ZH
RU
ES

two-point calibration

two-point calibration, Total:454 items.

In the international standard classification, two-point calibration involves: Linear and angular measurements, Semiconducting materials, Paper and board, Beverages, Glass, Analytical chemistry, Electricity. Magnetism. Electrical and magnetic measurements, Farming and forestry, Electrical engineering in general, Protection against fire, Construction of airports, Paints and varnishes, Character sets and information coding, Surface treatment and coating, Petroleum products in general, Road vehicle systems, Quality, Construction materials, Milk and milk products, Graphic technology, Air quality, Road engineering, Information sciences. Publishing, Protection against excessive pressure, Food products in general, Waxes, bituminous materials and other petroleum products, Fuels, Measurement of force, weight and pressure, Plastics, Edible oils and fats. Oilseeds, Tobacco, tobacco products and related equipment, Protection against dangerous goods, Animal feeding stuffs, Computer graphics, Lubricants, industrial oils and related products, Insulating materials, Welding, brazing and soldering, Organic chemicals, Products of the chemical industry, Crude petroleum, Sugar. Sugar products. Starch, Motor cycles and mopeds, Physics. Chemistry, Testing of metals, Ceramics, Buildings, Structures of buildings, Astronomy. Geodesy. Geography, Pesticides and other agrochemicals, Rubber, Extraction and processing of petroleum and natural gas, Electrical and electronic testing, Products of the textile industry, Paint ingredients, Acoustics and acoustic measurements, Adhesives, Materials for aerospace construction, Coals, Applications of information technology, Earthworks. Excavations. Foundation construction. Underground works, Electrical accessories, Earth-moving machinery.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, two-point calibration

GB/T 4380-2004 Assessment of departure from roundness Two-and three-point methods
GB/T 4380-1984 Assessment of departure from roundness--Two and three point methods
GB/T 15834-1995 Use of punctuations marks
GB/T 15834-2011 General rules for punctuation
GB/T 20264-2006 Grain and oilseed. Determination of moisture content. Twice drying method
GB/T 5917.1-2008 Determination of feed particle size.Two.sieve screening method
GB 267-1988 Determination of Flash and Fire Points of Petroleum Products (Open Cup Method)
GB/T 267-1988 Petroleum products--Determination of flash and fire points--Open cup
GB/T 382-1983(XG1-1991) Test methods for soft soldering fluxes—Part 6: Determination of halide(excluding fluoride)content
GB/T 3535-1983 Petroleum oils--Determination of pour point
GB/T 3145-1982 Benzene--Determination of crystallizing point
GB/T 14457.3-2008 Fragrance/Flavor substances.Method for determination of melting point
GB 382-1983 Kerosine—Determination of smoke point
GB 3145-1982 Benzene crystallization point determination method
GB/T 382-1983 Kerosene--Determination of smoke point
GB/T 6986-1986 Petroleum oils--Determination of cloud point
GB/T 1551-1995 Test method for resistivity of silicon and germanium bars using a two-point probe
GB/T 27653-2011 Methods for analysis of quaternary ammonium compounds in preservative-treated wood.2-Phase titration
GB/T 1602-2001 Testing method of melting point for pesticides
GB 4929-1985 Lubricating Grease Dropping Point Method
GB/T 4929-1985 Lubricating grease--Determination of dropping point
GB/T 12095-1989 Method for determination of spot of starch
GB/T 28912-2012 Test method for two phase relative permeability in rock
GB/T 5174-1985 Surface active agents--Detergents--Determination of cationic-active matter--Direct two-phase titration procedure
GB/T 4507-1999 Standard test method for softening point of bitumen (Ring-and-Ball Apparatus)
GB/T 4507-2014 Standard test method for softening point of bitumen.Ring-and-ball apparatus
GB/T 3069.2-1986 Method for the determination of the crystallization temperature of naphthalene
GB/T 2559-1981 Lignite wax--Determination of melting point
GB/T 2560-1981 Lignite wax--Determination of drop point
GB/T 2430-1981 Jet fuels--Determination of freezing-point
GB/T 4510-1984 Test method for determining the breaking point of petroleum bitumens
GB/T 510-1983 Petroleum products--Determination of solidification point
GB/T 3069.2-2005 Method for the determination of the crystallization temperature of naphthalene
GB/T 3535-2006 Petroleum products.Determination of pour point
GB 510-1983 Petroleum products--Determination of solidification point
GB/T 2430-2008 Standard test method for freezing point of aviation fuels
GB/T 6986-2014 Standard test method for cloud point of petroleum products
GB/T 510-2018 Determination of freezing point of petroleum products
GB/T 3536-1983 Petroleum products--Determination of flash and fire points--Cleveland open cup method
GB/T 5208-1985 Coatings--Flash point test--Rapid equilibrium method
GB/T 8591-2000 Earth-moving-Seat index point

SE-SIS, two-point calibration

SIS SS-ISO 4292:1991 Methods for the assessment of departure from roundness — Measurement by two- and three-point methods

Danish Standards Foundation, two-point calibration

DS/ISO 4292:1990 Methods for the assessment of departure from roundness - Measurement by two- and three-point methods
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN ISO 3680:2004 Determination of flash/no flash - Rapid equilibrium closed cup method
DS/ISO 5353:1986 Earth-moving machinery and tractors and machinery for agriculture and forestry. Seat index point
DS/EN ISO 2592:2001 Determination of flash and fire points - Cleveland open cup method

Association Francaise de Normalisation, two-point calibration

NF R14-316:1959 Reflectors. Two point attachment.
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF X20-105*NF ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
C51-211:1966 Motors for oil burning equipment with two-point mounting. Fixings and connections.
NF Z69-204*NF EN ISO 6709:2010 Standard representation of geographic point location by coordinates.
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF ISO 12963:2017 Analyse des gaz - Méthodes de comparaison pour la détermination de la composition des mélanges de gaz basées sur un ou deux points d'étalonnage
NF X06-063:1987 Applications de la statistique - Comparaison du rapport de deux variances - (deux écarts-types) à une valeur donnée.
NF X20-105/A1*NF ISO 12963/A1:2021 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - AMENDMENT 1 : correction to Formula 5
NF EN 1288-3:2000 Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 3 : essais avec éprouvettes supportées en deux points (flexion quatre points)
NF ISO 1242:2023 Huiles essentielles - Détermination de l'indice d'acide par deux méthodes de titrage, manuelle et automatique
NF T60-614*NF EN ISO 1516:2002 Determination of flash/no flash - Closed cup equilibrium method
NF EN ISO 3679:2022 Détermination du point d'éclair - Méthode de l'éclair de type passe/ne passe pas et méthode du point d'éclair en vase clos à petite échelle
NF T20-051:1985 Chemical products for industrial use. Determination of melting point. Method for the determination of cristallizing point (freezing point).
NF EN ISO 5764:2009 Lait - Détermination du point de congélation - Méthode au cryoscope à thermistance (Méthode de référence)
NF T60-616*NF EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method
NF T46-059:1988 RUBBER,VULCANIZED. DETERMINATION OF ADHESION TO METAL. TWO-PLATE METHOD.
NF V04-205*NF EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
NF S31-150:1990 Acoustics. Measurement of noise emitted by two-wheeled mopeds in motion. Engineering method.
NF T60-615*NF EN ISO 1523:2002 Determination of flash point - Closed up equilibrium method
NF V04-205:1990 Milk. Determination of freezing point. Thermistor cryoscope method.
NF ISO 12963/A1:2021 Analyse des gaz - Méthodes de comparaison pour la détermination de la composition des mélanges de gaz basées sur un ou deux points d'étalonnage - Amendement 1 : correction de la Formule 5
NF T60-118:2001 Determination of flash and fire points - Cleveland open cup method.

American Society for Testing and Materials (ASTM), two-point calibration

ASTM F397-93(1999) Standard Test Method for Resistivity of Silicon Bars Using a Two-Point Probe
ASTM D92-12a Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D92-12b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D3934-90(2001) Standard Test Method for Flash/No Flash Test8212;Equilibrium Method by a Closed-Cup Apparatus
ASTM D3934-90(1996)e1 Standard Test Method for Flash/No Flash Test8212;Equilibrium Method by a Closed-Cup Apparatus
ASTM D3934-90(2007) Standard Test Method for Flash/No Flash Test-Equilibrium Method by a Closed-Cup Apparatus
ASTM A239-14(2019) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
ASTM D5551-95(2019) Standard Test Method for Determination of the Cloud Point of Oil
ASTM A239-21 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
ASTM D5551-95(2012) Standard Test Method for Determination of the Cloud Point of Oil
ASTM D36/D36M-09 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM F1425-06 Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials
ASTM D5551-95(2006) Standard Test Method for Determination of the Cloud Point of Oil
ASTM D5551-95 Standard Test Method for Determination of the Cloud Point of Oil
ASTM D5551-95(2001) Standard Test Method for Determination of the Cloud Point of Oil
ASTM D1929-12 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D56-01 Standard Test Method for Flash Point by Tag Closed Tester
ASTM D56-00 Standard Test Method for Flash Point by Tag Closed Tester
ASTM D56-05(2010) Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM C598-93(2003) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2008) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2013) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D56-05 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D92-01 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
ASTM D92-98a Standard Test Method for Flash and Fire Points by Cleveland Open Cup
ASTM D56-16 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D92-11 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM C336-71(2010) Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
ASTM D93-00 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D93-02a Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D3143-08 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM D93-10a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D92-12 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM E1719-05 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
ASTM E1719-97 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
ASTM E1719-12 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
ASTM D6450-05 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D1929-19 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D5440-93(1997) Standard Test Method for Determining the Melting Point of Fats and Oils
ASTM D1929-11 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D5440-93(2009) Standard Test Method for Determining the Melting Point of Fats and Oils
ASTM D5440-17(2021) Standard Test Method for Determining the Melting Point of Fats and Oils
ASTM D1929-20 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13a Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D5440-17 Standard Test Method for Determining the Melting Point of Fats and Oils
ASTM D5798-15 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D56-87 Standard Test Method for Flash Point by Tag Closed Tester
ASTM D56-93 Standard Test Method for Flash Point by Tag Closed Tester
ASTM E3125-17 Standard Test Method for Evaluating the Point-to-Point Distance Measurement Performance of Spherical Coordinate 3D Imaging Systems in the Medium Range
ASTM E28-67 Standard Method Of Test For Softening Point By Ring-And-Ball Apparatus
ASTM D36/D36M-12 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM D5773-07 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D5773-15a Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM E1719-12(2018) Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
ASTM D5773-20 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D3874-10 Standard Test Method for Ignition of Materials by Hot Wire Sources
ASTM D5773-15 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D3104-99(2010) Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
ASTM D3104-14 Standard Test Method for Softening Point of Pitches 40;Mettler Softening Point Method41;
ASTM D92-05a(2010) Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D92-16b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D92-18 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D93-15a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D92-16 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D93-16 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D5773-02 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D5773-03 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D909-18e1 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM D909-18 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM D909-16 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM D909-17 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM D909-14 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM D3104-14a Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
ASTM C5-79(1997) Standard Specification for Quicklime for Structural Purposes
ASTM C5-03(2009) Standard Specification for Quicklime for Structural Purposes
ASTM C598-93(1998) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2019) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D5773-04 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D5773-95 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D5773-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM D3941-20 Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
ASTM D5773-05 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D5773-10 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D1016-99(2004)e1 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D1016-05e1 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D1016-05 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D1016-99 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D97-07 Standard Test Method for Pour Point of Petroleum Products
ASTM D1016-05(2010) Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D93-71 Standard Method Of Test For Flash Point By Pensky-Martens Closed Tester
ASTM D1929-16 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1016-05(2015) Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D3104-14a(2018) Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
ASTM D8254-19 Standard Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester
ASTM C1505-01 Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM C1505-01(2007) Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM E562-11 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM A937/A937M-01 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
ASTM A937/A937M-12(2019) Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
ASTM C1907-21 Standard Practice for Preparation of Plutonium Materials by Pyrohydrolysis for Determination of Fluoride, Chloride, or Both
ASTM D56-21 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D56-21a Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D93-10 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM F316-03 Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
ASTM D3808-01 Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
ASTM D3808-01(2007) Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
ASTM D3808-01(2013) Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
ASTM D5399-04 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
ASTM D5972-02 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D5972-02e1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM E562-01 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E562-05e1 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E562-19 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM D5773-17e1 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM E562-99 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E562-19e1 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM D7236-07(2013) Standard Test Method for Flash Point by Small Scale Closed Cup Tester lpar;Ramp Methodrpar;
ASTM D7236-16 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D7236-16a Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D7236-16a(2021) Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D5773-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM D5399-09 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
ASTM D5853-95 Standard Test Method for Pour Point of Crude Oils
ASTM F766-82(2000)e1 Standard Test Method for Melting Point of Waxes
ASTM D5853-95(2000)e1 Standard Test Method for Pour Point of Crude Oils
ASTM F766/F766M-82(2010)e1 Standard Test Method for Melting Point of Waxes
ASTM D5853-16 Standard Test Method for Pour Point of Crude Oils
ASTM D5853-17 Standard Test Method for Pour Point of Crude Oils
ASTM D3954-15(2022) Standard Test Method for Dropping Point of Waxes
ASTM D5853-17a Standard Test Method for Pour Point of Crude Oils
ASTM D1465-04 Standard Test Method for Blocking and Picking Points of Petroleum Wax
ASTM D1465-10(2015) Standard Test Method for Blocking and Picking Points of Petroleum Wax
ASTM D93-19 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D5731-02 Standard Test Method for Determination of the Point Load Strength Index of Rock
ASTM D5731-05 Standard Test Method for Determination of the Point Load Strength Index of Rock
ASTM F1661-09(2015) Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM D3828-16a(2021) Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3828-16 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM C1356-96(2001) Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
ASTM D5399-95 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
ASTM D5772-03 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D7397-07 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
ASTM D2887-19e1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D2887-19ae2 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D2887-19ae1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D2887-19 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D2887-19a Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D7236-07 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D6307-16 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
ASTM D2887-14 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D6307-19 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
ASTM D5399-09(2017) Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
ASTM D2887-18 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D5399-09(2023) Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
ASTM D1142-95(2006) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
ASTM A937/A937M-12 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
ASTM A937/A937M-06 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
ASTM E502-21a Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E502-07 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM D92-02 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
ASTM D92-92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
ASTM D7346-14 Standard Test Method for No Flow Point and Pour Point of Petroleum Products
ASTM D1465-10 Standard Test Method for Blocking and Picking Points of Petroleum Wax

British Standards Institution (BSI), two-point calibration

BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS ISO 5628:2019 Tracked Changes. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS ISO 12963:2017 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
BS ISO 12963:2017+A1:2020 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
20/30419851 DC BS ISO 12963 AMD1. Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS ISO 19072-1:2014 Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pocket interface definition
BS ISO 19072-1:2007 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Pocket interface definition
BS EN ISO 3679:2022 Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
BS 4633 and 4634:1970 Method for the determination of crystallizing point. Method for the determination of melting point and/or melting range
BS EN ISO 3679:2015 Determination of flash no-flash and flash point. Rapid equilibrium closed cup method
21/30436773 DC BS ISO 1242. Essential oils. Determination of acid value by two titration methods, manual and automatic
BS 7034-6:1988 Viscosity and viscometric fixed points of glass. Method for the determination of softening point
14/30288711 DC BS EN ISO 1288-3. Glass in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four-point bending)
BS 7034-7:1988 Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
BS ISO 1242:2023 Tracked Changes. Essential oils. Determination of acid value by two titration methods, manual and automatic
22/30441177 DC BS EN ISO 3679. Determination of flash point Method for flash no-flash and flash point by small scale closed cup tester
BS 7034-7:1989 Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
BS EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009)
BS EN 14411:2003 Ceramic tiles - Definitions, classification, characteristics and marking
BS 7034-6:1989 Viscosity and viscometric fixed points of glass. Method for the determination of softening point

International Organization for Standardization (ISO), two-point calibration

ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
ISO 12963:2017/Amd 1:2020 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - Amendment 1: Correction to Formula 5
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 12863:2022 Standard test method for assessing the ignition propensity of cigarettes
ISO 5764:2002 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
ISO 5764:2009|IDF 108:2009 Milk — Determination of freezing point — Thermistor cryoscope method (Reference method)
ISO 5764:2002|IDF 108:2002 Milk — Determination of freezing point — Thermistor cryoscope method (Reference method)
ISO 5764:1987 Milk; Determination of freezing point; Thermistor cryoscope method
ISO 5764:2009 | IDF 108:2009 Milk — Determination of freezing point — Thermistor cryoscope method (Reference method)
ISO 5764:2002 | IDF 108:2002 Milk — Determination of freezing point — Thermistor cryoscope method (Reference method)
ISO 19072-1:2007 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 1: Pocket interface definition
ISO 19072-1:2014 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 1: Pocket interface definition
ISO 3679:2022 Determination of flash point – Method for flash no-flash and flash point by small scale closed cup tester
ISO 2592:2017 Determination of flash and fire points — Cleveland open cup method
ISO 5353:1978 Earth-moving machinery; Seat index point
ISO 1523:2002 Determination of flash point - Closed cup equilibrium method
ISO 2592:2000 Determination of flash and fire points - Cleveland open cup method
ISO 7884-7:1987 Glass; Viscosity and viscometric fixed points; Part 7 : Determination of annealing point and strain point by beam bending
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method

AT-ON, two-point calibration

ONORM ISO 4292:1988 Methodsfor the assessment ofdeparture from roundness; measurement by two- and three-point methods

PT-IPQ, two-point calibration

NP EN 12133-2000 Fruit and vegetables juices Determination of chloride content Potentiometric titration method

国家市场监督管理总局、中国国家标准化管理委员会, two-point calibration

GB/T 38686-2020 Test method for flexibility of ultrathin glass—Two point bending method

未注明发布机构, two-point calibration

BS 3730-3:1982(1999) Assessment of departures from roundness — Part 3 : Methods for determining departures from roundness using two - and three - point measurement
BS 4633 & 04634:1970(2011) Method for The determination of crystallizing point Method for The determination of melting point and / or melting range

RU-GOST R, two-point calibration

GOST R 53734.4.10-2014 Electrostatics. Part 4-10. Test methods for specific application. Two-point resistance measurement
GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST 30562-1997 Milk. Determination of freezing point. Thermistor cryoscope method
GOST R ISO 5764-2011 Milk. Determination of freezing point. Thermistor cryoscope method (reference method)
GOST 25101-1982 Milk. Method for determination of the freezing point
GOST 5903-1989 Confectionery. Methods for determination of sugar
GOST 21553-1976 Plastics. Methods for determination of melting temperature
GOST 32453-2013 Global navigation satellite system. Coordinate systems. Methods of transformations for coordinates of determinated points
GOST 32453-2017 Global navigation satellite system. Coordinate systems. Methods of transformations for determinated points coordinate
GOST 25101-2015 Milk. Method for determination of the freezing point
GOST 28447.6-1990 Textured yarns. Method for determination of appearance and inter-bobbin defects

CZ-CSN, two-point calibration

CSN 50 0358-1988 Paper and paperboard testing. Paper and paperboard stiffness determi- nation byatensometric two points method
CSN 57 0538-1998 Determination of freezing point in milk - cryoscope method
CSN 73 0416-1984 Measuring marks for point stabilization in geodesy

Anhui Provincial Standard of the People's Republic of China, two-point calibration

DB34/T 2716-2016 Functional Marker Method for Identification of Two-line Rice Sterility Gene
DB34/T 3308-2018 Molecular Marker Method for Detecting Purity of Two-line Hybrid Rice Seeds
DB34/T 925-2009 Determination of Smoke Point of Vegetable Oils and Fats by Digital Smoke Point Apparatus

KR-KS, two-point calibration

KS B ISO 4292-2014 Methods for the assessment of departure from roundness — Measurement by two-and three-point methods
KS M 2010-2008(2023) Testing methods for flash point of crude oil and petroleum products —Determination of flash point — Tag closed cup method
KS M ISO 2592-2018(2023) Determination of flash and fire points — Cleveland open cup method
KS M ISO 2592-2018 Determination of flash and fire points — Cleveland open cup method
KS M ISO 2719-2017 Determination of flash point — Pensky-Martens closed cup method

American Welding Society (AWS), two-point calibration

WRC 257:1980 Analysis of the Ultrasonic Examinations of PVRC Weld Specimens 155, 202, and 203 by Standard and Two-Point Coincidence Methods

International Electrotechnical Commission (IEC), two-point calibration

IEC 61340-4-10:2012 Electrostatics - Part 4-10: Standard test methods for specific applications - Two-point resistance measurement

Indonesia Standards, two-point calibration

SNI 03-7041-2004 The placement criteria of non directional beacons (NDB)

Society of Automotive Engineers (SAE), two-point calibration

SAE J1163-2006 Determining Seat Index Point
SAE J1163-2012 Determining Seat Index Point

European Committee for Standardization (CEN), two-point calibration

EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN ISO 5764:2002 Milk - Determination of Freezing Point - Thermistor Cryoscope Method (Reference Method) ISO 5764: 2002
EN ISO 6709:2022 Standard representation of geographic point location by coordinates (ISO 6709:2022)
EN ISO 6709:2009 Standard representation of geographic point location by coordinates (ISO 6709:2008, including Cor 1:2009)

Lithuanian Standards Office , two-point calibration

LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

Japanese Industrial Standards Committee (JISC), two-point calibration

JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS B 8227:2013 Sizing of safety valves for gas/liquid two-phase flow
JIS D 1044:2001 Powered two-wheeled vehicles -- Measurement method of exhaust (tail pipe) gases from spark ignition engines

AENOR, two-point calibration

UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE 48061:1985 DETERMINATION OF FLASHPOINT. CLOSED CUP METHOD

German Institute for Standardization, two-point calibration

DIN 41626-2:1989-10 Special contacts for multi two-part connectors; concentric contacts (type C); dimensions, ratings, requirements, tests
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN 41626-1:1989-10 Special contacts for multi two-part connectors; contacts for high current (type H); dimensions, ratings, requirements, tests
DIN EN ISO 1516 Berichtigung 1:2006 Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002); German version EN ISO 1516:2002, Corrigenda to DIN EN ISO 1516:2002-08
DIN EN ISO 2719:2003 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2002); German version EN ISO 2719:2002
DIN EN ISO 5764:2009-10 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009); German version EN ISO 5764:2009
DIN EN ISO 3679:2023 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022)
DIN EN ISO 1523 Berichtigung 1:2006 Determination of flash point - Closed cup equilibrium method (ISO 1523:2002); German version EN ISO 1523:2002, Corrigenda to DIN EN ISO 1523:2002-08
DIN 49441-2:1989-12 Two-pole plugs with earthing contact rated for 10 A 250 V d.c., 16 A 250 V a.c., splash-proof

Korean Agency for Technology and Standards (KATS), two-point calibration

KS R 1167-2006 Powered two－wheeled vehicles－Measurement method of exhaust(tail pipe) gases from spark ignition engines
KS H ISO 5764:2006 Milk－Determination of freezing point－Thermistor cryoscope method
KS L 2401-2009 Testing method for annealing point and strain point of glass by beam bending
KS L 2401-1999 Testing method for annealing point and strain point of glass by beam bending
KS M 1808-2002 Determination of softening point of pitches-Mettler softening point method
KS L 1616-2012 Test methods of iso-electric point of fine ceramic powders
KS R 1167-2007 Powered two－wheeled vehicles－Measurement method of exhaust(tail pipe) gases from spark ignition engines
KS M ISO 2592:2018 Determination of flash and fire points — Cleveland open cup method
KS M 1808-2017(2022) Determination of softening point of pitches－Mettler softening point method
KS H ISO 5764-2006(2016) Milk－Determination of freezing point－Thermistor cryoscope method
KS M 1067-2005 Determination of hexavalent chromium by colorimetric method/spot test
KS F 2490-2016 Standard test method for asphalt content of hot-mix asphalt by ignition method
KS F 2490-2022 Standard test method for asphalt content of hot-mix asphalt by ignition method
KS F 2490-2016(2021) Standard test method for asphalt content of hot-mix asphalt by ignition method
KS L 2505-2009 Testing method for strain point of glass
KS M 0007-2011 Testing methods for melting point of chemical products
KS M ISO 2719:2003 Determination of flash point－Pensky-Martens closed cup method
KS L 2504-2001 Glass-Viscosity and viscometric fixed points-Part 6:Determination of softening point
KS M ISO 1523:2008 Determination of flash point－Closed cup equilibrium method
KS M ISO 13736-2014(2019) Determination of flash point — Abel closed-cup method
KS L 2505-1999 Testing method for strain point of glass
KS M 0007-1996 Testing methods for melting point of chemical products
KS M 0007-1986 Testing methods for melting point of chemical products
KS M 2053-2004 Testing methods for aniline point and mixed aniline point of petroleum products
KS M ISO 2592:2007 Determination of flash and fire points-Cleveland open cup method
KS M 1808-2017 Determination of softening point of pitches－Mettler softening point method
KS M 2053-1999 Testing methods for aniline point and mixed aniline point of petroleum products
KS M 2053-1985 Testing methods for aniline point and mixed aniline point of petroleum products
KS M 2250-2007 Testing method for softening point of bituminous materials(Ring and ball method)
KS M 2250-1982 Testing method for softening point of bituminous materials(Ring and ball method)
KS L ISO 7884-7:2014 Glass — Viscosity and viscometric fixed points — Part 7: Determination of annealing point and strain point by beam bending

American Society of Civil Engineers (ASCE), two-point calibration

ASCE 21-96-1997 Automated People Mover Standards - Part 1
ASCE 21-00-2002 Automated People Mover Standards - Part 3: Electrical Stations Guideways
ASCE 21-98-1999 Automated People Mover Standards - Part 2: Vehicles Propulsion and Braking

ZA-SANS, two-point calibration

SANS 5550:1993 Potency of antibiotics - Microbiological agar diffusion method of assay (two-point technique)

(U.S.) Telecommunications Industries Association , two-point calibration

TIA TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

Professional Standard - Petrochemical Industry, two-point calibration

SH/T 0244-1992 Determination of boiling point of standard n-heptane and standard isooctane
NB/SH/T 0401-2010 Standard test method for blocking and picking points of petroleum wax
SH/T 0401-1992 Petroleum Wax Stick and Knot Determination
SH/T 0800-2007 Standard test method for dropping point of waxes
SH/T 0247-1992 Diesel freezing point determination method (automatic determination method)
SH/T 0678-1999 Vaseline.Determination of dropping point
SH/T 0179-1992 Determination of cloud point and crystallization point of light petroleum products
SH/T 0733-2004 Test method for flash point by tag closed cup tester
SH/T 0178-1992 Kerosene Combustibility Determination Method (Lighting Method)
SH/T 0132-1992 Determination of Freezing Point of Petroleum Wax
SH/T 0100-1991 Determination of Solidification Point of Petroleum Wax
SH/T 0768-2005 Test method of flash point by continuously closed cup tester

WRC - Welding Research Council, two-point calibration

BULLETIN 257-1980 ANALYSIS OF THE ULTRASONIC EXAMINATIONS OF PVRC WELD SPECIMENS 155@ 202@ AND 203 BY STANDARD AND TWO-POINT COINCIDENCE METHODS

NL-NEN, two-point calibration

NEN 3461-1982 Milk - Determination of the freezing point with a thermistor cryoscope (routine method)
NEN 3460-1982 Milk - Determination of the freezing point with a mercury thermometer (reference method)
NEN 3462-1988 Milk - Determination of the freezing point with a mercury thermometer (reference method)
NEN-ISO 2719:1994 Petroleum products and lubricants. Determination of flash point. Pensky-Martens closed cup method (ISO 2719:1988)

TH-TISI, two-point calibration

TIS 1294-1995 Standard test method for flash point of cutback asphalt with tag open-cup

Professional Standard - Non-ferrous Metal, two-point calibration

YS/T 480-2005 Aluminium cell test for energy balance and its calculation method-Four-point feed current and two-point feed current prebaked anode aluminium cell

Standard Association of Australia （SAA）, two-point calibration

AS 2106.5:2005 Methods for the determination of the flash point of flammable liquids (closed cup) - Determination of flash/no flash - Closed cup equilibrium method
AS 2106.3:2005 Methods for the determination of the flash point of flammable liquids (closed cup) - Determination of flash/no flash - Rapid equilibrium closed cup method
AS 2106.2:2005 Methods for the determination of the flash point of flammable liquids (closed cup) - Determination of flash point - Pensky-Martens closed cup method
AS 2106.6:2005 Methods for the determination of the flash point of flammable liquids (closed cup) - Determination of flash point - Closed cup equilibrium method
AS 2106.4:2005 Methods for the determination of the flash point of flammable liquids (closed cup) - Determination of flash point - Rapid equilibrium closed cup method

VN-TCVN, two-point calibration

TCVN 7085-2011 Milk.Determination of freezing point.Thermistor cryoscope method (Reference method)

Professional Standard - Petroleum, two-point calibration

SY/T 0541-2009 Test method for gel point of crude oils
SY/T 0541-1994 Determination of the freezing point of crude oil
SY/T 7551-2004 crude oil pour point method
SY/T 5345-2007 Test method for two phase relative permeability in rock

Taiwan Provincial Standard of the People's Republic of China, two-point calibration

CNS 2332-1982 Method of Test for Freezing Point of Naphthalene
CNS 14904-2005 Essential oils - General quidance on the determination of flashpoint
CNS 8550-1983 Significance Test of Differencece Between the Two Population Means(Standard Deviations Known, Two - Sided)
CNS 8879-1983 Interval Estimation of the Difference Between Two Population Means(Standard Deviations Known)
CNS 8549-1983 Significance Test of Difference Between the Two Population Means (Standard Deviations, Known, One-Side)
CNS 8746-1983 Significance Test of Difference Between the Two Population Means (Standard Deviations Unknown, Two-Sided)
CNS 8745-1983 Significance Test of Difference Between the Two Population Means(Standard Deviations Unknown, One-Sided)
CNS 8880-1983 Interval Estimation of the Difference Between Two Population Means (Standard Deviations Known)
CNS 3775-1990 Method of Test for Flash and Fire Points by Cleveland Open Cup
CNS 2762-1974 Method of Test for Freezing Points of Benzene
CNS 2485-1965 Determination of Softening Point for Asphalt (Mercury Method)
CNS 2486-1965 Determination of Softening Point for Asphalt (Ring and Ball Method)
CNS 14473-2000 Method of test for flash point by small scale closed tester
CNS 6577-1980 Determination of Freezing Point of Essential Oils
CNS 3574-2001 Method of test for flash point by Pensky-Martens closed cup tester

TR-TSE, two-point calibration

TS 123-1978 STANDARD METHODS OF TEST FOR FLASH AND F?RE POINTS OF PETROLEUM PRODUCTS BY CLEVELAND ?PEN CUP
TS 2396-1976 LEVELLING POINT MONUMENTS AND CONSTRUCT?ON MEDHODS

CH-SNV, two-point calibration

SEV 3030-1963

The American Road & Transportation Builders Association, two-point calibration

AASHTO T48-1999 Standard Method of Test for Flash and Fire Points by Cleveland Open Cup Twentieth Edition
AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method

National Metrological Verification Regulations of the People's Republic of China, two-point calibration

JJG(核工) 10-1991 Verification method for measuring point gamma ray source by standard grade germanium gamma spectrometer
JJG 701-1990 Verification Regulation of Melting-Point-Measuring Instruments with Capillary Method
JJG 463-1996 Verification Regulation of Melting-Point-Measuring Instruments With Thermo-Micro-Method

ES-UNE, two-point calibration

UNE-EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)

ISA - International Society of Automation, two-point calibration

ISA TR67.04.09-2005 Graded Approaches To Setpoint Determination

American National Standards Institute （ANSI), two-point calibration

ANSI/AISI S230 Supplement 2-2008 Supplement 2 to the Standard for Cold-Formed Steel Framing - Prescriptive Method for One and Two Family Dwellings
ANSI/AISI S230 Supplement 1-2008 Supplement 1 to the Standard for Cold-Formed Steel Framing - Prescriptive Method for One and Two Family Dwellings
ANSI/AISI S230 S 3-2012 Supplement 3 to Standard for Cold-Formed Steel Framing - Prescriptive Method for One and Two Family Dwellings, 2007 Edition

HU-MSZT, two-point calibration

MSZ KGST 1695-1979

(U.S.) Ford Automotive Standards, two-point calibration

FORD FLTM BO 021-02-2001 MELTING POINT DETERMINATION OF PLASTICS FISHER-JOHNS METHOD
FORD FLTM BO 021-2-2001 MELTING POINT DETERMINATION OF PLASTICS FISHER-JOHNS METHOD

YU-JUS, two-point calibration

JUS H.B8.045-1984 Determination of crystallizingpoint. General method
JUS B.H8.613-1980 Testing of bitumen Softening point ring and ball

IN-BIS, two-point calibration

IS 5813-1970

Professional Standard - Agriculture, two-point calibration

GB 1602-1979 Method for Determination of Melting Point of Pesticides
93药典四部-2015 0600 Determination of physical constants 0613 Determination of freezing point
92药典四部-2015 0600 Determination of physical constants 0612 Determination of melting point
74药典四部-2020 0600 Determination of physical constants 0613 Determination of freezing point
73药典四部-2020 0600 Determination of physical constants 0612 Determination of melting point
GB 5174-1985 Determination of Cationic Actives in Detergents by Direct Two-Phase Titration
282药典三部-2020 Bioassay 3402 Immunospot Assay
1773药典一部-2010 APPENDIX VII D CONCLUDE POINT METHOD
1772药典一部-2010 Appendix VII C Melting point determination method
2315药典二部-2010 Appendix ⅥD Determination of freezing point
2314药典二部-2010 Appendix VI C Melting Point Determination Method
238药典四部-2015 3400 Bioassay 3402 Immunospot method
231药典四部-2020 3400 Bioassay 3402 Immunospot method
SN/T 3402-2012 DNA Analysis Method for Authenticity and Purity Identification of Two-line Rice Varieties

GM Daewoo, two-point calibration

GMKOREA EDS-T-7696-2011

ES-AENOR, two-point calibration

UNE 70-106-1986

Professional Standard - Energy, two-point calibration

NB/SH/T 0179-2013 Determination of cloud point and crystallizing point for light petroleum products

BE-NBN, two-point calibration

NBN T 63-127-1980 Surface active agents - Detergents -Dermination of cationic-active matter - Direct two-phase titration

AASHTO - American Association of State Highway and Transportation Officials, two-point calibration

T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2018 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture
T 272-2016 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture

国家能源局, two-point calibration

NB/T 10037-2017 Unsteady-state determination method of coalbed methane-water two-phase relative permeability