ZH
RU
ES

watch glass specifications

watch glass specifications, Total:297 items.

In the international standard classification, watch glass specifications involves: Education, Ceramics, Kitchen equipment, Testing of metals, Analytical chemistry, Sports equipment and facilities, Linear and angular measurements, Machine tools, Surface treatment and coating, Road engineering, Integrated circuits. Microelectronics, Capacitors, Wood, sawlogs and sawn timber, Components for electrical equipment, Products of the chemical industry, Construction materials, Rubber and plastics products, Protection of and in buildings, Installations in buildings, Measurement of time, velocity, acceleration, angular velocity, Road vehicle systems, Applications of information technology, Power transmission and distribution networks, Pharmaceutics, Glass, Elements of buildings, Protection against fire, Metrology and measurement in general, Furniture, Cereals, pulses and derived products, Wood-based panels, Measurement of fluid flow, Piezoelectric and dielectric devices, Fasteners, Microbiology, Machine tool systems, Sugar. Sugar products. Starch, Products of non-ferrous metals, Resistors, Measurement of volume, mass, density, viscosity, Cans. Tins. Tubes, Technical drawings, Solar energy engineering, Equipment for entertainment.


German Institute for Standardization, watch glass specifications

  • DIN 12341:1970 Watch glasses
  • DIN EN 166100:1999-03 Sectional specification: Surface acoustic wave (SAW) filters; German version EN 166100:1998
  • DIN 55141:1982 Machine tools; Vertical surface broaching machines; Sizes
  • DIN 55142:1982 Machine tools; Horizontal surface broaching machines; Sizes
  • DIN EN ISO 25178-3:2012-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012); German version EN ISO 25178-3:2012
  • DIN EN ISO 5436-1:2000-11 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000); German version EN ISO 5436-1:2000
  • DIN EN ISO 5436-2:2013-04 Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012); German version EN ISO 5436-2:2012
  • DIN EN ISO 21920-3:2022-12 Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021); German version EN ISO 21920-3:2022
  • DIN ISO 13473-3:2004-07 Characterization of pavement texture by use of surface profiles - Part 3: Specifications and classification of profilometers (ISO 13473-3:2002)
  • DIN EN ISO 25178-70:2014-06 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014); German version EN ISO 25178-70:2014
  • DIN EN ISO 25178-72:2021-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017 + Amd 1:2020); German version EN ISO 25178-72:2017 + A1:2020
  • DIN EN ISO 21920-1:2022 Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
  • DIN EN ISO 21920-3:2022 Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021)
  • DIN 55145:1982 Machine tools; Continuously working horizontal surface, broaching machines (chain broaching machines); Sizes
  • DIN EN ISO 12085 Berichtigung 1:2009-09 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997, Corrigendum to DIN EN ISO 12085:1998-05; German version EN ISO 12085:1997/AC:2008
  • DIN EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016); German version EN ISO 25178-1:2016
  • DIN EN ISO 25178-73:2019-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019); German version EN ISO 25178-73:2019
  • DIN 267-2:2017 Fasteners - Technical specification, surface roughness for product classes A and B
  • DIN 10113-1:1997 Determination of surface colony count on fitment and utensils in foodareas - Part 1: Quantitative swab method
  • DIN EN 1388-2:1995-11 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware; German version EN 1388-2:1995
  • DIN 10113-2:1997 Determination of surface colony count on fitment and utensils in foodareas - Part 2: Semiquantitative swab method
  • DIN EN ISO 25178-600:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019); German version EN ISO 25178-600:2019
  • DIN EN 140402:2017-07 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors; German version EN 140402:2015 + A1:2016 / Note: DIN EN 140402 (2015-12) remains valid alongside this standard until 2019-09-19.
  • DIN EN 140401:2009-12 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors; German version EN 140401:2009 / Note: DIN EN 140401 (2002-12) remains valid alongside this standard until 2012-03-01.
  • DIN EN ISO 12085:1998-05 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997

RO-ASRO, watch glass specifications

IN-BIS, watch glass specifications

Professional Standard - Education, watch glass specifications

Association Francaise de Normalisation, watch glass specifications

  • NF EN 12271:2007 Enduits superficiels - Spécifications
  • NF EN ISO 25178-3:2012 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 3 : opérateurs de spécification
  • NF EN ISO 25178-72:2017 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 72 : format de fichier XML x3p
  • NF H35-007*NF EN 29885:1994 Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods.
  • NF EN 130800/A1:2006 Spécification intermédiaire : condensateurs au tantale pour montage en surface
  • NF C93-129-100:2014 Sectional specification : wirewound surface mounting inductors
  • NF EN ISO 21920-1:2022 Spécification géométrique des produits (GPS) - État de surface : méthode du profil - Partie 1 : indication des états de surface
  • NF EN ISO 21920-3:2022 Spécification géométrique des produits (GPS) - Etat de surface : méthode du profil - Partie 3 : opérateurs de spécification
  • NF S86-300:1996 Horlogerie - Cahier des charges pour cadrans de montres
  • NF EN ISO 25178-72/A1:2020 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 72 : format de fichier XML x3p - Amendement 1
  • NF EN ISO 25178-70:2014 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 70 : mesures matérialisées
  • NF EN ISO 19712-1:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 1 : classification et spécifications
  • NF C93-666-101*NF EN 166101:2014 Blank Detail Specification : Surface Acoustic Wave (SAW) filters - Capability approval
  • NF EN ISO 8785:1999 Spécification géométrique des produits (GPS) - Imperfections de surface - Termes, définitions et paramètres
  • NF B56-029:1980 Panneaux fibragglo - Spécifications
  • NF EN IEC 63356-1:2022 Caractéristiques de source lumineuse à LED - Partie 1 : Feuilles de caractéristiques
  • NF ISO 2456:1987 Agents de surface - Eau employée comme solvant pour les essais - Spécifications et méthodes d'essais.
  • NF EN 15330-1:2013 Sols sportifs - Surfaces en gazon synthétique et surfaces en textile aiguilleté principalement destinées à l'usage en extérieur - Partie 1 : spécifications relatives aux surfaces en gazon synthétique destinées à la pratique du football, du ho...
  • NF B30-108-1:1989 Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Part 1 : determination by titration method and classification.

YU-JUS, watch glass specifications

  • JUS B.E4.216-1987 Laboratoryglassware and accessories. I/Vatch glasses. Quality requirements

未注明发布机构, watch glass specifications

  • BS 1797:1987(1999) Schedule for Tables for use in the calibration of volumetric glassware
  • BS ISO 14975:2000(2012) Surface chemical analysis — Information formats
  • GJB 8896-2017 Earth surface spatial grid and coding
  • BS EN 1388-2:1996(2004) Materials and articles in contact with foodstuffs — Silicate surfaces — Part 2 : Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
  • ISO 14976:1998/Cor 1:1999 Surface Chemical Analysis Data Transfer Format Technical Corrigendum 1
  • BSI Flex 5555:2021 Community face coverings — Specification
  • VDI VDE 2602 Blatt 3-2012 Surface testing Specification of surface conditions in technical product documentation Surface measurement Specification of surface conditions in technical product documentation
  • VDI VDE 2602 Blatt 3-2018 Surface testing, specification of surface conditions in technical product documentation, Surface measurement, Specification of surface conditions in technical product documentation

RU-GOST R, watch glass specifications

Professional Standard - Commodity Inspection, watch glass specifications

  • SN/T 1877.5-2009 Determination of polycyclic aromatic hydrocarbons in metalware surface

国家质量监督检验检疫总局, watch glass specifications

  • SN/T 1877.5-2017 Determination of polycyclic aromatic hydrocarbons on the surface of metal utensils

GOSTR, watch glass specifications

American Society for Testing and Materials (ASTM), watch glass specifications

  • ASTM E786-81(2011) Standard Specification for Dishes, Evaporating, Platinum
  • ASTM B449-93(2015) Standard Specification for Chromates on Aluminum
  • ASTM B532-85(2014) Standard Specification for Appearance of Electroplated Plastic Surfaces
  • ASTM E1792-96a Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
  • ASTM E1792-20 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
  • ASTM B633-15 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
  • ASTM B699-86(2015) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
  • ASTM B979-12 Standard Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors
  • ASTM E708-79(2011) Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
  • ASTM E2568-07 Standard Specification for PB Exterior Insulation and Finish Systems
  • ASTM E2568-17 Standard Specification for PB Exterior Insulation and Finish Systems
  • ASTM E2568-17a Standard Specification for PB Exterior Insulation and Finish Systems
  • ASTM B695-04(2016) Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
  • ASTM C1670/C1670M-13a Standard Specification for Adhered Manufactured Stone Masonry Veneer (AMSMV) Units
  • ASTM D3909/D3909M-97b(2012)e1 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
  • ASTM D3909/D3909M-14 Standard Specification for Asphalt Roll Roofing 40;Glass Felt41; Surfaced With Mineral Granules
  • ASTM D390-92(1999) Standard specifications for asphalt roofing membranes (glass felt) with mineral powder on the surface
  • ASTM B633-11 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
  • ASTM E1792-03(2016) Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
  • ASTM B633-13 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
  • ASTM B604-91(2015) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
  • ASTM D1139/D1139M-15 Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
  • ASTM C887-13 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
  • ASTM F1919-14(2019) Standard Specification for Griddles, Single-Sided and Double-Sided, Gas and Electric
  • ASTM E2685-15 Standard Specification for Steel Blades Used with the Photovoltaic Module Surface Cut Test
  • ASTM F2479-17 Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
  • ASTM F2645-16 Standard Specification for Bun Slicing Machines

ES-UNE, watch glass specifications

  • UNE-EN 130800:2000 Sectional Specification: Tantalum surface mounting capacitors (Endorsed by AENOR in December of 2000.)
  • UNE-EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
  • UNE-EN ISO 5436-2:2012 Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) (Endorsed by AENOR in October of 2013.)
  • UNE-EN 130801:2002 Blank Detail Specification: Tantalum surface mounting capacitors (Endorsed by AENOR in May of 2002.)
  • UNE-EN ISO 21920-3:2023 Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021)
  • UNE-EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
  • UNE-EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) (Endorsed by AENOR in January of 2015.)
  • UNE-EN ISO 25178-72:2020 Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
  • UNE-EN ISO 21920-1:2023 Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
  • UNE-EN ISO 18134-1:2023 Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
  • UNE-EN ISO 25178-71:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
  • UNE-EN 166101:1999 BLANK DETAIL SPECIFICATION: SURFACE ACOUSTIC WAVE (SAW) FILTERS. CAPABILITY APPROVAL (Endorsed by AENOR in June of 1999.)
  • UNE-EN 1388-2:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
  • UNE 147302:2021 Sports surfaces of natural and hybrid Grass. Construction systems, specifications, test methods and inspections for football sports surfaces.
  • UNE-EN ISO 25178-72:2020/A1:2021 Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020)
  • UNE-EN ISO 25178-600:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
  • ISO/PRF 4802-1:2023 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
  • UNE-EN 140402:2015/A1:2016 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors (Endorsed by Asociación Española de Normalización in January of 2017.)
  • UNE-EN 140402:2015 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors (Endorsed by AENOR in May of 2015.)

British Standards Institution (BSI), watch glass specifications

  • BS 7044-4:1991 Artificial sports surfaces - Specification for surfaces for multi-sports use
  • BS EN ISO 25178-1:2016 Geometrical product specifications (GPS). Surface texture: Areal. Indication of surface texture
  • BS 8870:2022+A1:2023 Materials for roads. High friction surfacing. Specification
  • 14/30295898 DC BS EN 14904. Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
  • 20/30396725 DC BS 8870. Materials for roads. High friction surfacing. Specification
  • BS EN ISO 25178-72:2017+A1:2020 Geometrical product specifications (GPS). Surface texture: Areal - XML file format x3p
  • BS EN ISO 10545-2:1997 Ceramic tiles. Determination of dimensions and surface quality
  • BS EN ISO 21920-2:2022 Geometrical product specifications (GPS). Surface texture: Profile - Terms, definitions and surface texture parameters
  • BS EN ISO 21920-1:2022 Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile. Indication of surface texture
  • BS EN ISO 25178-2:2022 Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal. Terms, definitions and surface texture parameters
  • BS EN ISO 25178-73:2019 Geometrical product specifications (GPS). Surface texture: Areal - Terms and definitions for surface defects on material measures
  • BS ISO 6123-2:2015 Rubber or plastics covered rollers. Specifications. Surface characteristics
  • 22/30462336 DC BS 8870:2022+A1. Materials for roads. High friction surfacing. Specification
  • BS ISO 19712-1:2009 Plastics. Decorative solid surfacing materials. Classification and specifications
  • 15/30329856 DC BS EN 14904. Indoor surfaces for multi-sports use. Specification
  • BS ISO 14975:2000 Surface chemical analysis - Information formats
  • BS ISO 14975:2001 Surface chemical analysis. Information formats
  • BS ISO 4802-1:2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Determination by titration method and classification
  • 22/30396867 DC BS 750. Underground fire hydrants. Surface box frames and covers. Specification
  • 19/30396046 DC BS EN ISO 25178-72 AMD1. Geometrical product specifications (GPS). Surface texture. Areal. Part 72. XML file format x3p
  • 19/30397789 DC BS EN ISO 25178-2. Geometrical product specifications (GPS). Surface texture: Areal. Part 2. Terms, definitions and surface texture parameters
  • 20/30398209 DC BS EN ISO 21920-1. Geometrical product specifications (GPS). Surface texture: Profile. Part 1. Indication of surface texture
  • BS EN ISO 25178-600:2019 Geometrical product specifications (GPS). Surface texture: Areal - Metrological characteristics for areal topography measuring methods
  • BS EN ISO 25178-71:2017 Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal. Software measurement standards
  • 13/30272930 DC BS EN ISO 4287 AMD2. Geometrical Product Specifications (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
  • BS ISO 4802-2:2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Determination by flame spectrometry and classification
  • BS ISO 4802-2:2016 Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Determination by flame spectrometry and classification
  • BS ISO 14976:1998 Surface chemical analysis - Data transfer format
  • BS EN 62276:2013 Single crystal wafers for surface acoustic wave (SAW) device applications. Specifications and measuring methods
  • BS EN 62276:2006 Single crystal wafers applied for surface acoustic wave (SAW) device applications - Specification and measuring methods
  • BS EN 62276:2016 Single crystal wafers for surface acoustic wave (SAW) device applications. Specifications and measuring methods
  • BS EN ISO 21920-3:2022 Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile. Specification operators
  • BS ISO 28340:2013 Combined coatings on aluminium. General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
  • BS ISO 3937-3:2009 Cutter arbors with tenon drive. Dimensions of hollow taper interface with flange contact surface
  • BS ISO 3937-3:2008 Cutter arbors with tenon drive - Dimensions of hollow taper interface with flange contact surface
  • BS EN ISO 25178-700:2023 Geometrical product specifications (GPS). Surface texture: Areal - Calibration, adjustment and verification of areal topography measuring instruments
  • BS EN 60393-6:2016 Potentiometers for use in electronic equipment. Sectional specification. Surface mount preset potentiometers
  • BS 8567:2012 Specification for outdoor electricity meter cupboards
  • 20/30398212 DC BS EN ISO 21920-2. Geometrical product specifications (GPS). Surface texture: Profile. Part 2. Terms, definitions and surface texture parameters
  • BS ISO 4802-1:2016 Tracked Changes. Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Determination by titration method and classification
  • BS 1262:2002 Metal packaging. Round lever-lid metal containers for surface coatings. Specification
  • BS EN 140402:2015+A1:2016 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors

CZ-CSN, watch glass specifications

Electronic Components, Assemblies and Materials Association, watch glass specifications

Korean Agency for Technology and Standards (KATS), watch glass specifications

  • KS B ISO 25178-3:2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 3: Specification operators
  • KS B ISO 25178-1:2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 1: Indication of surface texture
  • KS M ISO 4198:2003 Surface active agents-Detergents for hand dishwashing-Guide for comparative testing of performance
  • KS M ISO 4198:2014 Surface active agents — Detergents for hand dishwashing — Guide for comparative testing of performance
  • KS B ISO 4288-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture
  • KS B ISO 4287-2014(2019) Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
  • KS D ISO 14975:2011 Surface chemical analysis-Information formats
  • KS D ISO 14975-2011(2016) Surface chemical analysis－Information formats
  • KS D ISO 14975-2011(2021) Surface chemical analysis－Information formats
  • KS B ISO 25178-2:2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
  • KS M ISO 7535:2007 Surface active agents－Detergents for domestic machine dishwashing－Guide for comparative testing of performance
  • KS B ISO 8785-2014(2019) Geometrical Product Specification(GPS) — Surface imperfections — Terms, definitions and parameters
  • KS M ISO 6123-2:2018 Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics
  • KS D ISO 14976:2011 Surface chemical analysis－Data transfer format
  • KS D ISO 14976-2011(2016) Surface chemical analysis－Data transfer format
  • KS D ISO 14976-2011(2021) Surface chemical analysis－Data transfer format
  • KS B ISO 12085-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method — Motif parameters
  • KS B 6534-1991 Standard Form of Specification of Smooth Rollers
  • KS B 6102-1978(2011) Expression of the specification for dust collectors
  • KS B 6102-1981 Expression of the specification for dust collectors
  • KS M ISO 649-1:2001 Laboratory glassware－Density hydrometers for general purposes－Part 1：Specification
  • KS A ISO 1302:2016 Geometrical product specifications (GPS) — Indication of surface texture in technical product documentation

KR-KS, watch glass specifications

  • KS B ISO 25178-3-2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 3: Specification operators
  • KS B ISO 25178-1-2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 1: Indication of surface texture
  • KS B ISO 25178-2-2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
  • KS M ISO 6123-2-2018 Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics
  • KS A ISO 1302-2016 Geometrical product specifications (GPS) — Indication of surface texture in technical product documentation

PL-PKN, watch glass specifications

  • PN B13044-1989 Laboratory glassware Agitators Specification
  • PN B13003-1986 Laboratory glassware General specifications and methods of tests
  • PN B13043-1986 Laboratory glassware Test tubes Specification and methods of test
  • PN H97050-1970 Corro?ion pro?ec?ion Pictoriol surface prepara?ion standard* lor pain?ing ??eel
  • PRS PR 62-0-1964
  • PN M75015-1992 Sanitary tapware. General technical specifications for elektro deposited surface nickel chrome coatings

International Organization for Standardization (ISO), watch glass specifications

  • ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture
  • ISO 14975:2000 Surface chemical analysis - Information formats
  • ISO 14976:1998 Surface chemical analysis - Data transfer format
  • ISO 25178-72:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p
  • ISO/DIS 4802-1 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
  • ISO 28340:2013 Combined coatings on aluminium - General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium

HU-MSZT, watch glass specifications

American National Standards Institute （ANSI), watch glass specifications

Electronic Components, Assemblies and Materials Association, watch glass specifications

  • ECA IS-717-1997 Surface Mount Tantalum Capacitor Qualification Specification
  • EIA_ECA-958-2006 SURFACE MOUNT COMMON MODE CHOKE QUALIFICATION SPECIFICATION
  • ECA EIA-944-2002 Surface Mount Ferrite Chip Bead Qualification Specification
  • EIA/ECA-955-2007 SURFACE MOUNT ALUMINUM ELECTROLYTIC CHIP CAPACITOR WITH POLYMER CATHODE (QUALIFICATION SPECIFICATION)

Japanese Industrial Standards Committee (JISC), watch glass specifications

  • JIS B 0681-1:2023 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 1: Indication of surface texture
  • JIS K 0142:2000 Surface chemical analysis -- Information formats
  • JIS K 0141:2000 Surface chemical analysis -- Data transfer format

ECIA - Electronic Components Industry Association, watch glass specifications

  • IS-760-1998 Surface Mount Wirewound Inductor Qualification Specification
  • EIA/ECA-958-2006 SURFACE MOUNT COMMON MODE CHOKE QUALIFICATION SPECIFICATION
  • EIA-717-A-2010 SURFACE MOUNT NIOBIUM AND TANTALUM CAPACITOR QUALIFICATION SPECIFICATION
  • EIA-448-23-1990 Surface Mountable Switches@ Qualification Test

AENOR, watch glass specifications

  • UNE-EN ISO 4288:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS). SURFACE TEXTURE: PROFILE METHOD. RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE. (ISO 4288:1996).
  • UNE-EN ISO 12085:1998 GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. MOTIF PARAMETERS. (ISO 12085:1996).
  • UNE-EN ISO 4287:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS). SURFACE TEXTURE: PROFILE METHOD. TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS. (ISO 4287:1997+TECHNICAL CORRIGENDUM 1).
  • UNE 55521:1988 SURFACE ACTIVE AGENTS. WATER USED AS A SOLVENT FOR TESTS. SPECIFICATIONS AND TEST METHODS

Danish Standards Foundation, watch glass specifications

  • DS/EN ISO 12085/Corr. 1:2007 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters
  • DS/EN ISO 12085:1998 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters
  • DS/ISO 12085:1997 Geometrical Product Specification (GPS) - Surface texture: Profile method - Motif parameters
  • DS/EN ISO 13565-3:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material propability curve
  • DS/ISO 13565-1:1997 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions
  • DS/ISO 4802-1:2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 1: Determination by titration method and classification
  • DS/EN ISO 1302:2002 Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation

BE-NBN, watch glass specifications

  • NBN-EN 98-1992 Ceramic tiles - Determination of dimensions and surface quality
  • NBN T 63-305-1986 Surface active agents - Detergents for domestic machine dishwashing-Guide for comparative testing of performance

ES-AENOR, watch glass specifications

Indonesia Standards, watch glass specifications

SAE - SAE International, watch glass specifications

Society of Automotive Engineers (SAE), watch glass specifications

CU-NC, watch glass specifications

  • NC 53-157-1985 Construction Design Elaboration Agricultural Surface Drainage Design Specifications
  • NC 94-25-1986 Perfumery and Cosmetics Facial Powders. General Quality Specifications

CENELEC - European Committee for Electrotechnical Standardization, watch glass specifications

  • PREN 132600-1992 Sectional Specification: Surface Mounted Mica Capacitors Qualification Approval
  • PREN 132601-1992 Blank Detail Specification: Surface Mounted Mica Capacitors Qualification Approval

Standard Association of Australia （SAA）, watch glass specifications

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, watch glass specifications

Lithuanian Standards Office , watch glass specifications

  • LST EN ISO 12085:2001 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996)
  • LST EN ISO 12085:2001/AC:2008 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
  • LST EN ISO 13565-3:2001 Geometrical Product Specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998)

IPC - Association Connecting Electronics Industries, watch glass specifications

  • IPC A-24-G- Surface Insulation Resistance (Gerber Format Only)

Conference of European Post Telecommunication (CEPT), watch glass specifications

SSPC - The Society for Protective Coatings, watch glass specifications

  • SP COM-1995 Surface Preparation Specifications Surface Preparation Commentary
  • CHAPTER 2-1995 Surface Preparation Specifications

AT-ON, watch glass specifications

  • ONORM B 2535-1994 Meters for cold water - Specifications Compteurs d'eau froide - Specifications

European Committee for Standardization (CEN), watch glass specifications

  • EN ISO 25178-72:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p

Professional Standard - Intellectual Property, watch glass specifications

  • ZC 0004-2001 Form Formatting and Coding Standards Part 1: Form Code Rules

ISA - International Society of Automation, watch glass specifications

International Electrotechnical Commission (IEC), watch glass specifications

  • IEC 62276:2012 Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods

ECMA - European Association for Standardizing Information and Communication Systems, watch glass specifications

  • TR 48-1988 Study on the Translation of the ODA Formatted Form into Page Description Languages

GM North America, watch glass specifications

NO-SN, watch glass specifications

  • NS 8030-1983 Surface coatings - Determination of adhesion - Cross-cut method

BELST, watch glass specifications

National Metrological Technical Specifications of the People's Republic of China, watch glass specifications

  • JJF 1476-2014 Calibration Specification for Surface Profile Gauges

Professional Standard - Light Industry, watch glass specifications

  • QB/T 1223-2012 Surface active agents.Water used as a solvent for tests.Specification and test methods
  • QB/T 1223-1991 Water specification and test method for use of surfactants as test solvents
  • QB 1223-1991 Water specification and test method for use of surfactants as test solvents

(U.S.) Ford Automotive Standards, watch glass specifications

SE-SIS, watch glass specifications

IT-UNI, watch glass specifications

  Specification Specification Preparation, Surface dish diameter, Heat-resistant plastic watch glass, german watch glass, funnel watch glass, Surface dish diameter, Surface glass size, Surface dish specification, Surface glass size, Surface dish specification, watch glass specifications, The model of the watch glass, watch glass material, Surface dish model, Acceptance of watch glass, plastic watch glass, Specifications, watch glass heat resistant, chemical watch glass, watch glass sample.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved