ZH
RU
ES

verification mark

verification mark, Total:210 items.

In the international standard classification, verification mark involves: Thermodynamics and temperature measurements, Character sets and information coding, Packaging and distribution of goods in general, Electricity. Magnetism. Electrical and magnetic measurements, Integrated circuits. Microelectronics, Pharmaceutics, Valves, Non-destructive testing, Mechanical testing, Construction materials, Metrology and measurement in general, Equipment for the chemical industry, Elements of buildings, Domestic safety, Radiocommunications, Protection against crime, Environmental protection, Analytical chemistry, Measurement of volume, mass, density, viscosity, Products of the chemical industry, General methods of tests and analysis for food products, Railway rolling stock, Aerospace electric equipment and systems, Sports equipment and facilities, Acoustics and acoustic measurements, On-board equipment and instruments, Software development and system documentation, Aerospace fluid systems and components, Measurement of force, weight and pressure, Test conditions and procedures in general, Measurement of fluid flow, Raw materials for rubber and plastics, Laboratory medicine, Company organization and management, Fasteners, Vocabularies, Pumps.

US-GSFC, verification mark

GSFC-STD-7000 REV A-2013 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS)

American Society for Testing and Materials (ASTM), verification mark

ASTM E2846-20 Standard Guide for Thermocouple Verification
ASTM F1851-98(2003) Standard Practice for Bar Code Verification
ASTM F1851-98 Standard Practice for Bar Code Verification
ASTM F1851-98(2009) Standard Practice for Bar Code Verification
ASTM F3263-17 Standard Guide for Packaging Test Method Validation
ASTM E2898-20 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM E2428-15a Standard Practice for Calibration and Verification of Torque Transducers
ASTM E2898-20a Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM E2593-17 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
ASTM E2593-07 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
ASTM E2593-17(2023) Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
ASTM E2617-08 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM E2617-08a Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM E2617-08ae1 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM E2617-09 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM E2617-09a Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM E2617-17 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM E2629-11 Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems
ASTM E2132-17 Standard Practice for Inventory Verification: Electronic and Physical Inventory of Assets
ASTM E2898-13 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM E2593-11 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
ASTM E3004-22 Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor
ASTM E3004-15e1 Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor
ASTM E3106-22 Standard Guide for Science-Based and Risk-Based Cleaning Process Development and Validation
ASTM E77-98(2003) Standard Test Method for Inspection and Verification of Thermometers
ASTM E77-98 Standard Test Method for Inspection and Verification of Thermometers
ASTM E77-14 Standard Test Method for Inspection and Verification of Thermometers
ASTM G106-89(2010) Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
ASTM E2975-16 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
ASTM E2975-16e1 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
ASTM E3106-17 Standard Guide for Science-Based and Risk-Based Cleaning Process Development and Validation
ASTM E3106-18 Standard Guide for Science-Based and Risk-Based Cleaning Process Development and Validation
ASTM E3106-18e1 Standard Guide for Science-Based and Risk-Based Cleaning Process Development and Validation
ASTM D4787-13(2018) Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
ASTM E4-79 Standard Methods of Load Verification Of Testing Machines
ASTM E3291-21 Standard Guide for Reliability Demonstration Testing
ASTM E2918-18 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-18a Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-13 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-23 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E4-02 Standard Practices for Force Verification of Testing Machines
ASTM E4-20 Standard Practices for Force Verification of Testing Machines
ASTM E4-21 Standard Practices for Force Verification of Testing Machines
ASTM E4-10 Standard Practices for Force Verification of Testing Machines
ASTM F1062-97 Standard Test Method for Verification of Ski Binding Test Devices
ASTM E3004-20 Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor
ASTM E3004-20a Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor
ASTM E2500-20 Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
ASTM E3116-18 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM E4-16 Standard Practices for Force Verification of Testing Machines
ASTM E1458-92 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM E1762-95 Standard Guide for Electronic Authentication of Health Care Information
ASTM E2374-15 Standard Guide for Acoustic Emission System Performance Verification
ASTM E2374-16 Standard Guide for Acoustic Emission System Performance Verification
ASTM E2374-16(2021) Standard Guide for Acoustic Emission System Performance Verification
ASTM F3153-22 Standard Specification for Verification of Aircraft Systems and Equipment
ASTM F1062-97(2013) Standard Test Method for Verification of Ski Binding Test Devices
ASTM E126-13 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E77-14e1 Standard Test Method for Inspection and Verification of Thermometers
ASTM E77-14(2021) Standard Test Method for Inspection and Verification of Thermometers
ASTM E2374-04 Standard Guide for Acoustic Emission System Performance Verification
ASTM F3109-23 Red Standard Practice for Verification of Multi-Axis Force Measuring Platforms (Standard + Redline PDF Bundle)
ASTM F310-70(2000) Standard Practice for Sampling Cryogenic Aerospace Fluids
ASTM F3109-16 Standard Test Method for Verification of Multi-Axis Force Measuring Platforms
ASTM F3109-23 Standard Practice for Verification of Multi-Axis Force Measuring Platforms
ASTM F3109-22 Standard Practice for Verification of Multi-Axis Force Measuring Platforms
ASTM E2658-11 Standard Practices for Verification of Speed for Material Testing Machines
ASTM E2658-15 Standard Practices for Verification of Speed for Material Testing Machines
ASTM E2658-15(2023) Standard Practices for Verification of Speed for Material Testing Machines
ASTM F2717-14(2019) Standard Guide for Development of an Independent Third-Party Verification of Reference Materials
ASTM D7740-20 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
ASTM E74-18 Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM E2904-17 Standard Practice for Characterization and Verification of Phased Array Probes
ASTM E74-18e1 Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM E2847-13e1 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM E2847-14 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM E2253-16 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2428-22 Standard Practice for Calibration and Verification of Elastic Torque Measurement Standards
ASTM E2428-15 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
ASTM E2428-14 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2975-23 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2253-11 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM D3764-01 Standard Practice for Validation of Process Stream Analyzer Systems
ASTM E2904-12 Standard Practice for Characterization and Verification of Phased Array Probes
ASTM E915-19 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM D4821-15 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM E2629-19 Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems
ASTM E2549-09 Standard Practice for Validation of Seized-Drug Analytical Methods
ASTM E2629-20 Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems
ASTM D3764-23 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM E3116-23 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM F1940-07a(2014) Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E1012-99 Standard Practice for Verification of Specimen Alignment Under Tensile Loading
ASTM E2161-22 Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM E2161-22a Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM E2161-21 Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM E2161-21a Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM E2161-21b Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM E2161-15(2019) Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM E2161-22b Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM E2593-07e1 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
ASTM E2593-11e1 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
ASTM D5337-23 Standard Practice for Setting and Verifying the Flow Rate of Personal Sampling Pumps
ASTM E2593-12 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
ASTM D3764-22 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM E2402-11(2017) Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-19 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E126-19 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E2161-15 Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology

Institute of Electrical and Electronics Engineers (IEEE), verification mark

IEEE P1012/D18, January 2016 IEEE Approved Draft Standard for System, Software and Hardware Verification and Validation
IEEE Std 1801-2009 IEEE Standard for Design and Verification of Low Power Integrated Circuits
IEEE Std P1801/D14, January 23, 2013 IEEE Standard for Design and Verification of Low-Power Integrated Circuits
IEEE Std 1801-2013 IEEE Standard for Design and Verification of Low-Power Integrated Circuits - Redline
IEEE Std 1801-2015 IEEE Standard for Design and Verification of Low-Power, Energy-Aware Electronic Systems
IEEE Std 1801-2018 IEEE Standard for Design and Verification of Low-Power, Energy-Aware Electronic Systems
IEEE Std P1801/D13, January 2013 IEEE Draft Standard for Design and Verification of Low Power Integrated Circuits
IEEE Std 1597.1-2008 IEEE Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations
IEEE Std 1597.1-2022 IEEE Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations
IEEE P1801/D10, August 2017 IEEE Draft Standard for Design and Verification of Low Power, Energy Aware Electronic Systems
IEEE P1801/D7, August 2015 IEEE Draft Standard for Design and Verification of Low Power, Energy Aware Electronic Systems
IEEE P1801/D8, September 2015 IEEE Draft Standard for Design and Verification of Low Power, Energy Aware Electronic Systems
IEEE P1801/D11, July 2018 IEEE Draft Standard for Design and Verification of Low Power, Energy Aware Electronic Systems
IEEE P1801/D9, October 2015 IEEE Draft Standard for Design and Verification of Low Power, Energy Aware Electronic Systems
IEEE Std 1801a-2014 IEEE Standard for Design and Verification of Low-Power Integrated Circuits--Amendment 1
IEEE P1801a/D03, May 2014 IEEE Standard for Design and Verification of Low-Power Integrated Circuits--Amendment 1
IEEE Unapproved Draft Std P1597.1/D4.3, Jun 2008 IEEE Draft Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations
IEEE P1547.1/D6, October 2021 IEEE Draft Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations
IEEE P1597.1/D7, October 2021 IEEE Draft Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations
IEEE P1801a/D01, May 2014 IEEE Draft Standard for Design and Verification of Low-Power Integrated Circuit -- Amendment 1
IEEE P1801/D12, July 2018 IEEE Approved Draft Standard for Design and Verification of Low Power, Energy Aware Electronic Systems
IEEE P1597.1/D8, October 2021 IEEE Approved Draft Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations
IEEE P1597.1 IEEE Approved Draft Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations
P1597.1/D8, October 2021 IEEE Approved Draft Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations
IEEE Std 1647-2011 IEEE Standard for the Functional Verification Language e
IEEE 1647-2019 IEEE Standard for the Functional Verification Language e
IEEE 1647-2016 IEEE Standard for the Functional Verification Language e
IEEE STD 1647-2008 IEEE Standard for the Functional Verification Language e
IEEE Std 1647-2019 IEEE Standard for the Functional Verification Language e
IEEE Std 1647-2016 IEEE Standard for the Functional Verification Language e - Redline
IEEE P1647/D9, February 2011 IEEE Draft Standard for the Functional Verification Language e
IEEE P1647/D2, March 2016 IEEE Draft Standard for the Functional Verification Language e
IEEE P1647/D3, April 2019 IEEE Approved Standard for the Functional Verification Language e
IEEE Std 1012-1998 IEEE Standard for Software Verification and Validation
IEEE Std 1012-2004 IEEE Standard for Software Verification and Validation

AASHTO - American Association of State Highway and Transportation Officials, verification mark

T 67-2008 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
T 67-2005 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
T 67-1985 Standard Method of Test for Standard Practices for Load Verification of Testing Machines
T 67-2004 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (ASTM Designation: E 4-02)
T 67-2003 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (ASTM Designation: E 4-01)
T 67-2000 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (Twentieth Edition; ASTM E4-98a)
T 67-1996 Standard Specification for Standard Practices for Force Verification of Testing Machines (Eighteenth Edition; ASTM E4-94)
T 67-1997 Standard Specification for Standard Practices for Force Verification of Testing Machines (Nineteenth Edition; ASTM E4-96)

American National Standards Institute （ANSI), verification mark

ANSI/ESD SP14.1-20041-2004 System Level Electrostatic Discharge (ESD) Simulator Verification Standard
ANSI/ESD SP14.1-2004 System Level Electrostatic Discharge (ESD) Simulator Verification Standard
ANSI/IEEE 1801:2009 Standard for Design and Verification of Low Power Integrated Circuits
ANSI/FCI 79-1-2009 Standard for Proof of Pressure Ratings for Pressure Regulators
ANSI/IEEE 1483:2000 Standard for the Verification of Vital Functions in Processor-Based Systems Used in Rail Transit Control
ANSI/IEEE 1012:2004 Standard for Software Verification and Validation

ZA-SANS, verification mark

SANS 6150:2006 Verification of compression testing machines for concrete: Calibration of load scale

Association Francaise de Normalisation, verification mark

NF ISO 10099:2001 Transmissions pneumatiques - Vérins - Critères de réception et de vérification finale
CWA 14911:2004 Cyber Identity : Specification of a Top Level Service (TLS) for verifying identifiers
NF L40-211*NF ISO 3323:1989 Aircraft. Hydraulic componenets. Marking to indicate fluid for which components is approved.
NF ISO 12787:2012 Cosmétiques - Méthodes analytiques - Critères de validation pour les résultats analytiques utilisant des techniques chromatographiques
NF ISO 13495:2014 Produits alimentaires - Principes de sélection et critères de validation des méthodes d'identification variétale par analyses d'acides nucléiques spécifiques
NF V03-045*NF ISO 13495:2014 Foodstuffs - Principles of selection and criteria of validation for the varietal identification methods using specific nucleic acid

ESD - ESD ASSOCIATION, verification mark

SP14.1-2004 System Level Electrostatic Discharge (ESD) Simulator Verification Standard Practice

IT-UNI, verification mark

EC 1-2021 UNI 11673-4-2021 Installation of doors and windows - Part 4: Requirements and verification criteria of installation
UNI 11673-4-2021 Installation of doors and windows - Part 4: Requirements and verification criteria of installation

Group Standards of the People's Republic of China, verification mark

T/YQDEIF 003-2022 Testing and verification standard for cloud-side interaction protocol of electric power Internet of things
T/HNCAA 027-2021 Verification of inspection and testing standard methods

GB-REG, verification mark

REG GSFC-STD-7000-2005 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS) For GSFC Flight Programs and Projects
REG NASA-STD-5018-2011 STRENGTH DESIGN AND VERIFICATION CRITERIA FOR GLASS, CERAMICS, AND WINDOWS IN HUMAN SPACE FLIGHT APPLICATIONS

ES-UNE, verification mark

IEEE 1597.1-2022 IEEE Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations
UNE 224001:2023 Solar thermal electric plants. Criteria for design, installation and performance verification of flexible pipe connectors in parabolic trough collector technology.

Danish Standards Foundation, verification mark

DS/ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques

Korean Agency for Technology and Standards (KATS), verification mark

KS M ISO 12787:2014 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS M ISO 12787-2014(2019) Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques

British Standards Institution (BSI), verification mark

BS EN ISO 20813:2022 Foodstuffs. Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid
BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques

The American Road & Transportation Builders Association, verification mark

AASHTO T67-2000 Standard Method of Test for Standard Practices for Force Verification of Testing Machine Twentieth Edition; ASTM E4-98a
AASHTO PP6-1994 Standard Practice for Grading or Verifying the Performance Grade of an Asphalt Binder 2000 Edition; Interim Edition 4/2001 R(1996)

Society of Automotive Engineers (SAE), verification mark

SAE AS6462A-2014 AS5553A, Fraudulent/Counterfeit Electronic Parts; Avoidance, Detection, Mitigation, and Disposition Verification Criteria
SAE AS6462C-2019 AS5553C, Counterfeit Electrical, Electronic, and Electromechanical (EEE) Parts; Avoidance, Detection, Mitigation, and Disposition Verification Criteria
SAE AS6301-2014 Compliance Verification Criterion Standard for SAE AS6081, Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition - Distributors

未注明发布机构, verification mark

SAE AS6462C-201911 AS5553A, Fraudulent/Counterfeit Electronic Parts; Avoidance, Detection, Mitigation, and Disposition Verification Criteria

SAE - SAE International, verification mark

SAE AS6462B-2019 AS5553A, Fraudulent/Counterfeit Electronic Parts; Avoidance, Detection, Mitigation, and Disposition Verification Criteria

IETF - Internet Engineering Task Force, verification mark

RFC 4359-2006 The Use of RSA/SHA-1 Signatures within Encapsulating Security Payload (ESP) and Authentication Header (AH)
RFC 6054-2010 Using Counter Modes with Encapsulating Security Payload (ESP) and Authentication Header (AH) to Protect Group Traffic

European Telecommunications Standards Institute (ETSI), verification mark

ETSI TR 119 100-2016 Electronic Signatures and Infrastructures (ESI); Guidance on the use of standards for signature creation and validation (V1.1.1)

ETSI - European Telecommunications Standards Institute, verification mark

TR 119 100-2016 Electronic Signatures and Infrastructures (ESI); Guidance on the use of standards for signature creation and validation (V1.1.1)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., verification mark

IEEE P1801/D12-2018 Draft Standard for Design and Verification of Low-Power@ Energy-Aware Electronic Systems (IEEE Computer Society)
IEEE P1801/D10-2017 Draft Standard for IEEE Standard for Design and Verification of Low-Power@ Energy-Aware Electronic Systems (IEEE Computer Society)
IEEE P1647/D3-2019 Draft Standard for the Functional Verification Language e

RU-GOST R, verification mark

GOST ISO 12787-2016 Perfumery and cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
GOST R 51879-2002 Fire-arms. Procedure of approval of proof marks of countries-members of International Permanent Commitee on testing small-arms
GOST R 57882-2017 The system of protection against fraud and counterfeiting. The verification criteria for conformity assessment of the methods and practice of organizations for the protection against fraud and counterfeiting requirements

AWS - American Welding Society, verification mark

QC1-2007 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS
QC1-2006 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS

US-CFR-file, verification mark

CFR 7-75.41-2014 Agriculture. Part75:Regulations for inspection and certification of quality of agricultural and vegetable seeds. Section75.41:General.
CFR 7-75.43-2014 Agriculture. Part75:Regulations for inspection and certification of quality of agricultural and vegetable seeds. Section75.43:Laboratory testing.
CFR 7-75.42-2014 Agriculture. Part75:Regulations for inspection and certification of quality of agricultural and vegetable seeds. Section75.42:Sampling and sealing.

Alliance of Telecommunications Industry Solutions （ATIS), verification mark

ATIS T1.TR.22-1993 Privacy and Authentication Objectives for Wireless Access to Personal Communications

ATIS - Alliance for Telecommunications Industry Solutions, verification mark

T1.TR.22-1993 Privacy and Authentication Objectives for Wireless Access to Personal Communications

American Welding Society (AWS), verification mark

AWS QC1 PORTUGUESE-2007
AWS QC1-1996 Standard for AWS Certification of Welding Inspectors