ZH
RU
ES

Particle Concentration Analysis

Particle Concentration Analysis, Total:497 items.

In the international standard classification, Particle Concentration Analysis involves: Particle size analysis. Sieving, Vocabularies, Air quality, Geology. Meteorology. Hydrology, Installations in buildings, Products of the chemical industry, Miscellaneous domestic and commercial equipment, Road vehicles in general, Fuels, Compressors and pneumatic machines, Analytical chemistry, Rubber and plastics products, Power stations in general, Soil quality. Pedology, Measurement of fluid flow, Construction materials, Environmental protection, Cork and cork products, Civil engineering in general, Water quality, Earthworks. Excavations. Foundation construction. Underground works, Cutting tools, Raw materials for rubber and plastics, Ferroalloys, Linear and angular measurements, Wastes, Sterilization and disinfection, Test conditions and procedures in general, Tea. Coffee. Cocoa, Coals, Metalliferous minerals, Tobacco, tobacco products and related equipment, Ceramics, Road vehicle systems, Inorganic chemicals, Fertilizers, Testing of metals, Medical equipment, Diagnostic, maintenance and test equipment, Beverages, Welding, brazing and soldering, Semiconducting materials, Occupational safety. Industrial hygiene.

American Society for Testing and Materials (ASTM), Particle Concentration Analysis

ASTM D8526-23 Standard Test Method for Analytical Procedure Using Transmission Electron Microscopy for the Determination of the Concentration of Carbon Nanotubes and Carbon Nanotube-containing Particles in Ambient
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
ASTM E871-82(1998) Standard Method of Moisture Analysis of Particulate Wood Fuels
ASTM D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D2862-10 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-16 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D422-63(2007)e1 Standard Test Method for Particle-Size Analysis of Soils
ASTM D422-63(1998) Standard Test Method for Particle-Size Analysis of Soils
ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM E871-82(2019) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
ASTM D8049-19a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
ASTM D8049-19 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
ASTM D8049-21 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
ASTM E2524-08 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D7486-08(2013)e1 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis

British Standards Institution (BSI), Particle Concentration Analysis

23/30436644 DC BS ISO 19430. Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
BS ISO 27891:2015 Aerosol particle number concentration. Calibration of condensation particle counters
BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution. Method by image analysis for large dimension particles
BS ISO 23484:2023 Determination of particle concentration by small-angle X-ray scattering (SAXS)
BS ISO 15900:2020 Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
BS ISO 13067:2011 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
BS EN 16450:2017 Tracked Changes. Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
19/30370177 DC BS ISO 15900. Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
22/30441138 DC BS ISO 23484. Determination of particle concentration by smallangle X-ray scattering (SAXS)
BS EN ISO 14644-1:2015 Tracked Changes. Cleanrooms and associated controlled environments. Classification of air cleanliness by particle concentration
BS ISO 6344-1:1998 Coated abrasives. Grain size analysis. Grain size distribution test
BS ISO 9276-6:2008 Representation of results of particle size analysis - Descriptive and quantitative representation of particle shape and morphology
PD CEN ISO/TS 19590:2019 Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
BS ISO 8511:2011 Rubber compounding ingredients. Carbon black. Determination of pellet size distribution
BS EN ISO 14644-9:2022 Tracked Changes. Cleanrooms and associated controlled environments. Assessment of surface cleanliness for particle concentration
BS ISO 728:2021 Coke. Size analysis by sieving
BS ISO 9286:1997 Abrasive grains and crude - Chemical analysis of silicon carbide
BS ISO 4387:2000+A1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
BS ISO 16232-8:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle nature determination by microscopic analysis
BS ISO 14966:2019 Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
BS ISO 6344-3:2013 Coated abrasives. Grain size analysis. Determination of grain size distribution of microgrits P240 to P2500
BS ISO 14644-12:2018 Cleanrooms and associated controlled environments - Specifications for monitoring air cleanliness by nanoscale particle concentration
BS ISO 16232-6:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle mass determination by gravimetric analysis
BS ISO 13322-2:2006 Particle size analysis - Image analysis methods - Dynamic image analysis methods
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS EN ISO 14644-14:2016 Cleanrooms and associated controlled environments. Assessment of suitability for use of equipment by airborne particle concentration
PD ISO/TS 20593:2017 Ambient air. Determination of the mass concentration of tire and road wear particles (TRWP). Pyrolysis-GC-MS method
23/30456662 DC BS EN ISO 17830. Solid biofuels. Particle size distribution of disintegrated pellets
BS ISO 1953:2015 Hard coal. Size analysis by sieving
BS ISO 9285:1997 Abrasive grains and crude - Chemical analysis of fused aluminium oxide
BS ISO 9276-2:2001 Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 4387:2019 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
BS ISO 4387:2000+A2:2017 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
BS ISO 13320:2020 Particle size analysis. Laser diffraction methods
BS ISO 17175:2017 Bidis. Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine
BS EN 15415-1:2011 Solid recovered fuels. Determination of particle size distribution. Screen method for small dimension particles
BS ISO 13322-1:2005 Particle size analysis - Image analysis methods - Static image analysis methods
BS ISO 13322-1:2014 Particle size analysis. Image analysis methods. Static image analysis methods
20/30400951 DC BS ISO 9286. Abrasive grains and crude. Chemical analysis of silicon carbide
16/30348371 DC BS ISO 14644-12. Cleanrooms and associated controlled environments. Part 12. Specifications for monitoring air cleanliness by nanoscale particle concentration
BS ISO 6344-2:1998 Coated abrasives - Grain size analysis - Determination of grain size distribution of macrogrits P12 to P220
BS ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
18/30375050 DC BS ISO 14966. Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS ISO 13320:2010 Particle size analysis. Laser diffraction methods
BS ISO 22412:2008 Particle size analysis - Dynamic light scattering (DLS)
BS ISO 13320:2009 Particle size analysis - Laser diffraction methods
BS ISO 22412:2017 Particle size analysis. Dynamic light scattering (DLS)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Particle Concentration Analysis

GB/T 42348-2023 Particle Size Analysis Particle Tracking Analysis (PTA)
GB/T 15445-1995 Graphical representation of results of particle size analysis
GB/T 41949-2022 Particle─Laser particle size analyser─Technical requirements
GB 15445-1995 Graphical representation of particle size analysis results
GB/T 42660-2023 Calibration of aerosol particle number concentration condensation nuclei particle counters
GB/T 6167.2-1985 Methods for testing the performance of dust particle counter--Particle concentration
GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
GB/T 13277.8-2023 Compressed air part 8: Methods of measurement of mass concentration of solid particles
GB/T 22231-2008 Particle Size Distribution/Fiber Length and Diameter Distribution
GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
GB/T 16742-2008 Function representation of particle size distribution.Power-function
GB/T 16742.1-1997 Function representation of particle size distribution. Power-function
GB/T 25051-2010 Ferronickel shot.Sampling for analysis
GB/T 38517-2020 Particulate—Bioaerosols sampling and analysis—General principles
GB/T 32668-2016 Analysis of zeta potential of colloids.Electrophoresis guidelines
GB/T 29025-2012 Determination of particle size distributions.Electrical sensing zone method
GB/T 38517-2020(英文版) Particulate—Bioaerosols sampling and analysis—General principles
GB/T 19077.1-2003 Particle size analysis--Laser diffraction method
GB/T 19077-2016 Particle size analysis.Laser diffraction methods
GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm
GB/T 9258.1-2000 Coated abrasives-Grain size analysis-Part 1: Grain size distribution test

Association Francaise de Normalisation, Particle Concentration Analysis

NF X11-630:2001 Particle size analysis - Vocabulary.
NF B57-011:1973 Granulés crus de liège - Analyse granulométrique.
NF T20-223:1973 Aluminium oxide primarily used for the production of aluminium. Particle size analysis. Sieving method.
NF X43-133*NF EN ISO 28439:2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential mobility analysing systems.
NF X11-693:1983
NF X11-682:1984
NF EN 15415-3:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 3 : méthode par analyse d'images des particules de grande dimension
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
NF X44-101-9*NF EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9 : classification of surface cleanliness by particle concentration.
NF X11-632-2:2001 Representation of results of particle size analysis - Part 2 : calculation of average particle sizes/diameters and moments from particle size distributions.
NF EN ISO 14644-9:2022 Salles propres et environnements maîtrisés apparentés - Partie 9: Evaluation de la propreté des surfaces par la concentration de particules
NF X11-632-4*NF ISO 9276-4:2001 Representation of results of particle size analysis - Part 4 : characterization of a classification process
NF X44-101-1*NF EN ISO 14644-1:2016 Cleanrooms and associated controlled environments - Part 1 : classification of air cleanliness by particle concentration
NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
NF EN 16450:2017 Air ambiant - Systèmes automatisés de mesurage de la concentration de matière particulaire (PM10;PM2,5)
NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique
NF X34-214-3*NF EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3 : method by image analysis for large dimension particles
NF X43-021*NF EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10;PM2,5)
NF M03-021:1967 Analyse granulométrique du coke
NF X11-681:1982 Particle size analysis. Particle size analysis by gravity sedimentation. Pipette method.
XP T47-752:2007 End of Life Tyres (ELF) - Determination of the particle size analysis of granulates issued from End of Life Tyres - Method based on the mechanical sieving of product
NF E75-100*NF ISO 6344-1:2001 Coated abrasives - Grain size analysis - Part1 : grain size distribution test.
NF X11-666:1984 PARTICLE SIZE ANALYSIS OF POWDERS. DIFFRACTION METHOD.
NF EN ISO 17831-1:2016 Biocombustibles solides - Détermination de la résistance mécanique des granulés et des briquettes - Partie 1 : granulés
NF EN ISO 17830:2016 Biocombustibles solides - Détermination de la distribution granulométrique des granulés désintégrés
NF V37-001*NF ISO 4387:2020 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
NF V05-223:1986 Instant coffee. Size analysis.
NF X11-635:1985 Size analysis-Representation of particle size distributions - Reference models
NF X11-683:1981
NF EN ISO 28439:2011 Air des lieux de travail - Caractérisation des aérosols ultrafins/nanoaérosols - Détermination de la distribution granulométrique et de la concentration en nombre à l'aide de systèmes d'analyse différentielle de mobilité électrique
FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
XP ISO/TS 20593:2017 Air ambiant - Détermination de la concentration en masse de particules provenant de l'usure des pneumatiques et des chaussées (TRWP) - Méthode par pyrolyse-CG/SM
NF ISO 4387:2020 Cigarettes - Détermination de la teneur en matière particulaire totale et en matière particulaire anhydre et exempte de nicotine au moyen d'une machine à fumer analytique de routine
NF X44-101-14*NF EN ISO 14644-14:2016 Cleanrooms and associated controlled environments - Part 14 : assessment of suitability for use of equipment by airborne particle concentration
NF X11-632:1990 SIZE DETERMINATION. EXPRESSION FO RESULTS OF SIZE DETERMINATION.
NF EN 13205-4:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 4 : essai de performances en laboratoire par comparaison des concen...
NF P94-056:1996 Soil : investigation and testing. Granulometric analysis. Dry sieving method after washing.
FD CEN/TR 16013-3:2012 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 3 : évaluation des concentrations de particules en suspension dans l'air à l'aide de photomètres
NF E75-100-3:2013 Coated abrasives - Grain size analysis - Part 3: determination of grain size distribution of microgrits P240 to P2500
NF M03-040:1995 Hard coal. Size analysis by sieving.
NF V03-308*NF ISO 4150:1991 Green coffee. Size analysis. Manual sieving.
NF ISO 4150:1991 Café vert - Analyse granulométrique - Tamisage manuel.
NF R19-501-6:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 6 : particle mass determination by gravimetric analysis.
NF R19-501-8:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 8 : particle nature determination by microscopic analysis.

Japanese Industrial Standards Committee (JISC), Particle Concentration Analysis

JIS Z 8829:2021 Particle size analysis -- Particle tracking analysis (PTA) method
JIS Z 7151:2000 Stationary source emissions -- Determination of concentration and mass flow rate of particulate material in gas-carrying ducts -- Manual gravimetric method
JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
JIS B 9920-1:2019 Cleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness by particle concentration
JIS K 6219-4:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 4: Determination of pellet size distribution
JIS B 8392-8:2008 Compressed air -- Part 8: Test methods for solid particle content by mass concentration
JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
JIS R 1639-5:2007 Test methods of properties of fine ceramic granules Part 5: Compressive strength of a single granule
JIS R 6001-2:2017 Bonded abrasives -- Determination and designation of grain size distribution -- Part 2: Microgrits
JIS Z 8825:2013 Particle size analysis.Laser diffraction methods
JIS Z 8825:2022 Particle size analysis -- Laser diffraction methods
JIS G 1641:1998 Methods of sampling for size analysis of ferroalloys and size determination
JIS K 6219-3:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 3: Determination of individual pellet crushing strength

国家市场监督管理总局、中国国家标准化管理委员会, Particle Concentration Analysis

GB/T 38879-2020 Particle—Size analysis—Color image analysis methods
GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
GB/T 35097-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air
GB/T 35099-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air

CZ-CSN, Particle Concentration Analysis

CSN ISO 8840:1992 Rfractory materials. Determination of bulk density of granular materials (grain density)
CSN 25 7698-1976 Grain testers
CSN 44 1813 Z1-1996
CSN 22 4012-1993
CSN 44 1640-2004 Brown coals - Size analysis by sieving

ES-AENOR, Particle Concentration Analysis

American Society of Mechanical Engineers (ASME), Particle Concentration Analysis

ASME PTC 38-1980(R1985) Determining the Concentration of Particulate Matter in A Gas Stream
ASME PTC 38-1980 Determining the Concentration of Particulate Matter in a Gas Stream

PT-IPQ, Particle Concentration Analysis

E 239-1970
NP 3755-1-1999 Solid fuels.Cokes.Size analysis.Part 1:Particle size 20mm or less
I-1636-1981
NP 3862-1999 Solid fuels. Medium and High-Rank coals. Size analysis by sieving
NP 3862-1-2001 Solid fuels Médium and High-Rank coals Size analysis by sieving
NP 3755-2-1989 SOLID FUELS Cokes Size analysis. Part 2: Nominal top size greater than 20 mm
NP 3755-1-1989 SOLID FUELS Cokes Size analysis. Part 1: Nominal top size 20 mm or less

International Organization for Standardization (ISO), Particle Concentration Analysis

ISO 13320:2009 Particle size analysis - Laser diffraction methods
ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
ISO/FDIS 23484 Determination of particle concentration by small-angle X-ray scattering (SAXS)
ISO 23484:2023 Determination of particle concentration by small-angle X-ray scattering (SAXS)
ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
ISO 15900:2020 Determination of particle size distribution — Differential electrical mobility analysis for aerosol particles
ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration
ISO 14644-9:2022 Cleanrooms and associated controlled environments — Part 9: Assessment of surface cleanliness for particle concentration
ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration
ISO 9096:2003/cor 1:2006 Stationary source emissions - Manual determination of mass concentration of particulate matter; Technical Corrigendum 1
ISO 1953:1972 Hard coals; Size analysis
ISO 9276-6:2008 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology
ISO 8573-8:2004 Compressed air - Part 8: Test methods for solid particle content by mass concentration
ISO/DIS 1953:2022 Hard coal — Size analysis by sieving
ISO 14644-12:2018 Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
ISO 2030:1990 Granulated cork; size analysis by mechanical sieving
ISO 2030:2018 Granulated cork - Size analysis by mechanical sieving
ISO 14966:2019 Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
ISO/TR 23173:2021 Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings
ISO 7532:1985 Instant coffee - Size analysis
ISO 728:1974 Title missing - Legacy paper document
ISO 1953:1994 Hard coal - Size analysis by sieving
ISO 1953:2015 Hard coal - Size analysis by sieving
ISO 728:2021 Coke - Size analysis by sieving
ISO 16232-8:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis
ISO 9096:1992 Stationary source emissions; determination of concentration and mass flow rate of particulate material in gas-carrying ducts; manual gravimetric method
ISO 10155:1995 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
ISO 728:1995 Coke (nominal top size greater than 20 mm) - Size analysis by sieving
ISO 6344-3:2013 Coated abrasives.Grain size analysis.Part 3: Determination of grain size distribution of microgrits P240 to P2500
ISO 4150:1980 Green coffee — Size analysis — Manual sieving
ISO 16232-6:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis
ISO 2325:1979 Coke — Size analysis (Nominal top size 20 mm or less)
ISO 2325:1972 Title missing - Legacy paper document
ISO 2325:1986 Coke; Size analysis (Nominal top size 20 mm or less)
ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
ISO 22412:2008 Particle size analysis - Dynamic light scattering (DLS)

Institute of Environmental Sciences and Technology, Particle Concentration Analysis

IEST G-CC1002-1999 Determination of the Concentration of Airborne Ultrafine Particles

The American Road & Transportation Builders Association, Particle Concentration Analysis

AASHTO T 88-2000 Standard Method of Test Particle Size Analysis of Soils
AASHTO T311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials Twentieth Edition
AASHTO T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials

RO-ASRO, Particle Concentration Analysis

STAS 8179/3-1975 LOW-DENSITY POLYETHYLENE GRANULESMethods of analysis
STAS 9136-1980 COKE Grain size analysis
STAS 9144/7-1972 ZING POWDER Granulometric analysis
SR 8379-7-1995 Superphosphate - Grain size analysis
STAS 9475/2-1974 ION EXCHANGERS Size analysis
STAS SR 13355-3-1999 Beer. Analysis methods. Determination of alcoholic concentration

Korean Agency for Technology and Standards (KATS), Particle Concentration Analysis

KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 9096:2009 Stationary source emissions－Manual determination of mass concentration of particulate matter
KS I ISO 12141:2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS I ISO 14644-9:2014 Cleanrooms and associated controlled environments — Part 9: Classification of surface cleanliness by particle concentration
KS I ISO 14644-9:2019 Cleanrooms and associated controlled environments — Part 9:Classification of surface cleanliness by particle concentration
KS M ISO 2030:2020 Granulated cork — Size analysis by mechanical sieving
KS I ISO 14644-1-2017(2022) Cleanrooms and associated controlled environments — Part 1:Classification of air cleanliness by particle concentration
KS A ISO 9276-2:2003 Representation of results of particle size analysis-Part 2:Calculation of average particle sizes/diameters and moments from particle size distributions
KS A ISO 9276-2:2014 Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS M ISO 17830:2021 Solid biofuels — Particle size distribution of disintegrated pellets
KS B ISO 8573-8-2005(2010) Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS B ISO 8573-8:2005 Compressed air-Part 8:Test methods for solid particle content by mass concentration
KS B ISO 8573-8:2013 Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS M ISO 8511-2007(2022) Rubber compounding ingredients－Carbon black－Determination of pellet size distribution
KS M ISO 8511-2007(2017) Rubber compounding ingredients－Carbon black－Determination of pellet size distribution
KS L ISO 6344-1:2005 Coated abrasives-Grain size analysis-Part 1:Grain size distribution test
KS H ISO 11286-2007(2012) Tea－Classification of grades by particle size analysis
KS E ISO 728:2022 Coke — Size analysis by sieving
KS M 2105-2005 Methods of measuring dust concentration in flue gas
KS L ISO 14703:2001 Fine ceramics(advanced ceramics, advanced technical ceramics)-Sample preparation for the determination of particle size distribution of ceramic powders
KS L 6523-2016 Coated abrasives－Determination of grain size distribution of microgrits P12 to P220
KS L ISO 14703:2016 Fine ceramics(advanced ceramics, advanced technical ceramics)－Sample preparation for the determination of particle size distribution of ceramic powders
KS M ISO 2030:2004 Granulated cork－Size analysis by mechanical sieving
KS H ISO 7532:2002 Instant coffee－Size analysis
KS H ISO 7532:2007 Instant coffee－Size analysis
KS L ISO 6344-1-2005(2010) Coated abrasives－Grain size analysis－Part 1：Grain size distribution test
KS I ISO 14644-12:2020 Cleanrooms and associated controlled environments —Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
KS A 0095-2007(2017) Determination of particle size distribution by the weight of sedimentation in liquid
KS A ISO 13320:2022 Particle size analysis — Laser diffraction methods
KS I ISO 10155:2008 Stationary source emissions-Automated monitoring of mass concentrations of particles-Performance characteristics, test methods and specifications
KS I ISO 10155-2008(2018) Stationary source emissions－Automated monitoring of mass concentrations of particles－Performance characteristics, test methods and specifications
KS I ISO 14644-14:2018 Cleanrooms and associated controlled environments — Part 14: Assessment of suitability for use of equipment by airborne particle concentration
KS I ISO 14644-2-2017(2022) Cleanrooms and associated controlled environments — Part 2:Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
KS E ISO 1953:2002 Hard coal－Size analysis by sieving

German Institute for Standardization, Particle Concentration Analysis

DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
DIN EN ISO 14644-9:2022-10 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022); German version EN ISO 14644-9:2022
DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
DIN 66111 Bb.1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN EN ISO 14644-1:2016-06 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015); German version EN ISO 14644-1:2015
DIN 66118:1984 Particle size analysis; size analysis by air classification; fundamentals
DIN 66120:1983 Particle size analysis; size analysis by air classification with centrifugal counterflow classifier
DIN 66120:2016 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
DIN 66165-2:1987 Particle size analysis; sieve analysis; procedure
DIN CEN ISO/TS 19590:2019-11*DIN SPEC 19286:2019-11 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017); German version CEN ISO/TS 19590:2019
DIN EN 15415-3:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
DIN 50452-2:2009-10 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 2: Determination of particles by optical particle counters
DIN EN ISO 17830:2023-02 Solid biofuels - Particle size distribution of disintegrated pellets (ISO/DIS 17830:2023); German and English version prEN ISO 17830:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN ISO 17830 (2016-11).
DIN 66111:1989 Particle size analysis; sedimentation analysis; principles
DIN 66111:1989-02 Particle size analysis; sedimentation analysis; principles
DIN ISO 9276-6:2012-01 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology (ISO 9276-6:2008)
DIN ISO 6344-1:2000 Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (ISO 6344-1:1998)
DIN 66119:2016-10 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
DIN 66165-1:1987 Particle size analysis; sieve analysis; general principles
DIN EN 13205-4:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
DIN ISO 9276-6:2012 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology (ISO 9276-6:2008)
DIN 66165-2:2016 Particle size analysis - Sieving analysis - Part 2: Procedure
DIN 66119:2016 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
DIN 66119:1983 Particle size analysis; size analysis by air classification with gravitation-counterflow elutriator
DIN ISO 4387:2021-03 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine (ISO 4387:2019)
DIN EN ISO 17830:2016-11 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016); German version EN ISO 17830:2016 / Note: To be replaced by DIN EN ISO 17830 (2023-02).
DIN 66120:2016-10 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
DIN 66165-2:2016-08 Particle size analysis - Sieving analysis - Part 2: Procedure
DIN EN 13205-1:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements; German version EN 13205-1:2014
DIN ISO 6344-3:2000 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998)
DIN 50452-1:1995-11 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles
DIN EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
DIN ISO 13320:2022-12 Particle size analysis - Laser diffraction methods (ISO 13320:2020)
DIN 66165-1:2016 Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
DIN ISO 9136-1:2006-03 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004)
DIN 66165-1:2022 Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN 66165-1:2022-06 Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN 33899-3:2014-09 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN 66161:2010-10 Particle size analysis - Formula symbols, units
DIN 66115:1983-02 Particle size analysis; sedimentation analysis in the gravitational field; pipette method
DIN 66116-1:1973-11 Particle size analysis; sedimentation analysis in the gravitational field, sedimentation balance
DIN 66161:1985 Particle size analysis; formula symbols, units

中国气象局, Particle Concentration Analysis

QX/T 509-2019 GRIMM 180 Particulate Matter Concentration Monitor Calibration Specifications

HU-MSZT, Particle Concentration Analysis

Occupational Health Standard of the People's Republic of China, Particle Concentration Analysis

GBZ/T 192.6-2018 Determination of dust in the air of workplaces - Part 6: Ultrafine particles and total fine particle concentration

Group Standards of the People's Republic of China, Particle Concentration Analysis

T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions
T/SDAS 308-2021 Soil Particle Grading Analysis Laser Method
T/XZFW 004-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/XZFW 006-2023 Digital processor for monitoring results of low-concentration particulate matter in exhaust gas from fixed pollution sources
T/XZFW 010-2023 Stationary source emission —data processor for monitoring of particulate matter at low concentration
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle

ES-UNE, Particle Concentration Analysis

ISO/TS 24672:2023 Nanotechnologies — Guidance on the measurement of nanoparticle number concentration
UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol (Endorsed by Asociación Española de Normalización in January of 2021.)
UNE-EN ISO 14644-9:2022 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022)
UNE-EN ISO 14644-1:2016 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015)
UNE-EN ISO 17830:2016 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016)
ISO/DIS 17830:2023 Solid biofuels — Particle size distribution of disintegrated pellets
UNE 77219:1998 ERRATUM:2009 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications.
UNE-ISO 4387:2008/Amd.1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
UNE-ISO 4387:2008/Amd 2:2018 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.

Professional Standard - Meteorology, Particle Concentration Analysis

QX/T 72-2007 Determination of number size distribution of submicron particle by using Electrical Mobility Method

Association of German Mechanical Engineers, Particle Concentration Analysis

VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
VDI 2268 Blatt 3-1988 Chemical analysis of particulate matter; determination of thallium in particulate emissions by atomic absorption spectrometry
VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
VDI 2268 Blatt 1-1987 Chemical analysis of particulate matter; determination of Ba, Be, Cd, Co, Cr, Cu, Ni, Pb, Sr, V, Zn in particulate emissions by atomic spectrometric methods
VDI 2463 Blatt 11-1996 Particulate matter measurement - Measurement of mass concentration in ambient air - Filter method; Digitel DHA-80 filter changer

API - American Petroleum Institute, Particle Concentration Analysis

API PUBL 4076-1971 EMISSIONS@ CONCENTRATIONS@ AND FATE OF PARTICULATE ATMOSPHERIC POLLUTANTS

KR-KS, Particle Concentration Analysis

KS I ISO 12141-2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS I ISO 14644-9-2019 Cleanrooms and associated controlled environments — Part 9:Classification of surface cleanliness by particle concentration
KS I ISO 14644-1-2017 Cleanrooms and associated controlled environments — Part 1:Classification of air cleanliness by particle concentration
KS M ISO 2030-2020 Granulated cork — Size analysis by mechanical sieving
KS M ISO 17830-2021 Solid biofuels — Particle size distribution of disintegrated pellets
KS E ISO 728-2022 Coke — Size analysis by sieving
KS E ISO 1953-2018(2023) Hard coal — Size analysis by sieving
KS H ISO 7532-2002 Instant coffee－Size analysis
KS I ISO 14644-12-2020 Cleanrooms and associated controlled environments —Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
KS A ISO 13320-2022 Particle size analysis — Laser diffraction methods
KS I ISO 14644-14-2018 Cleanrooms and associated controlled environments — Part 14: Assessment of suitability for use of equipment by airborne particle concentration

CL-INN, Particle Concentration Analysis

INDITECNOR 20-14ch-1960

AR-IRAM, Particle Concentration Analysis

IRAM 17 017-1963

VN-TCVN, Particle Concentration Analysis

TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
TCVN 4198-1995 Construction earth.Gramlometric analysis
TCVN 251-2007 Hard coal.Size analysis by sieving
TCVN 6606-2000 Instant coffee.Size analysis
TCVN 5224-2009 Coke.Size analyses (Nominal top size 20 mm or less)
TCVN 5225-2007 Coke (nominal top size greater than 20 mm).Size analysis by sieving

AENOR, Particle Concentration Analysis

UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
UNE-EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
UNE-EN ISO 14644-9:2014 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
UNE-CEN/TR 13205-3:2015 IN Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
UNE 56918:1990 GRANULATED CORK. SIZE ANALISYS BY MECHANICAL SIEVING.
UNE 30062:1956 ANALYSIS REAGENTS. ALCOOL ETHYLIQUE OF 95%.
UNE-ISO 4387:2008 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
UNE-ISO 4387:2008/A1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
UNE-EN 13205-4:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Taiwan Provincial Standard of the People's Republic of China, Particle Concentration Analysis

CNS 15091-7-2007 Method of test for deep sea water - Determination of total suspended matters
CNS 11117-1984 Method for Size Analysis of Coke (Nominal Top Size Greater Than 20 mm)
CNS 11118-1984 Method for Size Analysis of Coke (Nominal Top Size 20mm or Less)
CNS 10942-1984 1
CNS 10944-1984 Method for Sieve Analysis of Coal
CNS 12385-1988 3
CNS 5086-1986 1

Professional Standard - Electricity, Particle Concentration Analysis

DL/T 1915-2018 Gravimetric method for testing technical specifications of low-concentration particulate matter in thermal power plants
DL/T 1978-2019 Classification standard for the degree of pollution of electric power oil particles

Xinjiang Provincial Standard of the People's Republic of China, Particle Concentration Analysis

DB65/T 602.12-2001 The determinanation of soil particle-size composition(mechanical composition

BR-ABNT, Particle Concentration Analysis

ABNT MB-32-1968

Professional Standard - Water Conservancy, Particle Concentration Analysis

SL 42-1992 Technical standard for determination of sediment particle size in open channels
SL 42-2010 Technical standard for determination of sediment particle size in open channels
SL 42-1992（条文说明） Technical standard for determination of sediment particle size in open channels(explanation)
SL 237-006-1999 Code for test of soil - grain size analysis test
SL/T 208-1998 Instrument for sediment measurement and particle size analysis in open channel

YU-JUS, Particle Concentration Analysis

JUS K.F0.002-1989 GraJns of fused aluminium oxide and silicon carbide for boodod abrasivc products. Grain si?e analysis of macrogrits F 4 to F 220
JUS K.F0.033-1989 GraJns of fused aluminium oxlde and sIlIcon carbide for coated abrasive producls. Grain slze analysis of microgrits P 240 to P 1200
JUS K.F0.032-1989 Grains of fused aluminium oxJde and slllcon carbide for coated abrasive products. Graln sir.e analysls of macrogrlts P 12 to P 220
JUS K.F0.004-1989 Gralns of fused alumlnium oxide and slllccm carbide for bonded abrasive. products. Grala si?e analysis of microgrits P 230 to F 1200
JUS H.P5.011-1991 Testing of pesticides.Dusts,granules,microgranules and water-dispersible powder.Determination of bulk density
JUS K.F0.001-1989 Grain si7.es of fused alumlnium oxlde and sIlicon carbide for bonded abrasive products. ?esignaticm and graJn slze distribution
JUS B.B8.036-1982 Crushed aggregate. Determination of fine particles with the wet sieve analysis

AASHTO - American Association of State Highway and Transportation Officials, Particle Concentration Analysis

T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials (Twentieth Edition)

North Atlantic Treaty Organization Standards Agency, Particle Concentration Analysis

STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

ZA-SANS, Particle Concentration Analysis

SANS 3001-GR2:2009 Civil engineering test methods Part GR2: Dry preparation and dry particle size analysis of graded materials
SANS 6079:1983 Size analysis of coal

RU-GOST R, Particle Concentration Analysis

GOST R ISO 9096-2006 Stationary source emissions. Manual determination of mass concentration of particulate matter
GOST R ISO 14644-1-2017 Cleanrooms and associated controlled environments. Part 1. Classification of air cleanliness by particle concentration
GOST R ISO 14644-1-2000 Cleanrooms and associated controlled environments. Part 1. Classification of air cleanliness
GOST R ISO 14644-9-2013 Cleanrooms and associated controlled environments. Part 9. Classification of surface cleanliness by particle concentration
GOST 34236-2017 Light and middle distillate fuels. Determination of sizing and counting particles by automatic particle counter
GOST R 55552-2013 Solid recovered fuels. Determination of particle size distribution. Part 3. Method by image analysis for large dimension particles
GOST 32518.2-2013 Iron ores, concentrates, agglomerates and pellets. Determination of silica spectrophotometric method
GOST R 55550-2013 Solid biofuels. Determination of particle size distribution of disintegrated pellets
GOST R ISO 12984-2015 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution

Hebei Provincial Standard of the People's Republic of China, Particle Concentration Analysis

DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

European Committee for Standardization (CEN), Particle Concentration Analysis

EN ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015)
PD CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
EN ISO 14644-9:2022 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022)
EN ISO 8049:2016 Ferronickel shot - Sampling for analysis
CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
PD CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
EN ISO 17830:2016 Solid biofuels - Particle size distribution of disintegrated pellets
prEN ISO 17830 Solid biofuels - Particle size distribution of disintegrated pellets (ISO/DIS 17830:2023)
EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers

Danish Standards Foundation, Particle Concentration Analysis

DS/EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration
DS/EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
DS/CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
DS/ISO 15900:2020 Determination of particle size distribution – Differential electrical mobility analysis for aerosol particles
DS/EN 16126:2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
DS/ISO 4387/Amd. 1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
DS/ISO 4387:2000 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
DS/ISO 1953:1994 Hard coal - Size analysis by sieving
DS/ISO 13320:2009 Particle size analysis - Laser diffraction methods

PL-PKN, Particle Concentration Analysis

PN Z04097 Arkusz 07-1974 Air purity protection Tests for size composition of dust Sieve analysis
PN C84001-13-1987 Sodium carbonate technical Size analysis

IN-BIS, Particle Concentration Analysis

NATO - North Atlantic Treaty Organization, Particle Concentration Analysis

STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +
AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (

未注明发布机构, Particle Concentration Analysis

BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS ISO 10155:1995(1999) Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications

PH-BPS, Particle Concentration Analysis

PNS ISO 14644-9:2021 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration
PNS ISO 14644-12:2021 Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
PNS ISO 14644-14:2021 Cleanrooms and associated controlled environments - Part 14: Assessment of suitability for use of equipment by airborne particle concentration
PNS ISO 6344-3:2021 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500

Qinghai Provincial Standard of the People's Republic of China, Particle Concentration Analysis

DB63/T 1873-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Liaoning Provincial Standard of the People's Republic of China, Particle Concentration Analysis

DB21/T 3270-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Shandong Provincial Standard of the People's Republic of China, Particle Concentration Analysis

DB37/T 3785-2019 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
DB37/T 2537-2014 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources in Shandong Province

Jiangxi Provincial Standard of the People's Republic of China, Particle Concentration Analysis

DB36/T 1386-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Inner Mongolia Provincial Standard of the People's Republic of China, Particle Concentration Analysis

DB15/T 2362-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Jilin Provincial Standard of the People's Republic of China, Particle Concentration Analysis

DB22/T 3426-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Standard Association of Australia （SAA）, Particle Concentration Analysis

AS ISO 14644.1:2017 Cleanrooms and associated controlled environments, Part 1: Classification of air cleanliness by particle concentration
AS/NZS 4616:1999 Abrasive grains and crudes - Chemical analysis of silicon carbide
AS 1038.18:2006 Coal and coke - Analysis and testing - Coke - Size analysis

Lithuanian Standards Office , Particle Concentration Analysis

LST EN 15415-3-2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
LST EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
LST EN 16126-2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
LST ISO 4387:2000 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

SE-SIS, Particle Concentration Analysis

SIS SS 02 84 26-1991 Air quality — Stationary source emissions — Determination of concentration and mass flow rate of particulate material in gas-carrying ducts — Manual gravimetric metod

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Particle Concentration Analysis

GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces
GB/T 15445.6-2014 Representation of results of particle size analysis—Part 6: Descriptive and quantitative representation of particle shape and morphology

GB-REG, Particle Concentration Analysis

REG NASA-LLIS-0846-2000 Lessons Learned ?Wear Particle Analysis Using Ferrography

CEN - European Committee for Standardization, Particle Concentration Analysis

EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2@5)
PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations

Hubei Provincial Standard of the People's Republic of China, Particle Concentration Analysis

DB42/T 1904-2022 Portable β-ray method for the determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

未注明发布机构, Particle Concentration Analysis

BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS ISO 10155:1995(1999) Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications

BE-NBN, Particle Concentration Analysis

NBN M 02-011-1988 Hard coal - Size analysis
NBN-ISO 2030:1992 Granulated cork. Size analysis by mechanical sieving
NBN T 03-421-1983 Aluminium oxide primarily used for the production of aluminium - Particle size analysis - Sieving method
NBN-ISO 2066:1992 Expanded pure agglomerated cork. Determination of moisture content
NBN B 11-052-1976
NBN B 11-013-1985
NBN B 11-001-1978

Professional Standard - Petroleum, Particle Concentration Analysis

SY/T 6542-2003 Core particle sizer
SY/T 5434-1999 Method of grain-size analysis of clastic rocks
SY/T 5434-2009 Analysis method for particle size of clastic rocks

Professional Standard - Ferrous Metallurgy, Particle Concentration Analysis

YB/T 4183-2009 Laser Diffraction Method for Determination of Particle Size Distribution of Smelting Slag Powder

IT-UNI, Particle Concentration Analysis

UNI 7549-P3-1976

CU-NC, Particle Concentration Analysis

NC 04-67-1985 Materials Testing. Metallic Powders. Granulometry Analysis by Sieving

Professional Standard - Construction Industry, Particle Concentration Analysis

JG/T 5066-1996 Determination of solid particulate contaminant in fluids by the gravimetric method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Particle Concentration Analysis

ASHRAE 4606-2003 Validation of a CFD Model for Temperature and Particulate Concentration in a Test Room with Mixed Air and Displacement Ventilation

国家能源局, Particle Concentration Analysis

SY/T 5434-2018 Clastic rock particle size analysis method

National Metrological Verification Regulations of the People's Republic of China, Particle Concentration Analysis

JJG 950-2012 Verification Regulation of Analyzers for Oil Content in Water

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Particle Concentration Analysis

IPC TM-650 2.2.14.2-1995 Solder Powder Particle Size Distribution - Optical Image Analyzer Method

TH-TISI, Particle Concentration Analysis

TIS 2574-2012 Airborne particulate matter sampling and analysis in workplace environment

Professional Standard - Petrochemical Industry, Particle Concentration Analysis

SH/T 0573-1993 In-use Lubricating Oil Wear Particle Test (Analytical Ferrography)

Indonesia Standards, Particle Concentration Analysis

SNI 3423-2008 Testing methods for analysis of grain soils size