 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form; German version EN 755-4:2008
DIN 59780:2008 Round wire of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
DIN 59781:2008 Round wires of wrought nickel and wrought nickel alloys, drawn - Dimensions and tolerances on dimensions and form
DIN 59765:2008 Round bars of wrought nickel and wrought nickel alloys, drawn - Dimensions and tolerances on dimensions and form
DIN 59740:2004-07 Sheets of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
DIN 59745:2004-07 Sheet of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form
DIN 59763:2006-09 Rectangular bars of wrought nickel and nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
DIN EN 755-7:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form; German version EN 755-7:2016
DIN EN 755-7:1998 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form; German version EN 755-7:1998
DIN EN 755-8:1998 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form; German version EN 755-8:1998
DIN EN 754-7:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form; English version of DIN EN 754-7:2008-06
DIN EN 754-4:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form; English version of DIN EN 754-4:2008-06
DIN EN 755-9:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form; English version of DIN EN 755-9:2008-06
DIN EN 754-3:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form; English version of DIN EN 754-3:2008-06
DIN EN 755-7:2016-10 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form; German version EN 755-7:2016
DIN EN 755-6:2008-06 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form; German version EN 755-6:2008
DIN EN 755-5:2008-06 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form; German version EN 755-5:2008
DIN 59766:2008 Square bars of wrought nickel and wrought nickel alloys, drawn - Dimensions and tolerances on dimensions and form
DIN 59767:2008 Hexagonal bars of wrought nickel and wrought nickel alloys, drawn - Dimensions and tolerances on dimensions and form
DIN 59761:2006-09 Square bars of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
DIN 59766:2008-05 Square bars of wrought nickel and wrought nickel alloys, drawn - Dimensions and tolerances on dimensions and form
DIN 59781:2008-05 Round wires of wrought nickel and wrought nickel alloys, drawn - Dimensions and tolerances on dimensions and form
DIN 59765:2008-05 Round bars of wrought nickel and wrought nickel alloys, drawn - Dimensions and tolerances on dimensions and form
DIN 59760:2006-09 Round bars of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
DIN 59780:2008-05 Round wire of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
DIN 8141-1:1993 ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Nominal sizes, tolerances and limits of size
DIN 8141-1:1993-07 ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; nominal sizes, tolerances and limits of sizes
DIN 59760:1974 Round rod of wrought nickel and nickel alloys, hot rolled; dimensions, tolerances
DIN EN 754-7:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form; German version EN 754-7:2016
DIN EN 755-9:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form; German version EN 755-9:2016
DIN EN 754-5:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form; English version of DIN EN 754-5:2008-06
DIN EN 754-8:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form; English version of DIN EN 754-8:2008-06
DIN EN 2045:2003 Aerospace series - Square bars, drawn, in aluminium and aluminium alloys, tolerance class h11, thickness 6 mma50 mm - Dimensions; German and English version EN 2045:2001
DIN EN 1592-4:1997-12 Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes; German version EN 1592-4:1997
DIN 59767:2008-05 Hexagonal bars of wrought nickel and wrought nickel alloys, drawn - Dimensions and tolerances on dimensions and form
DIN EN 754-8:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form; German version EN 754-8:2016
DIN EN 755-7:2009 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form; English version of DIN EN 755-7:2009-07
DIN EN 755-7:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form; German version EN 755-7:2008
DIN EN 755-3:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form; English version of DIN EN 755-3:2008-06
DIN EN 754-6:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form; English version of DIN EN 754-6:2008-06
DIN EN 755-3:1995 Aluminium and aluminium alloys - Extruded rod/bar, tube and profile - Part 3: Round bars; tolerances on dimensions and form; German version EN 755-3:1995
DIN EN 2044:2003 Aerospace series - Round bars, drawn, in aluminium and aluminium alloys, tolerance class h11, diameter 4 mmD63 mm - Dimensions; German and English version EN 2044:2001
DIN EN 1592-4:1997 Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes; German version EN 1592-4:1997

International Organization for Standardization (ISO), en Dimensional tolerances for aluminum alloys

ISO 7271:2011 Aluminium and aluminium alloys - Foil and thin strip - Dimensional tolerances
ISO/TR 7735:1982 Wrought aluminium and aluminium alloys — Sheet — Tolerances on shape and dimensions
ISO 7271:1982 Aluminium and aluminium alloys; Foil and thin strip; Dimensional tolerances
ISO 7273:1981 Wrought aluminium and aluminium alloys; Extruded round bars; Tolerances on shape and dimensions
ISO 7274:1981 Wrought aluminium and aluminium alloys - Drawn round bars - Tolerances on shape and dimensions (All minus tolerances on diameter)
ISO 6361-3:1985 Wrought aluminium and aluminium alloy sheets, strips and plates; Part 3 : Strips; Tolerances on shape and dimensions (Previously referenced DIS 8219)
ISO 3486:1980 Wrought copper and copper alloys; Cold-rolled flat products delivered in straight lengths (sheet); Dimensions and tolerances
ISO 6361-4:1988 Wrought aluminium and aluminium alloy sheets, strips and plates; part 4: sheets and plates; tolerances on shape and dimensions
ISO 4379:1978 Plain bearings — Solid copper alloy bushes _ Dimensions and tolerances
ISO 6361-3:2011 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 3: Strips: Tolerances on shape and dimensions
ISO 6361-3:2014 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 3: Strips: Tolerances on shape and dimensions
ISO 6362-4:2022 Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Tolerances on form and dimensions for profiles
ISO 6362-3:1990 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 3: extruded rectangular bars; tolerances on dimensions and form
ISO 6363-6:2022 Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6: Tolerances on form and dimensions for drawn round tubes
ISO 5407:1981 As-sintered hardmetal pellets used in heading dies; Dimensions and tolerances

CZ-CSN, en Dimensional tolerances for aluminum alloys

CSN 42 7410-1964 Drawn aluminium and aluminium alloy wire, round, usual tolerances. Dimensions
CSN 42 8520-1966 Copper and copper alloy hot-pressed square bars, tolerances j 16. Dimensions
CSN 42 8524-1966 Copper and copper alloy hot-pressed flat bars, tolerances j 15. Dimensions
CSN 42 8510-1987 Copper and copper alloy extruded round bars tolerances j 16. Dimensions
CSN 42 8630-1966 Copper and copper alloy cold-drawn hexagonal bars, tolerances h .11. Dimensions
CSN 42 8640-1973 Nickel and nickel alloys.. Cold-drawn rods with permissible toleranoes h 12. Dimensions
CSN 42 8624-1966 Copper and copper alloy cold-drawn flat bars, tolerances h 13. Dimensions
CSN 42 8611-1994 Round bars of wrought copper and copper alloys, cold drawn, tolerances h 12. Dimensions
CSN 42 8612-1994 Round bars of wrought copper and copper alloys, cold drawn, tolerances h 11. Dimensions
CSN 42 8620-1994 Square bars of wrought copper and copper alloys, cold drawn, tolerances h 12. Dimensions
CSN 42 8621-1994 Square bars of wrought copper and copper alloys, cold drawn, tolerances h 11. Dimensions

Korean Agency for Technology and Standards (KATS), en Dimensional tolerances for aluminum alloys

KS D ISO 7274:2004 Wrought aluminium and aluminium alloys－Drawn round bars－Tolerances on shape and dimensions(All minus tolerances on diameter)
KS D ISO 7274-2004(2014) Wrought aluminium and aluminium alloys－Drawn round bars－Tolerances on shape and dimensions(All minus tolerances on diameter)
KS D ISO 5193:2004 Wrought aluminium and aluminium alloys－Drawn round bars－Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)
KS D ISO 5193-2004(2019) Wrought aluminium and aluminium alloys－Drawn round bars－Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)
KS D ISO 6361-4:2012 Wrought aluminium and aluminium alloys sheets, strips and plates-Part 4:Sheets and plates-Tolerances on shape and dimensions
KS D ISO 6361-4:2013 Wrought aluminium and aluminium alloys sheets, strips and plates－Part 4：Sheets and plates－Tolerances on shape and dimensions
KS D ISO 7773:2003 Magnesium alloys-Round bars and tubes-Dimensional tolerances
KS D ISO 7773-2003(2008) Magnesium alloys－Round bars and tubes－Dimensional tolerances
KS B 1510-2021 Basic dimensions and tolerances of copper alloy pipe flanges
KS D ISO 6361-3:2012 Wrought aluminium and aluminium alloys sheets, strips and plates-Part 3:Strips-Tolerances on shape and dimensions
KS D ISO 6361-3:2013 Wrought aluminium and aluminium alloys sheets, strips and plates－Part 3：Strips－Tolerances on shape and dimensions

YU-JUS, en Dimensional tolerances for aluminum alloys

JUS M.A1.436-1997 General tolerances - Tolerances for linear and angular dimension drop forgings of wrought aluminium and aluminium alloys
JUS M.A1.435-1994 Tolerances in mechanical engineering - Tolerances for sizes without tolerance indication - Deviations for sizes of sizes of wrought copper and copper alloys forgings
JUS M.C3.335-1988 Plain bearings. Solid copper alloy busbes. Dimensions and tolerances

未注明发布机构, en Dimensional tolerances for aluminum alloys

BS EN 12020-2:2022 Tracked Changes. Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Tolerances on dimensions and form
BS EN 485-4:1994(1998) Aluminium and aluminium alloys — Sheet, strip and plate — Part 4 : Tolerances on shape and dimensions for cold - rolled products

ES-UNE, en Dimensional tolerances for aluminum alloys

UNE-EN 12020-2:2023 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
UNE-EN 603-3:2022 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form
UNE-EN 586-3:2002 ERRATUM Aluminium and aluminium alloys- Forgings- Part 3: Tolerances on dimensions and form.
UNE-EN 754-8:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
UNE-EN 755-9:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
UNE-EN 754-7:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
UNE-EN 755-8:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
UNE-EN 755-7:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
UNE-EN 2044:2001 Aerospace series- Round bars, drawn, in aluminium and aluminium alloys- Tolerance class h 11- Diameter 4 mm <D< 63 mm- Dimensions. (Endorsed by AENOR in February of 2002.)
UNE-EN 2045:2001 Aerospace series- Square bars, drawn in aluminium alloys- Tolerance class h 11- Thickness 6 mm<a<50 mm- Dimensions. (Endorsed by AENOR in February of 2002.)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, en Dimensional tolerances for aluminum alloys

GB/T 14846-2014 Tolerances on dimensions and form of aluminium and aluminium alloy extruded profiles
GB/T 14846-2008 Aluminium and aluminium alloy extruded profiles.Tolerances on dimension and form
GB/T 14846-1993 Wrought aluminium and aluminium alloy extruded profiles.Toerances on dimensions and shape
GB/T 3194-1998 Wrought aluminium and aluminium alloy sheets and strips--Tolerances on form and dimensions
GB/T 4436-1995 Wrought aluminium and aluminium alloy tubes--Dimensions and deviations
GB/T 4436-2012 Wrought aluminum and aluminum alloy tubes.Dimensions and deviations
GB/T 8545-1987 Die forgings of aluminium and aluminium alloy--Dimensional tolerance and machining allowance
GB 8545-1987 Dimensional Deviation and Machining Allowance of Aluminum and Aluminum Alloy Die Forgings
GB/T 14846-2014(英文版) Tolerances on dimensions and form of aluminium and aluminium alloy extruded profiles
GB/T 8545-2012 Die forgings of aluminium and aluminium alloy.Dimensional tolerance and machining allowance
GB/T 3880.3-2006 Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering. Part 3: Tolerances on forms and dimensions
GB/T 3880.3-2012 Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering.Part 3:Tolerances on forms and dimensions

IT-UNI, en Dimensional tolerances for aluminum alloys

UNI 3813-1956
UNI EN 603-3-2021 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form

HU-MSZT, en Dimensional tolerances for aluminum alloys

MSZ 8271-1979

Professional Standard - Military and Civilian Products, en Dimensional tolerances for aluminum alloys

WJ 560-1975 Dimensions and shape tolerances of cemented carbide mold blanks

RO-ASRO, en Dimensional tolerances for aluminum alloys

STAS SR EN 485-3-1995 Aluminium and alurninium alloys. Sheet, strip and plate. Part 3: Tolerances on shape and dimensions for hot-rolled roducts
STAS SR EN 485-4-1995 Aluminium and aluminium alloys. Sheet, strip and plate. Part 4: Tolerances on shape and dimensions for cold-rolled products

AT-ON, en Dimensional tolerances for aluminum alloys

ONORM EN 485-3-1994 Aluminium and aluminium alloys. Sheet, strip and plate. Part 3: Tolerances on shape and dimensions for hot-rolled products
ONORM EN 485-4-1994 Aluminium and aluminium alloys. Sheet, strip and plate. Part 4: Tolerances on shape and dimensions for cold-rolled products
ONORM M 3522-1980 Round wires of wrought copper and copper alloys; drawn; dimensions with plus and minus tolerances

BE-NBN, en Dimensional tolerances for aluminum alloys

NBN-EN 485-4-1994 Aluminium and aluminium alloys. Sheet, strip and plate. Part 4: Tolerances on shape and dimensions for cold-rolled products
NBN-EN 485-3-1994 Aluminium and aluminium alloys. Sheet, strip and plate. Part 3: Tolerances on shape and dimensions for hot-rolled products

Aerospace, Security and Defence Industries Association of Europe (ASD), en Dimensional tolerances for aluminum alloys

ASD-STAN PREN 2615-1986 Aerospace Series Wire to Close Tolerance in Aluminium and Aluminium Alloys 1,6 Less Than or Equal to D Less Than or Equal to 9,6 mm Dimensions (Issue P 1)
ASD-STAN PREN 2045-1976 Square Aluminium Alloy Bars - Drawn Dimensions - Tolerance h 11 Aerospace Series (Edition 1)
ASD-STAN PREN 2616-1986 Aerospace Series Wire for Rivets in Aluminium and Aluminium Alloys Large Tolerances D Less Than or Equal to 10 mm Dimensions (Issue P 1)
ASD-STAN PREN 2046-1976 Hexagonal Aluminium Alloy Bars - Drawn Dimensions - Tolerance h 11 Aerospace Series (Edition 1)

Society of Automotive Engineers (SAE), en Dimensional tolerances for aluminum alloys

SAE J457-1985 CHEMICAL COMPOSITIONS, MECHANICAL PROPERTY LIMITS, AND DIMENSIONAL TOLERANCES OF SAE WROUGHT ALUMINUM ALLOYS
SAE J457-1991 Chemical Compositions, Mechanical Property Limits, and dimensional tolerances of SAE Wrought Aluminum Alloys

SAE - SAE International, en Dimensional tolerances for aluminum alloys

SAE J457-2017 Chemical Compositions@ Mechanical Property Limits@ and Dimensional Tolerances of SAE Wrought Aluminum Alloys

IN-BIS, en Dimensional tolerances for aluminum alloys

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, en Dimensional tolerances for aluminum alloys

PREN 2044-1976 Round Aluminium Alloy Bars - Drawn Dimensions - Tolerance H11 Aerospace Series (Edition 1)
PREN 2046-1976 Hexagonal Aluminium Alloy Bars - Drawn Dimensions - Tolerance h 11 Aerospace Series (Edition 1)
PREN 2045-1976 Square Aluminium Alloy Bars - Drawn Dimensions - Tolerance h 11 Aerospace Series (Edition 1)

KR-KS, en Dimensional tolerances for aluminum alloys

KS D ISO 6361-3-2012 Wrought aluminium and aluminium alloys sheets, strips and plates－Part 3：Strips－Tolerances on shape and dimensions
KS D ISO 6361-4-2012 Wrought aluminium and aluminium alloys sheets, strips and plates－Part 4：Sheets and plates－Tolerances on shape and dimensions

PT-IPQ, en Dimensional tolerances for aluminum alloys

NP EN 755-7-2000 Aluminium and aluminium alloys Extruded rod/bar,tube and profiles Part 7:Seambless tubes,tolerances on dimensions and form

SE-SIS, en Dimensional tolerances for aluminum alloys

SIS SS 21 53 32-1980 Wrought copper and copper alloys — Extruded square bars — Dimensions and tolerances
SIS SS 21 53 31-1980 Wrought copper and copper alloys - Drawn square bars — Dimensions and tolerances
SIS SS 21 52 62-1980 Wrought copper alloys — Brass — Drawn rectangular bars — Dimensions and tolerances
SIS SS 21 54 21-1980 Wrought copper and copper alloys — Extruded round bars — Dimensions and tolerances
SIS SS 21 54 11-1980 Wrought copper and copper alloys — Drawn round bars — Dimensions and tolerances
SIS SS 21 54 61-1980 Wrought copper and copper alloys — Drawn round wire — Dimensions and tolerances
SIS SS-EN 10 051-1992 Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels — Tolerances on dimensions and shape
SIS SS 21 53 81-1980 Wrought copper alloys — Brass — Drawn square wire — Dimensions and tolerances
SIS SS 21 53 42-1980 Wrought copper and copper alloys — Extruded hexagonal bars — Dimensions and tolerances
SIS SS 21 53 41-1980 Wrought copper and copper alloys — Drawn hexagonal bars — Dimensions and tolerances
SIS SS 21 53 91-1980 Wrought copper alloys — Brass — Drawn hexagonal wire — Dimensions and tolerances

PL-PKN, en Dimensional tolerances for aluminum alloys

PN-EN 6025-2021-08 E Aerospace series -- Plates -- Aluminium alloy 2024 -- Close tolerance flatness -- Thickness -- 6 mm ≤ a ≤ 55 mm -- Dimensions

European Association of Aerospace Industries, en Dimensional tolerances for aluminum alloys

AECMA PREN 6025-1997 Aerospace Series Plates in Aluminium Alloys Close Tolerance Flatness Thickness 6 mm Less than a Less than or Equal to 160 mm Dimensions Edition P 2
AECMA PREN 6025-1998 Aerospace Series Plates Aluminium Alloy 2024 Close-Tolerance Flatness Thickness 6 mm Less than a Less than or Equal to 55 mm Dimensions Edition P 3 [Superseded: ASD-STAN PREN 6025]

RU-GOST R, en Dimensional tolerances for aluminum alloys

GOST R 53464-2009 Metal and alloy castings. Dimensions and mass tolerances and machining allowances
GOST R 56355-2015 Cold formed sheet piling of non alloy steels.Tolerances on shape and dimensions
GOST 26645-1985 Metal and alloy castings. Dimensions and mass tolerances and machining allowances

CEN - European Committee for Standardization, en Dimensional tolerances for aluminum alloys

EN 755-7:2008 Aluminium and aluminium alloys — Extruded rod/bar@ tube and profiles — Part 7: Seamless tubes@ tolerances on dimensions and form
EN 755-8:2008 Aluminium and aluminium alloys - Extruded rod/bar@ tube and profiles - Part 8: Porthole tubes@ tolerances on dimensions and form

ZA-SANS, en Dimensional tolerances for aluminum alloys

SANS 50755-7:2005 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles Part 7: Seamless tubes, tolerances on dimensions and form