ZH
RU
ES
How to choose a gas detector
How to choose a gas detector, Total:94 items.
In the international standard classification, How to choose a gas detector involves: Occupational safety. Industrial hygiene, Non-destructive testing, Explosion protection, Measurement of volume, mass, density, viscosity, Alarm and warning systems, Electrical equipment for working in special conditions, Protective equipment, Electromagnetic compatibility (EMC), Linear and angular measurements, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Pipeline components and pipelines, Air quality, Water quality, Power stations in general, Electrical engineering in general, Fuels, Corrosion of metals, Protection against fire, Electrical wires and cables, Soil quality. Pedology, Wastes.
Occupational Health Standard of the People's Republic of China, How to choose a gas detector
- GBZ/T 222-2009 Guideline for selection of direct-reading gas detector in the confined space
Association Francaise de Normalisation, How to choose a gas detector
- NF EN 13625:2002 Essais non destructifs - Contrôle d'étanchéité - Guide pour la sélection des instruments utilisés pour le mesurage des fuites gazeuses
- NF C23-541-2:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2 : performance requirements for apparatus for the detection of combustible gases.
- NF C23-570:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
- NF C23-570*NF EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
- NF C23-544*NF EN 50244:2016 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
- NF EN 14624:2020 Performances des détecteurs de fuites portables et des détecteurs de gaz fixes pour tous les fluides frigorigènes
- NF EN 50244:2016 Appareils électriques pour la détection des gaz combustibles dans les locaux à usage domestique - Guide de sélection, d'installation, d'utilisation et de maintenance
- NF E35-422*NF EN 14624:2020 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- NF EN 45544-4:2016 Atmosphères des lieux de travail - Appareillage électrique utilisé pour la détection directe des vapeurs et gaz toxiques et le mesurage direct de leur concentration - Partie 4 : guide de sélection, d'installation, d'utilisation et d'entretien
- NF C23-541-1/A1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
- NF C23-541-1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
- NF X43-016:1977 Method for the determination of an acid gas pollution index(expressed as SO2 equivalent)using a continuous sampling automatic sequential analyser.
- NF X43-246-4*NF EN 45544-4:2016 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4 : guide for selection, installation, use and maintenance
European Committee for Standardization (CEN), How to choose a gas detector
- EN 13625:2001 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
- EN 50244:2000 Electrical Apparatus for the Detection of Combustible Gases in Domestic Premises - Guide on the Selection, Installation, Use and Maintenance
- EN 45544-4:1999 Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 4: Guide for Selection, Installation, Use and Maintenance
- CEN EN 15308-2008 Characterization of
waste — Determination
of selected
polychlorinated
biphenyls (PCB) in
solid waste by using
capillary gas
chromatography with
electron capture or
mass spectrometric
detection
German Institute for Standardization, How to choose a gas detector
- DIN EN 13625:2002-03 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001
- DIN EN 50270:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2006
- DIN EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001
- DIN 2271-3:2000 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing
- DIN EN 14624:2020 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- DIN EN 14624:2020-08 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants; German version EN 14624:2020
- DIN EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2015
- DIN EN 45544-3:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection; German version EN 45544-3:2015
- DIN EN 50271:2011 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies; German version EN 50271:2010
- DIN EN 45544-4:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance; German version EN 45544-4:1999
- DIN EN 50267-1:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus; German version EN 50267-1:1998
- DIN EN 45544-2:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement; German version EN 45544-2:2015
- DIN EN 45544-4:2017 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance; German version EN 45544-4:2016
British Standards Institution (BSI), How to choose a gas detector
- BS EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
- BS EN 13625:2002(2007) Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
- BS EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Performance requirements for apparatus for the detection of combustible gases
- BS EN 50244:2000 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
- BS EN 45544-3:2015 Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requirements for apparatus used for general gas detection
- BS EN 14624:2020 Tracked Changes. Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- BS EN 45544-4:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Guide for selection, installation, use and maintenance
- BS EN 50244:2016 Tracked Changes. Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
- BS EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - General requirements and test methods
- BS EN 45544-4:2016 Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Guide for selection, installation, use and maintenance
- BS ISO 13914:2013 Soil quality. Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high-resolution mass selective detection (GC/HRMS)
National Metrological Verification Regulations of the People's Republic of China, How to choose a gas detector
CENELEC - European Committee for Electrotechnical Standardization, How to choose a gas detector
- EN 50073:1999 Guide for Selection@ Installation@ Use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases or Oxygen
- EN 60079-29-2:2007 Explosive atmospheres - Part 29-2: Gas detectors - Selection@ installation@ use and maintenance of detectors for flammable gases and oxygen (Incorporating Corrigendum December 2007)
- EN 50241-1:1999 Specification for Open Path Apparatus for the Detection of Combustible or Toxic Gases and Vapours@ Part 1: General Requirements and Test Methods
ZA-SANS, How to choose a gas detector
- SANS 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
Danish Standards Foundation, How to choose a gas detector
- DS/EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
- DS/EN 50244:2000 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
- DS/EN 50291-1:2021 Gas detectors – Electrical apparatus for the detection of carbon monoxide in domestic premises – Part 1: Test methods and performance requirements
- DS/EN 45544-4:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
Lithuanian Standards Office , How to choose a gas detector
- LST EN 13625-2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
- LST EN 50244-2002 Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
- LST EN 45544-4-2001 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
KR-KS, How to choose a gas detector
National Metrological Technical Specifications of the People's Republic of China, How to choose a gas detector
- JJF 1764-2019 Program of Pattern Evaluation of Hydrogen Sulfide Gas Detectors for Mining
Group Standards of the People's Republic of China, How to choose a gas detector
European Committee for Electrotechnical Standardization（CENELEC）, How to choose a gas detector
- EN 50244:2016 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection@ installation@ use and maintenance
- EN 45544-4:2016 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection@ installation@ use and maintenance
NZ-SNZ, How to choose a gas detector
- AS/NZS 60079.29.2:2008 Explosive atmospheres Part 29.2: Gas detectors-Selection, installation, use and maintenance of detectors for flammable gases and oxygen
Standard Association of Australia （SAA）, How to choose a gas detector
- AS/NZS 61779.6:2000 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection,installation,use and maintenance of apparatus for the detection and measurement of flammable gases
International Electrotechnical Commission (IEC), How to choose a gas detector
- IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
Korean Agency for Technology and Standards (KATS), How to choose a gas detector
- KS C IEC 61779-6-2003(2018)
- KS C IEC 61779-6:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 6：Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to choose a gas detector
- GB 12358-2006 Gas monitors and alarms for workplace.General technical requirements
ES-UNE, How to choose a gas detector
- UNE-EN 14624:2021 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- UNE-EN 50244:2018 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
- UNE-EN 45544-4:2016 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance (Endorsed by AENOR in June of 2016.)
AENOR, How to choose a gas detector
- UNE-EN 50244:2001 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance.
- UNE-EN 45544-4:2001 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours -- Part 4: Guide for selection, installation, use and maintenance.
American Society for Testing and Materials (ASTM), How to choose a gas detector
- ASTM E498-95(2000) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM E498/E498M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM E498/E498M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM E1603/E1603M-11(2017) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E1603-99 Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E1603-99(2006) Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E1603/E1603M-11 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E1603/E1603M-11(2022) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E498-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM D5623-94(2004)e1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
- ASTM D5623-94(2009) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
- ASTM G186-05(2016) Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
CZ-CSN, How to choose a gas detector
- CSN 75 7554-1998 Water quality - Determination of selected polynuclear aromatic hydrocarbons (PAH) - HPLC (FLD) and GC (MSD) methods
Professional Standard - Electricity, How to choose a gas detector
- DL/T 846.6-2004 General technical specifications for high voltage test equipments Part 6: SF_6 gas leak detector
- DL/T 846.6-2018 General Specifications for High Voltage Test Equipment Part 6: Sulfur Hexafluoride Gas Leak Detector
BE-NBN, How to choose a gas detector
- NBN-EN 50057-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit
- NBN-EN 50055-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (v/v) methane in air
- NBN-EN 50056-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100 % (v/v) methane in air
International Organization for Standardization (ISO), How to choose a gas detector
- ISO 13914:2023 Soil, treated biowaste and sludge — Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)
- ISO 13914:2013 Soil quality.Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high-resolution mass selective detection (GC/HRMS)