ZH
RU
ES
plasticizer required
plasticizer required, Total:499 items.
In the international standard classification, plasticizer required involves: Raw materials for rubber and plastics, Organic chemicals, Plastics, Construction materials, Insulating materials, Fuels, Petroleum products in general, Adhesives, Agricultural machines, implements and equipment, Paint ingredients, Products of the chemical industry, Rubber and plastics products, Ladders, Reinforced plastics, Analytical chemistry, Welding, brazing and soldering, Fertilizers, Vocabularies, Elements of buildings, Pipeline components and pipelines, Shipbuilding and marine structures in general, Geology. Meteorology. Hydrology, Leather technology, Small craft, Domestic safety, Inks. Printing inks, Non-textile floor coverings, Natural gas, Paints and varnishes, Structures of buildings, Environmental protection, Medical equipment, Production in the chemical industry, Farming and forestry, Processes of the textile industry, Equipment for the rubber and plastics industries, Equipment for entertainment, Installations in buildings, Air quality, Road vehicle systems, Materials for aerospace construction, Protection against crime, Mobile services, Miscellaneous domestic and commercial equipment, Inorganic chemicals, Hospital equipment, Chipless working equipment.
RO-ASRO, plasticizer required
German Institute for Standardization, plasticizer required
- DIN 53400:1988-06 Testing of plasticizers; determination of physical and chemical characteristics of plasticizers
- DIN 53400:1988 Testing of plasticizers; determination of physical and chemical characteristics of plasticizers
- DIN 55477:1990 Packaging; non-reinforced and reinforced plastic tapes; requirements and testing
- DIN EN ISO 177:1999 Plastics - Determination of migration of plasticizers (ISO 177:1988); German version EN ISO 177:1999
- DIN EN ISO 177:2017-05 Plastics - Determination of migration of plasticizers (ISO 177:2016); German version EN ISO 177:2017
- DIN 1187:1982 Unplasticized polyvinyl chloride (PVC-U) drainpipes; Dimesions, requirements, testing
- DIN EN 13677-3:2003-07 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements; German version EN 13677-3:2003
- DIN EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005); German version EN ISO 176:2005
- DIN EN ISO 1043-3:2000 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:1996); German version EN ISO 1043-3:1999
- DIN EN ISO 1043-3:2017-03 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016); German version EN ISO 1043-3:2016
- DIN 8061:1994 Unplasticized polyvinyl chloride pipes - General quality requirements and testing
- DIN EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements; German version EN 13677-3:2003
- DIN EN ISO 176:2005-05 Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005); German version EN ISO 176:2005
- DIN 16938:1986 Plasticized polyvinyl chloride (PVC-P) waterproofing sheet incompatible with bitumen; requirements
- DIN EN 13677-2:2003-07 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements; German version EN 13677-2:2003
- DIN 54802-2:2015-07 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 2: Statical method
- DIN 8061:2009 Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements and testing
- DIN 8061:2016 Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing; Text in German and English
- DIN 8061:2016-05 Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing; Text in German and English
- DIN 1187:1982-11 Unplasticized polyvinyl chloride (PVC-U) drainpipes; Dimesions, requirements, testing
- DIN 54802-1:2015-07 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 1: Planetary mixer method
- DIN 16734:1986 Man-made fibre reinforced plasticized polyvinyl chloride (PVC-P) roofing felt incompatible with bitumen; requirements
- DIN 16730:1986 Plasticized polyvinyl chloride (PVC-P) roofing felt incompatible with bitumen; requirements
- DIN EN 16245-2:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers; German version EN 16245-2:2013
- DIN EN 14598-3:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements; German version EN 14598-3:2005
- DIN EN 607:2005 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing; German version EN 607:2004
- DIN 16937:1986 Plasticized polyvinyl chloride (PVC-P) waterproofing sheet compatible with bitumen; requirements
- DIN 53774-2:1986 Testing of colouring materials in plastics; testing of colouring materials in unplasticized polyvinyl chloride moulding compounds; preparation of specimens
- DIN 53408:1967-06 Testing of Plastics; Determination of Solubility Temperature of Polyvinyl Chloride (PVC) in Plasticizers
- DIN EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements; German version EN 13677-2:2003
- DIN EN 665:1995-01 Resilient floor coverings - Determination of exudation of plasticizers; German version EN 665:1994
- DIN EN 13706-3:2003-02 Reinforced plastic composites - Specifications for pultruded profiles - Part 3: Specific requirements; German version EN 13706-3:2002
- DIN EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016); German version EN ISO 177:2017
- DIN EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements; German version EN 14598-3:2005
- DIN EN 13706-3:2003 Reinforced plastic composites - Specifications for pultruded profiles - Part 3: Specific requirements; German version EN 13706-3:2002
- DIN 16735:1986 Plasticized polyvinyl chloride (PVC-P) roofing felt with non-woven roving inner layer; requirements
- DIN 53408:1967 Testing of Plastics; Determination of Solubility Temperature of Polyvinyl Chloride (PVC) in Plasticizers
- DIN 16456-2:2017-10 Plastic sheet piling - Extruded sheet piling of plasticizerfree polyvinylchloride (PVC-U) - Part 2: Dimensions
- DIN 16456-1:2017-10 Plastic sheet piling - Extruded sheet piling of plasticizerfree polyvinylchloride (PVC-U) - Part 1: Product
- DIN EN 14598-2:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements; German version EN 14598-2:2005
- DIN 55625-4:1999-04 Extenders for plastics - Part 4: Whiting, specifications and methods of test
- DIN EN 12608:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods; German version EN 12608:2003
- DIN EN 16245-1:2013-07 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements; German version EN 16245-1:2013
- DIN 55625-23:1999-12 Extenders for plastics - Part 23: Phlogopite; specifications and methods of test
- DIN 55625-7:1999-04 Extenders for plastics - Part 7: Dolomite, specifications and methods of test
- DIN 53774-5:1986 Testing of colouring materials in plastics; testing of colouring materials in unplasticized polyvinyl chloride moulding compounds; determination of thermal stability in the long-term milling test
- DIN EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers; German version EN 16245-2:2013
- DIN EN 14598-2:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements; German version EN 14598-2:2005
- DIN 55625-24:1999-12 Extenders for plastics - Part 24: Magnesium hydroxide; specifications and methods of test
- DIN EN ISO/ASTM 52920:2021-08 Additive manufacturing - Qualification principles - Requirements for industrial additive manufacturing sites (ISO/ASTM DIS 52920:2021); German and English version prEN ISO/ASTM 52920:2021 / Note: Date of issue 2021-07-23
- DIN 26057:2016-04 Spiralled hoses made of thermoplastic polyurethan (TPU) with steel wire reinforcement for granulated and powdered materials - Requirements
- DIN EN 13706-2:2003-02 Reinforced plastic composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements; German version EN 13706-2:2002
- DIN EN 14469-4:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials; German version EN 14469-4:2004
- DIN EN 301:2023-05 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements; German version EN 301:2023
- DIN EN 301:2023 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
- DIN EN ISO 1043-3:2017 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016); German version EN ISO 1043-3:2016
- DIN EN 422:2009-10 Plastics and rubber machines - Blow moulding machines - Safety requirements; German version EN 422:2009 / Note: DIN EN 422 (1995-06) remains valid alongside this standard until 2009-12-28.
YU-JUS, plasticizer required
RU-GOST R, plasticizer required
- GOST 8728-1988 Plasticizers. Specifications
- GOST 14926-1981 Plastics. Method for determination of plasticizers migration
- GOST 28020-1989 Adhesive tape for electrical insulation. Requirements for plastified polyvinylchloride tapes with thermoplastic adhesive
- GOST 16971-1971 Welded joints of Plasticized VPC, unplasticized VPC and polyethulene. Qualitu control methods. Total requirements
- GOST 18522-1993 Liquid resins and plasticizers. Methods for determination of colour
- GOST 18522-1973 Liquid resins and plasticizers. Methods for determination of the colourity
- GOST R 50407-1992 Liquid resins and plasticizers. Method for determination of colourity
- GOST 28023-1989 Adhesive tape for electrical insulation. Requirements for crepped paper tapes with thermosetting adhesive
- GOST R 50108-1992 Plastics. Polyvinylchloride resins for general use. Determination of hot plasticizer absorption
- GOST 18329-2014 Liquid resins and plasticizers. Methods for determination of density
- GOST 18329-1973 Liqwid resins and plasticizers. Methods for determination of density
- GOST 28022-1989 Adhesive tape for electrical insulation. Requirements for polyester tapes with thermoplastic adhesive
- GOST 25265-1991 Plastics. PVC resins for general use. Determination of plasticizer absorption at room temperature
- GOST 11279.3-1983 Organic dyes. Testing method of colour fastness to adhesives and plastificators
- GOST R 57999-2017 Adhesives for load-bearing timber structures. Phenolic and aminoplastic. Classification and performance requirements
- GOST 28025-1989 Adhesive tape for electrical insulation. Requirements for polycarbonate tapes with thermoplastic adhesive
- GOST R 57863-2017 Polymer composites. Reinforced thermoplastic sheets. General technical requirements and test methods
- GOST 12015-1966 Plastics. Preparation of test specimens from thermosetts. General requirements
British Standards Institution (BSI), plasticizer required
- BS 573, 574, 1995, 1996, 2535, 2536, 3647:1973 Specifications for plasticizer esters
- BS EN ISO 177:2000 Plastics - Determination of migration of plasticizers
- BS EN ISO 177:1990 Plastics - Determination of migration of plasticizers
- BS EN ISO 1043-3:1999 Plastics - Symbols and abbreviated terms - Plasticizers
- BS EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Specific requirements
- BS 4835:1973 Methods of test for plasticizer esters
- BS EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method
- BS EN ISO 177:2017 Tracked Changes. Plastics. Determination of migration of plasticizers
- BS EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Methods of test and general requirements
- BS EN ISO 1043-3:2016 Tracked Changes. Plastics. Symbols and abbreviated terms. Plasticizers
- BS EN 13706-3:2002 Reinforced plastics composites - Specifications for pultruded profiles - Specific requirements
- BS EN 16245-2:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for resin, curing systems, additives and modifiers
- BS EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) - Specific requirements
- BS ISO 4574:2019 Plastics. PVC resins for general use. Determination of hot plasticizer absorption
- BS 4549-1:1997 Guide to quality control requirements for reinforced plastics mouldings - Guide to the preparation of a scheme to control the quality of glass reinforced polyester mouldings
- BS EN 13706-2:2002 Reinforced plastics composites - Specifications for pultruded profiles - Method of test and general requirements
- BS EN 16245-1:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. General requirements
- BS EN ISO 13734:1998 Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods
- BS EN ISO 13734:2013 Natural gas. Organic components used as odorants. Requirements and test methods
- BS EN ISO/ASTM 52901:2018 Additive manufacturing. General principles. Requirements for purchased AM parts
- BS EN 12608:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods
- BS EN 16245-3:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fibre
- BS EN 16245-4:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fabrics
- BS EN 14469-4:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Determination of bleeding of colouring materials
- BS EN ISO 9454-2:2001 Soft soldering fluxes - Classification and requirements - Performance requirements
- BS EN 14469-2:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Preparation of test specimens
- BS ISO 16000-31:2014 Indoor air. Measurement of flame retardants and plasticizers based on organophosphorus compounds. Phosphoric acid ester
- BS 5409-2:1978 Specification for nylon tubing - Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry
- BS EN ISO/ASTM 52920:2023 Additive manufacturing. Qualification principles. Requirements for industrial additive manufacturing processes and production sites
- BS EN 14598-2:2005 Reinforced thermosetting moulding compounds - Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) - Methods of test and general requirements
- BS EN 14598-2:2005(2006) Reinforced thermosetting moulding compounds - Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) - Methods of test and general requirements
- BS ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement. General
- BS EN 16245-5:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for core materials
- BS EN 301:2013 Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
- BS EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
- BS EN ISO 20430:2020 Plastics and rubber machines. Injection moulding machines. Safety requirements
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plasticizer required
- GB/T 24802-2009 Rubber plasticizer A
- GB/T 1658-1982 Determination of ash of plasticizers
- GB 1666-1988 Plasticizers--Determination of density
- GB/T 1676-2008 Determination the iodine value of plasticizers
- GB/T 1676-1981 Determinating the iodine value of plasticizers
- GB/T 1670-2008 Plasticizers-test method of heat-resistance
- GB/T 1677-2008 Determination the epoxy value of plasticizers
- GB/T 1663-2001 Plasticizers-Determination of crytallizing point
- GB/T 1670-1988 Plasticizers--Test method of heat-resistance
- GB/T 1660-2008 Determinating the kincmatic viscosity of plasticizers
- GB/T 1664-1995 Plasticizers--Determination of colour
- GB/T 1669-2001 Plasticizers-Determination of mass loss on heating
- GB/T 1844.3-2022 Plastics—Symbols and abbreviated terms—Part 3:Plasticizers
- GB/T 1844.3-2008 Plastics.Symbols and abbrebiated terms.Part 3:Plasticizers
- GB/T 33322-2016 Rubber plasticizer.Aromatic base mineral oil
- GB/T 1659-1982 Determination of water content of plasticizers by turbidimetry
- GB/T 1668-1995 Plasticizers--Determination of acid value and acidity
- GB/T 1668-2008 Plasticizers.Determination of acid value and acidity
- GB/T 1844.3-1995 Symbols of plastics and resins--Part 3: Plasticizers
- GB/T 1672-1988 Liquid plasticizers--Determination of volume resistivity
- GB/T 1665-1995 Plasticizers--Determination of saponification value and ester-content
- GB/T 1665-2008 Plasticizers.Determination of saponification value and ester-content
- GB/T 1661-1982 Measuring method for kinematic viscosity of plasticizers(Engler method)
- GB/T 1660-1982 Measuring method for kinematic viscosity of plasticizers(Pinkevitch method)
- GB/T 1677-1981 Determination of the epoxy value of plasticizers(acetone-hydrochloride method)
- GB/T 1678-1981 Determination of the epoxy value of plasticizers(pyridine-hydrochloride method)
- GB/T 22931-2008 Leather and fur.Chemical tests.Determination of plasticizers
- GB/T 23653-2009 Plastics.PVC resins for general use.Determination of hot plasticizer absorption
- GB/T 1671-2008 Plasticizers.Determination of flash point.Clevelabd open cup method
- GB/T 31851-2015 Test method for alkane plasticizer in structural silicone sealants
- GB/T 1671-1988 Plasticizers--Determination of flash point--Cleveland open cup method
- GB/T 41508-2022 Additive manufacturing—General principles—Requirements for purchased AM parts
- GB/T 22048-2008 Toys and children's products-Determination of phthalate plasticizers in polyvinyl chloride plastic
- GB/T 3400-2002 Plastics--Homopolymer and copolymer resins of vinyl chloride for general use--Determination of plasticizer absorption at room temperature
CZ-CSN, plasticizer required
CO-ICONTEC, plasticizer required
Korean Agency for Technology and Standards (KATS), plasticizer required
- KS M ISO 177:2003 Plastics-Determination of migration of plasticizers
- KS M ISO 177:2018 Plastics — Determination of migration of plasticizers
- KS M ISO 1043-3:2003 Plastics-Symbols and abbreviated terms-Part 3 : Plasticizers
- KS M ISO 1043-3:2018 Plastics — Symbols and abbreviated terms — Part 3: Plasticizers
- KS M 3083-2004 Testing method for chemical resistance of fiber reinforced plastics
- KS P ISO 8185:2009 Humidifiers for medical use -- General requirements for humidification systems
- KS K 0738-2007(2012) Test method for plasticizer mixtures of polyvinyl chloride coated fabrics
- KS K 0738-2013 Test method for plasticizer mixtures of polyvinyl chloride coated fabrics
- KS K 0148-2010 Test method for plasticizer mixtures from vinyl chloride coated on the fabrics
- KS K 0148-2004 Test method for plasticizer mixtures from vinyl chloride coated on the fabrics
SE-SIS, plasticizer required
- SIS 16 17 07-1970 Plastics. Determination of migration of plasticizers
- SIS 16 17 03-1970 Plastics. Determination of the loss of plasticizers bv activated carbon
- SIS SS-ISO 176:1988 Plastics — Determination of loss of plastici- zers — Activated carbon method
- SIS SS 404 09 77-1988 Insulating materials — Specifications for pressure-sensitive adhesive tapes for electrical purposes — Requirements forplasticizedpolyvinylchloride with non-thermosetting adhesive
- SIS 23 28 11-1964 Wood mouldings. Quality requirements
- SIS SS 13 41 10-1978 Binders for mortar — Requirements
Professional Standard - Chemical Industry, plasticizer required
- HG/T 4454-2012 Plastics.Determination of migration of plasticizers
- HG/T 4386-2012 Plasticizer epoxidized soybean oil
- HG/T 4615-2014 Plasticizer.Tri-n-butyl citrate
- HG/T 4453-2012 Plastics.Technical control code for the use of plasticizers
- HG/T 4615-2023 Plasticizer Tributyl Citrate (TBC)
- HG/T 4455-2012 Plastics.Determination of loss of plasticizers.Hot air method
- HG/T 4458-2012 Plastics.Determination of loss of plasticizers.Activated carbon method
- HG/T 4616-2014 Plasticizer.Acetyl tributyl citrate
- HG/T 5085-2016 Rubber plasticizer.Naphthene base mineral oil
- HG/T 4456-2012 Plastics.Determination of exudation of plasticizers under compression
- HG/T 4457-2012 Plastics.Determination of exudation of plasticizers under humid condition
- HG/T 4616-2023 Plasticizer acetyl tributyl citrate (ATBC)
- HG/T 4459-2012 Plastics.Determination of extraction of plasticizers in liquid medium
- HG/T 3027-1988(1997) Determination of plasticizer content in polymethylmethacrylate-Ultraviolet spectrometry method
- HG/T 3027-1988 Determination of plasticizer content in polymethylmethacrylate-Ultraviolet spectrometry method
- HG/T 4769.1~4769.4-2014 Test of colorants in pigment and extender plasticized polyvinyl chloride (2014)
International Organization for Standardization (ISO), plasticizer required
- ISO 177:1976 Plastics — Determination of migration of plasticizers
- ISO 177:2016 Plastics - Determination of migration of plasticizers
- ISO 1043-3:1988 Plastics; symbols; part 3: plasticizers
- ISO 177:1988 Plastics; determination of migration of plasticizers
- ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method
- ISO 176:1976 Plastics; Determination of loss of plasticizers; Activated carbon method
- ISO 1043-3:1996 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers
- ISO 1043-3:2016 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers
- ISO 4574:2019 Plastics — PVC resins for general use — Determination of hot plasticizer absorption
- ISO 4608:1977 Plastics — PVC resins for general use — Determination of plasticizer absorption at room temperature
- ISO/CD 11671:2023 Fiber reinforced plastics-a fishing rod type telescopic ladder-requirements and test methods
- ISO 4574:1978 Plastics; PVC resins for general use; Determination of hot plasticizer absorption
- ISO 3473:1977 Unplasticized polyvinyl chloride (PVC) pipes; Effect of sulphuric acid; Requirement and test method
- ISO 8185:1988 Humidifiers for medical use; safety requirements
- ISO 20430:2020 Plastics and rubber machines — Injection moulding machines — Safety requirements
KR-KS, plasticizer required
Professional Standard - Construction Industry, plasticizer required
PL-PKN, plasticizer required
- PN C89401-1988 Plasticizers Methods of test
- PRS 16-1962
- PN C89087-1986 Plasties Determination of loss of plasticizers by the activated carbon method
- PN B06243-1990 Admixtures for concrete Plasticizing and superplasticizing admixtures Requirements and testing at influence for concrete
- PN C04404-14-1986 Pigments for paints General testing methods Determination of fastness on organie solvents plasticizers and oil
Group Standards of the People's Republic of China, plasticizer required
- T/ZJBMQA 017-2020 Plasticizer for dry-mixed mortar
- T/CJJ 02-2019 Technical requirements for the manufacture of glass fiber reinforced plastic fishing vessel cap profiles
- T/AQSPMK 0009-2023 Colorants for plastic products manufacturing industry — Evaluation requirements for green factories
- T/CNLIC 0086-2023 Colorants for plastic products manufacturing industry— Evaluation requirements for green factories
- T/ZGM 006-2022 Assessment requirements for quality grading and forerunner - Fiber reinforced plastic membrane housings
- T/AQSPMK 0011-2023 Technical specification for green-design product assessment — Plasticizer for artificial leather
- T/CIET 108-2023 Green Design Product Evaluation Technical Specification for Environmentally Friendly Plasticizers
- T/CNLIC 0088-2023 Technical specification for green-design product assessment— Plasticizer for artificial leather
Shandong Provincial Standard of the People's Republic of China, plasticizer required
Hunan Provincial Standard of the People's Republic of China, plasticizer required
TR-TSE, plasticizer required
- TS 984-1971 PLASTICS DETERMINATION OF MIGRATION OF PLASTICIZERS
- TS 983-1979 PLASTICS — DETERMINATION OF LOSS OF PLASTICIZERS ACT?VATED CARBON METHOD
- TS 3437-1979 PLASTICS - PVC RESINS FOR GENERAL USE DETERMINATION OF HOT PLASTICIZER ABSORPTION
- TS 2159-1975 PLASTICIZER ESTERS (PHTHALATE AND SEBACATE ESTERS)
Association Francaise de Normalisation, plasticizer required
- NF T51-025:1963 PLASTICS. DETERMINATION OF THE MIGRATION OF PLASTICIZERS.
- NF T50-050-3:1989 PLASTICS. SYMBOLS. PART 3 : PLASTICIZERS.
- NF T51-025*NF EN ISO 177:2017 Plastics - Determination of migration of plasticizers
- NF EN ISO 177:2017 Plastiques - Détermination de la migration des plastifiants
- NF T51-025:1999 Plastics. Determination of migration of plasticizers.
- NF T51-167*NF EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method
- NF T50-050-3*NF EN ISO 1043-3:2016 Plastics - Symbols and abbreviated terms - Part 3 : plasticizers
- NF EN ISO 1043-3:2016 Plastiques - Symboles et termes abrégés - Partie 3 : plastifiants
- NF EN ISO 176:2005 Matières plastiques - Détermination des pertes en plastifiants - Méthodes au charbon actif
- NF T50-050-3:1999 Plastics. Symbols and abbreviated terms. Part 3 : plasticizers.
- NF EN 13677-3:2003 Préimprégnés renforcés thermoplastiques - Spécifications des GMT - Partie 3 : exigences particulières
- NF P62-118*NF EN 665:1995 Resilient floor coverings. Determination of exudation of plasticizers.
- NF EN 16245-2:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 2 : exigences particulières pour les résines, les systèmes de polymérisation, les additifs et les modificateurs
- NF T45-014:1976 Raw materials for the rubber industry. Petroleum plastifiers. Test methods.
- NF T57-120-2*NF EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2 : specific requirements for resin, curing systems, additives and modifiers
- NF EN 665:1995 Revêtements de sol résilients - Détermination de l'exsudation de plastifiants
- NF T57-540-3*NF EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3 : specific requirements.
- NF EN 13706-3:2003 Composites en plastique renforcé - Spécification des profilés pultrudés - Partie 3 : exigences particulières
- NF T54-095:1985 Adhesive with solvents for assembly of unplasticized PVC pipe elements. Characterization. Basic test methods.
- NF EN 14598-3:2005 Mélanges à mouler thermodurcissables renforcés - Spécification pour mats préiprégnés (SMC) et mélanges à mouler en masse (BMC) - Partie 3 : exigences spécifiques
- NF T57-531-3*NF EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3 : specific requirements
- NF EN 14469-2:2004 Pigments et matières de charge - Essai des matières colorantes dans le chlorure de polyvinyle plastifié (PVC-P) - Partie 2 : préparation des éprouvettes
- NF T54-096:1985 Adhesives with solvents for assembly of unplasticized PVC pipe elements. Suitability for use.
- NF T57-800-3*NF EN 13706-3:2003 Reinforced plastics composites - Specifications for pultruded profiles - Part 3 : specific requirements
- NF EN 13677-2:2003 Préimprégnés renforcés thermoplastiques - Spécifications des GMT - Partie 2 : méthodes d'essai et exigences générales
- NF T45-012:1973 Raw materials for the elastomer industry. Petroleum plasticisers. Determination of density-viscosity.
- NF EN 50497:2008 Méthode d'essai recommandée pour l'évaluation du risque d'exsudation de plastifiant des gaines des câbles et des isolants en PVC
- NF P24-506:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods.
- NF EN 16245-1:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 1 : exigences générales
- NF T57-120-1*NF EN 16245-1:2013 Fibre-reinforced plastic composites -Declaration of raw material characteristics - Part 1: general requirements
- NF E63-609-4/IN1:2008 Plastics and rubber machines - Size reduction machines - Part 4 : safety requirements for agglomerators.
- NF E63-609-4:2008 Plastics and rubber machines - Size reduction machines - Part 4 : safety requirements for agglomerators.
- NF EN 14469-1:2004 Pigments et matières de charge - Essai des matières colorantes dans le chlorure de polyvinyle plastifié (PVC-P) - Partie 1 : composition et préparation des mélanges de base
- NF T45-011:1973 Raw materials for the elastomer industry. Petroleum plasticisers. Determination of the refraction constituent. Density.
- NF T57-531-2*NF EN 14598-2:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2 : methods of test and general requirements
- NF T57-540-2*NF EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2 : methods of test and general requirements
- NF EN 13706-2:2003 Composites en plastique renforcé - Spécification pour les profilés pultrudés - Partie 2 : méthodes d'essai et exigences générales
- NF EN 14469-3:2004 Pigment et matières de charge - Essai des matières colorantes dans le chlorure de polyvinyle plastifié (PVC-P) - Partie 3 : détermination du pouvoir colorant relatif des pigments blancs
- NF EN ISO 7088:2005 Mélanges à mouler thermodurcissables renforcés - Spécification pour mats préimprégnés (SMC) et mélanges à mouler en masse (BMC) - Partie 2 : méthodes d'essai et exigences générales
- NF EN 14598-2:2005 Mélanges à mouler thermodurcissables renforcés - Spécification pour mats préimprégnés (SMC) et mélanges à mouler en masse (BMC) - Partie 2 : méthodes d'essai et exigences générales
- NF EN 50107-2:2005 Mélanges à mouler thermodurcissables renforcés - Spécification pour mats préimprégnés (SMC) et mélanges à mouler en masse (BMC) - Partie 2 : méthodes d'essai et exigences générales
- NF E63-600*NF EN 201:2009 Plastics and rubber machines - Injection moulding machines - Safety requirements.
- NF E63-600*NF EN ISO 20430:2020 Plastics and rubber machines - Injection moulding machines - Safety requirements
- NF EN 422:2009 Machines pour les matières plastiques et le caoutchouc - Machines de moulage par soufflage - Prescriptions de sécurité
ES-AENOR, plasticizer required
European Committee for Standardization (CEN), plasticizer required
- EN ISO 177:1999 Plastics - Determination of Migration of Plasticizers
- EN ISO 176:1999 Plastics - Determination of Loss of Plasticizers - Activated Carbon Method ISO 176: 1976
- EN ISO 177:2017 Plastics - Determination of migration of plasticizers
- EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method
- prEN 665-1992 Resilient floorcoverings; determination of exudation of plasticizers
- EN ISO 1043-3:2016 Plastics - Symbols and Abbreviated Terms - Part 3: Plasticizers
- EN ISO 1043-3:1999 Plastics - Symbols and Abbreviated Terms - Part 3: Plasticizers ISO 1043-3:1996
- EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin@ curing systems@ additives and modifiers
- EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
- EN 607:2004 Eaves Gutters and Fittings Made of PVC-U - Definitions@ Requirements and Testing
- EN 607:1995 Eaves Gutters and Fittings Made of PVC-U - Definitions, Requirements and Testing
- EN ISO 13734:2000 Natural Gas - Organic Sulfur Compounds Used as Odorants - Requirements and Test Methods
- EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
- EN 12608:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods
- EN 16245-1:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
- EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
- EN ISO 20430:2020 Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020)
- EN 301:2023 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
Danish Standards Foundation, plasticizer required
- DS/EN ISO 177:1999 Plastics - Determination of migration of plasticizers
- DS/EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
- DS/EN ISO 1043-3:1999 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers
- DS/EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method
- DS/EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
- DS/EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
- DS/EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
- DS/EN 665:1994 Resilient floor coverings - Determination of exudation of plasticizers
- DS/EN 665:1995 Resilient floor coverings - Determination of exudation of plasticizers
- DS/EN 13706-3:2003 Reinforced plastics composites - Specifications for pultruded profiles - Part 3: Specific requirements
- DS/ISO 8185:1989 Humidifiers for medical use. Vaporizers and nebulizers. Safety requirements
- DS/EN 14598-2/AC:2006 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
- DS/EN 14598-2:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
- DS/EN 12608:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods
- DS/EN 16245-1:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
- DS/EN 13706-2:2003 Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements
- DS/EN 301:1994 Adhesives, phenolic and aminoplastic, for load-bearing timber structures: Classification and performance requirements
- DS/EN ISO 4608:1999 Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature
- DS/EN 201:2009 Plastics and rubber machines - Injection moulding machines - Safety requirements
- DS/EN 422:2009 Plastics and rubber machines - Blow moulding machines - Safety requirements
American National Standards Institute （ANSI), plasticizer required
Society of Automotive Engineers (SAE), plasticizer required
- SAE AS5502E-2022 Standard Requirements for Aerospace Sealants and Adhesion Promoters
- SAE J1525-1985 Lap Shear Test for Automotive Type Adhesives for Fiber reinforced plastic (FRP) Bonding
SAE - SAE International, plasticizer required
- SAE AS5502D-2016 Standard Requirements for Aerospace Sealants and Adhesion Promoters
- SAE J3143-2019 Non-Metallic@ Non-Reinforced Automotive Air-Conditioning Refrigerant Line Assembly Requirements
- SAE J1525-2017 Lap Shear Test for Automotive Type Adhesives for Fiber reinforced plastic (FRP) Bonding
- SAE J1525-2021 Lap Shear Test for Automotive Type Adhesives for Fiber reinforced plastic (FRP) Bonding
未注明发布机构, plasticizer required
- BS 4835:1973(2011) Methods of test for Plasticizer esters
- DIN EN 1401-1:1998 Plastic piping systems for underground non-pressure sewers and pipes – plasticizer-free polyvinyl chloride (PVC-U) – Part 1: Requirements for pipes, fittings and the piping system
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, plasticizer required
- GB/T 34329-2017 General requirements of fiber reinforced plastics pressure vessel
IT-UNI, plasticizer required
Lithuanian Standards Office , plasticizer required
- LST EN ISO 177:2000 Plastics - Determination of migration of plasticizers (ISO 177:1988)
- LST EN 13677-3-2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
- LST EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005)
- LST EN 13677-2-2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
- LST EN ISO 1043-3:2000 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:1996)
- LST EN 14598-3-2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
- LST EN 665-2002 Resilient floor coverings - Determination of exudation of plasticizers
- LST EN 13706-3-2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 3: Specific requirements
- LST EN 14598-2-2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
- LST EN 14598-2-2005/AC-2006 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
- LST EN 12608-2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods
- LST 1604-2000 Repellents. Technical requirements
- LST EN 13706-2-2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements
- LST EN 301-2006 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
- LST EN 422-2009 Plastics and rubber machines - Blow moulding machines - Safety requirements
- LST EN 201-2010 Plastics and rubber machines - Injection moulding machines - Safety requirements
NL-NEN, plasticizer required
- NEN 7106-1984 Plastics pipelines for the transport of drinking water - Adhesives for joints up till 90 mm of unplasticized PVC and PVC/CPE - Requirements and test methods
- Aanv.NEN 3664-1991 Supplement to NEN 3664 Unplasticized PVC window frames, windows and doors to be placed in facade openings Requirements and test methods
- NEN 7011-1988 Gutters and accessories made of unplasticized PVC (PVC-U) and accessory brackets Requirements and test methods
American Society for Testing and Materials (ASTM), plasticizer required
- ASTM D1992-91(2006) Standard Guide for Testing Synthetic Plasticizers Used in Rubber
- ASTM D1992-91(2001) Standard Guide for Testing Synthetic Plasticizers Used in Rubber
- ASTM D1992-91(1997) Standard Guide for Testing Synthetic Plasticizers Used in Rubber
- ASTM D1045-95 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D1045-95(2001) Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D1045-08 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D1045-14 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D3291-97(2003) Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
- ASTM D3291-11(2016)e1 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
- ASTM D1045-19 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D1992-91(2012) Standard Guide for Testing Synthetic Plasticizers Used in Rubber
- ASTM D1992-17(2022) Standard Guide for Testing Synthetic Plasticizers Used in Rubber
- ASTM D1992-91(2013) Standard Guide for Testing Synthetic Plasticizers Used in Rubber
- ASTM D3291-97 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
- ASTM D3291-22 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
- ASTM D2288-97 Standard Test Method for Weight Loss of Plasticizers on Heating
- ASTM D228-08 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
- ASTM D2288-97(2001) Standard Test Method for Weight Loss of Plasticizers on Heating
- ASTM D1992-17 Standard Guide for Testing Synthetic Plasticizers Used in Rubber
- ASTM C772-03(2019) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
- ASTM C772-03(2014) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
- ASTM C772-97 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
- ASTM D3465-21 Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography
- ASTM C772-03 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
- ASTM C772-03(2009) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
GM North America, plasticizer required
VN-TCVN, plasticizer required
- TCVN 5824-2008 Plastics.Determination of loss of plasticizers.Activated carbon method
- TCVN 6037-1995 Unplasticized polyvinyl chloride (PVC) pipes.Effect of sulphuric acid.Requirement and test method
- TCVN 6245-1997 Unplasticized polyvinyl chloride (PVC) infection moulded solvent welded socket fittings for use with pressure pipe.Hydraulic internal pressure test
AENOR, plasticizer required
- UNE-EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016)
- UNE-EN 13677-3:2003 Reinforced thermoplastic moulding componds. Specification for GMT. Part 3: Specific requirements.
- UNE-EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005)
- UNE-EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
- UNE-EN 16245-2:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
- UNE-EN 665:1995 RESILIENT FLOOR COVERINGS. DETERMINATION OF EXUDATION OF PLASTICIZERS.
- UNE-EN 14598-3:2006 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
- UNE-EN 13706-3:2003 Reinforced plastics composites - Specifications for pultruded profiles - Part 3: Specific requirements.
- UNE-EN 14598-2:2006 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
- UNE-EN 16245-1:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
- UNE 104306:2000 Synthetic materials. Determination of plasticizing content for PVC-P sheets used in waterproofing.
- UNE-EN 13706-2:2003 Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements.
- UNE-EN 301:2014 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
- UNE-EN 422:2009 Plastics and rubber machines - Blow moulding machines - Safety requirements
- UNE-EN 201:2010 Plastics and rubber machines - Injection moulding machines - Safety requirements
Professional Standard - Agriculture, plasticizer required
- NY/T 2543-2014 Fertilizer synergist.Regulations of efficiency experiment and assessment
- SN/T 2249-2023 Determination of 34 plasticizers in plastic raw materials and their products by gas chromatography-mass spectrometry
(U.S.) Ford Automotive Standards, plasticizer required
Japanese Industrial Standards Committee (JISC), plasticizer required
- JIS K 6899-3:2002 Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers
- JIS T 7207:2005 Humidifiers for medical use -- General requirements for humidification systems
- JIS K 6899-2:1996 Plastics -- Symbols -- Part 2: Fillers and reinforcing materials
- JIS K 6899-2:2004 Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials
- JIS K 6899-2:2015 Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials
CH-SNV, plasticizer required
Indonesia Standards, plasticizer required
IN-BIS, plasticizer required
工业和信息化部, plasticizer required
- HG/T 5781-2021 Rubber plasticizer high viscosity mineral oil
- HG/T 5647-2019 Plasticizer 2-ethylhexyl benzoate
- HG/T 5648-2019 Plasticizer di(2-propylheptyl) adipate
- HG/T 5840-2021 Plasticizer triethylene glycol di-2-ethylhexanoate
- QB/T 5081-2017 Technical conditions for special heat stabilizer for unplasticized polyvinyl chloride (PVC-U) profiles
- QB/T 5078-2017 Technical conditions for special processing aids for unplasticized polyvinyl chloride (PVC-U) profiles
AT-ON, plasticizer required
ES-UNE, plasticizer required
- UNE-EN ISO 1043-3:2017 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
- UNE-EN 14598-2:2006/AC:2006 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
- UNE-EN 301:2018 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
- UNE-EN ISO 20430:2020 Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
Standard Association of Australia （SAA）, plasticizer required
- AS 2921:1987 Unplasticized polyvinyl chloride (UPVC) wall cladding - General installation requirements
- AS/NZS 3879:1995 Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings
- AS 3787.1:1997 General requirements for single-use, sterile, plasticized polyvinyl chloride (PVC) packs for human blood - Single blood packs
Association of German Mechanical Engineers, plasticizer required
- DVS 2204-1-1972 Adhesive bonding of thermoplastics; part 1: PVC free from plasticiser
BE-NBN, plasticizer required
农业农村部, plasticizer required
- SC/T 8155-2018 Technical requirements for demoulding of glass fiber reinforced plastic fishing boat hulls
- SC/T 8144-2018 Technical requirements for the production of fiberglass reinforced plastic liner in fish cabins of fishing boats
- SC/T 8154-2018 Technical requirements for vacuum introduction molding process of glass fiber reinforced plastic fishing boats
Professional Standard - Meteorology, plasticizer required
- QX/T 658-2023 Operating requirements for artificial rain (snow) surface catalyst generator
GM Europe, plasticizer required
Professional Standard - Commodity Inspection, plasticizer required
- SN/T 2409-2009 Determination of phosphate esters in toys
- SN/T 3352-2012 Determination of phosphate plasticizers in adhesives used in publiding for import and export
- SN/T 2250-2009 Determination of plasticizers in plastics and plastic articles.Gas Chromatography-mass spectrometry(GC-MS)method
- SN/T 1779-2006 Determination of phthalate plasticizers in plastic bags for human blood and blood components - Gas chromatography-mass spectrometry method
- SN/T 2249-2009 Determination of phthalates in plastics and plastic articles.Gas chromatography-mass spectrometry(GC-Ms)method
- SN/T 2742-2010 Determination of the plasticizers in PVC materials for export.GC-MS
ABS - American Bureau of Shipping, plasticizer required
- ABS 22-1997 Requirements for Materials and Welding - Part 2 - Aluminum - Fiber Reinforced Plastics (FRP)
Hebei Provincial Standard of the People's Republic of China, plasticizer required
- DB13/T 2689-2018 General technical requirements for thermoplastic polyurethane elastomer toughened polyoxymethylene copolymer engineering plastics
国家市场监督管理总局、中国国家标准化管理委员会, plasticizer required
- GB/T 39307-2020 Fluorescent whitening agents—Determination of shade and relative whiteness—Plastic coloring
- GB/T 39110-2020 Consumer product—Plastics—Rapid screening of phthalates
- GB/T 36793-2018 Determination of platicizers in rubber-plastics—Gas chromatography-mass spectrometry method
- GB/T 37226-2018 Criterion of forensic science human fluorescence STR multiplex amplification reagent
FI-SFS, plasticizer required
- SFS 3900 E-1978 In the event of any differences in interpretation of this standard the Finnish version shall take precedence over this translation.
GM Global, plasticizer required
- GMW 15921-2012 Adhesion Requirements for Bonding Exterior Glass Reinforced Thermoset Plastics Issue 2; English
GOSTR, plasticizer required
- GOST R 59100-2020 Plastics. Filaments for additive technologies. General technical requirements
- GOST R 59101-2020 Plastics. Filaments for additive technologies. General requirements for technological processes
- GOST R 57588-2017 Equipment for additive processes. General requirements
GM Holden Ltd, plasticizer required
- HOLDEN HN 1397-2013 Primer Silicone Sealant Plasticiser Resistant Do Not Use on New Programs, No Replacement
JP-JWWA, plasticizer required
- JWWA S101-2006 Adhesives for unplasticized polyvinyl chloride pipes for water supply
CU-NC, plasticizer required
中国气象局, plasticizer required
- QX/T 569-2020 Technical requirements for site selection and installation of artificial rain (snow) ground catalyst generators
- QX/T 473-2019 Technical requirements for propeller-type aircraft airborne flame agent catalytic equipment for artificial rainfall enhancement
American Concrete Institute, plasticizer required
- ACI 212.4R-2004 Guide for the Use of High-Range Water-Reducing Admixtures (Superplasticizers) in Concrete
Anhui Provincial Standard of the People's Republic of China, plasticizer required
- DB34/T 2982-2017 Determination of plasticizers DHNUP and DIHP in plastics and their products Gas chromatography-mass spectrometry
IPC - Association Connecting Electronics Industries, plasticizer required
JSAE - Society of Automotive Engineers of Japan@ Inc., plasticizer required
- JASO M111-1998 Compressed natural gas vehicles - Textile reinforced plastic fuel hoses for high pressure use - Performance requirements
American Bureau of Shipping , plasticizer required
- ABS 22-2003 Requirements for Materials and Welding - Part 2 - Aluminum and Fiber Reinforced Plastics (FRP)(Chapters 5-6)
Liaoning Provincial Standard of the People's Republic of China, plasticizer required
- DB21/T 3437-2021 Operational Requirements for Aircraft Artificial Rain Enhancement
Institute of Interconnecting and Packaging Electronic Circuits (IPC), plasticizer required
CEN - European Committee for Standardization, plasticizer required
- EN 12012-4:2019 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
Professional Standard-Ships, plasticizer required
NZ-SNZ, plasticizer required
- NZS 7643:1979 Code of Practice for the INSTALLATION OF UNPLASTICIZED PVC PIPE SYSTEMS (Incorporating Amendment 1: 07/1992)
Sichuan Provincial Standard of the People's Republic of China, plasticizer required
- DB51/T 2000-2015 Determination of optical brighteners in plastic products by high performance liquid chromatography
Professional Standard - Public Safety Standards, plasticizer required
- GA/T 815-2009 Criterion for the human fluorescent STR multiplex PCR reagent
ANSI - American National Standards Institute, plasticizer required
- B151.1-2017 Plastics Machinery Safety Requirements for Injection Molding Machines (SPI)
Professional Standard - Post and Telecommunication, plasticizer required
- YD/T 2913-2015 Security aspects of network enhancement for machine-type communications
Shanxi Provincial Standard of the People's Republic of China, plasticizer required
- DB14/T 1917-2019 Requirements for Catalytic Potential of Artificial Rainfall (Snow)
TH-TISI, plasticizer required
PK-PSQCA, plasticizer required
American Society of Mechanical Engineers (ASME), plasticizer required
- ASME 2225-2001 Alternative Inspection Requirements for Fiber Reinforced Plastic Pressure Vessel Section X; ANNULLED: SUPP 6
JP-JCS, plasticizer required
- JCS 7264-2009 Testing methods for coloring agent of plasticized polyvinyl chloride compounds for electric wires and cables