ZH
RU
ES
Heater temperature control
Heater temperature control, Total:120 items.
In the international standard classification, Heater temperature control involves: Fluid power systems, Installations in buildings, Automatic controls for household use, Domestic, commercial and industrial heating appliances, Thermodynamics and temperature measurements, Valves, Materials for aerospace construction, Switchgear and controlgear, Road engineering, Linear and angular measurements, Aircraft and space vehicles in general, Electrical accessories, Ferrous metals, Iron and steel products, Vocabularies, Road vehicle systems, Test conditions and procedures in general, Refractories, Interface and interconnection equipment, Heat recovery. Thermal insulation, Fasteners, Protection against excessive pressure.
NEMA - National Electrical Manufacturers Association, Heater temperature control
- NEMA DC 10-1983 Residential Controls - Temperature Limit Controls for Electric Baseboard Heaters
- NEMA DC 10-2009 Residential Controls–Temperature Limit Controls for Electrical Baseboard Heaters
Korean Agency for Technology and Standards (KATS), Heater temperature control
- KS B 6612-2019 Automatic temperature control system for heating
- KS B 6613-2019 Test methods of automatic temperature control multi system for heating
- KS D 0411-2012 Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting
Association Francaise de Normalisation, Heater temperature control
- NF P52-701-1:1996 Controls for heating systems. Part 1 : outside temperature compensated control equipment for hot water heating systems.
- NF P52-702:2006 Temperature control devices and temperature limiters for heat generating systems.
- NF P52-702*NF EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
- NF P52-701-5:2006 Controls for heating systems - Part 5 : start-stop schedulers for heating systems.
- NF C46-207:1994 Measurement, control, regulation. Electrical temperature sensors. Isolating tubes for thermocouples.
- NF E31-356/IN1*NF EN 14394/IN1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 oC
- NF C47-121:1987 Automatic electrical controls for household use - Chrono proportional thermostats - All or nothing thermostats to be incorporated in fixed room heaters - Performance specifications
- NF UTE C46-201:1985 Mesure et commande dans les processus industriels - Capteurs de température à couples thermoélectriques - Prescriptions de qualification.
- NF P52-308-2*NF EN 14037-2:2016 Free hanging heating and cooling surfaces for water with a temperature below 120 oC - Part 2 : pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output
- NF EN 14037-1:2016 Panneaux rayonnants de chauffage et de rafraîchissement alimentés avec une eau à une température inférieure à 120oC - Partie 1 : panneaux rayonnants de plafond préfabriqués destinés au chauffage des locaux - Spécifications techniques et exige...
- UTE C46-201U*UTE C46-201:1985 Provisional prescriptions. Industrial process measurement and control. Temperature sensors using thermocouples. Quality assessment prescriptions.
British Standards Institution (BSI), Heater temperature control
- BS EN 12098-3:2003 Controls for heating systems. Outside temperature compensated control equipment for electrical heating systems
- BS EN 12098-3:2002 Controls for heating systems. Outside temperature compensated control equipment for electrical heating systems
- BS EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
- BS EN 14597:2005 Temperature control devices and temperature limiters for heat generating systems
- BS 2M 54:1991 Specification for temperature control in the heat treatment of metals
- BS EN 12098-5:2005 Controls for heating systems - Start-stop schedulers for heating systems
- BS EN 12098-5:2017 Energy Performance of Buildings. Controls for heating systems. Start-stop schedulers for heating systems. Modules M3-5,6,7,8
- BS EN 50113:1996 Measurement, control, regulation - Electrical temperature sensors - Isolating tubes for thermocouples
- BS EN 60947-8:2003+A2:2012 Low-voltage switchgear and controlgear. Control units for built-in thermal protection (PTC) for rotating electrical machines
- BS EN 14394:2005+A1:2008 Heating boilers - Heating boilers with forced draught burners -
Nominal heat output not exceeding 10 MW and maximum
operating temperature of 110 °C
- BS 6283-2:1991 Safety and control devices for use in hot water systems - Specifications for temperature relief valves for pressures from 1 bar to 10 bar
Lithuanian Standards Office , Heater temperature control
- LST EN 12098-1-2002 Controls for heating systems - Part 1: Outside temperature compensated control equipment for hot water heating systems
- LST EN 12098-3-2003 Controls for heating systems - Part 3: Outside temperature compensated control equipment for electrical heating systems
- LST EN 14597-2012 Temperature control devices and temperature limiters for heat generating systems
German Institute for Standardization, Heater temperature control
- DIN EN 14597:2015-02 Temperature control devices and temperature limiters for heat generating systems; German version EN 14597:2012
- DIN 43732:1986 Measurement and control; electrical temperature sensors; thermocouples for thermocouple thermometers
- DIN 43769:1986 Measurement and control; electrical temperature sensors; thermometers not fitted with protecting tubes
- DIN EN 14597:2015 Temperature control devices and temperature limiters for heat generating systems; German version EN 14597:2012
- DIN 43735:1986 Measurement and control; electrical temperature sensors; Sensor units for thermocouple thermometers
- DIN EN 14597:2005 Temperature control devices and temperature limiters for heat generating systems; English version of DIN EN 14597:2005
- DIN EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems; German version EN 14597:2012
- DIN 43772 Beiblatt 2:2015-06 Control technology - Protective tubes and extension tubes for liquid-in-glass thermometers, indicating mechanical thermometers, thermocouples and resistance thermometers; Supplement 2: Calculation of protective tubes
- DIN EN 12098-5:2005 Controls for heating systems - Part 5: Start-stop schedulers for heating systems; English version of DIN EN 12098-5:2005
- DIN 43772:2000-03 Control technology - Protective tubes and extension tubes for liquid-in-glass thermometers, dial thermometers, thermocouples and resistance thermometers - Dimensions, materials, testing / Note: To be amended by DIN 43772/A1 (2003-07).
- DIN 43772 Bb.1:2000 Control technology - Protective tubes and extention tubes for liquid-in-glass thermometers, dial thermometers, thermocouples and resistance thermometers - General review; assignment protective tube/thermometer
- DIN 43772:2000 Control technology - Protective tubes and extension tubes for liquid-in-glass thermometers, dial thermometers, thermocouples and resistance thermometers - Dimensions, materials, testing
- DIN 43772 Bb.2:2008 Control technology - Protective tubes and extension tubes for liquid-in-glass thermometers, dial thermometers, thermocouples and resistance thermometers - Calculation of protective tubes
- DIN 43735:2011-06 Process control technology - Electrical temperature sensors - Replaceable inserts for RTDs and thermocouples
- DIN 43772 Bb.2:2015 Control technology - Protective tubes and extension tubes for liquid-in-glass thermometers, indicating mechanical thermometers, thermocouples and resistance thermometers; Supplement 2: Calculation of protective tubes
- DIN EN 60947-8:2007 Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines (IEC 60947-8:2003 + A1:2006); German version EN 60947-8:2003 + A1:2006
- DIN EN 14037-2:2016-12 Free hanging heating and cooling surfaces for water with a temperature below 120 °C - Part 2: Pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output; German version EN 14037-2:2016
Danish Standards Foundation, Heater temperature control
- DS/EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
AENOR, Heater temperature control
- UNE-EN 14597:2014 Temperature control devices and temperature limiters for heat generating systems
- UNE 23585:2017 Fire safety. Smoke and heat control systems. Requirements, calculation and design methods for temperature control systems and smoke exhaust systems projecting in case of stationary fire.
- UNE-EN 14037-2:2017 Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 2: Pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output
United States Navy, Heater temperature control
- NAVY QPL-3155-2011 VALVE, TEMPERATURE REGULATING VENTILATION HEATER, STEAM CONTROL, NAVAL SHIPBOARD USE
- NAVY QPL-3155-16-2002 VALVE, TEMPERATURE REGULATING VENTILATION HEATER, STEAM CONTROL, NAVAL SHIPBOARD USE
- NAVY QPL-3155-2013 Valve, Temperature Regulating Ventilation Heater, Steam Control, Naval Shipboard Use
- NAVY MIL-DTL-3155 D-2013 VALVE, TEMPERATURE-REGULATING VENTILATION HEATER, STEAM CONTROL, NAVAL SHIPBOARD USE
European Committee for Standardization (CEN), Heater temperature control
- EN 12098-3:2002 Controls for heating systems - Part 3: Outside temperature compensated control equipment for electrical heating systems
- EN 12098-3:2013 Controls for heating systems - Part 3: Control equipment for electrical heating systems [Superseded: CEN EN 12098-4]
- EN 12098-3:2017 Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5@6@7@8
- EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
- prEN 50113-1993 Measurement, control, regulation; electrical temperature sensors; isolating tubes for thermocouples
- prEN 127-2-1980 CEN-heating boiler standard for boilers made from steel with operating temperatures exceeding 100 C and for steam
- EN 14394:2005 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C (Incorporates Amendment A1: 2008)
Standard Association of Australia （SAA）, Heater temperature control
- AS 4032.4:2014 Water supply — Valves for the control of heated water supply temperatures, Part 4: Thermostatically controlled taps for the control of heated water supply temperatures
- AS 4032.2:2005(R2015)/Amdt 2:2009
- AS 4032.2:2005(R2015)/Amdt 1:2006
- AS 4032.2:2005(R2015)
- AS 4032.3:2004 Water supply - Valves for the control of hot water supply temperatures - Requirements for field testing, maintenance or replacment of thermostatic mixing valves, tempering valves and end of line temperature control devices
- AS 4032.2:2005/AMD 2:2009 Amendment No. 2
to
AS 4032.2—2005
Water supply—Valves for the control of hot water supply temperatures
Part 2: Tempering valves and end-of-line temperature-actuated devices
- AS 4032.2:2005 Water supply - Valves for the control of hot water supply temperatures - Tempering valves and end-of-line temperature-actuated devices
- RUL PL.36-2007 Rulings to plumbing and piping systems Standards - Heated water temperature control (Legionella) (Ruling to AS/NZS 3500.4:2003)
CEN - European Committee for Standardization, Heater temperature control
- EN 14597:2005 Temperature control devices and temperature limiters for heat generating systems
Guangdong Provincial Standard of the People's Republic of China, Heater temperature control
SE-SIS, Heater temperature control
- SIS SS CECC 43003-1984 Blank detail specification: Directly heated negative temperature coefficient thermistors (Disc type)
Group Standards of the People's Republic of China, Heater temperature control
- T/ZZB 1514-2020 Liquid expansion pressure-type temperature control for heating appliance
- T/CASME 173-2022 Optical fiber grating temperature sensor temperature sensors for thermal control systems
- T/CASME 173-2023 Optical fiber grating temperature sensor temperature sensors for thermal control systems
- T/CASME 174-2023 Optical fiber grating temperature and humidity sensor for thermal control system
- T/CASME 174-2022 Optical fiber grating temperature and humidity sensor for thermal control system
AT-ON, Heater temperature control
- ONORM M 7425-2001 Temperature controls and limit switches for heat generating systems
American Welding Society (AWS), Heater temperature control
- WRC 334:1988 Review of Properties of Thermo-Mechanically Controlled Processed Steels - Pressure Vessel Steels for Low-Temperature Service
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Heater temperature control
- ASHRAE TO-98-5-3-1998 Feedforward-Feedback Controller Using General Regression Neural Network (GRNN) for Laboratory HVAC System: Part III - Temperature Control - Heating
- ASHRAE SA-96-10-4-1996 Field Experiences in Residential Humidification Control with Temperature-Compensated Automatic Humidistats
- ASHRAE 4371-2000 Adaptive Fuzzy Algorithm for Domestic Hot Water Temperature Control of a Combi-Boiler (The Full Text of This Paper Can Be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 6@ Number 2@ April 20
- ASHRAE LV-11-C022-2011 Experimental Investigation of a Machine Tool Cooler Using Hot-Gas By-Pass Valves for Temperature Control
American Society for Testing and Materials (ASTM), Heater temperature control
- ASTM D8162-20 Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
- ASTM D8162-20a Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
- ASTM A841/A841M-03a(2007) Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
- ASTM C680-89(2002) Standard Practice for Determination of Heat Gain or Loss and the Surface Temperatures of Insulated Pipe and Equipment Systems by the Use of a Computer Program
- ASTM A1066/A1066M-11 Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
YU-JUS, Heater temperature control
- JUS L.N4.201-1984 Operating conditions for industrial-process measurement and control equipment. Temperature, humidity and barometric pressure
- JUS L.F2.051-1987 Industn-il-process measurement and control. Industrial platinum resistance thermometer sensors
Defense Logistics Agency, Heater temperature control
Military Standards (MIL-STD), Heater temperature control
CENELEC - European Committee for Electrotechnical Standardization, Heater temperature control
- EN 50113:1994 Measurement@ Control@ Regulation Electrical Temperature Sensors Isolating Tubes for Thermocouples
- EN 144000:1993 Generic Specification: Directly Heated Positive Temperature Coefficient Thermistors Typically Made from Modified Ferro-Electric Materials
IN-BIS, Heater temperature control
WRC - Welding Research Council, Heater temperature control
- BULLETIN 334-1988 REVIEW OF PROPERTIES OF THERMO-MECHANICALLY CONTROLLED PROCESSED STEELS – PRESSURE VESSEL STEELS FOR LOW-TEMPERATURE SERVICE
国家能源局, Heater temperature control
- NB/T 10211-2019 Technical specifications for wind turbine blade electric heating anti-icing/de-icing control system
RU-GOST R, Heater temperature control
- GOST R EN 12098-5-2012 Measuring, operating and controls for heating systems. Part 5. Start-stop schedulers for heating systems
IX-EU/EC, Heater temperature control
- NO 811/2013-2013 REGULATIONS COMMISSION DELEGATED REGULATION supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of space heaters, combination heaters, packages of space heater, temperature control and solar
American National Standards Institute （ANSI), Heater temperature control
- ANSI/SAE J2229-1993 Accelerated Exposure of Automotive Interior Trim Materials Using an Outdoor Glass Variable Angle Controlled Temperature Apparatus
- ANSI/SAE J2230-1993 Accelerated Exposure of Automotive Interior Trim Materials Using Outdoor Under-Glass Controlled Sun-Tracking Temperature and Humidity Apparatus
International Organization for Standardization (ISO), Heater temperature control
- ISO 10059-2:2003 Dense, shaped refractory products - Determination of cold compressive strength - Part 2: Test with packing
- ISO 10059-1:1992 Dense, shaped refractory products; determination of cold compressive strength; part 1: referee test without packing
- ISO/IEC 29341-6-15:2008 Information technology – UPnP Device Architecture –
Part 6-15: Heating, Ventilation and Air Conditioning Device Control Protocol –
Temperature Sensor Service
- ISO/IEC 29341-6-16:2008 Information technology – UPnP Device Architecture –
Part 6-16: Heating, Ventilation and Air Conditioning Device Control Protocol –
Temperature Setpoint Service
CZ-CSN, Heater temperature control
- CSN 02 7202-1991 Mean of industrial-process measurement and control. Thermometer pockets with internal thread. Basic dimensions
未注明发布机构, Heater temperature control
- BS EN 144002:1995(2000) Specification for Harmonized system of quality assessment for electronic components — Blank detail specification — Directlyheatedpositive temperaturecoefficient thermistors primarily intended for heating element
- SAE J2230-202001 Accelerated Exposure of Automotive Interior Trim Material Using outdoor Under-Glass Controlled Sun-Tracking Temperature and humidity apparatus
Society of Automotive Engineers (SAE), Heater temperature control
- SAE J2229-1993 Accelerated Exposure of Automotive Interior Trim Materials Using an outdoor Under Glass Variable Angled Controlled Temperature apparatus
- SAE ARP690-2018 Standard Exposed Junction Thermocouple for Controlled Conduction Errors in Measurement of Air or Exhaust Gas Temperature
- SAE J2230-1993 Accelerated Exposure of Automotive Interior Trim Material Using outdoor Under-Glass Controlled Sun-Tracking Temperature and humidity apparatus
SAE - SAE International, Heater temperature control
- SAE J2229-2008 Accelerated Exposure of Automotive Interior Trim Materials Using an Outdoor Under Glass Variable Angle Controlled Temperature Apparatus
- SAE ARP690-1964 Standard Exposed Junction Thermocouple for Controlled Conduction Errors in Measurement of Air or Exhaust Gas Temperature
- SAE J2230-2020 Accelerated Exposure of Automotive Interior Trim Materials Using Outdoor Under-Glass Controlled Sun-Tracking Temperature and Humidity Apparatus@ Standard;
European Association of Aerospace Industries, Heater temperature control
- AECMA PREN 4126-1994 Aerospace Series Nuts, Anchor, Self-Locking, Floating, Two Lug, Reduced Series, with Incremental Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification: 900 MPa (at Ambient Temperature) /315 Degrees C Edition P1
- AECMA PREN 4125-1994 Aerospace Series Nuts, Anchor, Self-Locking, Fixed, Two Lug, Reduced Series, with Incremental Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification: 900 MPa (at Ambient Temperature) /315 Degrees C Edition P1
- AECMA PREN 4126-1993 Aerospace Series Nuts, Anchor, Self-Locking, Floating, Two Lug, Reduced Series, with Incremental Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification: 900 MPa (at Ambient Temperature) / 315 Degrees Celsius Edition P1