ZH
RU
ES
DTAG
DTAG, Total:134 items.
In the international standard classification, DTAG involves: Education, Thermodynamics and temperature measurements, Products of the chemical industry, Ceramics, Electrical engineering in general, Iron and steel products, Testing of metals, Quality, Non-ferrous metals, Analytical chemistry, Physics. Chemistry, Vocabularies, Measurement of volume, mass, density, viscosity, Electricity. Magnetism. Electrical and magnetic measurements, Test conditions and procedures in general, Telecommunication terminal equipment, Integrated circuits. Microelectronics.
Professional Standard - Education, DTAG
- JY/T 0589.5-2020 General Principles of Thermal Analysis Methods Part 5: Thermogravimetric-Differential Thermal Analysis and Thermogravimetric-Differential Scanning Calorimetry
- JY/T 0589.2-2020 General Principles of Thermal Analysis Methods Part 2: Differential Thermal Analysis
- JY/T 0589.3-2020 General Principles of Thermal Analysis Methods Part 3: Differential Scanning Calorimetry
Professional Standard - Machinery, DTAG
North Atlantic Treaty Organization Standards Agency, DTAG
- STANAG 4515-2002 EXPLOSIVES: THERMAL CHARACTERIZATION BY DIFFERENTIAL THERMAL ANALYSIS, DIFFERENTIAL SCANNING CALORIMETRY AND THERMOGRAVIMETRIC ANALYSIS
NATO - North Atlantic Treaty Organization, DTAG
- STANAG 4515-2015 EXPLOSIVES. THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA). DIFFERENTIAL SCANNING CALORIMETRY (DSC)@ HEAT FLOW CALORIMETRY (HFC)@ AND THERMOGRAVIMETRIC ANALYSIS (TGA) (ED 2)
Professional Standard - Commodity Inspection, DTAG
- SN/T 2240-2008 Accelerated storage test,thermal analysis methods for dangerous goods.Differential thermal analysis(DTA)and thermo gravimetric analysis(TGA)
German Institute for Standardization, DTAG
- DIN 51007:2019 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
- DIN 51007:2019-04 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
- DIN 51007:1994 Thermal analysis; differential thermal analysis; principles
- DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).
- DIN 51007-2:2021 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
- DIN 51007-2:2021-10 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
- DIN 51004:1994 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
- DIN EN 61025:2007 Fault tree analysis (FTA) (IEC 61025:2006); German version EN 61025:2007
- DIN 51006:2023-03 Thermal analysis - Thermogravimetry - Principles / Note: Date of issue 2023-01-27*Intended as replacement for DIN 51006 (2005-07).
- DIN EN ISO 15796:2008 Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005); English version of DIN EN ISO 15796:2008-11
- DIN 51006:2005-07 Thermal analysis (TA) - Thermogravimetry (TG) - Principles / Note: To be replaced by DIN 51006 (2023-03) (in preparation).
- DIN EN 60584-2:1994 Thermocouples - Part 2: Tolerances (IEC 60584-2:1982 + A1:1989); German version EN 60584-2:1993
- DIN EN ISO 15796:2008-11 Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005); German version EN ISO 15796:2008
- DIN 51006:2005 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, DTAG
- GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
- GB/T 6297-2002 Standard test method for differential thermal analysis of row materials of ceramic
- GB/T 15814.3-1995 Reagent of fireworks and firecrackers--Thermal compatibility test--Method of DTA and DSC
- GB/T 704-1988 Dimensions, shape, weight and tolerances for hot-rolled flats
- GB/T 14981-1994 Dimenisions shape weight and tolerances for hot-rolled wire rods
- GB/T 707-1988 Hot-rolled channel steel--Dimensions,shape,weight and tolerances
- GB/T 14981-2004 Dimenisions,shape,mass and tolerances for hot-rolled wire rods
- GB/T 702-2008 Dimensions, shapes, weights and allowable deviations of hot-rolled steel bars
- GB 707-1988 Dimensions, shapes, weights and allowable deviations of hot-rolled channel steel
- GB/T 9946-1988 Dimensions,shape,weight and tolerances for hot-rolled L-sectional steel
- GB/T 706-1988 Hot-rolled beam steel--Dimensions,shape,weight and tolerances
- GB/T 14981-2009 Dimension,shape,mass and tolerance for hot-rolled round wire rod
- GB/T 16839.2-1997 Thermocouples--Part 2: Tolerances
- GB/T 9787-1988 Hot-rolled equal-leg angle steel--Dimensions,shape,weight and tolerances
- GB/T 702-1986 Hot-rolled round and square steels--Dimension,shape,weight and tolerance
- GB/T 9788-1988 Hot-rolled unequal-leg angle steel--Dimensions,shape,weight and tolerances
- GB/T 702-2004 Hot-rolled round and square steel bars-Dimension,Shape,weight and tolerance
- GB 702-1986 Hot-rolled round and square steels—Dimension, shape, weight and tolerance
- GB/T 911-2004 Dimensions,shapes,weight and tolerances for hot-rolled tool flat steels
American Society for Testing and Materials (ASTM), DTAG
- ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E1356-98 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
- ASTM E537-98 Standard Test Method for Assessing the Thermal Stability of Chemicals By Methods of Thermal Analysis
- ASTM E968-99 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
IN-BIS, DTAG
Association Francaise de Normalisation, DTAG
- NF EN ISO 11357-4:2021 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 4 : détermination de la capacité thermique massique
- NF L17-451:1988 Aéronautique et espace - Préimprégnés de résine thermodurcissable - Analyse thermique différentielle - Méthode d'essai.
- NF X20-102*NF EN ISO 15796:2008 Gas analysis - Investigation and treatment of analytical bias
- NF EN ISO 15796:2008 Analyse des gaz - Investigation et traitement des biais analytiques
- NF EN ISO 11357-3:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 3 : détermination de la température et de l'enthalpie de fusion et de cristallisation
- NF C42-322:1993 Thermocouples. Part 2 : tolerances.
- NF B35-655-6*NF EN ISO 8655-6:2003 Piston-operated volumetric apparatus - Part 6 : gravimetric methods for the determination of measurement error
British Standards Institution (BSI), DTAG
Military Standard of the People's Republic of China-General Armament Department, DTAG
- GJB 772.202-1989 Explosives test methods Explosives compatibility test Differential thermal analysis and differential scanning calorimetry
- GJB 737.14-1995 Test Methods for Pyrotechnic Agents Compatibility Test Differential Thermal Analysis and Differential Scanning Calorimetry
- GJB/Z 89-1997 Circuit Tolerance Analysis Guide
- GJB 8683.11-2015 Test methods for physical parameters of pyrotechnics Part 11: Determination of spontaneous ignition temperature Differential thermal analysis and differential scanning calorimetry
Korean Agency for Technology and Standards (KATS), DTAG
- KS D 3052-2002(2017) Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS D 3052-1986 Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS D 3502-2013 Dimensions, mass and permissible variations of hot rolled steel sections
- KS D 3502-2015 Dimensions, mass and permissible variations of hot rolled steel sections
- KS D 3052-2002 Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS D 3052-2002(2022) Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS D 1951-1999(2006) Method for chemical analysis of oxygen-Free copper products for electron tubes
- KS I ISO 15796:2010 Gas analysis-Investigation and treatment of analytical bias
- KS I ISO 15796-2015(2020) Gas analysis-Investigation and treatment of analytical bias
- KS I ISO 15796:2015 Gas analysis-Investigation and treatment of analytical bias
- KS D 3051-2002(2022) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
- KS D 1949-1999 Method for determination of tungsten in nickel materials for electron tubes
- KS B ISO 8655-6:2017 Piston-operated volumetric apparatus-Part 6:Gravimetric methods for the determination of measurement error
- KS C IEC 60584-2:2004 Thermocouples-Part 2:Tolerances
- KS C IEC 60584-2-2004(2009) Thermocouples-Part 2:Tolerances
- KS C IEC 60584-2:2013 Thermocouples-Part 2:Tolerances
- KS D 3051-2002 Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
- KS D 3051-2002(2017) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
- KS B ISO 8655-6:2006 Piston-operated volumetric apparatus-Part 6:Gravimetric methods for the determination of measurement error
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, DTAG
- GJB 5891.17-2006 Test method of loading material for initiating explosive device Part 17: Compatibility test Method of DTA and DSC
- GJB 5382.11-2005 Test methods of physical parameter for pyrotechnic. Part 11: Determination of Autoignition temperature. DTA and DSC method
- GJB 5383.11-2005 Test methods of sensitivity and stability for pyrotechnic. Part 11: Test for stability and com[atibility. DTA and DSC method
Society of Automotive Engineers (SAE), DTAG
- SAE J409-1995 Product Analysis Permissible Variations from Specified chemical analysis of a Heat or Cast of Steel
VN-TCVN, DTAG
CZ-CSN, DTAG
CU-NC, DTAG
Professional Standard - Aviation, DTAG
- HB 6623.1-1992 Method for Determination of β Transition Temperature of Titanium Alloy Differential Thermal Analysis
International Organization for Standardization (ISO), DTAG
- ISO 15796:2005 Gas analysis - Investigation and treatment of analytical bias
- ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
European Committee for Standardization (CEN), DTAG
- EN ISO 15796:2008 Gas analysis - Investigation and treatment of analytical bias
- prEN 60584-2-1992 Thermocouples; part 2: tolerances (IEC 584-2:1982 + A1:1989)
- EN ISO 8655-6:2022 Piston-operated volumetric apparatus - Part 6: Gravimetric reference measurement procedure for the determination of volume (ISO 8655-6:2022, Corrected version 2022-06)
- EN ISO 8655-6:2002 Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error
Danish Standards Foundation, DTAG
未注明发布机构, DTAG
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, DTAG
- GB/T 702-2017 Hot-rolled steel bars—Dimensions,shape,weight and tolerances
Professional Standard - Agriculture, DTAG
- GB 704-1983 Dimensions, shapes, weights and allowable deviations of hot-rolled flat steel
Professional Standard - Ferrous Metallurgy, DTAG
- YB/T 002-1991 Dimensions, shapes, weights and allowable deviations of hot-rolled billets
- YB/T 949-1979 Chemical Analysis Tolerance Formulate Method
Japanese Industrial Standards Committee (JISC), DTAG
KR-KS, DTAG
- KS B ISO 8655-6-2017 Piston-operated volumetric apparatus-Part 6:Gravimetric methods for the determination of measurement error
- KS D 3051-2002(2017)(英文版) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
International Electrotechnical Commission (IEC), DTAG
European Committee for Electrotechnical Standardization(CENELEC), DTAG
Professional Standard - Electron, DTAG
National Metrological Verification Regulations of the People's Republic of China, DTAG
工业和信息化部/国家能源局, DTAG
European Telecommunications Standards Institute (ETSI), DTAG
Professional Standard - Petroleum, DTAG
- SY/T 0545-2012 Determination of thermal property parameters of the wax precipitation in crude oil.Test method by differential scanning calorimetry
- SY 0545-2012 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
- SY/T 0545-1995 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
Lithuanian Standards Office , DTAG
AENOR, DTAG
Defense Logistics Agency, DTAG
European Association of Aerospace Industries, DTAG
- AECMA PREN 6064-1995 Aerospace Series Non-Metallic Materials Analysis of Non-Metallic Materials (Cured) for the Determination of the Extent of Cure by Differential Scanning Calorimetry (DSC) Edition P1