ZH
RU
ES
Test Analysis Granularity
Test Analysis Granularity, Total:497 items.
In the international standard classification, Test Analysis Granularity involves: Particle size analysis. Sieving, Vocabularies, Road vehicles in general, Rubber and plastics products, Fuels, Analytical chemistry, Earthworks. Excavations. Foundation construction. Underground works, Products of the chemical industry, Construction materials, Geology. Meteorology. Hydrology, Cutting tools, Testing of metals, Linear and angular measurements, Raw materials for rubber and plastics, Pesticides and other agrochemicals, Air quality, Soil quality. Pedology, Ceramics, Metalliferous minerals, Semiconducting materials, Road vehicle systems, Tobacco, tobacco products and related equipment, Medical equipment, Environmental protection, Animal feeding stuffs, Coals, Ferroalloys, Road engineering, Diagnostic, maintenance and test equipment, Leather technology, Sugar. Sugar products. Starch, Products of the textile industry, Plastics, Rubber, Civil engineering in general, Water quality, Power stations in general, Protection against dangerous goods, Laboratory medicine, Paint ingredients, Paints and varnishes, Clothes, Refractories, Protective equipment, Milk and milk products, Inks. Printing inks, Test conditions and procedures in general, Lubricants, industrial oils and related products, Materials and components for railway engineering, Compressors and pneumatic machines, Fluid power systems, Special purpose vehicles, Insulating fluids, Nuclear energy engineering, Cork and cork products, Inorganic chemicals, Gas and steam turbines. Steam engines.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test Analysis Granularity
- GB/T 42348-2023 Particle Size Analysis Particle Tracking Analysis (PTA)
- GB/T 15445-1995 Graphical representation of results of particle size analysis
- GB/T 41949-2022 Particle─Laser particle size analyser─Technical requirements
- GB 15445-1995 Graphical representation of particle size analysis results
- GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
- GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
- GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle size
- GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm
- GB/T 31057.1-2014 Granular materials.The physical properties.Part 1:Determination of apparent density
- GB/T 7702.3-1997 Standard test method for granular activated carbon from coal--Determination of hardness
- GB/T 7702.3-2008 Test method for granular activated carbon from coal-Determination of hardness
- GB/T 30202.2-2013 Test method for granular coal-based activated carbon for desulfurization and denitration process.Part 2 : Particle size
- GB/T 27991-2011 Fundamental technical requirements for sediment measurement and particle size analysis instrument in open channel
- GB/T 7702.4-1997 Standard test method for granular activated carbon from coal--Determination of apparent density
- GB/T 14853.6-2013 Rubber compounding ingredients.Pelletized carbon black.Part 6:Determination of individual pellet crushing strength
- GB/T 27845-2011 Chemicals.Test method for particle-size analysis of soils
- GB/T 7702.15-2008 Test method for granular activated carbon from coal.Determination of ash content
- GB/T 25266-2010 Paints.Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method
- GB/T 9258.2-2000 Coated abrasives-Grain size analysis-Part 2: Determination of grain size distribution of macrogrits P12 to P220
- GB/T 9258.2-2008 Coated abrasives.Grain size analysis.Part 2:Determination of grain size distribution of macrogrits P12 to P220
- GB/T 7702.15-1997 Standard test method for granular activated carbon from coal--Determination of ash content
- GB/T 7702.1-1997 Standard test method for granular activated carbon from coal--Determination of moisture content
- GB/T 43196-2023 Nanotechnology Scanning Electron Microscopy to Measure Nanoparticle Size and Shape Distribution
- GB/T 9258.3-2000 Coated abrasives-Grain size analysis-Part 3: Determination of grain size distribution of microgrits P240 to P2500
- GB/T 13277.8-2023 Compressed air part 8: Methods of measurement of mass concentration of solid particles
- GB/T 9258.3-2017 Coated abrasives.Grain size analysis.Part 3:Determination of grain size distribution of microgrits P240 to P2 500
- GB/T 22459.5-2008 Refractory mortars.Part 5:Determination of grain size distribution(sieve analysis)
- GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
- GB/T 43211-2023 Test Method for Particle Size Determination of Softwood Pellets by Mechanical Sieving
- GB/T 21865-2008 Standard test methods for determining average grain size using semiautomatic and automatic image analysis
- GB/T 20117-2006 Fine ceramics（advanced ceramics,advanced technical cermics）--Sample prepartion for the determination of particle size distribution of ceramic powders
- GB/T 6609.27-2004 Chemical analysis methods and determination of physical performance of alumina Particle size analysis-Sieving method
Association Francaise de Normalisation, Test Analysis Granularity
- NF X11-630:2001 Particle size analysis - Vocabulary.
- NF B57-011:1973 Granulés crus de liège - Analyse granulométrique.
- NF T20-223:1973 Aluminium oxide primarily used for the production of aluminium. Particle size analysis. Sieving method.
- NF X11-682:1984
- NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
- NF EN 15415-3:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 3 : méthode par analyse d'images des particules de grande dimension
- NF X11-632:1990 SIZE DETERMINATION. EXPRESSION FO RESULTS OF SIZE DETERMINATION.
- NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
- NF X34-214-3*NF EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3 : method by image analysis for large dimension particles
- NF E75-100*NF ISO 6344-1:2001 Coated abrasives - Grain size analysis - Part1 : grain size distribution test.
- NF P94-057:1992 Soils investingation and testing. Granulometric analysis. Hydrometer method.
- NF X11-666:1984 PARTICLE SIZE ANALYSIS OF POWDERS. DIFFRACTION METHOD.
- XP T47-752:2007 End of Life Tyres (ELF) - Determination of the particle size analysis of granulates issued from End of Life Tyres - Method based on the mechanical sieving of product
- NF EN ISO 17830:2016 Biocombustibles solides - Détermination de la distribution granulométrique des granulés désintégrés
- NF EN ISO 17831-1:2016 Biocombustibles solides - Détermination de la résistance mécanique des granulés et des briquettes - Partie 1 : granulés
- NF X11-632-4*NF ISO 9276-4:2001 Representation of results of particle size analysis - Part 4 : characterization of a classification process
- NF V37-001*NF ISO 4387:2020 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- NF X11-683:1981
- NF P94-056:1996 Soil : investigation and testing. Granulometric analysis. Dry sieving method after washing.
- NF X43-133*NF EN ISO 28439:2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential mobility analysing systems.
- NF ISO 4387:2020 Cigarettes - Détermination de la teneur en matière particulaire totale et en matière particulaire anhydre et exempte de nicotine au moyen d'une machine à fumer analytique de routine
- NF E75-100-3:2013 Coated abrasives - Grain size analysis - Part 3: determination of grain size distribution of microgrits P240 to P2500
- NF EN 15415-2:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Méthode (manuelle) de projection de la longueur maximale des particules de grande dimension
- NF R19-501-6:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 6 : particle mass determination by gravimetric analysis.
- NF R19-501-8:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 8 : particle nature determination by microscopic analysis.
- NF EN 933-1:2012 Essais pour déterminer les caractéristiques géométriques des granulats - Partie 1 : détermination de la granularité - Analyse granulométrique par tamisage
- NF P18-566:2014 Granulats - Analyse granulométrique - Essai à l'aide d'un appareil d'ombroscopie
- NF ISO 6344-2:2022 Abrasifs appliqués - Détermination et désignation de la distribution granulométrique - Partie 2 : macrograins P12 à P220
- NF P94-512-3*NF EN ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3 : determination of particle density
- NF X11-661:1990 Particle size analysis. Determination of particle size of powders. Optical microscope method.
- NF T30-044:1968 Paints. Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method.
- NF EN 15415-1:2011 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 1 : méthode de criblage pour des particules de petites dimensions
- NF EN ISO 17892-3:2015 Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 3 : détermination de la masse volumique des particules solides
- NF E48-660:1991 Hydraulic fluid systems. Fluids. Determination of solid particulate contamination by optical microscope and image analysis.
- NF P18-622-3*NF EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3 : determination of particle shape - Flakiness index
- NF P12-301*NF EN 1015-1:1999 Methods of test for mortar for masonry. Part 1 : determination of particle size distribution (by sieve analysis).
- NF EN ISO 13982-2:2005 Vêtements de protection à utiliser contre les particules solides - Partie 2 : méthode d'essai pour la détermination de la fuite vers l'intérieur d'aérosols de fines particules dans des combinaisons
- NF ISO 12500-3:2009 Filtres pour air comprimé - Méthodes d'essai - Partie 3 : particules
- NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique
- NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
- XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
- NF P18-650-6:2014 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
- NF X11-670:1989 Particle size analysis in an electrolytic suspension using a resistance variation counter.
- NF X34-214-2*NF EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2 : maximum projected length method (manual) for large dimension particles.
- NF P18-650-6*NF EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
- NF P98-916-3*NF EN 15429-3:2015 Sweepers - Part 3 : efficiency of particulate matter collection - Testing and evaluation
- NF EN 15429-3:2015 Balayeuses - Partie 3 : efficacité de la collecte des matières particulaires - Essai et évaluation
- NF EN 13205-4:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 4 : essai de performances en laboratoire par comparaison des concen...
- NF ISO 719:2020 Verre - Résistance hydrolytique du verre en grains à 98 oC - Méthode d'essai et classification
- NF ISO 720:2020 Verre - Résistance hydrolytique du verre en grains à 121 oC - Méthode d'essai et classification
- NF V37-209*NF ISO 20779:2018 Cigarettes - Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime
- NF ISO 20779:2018 Cigarettes - Génération et collecte de la matière particulaire totale au moyen d'une machine à fumer analytique de routine avec un régime de fumage intense
Japanese Industrial Standards Committee (JISC), Test Analysis Granularity
- JIS Z 8829:2021 Particle size analysis -- Particle tracking analysis (PTA) method
- JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
- JIS K 6219-4:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 4: Determination of pellet size distribution
- JIS R 1620:1995 Testing methods for particle density of fine ceramic powder
- JIS R 1639-5:2007 Test methods of properties of fine ceramic granules Part 5: Compressive strength of a single granule
- JIS G 1641:1998 Methods of sampling for size analysis of ferroalloys and size determination
- JIS R 6001-2:2017 Bonded abrasives -- Determination and designation of grain size distribution -- Part 2: Microgrits
- JIS R 1619:1995 Testing method for size distribution of fine ceramic particles by liquid photosedimentation method
- JIS K 6219-3:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 3: Determination of individual pellet crushing strength
- JIS R 1639-2:1999 Test methods of properties of fine ceramic granules Part 2: Bulk density
- JIS Z 7151:2000 Stationary source emissions -- Determination of concentration and mass flow rate of particulate material in gas-carrying ducts -- Manual gravimetric method
- JIS B 8392-8:2008 Compressed air -- Part 8: Test methods for solid particle content by mass concentration
国家市场监督管理总局、中国国家标准化管理委员会, Test Analysis Granularity
- GB/T 38879-2020 Particle—Size analysis—Color image analysis methods
- GB/T 31057.2-2018 Granular materials—Physical properties—Part 2: Determination of tap density
- GB/T 37162.1-2018 Hydraulic fluid power—Monitoring the level of particulate contamination of the fluid—Part 1: General principles
- GB/T 22459.5-2022 Refractory mortars—Part 5: Determination of grain size distribution ( sieve analysis )
- GB/T 35097-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air
- GB/T 31057.3-2018 Granular materials—Physical properties—Part 3: Fluidity index
ES-AENOR, Test Analysis Granularity
PT-IPQ, Test Analysis Granularity
The American Road & Transportation Builders Association, Test Analysis Granularity
- AASHTO T311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials Twentieth Edition
- AASHTO T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials
- AASHTO T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
- AASHTO T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
- AASHTO T 195-1967 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
- AASHTO T 311-2000(R2010) Standard Method of Test for Grain-Size Analysis of Granular Soil Materials
- AASHTO T 195-1967(R2007) Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
- AASHTO T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
- AASHTO T88-2000 Standard Method of Test for Particle Size Analysis of Soils Twentieth Edition
American Society for Testing and Materials (ASTM), Test Analysis Granularity
- ASTM D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D2862-10 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
- ASTM D2862-16 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
- ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
- ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
- ASTM D422-63(2007)e1 Standard Test Method for Particle-Size Analysis of Soils
- ASTM D422-63(1998) Standard Test Method for Particle-Size Analysis of Soils
- ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D7486-08(2013)e1 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM E871-82(2019) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
- ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
- ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
- ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
- ASTM E2524-08 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
- ASTM D421-85(2007) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
- ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
- ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
- ASTM D5644-96 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Vulcanized Particulate Rubber
- ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
- ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM D5444-98 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
- ASTM D7928-21 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- ASTM D7928-16e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- ASTM D7928-21e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- ASTM D7928-17 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- ASTM E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM D8108-21e1 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
- ASTM D422-63(2007) Standard Test Method for Particle-Size Analysis of Soils
- ASTM D422-63(2007)e2 Standard Test Method for Particle-Size Analysis of Soils
- ASTM D1511-00e2 Standard Test Method for Carbon Black-Pellet Size Distribution
- ASTM E872-82(1998) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
- ASTM E872-82(2019) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
- ASTM D5644-18 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
- ASTM E382-07 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
- ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM D451-91(1996)e1 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
- ASTM D451/D451M-17 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
- ASTM D6913-04(2009)e1 Standard Test Methods for Particle-Size Distribution 40;Gradation41; of Soils Using Sieve Analysis
- ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
- ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
- ASTM D8090-17 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
- ASTM D2067-97 Standard Test Method for Coarse Particles in Printing Ink Dispersions
- ASTM D2067-97(2003) Standard Test Method for Coarse Particles in Printing Ink Dispersions
- ASTM D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
- ASTM F1926/F1926M-14(2021) Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings
- ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM D7596-23 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
- ASTM D7596-14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
- ASTM D7619-22 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM D1921-01 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM E871-82(2006) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
- ASTM D1921-96 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM D1921-06 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM E871-82(2013) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
- ASTM D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM D5821-01(2006) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5821-95 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5821-01 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM E1534-93(2013) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
- ASTM E1534-93(2019) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
- ASTM C697-16 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
- ASTM D4749-87 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
- ASTM D5644-01(2008) Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
- ASTM D8049-19a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
- ASTM D8049-19 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
- ASTM D8049-21 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
- ASTM E1382-97 Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
- ASTM E1382-97(2004) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
- ASTM D5821-13 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5821-13(2017) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5444-05 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
- ASTM D5444-08 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
- ASTM D5444-15 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
AASHTO - American Association of State Highway and Transportation Officials, Test Analysis Granularity
- T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials (Twentieth Edition)
- T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
- T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
- T 88-2000 Standard Method of Test Particle Size Analysis of Soils
- T88-1993 Standard Method of Test for Particle Size Analysis of Soils
- T88-2000 Standard Method of Test for Particle Size Analysis of Soils (Twentieth Edition)
- T 195-2018 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
- T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
British Standards Institution (BSI), Test Analysis Granularity
- 23/30436644 DC BS ISO 19430. Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
- BS ISO 15900:2020 Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
- BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution. Method by image analysis for large dimension particles
- BS ISO 13067:2011 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
- 19/30370177 DC BS ISO 15900. Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
- BS ISO 6344-1:1998 Coated abrasives. Grain size analysis. Grain size distribution test
- BS ISO 8511:2011 Rubber compounding ingredients. Carbon black. Determination of pellet size distribution
- BS ISO 6344-3:2013 Coated abrasives. Grain size analysis. Determination of grain size distribution of microgrits P240 to P2500
- BS ISO 16232-8:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle nature determination by microscopic analysis
- BS ISO 4387:2000+A1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- BS PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
- BS ISO 16232-6:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle mass determination by gravimetric analysis
- BS ISO 9276-6:2008 Representation of results of particle size analysis - Descriptive and quantitative representation of particle shape and morphology
- BS EN 15415-1:2011 Solid recovered fuels. Determination of particle size distribution. Screen method for small dimension particles
- BS ISO 4387:2019 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- BS ISO 4387:2000+A2:2017 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- BS EN 1015-1:1999 Methods of test for mortar for masonry - Determination of particle size distribution (by sieve analysis)
- BS ISO 6344-2:1998 Coated abrasives - Grain size analysis - Determination of grain size distribution of macrogrits P12 to P220
- BS ISO 17175:2017 Bidis. Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine
- BS 812-103.1:1985 Testing aggregates. Method for determination of particle size distribution. Sieve tests
- 19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
- 17/30337552 DC BS ISO 17175. Bidis. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- BS ISO 13765-5:2004 Refractory mortars - Determination of grain size distribution (sieve analysis)
- BS 1743-19:1985 Methods for analysis of dried milk and dried milk products - Determination of scorched particles content
- BS EN ISO 17892-3:2015 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle density
- BS EN 15415-2:2012 Solid recovered fuels. Determination of particle size distribution. Maximum projected length method (manual) for large dimension particles
- BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
- BS ISO 15900:2009 Determination of particle size distribution - Differential electrical mobility analysis for aerosol particles
- BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
- BS EN 1097-6:2000 Tests for mechanical and physical properties of aggregates - Determination of particle density and water absorption
- BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
- BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
- BS ISO 14952-3:2003 Space systems. Surface cleanliness of fluid systems - Analytical procedures for the determination of nonvolatile residues and particulate contamination
- 20/30392580 DC BS EN 1097-6. Tests for mechanical and physical properties of aggregates. Part 6. Determination of particle density and water absorption
- BS ISO 20779:2018+A1:2019 Cigarettes. Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime
International Organization for Standardization (ISO), Test Analysis Granularity
- ISO 13320:2009 Particle size analysis - Laser diffraction methods
- ISO 15900:2020 Determination of particle size distribution — Differential electrical mobility analysis for aerosol particles
- ISO/TR 23173:2021 Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings
- ISO 16232-8:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis
- ISO 6344-3:2013 Coated abrasives.Grain size analysis.Part 3: Determination of grain size distribution of microgrits P240 to P2500
- ISO 105-Z05:1996 Textiles - Tests for colour fastness - Part Z05: Determination of the dusting behaviour of dyes
- ISO 9276-6:2008 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology
- ISO 16232-6:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis
- ISO 18747-1:2018 Determination of particle density by sedimentation methods - Part 1: Isopycnic interpolation approach
- ISO 18747-2:2019 Determination of particle density by sedimentation methods — Part 2: Multi-velocity approach
- ISO 8486:1986 Bonded abrasives; Grain size analysis; Designation and determination of grain size distribution of macrogrits F4 to F220
- ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
- ISO 6344-3:1998/Cor 1:1999 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500; Technical Corrigendum 1
- ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
- ISO 15900:2009 Determination of particle size distribution - Differential electrical mobility analysis for aerosol particles
- ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
- ISO 8573-8:2004 Compressed air - Part 8: Test methods for solid particle content by mass concentration
- ISO 8573-4:2001 Compressed air - Part 4: Test methods for solid particle content
- ISO 8573-4:2019 Compressed air — Contaminant measurement — Part 4: Particle content
- ISO 4387:1991 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- ISO 4387:2019 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- ISO 13765-5:2004 Refractory mortars - Part 5: Determination of grain size distribution (sieve analysis)
- ISO 20779:2018 Cigarettes — Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime
AR-IRAM, Test Analysis Granularity
German Institute for Standardization, Test Analysis Granularity
- DIN 50452-2:2009-10 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 2: Determination of particles by optical particle counters
- DIN 50452-1:1995-11 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles
- DIN 66111 Bb.1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
- DIN ISO 6344-1:2000 Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (ISO 6344-1:1998)
- DIN EN 15415-3:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
- DIN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density, Pycnometer method (ISO/TS 17892-3:2004); German version CEN ISO/TS 17892-3:2004
- DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
- DIN ISO 4387:2021-03 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine (ISO 4387:2019)
- DIN ISO 6344-3:2000 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998)
- DIN ISO 9136-1:2006-03 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004)
- DIN 66135-1:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
- DIN EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
- DIN ISO 9276-6:2012-01 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology (ISO 9276-6:2008)
- DIN 53477:1992 Testing of plastics; determination of particle size distribution of moulding materials by dry sieving analysis
- DIN 53477:2018 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
- DIN EN ISO 17892-3:2016-07 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15); German version EN ISO 17892-3:2015
- DIN ISO 6344-3:2017 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500 (ISO 6344-3:2013)
- DIN 53477:2018-09 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
- DIN ISO 9276-6:2012 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology (ISO 9276-6:2008)
- DIN 66135-3:2001 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
- DIN 18124:2019-02 Soil, investigation and testing - Determination of density of solid particles - Wide mouth pycnometer
- DIN 66135-1:2001 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
- DIN EN 933-7:1998 Tests for geometrical properties of aggregates - Part 7: Determination of shell content; percentage of shells in coarse aggregates; German version EN 933-7:1998
- DIN 54408:2007 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
- DIN 54408:1998 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
- DIN EN 15415-1:2011-11 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles; German version EN 15415-1:2011
- DIN EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- DIN EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
- DIN EN 1097-6:2022-05 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2022
- DIN EN 15415-2:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles; German version EN 15415-2:2012
- DIN ISO 6344-2:2000 Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P 12 to P 220 (ISO 6344-2:1998)
- DIN EN 1015-1:2007-05 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis); German version EN 1015-1:1998+A1:2006
- DIN EN 1097-6:2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2000 + AC:2002 + A1:2005
- DIN EN 1097-6:2020 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German and English version prEN 1097-6:2020
- DIN EN 15429-3:2015-05 Sweepers - Part 3: Efficiency of particulate matter collection - Testing and Evaluation; German version EN 15429-3:2015
- DIN 50452-3:1995 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 3: Calibration of optical particle counters
- DIN 66135-3:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
- DIN EN 1097-7:2022-12 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2022
- DIN EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- DIN EN 1744-1:2013 Tests for chemical properties of aggregates - Part 1: Chemical analysis; German version EN 1744-1:2009+A1:2012
- DIN 51938:1994 Testing of carbon materials; determination of particle size distribution by sieving; solid matters
- DIN 51938:2015 Testing of carbonaceous materials - Determination of particle size distribution by sieving - Solid matters
RO-ASRO, Test Analysis Granularity
Professional Standard - Water Conservancy, Test Analysis Granularity
- SL 237-006-1999 Code for test of soil - grain size analysis test
- SL/T 208-1998 Instrument for sediment measurement and particle size analysis in open channel
PL-PKN, Test Analysis Granularity
- PN Z04097 Arkusz 07-1974 Air purity protection Tests for size composition of dust Sieve analysis
- PN B06714-43-1987 Mineral aggregates Testings Determination of compressive strength of particles contents
- PN Z04097 Arkusz 06-1974 Air purity protection Tests for size composition of dust Determination of particie size of dust with the aid of rotary separator
- PN C89421-1991 Aqueous dispersions of polymers and copolymers. Determination of gross particle content by sieve analysis
- PN Z04097 Arkusz 04-1974 Air purity protection Tests for size composition of dust Determination of weight particie size of dust with the aid of sedimentation pipette
AENOR, Test Analysis Granularity
- UNE 56919:1990 GRANULATED CORK. BULK DENSITY TEST.
- UNE-EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
- UNE-ISO 4387:2008 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
- UNE-ISO 4387:2008/A1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
- UNE-EN 15415-1:2012 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
- UNE-EN 1097-6:2014 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- UNE-EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
- UNE-EN 1097-7:2009 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- UNE 103900:2013 In situ determination of density and moisture content of soil and granular materials by nuclear methods: low depths.
ZA-SANS, Test Analysis Granularity
- SANS 3001-GR2:2009 Civil engineering test methods Part GR2: Dry preparation and dry particle size analysis of graded materials
- SANS 3001-AG1:2009 Civil engineering test methods Part AG1: Particle size analysis of aggregates by sieving
North Atlantic Treaty Organization Standards Agency, Test Analysis Granularity
- STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER
Professional Standard - Meteorology, Test Analysis Granularity
- QX/T 72-2007 Determination of number size distribution of submicron particle by using Electrical Mobility Method
未注明发布机构, Test Analysis Granularity
- BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
- DIN EN 933-1:1997 Test for geometrical properties of aggregates — Part 1: Determination of particle size distribution — Granulometric analysis, Sieving method
- ISO 6344-1:1998/Cor 1:1999 Coated abrasives — Grain size analysis — Part 1 : Grain size distribution test
- DIN EN 1097-6:2001 Tests for mechanical and physical properties of aggregates — Part 6: Determination of particle density and water absorption
- BS 3482-7:1991(1999) Methods of test for Desiccants — Part 7 : Determination of particle size
- BS EN 1015-1:1999(2007) Methods of test for mortar for masonry — Part 1 : Determination of particle size distribution (by sieve analysis)
- BS ISO 13765-5:2005 Refractory mortars — Part 5 : Determination of grain size distribution (sieve analysis)
- DIN EN 1097-7:1999 Tests for mechanical and physical properties of aggregates — Part 7: Determination of the particle density of filler — Pycnometer method
NATO - North Atlantic Treaty Organization, Test Analysis Granularity
- STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +
- AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (
SE-SIS, Test Analysis Granularity
European Committee for Standardization (CEN), Test Analysis Granularity
- EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
- EN 1744-1:2009 Tests for chemical properties of aggregates - Part 1: Chemical analysis (Incorporates Amendment A1: 2012)
- EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
- FprEN 1097-6-2021 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- PD CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
- EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- EN 15429-3:2015 Sweepers - Part 3: Efficiency of particulate matter collection - Testing and Evaluation
- PREN 1097-7-2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
IT-UNI, Test Analysis Granularity
RU-GOST R, Test Analysis Granularity
- GOST 34236-2017 Light and middle distillate fuels. Determination of sizing and counting particles by automatic particle counter
- GOST R 55552-2013 Solid recovered fuels. Determination of particle size distribution. Part 3. Method by image analysis for large dimension particles
- GOST 32518.2-2013 Iron ores, concentrates, agglomerates and pellets. Determination of silica spectrophotometric method
- GOST R 55550-2013 Solid biofuels. Determination of particle size distribution of disintegrated pellets
- GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
- GOST R ISO 12984-2015 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
- GOST ISO 13765-5-2017 Refractory mortars. Determination of grain size distribution (sieve analysis)
- GOST R 55566-2013 Solid recovered fuels. Determination of particle size distribution. Part 1. Screen method for small dimension particles
- GOST R 55549-2013 Solid recovered fuels. Determination of particle size distribution. Part 2. Maximum projected length method (manual) for large dimension particles
BE-NBN, Test Analysis Granularity
Lithuanian Standards Office , Test Analysis Granularity
- LST EN 15415-3-2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
- LST EN 16126-2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
- LST ISO 4387:2000 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles
- LST EN 15415-1-2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
- LST EN 1097-6+AC-2003 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- LST EN 1097-6+AC-2003/A1-2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- LST EN 15415-2-2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
- LST 1360.1-1995 Soils for road construction. Testing methods. Determination of particle. Size distribution
- LST ISO 4387:2000/A1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine - AMENDMENT 1 (ISO 4387:2000/Amd.1:2008, identical)
- LST EN 1097-6-2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- LST EN 1097-7-2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
Danish Standards Foundation, Test Analysis Granularity
- DS/EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
- DS/EN 16126:2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
- DS/ISO 15900:2020 Determination of particle size distribution – Differential electrical mobility analysis for aerosol particles
- DS/ISO 4387/Amd. 1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- DS/ISO 4387:2000 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- DS/EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
- DS/EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- DS/EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
- DS/EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Test Analysis Granularity
- GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces
- GB/T 15445.6-2014 Representation of results of particle size analysis—Part 6: Descriptive and quantitative representation of particle shape and morphology
Korean Agency for Technology and Standards (KATS), Test Analysis Granularity
- KS L ISO 6344-1:2005 Coated abrasives-Grain size analysis-Part 1:Grain size distribution test
- KS M ISO 8511-2007(2022) Rubber compounding ingredients－Carbon black－Determination of pellet size distribution
- KS M ISO 8511-2007(2017) Rubber compounding ingredients－Carbon black－Determination of pellet size distribution
- KS L ISO 14703:2001 Fine ceramics(advanced ceramics, advanced technical ceramics)-Sample preparation for the determination of particle size distribution of ceramic powders
- KS L 6523-2016 Coated abrasives－Determination of grain size distribution of microgrits P12 to P220
- KS L ISO 14703:2016 Fine ceramics(advanced ceramics, advanced technical ceramics)－Sample preparation for the determination of particle size distribution of ceramic powders
- KS L ISO 6344-1-2005(2010) Coated abrasives－Grain size analysis－Part 1：Grain size distribution test
- KS M ISO 3379-2016(2021) Leather－Determination of distension and strength of grain－Ball burst test
- KS L 1614-2001 Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
- KS D 0046-2002 Methods of sampling for size analysis of ferroalloys and size determination
- KS M 5976-1994(2000) TEST METHOD FOR PARTICLE SIZE AND DISTRIBUTION OF POWDER COATING
- KS H ISO 17175:2019 Bidis — Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine.
- KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
- KS H ISO 4387:2017 Cigarettes－Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- KS H ISO 4387:2020 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
- KS B ISO 8573-8-2005(2010) Compressed air－Part 8：Test methods for solid particle content by mass concentration
- KS B ISO 8573-8:2005 Compressed air-Part 8:Test methods for solid particle content by mass concentration
- KS B ISO 8573-8:2013 Compressed air－Part 8：Test methods for solid particle content by mass concentration
- KS H ISO 15592-3-2013(2018) Fine-cut tobacco and smoking articles made from it－Methods of sampling, conditioning and analysis－Part 3：Determination of total particulate matter of smoking articles using a routine analytical smokin
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Test Analysis Granularity
- GJB 380.4A-2004 Contamination test method of operating liquid for aviation Part 4:Determination of solid particle contamination level by automatic particle counting method
- GJB 380.5A-2004 Contamination test method of operating liquid for aviation Part 5:Determination of solid particle contamination level by counting method using a microscope
- GJB 380.8A-2004 Contamination test method of operating fluid for aviation Part 8:Determination of solid particle contamination level by compare method using a microscope
Military Standard of the People's Republic of China-General Armament Department, Test Analysis Granularity
- GJB 380.4A-2015 Aviation Service Fluid Contamination Testing Part 4: Determination of Solid Particle Contamination by Automatic Particle Counting Method
- GJB 380.4-1987 Aircraft hydraulic system contamination test uses automatic particle counter to determine oil solid particle contamination degree
- GJB 380.5A-2015 Aviation working fluid contamination test Part 5: Determination of solid particle contamination by microscopic counting method
- GJB 380.8A-2015 Aviation working fluid contamination test Part 8: Determination of solid particle contamination by microscopic contrast method
YU-JUS, Test Analysis Granularity
- JUS K.F0.002-1989 GraJns of fused aluminium oxide and silicon carbide for boodod abrasivc products. Grain si?e analysis of macrogrits F 4 to F 220
- JUS H.P5.011-1991 Testing of pesticides.Dusts,granules,microgranules and water-dispersible powder.Determination of bulk density
- JUS K.F0.033-1989 GraJns of fused aluminium oxlde and sIlIcon carbide for coated abrasive producls. Grain slze analysis of microgrits P 240 to P 1200
- JUS K.F0.032-1989 Grains of fused aluminium oxJde and slllcon carbide for coated abrasive products. Graln sir.e analysls of macrogrlts P 12 to P 220
- JUS K.F0.004-1989 Gralns of fused alumlnium oxide and slllccm carbide for bonded abrasive. products. Grala si?e analysis of microgrits P 230 to F 1200
- JUS B.B8.036-1982 Crushed aggregate. Determination of fine particles with the wet sieve analysis
- JUS U.B1.018-1980 Testing ofsoils. Determination ofparticle si?e distribution
- JUS B.D8.311-1984 Refractories. Methods of physical testing. Determ inati on of the bulk density of granular refractory materials and raws
CU-NC, Test Analysis Granularity
- NC 04-67-1985 Materials Testing. Metallic Powders. Granulometry Analysis by Sieving
- NC 93-02-221-1986 Standards System for Environmental Protection. Atmosphere. Gravimetric Determination of Float Dust
Association of German Mechanical Engineers, Test Analysis Granularity
- VDI 2268 Blatt 3-1988 Chemical analysis of particulate matter; determination of thallium in particulate emissions by atomic absorption spectrometry
- VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
- VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
- VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
- VDI 2268 Blatt 1-1987 Chemical analysis of particulate matter; determination of Ba, Be, Cd, Co, Cr, Cu, Ni, Pb, Sr, V, Zn in particulate emissions by atomic spectrometric methods
- VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
- VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
- VDI 3491 Blatt 2-2017 Measurement of particles - Methods for generating test aerosols - Dispersing liquids
- VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
IN-BIS, Test Analysis Granularity
Professional Standard - Ferrous Metallurgy, Test Analysis Granularity
- YB/T 4183-2009 Laser Diffraction Method for Determination of Particle Size Distribution of Smelting Slag Powder
Professional Standard - Aviation, Test Analysis Granularity
- HB 5931.4-1986 Determination of Solid Particle Contamination Degree of Working Fluid Using Automatic Particle Counter for Contamination Test of Aircraft Hydraulic System
CZ-CSN, Test Analysis Granularity
- CSN 46 7092-38-1998 Testing methods for feeding stuffs - Part 38: Determination of granules strength when pressed
- CSN 79 3822-1961 Testing of leathers. Strength of leather grain at double bending
- CSN 46 1011-11-2003 Testing of cereals, pulses and oilseeds - Part 11: Testing of cereals - Determination of the rate of grains with reduced vitreousness of durum wheat (Triticum durum)
- CSN 79 3832-1994 Testing of leathers. Distension and strength of leathers grain. The balí burst test
- CSN 01 5030 Za-1983
- CSN 46 7092-39-1998 Testing methods for feeding stuffs - Part 39: Determination of granules resistence when wiped
- CSN 46 7092-36-1998 Testing methods for feeding stuffs - Part 36: Determination of crumbled scrap in granuled feeding stuffs
- CSN 46 7092-40-1998 Testing methods for feeding stuffs - Part 40: Size determination of granules and briquettes
- CSN 46 7092-35-1998 Testing methods for feeding stuffs - Part 35: Determination of granularity
Standard Association of Australia （SAA）, Test Analysis Granularity
- AS 1038.18:2006 Coal and coke - Analysis and testing - Coke - Size analysis
- AS 2891.11:2005 Methods of sampling and testing asphalt - Degree of particle coating
- AS 4350.1:2005 Heavy mineral sand concentrates - Physical testing - Size analysis
- AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
- AS 1141.7:1995 Methods for sampling and testing aggregates - Apparent particle density of filler
- AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
- AS/NZS 3580.10.2:2013
- AS/NZS 3580.9.12:2013
- AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
- AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
- AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
Professional Standard - Petrochemical Industry, Test Analysis Granularity
- SH/T 0573-1993 In-use Lubricating Oil Wear Particle Test (Analytical Ferrography)
Indonesia Standards, Test Analysis Granularity
- SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.
- SNI 13-6580-2001 Test methods for particle size distribution of peat materials for horticultural purposes
PH-BPS, Test Analysis Granularity
- PNS ISO 6344-3:2021 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500
- PNS ISO 9136-1:2021 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
- PNS ISO 19007:2021 Nanotechnologies - In vitro MTS assay for measuring the cytotoxic effect of nanoparticles
- PNS ISO 17892-3:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
Taiwan Provincial Standard of the People's Republic of China, Test Analysis Granularity
ES-UNE, Test Analysis Granularity
- UNE-ISO 4387:2008/Amd 2:2018 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
- UNE-ISO 4387:2008/Amd.1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
- UNE-EN ISO 17892-3:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15)
- UNE-EN 15429-3:2015 Sweepers - Part 3: Efficiency of particulate matter collection - Testing and Evaluation
- UNE 77219:1998 ERRATUM:2009 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications.
NO-SN, Test Analysis Granularity
- NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles
- NS 8005-1990 Geotechnical testing - Laboratory methods - Grain-size analysis of soil samples
Occupational Health Standard of the People's Republic of China, Test Analysis Granularity
- GBZ/T 192.6-2018 Determination of dust in the air of workplaces - Part 6: Ultrafine particles and total fine particle concentration
Professional Standard - Electricity, Test Analysis Granularity
- DL/T 1915-2018 Gravimetric method for testing technical specifications of low-concentration particulate matter in thermal power plants
Group Standards of the People's Republic of China, Test Analysis Granularity
- T/CEC 426.3-2022 General Technical Conditions for Electric Power Oil Testing Instruments Part 3: Particle Size Meter
- T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
VN-TCVN, Test Analysis Granularity
- TCVN 6530-12-2007 Refractories.Method of test.Part 12: Determination of bulk density of granular materials
- TCVN 5257-1990 Cultivated soil.Determination of particle size distribution (Mechanical analysis)
KR-KS, Test Analysis Granularity
- KS K ISO 13982-2-2007(2022) Protective clothing for use against solid particulates－Part 2：Test method of determination of inward leakage of aerosols of fine particles into suits
- KS H ISO 17175-2019 Bidis — Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine.
- KS H ISO 4387-2020 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
Professional Standard - Commodity Inspection, Test Analysis Granularity
CEN - European Committee for Standardization, Test Analysis Granularity
- EN 14035-9:2004 Fireworks - Part 9: Crackling granules - Specification and test methods
Professional Standard - Pharmaceutical Packaging, Test Analysis Granularity
- YBB 0025(03)-2003 Determination and Classification of Water Resistance of Glass Particles at 121°C (Trial)
工业和信息化部, Test Analysis Granularity
- SH/T 1541.1-2019 Appearance test methods for plastic particles Part 1: Visual inspection method
Professional Standard - Agriculture, Test Analysis Granularity
- 空气和废气监测分析方法 5.3.2-2003 Chapter 5 Pollution Source Monitoring Chapter 3 Determination of Particulate Matter and Metal Compounds 2 Dust Particle Dispersion
- GB 3635-1983 Method for determination of crushing strength of fertilizer catalyst, molecular sieve and adsorbent particles
Professional Standard - Railway, Test Analysis Granularity
AT-ON, Test Analysis Granularity
- ONORM M 5858-1997 Air analysis - Ambient air monitoring - Requirements for monitors for suspended particulate matter - Marking of conformity
Professional Standard - Geology, Test Analysis Granularity
- DZ/T 0276.3-2015 Regulation for testing the physical and mechanical properties of rock.Part 3:Test for determining the grain density of rock
Professional Standard - Automobile, Test Analysis Granularity
- QC/T 29105.3-2013 Sampling methods of testing particulate contamination of hydraulic oil of special purpose vehicle hydraulic system
NZ-SNZ, Test Analysis Granularity
- NZS 4402.2.7.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.7: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.1: Method for Coarse, Medium and Fine Soils
Professional Standard - Machinery, Test Analysis Granularity
- JB/T 9591.3-2015 Gas turbine.Cleanliness verifing for oil system.Measuring particulate contaminant in oil by microscopic counting method
- JB/T 9591.3-1999 Cleanliness test for oil system of gas turbine measuring solid particle contaminant in oil liquid by microscopic counting method