ZH
RU
ES
state cadmium limit
state cadmium limit, Total:315 items.
In the international standard classification, state cadmium limit involves: Food products in general, Quality, Mathematics, Plastics, Farming and forestry, Fertilizers, Ceramics, Galvanic cells and batteries, Metalliferous minerals, Bottles. Pots. Jars, Acoustics and acoustic measurements, Construction industry, Electronic components in general, Production in the chemical industry, Earthworks. Excavations. Foundation construction. Underground works, Soil quality. Pedology, Non-textile floor coverings, Wood, sawlogs and sawn timber, Lubricants, industrial oils and related products, Materials and articles in contact with foodstuffs, Non-ferrous metals, Beverages, Materials for the reinforcement of composites, Road vehicle systems, Structures of buildings, Kitchen equipment, Electrical accessories, Commercial vehicles, Analytical chemistry, Water quality, Air quality, Surface treatment and coating, Environmental testing, Inorganic chemicals, Lifting equipment, Chipless working equipment, Road engineering, Cereals, pulses and derived products, Inks. Printing inks, Finances. Banking. Monetary systems. Insurance, Products of the textile industry, Glass, Electric road vehicles, Construction equipment, Iron and steel products, Protection against dangerous goods, Earth-moving machinery, HEALTH CARE TECHNOLOGY, Waxes, bituminous materials and other petroleum products, Petroleum, petroleum products and natural gas handling equipment, Shafts and couplings, Space systems and operations, Protective equipment, Flexible drives and transmissions, Fluid power systems, Environmental protection, Semiconductor devices, Rectifiers. Convertors. Stabilized power supply, Agricultural machines, implements and equipment, Testing of metals, Shipbuilding and marine structures in general, Electrical engineering in general, Radiation protection, Railway rolling stock.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, state cadmium limit
- GB 15201-1994 Tolerance limit of cadmium in foods
- GB/T 10093-2009 Probabilistic limit states design(Normal-Normal mode)
- GB/T 10093-1988 Probabilistic limit states design (Normal-Normal mode)
- GB/T 14438-1993 Lower confidence limit of normal probability within specified limits
- GB/T 23349-2009 Ecological index of arsenic,cadmium,lead,chromium and mercury for fertilizers
- GB 14147-1993 Standard permissible limits of release of lead or cadmium from ceramic packaging vessel in contact with food
- GB/T 36144-2018 Limit on element content of lead, arsenic, cadmium, mercury, fluorine and chlorine in iron ore
- GB 19778-2005 Packaging glass containers-Release of lead cadmium arsenic and antimony-Permissible limits
- GB/Z 21274-2007 Determination of regulated substances(lead,mercury and cadmium)in electrical and electronic equipment
- GB/T 11791-1989 Upper confidence limits of coefficient of variation for normal distribution
- GB 12651-1990 Standard permissible limits of lead and cadmium release from ceramic ware in contact with food
- GB 8058-2003 Standard permissible limits and testing method for release of lead or cadmium from ceramic cookware
- GB 12651-2003 Standard permissible limits of lead and cadmium release from ceramic ware in contact with food
- GB/T 23739-2009 Soil quality.Analysis of available lead and cadmium contents in soils.Atomic absorption spectrometry
- GB/T 4885-2009 Lower confidence limit of reliability for complete sample from normal distribution
- GB/T 10094-2009 Confidence limits of quantile and coefficient of variation for normal distribution
- GB 24427-2009 Limitation of mercury,cadmium and lead contents for alkaline and non-alkaline zinc manganese dioxide batteries
- GB/T 4885-1985 One-sided reliability confidence lower limit (Normal distribution complete sample)
- GB/T 41676-2022 Cranes—General design—Limit states and proof of competence of forged steel hooks
- GB/Z 21277-2007 Rapid screening of lead,mercury,chromium,cadmium and bromine of regulated substances in electrical and electronic equipment.X-ray fluorescence spectrometry
- GB/T 26125-2011 Electrical and electronic products.Determination of six regulated substances(lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenl ethers)
- GB/T 25611-2010/ISO 10266:1992 Static method for determination of ramp limit values for earth-moving machinery and machine fluid systems
- GB/T 25611-2010 Earth-moving machinery.Deternination of slope limits for machine fluid systems operation.Static test method
- GB/T 23767-2009 General method for measuring solid chemicals fire limits in gaseous oxidants
- GB/T 32378-2015 Determination of long-term ultimate bending strain and long-term ultimate relative ring deformation of glass fiber reinforced thermosetting plastic (GRP) pipes in a wet environment
- GB/T 29167-2012 Petroleum and natural gas industries.Pipeline transportation systems.Reliability-based limit state methods
Professional Standard - Pharmaceutical Packaging, state cadmium limit
- YBB 0017-2005 Release of lead cadmium arsenic and antimony-permissible limits
- YBB 0018-2005 Standard permissible limits of lead and cadmium release from medicinal ceramic
国家市场监督管理总局、中国国家标准化管理委员会, state cadmium limit
- GB/T 38295-2019 Limits for lead, cadmium, hexavalent chromium, mercury in plastic materials
- GB 24427-2021 Content limitation of mercury, cadmium and lead for zinc anode primary battery
Professional Standard - Agriculture, state cadmium limit
- NY 659-2003 Residue limits for chromium,cadmium,mercury,arsenic and fluoride in tea
- NY 1110-2010 Water-soluble fertilizers-Content-limits of mercury, arsenic,cadmium, lead and chromium
- GB/T 14147-1993 Allowable Limits of Dissolution of Lead and Cadmium in Ceramic Packaging Containers
- NY 1110-2006 Water-soluber fertilizers.content-limit and determination of mercury,arsenic,cadmium,lead and chromium content
- GB 8058-1987 Permissible limits and detection methods for lead and cadmium dissolution in ceramic cookers
- 国卫办食品函〔2014〕377号 Reply letter from the General Office of the National Health and Family Planning Commission on the limit of cadmium in day lily
- NY 861-2004 Limits of eight elements in cereals,legume,tubes and its products
中华人民共和国国家卫生和计划生育委员会, state cadmium limit
- WS/T 113-1999 Biological limit values for occupational exposure to cadmium and its compounds
Canadian Standards Association (CSA), state cadmium limit
Institute of Electrical and Electronics Engineers (IEEE), state cadmium limit
- IEEE 1115-1992 Recommended practice for sizing nickel-cadmium batteries for stationary applications
- IEEE 1115-2000 Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
- IEEE 1115a-2007 Recommended practice for sizing nickel-cadmium batteries for stationary applications; Amendment 1: Additional discussion on sizing margins
Professional Standard - Ferrous Metallurgy, state cadmium limit
- YB/T 4383-2014 Iron ore limit element content of lead, arsenic, cadmium, mercury, fluorine and chlorine
PT-IPQ, state cadmium limit
IX-EU/EC, state cadmium limit
- (EU) No 488-2014 Amendment to the maximum limits for cadmium in food (EC) No 1881/2006
UY-UNIT, state cadmium limit
RU-GOST R, state cadmium limit
- GOST 30530-1997 Noise. Methods for calculation of limit admissible nose characteristics of stationary machines
- GOST R 50186-1992 Ceramic ware in contact with food. Release of lead and cadmium. Permissible limits
- GOST 29234.4-1991 Moulding sands. Method for determination of compressive strength in damp state
- GOST ISO 10266-2016 Earth-moving machiner. Determination of slope limits for machine fluid systems operation. Static test method
- GOST R 12.4.257-2011 Occupational safety standards system. Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Types 6 and PB [6])
CZ-CSN, state cadmium limit
US-FCR, state cadmium limit
International Organization for Standardization (ISO), state cadmium limit
- ISO/TR 11069:1995 Aluminium structures - Material and design - Ultimate limit state under static loading
- ISO/TR 11069:1995/Cor 1:1996 Aluminium structures - Material and design - Ultimate limit state under static loading; Technical Corrigendum 1
- ISO 8391-2:1986 Ceramic cookware in contact with food; Release of lead and cadmium; Part 2 : Permissible limits
- ISO 7086-2:2000 Glass hollowware in contact with food - Release of lead and cadmium - Part 2: Permissible limits
- ISO 17440:2014 Cranes - General design - Limit states and proof of competence of forged steel hooks
- ISO 4356:1977 Bases for the design of structures; Deformations of buildings at the serviceability limit states
- ISO 4531-2:1998 Vitreous and porcelain enamels - Release of lead and cadmium from enamelled ware in contact with food - Part 2: Permissible limits
- ISO/TR 4553:2022 Deformations and displacements of buildings and building elements at serviceability limit states
- ISO 16708:2006 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
- ISO 6486-2:1999 Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 2: Permissible limits
- ISO 10266:1992 Earth-moving machinery; determination of slope limits for machine fluid systems operation; static test method
- ISO 18072-1:2007 Ships and marine technology - Ship structures - Part 1: General requirements for their limit state assessment
Group Standards of the People's Republic of China, state cadmium limit
- T/LSXXX 003-2021 Permissible limits of biuret, arsenic, cadmium, lead, chromium, mercury and thallium in compound fertilizers
- T/CHTS 10045-2021 Technical Requirements for Dynamic Monitoring System of Highway Overload and Over-limited Freight Vehicles
- T/CHBAS 13-2021 Ecological environment risk division and guarantee limit of environmental pollution liability insurance
- T/GDNB 46-2021 Extraction of soil heavy metal bioavailability in paddy soil The diffusive gradients in thin film-inductively coupled plasma optical emission spectrometry
BE-NBN, state cadmium limit
AT-ON, state cadmium limit
IETF - Internet Engineering Task Force, state cadmium limit
- RFC 6608-2012 Subcodes for BGP Finite State Machine Error
- RFC 4702-2006 The Dynamic Host Configuration Protocol (DHCP) Client Fully Qualified Domain Name (FQDN) Option
- RFC 4704-2006 The Dynamic Host Configuration Protocol for IPv6 (DHCPv6) Client Fully Qualified Domain Name (FQDN) Option
- RFC 4703-2006 Resolution of Fully Qualified Domain Name (FQDN) Conflicts among Dynamic Host Configuration Protocol (DHCP) Clients
Professional Standard - Aerospace, state cadmium limit
- QJ 1384-1988 Normal distribution two-sided tolerance limit coefficient table
German Institute for Standardization, state cadmium limit
- DIN 18122-1:1997 Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit
- DIN 51032:2017-07 Ceramics, glass, glass ceramics - Permissible limits for the release of lead and cadmium from articles intended for use in contact with food
- DIN 51032:2017 Ceramics, glass, glass ceramics - Permissible limits for the release of lead and cadmium from articles intended for use in contact with food
- DIN 51032:1986 Ceramics, glass, glass ceramics, vitreous enamels; permissible limits for the release of lead and cadmium from articles intended for use in contact with foodstuffs
- DIN EN 13001-3-4:2019-12 Cranes - General design - Part 3-4: Limit states and proof of competence of machinery - Bearings; German version EN 13001-3-4:2018 / Note: Applies in conjunction with DIN EN 13001-1 (2015-06), DIN EN 13001-2 (2014-12).
- DIN EN 13001-3-1:2019-03 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure; German version EN 13001-3-1:2012+A2:2018 / Note: Applies in conjunction with DIN EN 13001-1 (2015-06), DIN EN 13001-2 (2014-12).*To be replaced by DIN EN 13001-3-...
- DIN EN 13001-3-1:2022-07 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure; German and English version prEN 13001-3-1:2022 / Note: Date of issue 2022-06-03*Intended as replacement for DIN EN 13001-3-1 (2019-03).
- DIN EN 13001-3-8:2022-02 Cranes - General design - Part 3-8: Limit states and proof competence of machinery Shafts; German and English version prEN 13001-3-8:2021 / Note: Date of issue 2022-01-07
- DIN EN 13001-3-8:2018 Cranes - General design - Part 3-8: Limit states and proof competence of machinery - Shafts; German and English version prEN 13001-3-8:2018
- DIN ISO 4531-2:2015 Vitreous and porcelain enamels - Release of lead and cadmium from enamelled ware in contact with food - Part 2: Permissible limits (ISO 4531-2:1998)
- DIN EN 13001-3-5/A1:2017 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks; German and English version EN 13001-3-5:2016/prA1:2017
- DIN EN ISO 16708:2006-08 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods (ISO 16708:2006); English version EN ISO 16708:2006
- DIN EN 13001-3-3:2015-02 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts; German version EN 13001-3-3:2014 / Note: Applies in conjunction with DIN EN 13001-1 (2009-12), DIN EN 13001-2 (2014-12).
- DIN EN 13001-3-6:2018 Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
- DIN EN 13001-3-6/A1:2020 Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders; German and English version EN 13001-3-6:2018/prA1:2020
- DIN EN 13001-3-6:2022-01 Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders; German version EN 13001-3-6:2018+A1:2021
- DIN 41773-2:1982 Static power convertors; semiconductor rectifier equipment with IU characteristic for charging of nickel cadmium batteries; requirements
- DIN 41775:1979-04 Static power convertors; semiconductor rectifier equipment with "W"-characteristic for charging of nickel/cadmium and nickel/iron batteries, requirements
- DIN CEN/TS 13001-3-2:2009 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version CEN/TS 13001-3-2:2008
- DIN EN ISO 16708:2006 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods (ISO 16708:2006); English version EN ISO 16708:2006
- DIN EN 13001-3-5:2022-05 Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks; German version EN 13001-3-5:2016+A1:2021 / Note: Applies in conjunction with DIN EN 13001-1 (2015-06), DIN EN 13001-2 (2021-12).
- DIN 41775:1979 Static power convertors; semiconductor rectifier equipment with "W"-characteristic for charging of nickel/cadmium and nickel/iron batteries, requirements
- DIN EN 13001-3-7:2019 Cranes - General design - Part 3-7: Limit states and proof of competence of machinery - Gears and gear boxes; German and English version prEN 13001-3-7:2019
- DIN EN 13001-3-2:2015-10 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version EN 13001-3-2:2014 / Note: Applies in conjunction with DIN EN 13001-1 (2015-06), DIN EN 13001-2 (2014-12).*To be amended by DIN EN ...
- DIN EN 62321:2009 Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) (IEC 62321:2008); German version EN 62321:2009
- DIN 27201-11:2004 State of railway vehicles - Basic principles and production technology - Part 11: Procedure for preparation of fault tolerance concept
- DIN 27201-11:2012 State of railway vehicles - Basic principles and production technology - Part 11: Procedure for preparation of fault tolerance concept
- DIN EN 13001-3-2/A1:2017 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German and English version EN 13001-3-2:2014/prA1:2017
American Society for Testing and Materials (ASTM), state cadmium limit
- ASTM F970-07 Standard Test Method for Static Load Limit
- ASTM F970-00 Standard Test Method for Static Load Limit
- ASTM F970-17 Standard Test Method for Static Load Limit
- ASTM F970-22 Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
- ASTM D6476-05 Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics
- ASTM D6476-00a Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics
- ASTM D6476-08 Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics
- ASTM D6479-11 Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
- ASTM D6476-12 Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics
- ASTM F1279-08(2014) Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces
- ASTM F1279-08 Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces
- ASTM F1279-19 Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces
RO-ASRO, state cadmium limit
- STAS 337/1-1988 WOOD Delermination of ultimatc strcngh in static bending
- STAS SR ISO 7086-2:1996 Glassware and glass ceramic ware in contact with food -Release of lead and cadmium Part 2: Permissible limits
National Aeronautics and Space Administration (NASA), state cadmium limit
AASHTO - American Association of State Highway and Transportation Officials, state cadmium limit
Indonesia Standards, state cadmium limit
- SNI ISO 3133:2010 Wood - Determination of ultimate strength in static bending
- SNI 19-6964.7-2003 Seawater quality - Part 7: Test methods of nitrates (NO3-N) with cadmium reduction by spectrophotometry
- SNI ISO 6486-1:2011 Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 1: Permissible limits
American Gear Manufacturers Association, state cadmium limit
- AGMA 12FTM17-2012 Dynamic Analysis of a Cycloidal Gearbox Using Finite Element Method
AGMA - American Gear Manufacturers Association, state cadmium limit
- 12FTM17-2012 Dynamic Analysis of a Cycloidal Gearbox Using Finite Element Method
Standard Association of Australia （SAA）, state cadmium limit
Society of Automotive Engineers (SAE), state cadmium limit
GOSTR, state cadmium limit
- GOST 25185.1-1995 Ceramic ware in contact with food. Release of lead and cadmium. Permissible limits
- GOST R ISO 7086-2-2016 Glass hollowware in contact with food. Release of lead and cadmium. Part 2. Permissible limits
Association Francaise de Normalisation, state cadmium limit
- NF B51-008:2017 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens
- NF E52-013-1:2013 Cranes - General Design - Part 3-1 : limit states and proof competence of steel structure
- NF E52-013-1/IN1:2013 Cranes - General design - Part 3-1 : limit states and proof competence of steel structure
- NF E52-013-1*NF EN 13001-3-1+A2:2018 Cranes - General Design - Part 3-1 : limit states and proof competence of steel structure
- NF E52-013-1/IN2*NF EN 13001-3-1/IN2:2018 Cranes - General Design - Part 3-1 : limit states and proof competence of steel structure
- NF E52-013-3*NF EN 13001-3-3:2014 Cranes - General design - Part 3-3 : limit states and proof of competence of wheel/rail contacts
- NF E58-140*NF ISO 10266:1995 Earth-moving machinery. Determination of slope limits for machine fluid systems operation. Static test method.
- NF M87-246*NF EN ISO 16708:2007 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
- NF E52-013-4*NF EN 13001-3-4:2018 Cranes - General Design - Part 3-4 : limit states and proof of competence of machinery - Bearings
- NF EN ISO 16708:2007 Industries du pétrole et du gaz naturel - Systèmes de transport par conduites - Méthodes aux états-limites basées sur la fiabilité
- NF E52-013-6*NF EN 13001-3-6+A1:2021 Cranes - General design - Part 3-6 : limit states and proof of competence of machinery - Hydraulic cylinders
- NF E52-013-6/IN1*NF EN 13001-3-6/IN1:2021 Cranes - General design - Part 3-6 : limit states and proof of competence of machinery - Hydraulic cylinders
- NF EN 16657/IN1:2018 Citernes destinées au transport de matières dangereuses - Dispositifs limiteurs de remplissage pour réservoirs statiques à bord de véhicules-citernes
- NF EN 16657+A1:2018 Citernes destinées au transport de matières dangereuses - Dispositifs limiteurs de remplissage pour réservoirs statiques à bord de véhicules-citernes
- NF EN 13001-3-5/IN1:2021 Appareils de levage à charge suspendue - Conception générale - Partie 3-5 : états limites et vérification des crochets forgés et moulés
- NF E52-013-2*NF EN 13001-3-2:2014 Cranes - General design - Part 3-2 : limit states and proof of competence of wire ropes in reeving systems
- NF EN 13001-3-2:2014 Appareils de levage à charge suspendue - Conception générale - Partie 3-2 : états limites et vérification d'aptitude des câbles en acier mouflés
- NF E52-013-5:2021 Cranes - General design - Part 3-5 : limit states and proof of competence of forged and cast hooks
- NF E52-013-5/IN1:2021 Cranes - General design - Part 3-5 : limit states and proof of competence of forged and cast hooks
- NF EN 13001-3-1/IN2:2018 Appareils de levage à charge suspendue - Conception générale - Partie 3-1 : états limites et vérification d'aptitude des charpentes en acier
- NF EN 13001-3-1+A2:2018 Appareils de levage à charge suspendue - Conception générale - Partie 3-1 : états limites et vérification d'aptitude des charpentes en acier
- NF S74-543:2005 Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (type 6 and Type PB (6) equipment).
- NF S74-543*NF EN 13034+A1:2009 Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (type 6 and Type PB [6] equipment)
- NF S74-543/IN1*NF EN 13034/IN1:2009 Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (type 6 and Type PB [6] equipment)
- NF EN 13001-3-5+A1:2021 Appareils de levage à charge suspendue - Conception générale - Partie 3-5 : états limites et vérification des crochets forgés et moulés
CN-Q/CR, state cadmium limit
Fujian Provincial Standard of the People's Republic of China, state cadmium limit
- DB35/ 1133-2011 Energy consumption limit per unit product of liquid-process liquor
- DB35/ 1131-2011 Energy consumption limit per unit product of solid-state liquor raw liquor
- DB35/ 1132-2011 Energy consumption limit per unit product of semi-solid liquor raw liquor
- DB35/ 1300-2012 Limits of Exhaust Pollutant Emissions for Light Vehicles with Ignition Engines in Simple Transient Conditions
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, state cadmium limit
- GB/T 33999-2017 Limits and determination of lead, cadmium, mercury, arsenic and hexavalent chromium in glass fiber
TH-TISI, state cadmium limit
- TIS 32-1985(en) CERAMIC WARE IN CONTACT WITH FOOD : PERMISSIBLE LIMITS AND METHOD OF TEST FOR LEAD AND CADMIUM
The American Road & Transportation Builders Association, state cadmium limit
ZA-SANS, state cadmium limit
- SANS 10163-1:2003 The structural use of timber Part 1: Limit-states design
- SANS 10162-2:1993 The structural use of steel Part 2: Limit-states design of cold-formed steelwork
- SANS 10162-4:1997 Structural use of steel Part 4: The design of cold-formed stainless steel structural members
- SANS 10162-2afr:1993 Staalbouwerk DeeL 2: Grenstoestandontwerp van koudgevormde staalwerk
- SANS 10162-1:2005 The structural use of steel Part 1: Limit-state design of hot-rolled steelwork
Professional Standard - Hydroelectric Power, state cadmium limit
- SD 280-1988 Technical specifications for static negative sequence inverse time lag current protection device
VN-TCVN, state cadmium limit
- TCVN 7147-2-2002 Glass hollowware in contact with food.Release of lead and cadmium.Part 2: Permissible limits
- TCVN 7148-2-2002 Ceramic cookware in contact with food.Release of lead and cadmium.Part 2: Permissible limits
- TCVN 7542-2-2005 Vitreous and porcelain enamels.Release of lead and cadmium from enamelled ware in contact with food.Part 2: permissible limits
- TCVN 7146-2-2002 Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food.Release of lead and cadmium.Part 2: Permissible limits
American National Standards Institute （ANSI), state cadmium limit
- ANSI/SAE J2180-1993 A Tilt Table Procedure for Measuring the Static Rollover Threshold for Heavy Trucks
- ANSI/IEEE 1115a:2007 Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications - Amendment 1: Additional Discussion on Sizing Margins
YU-JUS, state cadmium limit
- JUS D.A1.046-1979 Testing ofwood. Determination ofuttimate strength in static bending
National Metrological Technical Specifications of the People's Republic of China, state cadmium limit
- JJF 1738-2019 Calibration Specification for the Upper Limit of Dynamic Range of High Sound Pressure Measuring Microphones
Jiangsu Provincial Standard of the People's Republic of China, state cadmium limit
- DB32/T 3145-2016 Comprehensive energy consumption limit and calculation method for unit product of liquid milk
Tianjin Provincial Standard of the People's Republic of China, state cadmium limit
- DB12/ 499-2013 Sino-Singapore Tianjin Eco-City Remediation Limits of Polluted Water Sediments
- DB12/ 589-2015 Limits and measurement methods of exhaust pollutants from light-duty vehicles with ignition-ignition engines (steady-state method)
UNKNOWN, state cadmium limit
Guizhou Provincial Standard of the People's Republic of China, state cadmium limit
- DB52/T 1465-2019 Gradient Diffusion Thin Film (DGT) Method for Extracting Effective State of Heavy Metal Cadmium from Soil of Agricultural Products Origin
AENOR, state cadmium limit
- UNE 126301:2003 Glassware in contact with food. Release of lead and cadmium. Test method and permissible limits.
- UNE-EN 13001-3-1:2012+A1:2013 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
- UNE-EN 13001-3-3:2015 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
- UNE 115438:2000 EATRH-MOVING MACHINERY. DETERMINATION OF SLOPE LIMITS FOR MACHINE FLUID SYSTEMS OPERATION. STATIC TEST METHOD.
- UNE-EN 13001-3-5:2017 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
- UNE-EN 13034:2005+A1:2009 Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
- UNE-EN 13001-3-2:2015 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
Beijing Provincial Standard of the People's Republic of China, state cadmium limit
- DB11/ 122-2018 Pollutant Emission Limits and Measurement Methods of Gasoline Vehicles under Steady State Loading
- DB11/ 122-2006 Limits and measurement methods for exhaust pollutants from in-use gasoline vehicles under steady-state loaded mode
- DB11/ 122-2010 Pollutant Emission Limits and Measurement Methods for Steady-state Loading of In-use Gasoline Vehicles
- DB11/ 182-2003 Limits and measurement methods for exhaust pollutants from motorcycles & mopeds under steady-state loaded mode
Korean Agency for Technology and Standards (KATS), state cadmium limit
- KS D ISO 4531-2:2005 Vitreous and porcelain enamels-Release of lead and cadmium from enamelled ware in contact with food-Part 2:Permissible limits
- KS M ISO 1552:2012 Liquid chlorine for industrial use-Method of sampling(for determining only the volumetric chlorine content)
- KS F ISO 4356:2002 Bases for the design of structures-Deformations of buildings at the serviceability limit states
- KS M ISO 1552:2013 Liquid chlorine for industrial use－Method of sampling(for determining only the volumetric chlorine content)
- KS D ISO 4531-2-2015(2020) Vitreous and porcelain enamels－Release of lead and cadmium from enamelled ware in contact with food－Part 2：Permissible limits
- KS B ISO 17440:2021 Cranes — General design — Limit states and proof of competence of forged steel hooks
- KS F ISO 4356-2002(2012) Bases for the design of structures－Deformations of buildings at the serviceability limit states
- KS B ISO 17440:2016 Cranes — General design — Limit states and proof of competence of forged steel hooks
- KS B ISO 10266-2012(2017) Earth-moving machinery－Determination of slope limits for machine fluid systems operation－Static test method
- KS B ISO 10266-2012(2022) Earth-moving machinery－Determination of slope limits for machine fluid systems operation－Static test method
- KS B ISO 10266:2012 Earth-moving machinery-Determination of slope limits for machine fluid systems operation-Static test method
British Standards Institution (BSI), state cadmium limit
- BS EN 13001-3-1:2012+A1:2013 Cranes. General Design. Limit States and proof competence of steel structure
- BS EN 13001-3-5:2016 Cranes. General design. Limit states and proof of competence of forged hooks
- BS EN 13001-3-1:2012+A2:2018 Cranes. General Design. Limit States and proof competence of steel structure
- BS DD CEN/TS 13001-3.1:2004 Cranes - General design - Part 3.1: Limit states and proof of competence of steel structures
- BS DD CEN/TS 13001-3-5:2010 Cranes - General design - Limit states and proof of competence of forged hooks
- BS EN 13001-3-1:2012 Cranes. General Design. Limit States and proof competence of steel structure
- BS DD CEN/TS 13001-3.1:2005 Cranes. General design. Limit states and proof of competence of steel structures
- BS EN 13001-3-6:2018+A1:2021 Cranes. General Design. Limit States and proof competence of steel structure
- BS EN 13001-3-4:2018 Cranes. General Design. Limit States and proof competence of steel structure
- BS EN 13001-3-5:2016+A1:2021 Cranes. General design. Limit states and proof of competence of forged hooks
- BS EN 13001-3-3:2014 Cranes. General design. Limit states and proof of competence of wheel/rail contacts
- BS ISO 17440:2014 Cranes. General design. Limit states and proof of competence of forged steel hooks
- 17/30357383 DC BS EN 13001-3-2 AMD1. Cranes. General design. Part 3-2. Limit states and proof of competence of wire ropes in reeving systems - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
- BS DD 226:1996 Method for determining resistance to permanent deformation of bituminous mixtures subject to unconfined dynamic loading
- BS EN ISO 16708:2006 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
- BS ISO 14953:2000 Space systems. Structural design. Determination of loading levels for static qualification testing of launch vehicles
- BS EN 13001-3-2:2014 Cranes. General design. Limit states and proof of competence of wire ropes in reeving systems
- BS DD CEN/TS 13001-3-2:2004 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
- BS DD CEN/TS 13001-3-2:2005 Cranes. General design. Limit states and proof of competence of wire ropes in reeving systems
- BS 6911-8:1993 Testing earth-moving machinery. Determination of slope limits for machine fluid systems operation (static test method)
- 22/30440249 DC BS EN 13001-3-1. Cranes. General design - Part 3-1. Limit states and proof competence of steel structure
- BS EN 13034:2005+A1:2009 Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
- BS EN 13034:2005 Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (type 6 and type PB [6] equipment)
- 18/30360270 DC BS EN 13001-3-8. Cranes. General design - Part 3-8. Limit states and proof competence of machinery. Shafts
- 21/30437147 DC BS EN 13001-3-8. Cranes. General design. Limit states and proof competence of machinery - Part 3-8. Shafts
Professional Standard - Light Industry, state cadmium limit
- QB 2930.2-2008 Limits and determination method of certain toxic elements in printing ink.Part 2:lead、mercury、cadmium、chromium(Ⅵ)
国家发展和改革委员会, state cadmium limit
- QB/T 2930.2-2008 Limits of certain harmful elements in inks and their determination methods Part 2: Lead, mercury, cadmium, hexavalent chromium
IT-UNI, state cadmium limit
API - American Petroleum Institute, state cadmium limit
- API PUBL 4398-1985 Oil Spill Response Options for Minimizing Adverse Ecological Impacts (Withdrawn)
- API RP 1111-1999 Design@ Construction@ Operation@ and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design) (Third Edition)
KR-KS, state cadmium limit
- KS B ISO 17440-2021 Cranes — General design — Limit states and proof of competence of forged steel hooks
- KS B ISO 17440-2016 Cranes — General design — Limit states and proof of competence of forged steel hooks
国家能源局, state cadmium limit
- SY/T 7392-2017 Offshore oil and gas pipeline design, construction, operation and maintenance (limit state design)
European Committee for Standardization (CEN), state cadmium limit
- EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
- EN 13001-3-1:2012 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure (Incorporates Amendment A1: 2013)
- EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
- prEN 13001-3-1 Cranes - General design - Part 3-1: Limit states and proof competence of steel structure
- prEN 13001-3-8 Cranes - General design - Limit states and proof competence of machinery - Part 3-8: Shafts
- PD CEN/TS 13001-3-5:2010 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
- EN ISO 16708:2006 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
- EN 13001-3-2:2014 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
- EN 13001-3-6:2018 Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
- EN 13001-3-6:2018+A1:2021 Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
- prEN 13001-3-5 rev Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks
- PD CEN/TR 10364:2016 Steels and cast irons - Determination of lead@ cadmium@ mercury@ hexavalent chromium@ polybrominated biphenyls (PBB) and polybrominated diphenylethers (PBDE) with regard to directives 2011/65/EU (RoHS) and 2000/53/EC (ELV) - Limitations
- EN 13001-3-1:2012+A1:2013 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
- EN 13001-3-5:2016+A1:2021 Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks
International Electrotechnical Commission (IEC), state cadmium limit
- IEC TR2 61382-1:1996 Nickel/cadmium rechargeable cells and batteries for electric road vehicle propulsion applications - Part 1: Dynamic discharge performance test (DDPT) and dynamic endurance test (DET)
- IEC TR 61382-1:1996 Nickel/cadmium rechargeable cells and batteries for electric road vehicle propulsion applications - Part 1: Dynamic discharge performance test (DDPT) and dynamic endurance test (DET)
Professional Standard - Machinery, state cadmium limit
- JB/T 7691-1995 Engineering machinery Test method for limit ramp way (static state) of operation of machine's hydraulic system
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., state cadmium limit
- ASHRAE 4316-1999 Transient Two-Dimensional Finite Volume Model for the Simulation of Vertical U-Tube Ground Heat Exchangers
Shanghai Provincial Standard of the People's Republic of China, state cadmium limit
- DB31/ 643-2012 Allowable values of energy efficiency and energy efficiency grades for quick-freezing devices (fluidized, spiral, flat)
- DB31/ 357-2006 Limits for exhaust pollutant from in-use light-duty spark ignition vehicles under short transientdriving cycle
- DB31/ 357-2015 Limits of Exhaust Pollutant Emissions for Light Vehicles with Ignition Engines in Simple Transient Conditions
Underwriters Laboratories (UL), state cadmium limit
- UL 2367 CRD-2010 UL Standard for Safety Solid State Overcurrent Protectors - Section / Paragraph Reference: Table 1.1, Table 1.2, 1.6, 9B, 22.3 Subject: Evaluation of Special Purpose Solid-State Overcurrent Protectors (IC Current Limiters) for Use as Limited Power Source
U.S. Military Regulations and Norms, state cadmium limit
Hainan Provincial Standard of the People's Republic of China, state cadmium limit
- DB46/ 231-2012 Limits of Exhaust Pollutant Emissions from In-use Ignition Engine Vehicles (Steady State Method)
Sichuan Provincial Standard of the People's Republic of China, state cadmium limit
- DB51/T 2113-2016 Determination of chromium, copper, cadmium and lead in soil samples for ecological geochemical evaluation by inductively coupled plasma mass spectrometry
- DB51/T 2226-2016 Method for determination of static longitudinal and lateral limit tilt angles of wheeled farm machinery in hilly areas
Danish Standards Foundation, state cadmium limit
- DS/EN ISO 16708:2006 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
- DS/EN 13001-3-1+A1:2013 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
- DS/CEN/TS 13001-3-5:2010 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
- DS/EN 13034+A1:2009 Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
- DS/EN 13001-3-6:2021 Cranes – General design – Part 3-6: Limit states and proof of competence of machinery – Hydraulic cylinders
- DS/EN 13001-3-5:2021 Cranes – General design – Part 3-5: Limit states and proof of competence of forged and cast hooks
- DS/CEN/TS 13001-3-2:2008 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
CEN - European Committee for Standardization, state cadmium limit
- PREN 13001-3-8-2018 Cranes - General design - Part 3-8: Limit states and proof competence of machinery - Shafts
- EN 13001-3-4:2018 Cranes - General design - Part 3-4: Limit states and proof of competence of machinery - Bearings
- PREN 13001-3-4-2016 Cranes - General design - Part 3-4: Limit states and proof of competence of machinery - Bearings
- PREN 13001-3-7-2019 Cranes - General design - Part 3-7: Limit states and proof of competence of machinery - Gears and gear boxes
- EN 13001-3-5:2016/PRA1:2017 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
Lithuanian Standards Office , state cadmium limit
- LST EN 13001-3-1-2012 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
- LST EN 13034-2005+A1-2009 Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
- LST EN 13001-3-6+A1-2021 Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
- LST EN ISO 16708:2006 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods (ISO 16708:2006)
- LST EN 13001-3-5+A1-2021 Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks
American Petroleum Institute (API), state cadmium limit
- API RP 1111-2015(2021) Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design) (FIFTH EDITION)
ES-UNE, state cadmium limit
- UNE-EN 13001-3-1:2012+A2:2018 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
- UNE-EN ISO 16708:2006 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods (ISO 16708:2006) (Endorsed by AENOR in June of 2006.)
- UNE-EN 13001-3-4:2018 Cranes - General design - Part 3-4: Limit states and proof of competence of machinery - Bearings (Endorsed by Asociación Española de Normalización in March of 2019.)
- UNE-EN 13001-3-6:2018+A1:2022 Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
- UNE-EN 13001-3-5:2017+A1:2021 Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks
Anhui Provincial Standard of the People's Republic of China, state cadmium limit
- DB34/ 1444-2011 Limits for exhaust pollutant from in-use light-duty spark ignition vehicles under steady- state mode conditions
Xinjiang Provincial Standard of the People's Republic of China, state cadmium limit
- DB65/T 2881-2008 Limits for exhaust pollutant from in-use light-duty vehicles equipped ignition engie under steadystate mode conditions
- DB65/ 2881-2008 Exhaust pollutant emission limits of light-duty vehicles with ignition engines under steady-state operating conditions
- DB65/T 2880-2008 Limits for exhaust pollutants from in-use light-duty vehicle equipped ignition engine under simple transient driving mode conditions
Jilin Provincial Standard of the People's Republic of China, state cadmium limit
- DB22/T 1536-2011 Exhaust pollutant emission limits and measurement methods for light-duty gasoline vehicles under steady-state conditions
ETSI - European Telecommunications Standards Institute, state cadmium limit
- ETR 217-1995 Universal Personal Telecommunication (UPT); Phase 1 (Restricted UPT Service Scenario); User Procedures and User States
未注明发布机构, state cadmium limit
- DIN EN 13001-3-4:2019 Cranes – General construction – Part 3-4: Limit states and safety evidence for mechanical components – Bearings
European Telecommunications Standards Institute (ETSI), state cadmium limit
- ETSI ETR 217-1995 Universal Personal Telecommunication (UPT); Phase 1 (Restricted UPT Service Scenario); User Procedures and User States
Jiangxi Provincial Standard of the People's Republic of China, state cadmium limit
- DB36/ 617-2011 Limits of Exhaust Pollutant Emissions for Light Vehicles with Ignition Engines in Simple Transient Conditions
PL-PKN, state cadmium limit
Heilongjiang Provincial Standard of the People's Republic of China, state cadmium limit
- DB23/ 1061-2013 Limits and Measurement Methods of Exhaust Pollutants from In-use Vehicles with Ignition Engines (Steady Loading Condition Method)