ZH
RU
ES

Organic Polymer Synthetic Materials

Organic Polymer Synthetic Materials, Total:255 items.

In the international standard classification, Organic Polymer Synthetic Materials involves: Reinforced plastics, Mechanical testing, Wood technology processes, Wood-based panels, Plastics, Footwear, Installations in buildings, Construction materials, Bridge construction, Dentistry, Test conditions and procedures in general, Electrical accessories, Shipbuilding and marine structures in general, Insulation, Insulating materials, Rubber and plastics products, Construction industry, Protection against fire, Miscellaneous domestic and commercial equipment, Analytical chemistry, Products of the textile industry, Protection of and in buildings, Internal combustion engines, Equipment for entertainment, Pharmaceutics, Wastes, Non-ferrous metals, Rails and railway components, Electronic component assemblies, Electrical wires and cables, Materials and articles in contact with foodstuffs, Water quality, Medical equipment, Raw materials for rubber and plastics, Welding, brazing and soldering, Ceramics, Road engineering, Fertilizers, Air quality, Nuclear energy engineering, Road vehicles in general, Materials for aerospace construction, Paints and varnishes, Refractories.

保定市市场监督管理局, Organic Polymer Synthetic Materials

DB1306/T 185-2021 Agricultural polymer organic amine chelated copper fertilizer

RU-GOST R, Organic Polymer Synthetic Materials

GOST R 56806-2015 Polymer composites. Identification of polymer composites in electronic databases
GOST R 56807-2015 Polymer composites. Recording of mechanical test data of polymer composites in electronic databases. General requirements
GOST R 56782-2015 Polymer composites. Prepregs. Determenation of constituent content of prepreg by Soxhlet extraction
GOST R 56740-2015 Polymer composites. Method for determination of translaminar fracture toughness characteristic of polymer composite laminates and pultruded polymer composites
GOST R 56787-2015 Polymer composites. Nondestructive testing
GOST 33346-2015 Polymer composites. Production of plates by contact and spray-up moulding for preparation of test specimens
GOST R 54928-2012 Pedestrian bridges for polymer composites. Specifications
GOST R 56795-2015 Polymer composites. Shearography of polymer composite materials, sandwich core materials and filament-wound pressure vessels
GOST R 56760-2015 Polymer composites. Identification of fibers, fillers and core materials in computerized materials property databases
GOST 33351-2015 Polymer composites. Production of samples for testing by injection moulding of long-fibre moulding compounds
GOST R 56796-2015 Polymer composites. Prepregs. Method for determination of constituent content of prepreg
GOST R 56763-2015 Polymer composites. Method for determination of tensile strength of sandwich core materials
GOST R 56788-2015 Polymer composites. Test method open-hole compressive strength of polymer matrix composite laminates
GOST 33348-2015 Polymer composites. Production of plates from prepregs for preparation of test specimens
GOST R 56800-2015 Polymer composites. Determination of tensile properties of unreinforced and reinforced materials
GOST R 56798-2015 Polymer composites. Method for determination the mechanical characteristics of sandwich constructions flexural
GOST R 56789-2015 Polymer composites. Prepreg. Method for determination of volatiles content in prepreg
GOST 33119-2014 Polymer composites constructions for foot-bridges. Specifications
GOST R 56808-2015 Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
GOST R 56792-2015 Polymer composites. Test method on stratifying with winding on drum
GOST 33347-2015 Polymer composites. Production of plates by pressing for preparation of test specimens
GOST R 56764-2015 Polymer composites. Method for measurement of thickness of sandwich construction cores
GOST R 56739-2015 Polymer composites. Method for determination of water migration in sandwich construction cores
GOST R 56799-2015 Polymer composites. Method of definition of mechanical characteristics at shear on samples with V-notched cut
GOST R 56814-2015 Polymer composites. Ultrasonic testing of sandwich constructions face sheet and core material
GOST R 56810-2015 Polymer composites. Test method for flexural flat samples
GOST R 56813-2015 Polymer composites. Guide for preparation of flat panel testing and machining
GOST R 55073-2012 Resistance polymer composites for repairing industrial pipe-line. Specifications
GOST R 56811-2015 Polymer composites. Radiography of the outer layers and the material of the inner layer of the sandwich constructions
GOST 33350-2015 Polymer composites. Production of plates by transfer moulding for preparation of test specimens
GOST R 58022-2017 Polymer composite crossarms. Method for determination of flexural mechanical properties
GOST 33345-2015 Polymer composites. Production of plates for preparation of test specimens. General technical requirements
GOST R 56812-2015 Polymer composites. Method for determination of mechanical characteristics in combined loading compression
GOST R 56785-2015 Polymer composites. Test method for tensile of flat specimens
PNST 60-2015 Polymer soextrusion film modified nanocomposites. General specifications
GOST R 56786-2015 Polymer composites. Method for determination of shear strength in the plane of the reinforcement
GOST R 56797-2015 Polymer composites. Axial compressive test method for mechanical characteristics of hoop wound polymer matrix composite cylindrical specimens
GOST R 56772-2015 Polymer composites. Method for determination static energy absorption properties of honeycomb sandwich core materials
GOST R 57218-2016 Electromagnetic compatibility for electronic equipment. Composites the polymeric radar absorbing. General technical requirements
GOST R 57268.4-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 4. High-temperature method
GOST R 56815-2015 Polymer composites. Method for determination specific work of exfoliation in tearing off conditions GIC
GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST R 56774-2015 Polymer composites. Determination of two-dimensional mechanical characteristics of bending sandwich constructions subjected to a distributed load
GOST R ISO 6474-2-2014 Implants for surgery. Ceramic materials. Part 2. Composite materials based on a high-purity alumina matrix with zirconia reinforcement
GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
GOST R 57406-2017 Silicone elastomers, gels and foams used in medicine. Part 1. Formulations and compounding materials
GOST R 57205-2016 Electromagnetic compatibility of technical equipment. Radar absorbing polymer composite coating. General specifications
GOST R 55074-2012 Chemical resistance polymer composites for lining industrial tanks and vessels. General specifications
GOST 33685-2015 Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC

Professional Standard - Commodity Inspection, Organic Polymer Synthetic Materials

SN/T 3938-2014 Food contact materials.Polymers.Determination of organotin compounds.Gas chromatography-mass spectrometry
SN/T 3766-2014 General requirements of extraction technology for hazardous organisms in polymer parts of electrical and electronic products
SN/T 3386-2012 Food contact materials.Polymers.Test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides
SN/T 3045-2011 Food contact materials for export. Polymers. Determination of migrat harmful aromatic amines. HPLC
SN/T 2812-2011 Determination of extracts from olefin polymers in polymer materials for export food contact materials
SN/T 2815-2011 Determination of Polyoxymethylene Polyoxymethylene Extract in High Molecular Materials for Export Food Contact Materials
SN/T 2597-2010 Determination of lead,cadmium,chromium,arsenic,antimony,germanium migration quantity in polymer for food contact materials.Inductively coupled plasma atomic emission spectometry method
SN/T 2891-2011 Determination of chromium, zirconium, vanadium and hafnium in polymer materials polyethylene and polypropylene for export food contact materials Inductively coupled plasma atomic emission spectrometry

British Standards Institution (BSI), Organic Polymer Synthetic Materials

BS 1982-1:1990 Fungal resistance of panel products made of or containing materials of organic origin - Method for determination of resistance to wood-rotting Basidiomycetes
PD ISO/TS 16506:2017 Dentistry. Polymer-based luting materials containing adhesive components
PD IEC TS 63209-2:2022 Photovoltaic modules. Extended-stress testing. Polymeric component materials
BS 1982-0:1990 Fungal resistance of panel products made of or containing materials of organic origin - Guide to methods for determination
BS 1982-2:1990 Fungal resistance of panel products made of or containing materials of organic origin - Method for determination of resistance to cellulose-decomposing microfungi
BS 1982-3:1990 Fungal resistance of panel products made of or containing materials of organic origin - Methods for determination of resistance to mould or mildew
BS EN ISO 21304-2:2021 Plastics. Ultra-high-molecular-weight polyethylene (PE- UHMW) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 12873-1:2014 Influence of materials on water intended for human consumption. Influence due to migration. Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials
19/30387275 DC BS EN ISO 21304-2. Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
BS EN ISO 3826-4:2015 Plastics collapsible containers for human blood and blood components. Aphaeresis blood bag systems with integrated features
BS 5131 Sec.5.13:1980 Methods of test for footwear and footwear materials. Testing of complete footwear. Measurement of the strength of stitched seams in upper and lining materials
BS ISO 12219-6:2017 Interior air of road vehicles. Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature. Small chamber method
BS ISO 22415:2019 Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials
DD ENV 658-1-1993 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of tensile strength
BS EN ISO 21079-3:2009 Chemical analysis of refractories containing alumina, zirconia, and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method). Flame atomic absorption spectrophotometry (FAAS) and inductively coupled pl
BS EN ISO 21079-3:2008 Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) Part 3: Flame atomic absorption spectrophotometry (FAAS) and ind
BS EN 658-4:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by compression loading of notched test specimens

American Society for Testing and Materials (ASTM), Organic Polymer Synthetic Materials

ASTM G21-13 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM E2058-13 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D7290-06(2011) Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
ASTM D5229/D5229M-92(2004) Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
ASTM D5229/D5229M-92(1998)e1 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
ASTM D5229/D5229M-92(2010) Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
ASTM D5229-14(2019)e1 Standard test method for moisture absorption properties and equilibrium conditions of polymer matrix synthetic materials
ASTM D2940/D2940M-20 Standard Specification for Graded Aggregate Material for Bases or Subbases for Highways or Airports
ASTM C1474-19 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry

Group Standards of the People's Republic of China, Organic Polymer Synthetic Materials

T/NHXY 2-2019 PA polymer composite shoe toplift
T/CECS 10152-2021 Polymer mineral impermeable material
T/CEEIA 436-2020 Test Method for Compatibility of Synthetic Organic Ester Type Insulating Oil and Construction Material
T/CECS 1044-2022 Technical standards for large-scale 3D printing of polymer composite materials
T/ZJGS 15-2021 Technical Specifications for Padlock Accessories Part 4: Lock Cylinders for Padlock Padlocks with Tongs and Pins of Polymer Composite Materials
T/CECS 603-2019 Technical specification for application of water based rubber polymer composite waterproof material
T/SCDA 111-2022 NB Inorganic Modified Polymer Paste Thermal Insulation Material Application Technical Standard for External Wall Internal Thermal Insulation System

Liaoning Provincial Standard of the People's Republic of China, Organic Polymer Synthetic Materials

DB21/T 2617-2016 Polymer material aluminum composite radiator
DB21/T 2838-2017 On-site test method for core material thickness of polymer waterproof material composite sheet (FS2)
DB21/T 2839-2017 Test method for mineral filler content in polymer waterproof material composite sheet (FS2)
DB21/T 2837-2017 On-site test method for mass per unit area of polymer waterproof material composite sheet (FS2)

Society of Automotive Engineers (SAE), Organic Polymer Synthetic Materials

SAE AMS3902-1974 CLOTH, ORGANIC FIBER, HIGH MODULUS For Structural Composites
SAE AMS3902A-1977 CLOTH, ORGANIC FIBER, HIGH MODULUS For Structural Composites
SAE AMS3902B-2011 CLOTH, ORGANIC FIBER, (PARA-ARAMID) HIGH MODULUS For Structural Composites
SAE AMS3901-1974 ORGANIC FIBER, YARN AND ROVING, HIGH MODULUS For Structural Composites
SAE AMS3902E-2022 Cloth, Organic Fiver (Para-Aramid), High Modulus For Structural Composites

German Institute for Standardization, Organic Polymer Synthetic Materials

DIN ISO/TS 16506:2021-05 Dentistry - Polymer-based luting materials containing adhesive components (ISO/TS 16506:2017, Corrected version 2018-03)
DIN 51604-1:2020 FAM-testing fluid for polymer materials - Composition and requirements - Part 1: Testing Fluid A
DIN 51604-1:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 1: Testing Fluid A
DIN 53530:1981 Testing of organic materials; Separation test on fabric plies bonded together
DIN 51604-2:2020 FAM-testing fluid for polymer materials - Composition and requirements - Part 2: Testing Fluid B, containing methanol
DIN 51604-2:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 2: Testing Fluid B, containing methanol
DIN ISO/TS 16506:2021 Dentistry - Polymer-based luting materials containing adhesive components (ISO/TS 16506:2017, Corrected version 2018-03)
DIN 51604-3:2020 FAM-testing fluid for polymer materials - Composition and requirements - Part 3: Testing Fluid C, methanol containing lower layer
DIN VDE 0441-1:1985 Tests on insulators of organic material for systems with nominal alternating voltages greater than 1000 V; tests on materials
DIN 1164-12:2005 Special cement - Part 12: Composition, specification and conformity evaluation for cement with higher quantity of organic constituents
DIN 51604-3:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 3: Testing Fluid C, methanol containing lower layer
DIN 53530:1981-02 Testing of organic materials; Separation test on fabric plies bonded together
DIN EN ISO 21304-1:2019-08 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019); German version EN ISO 21304-1:2019
DIN CEN/TS 17784-2:2022-07 Organo-mineral fertilizers - Identification of complexing agents - Part 2: Method using high-performance liquid chromatography (HPLC); German version CEN/TS 17784-2:2022
DIN EN ISO 21304-2:2021-04 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021); German version EN ISO 21304-2:2021
DIN EN 61190-1-3:2007 Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications (IEC 61190-1-3:2007); German version EN 61190-1-3:2007
DIN EN 13920-8:2003-08 Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes; German version EN 13920-8:2003
DIN EN 12873-1:2014 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous/enamel) materials; German version EN 12873-1:2014
DIN EN 658-2:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties; German version EN 658-2:2002
DIN EN 12873-1:2014-09 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous/enamel) materials; German version EN 12873-1:2014
DIN EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009); German version EN ISO 25762:2012
DIN ISO 13741-2:2003 Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic); Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 2: Headspace method (ISO 13741-2:1998)
DIN ISO 13741-2:2003-04 Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic); Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 2: Headspace method (ISO 13741-2:1998)
DIN EN 658-1:1999 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties; German version EN 658-1:1998

Association Francaise de Normalisation, Organic Polymer Synthetic Materials

NF EN 61099:2011 Liquides isolants - Spécifications relatives aux esters organiques de synthèse neufs destinés aux matériels électriques
XP S91-098*XP ISO/TS 16506:2018 Dentistry - Polymer-based luting materials containing adhesive components
NF EN 12873-1:2014 Influence des matériaux en contact sur l'eau destinée à la consommation humaine - Influence de la migration - Partie 1 : méthode d'essai des matériaux de fabrication industrielle constitués de ou contenant des matériaux organiques ou vitreux (...
NF EN 1186-11:2003 Matériaux et objets en contact avec les denrées alimentaires - Matière plastique - Partie 11 : méthodes d'essai pour la migration globale dans des mélanges de triglycérides synthétiques marqués au 14C
NF EN ISO 17304:2014 Médecine bucco-dentaire - Rétraction de polymérisation : méthode de détermination de la rétraction à la polymérisation des matériaux de restauration à base de polymère
XP P41-280:2008 Effect of materials on the quality of water intended for human consumption . Objects constituted by several components among which at least organic one entering the contact of the water . Obtaining and analysis of the water of migration
NF A50-110-8*NF EN 13920-8:2003 Aluminium and aluminium alloys - Scrap - Part 8 : scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes
NF P41-036-1*NF EN 12873-1:2014 Influence of materials on water intended for human consumption - Influence due to migration - Part 1 : test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials
NF F67-010:1989 Rolling stock. Terminology of electronic equipment for rolling stock. Terms related to contracts and mechanical constitution of equipments.
NF EN ISO 21304-1:2019 Plastiques - Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion - Partie 1 : système de désignation et base de spécifications
XP CEN/TS 17784-2:2022 Engrais organo-minéraux - Identification des agents complexants - Partie 2 : méthode par chromatographie liquide à haute performance (HPLC)
NF EN 61190-1-1:2002 Matériaux de fixation pour les assemblages électroniques - Partie 1-1 : exigences relatives aux flux de brasage pour les interconnexions de haute qualité dans les assemblages de composants électroniques
NF C27-228-3-2*NF EN 60819-3-2:2002 Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materiels - Sheet 2 : hybrid inorganic-organic paper
NF EN 60660:2000 Isolateurs - Essais de support isolants d'intérieur en matière organique destinés à des installations de tension nominale supérieure à 1 kV jusqu'à 300 kV non compris
NF C90-700-1-3:2002 Attachment materials for electronic assembly - Part 1-3 : requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications.
NF C90-700-1-3/A1:2010 Attachment materials for electronic assembly - Part 1-3 : requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications.
NF C90-700-1-3*NF EN IEC 61190-1-3:2018 Attachment materials for electronic assembly - Part 1-3 : requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications
XP CEN/TS 17789-1:2022 Engrais organo-minéraux - Identification des agents chélatants - Partie 1 : détermination de l'EDTA, de l'HEEDTA et du DTPA par chromatographie ionique
NF C90-700-1-3:2008 Attachment materials for electronic assembly - Part 1-3 : requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications.
NF EN 13920-8:2003 Aluminium et alliages d'aluminium - Scrap (matières premières pour recyclage) - Partie 8 : scrap composé de non-ferreux de broyage destiné aux procédés de récupération de l'aluminium
XP U42-763-1*XP CEN/TS 17789-1:2022 Organo-mineral fertilizers - Identification of chelating agents - Part 1 : determination of EDTA, HEEDTA and DTPA by ion chromatography
XP U42-761-2*XP CEN/TS 17784-2:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 2 : method using high-performance liquid chromatography (HPLC)
NF EN 60454-3-19:2003 Rubans adhésifs sensibles à la pression à usages électriques - Partie 3 : spécification pour matériaux particuliers - Feuille 19 : rubans fabriqués à partir de différents matériaux support avec un adhésif sensible à la pression sur les deux...
NF F74-001-4:1994 Installations fixes et matériel roulant ferroviaires - Équipement électroniques et micro-informatiques de signalisation et d'aide à la conduite - 4e partie : composants.
XP CEN/TS 17790:2022 Engrais organo-minéraux - Détermination de la teneur en oligo-éléments chélatés et de la fraction chélatée d'oligo-éléments par traitement avec une résine échangeuse de cations
XP U42-764*XP CEN/TS 17790:2022 Organo-mineral fertilizers - Determination of the chelated micronutrient content and the chelated fraction of micronutrients by treatment with a cation exchange resin
NF B43-216*NF EN 1894:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens.
NF B49-424-3*NF EN ISO 21079-3:2008 Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 % to 45 % of ZrO2 (alternative to the X-ray fluorescence method) - Part 3 : flame atomic absorption spectrophotometry (FAAS) and inductively coupled pla
NF ISO 16000-24:2019 Air intérieur - Partie 24 : essai de performance pour l'évaluation de la réduction des concentrations en composés organiques volatils par des matériaux de construction sorptifs

国家市场监督管理总局、中国国家标准化管理委员会, Organic Polymer Synthetic Materials

GB/T 37949-2019 Purity test method of small molecule materials applied in organic light emitting diode display (OLED)—High performance liquid chromatography (HPLC)

International Organization for Standardization (ISO), Organic Polymer Synthetic Materials

ISO/TS 16506:2017 Dentistry - Polymer-based luting materials containing adhesive components
ISO 21304-1:2019 Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications
ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 11542-2:1998/cor 1:2007 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Technical Corrigendum 1
ISO 3826-4:2015 Plastics collapsible containers for human blood and blood components - Part 4: Aphaeresis blood bag systems with integrated features
ISO 12219-6:2017 Interior air of road vehicles - Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature - Small chamber method

SAE - SAE International, Organic Polymer Synthetic Materials

SAE AMS3902C-1995 Cloth@ Organic Fiber (Para-Aramid)@ High Modulus for Structural Composites
SAE AMS3902D-1998 Cloth@ Organic Fiber (Para-Aramid)@ High Modulus for Structural Composites

未注明发布机构, Organic Polymer Synthetic Materials

BS 1982-0:1990(1999) Fungal resistance of panel products made of or containing materials of organic origin — Part 0 : Guide to methods for determination
BS 1982-2:1990(2008) Fungal resistance of panel products made of or containing materials of organic origin — Part 2 : Method for determination of resistance to cellulose - decomposing microfungi
DIN EN ISO 11890-1:2002 Coating materials – Determination of the content of volatile organic compounds (VOC content) – Part 1: Differential method

Korean Agency for Technology and Standards (KATS), Organic Polymer Synthetic Materials

KS B 5552-2004 Impact testing machines for plastic matelials－Instrumentation
KS M 1995-2009 Determination of organic compounds emitted from plastics－Gas chromatographic method
KS C IEC 61190-1-3:2006 Attachment materials for electronic assembly－Part 1－3：Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
KS C IEC 60819-3-2:2021 Non-cellulosic papers for electrical purposes — Part 3: Specifications for individual materials — Sheet 2: Hybrid inorganic-organic paper
KS M 1998-1-2005 Determination of the emission rate of formaldehyde and volatile organic compounds in building interior products-Part 1:general
KS M ISO 13741-2-2016(2021) Plastics/rubber－Polymer dispersions and rubber latices (natural and synthetic)－Determination of residual monomers and other organic components by capillary-column gas chromatography－Part 2：Headspace m
KS M ISO 13741-2:2016 Plastics/rubber－Polymer dispersions and rubber latices (natural and synthetic)－Determination of residual monomers and other organic components by capillary-column gas chromatography－Part 2：Headspace m
KS C IEC 60454-3-19:2018 Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on bo
KS M 1998-2-2005 Determination of the emission rate of formaldehyde and volatile organic compounds in building interior products-Part 2:Small chamber method
KS M ISO 13741-2:2006 Plastics/rubber-Polymer dispersions and rubber latices (natural and synthetic)-Determination of residual monomers and other organic components by capillary-column gas chromatography-Part 2:Headspace method
KS M 1998-3-2005 Determination of the emission rate of formaldehyde and volatile organic compounds in building interior products-Part 3:Emission cell method
KS M 1998-3-2014 Determination of the emission rate of formaldehyde and volatile organic compounds in building interior products-Part 3:Emission cell method

Professional Standard - Machinery, Organic Polymer Synthetic Materials

JB/T 12074-2014 Quantitative analysis of composition metal.Electron probe microanalysis
JB/T 10305-2001 Technical specification on indoor post insulators of organic material for 3.6kV up to 40.5kV high-voltage equipment

United States Navy, Organic Polymer Synthetic Materials

NAVY QPL-24613-33-2007 DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC

GOSTR, Organic Polymer Synthetic Materials

GOST R 57152-2016 Polymer composites. Method for determination of highly elastic and relaxation characteristics of organic glasses
GOST R 58950-2020 Enclosing structures of buildings. Method for determining the period of polymer thermal insulation effective operation
GOST 34596-2019 Food products, feed, food raw materials. Determination of the mass fraction of methylmercury compounds and inorganic mercury compounds by high performance liquid chromatography-mass spectrometry with inductively coupled plasma

IL-SII, Organic Polymer Synthetic Materials

S.I.692-1972 TESTING OF CLEANING MATERIALS BASED ON SYNTHETIC SURFACE ACTIVE AGENTS: DETERMINATION OF NON-IONIC SURFACE ACTIVE AGENT

NEMA - National Electrical Manufacturers Association, Organic Polymer Synthetic Materials

NEMA C29.14A-2019 Composite Insulators Guy (Strain) Insulator Type (Ultra-Violet Light Resistant Polymer Material Covered Rod Type)

US-CFR-file, Organic Polymer Synthetic Materials

CFR 7-205.606-2014 Agriculture. Part 205:National organic program. Subpart G:Administrative. Section205.606:Nonorganically produced agricultural products allowed as ingredients in or on processed products labeled as"organic".
CFR 7-205.601-2014 Agriculture. Part 205:National organic program. Subpart G:Administrative. 205.606 Nonorganically produced agricultural products allowed as ingredients in or on processed products labeled as ‘‘organic.’’.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Organic Polymer Synthetic Materials

GB/T 26869-2011 Insulator-test on indoor post insulator of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV

AT-ON, Organic Polymer Synthetic Materials

ONORM DIN 55928-9-1992 Protection of steel structures from corrosion by organic and metallic coatings - Coating materials - Composition of binders and pigments

工业和信息化部, Organic Polymer Synthetic Materials

JBT13726.1-2019 Composite material oil filter for internal combustion engines Part 1: Assembly technical conditions
JB/T 13726.1-2019 Composite material oil filter for internal combustion engines Part 1: Assembly technical conditions
JBT13715.1-2019 Diesel engine composite material diesel filter Part 1: Assembly technical conditions
JB/T 13715.1-2019 Diesel engine composite material diesel filter Part 1: Assembly technical conditions

国家质量监督检验检疫总局, Organic Polymer Synthetic Materials

SN/T 4695-2016 Screening of hexavalent chromium and organotin in toy materials using inductively coupled plasma mass spectrometry

Hebei Provincial Standard of the People's Republic of China, Organic Polymer Synthetic Materials

DB13/T 5127.11-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices with High-performance Liquid Chromatography for Glutaraldehyde Migration
DB13/T 5127.12-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices - High Performance Liquid Chromatography for Isocyanate Migration
DB13/T 5127.15-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices’ Polymer Materials Lead, Arsenic, Cadmium, Chromium, Copper, Antimony, Barium, Aluminum, Zinc, Tin Migration Inductively Coupled Plasma Mass Spectrometry
DB13/T 5127.8-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Device Polymer Materials by High Performance Liquid Chromatography for Migration of Terephthalic Acid
DB13/T 5127.16-2019 Determination of Toxic and Hazardous Substances in Implantable Medical Device Polymer Materials Extraction Bioburden Membrane Filtration Method
DB13/T 5127.5-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices - Spectrophotometric Method for Migration of Guanidinium Thiocyanate
DB13/T 5127.9-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices by Ethanol Migration by Gas Chromatography
DB13/T 5127.6-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices by Acetone Migration by Gas Chromatography
DB13/T 5127.3-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices’ Polymer Materials Part 3: Glucose Migration Iodometric Method
DB13/T 5127.7-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices - Lactide Migration by Gas Chromatography
DB13/T 5127.10-2019 Determination of Toxic and Hazardous Substances in Implantable Medical Device Polymer Material Extracts by Gas Chromatography for Migration of Ethylene Oxide
DB13/T 5127.2-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices’ Polymer Materials Part 2: Dimercaptopropanol Migration Iodometric Method
DB13/T 5127.14-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices - Visible-UV Spectrophotometry for Protein Migration
DB13/T 5127.4-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices - Citric Acid Migration Acid-base Neutralization Titration
DB13/T 5127.13-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices by Gas Chromatography-Mass Spectrometry
DB13/T 5127.1-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices - Part 1: Mobility of Sodium Citrate and Dipotassium EDTA by Atomic Absorption Spectrophotometry

CEN - European Committee for Standardization, Organic Polymer Synthetic Materials

EN ISO 21304-1:2019 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications

Danish Standards Foundation, Organic Polymer Synthetic Materials

DS/ISO 21304-2:2021 Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
DS/ISO 12856-2:2020 Railway applications – Polymeric composite sleepers, bearers and transoms – Part 2: Product testing
DS/EN 13920-8:2003 Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes
DS/EN ISO 21304-2:2021 Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
DS/EN 60819-3-2:2002 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Hybrid inorganic-organic paper

ES-UNE, Organic Polymer Synthetic Materials

UNE-EN ISO 21304-1:2020 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019)
UNE-EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
UNE-CEN/TS 17789-1:2022 Organo-mineral fertilizers - Identification of chelating agents - Part 1: Determination of EDTA, HEEDTA and DTPA by ion chromatography (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-CEN/TS 17784-2:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 2: Method using high-performance liquid chromatography (HPLC) (Endorsed by Asociación Española de Normalización in May of 2022.)

European Committee for Standardization (CEN), Organic Polymer Synthetic Materials

EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
EN 13920-8:2003 Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes
EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
EN 1007-2:2002 Advanced technical ceramics - Ceramics composites; Methods of test for reinforcement - Part 2: Determination of linear density
FprCEN/TS 17789-1-2021 Organo-mineral fertilizers - Identification of chelating agents - Part 1: Determination of EDTA, HEEDTA and DTPA by ion chromatography
FprCEN/TS 17784-2-2021 Organo-mineral fertilizers - Identification of complexing agents - Part 2: Method using high-performance liquid chromatography (HPLC)
EN 4632-004:2012 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
FprCEN/TS 17790-2021 Organo-mineral fertilizers - Determination of the chelated micronutrient content and the chelated fraction of micronutrients by treatment with a cation exchange resin
EN 1159-3:2003 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity

Lithuanian Standards Office , Organic Polymer Synthetic Materials

LST EN 13920-8-2004 Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes
LST EN 12873-1-2014 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials
LST EN 60819-3-2-2002 Non-cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Hybrid inorganic-organic paper (IEC 60819-3-2:2001)

AENOR, Organic Polymer Synthetic Materials

UNE-EN 13920-8:2003 Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes
UNE-EN 60819-3-2:2002 Non-cellulosic papers for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Hybrid inorganic-organic paper.
UNE-EN 12873-1:2014 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials

BR-ABNT, Organic Polymer Synthetic Materials

ABNT NBR 11873-2011 Cables coated with polymeric material for distribution of air power in fixed spacers, at voltages of 13.8 kV to 34.5 kV

International Electrotechnical Commission (IEC), Organic Polymer Synthetic Materials

IEC 61190-1-3:2010 Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
IEC 60819-3-2:2001 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Hybrid inorganic-organic paper
IEC 61190-1-3:2002 Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
IEC 61190-1-3:2007 Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications

Japanese Industrial Standards Committee (JISC), Organic Polymer Synthetic Materials

JIS K 6220-2:2001 Rubber compounding ingredients -- Test methods -- Part 2: Organic accelerators and vulcanizing agents
JIS K 6220-2:2018 Rubber compounding ingredients -- Organic chemicals -- Test methods -- Part 2: Sulfenamide accelerators
JIS K 5601-5-2:2008 Testing methods for paint components -- Part 5: Determination of volatile organic compound (VOC) content in paints -- Section 2: Water-based paints (Multiple standard addition method)

Professional Standard - Medicine, Organic Polymer Synthetic Materials

YY/T 0818.1-2010 Guide for silicone elastomers, gels and forms used in medical applications.Part 1：Formulation and uncured materials

KR-KS, Organic Polymer Synthetic Materials

KS C IEC 60819-3-2-2021 Non-cellulosic papers for electrical purposes — Part 3: Specifications for individual materials — Sheet 2: Hybrid inorganic-organic paper
KS M ISO 13741-2-2016 Plastics/rubber－Polymer dispersions and rubber latices (natural and synthetic)－Determination of residual monomers and other organic components by capillary-column gas chromatography－Part 2：Headspace m
KS C IEC 60454-3-19-2018 Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on bo

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Organic Polymer Synthetic Materials

ASHRAE 4579-2002 Emission of VOCs from Materials Used in Buildings: Analytical and Sensory Aspects (RP-695)

BELST, Organic Polymer Synthetic Materials

STB 1333.0-2002 Polymer products for building. The method of determination of longevity on an activation energy of thermal - oxidizing destruction of polymer materials

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Organic Polymer Synthetic Materials

JEDEC JESD22-A120B-2014 Test Method for the Measurement of Moisture Diffusivity and Water Solubility in Organic Materials Used in Electronic Devices

Association of German Mechanical Engineers, Organic Polymer Synthetic Materials

DVS 2225-3-1993
VDI 2457 Blatt 4-2000 Gaseous emission measurement - Chromatographic determination of organic compounds - Sampling of acidic components in alkaline aqueous solution; Analysis by ion chromatography

European Committee for Electrotechnical Standardization（CENELEC）, Organic Polymer Synthetic Materials

EN 60819-3-2:2001 Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Hybrid Inorganic-Organic Paper

IN-BIS, Organic Polymer Synthetic Materials

IS 9299 Pt.3/Sec.6-1993